Year |
Citation |
Score |
2019 |
Zarour D, Thomas M, Meziani S. Diagnosis of bearing defects by variational modes decomposition from vibratory and acoustic emission measurements International Journal of Vehicle Noise and Vibration. 15: 21. DOI: 10.1504/Ijvnv.2019.10023604 |
0.371 |
|
2019 |
Benadda M, Bouzidane A, Thomas M, Guilbault R. Dynamic behavior analysis of a rigid rotor supported by hydrostatic squeeze film dampers compensated with new electrorheological valve restrictors Industrial Lubrication and Tribology. 72: 611-619. DOI: 10.1108/Ilt-06-2019-0226 |
0.354 |
|
2019 |
Proteau A, Tahan A, Thomas M. Specific cutting energy: a physical measurement for representing tool wear The International Journal of Advanced Manufacturing Technology. 103: 101-110. DOI: 10.1007/S00170-019-03533-4 |
0.377 |
|
2018 |
Aghazadeh F, Tahan A, Thomas M. Tool condition monitoring using spectral subtraction and convolutional neural networks in milling process The International Journal of Advanced Manufacturing Technology. 98: 3217-3227. DOI: 10.1007/S00170-018-2420-0 |
0.448 |
|
2017 |
Imaouchen Y, Kedadouche M, Alkama R, Thomas M. A Frequency-Weighted Energy Operator and complementary ensemble empirical mode decomposition for bearing fault detection Mechanical Systems and Signal Processing. 82: 103-116. DOI: 10.1016/J.Ymssp.2016.05.009 |
0.436 |
|
2017 |
Li W, Vu V, Liu Z, Thomas M, Hazel B. Application of adaptable functional series vector time-dependent autoregressive model for extraction of real modal parameters for identification of time-varying systems Measurement. 103: 143-156. DOI: 10.1016/J.Measurement.2017.02.027 |
0.329 |
|
2017 |
Thomas M, Malot T, Aubry P. Laser Metal Deposition of the Intermetallic TiAl Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 3143-3158. DOI: 10.1007/S11661-017-4042-9 |
0.301 |
|
2016 |
Vu VH, Liu Z, Thomas M, Li W, Hazel B. Output-only identification of modal shape coupling in a flexible robot by vector autoregressive modeling Mechanism and Machine Theory. 97: 141-154. DOI: 10.1016/J.Mechmachtheory.2015.11.005 |
0.375 |
|
2015 |
Lamraoui M, Barakat M, Thomas M, Badaoui ME. Chatter detection in milling machines by neural network classification and feature selection Jvc/Journal of Vibration and Control. 21: 1251-1266. DOI: 10.1177/1077546313493919 |
0.755 |
|
2015 |
Kedadouche M, Thomas M, Tahan A, Guilbault R. Nonlinear Parameters for Monitoring Gear: Comparison between Lempel-Ziv, Approximate Entropy, and Sample Entropy Complexity Shock and Vibration. 2015. DOI: 10.1155/2015/959380 |
0.398 |
|
2015 |
Serra R, Garibaldi L, Maia NM, Thomas M. Experimental Shock and Vibration Analysis Shock and Vibration. 2015. DOI: 10.1155/2015/796736 |
0.412 |
|
2015 |
Kedadouche M, Thomas M, Tahan A. A hybrid method combining Teager Kaiser energy operator, empirical mode decomposition and minimum entropy deconvolution for monitoring gears damages Mechanics and Industry. 16. DOI: 10.1051/Meca/2015030 |
0.429 |
|
2015 |
Imaouchen Y, Alkama R, Thomas M. Complexity based on synchrosqueezing analysis in gear diagnosis Mechanics & Industry. 16: 508. DOI: 10.1051/Meca/2015026 |
0.385 |
|
2014 |
Kedadouche M, Thomas M, Tahan A. Monitoring machines by using a hybrid method combining MED, EMD, and TKEO Advances in Acoustics and Vibration. DOI: 10.1155/2014/592080 |
0.451 |
|
2014 |
Kidar T, Thomas M, El Badaoui M, Guilbault R. Control of phases by ESPRIT and WLSE methods for the early detection of gear cracks Mechanics and Industry. 15: 487-495. DOI: 10.1051/Meca/2014062 |
0.335 |
|
2014 |
Kedadouche M, Thomas M, Tahan A. Cyclostationarity applied to acoustic emission and development of a new indicator for monitoring bearing defects Mechanics and Industry. 15: 467-476. DOI: 10.1051/Meca/2014061 |
0.391 |
|
2014 |
Adewusi S, Thomas M, Vu VH, Li W. Modal parameters of the human hand-Arm using finite element and operational modal analysis Mechanics and Industry. 15: 541-549. DOI: 10.1051/Meca/2014060 |
0.365 |
|
2014 |
