☰

Steven R. Nutt - Publications

Affiliations: 
Mechanical Engineering: Doctor of Philosophy University of Southern California, Los Angeles, CA, United States 
Area:
Mechanical Engineering, Materials Science Engineering
Website:
https://viterbi.usc.edu/directory/faculty/Nutt/Steven
Tree Info Similar researchers PubMed Report error

216 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Hu W, Centea T, Nutt S. Effects of material and process parameters on void evolution in unidirectional prepreg during vacuum bag-only cure: Journal of Composite Materials. 54: 633-645. DOI: 10.1177/0021998319864420  0.347
2020 Navarro CA, Giffin CR, Zhang B, Yu Z, Nutt SR, Williams TJ. A structural chemistry look at composites recycling Materials Horizons. DOI: 10.1039/D0Mh01085E  0.397
2020 Ma Y, Navarro CA, Williams TJ, Nutt SR. Recovery and reuse of acid digested amine/epoxy-based composite matrices Polymer Degradation and Stability. 175: 109125. DOI: 10.1016/J.Polymdegradstab.2020.109125  0.371
2020 Schechter SGK, Centea T, Nutt S. Effects of resin distribution patterns on through-thickness air removal in vacuum-bag-only prepregs Composites Part a-Applied Science and Manufacturing. 130: 105723. DOI: 10.1016/J.Compositesa.2019.105723  0.309
2020 Hu W, Centea T, Nutt S. Mechanisms of inter‐ply void formation during vacuum bag‐only cure of woven prepregs Polymer Composites. 41: 1785-1795. DOI: 10.1002/Pc.25497  0.303
2019 Zhang Y, Miyauchi M, Nutt S. Structure and properties of a phenylethynyl-terminated PMDA-type asymmetric polyimide High Performance Polymers. 31: 261-272. DOI: 10.1177/0954008318762592  0.309
2019 Lo J, Nutt S. Method for in situ analysis of volatiles generated during cure of composites Composites Part a: Applied Science and Manufacturing. 123: 141-148. DOI: 10.1016/J.Compositesa.2019.05.013  0.368
2019 Shin JH, Kim D, Centea T, Nutt SR. Thermoplastic prepreg with partially polymerized matrix: Material and process development for efficient part manufacturing Composites Part a-Applied Science and Manufacturing. 119: 154-164. DOI: 10.1016/J.Compositesa.2019.01.009  0.392
2019 Rokni MR, Feng P, Widener CA, Nutt SR. Depositing Al-Based Metallic Coatings onto Polymer Substrates by Cold Spray Journal of Thermal Spray Technology. 28: 1699-1708. DOI: 10.1007/S11666-019-00911-Y  0.3
2018 Yeh TW, Lin YT, Stewart LS, Dapkus PD, Sarkissian R, O'Brien JD, Ahn B, Nutt SR. Correction to InGaN/GaN Multiple Quantum Wells Grown on Nonpolar Facets of Vertical GaN Nanorod Arrays. Nano Letters. 18: 8070. PMID 30985152 DOI: 10.1021/Nl302264J  0.46
2018 Navarro CA, Kedzie EA, Ma Y, Michael KH, Nutt SR, Williams TJ. Mechanism and Catalysis of Oxidative Degradation of Fiber-Reinforced Epoxy Composites. Topics in Catalysis. 61: 704-709. PMID 30288016 DOI: 10.1007/S11244-018-0917-2  0.395
2018 Zhang Y, Miyauchi M, Nutt S. Moisture absorption and hydrothermal aging of phenylethynyl-terminated pyromellitic dianhydride-type asymmetric polyimide and composites High Performance Polymers. 31: 1020-1029. DOI: 10.1177/0954008318816754  0.388
2018 Zhang Y, Miyauchi M, Nutt S. Effects of thermal cycling on phenylethynyl-terminated PMDA-type asymmetric polyimide composites High Performance Polymers. 31: 861-871. DOI: 10.1177/0954008318804046  0.406
2018 Zhang Y, Jain A, Grunenfelder LK, Miyauchi M, Nutt S. Process development for phenylethynyl-terminated PMDA-type asymmetric polyimide composites: High Performance Polymers. 30: 731-741. DOI: 10.1177/0954008317720802  0.305
2018 Xu J, Wu Y, Gao X, Wu H, Nutt S, Yin S. Design of composite lattice materials combined with fabrication approaches Journal of Composite Materials. 53: 393-404. DOI: 10.1177/0021998318785710  0.355
2018 Hu W, Grunenfelder LK, Centea T, Nutt S. In situ monitoring and analysis of void evolution in unidirectional prepreg Journal of Composite Materials. 52: 2847-2858. DOI: 10.1177/0021998318759183  0.305
2018 Nilakantan G, Nutt S. Reuse and upcycling of thermoset prepreg scrap: Case study with out-of-autoclave carbon fiber/epoxy prepreg Journal of Composite Materials. 52: 341-360. DOI: 10.1177/0021998317707253  0.391
2018 Lo JN, Nutt SR, Williams TJ. Recycling Benzoxazine–Epoxy Composites via Catalytic Oxidation Acs Sustainable Chemistry & Engineering. 6: 7227-7231. DOI: 10.1021/Acssuschemeng.8B01790  0.374
2018 Ma Y, Nutt S. Chemical treatment for recycling of amine/epoxy composites at atmospheric pressure Polymer Degradation and Stability. 153: 307-317. DOI: 10.1016/J.Polymdegradstab.2018.05.011  0.392
2018 Xu J, Wu Y, Wang L, Li J, Yang Y, Tian Y, Gong Z, Zhang P, Nutt S, Yin S. Compressive properties of hollow lattice truss reinforced honeycombs (Honeytubes) by additive manufacturing: Patterning and tube alignment effects Materials & Design. 156: 446-457. DOI: 10.1016/J.Matdes.2018.07.019  0.363
2018 Nilakantan G, Nutt S. Effects of ply orientation and material on the ballistic impact behavior of multilayer plain-weave aramid fabric targets Defence Technology. 14: 165-178. DOI: 10.1016/J.Dt.2018.01.002  0.327
2018 Hamill L, Nutt S. Adhesion of metallic glass and epoxy in composite-metal bonding Composites Part B-Engineering. 134: 186-192. DOI: 10.1016/J.Compositesb.2017.09.044  0.395
2018 Schechter SGK, Centea T, Nutt SR. Polymer film dewetting for fabrication of out-of-autoclave prepreg with high through-thickness permeability Composites Part a-Applied Science and Manufacturing. 114: 86-96. DOI: 10.1016/J.Compositesa.2018.08.002  0.34
2018 Hofmann DC, Bordeenithikasem P, Dawson Z, Hamill L, Dillon RP, McEnerney B, Nutt S, Bradford SC. Investigating bulk metallic glasses as ball-and-cone locators for spacecraft deployable structures Aerospace Science and Technology. 513-519. DOI: 10.1016/J.Ast.2018.10.004  0.386
