Year |
Citation |
Score |
2020 |
Nahata S, Kota N, Ozdoganlar OB. Micromachining of coarse-grained aluminum including crystallographic effects Journal of Manufacturing Processes. 57: 600-613. DOI: 10.1016/J.Jmapro.2020.06.034 |
0.362 |
|
2020 |
Shekhar S, Nahata S, Ozdoganlar OB. The effect of spindle dynamics on tool-tip radial throw in micromachining Journal of Manufacturing Processes. 56: 1397-1403. DOI: 10.1016/J.Jmapro.2020.04.036 |
0.477 |
|
2019 |
Chen W, Korkmaz E, Gozen BA, Ozdoganlar OB. Measurement of high-bandwidth nanonewton forces in a low-compliance configuration Sensors and Actuators a-Physical. 299: 111474. DOI: 10.1016/J.Sna.2019.06.054 |
0.319 |
|
2019 |
Nahata S, Ozdoganlar OB. Feasibility of Metal Additive Manufacturing for Fabricating Custom Surgical Instrumentation for Hip and Knee Implants Procedia Manufacturing. 34: 772-779. DOI: 10.1016/J.Promfg.2019.06.207 |
0.355 |
|
2019 |
Bediz B, Ozdoganlar OB. Rotational dynamics of micro-scale cutting tools Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 60: 1-11. DOI: 10.1016/J.Precisioneng.2019.07.004 |
0.362 |
|
2019 |
Onler R, Korkmaz E, Kate K, Chinn RE, Atre SV, Ozdoganlar OB. Green micromachining of ceramics using tungsten carbide micro-endmills Journal of Materials Processing Technology. 267: 268-279. DOI: 10.1016/J.Jmatprotec.2018.12.009 |
0.325 |
|
2017 |
Ong XC, Khilwani R, Forssell M, Ozdoganlar OB, Fedder GK. A transfer process to fabricate ultra-compliant neural probes in dissolvable needles Journal of Micromechanics and Microengineering. 27: 035008. DOI: 10.1088/1361-6439/Aa5969 |
0.302 |
|
2017 |
Korkmaz E, Onler R, Ozdoganlar OB. Micromilling of Poly(methyl methacrylate, PMMA) Using Single-Crystal Diamond Tools Procedia Manufacturing. 10: 683-693. DOI: 10.1016/J.Promfg.2017.07.017 |
0.38 |
|
2017 |
Korkmaz E, Gozen BA, Bediz B, Ozdoganlar OB. Accurate measurement of micromachining forces through dynamic compensation of dynamometers Precision Engineering. 49: 365-376. DOI: 10.1016/J.Precisioneng.2017.03.006 |
0.353 |
|
2016 |
Khilwani R, Gilgunn PJ, Kozai TD, Ong XC, Korkmaz E, Gunalan PK, Cui XT, Fedder GK, Ozdoganlar OB. Ultra-miniature ultra-compliant neural probes with dissolvable delivery needles: design, fabrication and characterization. Biomedical Microdevices. 18: 97. PMID 27778225 DOI: 10.1007/S10544-016-0125-4 |
0.707 |
|
2016 |
Chinn RE, Atre SV, Kate KH, Onler R, Ozdoganlar OB. Microstructural Development of Green Micro-Machined, Injection-Molded Silicon Carbide Microscopy and Microanalysis. 22: 1818-1819. DOI: 10.1017/S1431927616009934 |
0.314 |
|
2016 |
Chen W, Korkmaz E, Gozen BA, Ozdoganlar OB. Accurate Measurement of High-Bandwidth Nanomilling Forces Procedia Manufacturing. 5: 170-181. DOI: 10.1016/J.Promfg.2016.08.016 |
0.35 |
|
2016 |
Anandan KP, Ozdoganlar OB. A multi-orientation error separation technique for spindle metrology of miniature ultra-high-speed spindles Precision Engineering. 43: 119-131. DOI: 10.1016/J.Precisioneng.2015.07.002 |
0.765 |
|
2015 |
Korkmaz E, Gozen BA, Bediz B, Ozdoganlar OB. High-frequency Compensation of Dynamic Distortions in Micromachining Force Measurements Procedia Manufacturing. 1: 534-545. DOI: 10.1016/J.Promfg.2015.09.027 |