Vu VH, Thomas M. Uncertainties on modal parameters by operational modal analysis Mechanics and Industry. 15: 153-158. DOI: 10.1051/Meca/2014018 |
0.427 |
|
2014 |
Vu VH, Thomas M, Lafleur F. Harmonic and modal frequency discrimination in time domain operational modal analysis Mechanics and Industry. 15: 29-37. DOI: 10.1051/Meca/2013083 |
0.741 |
|
2014 |
Kedadouche M, Thomas M, Tahan A. A comparative study between Empirical Wavelet Transforms and Empirical Mode Decomposition Methods: Application to bearing defect diagnosis Mechanical Systems and Signal Processing. DOI: 10.1016/J.Ymssp.2016.02.049 |
0.429 |
|
2014 |
Rafieian F, Girardin F, Liu Z, Thomas M, Hazel B. Angular analysis of the cyclic impacting oscillations in a robotic grinding process Mechanical Systems and Signal Processing. 44: 160-176. DOI: 10.1016/J.Ymssp.2013.05.005 |
0.363 |
|
2014 |
Lamraoui M, Thomas M, Badaoui ME, Girardin F. Indicators for monitoring chatter in milling based on instantaneous angular speeds Mechanical Systems and Signal Processing. 44: 72-85. DOI: 10.1016/J.Ymssp.2013.05.002 |
0.755 |
|
2014 |
Lamraoui M, Thomas M, Badaoui ME. Cyclostationarity approach for monitoring chatter and tool wear in high speed milling Mechanical Systems and Signal Processing. 44: 177-198. DOI: 10.1016/J.Ymssp.2013.05.001 |
0.775 |
|
2013 |
Bouzidane A, Thomas M. Nonlinear Dynamic Behavior of a Flexible Shaft Supported by Smart Hydrostatic Squeeze Film Dampers Journal of Tribology-Transactions of the Asme. 135: 31701. DOI: 10.1115/1.4023805 |
0.336 |
|
2013 |
Bouzidane A, Thomas M. Nonlinear Dynamic Analysis of a Rigid Rotor Supported by a Three-Pad Hydrostatic Squeeze Film Dampers Tribology Transactions. 56: 717-727. DOI: 10.1080/10402004.2013.788238 |
0.366 |
|
2013 |
Vu VH, Thomas M, Lafleur F, Marcouiller L. Towards an automatic spectral and modal identification from operational modal analysis Journal of Sound and Vibration. 332: 213-227. DOI: 10.1016/J.Jsv.2012.08.019 |
0.744 |
|
2013 |
Batista L, Badri B, Sabourin R, Thomas M. A classifier fusion system for bearing fault diagnosis Expert Systems With Applications. 40: 6788-6797. DOI: 10.1016/J.Eswa.2013.06.033 |
0.733 |
|
2013 |
Adewusi S, Rakheja S, Marcotte P, Thomas M. Distributed vibration power absorption of the human hand-arm system in different postures coupled with vibrating handle and power tools International Journal of Industrial Ergonomics. 43: 363-374. DOI: 10.1016/J.Ergon.2013.04.004 |
0.342 |
|
2012 |
Guilbault R, Lalonde S, Thomas M. Nonlinear damping calculation in cylindrical gear dynamic modeling Journal of Sound and Vibration. 331: 2110-2128. DOI: 10.1016/J.Jsv.2011.12.025 |
0.358 |
|
2011 |
Ayari H, Thomas M, Doré S. A design of experiments for statistically predicting risk of adverse health effects on drivers exposed to vertical vibrations. International Journal of Occupational Safety and Ergonomics : Jose. 17: 221-32. PMID 21939594 DOI: 10.1080/10803548.2011.11076888 |
0.306 |
|
2011 |
Zaghbani I, Lamraoui M, Songmene V, Thomas M, El Badaoui M. Robotic high speed machining of aluminum alloys Advanced Materials Research. 188: 584-589. DOI: 10.4028/Www.Scientific.Net/Amr.188.584 |
0.411 |
|
2011 |
Thomas M. Robustness versus performance assessment for different gamma-TiAl processing routes Materials Research Society Symposium Proceedings. 1295: 127-138. DOI: 10.1557/Opl.2011.182 |
0.312 |
|
2011 |
Sun Y, Thomas M. Control of torsional rotor vibrations using an electrorheological fluid dynamic absorber Journal of Vibration and Control. 17: 1253-1264. DOI: 10.1177/1077546309359759 |
0.37 |
|
2011 |
Vu VH, Thomas M, Lakis AA, Marcouiller L. Operational modal analysis by updating autoregressive model Mechanical Systems and Signal Processing. 25: 1028-1044. DOI: 10.1016/J.Ymssp.2010.08.014 |
0.447 |
|
2010 |
Pérez-Bravo M, Baudin T, Boivin D, Thomas M, Madariaga I, Ostolaza K, Tello M. Study of Refined Microstructures after Two-Step Heat Treatments by Means of EBSD Technique on γ-TiAl Alloys Materials Science Forum. 1416-1421. DOI: 10.4028/Www.Scientific.Net/Msf.638-642.1416 |