2018 Rokni MR, Nardi AT, Champagne VK, Nutt SR. Effects of Preprocessing on Multi-Direction Properties of Aluminum Alloy Cold-Spray Deposits Journal of Thermal Spray Technology. 27: 818-826. DOI: 10.1007/S11666-018-0723-1  0.332
2018 Hamill L, Emerson J, McGushion K, Nutt S. Low Frequency Eddy Current Testing of Insulators and Composites Journal of Nondestructive Evaluation. 37. DOI: 10.1007/S10921-018-0513-1  0.332
2018 Hu Y, Zhang Y, Nutt S. Thermal oxidation aging of polydicyclopentadiene and composites Polymer Composites. 39: 1742-1751. DOI: 10.1002/Pc.24125  0.41
2018 Hamill L, Hofmann DC, Nutt S. Galvanic Corrosion and Mechanical Behavior of Fiber Metal Laminates of Metallic Glass and Carbon Fiber Composites Advanced Engineering Materials. 20: 1700711. DOI: 10.1002/Adem.201700711  0.404
2017 Li M, Guo Q, Nutt S. Carbon nanotube/paraffin/montmorillonite composite phase change material for thermal energy storage. Solar Energy (Phoenix, Ariz.). 146: 1-7. PMID 28579647 DOI: 10.1016/J.Solener.2017.02.003  0.359
2017 Lo J, Zhang X, Williams T, Nutt S. Eliminating porosity via reformulation of a benzoxazine–epoxy resin transfer molding resin Journal of Composite Materials. 52: 1481-1493. DOI: 10.1177/0021998317727048  0.371
2017 Anders M, Zebrine D, Centea T, Nutt S. In Situ Observations and Pressure Measurements for Autoclave Co-Cure of Honeycomb Core Sandwich Structures Journal of Manufacturing Science and Engineering. 139. DOI: 10.1115/1.4037432  0.347
2017 Rokni MR, Widener CA, Champagne VK, Crawford GA, Nutt SR. The effects of heat treatment on 7075 Al cold spray deposits Surface & Coatings Technology. 310: 278-285. DOI: 10.1016/J.Surfcoat.2016.10.064  0.306
2017 Ma Y, Kim D, Nutt SR. Chemical treatment for dissolution of amine-cured epoxies at atmospheric pressure Polymer Degradation and Stability. 146: 240-249. DOI: 10.1016/J.Polymdegradstab.2017.10.014  0.371
2017 Jin BC, Li X, Jain A, González C, LLorca J, Nutt S. Optimization of microstructures and mechanical properties of composite oriented strand board from reused prepreg Composite Structures. 174: 389-398. DOI: 10.1016/J.Compstruct.2017.05.002  0.409
2017 Yin S, Li J, Liu B, Meng K, Huan Y, Nutt SR, Xu J. Honeytubes: Hollow lattice truss reinforced honeycombs for crushing protection Composite Structures. 160: 1147-1154. DOI: 10.1016/J.Compstruct.2016.11.007  0.429
2017 Kim D, Centea T, Nutt SR. Modelling and monitoring of out-time and moisture absorption effects on cure kinetics and viscosity for an out-of-autoclave (OoA) prepreg Composites Science and Technology. 138: 201-208. DOI: 10.1016/J.Compscitech.2016.11.023  0.309
2017 Jain A, Jin BC, Nutt S. Mean field homogenization methods for strand composites Composites Part B: Engineering. 124: 31-39. DOI: 10.1016/J.Compositesb.2017.05.036  0.359
2017 Grunenfelder LK, Dills A, Centea T, Nutt S. Effect of prepreg format on defect control in out-of-autoclave processing Composites Part a-Applied Science and Manufacturing. 93: 88-99. DOI: 10.1016/J.Compositesa.2016.10.027  0.319
2017 Rokni MR, Nutt SR, Widener CA, Champagne VK, Hrabe RH. Review of Relationship Between Particle Deformation, Coating Microstructure, and Properties in High-Pressure Cold Spray Journal of Thermal Spray Technology. 26: 1308-1355. DOI: 10.1007/S11666-017-0575-0  0.309
2017 Kim D, Nutt SR. Processability of DDS isomers-cured epoxy resin: Effects of amine/epoxy ratio, humidity, and out-time Polymer Engineering & Science. 58: 1530-1538. DOI: 10.1002/Pen.24738  0.377
2016 Ruan Q, Liberman D, Zhang Y, Ren D, Zhang Y, Nutt S, Moradian-Oldak J. Assembly of Layered Monetite-Chitosan Nanocomposite and Its Transition to Organized Hydroxyapatite. Acs Biomaterials Science & Engineering. 2: 1049-1058. PMID 28804756 DOI: 10.1021/Acsbiomaterials.6B00164  0.33
2016 Hu Y, Li X, Lang AW, Zhang Y, Nutt SR. Water immersion aging of polydicyclopentadiene resin and glass fiber composites Polymer Degradation and Stability. 124: 35-42. DOI: 10.1016/J.Polymdegradstab.2015.12.008  0.347
2016 Wu H, Fan G, Jin BC, Geng L, Cui X, Huang M, Li X, Nutt S. Enhanced fracture toughness of TiB w /Ti 3 Al composites with a layered reinforcement distribution Materials Science and Engineering: A. 670: 233-239. DOI: 10.1016/J.Msea.2016.06.026  0.355
2016 Anders M, Lo J, Centea T, Nutt SR. Eliminating volatile-induced surface porosity during resin transfer molding of a benzoxazine/epoxy blend Composites Part a: Applied Science and Manufacturing. 84: 442-454. DOI: 10.1016/J.Compositesa.2016.02.024  0.35
2015 Jin BC, Li X, Mier R, Pun A, Joshi S, Nutt S. Parametric modeling, higher order FEA and experimental investigation of hat-stiffened composite panels Composite Structures. 128: 207-220. DOI: 10.1016/J.Compstruct.2015.03.068  0.352
2015 Zhang Y, Sabbaghianrad S, Yang H, Topping TD, Langdon TG, Lavernia EJ, Schoenung JM, Nutt SR. Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5877-5886. DOI: 10.1007/S11661-015-3151-6  0.416
2015 Wu H, Jin BC, Geng L, Fan G, Cui X, Huang M, Hicks RM, Nutt S. Ductile-Phase Toughening in TiBw/Ti-Ti3Al Metallic-Intermetallic Laminate Composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. DOI: 10.1007/S11661-015-3025-Y  0.365
2015 Zhang Y, Topping TD, Yang H, Lavernia EJ, Schoenung JM, Nutt SR. Micro-strain Evolution and Toughening Mechanisms in a Trimodal Al-Based Metal Matrix Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1196-1204. DOI: 10.1007/S11661-014-2729-8  0.368
2015 Ma Y, Centea T, Nutt SR. Defect reduction strategies for the manufacture of contoured laminates using vacuum BAG-only prepregs Polymer Composites. DOI: 10.1002/Pc.23773  0.35
