| Year |
Citation |
Score |
| 2020 |
Zinnecker V, Stokes-Griffin CM, Khudiakova A, Wolfahrt M, Compston P. A comparative study for shear testing of thermoplastic-based composites and metal-composite hybrids Composites Part a-Applied Science and Manufacturing. 137: 105953. DOI: 10.1016/J.Compositesa.2020.105953 |
0.414 |
|
| 2019 |
Stokes-Griffin C, Kollmannsberger A, Compston P, Drechsler K. Steel-CF/PA 6 hybrids manufactured by a laser tape placement process: Effect of first-ply placement rate on lap shear strength for garnet blasted substrates Procedia Manufacturing. 29: 321-328. DOI: 10.1016/J.Promfg.2019.02.144 |
0.387 |
|
| 2019 |
Zinnecker V, Stokes-Griffin C, Madden S, Rode A, Compston P. Investigation of the effects of femtosecond laser metal surface texturing on bonding of PA 6 to steel Procedia Manufacturing. 29: 313-320. DOI: 10.1016/J.Promfg.2019.02.143 |
0.317 |
|
| 2019 |
Summerville C, Compston P, Doolan M. A comparison of resistance spot weld quality assessment techniques Procedia Manufacturing. 29: 305-312. DOI: 10.1016/J.Promfg.2019.02.142 |
0.342 |
|
| 2019 |
Stokes-Griffin CM, Kollmannsberger A, Compston P, Drechsler K. The effect of processing temperature on wedge peel strength of CF/PA 6 laminates manufactured in a laser tape placement process Composites Part a-Applied Science and Manufacturing. 121: 84-91. DOI: 10.1016/J.Compositesa.2019.02.011 |
0.328 |
|
| 2018 |
Soo VK, Compston P, Doolan M. The Impact of Joining Choices on Vehicle Recycling Systems Procedia Cirp. 69: 843-848. DOI: 10.1016/J.Procir.2017.11.009 |
0.305 |
|
| 2018 |
Soo VK, Peeters J, Paraskevas D, Compston P, Doolan M, Duflou JR. Sustainable aluminium recycling of end-of-life products: A joining techniques perspective Journal of Cleaner Production. 178: 119-132. DOI: 10.1016/J.Jclepro.2017.12.235 |
0.352 |
|
| 2018 |
Stokes-Griffin CM, Kollmannsberger A, Ehard S, Compston P, Drechsler K. Manufacture of steel–CF/PA6 hybrids in a laser tape placement process: Effect of first-ply placement rate on thermal history and lap shear strength Composites Part a-Applied Science and Manufacturing. 111: 42-53. DOI: 10.1016/J.Compositesa.2018.05.007 |
0.393 |
|
| 2017 |
Soo VK, Compston P, Doolan M. The influence of joint technologies on ELV recyclability. Waste Management (New York, N.Y.). PMID 28739026 DOI: 10.1016/J.Wasman.2017.07.020 |
0.351 |
|
| 2017 |
Stokes-Griffin CM, Ehard S, Kollmannsberger A, Compston P, Drechsler K. A laser tape placement process for selective reinforcement of steel with CF/PA6 composites: Effects of surface preparation and laser angle Materials & Design. 116: 545-553. DOI: 10.1016/J.Matdes.2016.12.013 |
0.359 |
|
| 2016 |
Oromiehie E, Prusty BG, Compston P, Rajan G. In situ process monitoring for automated fibre placement using fibre Bragg grating sensors Structural Health Monitoring-An International Journal. 15: 706-714. DOI: 10.1177/1475921716658616 |
0.331 |
|
| 2016 |
Stokes-Griffin CM, Compston P. Investigation of sub-melt temperature bonding of carbon-fibre/PEEK in an automated laser tape placement process Composites Part a-Applied Science and Manufacturing. 84: 17-25. DOI: 10.1016/J.Compositesa.2015.12.019 |
0.325 |
|
| 2015 |
Stokes-Griffin CM, Compston P, Matuszyk TI, Cardew-Hall MJ. Thermal modelling of the laser-assisted thermoplastic tape placement process: Journal of Thermoplastic Composite Materials. 28: 1445-1462. DOI: 10.1177/0892705713513285 |
0.302 |
|
| 2015 |
Soo VK, Compston P, Doolan M. Interaction between New Car Design and Recycling Impact on Life Cycle Assessment Procedia Cirp. 29: 426-431. DOI: 10.1016/J.Procir.2015.02.055 |
0.315 |
|
| 2015 |
