Year |
Citation |
Score |
2021 |
Lin J, Li J, Liu T, Zhu L, Chu X, Zhao G, Guan Y. Evaluation of friction reduction and frictionless stress in ultrasonic vibration forming process Journal of Materials Processing Technology. 288: 116881. DOI: 10.1016/J.Jmatprotec.2020.116881 |
0.314 |
|
2020 |
Zheng C, Tian Z, Zhao X, Tan Y, Zhang G, Zhao G, Ji Z. Effect of pulsed laser parameters on deformation inhomogeneity in laser shock incremental forming of pure copper foil Optics and Laser Technology. 127: 106205. DOI: 10.1016/J.Optlastec.2020.106205 |
0.31 |
|
2020 |
Zhang S, Chen L, Li Z, Zhao G, Zhang C. Investigation on microstructure and mechanical properties of in-situ TiB2/Al–Cu–Mg composite profile fabricated by porthole die extrusion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 786: 139449. DOI: 10.1016/J.Msea.2020.139449 |
0.34 |
|
2020 |
Tang J, Chen L, Zhao G, Zhang C, Chu X. Formation mechanism of abnormal coarse grains on weld seam of extruded ZK60 alloy and the effects on mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 773: 138718. DOI: 10.1016/J.Msea.2019.138718 |
0.333 |
|
2020 |
Shi Z, Ma X, Zhao G, Wang G, Zhang L, Li B. Fabrication of high porosity Nanocellular polymer foams based on PMMA/PVDF blends Materials & Design. 195: 109002. DOI: 10.1016/J.Matdes.2020.109002 |
0.376 |
|
2020 |
Chen X, Ma X, Xi H, Zhao G, Wang Y, Xu X. Effects of heat treatment on the microstructure and mechanical properties of extruded 2196 Al-Cu-Li alloy Materials & Design. 192: 108746. DOI: 10.1016/J.Matdes.2020.108746 |
0.339 |
|
2020 |
Liu M, Zhang C, He H, Zhao G, Chen L, Ma X. Interface microstructure evolution and mechanical properties of the extruded fiber-reinforced aluminum-based composite bar Materials & Design. 188: 108446. DOI: 10.1016/J.Matdes.2019.108446 |
0.371 |
|
2020 |
Mu Y, Hang L, Zhao G, Wang X, Zhou Y, Cheng Z. Modeling and simulation for the investigation of polymer film casting process using finite element method Mathematics and Computers in Simulation. 169: 88-102. DOI: 10.1016/J.Matcom.2019.09.012 |
0.337 |
|
2020 |
Hu F, Zhang W, Xue Y, Lin K, Lu B, Xu J, Zhao G. Tuning optoelectronic performances for 3-methylselenophene-EDOT hybrid polymer Materials Chemistry and Physics. 244: 122699. DOI: 10.1016/J.Matchemphys.2020.122699 |
0.626 |
|
2020 |
Zhang C, Guo R, Liu M, Zhang Z, Chen L, Zhao G. Influence of isothermal and non-isothermal aging treatments on microstructure and properties of Al-Zn-Mg alloy helical profile Materials Characterization. 110613. DOI: 10.1016/J.Matchar.2020.110613 |
0.344 |
|
2020 |
Xu X, Ma X, Yu S, Zhao G, Wang Y, Chen X. Bonding mechanism and mechanical properties of 2196 Al-Cu-Li alloy joined by hot compression deformation Materials Characterization. 167: 110486. DOI: 10.1016/J.Matchar.2020.110486 |
0.347 |
|
2020 |
Li Z, Chen L, Tang J, Zhao G, Zhang C, Chu X. Microstructure evolution, plastic anisotropy, and intergranular corrosion of Al-Mg-Si sheet processed through a combination of hot extrusion and cold rolling Materials Characterization. 164: 110299. DOI: 10.1016/J.Matchar.2020.110299 |
0.367 |
|
2020 |
Chen L, Yuan S, Li Z, Zheng W, Zhao G, Zhang C. Influence of homogenization treatment on microstructure and mechanical properties of Al-Zn-Mg alloy extruded by porthole die Materials Characterization. 161: 110148. DOI: 10.1016/J.Matchar.2020.110148 |
0.381 |
|
2020 |
Tang J, Chen L, Zhao G, Zhang C, Chu X. Formation mechanism and evolution of surface coarse grains on a ZK60 Mg profile extruded by a porthole die Journal of Materials Science & Technology. 47: 88-102. DOI: 10.1016/J.Jmst.2019.11.037 |
0.357 |
|
2020 |
Wang Y, Zhang C, Yang Y, Wang Y, Zhao G, Chen L. The identification of improved Johnson-Cook constitutive model in a wide range of temperature and its application in predicting FLCs of Al–Mg–Li sheet Journal of Materials Research and Technology. 9: 3782-3795. DOI: 10.1016/J.Jmrt.2020.02.005 |
0.332 |
|
2020 |
Xu X, Zhao G, Yu S, Wang Y, Chen X, Zhang W. Effects of extrusion parameters and post-heat treatments on microstructures and mechanical properties of extrusion weld seams in 2195 Al-Li alloy profiles Journal of Materials Research and Technology. 9: 2662-2678. DOI: 10.1016/J.Jmrt.2019.12.095 |
0.368 |
|
2020 |
Li S, Chen L, Chu X, Tang J, Zhao G, Zhang C. Improvement in mechanical properties of Al-Zn-Mg alloy by applying electric pulse during hot extrusion Journal of Materials Research and Technology. 9: 1210-1220. DOI: 10.1016/J.Jmrt.2019.11.048 |
0.316 |
|
2020 |
Chen L, Li Y, Zhao G, Zhang C, Gao F. Multi-objective optimization and experimental investigation on hot extruded plate of high strength Al-Zn-Mg alloy Journal of Materials Research and Technology. 9: 507-519. DOI: 10.1016/J.Jmrt.2019.10.080 |
0.377 |
|
2020 |
Li Y, Zhai W, Wang Z, Li X, Sun L, Li J, Zhao G. Investigation on the material flow and deformation behavior during ultrasonic-assisted incremental forming of straight grooves Journal of Materials Research and Technology. 9: 433-454. DOI: 10.1016/J.Jmrt.2019.10.072 |
0.343 |
|
2020 |
Zhang C, Liu M, Meng Z, Zhang Q, Zhao G, Chen L, Zhang H, Wang J. Microstructure evolution and precipitation characteristics of spray-formed and subsequently extruded 2195 Al-Li alloy plate during solution and aging process Journal of Materials Processing Technology. 283: 116718. DOI: 10.1016/J.Jmatprotec.2020.116718 |
0.354 |
|
2020 |
Chen X, Zhao G, Liu G, Sun L, Chen L, Zhang C. Microstructure evolution and mechanical properties of 2196 Al-Li alloy in hot extrusion process Journal of Materials Processing Technology. 275: 116348. DOI: 10.1016/J.Jmatprotec.2019.116348 |
0.398 |
|
2020 |
Tang J, Chen L, Zhao G, Zhang C, Sun L. Achieving three-layered Al/Mg/Al sheet via combining porthole die co-extrusion and hot forging Journal of Magnesium and Alloys. 8: 654-666. DOI: 10.1016/J.Jma.2020.02.016 |
0.314 |
|
2020 |
Li Z, Chen L, Tang J, Zhao G, Zhang C. Response of mechanical properties and corrosion behavior of Al–Zn–Mg alloy treated by aging and annealing: A comparative study Journal of Alloys and Compounds. 848: 156561. DOI: 10.1016/J.Jallcom.2020.156561 |
0.344 |
|
2020 |
Xu Z, Zhang C, Wang K, Zhang K, Zhao G, Chen L. Crystal plasticity prediction of texture evolution during helical extrusion process of aluminium alloys under three-dimensional deformation path Journal of Alloys and Compounds. 830: 154598. DOI: 10.1016/J.Jallcom.2020.154598 |
0.36 |
|
2020 |
Liang M, Chen L, Zhao G, Guo Y. Effects of solution treatment on the microstructure and mechanical properties of naturally aged EN AW 2024 Al alloy sheet Journal of Alloys and Compounds. 824: 153943. DOI: 10.1016/J.Jallcom.2020.153943 |
0.339 |
|
2020 |
Lu B, Jian N, Qu K, Hu F, Liu X, Xu J, Zhao G. Stepwise enhancement on optoelectronic performances of polyselenophene via electropolymerization of mono-, bi-, and tri-selenophene Electrochimica Acta. 340: 135974. DOI: 10.1016/J.Electacta.2020.135974 |
0.634 |
|
2020 |
Ge C, Wang G, Li X, Chai J, Li B, Wan G, Zhao G, Wang G. Large cyclic deformability of microcellular TPU/MWCNT composite film with conductive stability, and electromagnetic interference shielding and self-cleaning performance Composites Science and Technology. 197: 108247. DOI: 10.1016/J.Compscitech.2020.108247 |
0.361 |
|
2020 |
Wang G, Zhao J, Wang G, Zhao H, Lin J, Zhao G, Park CB. Strong and super thermally insulating in-situ nanofibrillar PLA/PET composite foam fabricated by high-pressure microcellular injection molding Chemical Engineering Journal. 390: 124520. DOI: 10.1016/J.Cej.2020.124520 |