2014 Grunenfelder LK, Suksangpanya N, Salinas C, Milliron G, Yaraghi N, Herrera S, Evans-Lutterodt K, Nutt SR, Zavattieri P, Kisailus D. Bio-inspired impact-resistant composites. Acta Biomaterialia. 10: 3997-4008. PMID 24681369 DOI: 10.1016/J.Actbio.2014.03.022  0.409
2014 Yin S, Wu L, Yang J, Ma L, Nutt S. Damping and low-velocity impact behavior of filled composite pyramidal lattice structures Journal of Composite Materials. 48: 1789-1800. DOI: 10.1177/0021998313490582  0.401
2014 Yin S, Wu L, Nutt S. In-plane compression of hollow composite pyramidal lattice sandwich columns Journal of Composite Materials. 48: 1337-1346. DOI: 10.1177/0021998313485309  0.398
2014 Rojdev K, O'Rourke MJE, Hill C, Nutt S, Atwell W. Radiation effects on composites for long-duration lunar habitats Journal of Composite Materials. 48: 861-878. DOI: 10.1177/0021998313479416  0.402
2014 Hu Y, Lang AW, Li X, Nutt SR. Hygrothermal aging effects on fatigue of glass fiber/polydicyclopentadiene composites Polymer Degradation and Stability. 110: 464-472. DOI: 10.1016/J.Polymdegradstab.2014.10.018  0.389
2014 Yin S, Wu L, Nutt SR. Compressive efficiency of stretch-stretch-hybrid hierarchical composite lattice cores Materials and Design. 56: 731-739. DOI: 10.1016/J.Matdes.2013.11.012  0.352
2014 Nilakantan G, Nutt S. Effects of clamping design on the ballistic impact response of soft body armor Composite Structures. 108: 13-150. DOI: 10.1016/J.Compstruct.2013.09.017  0.305
2014 Kim D, Centea T, Nutt SR. In-situ cure monitoring of an out-of-autoclave prepreg: Effects of out-time on viscosity, gelation and vitrification Composites Science and Technology. 102: 132-138. DOI: 10.1016/J.Compscitech.2014.07.027  0.353
2014 Zhang Y, Topping TD, Lavernia EJ, Nutt SR. Dynamic micro-strain analysis of ultrafine-grained aluminum magnesium alloy using digital image correlation Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 47-54. DOI: 10.1007/S11661-013-1805-9  0.308
2014 Yuan L, Huang S, Hu Y, Zhang Y, Gu A, Liang G, Chen G, Gao Y, Nutt S. Poly(phenylene oxide) modified cyanate resin for self‐healing Polymers For Advanced Technologies. 25: 752-759. DOI: 10.1002/Pat.3290  0.325
2014 Hamill L, Roberts S, Davidson M, Johnson WL, Nutt S, Hofmann DC. Hypervelocity impact phenomenon in bulk metallic glasses and composites Advanced Engineering Materials. 16: 85-93. DOI: 10.1002/Adem.201300252  0.371
2013 Huang T, Xin Y, Li T, Nutt S, Su C, Chen H, Liu P, Lai Z. Modified graphene/polyimide nanocomposites: reinforcing and tribological effects. Acs Applied Materials & Interfaces. 5: 4878-4891. PMID 23672284 DOI: 10.1021/Am400635X  0.322
2013 Topping TD, Ahn B, Nutt SR, Lavernia EJ. Influence of hot isostatic pressing on microstructure and mechanical behaviour of nanostructured Al alloy Powder Metallurgy. 56: 276-287. DOI: 10.1179/1743290112Y.0000000034  0.538
2013 Rojdev K, O'Rourke MJE, Hill C, Nutt S, Atwell W. In-situ strain analysis of potential habitat composites exposed to a simulated long-term lunar radiation exposure Radiation Physics and Chemistry. 84: 235-241. DOI: 10.1016/J.Radphyschem.2012.05.004  0.315
2013 Castro G, Nutt SR, Wenchen X. Compression and low-velocity impact behavior of aluminum syntactic foam Materials Science and Engineering A. 578: 222-229. DOI: 10.1016/J.Msea.2013.04.081  0.344
2013 Jin L, Jin BC, Kar N, Nutt S, Sun B, Gu B. Tension–tension fatigue behavior of layer-to-layer 3-D angle-interlock woven composites Materials Chemistry and Physics. 140: 183-190. DOI: 10.1016/J.Matchemphys.2013.03.020  0.346
2013 Yin S, Wu L, Nutt S. Stretch-bend-hybrid hierarchical composite pyramidal lattice cores Composite Structures. 98: 153-159. DOI: 10.1016/J.Compstruct.2012.11.004  0.369
2013 Yuan L, Huang S, Gu A, Liang G, Chen F, Hu Y, Nutt S. A cyanate ester/microcapsule system with low cure temperature and self-healing capacity Composites Science and Technology. 87: 111-117. DOI: 10.1016/J.Compscitech.2013.08.005  0.312
2013 Grunenfelder LK, Centea T, Hubert P, Nutt SR. Effect of room-temperature out-time on tow impregnation in an out-of-autoclave prepreg Composites Part a: Applied Science and Manufacturing. 45: 119-126. DOI: 10.1016/J.Compositesa.2012.10.001  0.357
2013 Yin S, Jacobsen AJ, Wu L, Nutt SR. Inertial stabilization of flexible polymer micro-lattice materials Journal of Materials Science. 48: 6558-6566. DOI: 10.1007/S10853-013-7452-0  0.719
2013 Yuan L, Chen F, Gu A, Liang G, Lin C, Huang S, Nutt S, Chen G, Gao Y. Synthesis of poly(urea–formaldehyde) encapsulated dibutyltin dilaurate through the self-catalysis of core materials Polymer Bulletin. 71: 261-273. DOI: 10.1007/S00289-013-1059-0  0.308
2012 Naify CJ, Chang CM, McKnight G, Nutt SR. Scaling of membrane-type locally resonant acoustic metamaterial arrays. The Journal of the Acoustical Society of America. 132: 2784-92. PMID 23039544 DOI: 10.1121/1.4744941  0.667
2012 Yeh TW, Lin YT, Stewart LS, Dapkus PD, Sarkissian R, O'Brien JD, Ahn B, Nutt SR. InGaN/GaN multiple quantum wells grown on nonpolar facets of vertical GaN nanorod arrays. Nano Letters. 12: 3257-62. PMID 22587013 DOI: 10.1021/Nl301307A  0.489
2012 Yeh TW, Lin YT, Ahn B, Stewart LS, Daniel Dapkus P, Nutt SR. Vertical nonpolar growth templates for light emitting diodes formed with GaN nanosheets Applied Physics Letters. 100. DOI: 10.1063/1.3671182  0.508
2012 Fang M, Tang Z, Lu H, Nutt S. Multifunctional superhydrophobic composite films from a synergistic self-organization process Journal of Materials Chemistry. 22: 109-114. DOI: 10.1039/C1Jm13213J  0.319
2012 Castro G, Nutt SR. Synthesis of syntactic steel foam using gravity-fed infiltration Materials Science and Engineering A. 553: 89-95. DOI: 10.1016/J.Msea.2012.05.097  0.633
2012 Castro G, Nutt SR. Synthesis of syntactic steel foam using mechanical pressure infiltration Materials Science and Engineering A. 535: 274-280. DOI: 10.1016/J.Msea.2011.12.084  0.647