0.31 |
|
2009 |
Mabrouki F, Thomas M, Genest M, Fahr A. Numerical modeling of frictional heating based vibrothermography Proceedings of Spie - the International Society For Optical Engineering. 7295. DOI: 10.1117/12.815351 |
0.309 |
|
2009 |
Ayari H, Thomas M, Doré S, Serrus O. Evaluation of lumbar vertebra injury risk to the seated human body when exposed to vertical vibration Journal of Sound and Vibration. 321: 454-470. DOI: 10.1016/J.Jsv.2008.09.046 |
0.318 |
|
2008 |
Kerboua Y, Lakis AA, Thomas M, Marcouiller L. Computational modeling of coupled fluid-structure systems with applications Structural Engineering and Mechanics. 29: 91-111. DOI: 10.12989/Sem.2008.29.1.091 |
0.313 |
|
2008 |
Bouzidane A, Thomas M, Lakis AA. Nonlinear dynamic behavior of a rigid rotor supported by hydrostatic squeeze film dampers Journal of Tribology. 130. DOI: 10.1115/1.2958079 |
0.313 |
|
2008 |
Bouzidane A, Thomas M. An electrorheological hydrostatic journal bearing for controlling rotor vibration Computers & Structures. 86: 463-472. DOI: 10.1016/J.Compstruc.2007.02.006 |
0.357 |
|
2008 |
Kerboua Y, Lakis AA, Thomas M, Marcouiller L. Vibration analysis of rectangular plates coupled with fluid Applied Mathematical Modelling. 32: 2570-2586. DOI: 10.1016/J.Apm.2007.09.004 |
0.321 |
|
2007 |
Sassi S, Badri B, Thomas M. A Numerical Model to Predict Damaged Bearing Vibrations Journal of Vibration and Control. 13: 1603-1628. DOI: 10.1177/1077546307080040 |
0.716 |
|
2007 |
Bouzidane A, Thomas M. Equivalent Stiffness and Damping Investigation of a Hydrostatic Journal Bearing Tribology Transactions. 50: 257-267. DOI: 10.1080/10402000701309745 |
0.344 |
|
2007 |
Kerboua Y, Lakis AA, Thomas M, Marcouiller L. Hybrid method for vibration analysis of rectangular plates Nuclear Engineering and Design. 237: 791-801. DOI: 10.1016/J.Nucengdes.2006.09.025 |
0.319 |
|
2005 |
Sassi S, Cherif K, Mezghani L, Thomas M, Kotrane A. An innovative magnetorheological damper for automotive suspension: from design to experimental characterization Smart Materials and Structures. 14: 811-822. DOI: 10.1088/0964-1726/14/4/041 |
0.349 |
|
2004 |
Guerra M, Thomas M, St-Georges L. Turbomachinery blade modal analysis using contact elements Sae Transactions. 113: 1729-1734. DOI: 10.4271/2004-01-3141 |
0.372 |
|
2003 |
Sassi S, Cherif K, Thomas M. On the design and testing of a smart car damper based on electro-rheological technology Smart Materials and Structures. 12: 873-880. DOI: 10.1088/0964-1726/12/6/003 |
0.319 |
|
2003 |
Thomas M, Beauchamp Y. Statistical investigation of modal parameters of cutting tools in dry turning International Journal of Machine Tools & Manufacture. 43: 1093-1106. DOI: 10.1016/S0890-6955(03)00131-7 |
0.402 |
|
2001 |
SASSI S, SMAOUI H, THOMAS M, LAVILLE F. MORE DETAILS ABOUT THE INTERACTION OF FORCED AND PARAMETRIC RESONANCES ARISING FROM IN-PLANE EXCITATION OF IMPERFECT RECTANGULAR PLATES Journal of Sound and Vibration. 243: 503-524. DOI: 10.1006/Jsvi.2000.3421 |
0.375 |
|
1999 |
Smail M, Thomas M, Lakis A. Arma Models For Modal Analysis: Effect Of Model Orders And Sampling Frequency Mechanical Systems and Signal Processing. 13: 925-941. DOI: 10.1006/Mssp.1999.1235 |
0.368 |
|
1999 |
Smail M, Thomas M, Lakis AA. Assessment of optimal ARMA model orders for modal analysis Mechanical Systems and Signal Processing. 13: 803-819. DOI: 10.1006/Mssp.1999.1224 |
0.418 |
|
1997 |
Masounave J, Youssef YA, Beauchamp Y, Thomas M. An experimental design for surface roughness and built‐up edge formation in lathe dry turning International Journal of Quality Science. 2: 167-180. DOI: 10.1108/13598539710170803 |
0.361 |
|
1996 |
Sassi S, Thomas M, Laville F. DYNAMIC RESPONSE OBTAINED BY DIRECT NUMERICAL INTEGRATION FOR PRE-DEFORMED RECTANGULAR PLATES SUBJECTED TO IN-PLANE LOADING Journal of Sound and Vibration. 197: 67-83. DOI: 10.1006/Jsvi.1996.0517 |
0.373 |
|
Show low-probability matches. |