0.349 |
|
2020 |
Wang X, Yu J, Liu J, Chen L, Yang Q, Wei H, Sun J, Wang Z, Zhang Z, Zhao G, Van Humbeeck J. Effect of process parameters on the phase transformation behavior and tensile properties of NiTi shape memory alloys fabricated by selective laser melting Additive Manufacturing. 36: 101545. DOI: 10.1016/J.Addma.2020.101545 |
0.37 |
|
2020 |
Zheng C, Pan C, Wang J, Zhao G, Ji Z. Mechanical joining behavior of Cu–Fe dissimilar metallic foils in laser shock clinching The International Journal of Advanced Manufacturing Technology. 110: 1001-1014. DOI: 10.1007/S00170-020-05920-8 |
0.314 |
|
2020 |
Zheng C, Zhang Y, Zhao G, Ji Z, Sun Y. Influence of process parameters on forming quality of Cu-Fe joints by laser shock hole-clinching The International Journal of Advanced Manufacturing Technology. 110: 887-898. DOI: 10.1007/S00170-020-05915-5 |
0.324 |
|
2019 |
Wang J, Chai J, Wang G, Zhao J, Zhang D, Li B, Zhao H, Zhao G. Strong and thermally insulating polylactic acid/glass fiber composite foam fabricated by supercritical carbon dioxide foaming. International Journal of Biological Macromolecules. PMID 31306706 DOI: 10.1016/J.Ijbiomac.2019.07.071 |
0.343 |
|
2019 |
Wang G, Zhang D, Li B, Wan G, Zhao G, Zhang A. Strong and thermal-resistance glass fiber-reinforced polylactic acid (PLA) composites enabled by heat treatment. International Journal of Biological Macromolecules. PMID 30731162 DOI: 10.1016/J.Ijbiomac.2019.02.020 |
0.347 |
|
2019 |
Chen L, Li Y, Tang J, Zhao G, Zhang C. Investigation on microstructure and mechanical properties of Al–5.50Zn–2.35Mg–1.36Cu alloy fabricated by hot extrusion process Journal of Materials Research. 34: 3151-3162. DOI: 10.1557/Jmr.2019.268 |
0.374 |
|
2019 |
Mu Y, Chen A, Zhao G, Cui Y, Feng J, Ren F. Prediction for the mechanical property of short fiber-reinforced polymer composites through process modeling method: Journal of Thermoplastic Composite Materials. 32: 1525-1546. DOI: 10.1177/0892705718799815 |
0.315 |
|
2019 |
Dong G, Zhao G, Hou J, Wang G, Mu Y. Effects of dynamic mold temperature control on melt pressure, cellular structure, and mechanical properties of microcellular injection-molded parts: An experimental study: Cellular Polymers. 38: 111-130. DOI: 10.1177/0262489319871741 |
0.322 |
|
2019 |
Xu X, Zhao G, Wang Y, Chen X, Zhang C. Microstructural evolution and its effect on mechanical properties of spray deposited 2195 alloy during porthole die extrusion process Vacuum. 167: 28-39. DOI: 10.1016/J.Vacuum.2019.05.032 |
0.37 |
|
2019 |
Zhang C, Wen M, Zhao G, Chen L, Sun W, Bai K. One-time determination of 20 material parameters in a strain-compensated constitutive model and its application in extrusion for an Al-Zn-Mg thin-walled profile Thin-Walled Structures. 135: 65-77. DOI: 10.1016/J.Tws.2018.10.034 |
0.375 |
|
2019 |
Wang G, Wan G, Chai J, Li B, Zhao G, Mu Y, Park CB. Structure-tunable thermoplastic polyurethane foams fabricated by supercritical carbon dioxide foaming and their compressive mechanical properties Journal of Supercritical Fluids. 149: 127-137. DOI: 10.1016/J.Supflu.2019.04.004 |
0.339 |
|
2019 |
Hou J, Zhao G, Wang G, Zhang L, Dong G, Li B. Ultra-high expansion linear polypropylene foams prepared in a semi-molten state under supercritical CO2 Journal of Supercritical Fluids. 145: 140-150. DOI: 10.1016/J.Supflu.2018.11.017 |
0.351 |
|
2019 |
Li S, Chen L, Tang J, Zhao G, Zhang C. Microstructure and mechanical properties of hot extruded Mg-8.89Li-0.96Zn alloy Results in Physics. 13: 102148. DOI: 10.1016/J.Rinp.2019.02.084 |
0.402 |
|
2019 |
Chen L, Sun W, Lin J, Zhao G, Wang G. Modelling of constitutive relationship, dynamic recrystallization and grain size of 40Cr steel during hot deformation process Results in Physics. 12: 784-792. DOI: 10.1016/J.Rinp.2018.12.046 |
0.375 |
|
2019 |
Wang G, Zhang D, Wan G, Li B, Zhao G. Glass fiber reinforced PLA composite with enhanced mechanical properties, thermal behavior, and foaming ability Polymer. 181: 121803. DOI: 10.1016/J.Polymer.2019.121803 |
0.355 |
|
2019 |
Zhang Q, Zhang C, Lin J, Zhao G, Chen L, Zhang H. Microstructure analysis and low-cycle fatigue behavior of spray-formed Al–Li alloy 2195 extruded plate Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 742: 773-787. DOI: 10.1016/J.Msea.2018.11.053 |
0.343 |
|
2019 |
Chen L, Li S, Chu X, Zhao G, Gao J. Grain refinement and strength enhancing of hot extruded Mg alloy by application of electric pulse Materials Letters. 241: 104-107. DOI: 10.1016/J.Matlet.2019.01.047 |
0.344 |
|
2019 |
Chen L, Chen G, Tang J, Zhao G, Zhang C. Evolution of grain structure, micro-texture and second phase during porthole die extrusion of Al–Zn–Mg alloy Materials Characterization. 158: 109953. DOI: 10.1016/J.Matchar.2019.109953 |
0.382 |
|
2019 |
Lu X, Zhao G, Xi H, Zhang C, Chen L, Sun L. Microstructure, mechanical properties and welding quality evaluation of longitudinal welds in hollow magnesium alloy profiles extruded at different ram speeds Materials Characterization. 151: 414-428. DOI: 10.1016/J.Matchar.2019.03.030 |
0.356 |
|
2019 |
Wang Y, Zhao G, Chen X, Xu X, Chen L, Zhang C. Effect of inter-annealing between two stages of extrusion on the microstructure and mechanical property for spray deposited Al–Cu–Li alloy 2195 Journal of Materials Research and Technology. 8: 3891-3907. DOI: 10.1016/J.Jmrt.2019.06.052 |
0.41 |
|
2019 |
Zhang C, Wang C, Zhang Q, Zhao G, Chen L. Influence of extrusion parameters on microstructure, texture, and second-phase particles in an Al-Mg-Si alloy Journal of Materials Processing Technology. 270: 323-334. DOI: 10.1016/J.Jmatprotec.2019.03.014 |
0.387 |
|
2019 |
Yu J, Zhao G, Zhao X, Chen L, Chen M. Microstructures of longitudinal/transverse welds and back-end defects and their influences on the corrosion resistance and mechanical properties of aluminum alloy extrusion profiles Journal of Materials Processing Technology. 267: 1-16. DOI: 10.1016/J.Jmatprotec.2018.12.006 |
0.361 |
|
2019 |
Yu J, Zhao G, Cui W, Chen L, Chen X. Evaluating the welding quality of longitudinal welds in a hollow profile manufactured by porthole die extrusion: Experiments and simulation Journal of Manufacturing Processes. 38: 502-515. DOI: 10.1016/J.Jmapro.2019.01.044 |
0.35 |
|
2019 |
Chai J, Wang G, Li B, Wan G, Zhang L, Zhao G. Strong and ductile poly (lactic acid) achieved by carbon dioxide treatment at room temperature Journal of Co 2 Utilization. 33: 292-302. DOI: 10.1016/J.Jcou.2019.06.006 |
0.343 |
|
2019 |
Tang J, Chen L, Zhao G, Zhang C, Yu J. Study on Al/Mg/Al sheet fabricated by combination of porthole die co-extrusion and subsequent hot rolling Journal of Alloys and Compounds. 784: 727-738. DOI: 10.1016/J.Jallcom.2019.01.005 |
0.306 |
|
2019 |
Wang Y, Zhao G, Xu X, Chen X, Zhang C. Constitutive modeling, processing map establishment and microstructure analysis of spray deposited Al-Cu-Li alloy 2195 Journal of Alloys and Compounds. 779: 735-751. DOI: 10.1016/J.Jallcom.2018.11.289 |
0.377 |
|
2019 |
Zhang C, Wang C, Guo R, Zhao G, Chen L, Sun W, Wang X. Investigation of dynamic recrystallization and modeling of microstructure evolution of an Al-Mg-Si aluminum alloy during high-temperature deformation Journal of Alloys and Compounds. 773: 59-70. DOI: 10.1016/J.Jallcom.2018.09.263 |
0.373 |
|
2019 |
Zhao J, Wang G, Zhang L, Li B, Wang C, Zhao G, Park CB. Lightweight and strong fibrillary PTFE reinforced polypropylene composite foams fabricated by foam injection molding European Polymer Journal. 119: 22-31. DOI: 10.1016/J.Eurpolymj.2019.07.016 |