2012 Kar NK, Hu Y, Ahn B, Nutt SR. Diametral compression of pultruded composite rods Composites Science and Technology. 72: 1283-1290. DOI: 10.1016/J.Compscitech.2012.05.001  0.586
2012 Kar NK, Hu Y, Barjasteh E, Nutt SR. Tension-tension fatigue of hybrid composite rods Composites Part B: Engineering. 43: 2115-2124. DOI: 10.1016/J.Compositesb.2012.03.006  0.798
2012 Yin S, Wu L, Ma L, Nutt S. Hybrid truss concepts for carbon fiber composite pyramidal lattice structures Composites Part B: Engineering. 43: 1749-1755. DOI: 10.1016/J.Compositesb.2012.01.033  0.421
2012 Barjasteh E, Nutt SR. Moisture absorption of unidirectional hybrid composites Composites Part a: Applied Science and Manufacturing. 43: 158-164. DOI: 10.1016/j.compositesa.2011.10.003  0.792
2012 Topping TD, Ahn B, Li Y, Nutt SR, Lavernia EJ. Influence of process parameters on the mechanical behavior of an ultrafine-grained Al alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 505-519. DOI: 10.1007/S11661-011-0849-Y  0.565
2012 Yuan L, Gu A, Nutt S, Wu J, Lin C, Chen F, Liang G. Novel polyphenylene oxide microcapsules filled with epoxy resins Polymers For Advanced Technologies. 24: 81-89. DOI: 10.1002/Pat.3053  0.4
2011 Naify CJ, Nutt S. Multifunctional acoustic metamaterial composites The Journal of the Acoustical Society of America. 130: 2326-2326. DOI: 10.1121/1.3654304  0.696
2011 Naify CJ, Chang C, McKnight G, Nutt S. Acoustic analysis of honeycomb sandwich structures with perforated septa and membrane‐type acoustic metamaterials. The Journal of the Acoustical Society of America. 129: 2417-2417. DOI: 10.1121/1.3587886  0.724
2011 Nutt S, Naify CJ. Designs for construction of quiet composite sandwich structures. The Journal of the Acoustical Society of America. 129: 2416-2416. DOI: 10.1121/1.3587882  0.712
2011 Yeh T, Dapkus PD, Lin Y, Stewart L, Ahn B, Nutt S. InGaN/GaN nanorod and nanosheet arrays for InGaN-based LEDs Photomedicine and Laser Surgery. 385-386. DOI: 10.1109/Pho.2011.6110589  0.495
2011 Naify CJ, Chang CM, McKnight G, Nutt S. Transmission loss of membrane-type acoustic metamaterials with coaxial ring masses Journal of Applied Physics. 110. DOI: 10.1063/1.3665213  0.652
2011 Naify CJ, Chang CM, McKnight G, Scheulen F, Nutt S. Membrane-type metamaterials: Transmission loss of multi-celled arrays Journal of Applied Physics. 109. DOI: 10.1063/1.3583656  0.658
2011 Yin S, Wu L, Ma L, Nutt S. Pyramidal lattice sandwich structures with hollow composite trusses Composite Structures. 93: 3104-3111. DOI: 10.1016/J.Compstruct.2011.06.025  0.425
2011 Barjasteh E, Kar N, Nutt SR. Effect of filler on thermal aging of composites for next-generation power lines Composites Part a: Applied Science and Manufacturing. 42: 1873-1882. DOI: 10.1016/j.compositesa.2011.08.006  0.795
2011 Kar NK, Barjasteh E, Hu Y, Nutt SR. Bending fatigue of hybrid composite rods Composites Part a: Applied Science and Manufacturing. 42: 328-336. DOI: 10.1016/j.compositesa.2010.12.012  0.794
2011 Jacobsen AJ, Mahoney S, Carter WB, Nutt S. Vitreous carbon micro-lattice structures Carbon. 49: 1025-1032. DOI: 10.1016/J.Carbon.2010.10.059  0.719
2011 Kar NK, Barjasteh E, Hu Y, Nutt SR. Fatigue life and failure mechanisms of hybrid composite rods International Sampe Technical Conference.  0.785
2011 Naify CJ, Chang CM, McKnight G, Nutt SR. Experimental and FEA evaluation of membrane-type locally resonant acoustic metamaterial arrays for aircraft interior sound insulation 17th Aiaa/Ceas Aeroacoustics Conference 2011 (32nd Aiaa Aeroacoustics Conference).  0.644
2010 Desai AA, Basbagill J, Nutt SR, Alonso MV. Diffusivity and climatic simulation of hybrid foams Journal of Cellular Plastics. 46: 461-478. DOI: 10.1177/0021955X10373641  0.376
2010 Desai AA, Nutt SR, Alonso MV. Modeling of hybrid composite foams Journal of Cellular Plastics. 46: 113-128. DOI: 10.1177/0021955X09351195  0.421
2010 Wang T, Li S, Rajaram S, Nutt SR. Predicting the sound transmission loss of sandwich panels by statistical energy analysis approach Journal of Vibration and Acoustics, Transactions of the Asme. 132: 0110041-0110047. DOI: 10.1115/1.4000459  0.508
2010 Naify CJ, Chang CM, McKnight G, Nutt S. Transmission loss and dynamic response of membrane-type locally resonant acoustic metamaterials Journal of Applied Physics. 108. DOI: 10.1063/1.3514082  0.66
2010 Wong M, Tsuji R, Nutt S, Sue HJ. Glass transition temperature changes of melt-blended polymer nanocomposites containing finely dispersed ZnO quantum dots Soft Matter. 6: 4482-4490. DOI: 10.1039/B927182A  0.302
2010 Grunenfelder LK, Nutt SR. Void formation in composite prepregs - Effect of dissolved moisture Composites Science and Technology. 70: 2304-2309. DOI: 10.1016/J.Compscitech.2010.09.009  0.38
2010 Peters P, Nutt S. Wave speeds of honeycomb sandwich structures: An experimental approach Applied Acoustics. 71: 115-119. DOI: 10.1016/J.Apacoust.2009.07.017  0.77
2010 Lee Z, Radmilovic V, Ahn B, Lavernia EJ, Nutt SR. Tensile deformation and fracture mechanism of bulk bimodal ultrafine-grained Al-Mg alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 795-801. DOI: 10.1007/S11661-009-0007-Y  0.648
2010 Ahn B, Nutt SR. Strain mapping of Al-Mg alloy with multi-scale grain structure using digital image correlation method Experimental Mechanics. 50: 117-123. DOI: 10.1007/S11340-008-9211-8  0.48
2010 Ahn B, Mitra R, Lavernia EJ, Nutt SR. Effect of grain size on strain rate sensitivity of cryomilled Al-Mg alloy Journal of Materials Science. 45: 4790-4795. DOI: 10.1007/S10853-010-4664-4  0.549
2010 Wang CH, Shieh YT, Guo G, Nutt S. Effects of organophilic-modified attapulgite nanorods on thermal and mechanical behavior of segmented polyurethane elastomers Polymer Composites. 31: 1890-1898. DOI: 10.1002/Pc.20985  0.559