Stokes-Griffin C, Compston P. Optical characterisation and modelling for oblique near-infrared laser heating of carbon fibre reinforced thermoplastic composites Optics and Lasers in Engineering. 72: 1-11. DOI: 10.1016/J.Optlaseng.2015.03.016 |
0.326 |
|
| 2015 |
Bendemra H, Compston P, Crothers PJ. Optimisation study of tapered scarf and stepped-lap joints in composite repair patches Composite Structures. 130: 1-8. DOI: 10.1016/J.Compstruct.2015.04.016 |
0.469 |
|
| 2015 |
Stokes-Griffin C, Compston P. A combined optical-thermal model for near-infrared laser heating of thermoplastic composites in an automated tape placement process Composites Part a-Applied Science and Manufacturing. 75: 104-115. DOI: 10.1016/J.Compositesa.2014.08.006 |
0.343 |
|
| 2011 |
Pietro AD, Compston P. Shear Properties of a Glass-Fibre-Vinylester Composite Cured with High Intensity Ultraviolet Light for Use in Automated Manufacturing Processes Advanced Composites Letters. 20: 96369351102000. DOI: 10.1177/096369351102000204 |
0.365 |
|
| 2009 |
DharMalingam S, Compston P, Kalyanasundaram S. Process variables optimisation of polypropylene based fibre-metal laminates forming using finite element analysis Key Engineering Materials. 410: 263-269. DOI: 10.4028/Www.Scientific.Net/Kem.410-411.263 |
0.35 |
|
| 2009 |
Pennas D, Cantwell W, Compston P. The Influence of Loading Rate on the Mode III Fracture Properties of Adhesively Bonded Composites Journal of Reinforced Plastics and Composites. 28: 1999-2012. DOI: 10.1177/0731684408090716 |
0.363 |
|
| 2009 |
Muric-Nesic J, Compston P, Noble N, Stachurski Z. Effect of low frequency vibrations on void content in composite materials Composites Part a-Applied Science and Manufacturing. 40: 548-551. DOI: 10.1016/J.Compositesa.2008.11.010 |
0.352 |
|
| 2009 |
Pietro AD, Compston P. Resin hardness and interlaminar shear strength of a glass-fibre/vinylester composite cured with high intensity ultraviolet (UV) light Journal of Materials Science. 44: 4188-4190. DOI: 10.1007/S10853-009-3544-2 |
0.366 |
|
| 2008 |
Muric-Nesic J, Stachurski Z, Compston P, Noble N. Effect of Vibrations on Void Content in Composite Materials Advanced Materials Research. 32: 145-148. DOI: 10.4028/Www.Scientific.Net/Amr.32.145 |
0.343 |
|
| 2008 |
Styles M, Compston P, Kalyanasundaram S. Finite element modelling of core thickness effects in aluminium foam/composite sandwich structures under flexural loading Composite Structures. 86: 227-232. DOI: 10.1016/J.Compstruct.2008.03.024 |
0.309 |
|
| 2008 |
Compston P, Schiemer J, Cvetanovska A. Mechanical properties and styrene emission levels of a UV-cured glass-fibre/vinylester composite Composite Structures. 86: 22-26. DOI: 10.1016/J.Compstruct.2008.03.012 |
0.401 |
|
| 2008 |
Compston P, Dexter D. The effect of ultraviolet (UV) light postcuring on resin hardness and interlaminar shear strength of a glass-fibre/vinylester composite Journal of Materials Science. 43: 5017-5019. DOI: 10.1007/S10853-008-2701-3 |
0.378 |
|
| 2007 |
Pennas D, Cantwell WJ, Compston P. The Influence of Strain Rate on the Mode III Interlaminar Fracture of Composite Materials Journal of Composite Materials. 41: 2595-2614. DOI: 10.1177/0021998307078690 |
0.357 |
|
| 2007 |
Styles M, Compston P, Kalyanasundaram S. The effect of core thickness on the flexural behaviour of aluminium foam sandwich structures Composite Structures. 80: 532-538. DOI: 10.1016/J.Compstruct.2006.07.002 |
0.317 |
|
| 2006 |
Compston P, Styles M, Kalyanasundaram S. Low energy impact damage modes in aluminum foam and polymer foam sandwich structures Journal of Sandwich Structures and Materials. 8: 365-379. DOI: 10.1177/1099636206064824 |
0.331 |
|
| 2006 |