0.358 |
|
2019 |
Mu Y, Chen A, Zhao G, Cui Y, Feng J, Ren F. Finite element simulation of three-dimensional viscoelastic flow at high Weissenberg number based on the log-conformation formulation Mechanics of Time-Dependent Materials. 23: 477-495. DOI: 10.1007/S11043-018-9401-4 |
0.326 |
|
2019 |
Yuan S, Chen L, Tang J, Zhao G, Zhang C, Yu J. Correlation between homogenization treatment and subsequent hot extrusion of Al–Mg–Si alloy Journal of Materials Science. 54: 9843-9856. DOI: 10.1007/S10853-019-03570-0 |
0.374 |
|
2019 |
Zhang W, Zhao G, Fu Q. Optimization of roll forming process for high-strength V channel steels The International Journal of Advanced Manufacturing Technology. 105: 2469-2480. DOI: 10.1007/S00170-019-04462-Y |
0.347 |
|
2019 |
Yu J, Zhao G, Chen X, Liang M. A comparative study on hot deformation and solid-state bonding behavior of aluminum alloys for the integration of solid-state joining and forming processes The International Journal of Advanced Manufacturing Technology. 104: 3849-3866. DOI: 10.1007/S00170-019-04153-8 |
0.363 |
|
2019 |
Mu Y, Li N, Hang L, Zhao G, Gao J, Niu Z. Investigation of the Rheological Behaviors of Polymeric Materials in the Film Casting Process through Multiscale Modeling and Simulation Method Macromolecular Theory and Simulations. 28: 1900001. DOI: 10.1002/Mats.201900001 |
0.33 |
|
2018 |
Lu X, Zhao G, Zhou J, Zhang C, Yu J. Microstructure and Mechanical Properties of the As-Cast and As-Homogenized Mg-Zn-Sn-Mn-Ca Alloy Fabricated by Semicontinuous Casting. Materials (Basel, Switzerland). 11. PMID 29710818 DOI: 10.3390/Ma11050703 |
0.369 |
|
2018 |
Wang G, Zhao G, Dong G, Song L, Park CB. Lightweight, thermally insulating, and low dielectric microcellular high-impact polystyrene (HIPS) foams fabricated by high-pressure foam injection molding with mold opening Journal of Materials Chemistry C. 6: 12294-12305. DOI: 10.1039/C8Tc04248A |
0.344 |
|
2018 |
Wang G, Zhao G, Wang S, Zhang L, Park CB. Injection-molded microcellular PLA/graphite nanocomposites with dramatically enhanced mechanical and electrical properties for ultra-efficient EMI shielding applications Journal of Materials Chemistry C. 6: 6847-6859. DOI: 10.1039/C8Tc01326H |
0.374 |
|
2018 |
Hou J, Zhao G, Zhang L, Dong G, Wang G. Foaming Mechanism of Polypropylene in Gas-Assisted Microcellular Injection Molding Industrial & Engineering Chemistry Research. 57: 4710-4720. DOI: 10.1021/Acs.Iecr.7B05389 |
0.326 |
|
2018 |
Dong G, Zhao G, Zhang L, Hou J, Li B, Wang G. Morphology Evolution and Elimination Mechanism of Bubble Marks on Surface of Microcellular Injection-Molded Parts with Dynamic Mold Temperature Control Industrial & Engineering Chemistry Research. DOI: 10.1021/Acs.Iecr.7B04199 |
0.332 |
|
2018 |
Lu X, Zhao G, Zhou J, Zhang C, Sun L. Effect of extrusion speeds on the microstructure, texture and mechanical properties of high-speed extrudable MgZnSnMnCa alloy Vacuum. 157: 180-191. DOI: 10.1016/J.Vacuum.2018.08.041 |
0.376 |
|
2018 |
Chen L, Liang M, Zhao G, Zhou J, Zhang C. Microstructure evolution of AZ91 alloy during hot extrusion process with various ram velocity Vacuum. 150: 136-143. DOI: 10.1016/J.Vacuum.2018.01.036 |
0.367 |
|
2018 |
Li B, Zhao G, Wang G, Zhang L, Gong J. Fabrication of high-expansion microcellular PLA foams based on pre-isothermal cold crystallization and supercritical CO2 foaming Polymer Degradation and Stability. 156: 75-88. DOI: 10.1016/J.Polymdegradstab.2018.08.009 |
0.347 |
|
2018 |
Zhang W, Zhao G, Fu Q. Study on the effects and mechanisms of induction heat treatment cycles on toughness of high frequency welded pipe welds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 736: 276-287. DOI: 10.1016/J.Msea.2018.09.004 |
0.358 |
|
2018 |
Wang Y, Zhao G, Xu X, Chen X, Zhang W. Microstructures and mechanical properties of spray deposited 2195 Al-Cu-Li alloy through thermo-mechanical processing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 727: 78-89. DOI: 10.1016/J.Msea.2018.04.116 |
0.362 |
|
2018 |
Chen L, Zhang J, Zhao G, Wang Z, Zhang C. Microstructure and mechanical properties of Mg-Al-Zn alloy extruded by porthole die with different initial billets Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 718: 390-397. DOI: 10.1016/J.Msea.2018.01.129 |
0.389 |
|
2018 |
Wu H, Zhao G, Wang G, Zhang W, Li Y. A new core-back foam injection molding method with chemical blowing agents Materials & Design. 144: 331-342. DOI: 10.1016/J.Matdes.2018.02.043 |
0.347 |
|
2018 |
Yu J, Zhao G. Interfacial structure and bonding mechanism of weld seams during porthole die extrusion of aluminum alloy profiles Materials Characterization. 138: 56-66. DOI: 10.1016/J.Matchar.2018.01.052 |
0.338 |
|
2018 |
Chen L, Zhang J, Tang J, Chen G, Zhao G, Zhang C. Microstructure and texture evolution during porthole die extrusion of Mg-Al-Zn alloy Journal of Materials Processing Technology. 259: 346-352. DOI: 10.1016/J.Jmatprotec.2018.05.003 |
0.36 |
|
2018 |
Tang J, Chen L, Fan X, Zhao G, Zhang C. Co-extrusion of dissimilar AA6063/AA7075 by porthole die at various temperatures Journal of Alloys and Compounds. 764: 162-169. DOI: 10.1016/J.Jallcom.2018.06.068 |
0.358 |
|
2018 |
Li Y, Chen L, Tang J, Zhao G, Zhang C. Effects of asymmetric feeder on microstructure and mechanical properties of high strength Al-Zn-Mg alloy by hot extrusion Journal of Alloys and Compounds. 749: 293-304. DOI: 10.1016/J.Jallcom.2018.03.188 |
0.396 |
|
2018 |
Lu X, Zhao G, Zhou J, Zhang C, Chen L, Tang S. Microstructure and mechanical properties of Mg-3.0Zn-1.0Sn-0.3Mn-0.3Ca alloy extruded at different temperatures Journal of Alloys and Compounds. 732: 257-269. DOI: 10.1016/J.Jallcom.2017.10.210 |
0.37 |
|
2018 |
Wang G, Hui Y, Zhang L, Zhao G. Research on temperature and pressure responses in the rapid mold heating and cooling method based on annular cooling channels and electric heating International Journal of Heat and Mass Transfer. 116: 1192-1203. DOI: 10.1016/J.Ijheatmasstransfer.2017.09.126 |
0.304 |
|
2018 |
Wang G, Zhao G, Dong G, Mu Y, Park CB, Wang G. Lightweight, super-elastic, and thermal-sound insulation bio-based PEBA foams fabricated by high-pressure foam injection molding with mold-opening European Polymer Journal. 103: 68-79. DOI: 10.1016/J.Eurpolymj.2018.04.002 |
0.354 |
|
2018 |
Lin J, Li J, Guan Y, Zhao G, Naceur H, Coutellier D. Geometrically nonlinear bending analysis of functionally graded beam with variable thickness by a meshless method Composite Structures. 189: 239-246. DOI: 10.1016/J.Compstruct.2018.01.063 |
0.309 |
|
2018 |
Wang G, Zhao G, Dong G, Mu Y, Park CB. Lightweight and strong microcellular injection molded PP/talc nanocomposite Composites Science and Technology. 168: 38-46. DOI: 10.1016/J.Compscitech.2018.09.009 |
0.375 |
|
2018 |
Li J, Guan Y, Wang G, Zhao G, Lin J, Naceur H, Coutellier D. Meshless modeling of bending behavior of bi-directional functionally graded beam structures Composites Part B-Engineering. 155: 104-111. DOI: 10.1016/J.Compositesb.2018.08.029 |
0.315 |
|
2018 |
Wang G, Zhao G, Zhang L, Mu Y, Park CB. Lightweight and tough nanocellular PP/PTFE nanocomposite foams with defect-free surfaces obtained using in situ nanofibrillation and nanocellular injection molding Chemical Engineering Journal. 350: 1-11. DOI: 10.1016/J.Cej.2018.05.161 |
0.381 |
|
2018 |
Zhang W, Zhao G, Zhai Z, Zhao C, Fu Q. Calculation method of spatial configuration of tube billet in roll forming process of a high strength steel drive shaft tube The International Journal of Advanced Manufacturing Technology. 97: 3339-3358. DOI: 10.1007/S00170-018-2209-1 |