2010 Huang YJ, Wang CH, Huang YL, Guo G, Nutt SR. Enhancing specific strength and stiffness of phenolic microsphere syntactic foams through carbon fiber reinforcement Polymer Composites. 31: 256-262. DOI: 10.1002/Pc.20795  0.717
2009 Peters P, Nutt S, Sneddon M. Measurements of loss factors of honeycomb sandwich structures Noise Control Engineering Journal. 57: 27-31. DOI: 10.3397/1.3021417  0.778
2009 Tsai YI, Bosze EJ, Barjasteh E, Nutt SR. Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid composites Composites Science and Technology. 69: 432-437. DOI: 10.1016/j.compscitech.2008.11.012  0.795
2009 Barjasteh E, Bosze EJ, Tsai YI, Nutt SR. Thermal aging of fiberglass/carbon-fiber hybrid composites Composites Part a: Applied Science and Manufacturing. 40: 2038-2045. DOI: 10.1016/j.compositesa.2009.09.015  0.799
2009 Chen W, Shen H, Auad ML, Huang C, Nutt S. Basalt fiber–epoxy laminates with functionalized multi-walled carbon nanotubes Composites Part a-Applied Science and Manufacturing. 40: 1082-1089. DOI: 10.1016/J.Compositesa.2009.04.027  0.588
2009 Wang T, Li S, Nutt SR. Optimal design of acoustical sandwich panels with a genetic algorithm Applied Acoustics. 70: 416-425. DOI: 10.1016/J.Apacoust.2008.06.003  0.555
2009 Wang CH, Shieh YT, Nutt S. The effects of soft-segment molecular weight and organic modifier on properties of organic-modified MMT-PU nanocomposites Journal of Applied Polymer Science. 114: 1025-1032. DOI: 10.1002/App.30560  0.555
2009 Kar NK, Tsai YI, Barjasteh E, Bosze EJ, Nutt SR. Accelerated aging and durability of composite rods for power transmission lines Iccm International Conferences On Composite Materials.  0.8
2008 Desai A, Nutt SR, Alonso MV. Modeling of fiber-reinforced phenolic foam Journal of Cellular Plastics. 44: 391-413. DOI: 10.1177/0021955X08091960  0.608
2008 Desai A, Auad ML, Hongbin Shen, Nutt SR. Mechanical behavior of hybrid composite phenolic foam Journal of Cellular Plastics. 44: 15-36. DOI: 10.1177/0021955X07078021  0.632
2008 Pan Y, Xu Y, An L, Lu H, Yang Y, Chen W, Nutt S. Hybrid Network Structure and Mechanical Properties of Rodlike Silicate/Cyanate Ester Nanocomposites Macromolecules. 41: 9245-9258. DOI: 10.1021/Ma800819S  0.336
2008 Murphy EB, Bolanos E, Schaffner-Hamann C, Wudl F, Nutt SR, Auad ML. Synthesis and characterization of a single-component thermally remendable polymer network: Staudinger and stille revisited Macromolecules. 41: 5203-5209. DOI: 10.1021/Ma800432G  0.338
2008 Newbery AP, Ahn B, Topping TD, Pao PS, Nutt SR, Lavernia EJ. Large UFG Al alloy plates from cryomilling Journal of Materials Processing Technology. 203: 37-45. DOI: 10.1016/J.Jmatprotec.2007.09.078  0.501
2008 Wang T, Sokolinsky V, Rajaram S, Nutt SR. Consistent higher-order free vibration analysis of composite sandwich plates Composite Structures. 82: 609-621. DOI: 10.1016/J.Compstruct.2007.02.009  0.543
2008 Chen W, Lu H, Nutt SR. The influence of functionalized MWCNT reinforcement on the thermomechanical properties and morphology of epoxy nanocomposites Composites Science and Technology. 68: 2535-2542. DOI: 10.1016/J.Compscitech.2008.05.011  0.359
2008 Jacobsen AJ, Barvosa-Carter W, Nutt S. Micro-scale truss structures with three-fold and six-fold symmetry formed from self-propagating polymer waveguides Acta Materialia. 56: 2540-2548. DOI: 10.1016/J.Actamat.2008.01.051  0.702
2008 Jacobsen AJ, Barvosa-Carter W, Nutt S. Shear behavior of polymer micro-scale truss structures formed from self-propagating polymer waveguides Acta Materialia. 56: 1209-1218. DOI: 10.1016/J.Actamat.2007.11.018  0.723
2008 Song Z, Nutt S. Expansion mechanisms in foaming aluminum melts Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2215-2227. DOI: 10.1007/S11661-008-9573-7  0.337
2008 Newbery AP, Ahn B, Hayes RW, Pao PS, Nutt SR, Lavernia EJ. Consolidation and forging methods for a cryomilled Al alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2193-2205. DOI: 10.1007/S11661-008-9554-X  0.499
2008 Ahn B, Lavernia EJ, Nutt SR. Dynamic observations of deformation in an ultrafine-grained Al-Mg alloy with bimodal grain structure Journal of Materials Science. 43: 7403-7408. DOI: 10.1007/S10853-008-2950-1  0.54
2008 Wang CH, Auad ML, Marcovich NE, Nutt S. Synthesis and characterization of organically modified attapulgite/ polyurethane nanocomposites Journal of Applied Polymer Science. 109: 2562-2570. DOI: 10.1002/App.28254  0.568
2008 Barjasteh E, Bosze EJ, Nutt SR. Thermal oxidation of anhydride cured epoxy and epoxy matrix composites International Sampe Symposium and Exhibition (Proceedings). 52.  0.802
2008 Tsai YI, Bosze EJ, Nutt SR. The hygrothermal influence on thermal and mechanical properties of a hybrid glass / carbon fiber reinforced composite materials International Sampe Symposium and Exhibition (Proceedings). 52.  0.325
2007 Tang F, Liao CP, Ahn B, Nutt SR, Schoenung JM. Thermal stability in nanostructured Al-5083/SiCp composites fabricated by cryomilling Powder Metallurgy. 50: 307-312. DOI: 10.1179/174329007X189630  0.524
2007 Song Z, Nutt SR. Rheology of foaming aluminum melts Materials Science and Engineering A. 458: 108-115. DOI: 10.1016/J.Msea.2006.12.105  0.352
2007 Ahn B, Newbery AP, Lavernia EJ, Nutt SR. Effect of degassing temperature on the microstructure of a nanocrystalline Al-Mg alloy Materials Science and Engineering A. 463: 61-66. DOI: 10.1016/J.Msea.2006.07.158  0.566
2007 Jacobsen AJ, Barvosa-Carter W, Nutt S. Compression behavior of micro-scale truss structures formed from self-propagating polymer waveguides Acta Materialia. 55: 6724-6733. DOI: 10.1016/J.Actamat.2007.08.036  0.718
