Year |
Citation |
Score |
2020 |
Choi H, Jung S, Zhang C, Yun GJ. A three-dimensional stochastic progressive damage simulation model for polymer matrix-based laminate composites Mechanics of Advanced Materials and Structures. 1-18. DOI: 10.1080/15376494.2020.1785597 |
0.334 |
|
2020 |
Lim HJ, Choi H, Zhu F, Kerekes TW, Yun GJ. Multiscale damage plasticity modeling and inverse characterization for particulate composites Mechanics of Materials. 149: 103564. DOI: 10.1016/J.Mechmat.2020.103564 |
0.411 |
|
2020 |
Kim S, Yun GJ. Microstructure topology optimization by targeting prescribed nonlinear stress-strain relationships International Journal of Plasticity. 128: 102684. DOI: 10.1016/J.Ijplas.2020.102684 |
0.376 |
|
2020 |
Lim H, Choi H, Lee MJ, Yun GJ. Elasto-plastic damage modeling and characterization of 3D needle-punched Cf/SiCm composite materials Ceramics International. 46: 16918-16931. DOI: 10.1016/J.Ceramint.2020.03.271 |
0.4 |
|
2020 |
Lee K, Yun GJ. A novel heat source model for analysis of melt Pool evolution in selective laser melting process Additive Manufacturing. 36: 101497. DOI: 10.1016/J.Addma.2020.101497 |
0.316 |
|
2019 |
You H, Kim S, Joe WY, Yun GJ. New Concept for Aircraft Morphing Wing Skin: Design, Modeling, and Analysis Aiaa Journal. 57: 1786-1792. DOI: 10.2514/1.J058102 |
0.335 |
|
2019 |
Zhu F, Park C, Yun GJ. An extended Mori-Tanaka micromechanics model for wavy CNT nanocomposites with interface damage Mechanics of Advanced Materials and Structures. 1-13. DOI: 10.1080/15376494.2018.1562135 |
0.349 |
|
2019 |
Jung J, Park C, Yun GJ. Free radical polymerization simulation and molecular entanglement effect on large deformation behavior European Polymer Journal. 114: 223-233. DOI: 10.1016/J.Eurpolymj.2019.02.042 |
0.316 |
|
2019 |
Jeong S, Zhu F, Lim H, Kim Y, Yun GJ. 3D stochastic computational homogenization model for carbon fiber reinforced CNT/epoxy composites with spatially random properties Composite Structures. 207: 858-870. DOI: 10.1016/J.Compstruct.2018.09.025 |
0.371 |
|
2019 |
Choi H, Zhu F, Lim H, Yun GJ. Multiscale stochastic computational homogenization of the thermomechanical properties of woven Cf/SiCm composites Composites Part B-Engineering. 177: 107375. DOI: 10.1016/J.Compositesb.2019.107375 |
0.354 |
|
2019 |
Kerekes TW, Lim H, Joe WY, Yun GJ. Characterization of process–deformation/damage property relationship of fused deposition modeling (FDM) 3D-printed specimens Additive Manufacturing. 25: 532-544. DOI: 10.1016/J.Addma.2018.11.008 |
0.35 |
|
2018 |
Zhao L, Yun GJ. Probabilistic service life of reinforced concrete structures with randomly distributed corrosion-induced cracks Structure and Infrastructure Engineering. 14: 1-15. DOI: 10.1080/15732479.2017.1353526 |
0.34 |
|
2018 |
Zhu F, Jeong S, Lim HJ, Yun GJ. Probabilistic multiscale modeling of 3D randomly oriented and aligned wavy CNT nanocomposites and RVE size determination Composite Structures. 195: 265-275. DOI: 10.1016/J.Compstruct.2018.04.060 |
0.358 |
|
2018 |
Zhao Z, Dang H, Zhang C, Yun GJ, Li Y. A multi-scale modeling framework for impact damage simulation of triaxially braided composites Composites Part a-Applied Science and Manufacturing. 110: 113-125. DOI: 10.1016/J.Compositesa.2018.04.020 |
0.417 |
|
2016 |
Azad AI, Rahimi MR, Yun GJ. Quantitative full-field strain measurements by SAOED (SrAl2O4:Eu2+,Dy3+) mechanoluminescent materials Smart Materials and Structures. 25. DOI: 10.1088/0964-1726/25/9/095032 |
0.308 |