0.313 |
|
2018 |
Sun W, Chen L, Zhang T, Zhang K, Zhao G, Wang G. Preform optimization and microstructure analysis on hot precision forging process of a half axle flange The International Journal of Advanced Manufacturing Technology. 95: 2157-2167. DOI: 10.1007/S00170-017-1377-8 |
0.387 |
|
2018 |
Wang D, Zhang C, Wang C, Zhao G, Chen L, Sun W. Application and analysis of spread die and flat container in the extrusion of a large-size, hollow, and flat-wide aluminum alloy profile The International Journal of Advanced Manufacturing Technology. 94: 4247-4263. DOI: 10.1007/S00170-017-1127-Y |
0.412 |
|
2017 |
Wang G, Wang L, Mark LH, Shaayegan V, Wang G, Li H, Zhao G, Park CB. Ultra-low threshold and lightweight biodegradable porous PLA/MWCNT with segregated conductive networks for high-performance thermal insulation and electromagnetic interference shielding applications. Acs Applied Materials & Interfaces. PMID 29206437 DOI: 10.1021/Acsami.7B14111 |
0.324 |
|
2017 |
Wang G, Wang C, Zhao J, Wang G, Park CB, Zhao G. Modelling of thermal transport through a nanocellular polymer foam: toward the generation of a new superinsulating material. Nanoscale. PMID 28440837 DOI: 10.1039/C7Nr00327G |
0.324 |
|
2017 |
Zhang A, Zhao G, Hui Y, Guan Y. Mechanical and Thermal Properties of ABS/PMMA/Potassium Titanate Whisker Composites Polymer-Plastics Technology and Engineering. 56: 382-390. DOI: 10.1080/03602559.2016.1211698 |
0.322 |
|
2017 |
Li Y, Chen X, Sun J, Li J, Zhao G. Effects of ultrasonic vibration on deformation mechanism of incremental point-forming process Procedia Engineering. 207: 777-782. DOI: 10.1016/J.Proeng.2017.10.828 |
0.353 |
|
2017 |
Yu J, Zhao G. Study on the welding quality in the porthole die extrusion process of aluminum alloy profiles Procedia Engineering. 207: 401-406. DOI: 10.1016/J.Proeng.2017.10.795 |
0.372 |
|
2017 |
Zhang C, Dong Y, Zhao G, Chen L. Experimental and numerical investigations on transverse weld of hollow aluminum profile during porthole extrusion process Procedia Engineering. 207: 1653-1658. DOI: 10.1016/J.Proeng.2017.10.1095 |
0.4 |
|
2017 |
Wang G, Zhao J, Yu K, Mark LH, Wang G, Gong P, Park CB, Zhao G. Role of elastic strain energy in cell nucleation of polymer foaming and its application for fabricating sub-microcellular TPU microfilms Polymer. 119: 28-39. DOI: 10.1016/J.Polymer.2017.05.016 |
0.318 |
|
2017 |
Yu J, Zhao G, Zhang C, Chen L. Dynamic evolution of grain structure and micro-texture along a welding path of aluminum alloy profiles extruded by porthole dies Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 682: 679-690. DOI: 10.1016/J.Msea.2016.11.089 |
0.361 |
|
2017 |
Hou J, Zhao G, Wang G, Dong G, Xu J. A novel gas-assisted microcellular injection molding method for preparing lightweight foams with superior surface appearance and enhanced mechanical performance Materials & Design. 127: 115-125. DOI: 10.1016/J.Matdes.2017.04.073 |
0.329 |
|
2017 |
Fan X, Chen L, Chen G, Zhao G, Zhang C. Joining of 1060/6063 aluminum alloys based on porthole die extrusion process Journal of Materials Processing Technology. 250: 65-72. DOI: 10.1016/J.Jmatprotec.2017.07.009 |
0.349 |
|
2017 |
Zhang C, Dong Y, Wang C, Zhao G, Chen L, Sun W. Evolution of transverse weld during porthole extrusion of AA7N01 hollow profile Journal of Materials Processing Technology. 248: 103-114. DOI: 10.1016/J.Jmatprotec.2017.05.017 |
0.365 |
|
2017 |
Yu J, Zhao G, Cui W, Zhang C, Chen L. Microstructural evolution and mechanical properties of welding seams in aluminum alloy profiles extruded by a porthole die under different billet heating temperatures and extrusion speeds Journal of Materials Processing Technology. 247: 214-222. DOI: 10.1016/J.Jmatprotec.2017.04.030 |
0.404 |
|
2017 |
Chen G, Chen L, Zhao G, Zhang C. Microstructure evolution during solution treatment of extruded Al-Zn-Mg profile containing a longitudinal weld seam Journal of Alloys and Compounds. 729: 210-221. DOI: 10.1016/J.Jallcom.2017.09.143 |
0.32 |
|
2017 |
Chen G, Chen L, Zhao G, Zhang C, Cui W. Microstructure analysis of an Al-Zn-Mg alloy during porthole die extrusion based on modeling of constitutive equation and dynamic recrystallization Journal of Alloys and Compounds. 710: 80-91. DOI: 10.1016/J.Jallcom.2017.03.240 |
0.393 |
|
2017 |
Zhang L, Zhao G, Wang G, Dong G, Wu H. Investigation on bubble morphological evolution and plastic part surface quality of microcellular injection molding process based on a multiphase-solid coupled heat transfer model International Journal of Heat and Mass Transfer. 104: 1246-1258. DOI: 10.1016/J.Ijheatmasstransfer.2016.09.043 |
0.389 |
|
2017 |
Wang G, Zhao J, Wang G, Mark LH, Park CB, Zhao G. Low-density and structure-tunable microcellular PMMA foams with improved thermal-insulation and compressive mechanical properties European Polymer Journal. 95: 382-393. DOI: 10.1016/J.Eurpolymj.2017.08.025 |
0.36 |
|
2017 |
Wang G, Zhao J, Mark LH, Wang G, Yu K, Wang C, Park CB, Zhao G. Ultra-tough and super thermal-insulation nanocellular PMMA/TPU Chemical Engineering Journal. 325: 632-646. DOI: 10.1016/J.Cej.2017.05.116 |
0.36 |
|
2017 |
Zhang L, Zhao G, Wang G. Formation mechanism of porous structure in plastic parts injected by microcellular injection molding technology with variable mold temperature Applied Thermal Engineering. 114: 484-497. DOI: 10.1016/J.Applthermaleng.2016.11.180 |
0.399 |
|
2017 |
Zhang J, Chen L, Zhao G, Zhang C, Zhou J. Study on solid bonding behavior of AZ31 Mg alloy during porthole die extrusion process The International Journal of Advanced Manufacturing Technology. 93: 2791-2799. DOI: 10.1007/S00170-017-0722-2 |
0.391 |
|
2017 |
Li Y, Chen X, Liu Z, Sun J, Li F, Li J, Zhao G. A review on the recent development of incremental sheet-forming process The International Journal of Advanced Manufacturing Technology. 92: 2439-2462. DOI: 10.1007/S00170-017-0251-Z |
0.303 |
|
2017 |
Zhang C, Yang S, Zhang Q, Zhao G, Lu P, Sun W. Automatic optimization design of a feeder extrusion die with response surface methodology and mesh deformation technique The International Journal of Advanced Manufacturing Technology. 91: 3181-3193. DOI: 10.1007/S00170-017-0018-6 |
0.365 |
|
2017 |
Chen G, Chen L, Zhao G, Lu B. Investigation on longitudinal weld seams during porthole die extrusion process of high strength 7075 aluminum alloy The International Journal of Advanced Manufacturing Technology. 91: 1897-1907. DOI: 10.1007/S00170-016-9902-8 |
0.373 |
|
2017 |
Mu Y, Hang L, Chen A, Zhao G, Xu D. Influence of die geometric structure on flow balance in complex hollow plastic profile extrusion The International Journal of Advanced Manufacturing Technology. 91: 1275-1287. DOI: 10.1007/S00170-016-9790-Y |
0.358 |
|
2017 |
Liu J, Zhang S, Zhao G, Wang G. Numerical and experimental investigations on polymer melt flow phenomenon in a vario‐thermal mold cavity Journal of Applied Polymer Science. 134: 45193. DOI: 10.1002/App.45193 |
0.364 |
|
2016 |
Li S, Zhao G, Dong G, Wang J. Study on reducing sink mark depth of a microcellular injection molded part with many reinforcing ribs Journal of Cellular Plastics. 52: 479-502. DOI: 10.1177/0021955X15579244 |
0.359 |
|
2016 |
Wang J, Zhao G, Li M. Establishment of processing map and analysis of microstructure on multi-crystalline tungsten plastic deformation process at elevated temperature Materials and Design. 103: 268-277. DOI: 10.1016/J.Matdes.2016.04.055 |