Mosse L, Compston P, Cantwell WJ, Cardew-Hall M, Kalyanasundaram S. Stamp forming of polypropylene based fibre-metal laminates: The effect of process variables on formability Journal of Materials Processing Technology. 172: 163-168. DOI: 10.1016/J.Jmatprotec.2005.09.002 |
0.346 |
|
| 2006 |
Gresham J, Cantwell W, Cardew-Hall MJ, Compston P, Kalyanasundaram S. Drawing behaviour of metal-composite sandwich structures Composite Structures. 75: 305-312. DOI: 10.1016/J.Compstruct.2006.04.010 |
0.37 |
|
| 2006 |
Mosse L, Compston P, Cantwell WJ, Cardew-Hall M, Kalyanasundaram S. The development of a finite element model for simulating the stamp forming of fibre-metal laminates Composite Structures. 75: 298-304. DOI: 10.1016/J.Compstruct.2006.04.009 |
0.37 |
|
| 2005 |
Mosse L, Cantwell WJ, Cardew-Hall M, Compston P, Kalyanasundaram S. A Study of the Effect of Process Variables on the Stamp Forming of Rectangular Cups Using Fibre-Metal Laminate Systems Advanced Materials Research. 649-656. DOI: 10.4028/Www.Scientific.Net/Amr.6-8.649 |
0.319 |
|
| 2005 |
Mosse L, Compston P, Cantwell WJ, Cardew-Hall M, Kalyanasundaram S. The effect of process temperature on the formability of polypropylene based fibre-metal laminates Composites Part a: Applied Science and Manufacturing. 36: 1158-1166. DOI: 10.1016/J.Compositesa.2005.01.009 |
0.328 |
|
| 2004 |
Burns MJ, Compston P. Interfacial fracture toughness of polyester-based fiber-metal laminates with primary contact and secondary adhesive bonding Journal of Materials Science. 39: 2855-2859. DOI: 10.1023/B:Jmsc.0000021464.13845.79 |
0.345 |
|
| 2002 |
Compston P, Jar PY, Burchill PJ, Takahashi K. The Transfer of Matrix Toughness to Composite Mode I Interlaminar Fracture Toughness in Glass-Fibre/vinyl Ester Composites Applied Composite Materials. DOI: 10.1023/A:1019658627639 |
0.376 |
|
| 2002 |
Pantano V, Compston P, Stachurski Z, Jar P. Effect of matrix toughness on the shear strength of brittle and rubber-modified glass-fiber/vinyl ester composites Journal of Materials Science Letters. 21: 771-773. DOI: 10.1023/A:1015797608670 |
0.402 |
|
| 2001 |
Compston P, Cantwell WJ. The interfacial fracture toughness of a polyamide-based fiber-metal laminate bonded with an ionomer resin Journal of Materials Science Letters. 20: 509-512. DOI: 10.1023/A:1010964113688 |
0.304 |
|
| 2001 |
Tucker R, Compston P, Jar P. The effect of post-cure duration on the mode I interlaminar fracture toughness of glass-fibre reinforced vinylester Composites Part a-Applied Science and Manufacturing. 32: 129-134. DOI: 10.1016/S1359-835X(00)00116-0 |
0.352 |
|
| 2001 |
Compston P, Jar PY, Burchill PJ, Takahashi K. The effect of matrix toughness and loading rate on the mode II interlaminar fracture toughness of glass-fibre/vinyl ester composites Composites Science and Technology. 61: 321-333. DOI: 10.1016/S0266-3538(00)00226-8 |
0.383 |
|
| 2000 |
Cantwell WJ, Compston P, Reyes G. Fracture properties of novel aluminum foam sandwich structures Journal of Materials Science Letters. 19: 2205-2208. DOI: 10.1023/A:1006700218661 |
0.317 |
|
| 1999 |
Compston P, Jar P-B. The Influence of Fibre Volume Fraction on the Mode I Interlaminar Fracture Toughness of a Glass-Fibre/Vinyl Ester Composite Applied Composite Materials. 6: 353-368. DOI: 10.1023/A:1008973211347 |
0.307 |
|
| 1998 |
Compston P, Jar P-B. Comparison of Interlaminar Fracture Toughness in Unidirectional and Woven Roving Marine Composites Applied Composite Materials. 5: 189-206. DOI: 10.1023/A:1008899628807 |
0.329 |
|
| 1998 |
Compston P, Jar P-B, Davies P. Matrix effect on the static and dynamic interlaminar fracture toughness of glass-fibre marine composites Composites Part B-Engineering. 29: 505-516. DOI: 10.1016/S1359-8368(98)00004-3 |