|
2016 |
Jiang Y, Tao J, Zhang Y, Yun G. Fatigue life prediction model for accelerated testing of electronic components under non-Gaussian random vibration excitations Microelectronics Reliability. 64: 120-124. DOI: 10.1016/J.Microrel.2016.07.018 |
0.327 |
|
2015 |
Jiang Y, Yun GJ, Zhao L, Tao J. Experimental Design and Validation of an Accelerated Random Vibration Fatigue Testing Methodology Shock and Vibration. 2015. DOI: 10.1155/2015/147871 |
0.335 |
|
2015 |
Gandomi AH, Yun GJ. Coupled SelfSim and genetic programming for non-linear material constitutive modelling Inverse Problems in Science and Engineering. 23: 1101-1119. DOI: 10.1080/17415977.2014.968149 |
0.382 |
|
2015 |
Yun GJ, Zhao L, Iarve E. Probabilistic mesh-independent discrete damage analyses of laminate composites Composite Structures. 133: 22-30. DOI: 10.1016/J.Compstruct.2015.07.083 |
0.38 |
|
2014 |
Lee SG, Yun GJ, Shang S. Reference-free damage detection for truss bridge structures by continuous relative wavelet entropy method Structural Health Monitoring. 13: 307-320. DOI: 10.1177/1475921714522845 |
0.368 |
|
2014 |
Lee SG, Yun GJ, Rahimi MR, Shang S. Experimental validation of multistep quantitative crack damage assessment for truss structures by finite element model updating Smart Materials and Structures. 23. DOI: 10.1088/0964-1726/23/12/125034 |
0.348 |
|
2014 |
Rahimi MR, Yun GJ, Shang S. Inverse estimations of dynamic stiffness of highway bridge embankment from earthquake records Journal of Bridge Engineering. 19. DOI: 10.1061/(Asce)Be.1943-5592.0000463 |
0.357 |
|
2014 |
Rahimi MR, Yun GJ, Choi JS. A predictive mechanoluminescence transduction model for thin-film SrAl 2O4:Eu2+, Dy3+ (SAOED) stress sensor Acta Materialia. 77: 200-211. DOI: 10.1016/J.Actamat.2014.06.002 |
0.312 |
|
2014 |
Talatahari S, Gandomi AH, Yun GJ. Optimum design of tower structures using Firefly Algorithm Structural Design of Tall and Special Buildings. 23: 350-361. DOI: 10.1002/Tal.1043 |
0.314 |
|
2013 |
Gandomi AH, Yun GJ, Alavi AH. An evolutionary approach for modeling of shear strength of RC deep beams Materials and Structures/Materiaux Et Constructions. 46: 2109-2119. DOI: 10.1617/S11527-013-0039-Z |
0.401 |
|
2013 |
Lee SG, Yun GJ. A statistical reference-free damage identification for real-time monitoring of truss bridges using wavelet-based log likelihood ratios Smart Structures and Systems. 12: 181-207. DOI: 10.12989/Sss.2013.12.2.181 |
0.359 |
|
2013 |
Shang S, Yun GJ, Kunchum S, Carletta J. Identification of isotropic and orthotropic constitutive parameters by FEA-free energy-based inverse characterization method Structural Engineering and Mechanics. 45: 471-494. DOI: 10.12989/Sem.2013.45.4.471 |
0.365 |
|
2013 |
Shang S, Yun GJ, Kim BR, Lee HK. Parameter estimation of a rate-dependent damage constitutive model for damage-tolerant brittle composites by Self-OPTIM analyses International Journal of Damage Mechanics. 22: 699-718. DOI: 10.1177/1056789512464634 |
0.377 |
|
2013 |
Yun GJ, Rahimi MR, Gandomi AH, Lim GC, Choi JS. Stress sensing performance using mechanoluminescence of SrAl 2O4:Eu (SAOE) and SrAl2O4:Eu, Dy (SAOED) under mechanical loadings Smart Materials and Structures. 22. DOI: 10.1088/0964-1726/22/5/055006 |
0.3 |
|
2013 |
Shang S, Yun GJ. Stochastic finite element with material uncertainties: Implementation in a general purpose simulation program Finite Elements in Analysis and Design. 64: 65-78. DOI: 10.1016/J.Finel.2012.10.001 |
0.346 |
|
2012 |