0.37 |
|
2016 |
Dong Y, Zhang C, Zhao G, Guan Y, Gao A, Sun W. Constitutive equation and processing maps of an Al-Mg-Si aluminum alloy: Determination and application in simulating extrusion process of complex profiles Materials and Design. 92: 983-997. DOI: 10.1016/J.Matdes.2015.12.113 |
0.387 |
|
2016 |
Wang J, Zhao G, Chen L, Li J. A comparative study of several constitutive models for powder metallurgy tungsten at elevated temperature Materials & Design. 90: 91-100. DOI: 10.1016/J.Matdes.2015.10.114 |
0.354 |
|
2016 |
Yu J, Zhao G, Chen L. Analysis of longitudinal weld seam defects and investigation of solid-state bonding criteria in porthole die extrusion process of aluminum alloy profiles Journal of Materials Processing Technology. 237: 31-47. DOI: 10.1016/J.Jmatprotec.2016.05.024 |
0.404 |
|
2016 |
Yu J, Zhao G, Chen L. Investigation of interface evolution, microstructure and mechanical properties of solid-state bonding seams in hot extrusion process of aluminum alloy profiles Journal of Materials Processing Technology. 230: 153-166. DOI: 10.1016/J.Jmatprotec.2015.11.020 |
0.393 |
|
2016 |
Huang L, Zhao G, Wang Z, Zhang X. Adaptive hexahedral mesh generation and regeneration using an improved grid-based method Advances in Engineering Software. 102: 49-70. DOI: 10.1016/J.Advengsoft.2016.09.004 |
0.3 |
|
2016 |
Dong Y, Zhang C, Lu X, Wang C, Zhao G. Constitutive Equations and Flow Behavior of an As-Extruded AZ31 Magnesium Alloy Under Large Strain Condition Journal of Materials Engineering and Performance. 1-15. DOI: 10.1007/S11665-016-2092-6 |
0.342 |
|
2016 |
Dong Y, Zhang C, Luo W, Yang S, Zhao G. Material flow analysis and extrusion die modifications for an irregular and multitooth aluminum alloy radiator International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-8666-5 |
0.329 |
|
2016 |
Zhang C, Yang S, Wang C, Zhao G, Gao A, Wang L. Numerical and experimental investigation on thermo-mechanical behavior during transient extrusion process of high-strength 7 × × × aluminum alloy profile International Journal of Advanced Manufacturing Technology. 1-12. DOI: 10.1007/S00170-016-8595-3 |
0.439 |
|
2016 |
Zhang C, Chen H, Zhao G, Zhang L, Lou S. Optimization of porthole extrusion dies with the developed algorithm based on finite volume method International Journal of Advanced Manufacturing Technology. 1-13. DOI: 10.1007/S00170-016-8522-7 |
0.371 |
|
2016 |
Zhao H, Yan X, Zhao G, Guo Z. Microcellular injection molded polylactic acid/poly (ε‐caprolactone) blends with supercritical CO2: Correlation between rheological properties and their foaming behavior Polymer Engineering and Science. 56: 939-946. DOI: 10.1002/Pen.24323 |
0.347 |
|
2015 |
Lu B, Zhen S, Ming S, Xu J, Zhao G. Effect of electrolytes on the electropolymerization and optoelectronic properties of poly(3-methylselenophene) Rsc Advances. 5: 70649-70660. DOI: 10.1039/C5Ra11849B |
0.634 |
|
2015 |
Zhang L, Zhao G, Dong G, Li S, Wang G. Bubble morphological evolution and surface defect formation mechanism in the microcellular foam injection molding process Rsc Advances. 5: 70032-70050. DOI: 10.1039/C5Ra07512B |
0.372 |
|
2015 |
Zhao H, Zhao G, Turng LS, Peng X. Enhancing Nanofiller Dispersion Through Prefoaming and Its Effect on the Microstructure of Microcellular Injection Molded Polylactic Acid/Clay Nanocomposites Industrial and Engineering Chemistry Research. 54: 7122-7130. DOI: 10.1021/Acs.Iecr.5B01130 |
0.337 |
|
2015 |
Chen L, Zhao G, Yu J. Hot deformation behavior and constitutive modeling of homogenized 6026 aluminum alloy Materials & Design. 74: 25-35. DOI: 10.1016/J.Matdes.2015.02.024 |
0.364 |
|
2015 |
Zhang C, Chu X, Guines D, Leotoing L, Ding J, Zhao G. Dedicated linear – Voce model and its application in investigating temperature and strain rate effects on sheet formability of aluminum alloys Materials & Design. 67: 522-530. DOI: 10.1016/J.Matdes.2014.10.074 |
0.354 |
|
2015 |
Chen L, Zhao G, Yu J, Zhang W. Constitutive analysis of homogenized 7005 aluminum alloy at evaluated temperature for extrusion process Materials & Design. 66: 129-136. DOI: 10.1016/J.Matdes.2014.10.045 |
0.39 |
|
2015 |
Zhang C, Ding J, Dong Y, Zhao G, Gao A, Wang L. Identification of friction coefficients and strain-compensated Arrhenius-type constitutive model by a two-stage inverse analysis technique International Journal of Mechanical Sciences. 98: 195-204. DOI: 10.1016/J.Ijmecsci.2015.04.015 |
0.339 |
|
2015 |
Mu Y, Zhao G, Wu X, Hang L, Chu H. Continuous modeling and simulation of flow-swell-crystallization behaviors of viscoelastic polymer melts in the hollow profile extrusion process Applied Mathematical Modelling. 39: 1352-1368. DOI: 10.1016/J.Apm.2014.09.008 |
0.369 |
|
2015 |
Chen L, Zhao G, Yu J, Zhang W. Evaluation of a pyramid die extrusion for a hollow aluminum profile using FE simulation Journal of Mechanical Science and Technology. 29: 2195-2203. DOI: 10.1007/S12206-015-0440-3 |
0.381 |
|
2015 |
Chen L, Zhao G, Gong J, Chen X, Chen M. Hot Deformation Behaviors and Processing Maps of 2024 Aluminum Alloy in As-cast and Homogenized States Journal of Materials Engineering and Performance. DOI: 10.1007/S11665-015-1734-4 |
0.354 |
|
2015 |
Wang W, Zhao G, Guan Y, Wu X, Hui Y. Effect of rapid heating cycle injection mold temperature on crystal structures, morphology of polypropylene and surface quality of plastic parts Journal of Polymer Research. 22. DOI: 10.1007/S10965-015-0731-5 |
0.326 |
|
2015 |
Chen L, Zhao G, Yu J. Effects of ram velocity on pyramid die extrusion of hollow aluminum profile The International Journal of Advanced Manufacturing Technology. 79: 2117-2125. DOI: 10.1007/S00170-015-7059-5 |
0.368 |
|
2015 |
Guan Y, Bai X, Liu M, Song L, Zhao G. Preform design in forging process of complex parts by using quasi-equipotential field and response surface methods International Journal of Advanced Manufacturing Technology. 79: 21-29. DOI: 10.1007/S00170-014-6775-6 |
0.302 |
|
2015 |
Zhang C, Zhao G, Guan Y, Gao A, Wang L, Li P. Virtual tryout and optimization of the extrusion die for an aluminum profile with complex cross-sections The International Journal of Advanced Manufacturing Technology. 78: 927-937. DOI: 10.1007/S00170-014-6691-9 |
0.376 |
|
2015 |
Wang GL, Zhao GQ, Wang JC, Zhang L. Research on formation mechanisms and control of external and inner bubble morphology in microcellular injection molding Polymer Engineering and Science. 55: 807-835. DOI: 10.1002/Pen.23948 |
0.365 |
|
2015 |
Zhao H, Zhao G, Turng LS, Peng X. Structural evolution of uniaxial tensile-deformed injection molded poly(e{open}-caprolactone)/hydroxyapatite composites Polymer Composites. DOI: 10.1002/Pc.23747 |
0.346 |
|
2015 |
Wang W, Zhao G, Wu X, Li X, Wang C. Investigation on phosphorus halogen‐free flame‐retardancy systems in short glass fiber‐reinforced PC/ABS composites under rapid thermal cycle molding process condition Polymer Composites. 36: 1653-1663. DOI: 10.1002/Pc.23075 |
0.309 |
|
2015 |
Wang W, Zhao G, Wu X, Zhai Z. The effect of high temperature annealing process on crystallization process of polypropylene, mechanical properties, and surface quality of plastic parts Journal of Applied Polymer Science. 132. DOI: 10.1002/App.42773 |
0.374 |
|
2015 |
Zhang A, Zhao G, Guan Y. Effects of mold cavity temperature on surface quality and mechanical properties of nanoparticle‐filled polymer in rapid heat cycle molding Journal of Applied Polymer Science. 132. DOI: 10.1002/App.41420 |
0.387 |
|
2014 |