2007 Auad ML, Zhao L, Shen H, Nutt SR, Sorathia U. Flammability properties and mechanical performance of epoxy modified phenolic foams Journal of Applied Polymer Science. 104: 1399-1407. DOI: 10.1002/App.24405  0.561
2007 Jacobsen AJ, Barvosa-Carter W, Nutt S. Micro-scale truss structures formed from self-propagating photopolymer waveguides Advanced Materials. 19: 3892-3896. DOI: 10.1002/Adma.200700797  0.7
2007 Alawar AA, Bosze EJ, Nutt SR. High temperature strength and creep of an Al conductor with a hybrid composite core Iccm International Conferences On Composite Materials.  0.79
2006 Rajaram S, Wang T, Nutt S. Sound transmission loss of honeycomb sandwich panels Noise Control Engineering Journal. 54: 106-115. DOI: 10.3397/1.2888387  0.552
2006 Nakahara H, Nutt S. Compounds in solid electrolyte interface (SEI) on carbonaceous material charged in siloxane-based electrolyte Journal of Power Sources. 160: 1355-1360. DOI: 10.1016/J.Jpowsour.2006.02.088  0.535
2006 Nakahara H, Tanaka M, Yoon SY, Nutt S. Electrochemical and thermal stability of a siloxane-based electrolyte on a lithium transition metal oxide cathode Journal of Power Sources. 160: 645-650. DOI: 10.1016/J.Jpowsour.2006.01.084  0.546
2006 Nakahara H, Yoon SY, Nutt S. Passive film formation on a graphite electrode: Effect of siloxane structures Journal of Power Sources. 160: 548-557. DOI: 10.1016/J.Jpowsour.2006.01.013  0.53
2006 Nakahara H, Nutt S. Effect of an electrolyte salt dissolving in polysiloxane-based electrolyte on passive film formation on a graphite electrode Journal of Power Sources. 158: 1386-1393. DOI: 10.1016/J.Jpowsour.2005.10.042  0.525
2006 Nakahara H, Yoon SY, Nutt S. Effect of an additive to polysiloxane-based electrolyte on passive film formation on a graphite electrode Journal of Power Sources. 158: 600-607. DOI: 10.1016/J.Jpowsour.2005.09.050  0.514
2006 Nakahara H, Yoon S, Piao T, Mansfeld F, Nutt S. Analysis of the passive surface film on a graphite electrode charged in polysiloxane-based electrolyte Journal of Power Sources. 158: 591-599. DOI: 10.1016/J.Jpowsour.2005.09.041  0.524
2006 Chen W, Auad ML, Williams RJJ, Nutt SR. Improving the dispersion and flexural strength of multiwalled carbon nanotubes-stiff epoxy composites through β-hydroxyester surface functionalization coupled with the anionic homopolymerization of the epoxy matrix European Polymer Journal. 42: 2765-2772. DOI: 10.1016/J.Eurpolymj.2006.04.016  0.382
2006 Alawar A, Bosze EJ, Nutt SR. A hybrid numerical method to calculate the sag of composite conductors Electric Power Systems Research. 76: 389-394. DOI: 10.1016/j.epsr.2005.09.006  0.754
2006 Bosze EJ, Alawar A, Bertschger O, Tsai YI, Nutt SR. High-temperature strength and storage modulus in unidirectional hybrid composites Composites Science and Technology. 66: 1963-1969. DOI: 10.1016/j.compscitech.2006.01.020  0.792
2006 Alonso MV, Auad ML, Nutt SR. Modeling the compressive properties of glass fiber reinforced epoxy foam using the analysis of variance approach Composites Science and Technology. 66: 2126-2134. DOI: 10.1016/J.Compscitech.2005.12.016  0.325
2006 Huang YJ, Vaikhanski L, Nutt SR. 3D long fiber-reinforced syntactic foam based on hollow polymeric microspheres Composites Part a: Applied Science and Manufacturing. 37: 488-496. DOI: 10.1016/J.Compositesa.2005.02.014  0.597
2006 Alonso MV, Auad ML, Sorathia U, Marcovich NE, Nutt SR. Barrier properties for short-fiber-reinforced epoxy foams Journal of Applied Polymer Science. 102: 3266-3272. DOI: 10.1002/App.24693  0.314
2006 Auad ML, Nutt SR, Stefani PM, Aranguren MI. Rheological study of the curing kinetics of epoxy-phenol novolac resin Journal of Applied Polymer Science. 102: 4430-4439. DOI: 10.1002/App.24674  0.331
2006 Desai A, Auad ML, Shen H, Nutt SR. Hybrid composite phenolic foam International Sampe Symposium and Exhibition (Proceedings). 51.  0.337
2006 Bosze EJ, Alawar A, Tsai YI, Nutt SR. Performance of a new overhead conductor design using a carbon/glass fiber composite core International Sampe Symposium and Exhibition (Proceedings). 51.  0.785
2005 Li S, Wang T, Nutt SR. Transmission loss assessments of sandwich structures by using a combination of finite element and boundary element methods 19th National Conference On Noise Control Engineering 2005, Noise-Con 05. 1: 464-471. DOI: 10.1121/1.4778581  0.511
2005 Alawar A, Bosze EJ, Nutt SR. A composite core conductor for low sag at high temperatures Ieee Transactions On Power Delivery. 20: 2193-2199. DOI: 10.1109/TPWRD.2005.848736  0.791
2005 Ye J, Han BQ, Lee Z, Ahn B, Nutt SR, Schoenung JM. A tri-modal aluminum based composite with super-high strength Scripta Materialia. 53: 481-486. DOI: 10.1016/J.Scriptamat.2005.05.004  0.668
2005 Lee Z, Witkin DB, Radmilovic V, Lavernia EJ, Nutt SR. Bimodal microstructure and deformation of cryomilled bulk nanocrystalline Al-7.5Mg alloy Materials Science and Engineering A. 410: 462-467. DOI: 10.1016/J.Msea.2005.08.104  0.47
2005 Wang T, Sokolinsky VS, Rajaram S, Nutt SR. Assessment of sandwich models for the prediction of sound transmission loss in unidirectional sandwich panels Applied Acoustics. 66: 245-262. DOI: 10.1016/J.Apacoust.2004.08.005  0.521
2005 Han BO, Lavernia EJ, Lee Z, Nutt S, Witkin D. Deformation behavior of bimodal nanostructured 5083 Al alloys Metallurgical and Materials Transactions A. 36: 957-965. DOI: 10.1007/S11661-005-0289-7  0.525
2005 Lu H, Shen H, Song Z, Shing KS, Tao W, Nutt S. Cover Picture: Macromol. Rapid Commun. 18/2005 Macromolecular Rapid Communications. 26: 1437-1437. DOI: 10.1002/Marc.200590037  0.411
2005 Lu H, Shen H, Song Z, Shing KS, Tao W, Nutt S. Rod-Like Silicate-Epoxy Nanocomposites Macromolecular Rapid Communications. 26: 1445-1450. DOI: 10.1002/Marc.200500360  0.541