Shang S, Yun GJ. Identification of elasto-plastic constitutive parameters by self-optimizing inverse method: Experimental verifications Computers, Materials and Continua. 27: 55-72. DOI: 10.3970/Cmc.2012.027.055 |
0.369 |
|
2012 |
Yun GJ. Detection and quantification of structural damage under ambient vibration environment Structural Engineering and Mechanics. 42: 425-448. DOI: 10.12989/Sem.2012.42.3.425 |
0.373 |
|
2012 |
Yun GJ, Saleeb A, Shang S, Binienda W, Menzemer C. Improved SelfSim for inverse extraction of nonuniform, nonlinear, and inelastic material behavior under cyclic loadings Journal of Aerospace Engineering. 25: 256-272. DOI: 10.1061/(Asce)As.1943-5525.0000114 |
0.399 |
|
2012 |
Yun GJ, Abdullah ABM, Binienda W. Development of a Closed-Loop High-Cycle Resonant Fatigue Testing System Experimental Mechanics. 52: 275-288. DOI: 10.1007/S11340-011-9486-Z |
0.316 |
|
2011 |
Chorzepa M, Kim YJ, Yun GJ, Harmon TG, Dyke S. Cyclic shear-friction constitutive model for finite element analysis of reinforced concrete membrane elements Aci Structural Journal. 108: 324-331. DOI: 10.14359/51682348 |
0.311 |
|
2011 |
Gandomi AH, Alavi AH, Yun GJ. Nonlinear modeling of shear strength of SFRC beams using linear genetic programming Structural Engineering and Mechanics. 38: 1-25. DOI: 10.12989/Sem.2011.38.1.001 |
0.401 |
|
2011 |
Caicedo JM, Yun GJ. A novel evolutionary algorithm for identifying multiple alternative solutions in model updating Structural Health Monitoring. 10: 491-501. DOI: 10.1177/1475921710381775 |
0.377 |
|
2011 |
Yun GJ, Nizamiev K, Hariharan SI. Stochastic Galerkin model updating of randomly distributed parameters Proceedings of Spie - the International Society For Optical Engineering. 7981. DOI: 10.1117/12.882423 |
0.399 |
|
2011 |
Lee SG, Yun GJ. Real-time health monitoring of bridge structures using a reference-free damage detection algorithm Proceedings of Spie - the International Society For Optical Engineering. 7981. DOI: 10.1117/12.882097 |
0.332 |
|
2011 |
Yun GJ, Shang S. A self-optimizing inverse analysis method for estimation of cyclic elasto-plasticity model parameters International Journal of Plasticity. 27: 576-595. DOI: 10.1016/J.Ijplas.2010.08.003 |
0.392 |
|
2011 |
Yun GJ, Lee SG, Carletta J, Nagayama T. Decentralized damage identification using wavelet signal analysis embedded on wireless smart sensors Engineering Structures. 33: 2162-2172. DOI: 10.1016/J.Engstruct.2011.03.007 |
0.326 |
|
2011 |
Gandomi AH, Alavi AH, Yun GJ. Formulation of uplift capacity of suction caissons using multi expression programming Ksce Journal of Civil Engineering. 15: 363-373. DOI: 10.1007/S12205-011-1117-9 |
0.342 |
|
2010 |
Hiatt M, Mathiasson A, Okwori J, Jin SS, Shang S, Yun GJ, Caicedo J, Christenson R, Yun CB, Sohn H. Finite Element Model Updating of a PSC Box Girder Bridge Using Ambient Vibration Test Advanced Materials Research. 2263-2270. DOI: 10.4028/Www.Scientific.Net/Amr.168-170.2263 |
0.382 |
|
2010 |
Yun GJ, Shang S, Kunchum S, Carletta J, Nam SB. A low-cost digital image correlation based constitutive sensor Proceedings of Spie - the International Society For Optical Engineering. 7648. DOI: 10.1117/12.848184 |
0.322 |
|
2010 |
Shang S, Yun GJ, Qiao P. Delamination identification of laminated composite plates using a continuum damage mechanics model and subset selection technique Smart Materials and Structures. 19. DOI: 10.1088/0964-1726/19/5/055024 |
0.426 |
|
2010 |