Meng W, Zhao G, Guan Y. The effects of forming parameters on conical ring rolling process. Thescientificworldjournal. 2014: 235656. PMID 25202716 DOI: 10.1155/2014/235656 |
0.343 |
|
2014 |
Meng W, Zhao G, Guan Y. A Mandrel Feeding Strategy in Conical Ring Rolling Process Mathematical Problems in Engineering. 2014: 1-13. DOI: 10.1155/2014/364274 |
0.322 |
|
2014 |
Lu B, Zhen S, Zhang S, Xu J, Zhao G. Highly stable hybrid selenophene-3,4-ethylenedioxythiophene as electrically conducting and electrochromic polymers Polymer Chemistry. 5: 4896-4908. DOI: 10.1039/C4Py00529E |
0.627 |
|
2014 |
Zhang C, Chu X, Guines D, Leotoing L, Ding J, Zhao G. Effects of Temperature and Strain Rate on the Forming Limit Curves of AA5086 Sheet Procedia Engineering. 81: 772-778. DOI: 10.1016/J.Proeng.2014.10.075 |
0.376 |
|
2014 |
Guan Y, Bai X, Liu M, Song L, Zhao G. 3D Preform Design in Forging Process based on Quasi-quipotential Field and Response Surface Methods Procedia Engineering. 81: 468-473. DOI: 10.1016/J.Proeng.2014.10.024 |
0.303 |
|
2014 |
Meng W, Zhao GQ. Effects of key simulation parameters on conical ring rolling process Procedia Engineering. 81: 286-291. DOI: 10.1016/J.Proeng.2014.09.165 |
0.309 |
|
2014 |
Wang Gl, Zhao Gq, Wang Xx. Heating/cooling channels design for an automotive interior part and its evaluation in rapid heat cycle molding Materials and Design. 59: 310-322. DOI: 10.1016/J.Matdes.2014.02.047 |
0.324 |
|
2014 |
Wang G, Zhao G, Wang X. Development and evaluation of a new rapid mold heating and cooling method for rapid heat cycle molding International Journal of Heat and Mass Transfer. 78: 99-111. DOI: 10.1016/J.Ijheatmasstransfer.2014.06.062 |
0.343 |
|
2014 |
Mu Y, Zhao G, Chen A, Dong G, Li S. Numerical investigation of the crystallization and orientation behavior in polymer processing with a two-phase model Computers & Chemical Engineering. 63: 91-107. DOI: 10.1016/J.Compchemeng.2013.12.010 |
0.362 |
|
2014 |
Mu Y, Zhao G, Chen A, Dong G, Li S. Finite element simulation of three-dimensional viscoelastic planar contraction flow with multi-mode FENE-P constitutive model Polymer Bulletin. 71: 3131-3150. DOI: 10.1007/S00289-014-1241-Z |
0.314 |
|
2014 |
Chen L, Zhao G, Yu J, Zhang W, Wu T. Analysis and porthole die design for a multi-hole extrusion process of a hollow, thin-walled aluminum profile The International Journal of Advanced Manufacturing Technology. 74: 383-392. DOI: 10.1007/S00170-014-6003-4 |
0.384 |
|
2014 |
Zhao G, Chen H, Zhang C, Guan Y, Anjiang G, Peng L. Die optimization design and experimental study of a large wallboard aluminum alloy profile used for high-speed train The International Journal of Advanced Manufacturing Technology. 74: 539-549. DOI: 10.1007/S00170-014-5903-7 |
0.373 |
|
2014 |
Mu Y, Zhao G, Chen A, Li S. Modeling and simulation of morphology variation during the solidification of polymer melts with amorphous and semi-crystalline phases Polymers For Advanced Technologies. 25: 1471-1483. DOI: 10.1002/Pat.3389 |
0.377 |
|
2014 |
Dong G, Zhao G, Guan Y, Wang G, Wang X. The cell forming process of microcellular injection‐molded parts Journal of Applied Polymer Science. 131. DOI: 10.1002/App.40365 |
0.336 |
|
2013 |
Zhang C, Zhao G, Li T, Guan Y, Chen H, Li P. An Investigation of Die Wear Behavior During Aluminum Alloy 7075 Tube Extrusion Journal of Tribology-Transactions of the Asme. 135: 11602. DOI: 10.1115/1.4023081 |
0.368 |
|
2013 |
Sun X, Zhao G, Zhang C, Guan Y, Gao A. Optimal Design of Second-Step Welding Chamber for a Condenser Tube Extrusion Die Based on the Response Surface Method and the Genetic Algorithm Materials and Manufacturing Processes. 28: 823-834. DOI: 10.1080/10426914.2012.736657 |
0.338 |
|
2013 |
Li W, Zhao G, Ma X, Gao J. Study on Forming Limit Diagrams of AZ31B Alloy Sheet at Different Temperatures Materials and Manufacturing Processes. 28: 306-311. DOI: 10.1080/10426914.2012.689453 |
0.347 |
|
2013 |
Li T, Zhao G, Zhang C, Guan Y, Sun X, Li H. Effect of Process Parameters on Die Wear Behavior of Aluminum Alloy Rod Extrusion Materials and Manufacturing Processes. 28: 312-318. DOI: 10.1080/10426914.2012.675536 |
0.383 |
|
2013 |
Lu B, Chen S, Xu J, Zhao G. Thermoelectric Performances of Different Types of Polyselenophene and its Copolymers with 3-Methylthiophene via Electropolymerization Synthetic Metals. 183: 8-15. DOI: 10.1016/J.Synthmet.2013.09.013 |
0.636 |
|
2013 |
Li H, He L, Zhao G, Zhang L. Constitutive relationships of hot stamping boron steel B1500HS based on the modified Arrhenius and Johnson–Cook model Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 580: 330-348. DOI: 10.1016/J.Msea.2013.05.023 |
0.349 |
|
2013 |
Wang X, Zhao G, Wang G. Research on the reduction of sink mark and warpage of the molded part in rapid heat cycle molding process Materials & Design. 47: 779-792. DOI: 10.1016/J.Matdes.2012.12.047 |
0.387 |
|
2013 |
Wang G, Zhao G, Wang X. Effects of cavity surface temperature on mechanical properties of specimens with and without a weld line in rapid heat cycle molding Materials & Design. 46: 457-472. DOI: 10.1016/J.Matdes.2012.10.054 |
0.369 |
|
2013 |
Wang G, Zhao G, Wang X. Effects of cavity surface temperature on reinforced plastic part surface appearance in rapid heat cycle moulding Materials & Design. 44: 509-520. DOI: 10.1016/J.Matdes.2012.08.039 |
0.329 |
|
2013 |
Zhang C, Zhao G, Chen H, Guan Y, Cai H, Gao B. Investigation on Effects of Die Orifice Layout on Three-Hole Porthole Extrusion of Aluminum Alloy 6063 Tubes Journal of Materials Engineering and Performance. 22: 1223-1232. DOI: 10.1007/S11665-012-0405-Y |
0.385 |
|
2013 |
Zhao G, Chen H, Zhang C, Guan Y. Multiobjective optimization design of porthole extrusion die using Pareto-based genetic algorithm The International Journal of Advanced Manufacturing Technology. 69: 1547-1556. DOI: 10.1007/S00170-013-5124-5 |
0.313 |
|
2013 |
Mu Y, Zhao G, Chen A, Wu X. Modeling and simulation of polymer melts flow in the extrusion process of plastic profile with metal insert The International Journal of Advanced Manufacturing Technology. 67: 629-646. DOI: 10.1007/S00170-012-4511-7 |
0.401 |
|
2013 |
Guan Y, Yuan G, Sun S, Zhao G. Process simulation and optimization of laser tube bending The International Journal of Advanced Manufacturing Technology. 65: 333-342. DOI: 10.1007/S00170-012-4172-6 |
0.308 |
|
2013 |
Mu Y, Zhao G, Chen A, Wu X. Modeling and Simulation of the Crystallization Behavior of Polymer Melts in the Hollow‐Profile Extrusion Process Using the Coexistence Model of Spherulite and Shish‐Kebab Macromolecular Theory and Simulations. 22: 36-51. DOI: 10.1002/Mats.201200028 |
0.311 |
|
2013 |
Mu Y, Zhao G, Chen A, Wu X. Modeling and simulation of three-dimensional extrusion swelling of viscoelastic fluids with PTT, Giesekus and FENE-P constitutive models International Journal For Numerical Methods in Fluids. 72: 846-863. DOI: 10.1002/Fld.3760 |
0.323 |
|
2013 |
Zhang A, Zhao G, Guan Y. Effect of surface modifiers and surface modification methods on properties of acrylonitrile–butadiene–styrene/poly(methyl methacrylate)/nano‐calcium carbonate composites Journal of Applied Polymer Science. 127: 2520-2528. DOI: 10.1002/App.37577 |
0.334 |
|
2013 |
Mu Y, Zhao G, Wu X, Zhai J. Finite-Element Simulation of Polymer Flow and Extrudate Swell Through Hollow Profile Extrusion Die with the Multimode Differential Viscoelastic Model Advances in Polymer Technology. 32. DOI: 10.1002/Adv.20265 |
0.363 |
|
2012 |