2005 Huang YJ, Vaikhanski L, Nutt SR. 3D fiber-reinforced syntactic foams based on amino microspheres 20th Technical Conference of the American Society For Composites 2005. 1: 81-95.  0.32
2005 Lavoie JA, Shen H, Desai A, Sechrist A, Nutt SR. Tenacious composite foams as cryogenic tank insulation Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 5: 3570-3576.  0.527
2005 Bosze EJ, Alawar A, Bretschger O, Tsai YI, Nutt SR. Assessment of polymer matrices for composite cores in overhead conductors International Sampe Symposium and Exhibition (Proceedings). 50: 3121-3128.  0.793
2004 Zhang H, Guidanean K, Nutt S. Thermoplastic matrix composites for SPACE SOLAR POWER TRUSS (SSP) Mrs Proceedings. 851. DOI: 10.1557/Proc-851-Nn4.7  0.365
2004 Lee Z, Lee J, Lavernia EJ, Nutt SR. Experiment and FEM analysis of tensile behavior of bimodal nanocrystalline Al-Mg alloys Materials Research Society Symposium Proceedings. 821: 257-262. DOI: 10.1557/Proc-821-P9.11  0.469
2004 Wang T, Rajaram S, Nutt SR. Prediction of sound transmission loss of honeycomb sandwich panel by higher order approach Journal of the Acoustical Society of America. 116: 2501-2501. DOI: 10.1121/1.4808651  0.533
2004 Shen H, Sokolinsky VS, Nutt SR. Accurate predictions of bending deflections for soft-core sandwich beams subject to concentrated loads Composite Structures. 64: 115-122. DOI: 10.1016/S0263-8223(03)00219-8  0.486
2004 Lee Z, Zhou F, Valiev RZ, Lavernia EJ, Nutt SR. Microstructure and microhardness of cryomilled bulk nanocrystalline Al-7.5%Mg alloy consolidated by high pressure torsion Scripta Materialia. 51: 209-214. DOI: 10.1016/J.Scriptamat.2004.04.016  0.441
2004 Shen H, Nutt S, Hull D. Direct observation and measurement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging Composites Science and Technology. 64: 2113-2120. DOI: 10.1016/J.Compscitech.2004.03.003  0.555
2004 Zhou F, Lee Z, Lavernia EJ, Nutt SR. Bimodal microstructures in nanocrystalline Al and Al-Mg alloy powders prepared by cryogenic ball milling Materials Research Society Symposium Proceedings. 821: 83-88.  0.46
2003 Nutt SR, Shen H, Vaikhanski L. Composite Foams for Sandwich Structures Journal of the Korean Ceramic Society. 40: 625-631. DOI: 10.4191/Kcers.2003.40.7.625  0.577
2003 Lee Z, Witkin DB, Lavernia EJ, Nutt SR. Bimodal structured bulk nanocrystalline Al-7.5Mg alloy Materials Research Society Symposium - Proceedings. 791: 3-9. DOI: 10.1557/Proc-791-Q1.6  0.522
2003 Lu H, Nutt S. Restricted relaxation in polymer nanocomposites near the glass transition Macromolecules. 36: 4010-4016. DOI: 10.1021/Ma034049B  0.321
2003 Chen X, Wudl F, Mal AK, Shen H, Nutt SR. New thermally remendable highly cross-linked polymeric materials Macromolecules. 36: 1802-1807. DOI: 10.1021/Ma0210675  0.512
2003 Vaikhanski L, Nutt SR. Fiber-reinforced composite foam from expandable PVC microspheres Composites Part a: Applied Science and Manufacturing. 34: 1245-1253. DOI: 10.1016/S1359-835X(03)00255-0  0.454
2003 Shen H, Lavoie AJ, Nutt SR. Enhanced peel resistance of fiber reinforced phenolic foams Composites Part a: Applied Science and Manufacturing. 34: 941-948. DOI: 10.1016/S1359-835X(03)00210-0  0.576
2003 Vaikhanksi L, Nutt SR. Synthesis of composite foam from thermoplastic microspheres and 3D long fibers Composites Part a: Applied Science and Manufacturing. 34: 755-763. DOI: 10.1016/S1359-835X(03)00139-8  0.408
2003 Shen H, Nutt S. Mechanical characterization of short fiber reinforced phenolic foam Composites Part a: Applied Science and Manufacturing. 34: 899-906. DOI: 10.1016/S1359-835X(03)00136-2  0.582
2003 Witkin D, Lee Z, Rodriguez R, Nutt S, Lavernia E. Al–Mg alloy engineered with bimodal grain size for high strength and increased ductility Scripta Materialia. 49: 297-302. DOI: 10.1016/S1359-6462(03)00283-5  0.559
2003 Vaikhanski L, Lesko JJ, Nutt SR. Cellular polymer composites based on bi-component fibers Composites Science and Technology. 63: 1403-1410. DOI: 10.1016/S0266-3538(03)00087-3  0.39
2003 Sokolinsky VS, Shen H, Vaikhanski L, Nutt SR. Experimental and analytical study of nonlinear bending response of sandwich beams Composite Structures. 60: 219-229. DOI: 10.1016/S0263-8223(02)00293-3  0.491
2003 Han BQ, Lee Z, Nutt SR, Lavernia EJ, Mohamed FA. Mechanical properties of an ultrafine-grained Al-7.5 Pct Mg alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 34: 603-613. DOI: 10.1007/S11661-003-0095-Z  0.548
2003 Lu H, Nutt S. Enthalpy Relaxation of Layered Silicate-Epoxy Nanocomposites Macromolecular Chemistry and Physics. 204: 1832-1841. DOI: 10.1002/Macp.200350046  0.325
2002 Chen X, Dam MA, Ono K, Mal A, Shen H, Nutt SR, Sheran K, Wudl F. A thermally re-mendable cross-linked polymeric material. Science (New York, N.Y.). 295: 1698-702. PMID 11872836 DOI: 10.1126/Science.1065879  0.517
2002 Lee Z, Witkin DB, Lavernia EJ, Nutt SR. Bimodal microstructure and mechanical properties of cryomilled nanocrystalline Al-7.5Mg Materials Research Society Symposium - Proceedings. 740: 21-26. DOI: 10.1557/Proc-740-I1.7  0.522
2002 Park C, Nutt SR. Strain rate sensitivity and defects in steel foam Materials Science and Engineering A. 323: 358-366. DOI: 10.1016/S0921-5093(01)01372-7  0.312
2002 Sokolinsky VS, Frostig Y, Nutt SR. Special behavior of unidirectional sandwich panels with transversely flexible core under statical loading International Journal of Non-Linear Mechanics. 37: 869-895. DOI: 10.1016/S0020-7462(01)00103-2  0.342
2001 Park C, Nutt SR. Anisotropy and strain localization in steel foam Materials Science and Engineering A. 299: 68-74. DOI: 10.1016/S0921-5093(00)01418-0  0.318
2000 Zhou Y, Jihong LI, Nutt S, Lavernia EJ. Spray forming of ultra-fine SiC particle reinforced 5182 Al-Mg Journal of Materials Science. 35: 4015-4023. DOI: 10.1023/A:1004873918432  0.301