Yun GJ, Ogorzalek KA, Dyke SJ, Song W. A parameter subset selection method using residual force vector for detecting multiple damage locations Structural Control and Health Monitoring. 17: 48-67. DOI: 10.1002/Stc.284 |
0.368 |
|
2010 |
Shang S, Yun GJ, Lee SG, Caicedo J, Narasimhan S. Development of a benchmark laboratory structure for finite-element model updating Bridge Maintenance, Safety, Management and Life-Cycle Optimization - Proceedings of the 5th International Conference On Bridge Maintenance, Safety and Management. 285-291. |
0.303 |
|
2009 |
So M, Harmon TG, Yun GJ, Dyke S. Inclusion of smeared cyclic bond-slip behavior in two-dimensional membrane elements Aci Structural Journal. 106: 466-475. DOI: 10.14359/56612 |
0.393 |
|
2009 |
Yun GJ, Ogorzalek KA, Dyke SJ, Song W. A two-stage damage detection approach based on subset selection and genetic algorithms Smart Structures and Systems. 5: 1-21. DOI: 10.12989/Sss.2009.5.1.001 |
0.364 |
|
2009 |
Yun GJ, Shang S, Qiao P. Fast inverse identification of delamination of E-glass/epoxy laminated composite panels Proceedings of Spie - the International Society For Optical Engineering. 7294. DOI: 10.1117/12.821525 |
0.404 |
|
2009 |
Yun GJ, Lee SG, Carletta J, Nagayama T. Wavelet entropy based damage identification using wireless smart sensors Proceedings of Spie - the International Society For Optical Engineering. 7292. DOI: 10.1117/12.819987 |
0.303 |
|
2009 |
Song W, Dyke S, Yun GJ, Harmon T. Improved damage localization and quantification using subset selection Journal of Engineering Mechanics. 135: 548-560. DOI: 10.1061/(Asce)Em.1943-7889.0000005 |
0.387 |
|
2008 |
Yun GJ, Harmon TG, Dyke SJ, So M. A total strain-based hysteretic material model for reinforced concrete structures: Theory and verifications Computers and Concrete. 5: 217-241. DOI: 10.12989/Cac.2008.5.3.217 |
0.461 |
|
2008 |
Yun GJ, Ghaboussi J, Elnashai AS. Self-learning simulation method for inverse nonlinear modeling of cyclic behavior of connections Computer Methods in Applied Mechanics and Engineering. 197: 2836-2857. DOI: 10.1016/J.Cma.2008.01.021 |
0.586 |
|
2008 |
Yun GJ, Ghaboussi J, Elnashai AS. A new neural network-based model for hysteretic behavior of materials International Journal For Numerical Methods in Engineering. 73: 447-469. DOI: 10.1002/Nme.2082 |
0.592 |
|
2008 |
Yun GJ, Ghaboussi J, Elnashai AS. A design-variable-based inelastic hysteretic model for beam-column connections Earthquake Engineering and Structural Dynamics. 37: 535-555. DOI: 10.1002/Eqe.771 |
0.585 |
|
2008 |
Song W, So M, Dyke SJ, Harmon TG, Yun GJ. Nonlinear rc structure model updating using ambient vibration data American Concrete Institute, Aci Special Publication. 99-124. |
0.32 |
|
2007 |
Yun GJ, Ghaboussi J, Elnashai AS. Development of neural network based hysteretic models for steel beam-column connections through self-learning simulation Journal of Earthquake Engineering. 11: 453-467. DOI: 10.1080/13632460601123180 |
0.598 |
|
2006 |
Ghaboussi J, Yun GJ, Hashash YMA. A novel predictor-corrector algorithm for sub-structure pseudo-dynamic testing Earthquake Engineering and Structural Dynamics. 35: 453-476. DOI: 10.1002/Eqe.540 |
0.338 |
|
2006 |
Yun GJ, Ghaboussi J, Elnashai AS. Neural network based hysteretic model for steel beam-column connection: Component-based approach Proceedings of the 5th International Conference On Behaviour of Steel Structures in Seismic Areas - Stessa 2006. 377-382. |
0.551 |
|
Show low-probability matches. |