Li H, He L, Zhao G, Zhang L. Optimization of Heat Treatment Parameters of Boron Steel B1500HS Using Response Surface Methodology Materials Performance and Characterization. 1: 104359. DOI: 10.1520/Mpc104359 |
0.357 |
|
2012 |
Guan Y, Zhang C, Zhao G, Sun X, Li P. Design of a Multihole Porthole Die for Aluminum Tube Extrusion Materials and Manufacturing Processes. 27: 147-153. DOI: 10.1080/10426914.2011.564252 |
0.357 |
|
2012 |
Zhang C, Zhao G, Chen Z, Chen H, Kou F. Effect of extrusion stem speed on extrusion process for a hollow aluminum profile Materials Science and Engineering B-Advanced Functional Solid-State Materials. 177: 1691-1697. DOI: 10.1016/J.Mseb.2011.09.041 |
0.349 |
|
2012 |
Mu Y, Zhao G, Chen A, Wu X. Numerical investigation of the thermally and flow induced crystallization behavior of semi-crystalline polymers by using finite element–finite difference method Computers & Chemical Engineering. 46: 190-204. DOI: 10.1016/J.Compchemeng.2012.06.026 |
0.358 |
|
2012 |
Mu Y, Zhao G, Wu X, Zhai J. Modeling and simulation of three-dimensional planar contraction flow of viscoelastic fluids with PTT, Giesekus and FENE-P constitutive models Applied Mathematics and Computation. 218: 8429-8443. DOI: 10.1016/J.Amc.2012.01.067 |
0.309 |
|
2012 |
Zhang C, Zhao G, Chen H, Guan Y, Li H. Optimization of an aluminum profile extrusion process based on Taguchi’s method with S/N analysis The International Journal of Advanced Manufacturing Technology. 60: 589-599. DOI: 10.1007/S00170-011-3622-X |
0.369 |
|
2012 |
Zhang C, Zhao G, Chen H, Guan Y, Kou F. Numerical simulation and metal flow analysis of hot extrusion process for a complex hollow aluminum profile The International Journal of Advanced Manufacturing Technology. 60: 101-110. DOI: 10.1007/S00170-011-3609-7 |
0.346 |
|
2012 |
Wang G, Zhao G, Guan Y. Thermal response of an electric heating rapid heat cycle molding mold and its effect on surface appearance and tensile strength of the molded part Journal of Applied Polymer Science. 128: 1339-1352. DOI: 10.1002/App.38274 |
0.381 |
|
2011 |
Cheng G, Zhao G, Guan Y, Wang Z. Study on Deflection Performance of Radial Tire by Finite Element Method Noise & Vibration Worldwide. 42: 30-35. DOI: 10.1260/0957-4565.42.11.30 |
0.305 |
|
2011 |
Liu J, Zhao G, Guan Y. Influence of Mold Temperature on Melt Filling Process of a Thin Plate Part with Microstructures in Injection Molding Advanced Science Letters. 4: 2681-2685. DOI: 10.1166/Asl.2011.1648 |
0.368 |
|
2011 |
Wang G, Zhao G, Guan Y. Development and Experimental Study of a New Electric-Heating Rapid Thermal Response Mold for RHCM Process Advanced Science Letters. 4: 2082-2086. DOI: 10.1166/Asl.2011.1418 |
0.304 |
|
2011 |
Chen H, Zhao G, Zhang C, Guan Y, Liu H, Kou F. Numerical Simulation of Extrusion Process and Die Structure Optimization for a Complex Aluminum Multicavity Wallboard of High-Speed Train Materials and Manufacturing Processes. 26: 1530-1538. DOI: 10.1080/10426914.2011.551950 |
0.347 |
|
2011 |
Liu J, Zhao G, Wang G, Guan Y. Fully Coupled Transient Heat Transfer and Melt Filling Simulations in Rapid Heat Cycle Molding with Steam Heating Polymer-Plastics Technology and Engineering. 50: 423-437. DOI: 10.1080/03602559.2010.543233 |
0.335 |
|
2011 |
cheng G, Wang W, Zhao G, Guan Y, Wang Z. Influence of Camber Angle on Rolling Radial Tire under Braking State Procedia Engineering. 15: 4310-4315. DOI: 10.1016/J.Proeng.2011.08.809 |
0.33 |
|
2011 |
Wang G, Zhao G, Li H, Guan Y. Multi-objective optimization design of the heating/cooling channels of the steam-heating rapid thermal response mold using particle swarm optimization International Journal of Thermal Sciences. 50: 790-802. DOI: 10.1016/J.Ijthermalsci.2011.01.005 |
0.335 |
|
2011 |
Wang G, Zhao G, Li H, Guan Y. Research on optimization design of the heating/cooling channels for rapid heat cycle molding based on response surface methodology and constrained particle swarm optimization Expert Systems With Applications. 38: 6705-6719. DOI: 10.1016/J.Eswa.2010.11.063 |
0.313 |
|
2011 |
He L, Zhao G, Li H, Xiang N. Research on mechanical properties of 22MnB5 steel quenched in a steel die Journal of Shanghai Jiaotong University (Science). 16: 129-132. DOI: 10.1007/S12204-011-1106-7 |
0.354 |
|
2011 |
Zhang C, Leotoing L, Zhao G, Guines D, Ragneau E. A Comparative Study of Different Necking Criteria for Numerical and Experimental Prediction of FLCs Journal of Materials Engineering and Performance. 20: 1036-1042. DOI: 10.1007/S11665-010-9729-7 |
0.325 |
|
2011 |
Lu P, Zhao G, Guan Y, Wu X. Research on rigid/visco-plastic element-free Galerkin method and key simulation techniques for three-dimensional bulk metal forming processes The International Journal of Advanced Manufacturing Technology. 53: 485-503. DOI: 10.1007/S00170-010-2859-0 |
0.344 |
|
2011 |
Zhao G, Wang G, Guan Y, Li H. Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels Polymers For Advanced Technologies. 22: 476-487. DOI: 10.1002/Pat.1536 |
0.335 |
|
2011 |
Wang G, Zhao G, Guan Y. Research on optimum heating system design for rapid thermal response mold with electric heating based on response surface methodology and particle swarm optimization Journal of Applied Polymer Science. 119: 902-921. DOI: 10.1002/App.32771 |
0.32 |
|
2010 |
Li H, He L, Zhao G. Metallo-Thermo-Mechanical Coupled Analysis of Quenching Process for the Plane Strain Problems Journal of Astm International. 7: 1-20. DOI: 10.1520/Jai103079 |
0.334 |
|
2010 |
Zhao G, Li X, Guan Y. Multi-Objective Optimization of the Heating Rods Layout for Rapid Electrical Heating Cycle Injection Mold Journal of Mechanical Design. 132: 61001. DOI: 10.1115/1.4001529 |
0.321 |
|
2010 |
Zhang A, Zhao G, Gao J, Guan Y. Effect of Acrylonitrile-Butadiene-Styrene High-Rubber Powder and Strain Rate on the Morphology and Mechanical Properties of Acrylonitrile-Butadiene-Styrene/Poly (Methyl Methacrylate) Blends Polymer-Plastics Technology and Engineering. 49: 296-304. DOI: 10.1080/03602550903413979 |
0.343 |
|
2010 |
Zhang C, Leotoing L, Zhao G, Guines D, Ragneau E. A methodology for evaluating sheet formability combining the tensile test with the M–K model Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 480-485. DOI: 10.1016/J.Msea.2010.09.001 |
0.334 |
|
2010 |
Wang G, Zhao G, Li H, Guan Y. Research of thermal response simulation and mold structure optimization for rapid heat cycle molding processes, respectively, with steam heating and electric heating Materials & Design. 31: 382-395. DOI: 10.1016/J.Matdes.2009.06.010 |
0.338 |
|
2010 |
Mu Y, Zhao G, Wu X, Zhang C. An optimization strategy for die design in the low-density polyethylene annular extrusion process based on FES/BPNN/NSGA-II The International Journal of Advanced Manufacturing Technology. 50: 517-532. DOI: 10.1007/S00170-010-2556-Z |
0.356 |
|
2010 |
Zhang A, Zhao G, Guan Y, Chen G. Study on Mechanical and Flow Properties of Acrylonitrile-butadiene-styrene/Poly(methyl methacrylate)/Nano-Calcium Carbonate Composites Polymer Composites. 31: 1593-1602. DOI: 10.1002/Pc.20947 |
0.316 |
|
2010 |
Li X, Zhao G, Guan Y, Ma M. Multi‐objective optimization of heating channels for rapid heating cycle injection mold using Pareto‐based genetic algorithm Polymers For Advanced Technologies. 21: 669-678. DOI: 10.1002/Pat.1488 |
0.32 |
|
2009 |
Dean SW, Li H, Zhao G, He L. Finite Element Method Numerical Simulation of the Carburizing Process Journal of Astm International. 6: 101748. DOI: 10.1520/Jai101748 |
0.304 |
|
2009 |