0.347 |
|
| Low-probability matches (unlikely to be authored by this person) |
| 2018 |
Oromiehie E, Prusty BG, Compston P, Rajan G. Characterization of process-induced defects in automated fiber placement manufacturing of composites using fiber Bragg grating sensors Structural Health Monitoring-An International Journal. 17: 108-117. DOI: 10.1177/1475921716685935 |
0.3 |
|
| 2011 |
Muric-Nesic J, Compston P, Stachurski Z. On the void reduction mechanisms in vibration assisted consolidation of fibre reinforced polymer composites Composites Part a-Applied Science and Manufacturing. 42: 320-327. DOI: 10.1016/J.Compositesa.2010.12.011 |
0.3 |
|
| 2015 |
Stokes-Griffin C, Compston P. The effect of processing temperature and placement rate on the short beam strength of carbon fibre-PEEK manufactured using a laser tape placement process Composites Part a-Applied Science and Manufacturing. 78: 274-283. DOI: 10.1016/J.Compositesa.2015.08.008 |
0.298 |
|
| 2016 |
Soo VK, Compston P, Doolan M. Is the Australian Automotive Recycling Industry Heading towards a Global Circular Economy? – A Case Study on Vehicle Doors Procedia Cirp. 48: 10-15. DOI: 10.1016/J.Procir.2016.03.099 |
0.298 |
|
| 2004 |
Cvetanovska A, Compston P. Degree of cure and tensile properties of vinylester resin cured with ultraviolet light Journal of Materials Science. 39: 1791-1793. DOI: 10.1023/B:Jmsc.0000016186.59458.A1 |
0.298 |
|
| 2000 |
Compston P, Jar P-B, Takahashi K. The use of crack opening displacement rate to assess matrix-to-composite mode I toughness transfer Journal of Materials Science Letters. 19: 17-19. DOI: 10.1023/A:1006783227431 |
0.297 |
|
| 2002 |
Compston P, Cantwell WJ, Jones N. Influence of loading rate on the interfacial fracture toughness of a polyamide-based fiber-metal laminate Journal of Materials Science Letters. 21: 263-266. DOI: 10.1023/A:1014955101128 |
0.296 |
|
| 2017 |
Soo VK, Peeters J, Compston P, Doolan M, Duflou JR. Comparative Study of End-of-Life Vehicle Recycling in Australia and Belgium Procedia Cirp. 61: 269-274. DOI: 10.1016/J.Procir.2016.11.222 |
0.294 |
|
| 2009 |
Puri P, Compston P, Pantano V. Life cycle assessment of Australian automotive door skins International Journal of Life Cycle Assessment. 14: 420-428. DOI: 10.1007/S11367-009-0103-7 |
0.294 |
|
| 2020 |
He D, Soo VK, Kim HC, Compston P, Doolan M. Comparative life cycle energy analysis of carbon fibre pre-processing, processing and post-processing recycling methods Resources Conservation and Recycling. 158: 104794. DOI: 10.1016/J.Resconrec.2020.104794 |
0.286 |
|
| 2016 |
Stokes-Griffin C, Compston P. An inverse model for optimisation of laser heat flux distributions in an automated laser tape placement process for carbon-fibre/PEEK Composites Part a-Applied Science and Manufacturing. 88: 190-197. DOI: 10.1016/J.Compositesa.2016.05.034 |
0.284 |
|
| 2001 |
Compston P, Cantwell WJ, Jones C, Jones N. Impact perforation resistance and fracture mechanisms of a thermoplastic based fiber-metal laminate Journal of Materials Science Letters. 20: 597-599. DOI: 10.1023/A:1010904930497 |
0.282 |
|
| 2012 |
Stasinopoulos P, Compston P, Newell B, Jones HM. A system dynamics approach in LCA to account for temporal effects-a consequential energy LCI of car body-in-whites International Journal of Life Cycle Assessment. 17: 199-207. DOI: 10.1007/S11367-011-0344-0 |
0.28 |
|
| 2017 |
Summerville C, Adams D, Compston P, Doolan M. Nugget Diameter in Resistance Spot Welding: A Comparison between a Dynamic Resistance Based Approach and Ultrasound C-scan ☆ Procedia Engineering. 183: 257-263. DOI: 10.1016/J.Proeng.2017.04.033 |