2000 Park C, Nutt SR. PM synthesis and properties of steel foams Materials Science and Engineering A. 288: 111-118. DOI: 10.1016/S0921-5093(00)00761-9  0.375
1997 Owen DM, Chokshi AH, Nutt SR. Nucleation and growth characteristics of cavities during the early stages of tensile creep deformation in a superplastic zirconia-20 wt% alumina composite Journal of the American Ceramic Society. 80: 2433-2436. DOI: 10.1111/J.1151-2916.1997.Tb03139.X  0.339
1997 Sun EY, Nutt SR, Brennan JJ. Fiber Coatings for SiC‐Fiber‐Reinforced BMAS Glass‐Ceramic Composites Journal of the American Ceramic Society. 80: 264-266. DOI: 10.1111/J.1151-2916.1997.Tb02823.X  0.365
1996 Sun EY, Nutt SR, Brennan JJ. High‐Temperature Tensile Behavior of a Boron Nitride‐Coated Silicon Carbide‐Fiber Glass‐Ceramic Composite Journal of the American Ceramic Society. 79: 1521-1529. DOI: 10.1111/J.1151-2916.1996.Tb08760.X  0.432
1996 Sheldon BW, Sun EY, Nutt SR, Brennan JJ. Oxidation of BN-coated SiC fibers in ceramic matrix composites Journal of the American Ceramic Society. 79: 539-543. DOI: 10.1111/J.1151-2916.1996.Tb08163.X  0.388
1996 Marston C, Gabbitas B, Adams J, Nutt S, Marshall P, Galiotis C. Failure characteristics in carbon/epoxy composite tows Composites Part a: Applied Science and Manufacturing. 27: 1183-1194. DOI: 10.1016/1359-835X(96)00076-0  0.369
1996 Sun EY, Nutt SR, Brennan JJ. High-temperature tensile behavior of a boron nitride-coated silicon carbide-fiber glass-ceramic composite Journal of the American Ceramic Society. 79: 1521-1529.  0.322
1995 Sun EY, Nutt SR, Brennan JJ. Flexural Creep of Coated SiC-Fiber-Reinforced Glass-Ceramic Composites Journal of the American Ceramic Society. 78: 1233-1239. DOI: 10.1111/J.1151-2916.1995.Tb08475.X  0.445
1995 Zeng X, Nutt SR, Lavernia EJ. Microstructural characterization of Ni3Al processed by reactive atomization and deposition Metallurgical and Materials Transactions A. 26: 817-827. DOI: 10.1007/Bf02649079  0.322
1994 Tunaboylu B, McKittrick J, Nellis WJ, Nutt SR. Dynamic Compaction of Al2O3-ZrO2 Compositions Journal of the American Ceramic Society. 77: 1605-1612. DOI: 10.1111/J.1151-2916.1994.Tb09764.X  0.347
1994 Sun EY, Nutt SR, Brennan JJ. Interfacial Microstructure and Chemistry of SiC/BN Dual-Coated Nicalon-Fiber-Reinforced Glass-Ceramic Matrix Composites Journal of the American Ceramic Society. 77: 1329-1339. DOI: 10.1111/J.1151-2916.1994.Tb05411.X  0.439
1993 Lawrynowicz D, Wolfenstine J, Nutt S, Lavernia E, Bailey D, Sickinger A. Synthesis and Properties of MoSi2/SiC Processed by Low Pressure Plasma Co-Injection and Deposition Mrs Proceedings. 322. DOI: 10.1557/Proc-322-139  0.405
1993 Nutt SR, Lipetzky P. Creep deformation of whisker-reinforced alumina Materials Science and Engineering A. 166: 199-209. DOI: 10.1016/0921-5093(93)90323-7  0.374
1993 Suzuki M, Nutt SR, Aikin RM. Creep behavior of an SiC-reinforced XDTM MoSi2 composite Materials Science and Engineering A. 162: 73-82. DOI: 10.1016/0921-5093(90)90031-W  0.406
1992 Suzuki M, Nutt SR, Aikin M. Creep Behavior of SiC-Reinforced XD TM MoSi 2 Composite Mrs Proceedings. 273: 267. DOI: 10.1557/Proc-273-267  0.37
1992 Brennan JJ, Nutt SR. SiC-Whisker-Reinforced Glass-Ceramic Composites: Interfaces and Properties Journal of the American Ceramic Society. 75: 1205-1216. DOI: 10.1111/J.1151-2916.1992.Tb05559.X  0.392
1991 Lipetzky P, Nutt SR, Koester DA, Davis RF. Atmospheric Effects on Compressive Creep of SiC-Whisker-Reinforced Alumina Journal of the American Ceramic Society. 74: 1240-1247. DOI: 10.1111/J.1151-2916.1991.Tb04092.X  0.365
1991 Povirk GL, Needleman A, Nutt SR. An analysis of the effect of residual stresses on deformation and damage mechanisms in AlSiC composites Materials Science and Engineering A. 132: 31-38. DOI: 10.1016/0921-5093(91)90358-T  0.393
1990 Povirk GL, Needleman A, Nutt SR. An analysis of residual stress formation in whisker-reinforced AlSiC composites Materials Science and Engineering A. 125: 129-140. DOI: 10.1016/0921-5093(90)90165-Y  0.393
1990 Nutt SR, Lipetzky P, Becher PF. Creep deformation of alumina-SiC composites Materials Science and Engineering A. 126: 165-172. DOI: 10.1016/0921-5093(90)90123-K  0.354
1989 Christman T, Needleman A, Nutt S, Suresh S. On microstructural evolution and micromechanical modelling of deformation of a whisker-reinforced metal-matrix composite Materials Science and Engineering A. 107: 49-61. DOI: 10.1016/0921-5093(89)90374-2  0.416
1988 Lin F, Marieb T, Morrone A, Nutt S. Thermal Oxidation of Al 2 O 3 -SiC Whisker Composites: Mechanisms and Kinetics Mrs Proceedings. 120: 323. DOI: 10.1557/Proc-120-323  0.312
1988 Lipetzky P, Nutt SR, Becher PF. Creep Behavior of an Al2O3-Sic Composite Mrs Proceedings. 120. DOI: 10.1557/Proc-120-271  0.405
1988 Povirk GL, Horton JA, McKamey CG, Tiegs TN, Nutt SR. Interfaces in nickel aluminide/alumina fibre composites Journal of Materials Science. 23: 3945-3950. DOI: 10.1007/Bf01106818  0.382
1988 Morrone AA, Nutt SR, Suresh S. Fracture toughness and fatigue crack growth behaviour of an Al2O3-SiC composite Journal of Materials Science. 23: 3206-3213. DOI: 10.1007/Bf00551296  0.317
1987 Jankowski AF, Makowiecki DM, Mckernan MA, Nutt SR, Green K. Exploring the Relation between Interface Structure & Mechanical Properties in Multilayer Materials Mrs Proceedings. 103. DOI: 10.1557/Proc-103-327  0.346
1985 Nutt SR, Wawner FE. Silicon carbide filaments: Microstructure Journal of Materials Science. 20: 1953-1960. DOI: 10.1007/Bf01112277  0.31
1984 Nutt SR. DEFECTS IN SILICON CARBIDE WHISKERS Journal of the American Ceramic Society. 67: 428-431. DOI: 10.1002/Chin.198438007  0.316
Show low-probability matches.