Wang G, Zhao G, Li H, Guan Y. Research on a New Variotherm Injection Molding Technology and its Application on the Molding of a Large LCD Panel Polymer-Plastics Technology and Engineering. 48: 671-681. DOI: 10.1080/03602550902824549 |
0.36 |
|
2009 |
Li X, Zhao G, Guan Y, Ma M. Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm Materials & Design. 30: 4317-4323. DOI: 10.1016/J.Matdes.2009.04.016 |
0.336 |
|
2009 |
Li H, Zhao G, He L, Mo Y. Solution of non-linear thermal transient problems by a new adaptive time-step method in quenching process Applied Mathematical Modelling. 33: 329-342. DOI: 10.1016/J.Apm.2007.11.004 |
0.365 |
|
2009 |
Li X, Zhao G, Guan Y, Li H. Research on thermal stress, deformation, and fatigue lifetime of the rapid heating cycle injection mold. The International Journal of Advanced Manufacturing Technology. 45: 261-275. DOI: 10.1007/S00170-009-1969-Z |
0.379 |
|
2009 |
Yanjin G, Xin W, Zhao G, Ping L. A nonlinear numerical analysis for metal-forming process using the rigid-(visco)plastic element-free Galerkin method The International Journal of Advanced Manufacturing Technology. 42: 83-92. DOI: 10.1007/S00170-008-1585-3 |
0.368 |
|
2008 |
Lu P, Zhao G, Guan Y, Wu X. Bulk metal forming process simulation based on rigid-plastic/viscoplastic element free Galerkin method Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 479: 197-212. DOI: 10.1016/J.Msea.2007.06.059 |
0.361 |
|
2008 |
Li H, Zhao G, He L. Finite element method based simulation of stress–strain field in the quenching process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 478: 276-290. DOI: 10.1016/J.Msea.2007.05.101 |
0.365 |
|
2008 |
Xu S, Zhao G, Ren X, Guan Y. Numerical investigation of aluminum deformation behavior in three-dimensional continuous confined strip shearing process Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 476: 281-289. DOI: 10.1016/J.Msea.2007.05.003 |
0.401 |
|
2008 |
Li H, Zhao G, He L, Mu Y. High-speed data acquisition of the cooling curves and evaluation of heat transfer coefficient in quenching process Measurement. 41: 676-686. DOI: 10.1016/J.Measurement.2007.10.003 |
0.329 |
|
2008 |
Lou S, Zhao G, Wang R, Wu X. Modeling of aluminum alloy profile extrusion process using finite volume method Journal of Materials Processing Technology. 206: 481-490. DOI: 10.1016/J.Jmatprotec.2007.12.084 |
0.413 |
|
2008 |
Wu L, Jia Y, Sun S, Zhang G, Zhao G, An L. Numerical Simulation of Reactive Extrusion Processes for Activated Anionic Polymerization Journal of Materials Processing Technology. 199: 56-63. DOI: 10.1016/J.Jmatprotec.2007.07.026 |
0.323 |
|
2007 |
Wu L, Jia Y, Sun S, Zhang G, Zhao G, An L. Study on reactive extrusion processes of block copolymer Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 454: 221-226. DOI: 10.1016/J.Msea.2006.11.154 |
0.347 |
|
2007 |
Guan Y, Zhao G, Wu X, Lu P. Massive metal forming process simulation based on rigid/visco-plastic element-free Galerkin method Journal of Materials Processing Technology. 187: 412-416. DOI: 10.1016/J.Jmatprotec.2006.11.075 |
0.356 |
|
2007 |
Xu S, Zhao G, Ma X, Ren G. Finite element analysis and optimization of equal channel angular pressing for producing ultra-fine grained materials Journal of Materials Processing Technology. 184: 209-216. DOI: 10.1016/J.Jmatprotec.2006.11.025 |
0.37 |
|
2007 |
Zhang H, Zhao G, Ma X. Adaptive generation of hexahedral element mesh using an improved grid-based method Computer-Aided Design. 39: 914-928. DOI: 10.1016/J.Cad.2007.05.016 |
0.313 |
|
2007 |
Jia Y, Zhang G, Wu L, Sun S, Zhao G, An L. Analysis of chemical calorific effect during reactive extrusion processes for free radical polymerization Polymer International. 56: 1553-1557. DOI: 10.1002/Pi.2303 |
0.327 |
|
2007 |
Jia Y, Zhang G, Wu L, Sun S, Zhao G, An L. Computer simulation of reactive extrusion processes for free radical polymerization Polymer Engineering and Science. 47: 667-674. DOI: 10.1002/Pen.20739 |
0.325 |
|
2007 |
Mu Y, Zhao G, Qin S, Chen A. Numerical simulation of three‐dimensional polymer extrusion flow with differential viscoelastic model Polymers For Advanced Technologies. 18: 1004-1014. DOI: 10.1002/Pat.959 |
0.361 |
|
2007 |
Zhang G, Jia Y, Sun S, Wu L, Zhao G, An L. Investigation of the gel effect in reactive extrusion processes for free radical polymerization Macromolecular Reaction Engineering. 1: 321-330. DOI: 10.1002/Mren.200600030 |
0.32 |
|
2007 |
Wu L, Jia Y, Sun S, Zhang G, Zhao G, An L. Numerical simulation of reactive extrusion processes of PA6 Journal of Applied Polymer Science. 103: 2331-2336. DOI: 10.1002/App.24815 |
0.348 |
|
2006 |
Zhang M, Jia Y, Sun S, Zhao G. Three-Dimensional Nonisothermal Simulation of Multi-Layer Extrusion Processes of Polymer Melts Polymer-Plastics Technology and Engineering. 45: 1257-1262. DOI: 10.1080/03602550600916993 |
0.335 |
|
2006 |
Zhao G, Xu S, Luan Y, Guan Y, Lun N, Ren X. Grain refinement mechanism analysis and experimental investigation of equal channel angular pressing for producing pure aluminum ultra-fine grained materials Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 437: 281-292. DOI: 10.1016/J.Msea.2006.07.138 |
0.404 |
|
2006 |
Xu S, Zhao G, Luan Y, Guan Y. Numerical studies on processing routes and deformation mechanism of multi-pass equal channel angular pressing processes Journal of Materials Processing Technology. 176: 251-259. DOI: 10.1016/J.Jmatprotec.2006.03.167 |
0.349 |
|
2005 |
Guan Y, Sun S, Zhao G, Luan Y. Influence of material properties on the laser-forming process of sheet metals Journal of Materials Processing Technology. 167: 124-131. DOI: 10.1016/J.Jmatprotec.2004.10.003 |
0.377 |
|
2004 |
Zhao G, Ma X, Zhao X, Grandhi RV. Studies on optimization of metal forming processes using sensitivity analysis methods Journal of Materials Processing Technology. 147: 217-228. DOI: 10.1016/J.Jmatprotec.2003.12.018 |
0.327 |
|
2003 |
Jia Y, Sun S, Xue S, Liu L, Zhao G. Numerical Simulation of Moldable Silicone Rubber Vulcanization Process Based on Thermal Coupling Analysis Polymer-Plastics Technology and Engineering. 42: 883-898. DOI: 10.1081/Ppt-120025001 |
0.337 |
|
2003 |
Jia Y, Sun S, Liu L, Xue S, Zhao G. Investigation of computer-aided engineering of silicone rubber vulcanizing (I)—vulcanization degree calculation based on temperature field analysis Polymer. 44: 319-326. DOI: 10.1016/S0032-3861(02)00704-8 |
0.317 |
|
2002 |
Zhao X, Zhao G, Wang G, Wang T. Preform die shape design for uniformity of deformation in forging based on preform sensitivity analysis Journal of Materials Processing Technology. 128: 25-32. DOI: 10.1016/S0924-0136(02)00054-7 |
0.333 |
|
2002 |
Jia Y, Sun S, Xue S, Liu L, Zhao G. Investigation of computer-aided engineering of silicone rubber vulcanizing (II)—finite element simulation of unsteady vulcanization field Polymer. 43: 7515-7520. DOI: 10.1016/S0032-3861(02)00705-X |
0.306 |
|
1997 |
Zhao G, Wright E, Grandhi RV. Sensitivity analysis based preform die shape design for net-shape forging International Journal of Machine Tools & Manufacture. 37: 1251-1271. DOI: 10.1016/S0890-6955(96)00087-9 |
0.337 |
|
1996 |
Zhao G, Wright E, Grandhi RV. Computer aided preform design in forging using the inverse die contact tracking method International Journal of Machine Tools & Manufacture. 36: 755-769. DOI: 10.1016/0890-6955(96)00123-X |
0.357 |
|
1995 |
Zhao G, Wright E, Grandhi RV. Forging preform design with shape complexity control in simulating backward deformation International Journal of Machine Tools & Manufacture. 35: 1225-1239. DOI: 10.1016/0890-6955(94)00117-3 |
0.333 |
|
Show low-probability matches. |