0.279 |
|
| 2002 |
Cantwell WJ, Jones N, Wade GA, Reyes G, Guillen JF, Compston P. The Impact Response Of Novel Fibre Metal Laminates Wit Transactions On the Built Environment. 59: 33-45. DOI: 10.2495/Hps020041 |
0.273 |
|
| 2019 |
Soo VK, Compston P, Doolan M. Life Cycle Modelling of End-of-Life Products: Challenges and Opportunities towards a Circular Economy Procedia Cirp. 80: 607-612. DOI: 10.1016/J.Procir.2019.01.092 |
0.268 |
|
| 2004 |
Compston P, Cantwell WJ, Cardew-Hall MJ, Kalyanasundaram S, Mosse L. Comparison of surface strain for stamp formed aluminum and an aluminum-polypropylene laminate Journal of Materials Science. 39: 6087-6088. DOI: 10.1023/B:Jmsc.0000041707.68685.72 |
0.266 |
|
| 2020 |
He D, Soo VK, Stojcevski F, Lipiński W, Henderson LC, Compston P, Doolan M. The effect of sizing and surface oxidation on the surface properties and tensile behaviour of recycled carbon fibre: an end-of-life perspective Composites Part a-Applied Science and Manufacturing. 138: 106072. DOI: 10.1016/J.Compositesa.2020.106072 |
0.265 |
|
| 2020 |
Fernando C, Soo VK, Compston P, Kim HC, Kleine RD, Weigl D, Keith DR, Doolan M. Life cycle environmental assessment of a transition to mobility servitization Procedia Cirp. 90: 238-243. DOI: 10.1016/J.Procir.2020.01.098 |
0.263 |
|
| 2007 |
Kalyanasundaram S, Compston P, Gresham J. A Methodology for Real Time Surface Strain Measurement for Stamping Through Non-Contact Optical Strain Measurement System Key Engineering Materials. 344: 855-861. DOI: 10.4028/Www.Scientific.Net/Kem.344.855 |
0.246 |
|
| 2019 |
Soo VK, Peeters JR, Compston P, Doolan M, Duflou JR. Economic and Environmental Evaluation of Aluminium Recycling based on a Belgian Case Study Procedia Manufacturing. 33: 639-646. DOI: 10.1016/J.Promfg.2019.04.080 |
0.239 |
|
| 2012 |
Stasinopoulos P, Compston P, Newell B, Jones HM. Erratum to: A system dynamics approach in LCA to account for temporal effects—a consequential energy LCI of car bodies-in-white International Journal of Life Cycle Assessment. 17: 265-265. DOI: 10.1007/S11367-011-0361-Z |
0.231 |
|
| 2016 |
Smith J, Compston P, Male S, Baillie C, Turner J. Intensive Mode Teaching of a Humanitarian Engineering Course to Enhance Service-Learning International Journal For Service Learning in Engineering, Humanitarian Engineering and Social Entrepreneurship. 11: 38-54. DOI: 10.24908/Ijsle.V11I2.6394 |
0.22 |
|
| 2010 |
Compston P. Whole system design: an integrated approach to sustainable engineering by P. Stasinopoulos, M.H. Smith, K. Hargroves, C. Desha, Earthscan, UK 2009 Journal of Cleaner Production. 18: 695. DOI: 10.1016/J.Jclepro.2009.09.019 |
0.218 |
|
| 2018 |
Smith J, Mazzurco A, Compston P. Student engagement with a humanitarian engineering pathway Australasian. Journal of Engineering Education. 23: 40-50. DOI: 10.1080/22054952.2018.1533396 |
0.199 |
|
| 2020 |
Smith J, Tran ALH, Compston P. Review of humanitarian action and development engineering education programmes European Journal of Engineering Education. 45: 249-272. DOI: 10.1080/03043797.2019.1623179 |
0.196 |
|
| 2012 |
Compston P, Grieve L. Science in brief: clinical news from the 57th convention of the American Association of Equine Practitioners, 2011. Equine Veterinary Journal. 44: 251-253. PMID 22432501 DOI: 10.1111/J.2042-3306.2012.00550.X |
0.161 |
|
| 2016 |
Shah SZA, Khan S, Compston P, Upjohn M, Jobling R. Gastrointestinal parasite infestation and the efficacy of Fenbendazole and Ivermectin in working equids in selected areas of Pakistan Journal of Equine Veterinary Science. 39. DOI: 10.1016/J.Jevs.2016.02.217 |
0.158 |
|
| Hide low-probability matches. |