0.328 |
|
2015 |
Bediz B, Romero L, Ozdoganlar OB. Three dimensional dynamics of rotating structures under mixed boundary conditions Journal of Sound and Vibration. 358: 176-191. DOI: 10.1016/J.Jsv.2015.08.015 |
0.33 |
|
2014 |
Kozai TD, Gugel Z, Li X, Gilgunn PJ, Khilwani R, Ozdoganlar OB, Fedder GK, Weber DJ, Cui XT. Chronic tissue response to carboxymethyl cellulose based dissolvable insertion needle for ultra-small neural probes. Biomaterials. 35: 9255-68. PMID 25128375 DOI: 10.1016/J.Biomaterials.2014.07.039 |
0.688 |
|
2014 |
Korkmaz E, Bediz B, Gozen BA, Ozdoganlar OB. Dynamic characterization of multi-axis dynamometers Precision Engineering. 38: 148-161. DOI: 10.1016/J.Precisioneng.2013.08.006 |
0.348 |
|
2014 |
Bediz B, Korkmaz E, Ozdoganlar OB. An Impact Excitation System for Repeatable, High-Bandwidth Modal Testing of Miniature Structures Conference Proceedings of the Society For Experimental Mechanics Series. 45: 249-257. DOI: 10.1016/J.Jsv.2014.02.022 |
0.311 |
|
2014 |
Bediz B, Gozen BA, Korkmaz E, Ozdoganlar OB. Dynamics of ultra-high-speed (UHS) spindles used for micromachining International Journal of Machine Tools & Manufacture. 87: 27-38. DOI: 10.1016/J.Ijmachtools.2014.07.007 |
0.403 |
|
2013 |
Anandan KP, Ozdoganlar OB. An LDV-based methodology for measuring axial and radial error motions when using miniature ultra-high-speed (UHS) micromachining spindles Precision Engineering. 37: 172-186. DOI: 10.1016/J.Precisioneng.2012.08.001 |
0.77 |
|
2013 |
Anandan KP, Ozdoganlar OB. Analysis of error motions of ultra-high-speed (UHS) micromachining spindles International Journal of Machine Tools and Manufacture. 70: 1-14. DOI: 10.1016/J.Ijmachtools.2013.02.005 |
0.772 |
|
2013 |
Nahata S, Anandan KP, Ozdoganlar OB. LDV-based spindle metrology for ultra-high-speed micromachining spindles Transactions of the North American Manufacturing Research Institution of Sme. 41: 319-324. |
0.739 |
|
2012 |
Lee J, Ozdoganlar OB, Rabin Y. An experimental investigation on thermal exposure during bone drilling. Medical Engineering & Physics. 34: 1510-20. PMID 22483188 DOI: 10.1016/J.Medengphy.2012.03.002 |
0.645 |
|
2012 |
Lee J, Gozen BA, Ozdoganlar OB. Modeling and experimentation of bone drilling forces. Journal of Biomechanics. 45: 1076-83. PMID 22281407 DOI: 10.1016/J.Jbiomech.2011.12.012 |
0.645 |
|
2012 |
Gozen BA, Ozdoganlar OB. Characterization of three-dimensional dynamics of piezo-stack actuators Mechanical Systems and Signal Processing. 31: 268-283. DOI: 10.1016/J.Ymssp.2012.03.021 |
0.361 |
|
2012 |
Anandan KP, Tulsian AS, Donmez A, Ozdoganlar OB. A Technique for measuring radial error motions of ultra-high-speed miniature spindles used for micromachining Precision Engineering. 36: 104-120. DOI: 10.1016/J.Precisioneng.2011.07.014 |
0.772 |
|
2012 |
Gozen BA, Ozdoganlar OB. Design and evaluation of a mechanical nanomanufacturing system for nanomilling Precision Engineering. 36: 19-30. DOI: 10.1016/J.Precisioneng.2011.06.001 |
0.439 |
|
2012 |
Kota N, Ozdoganlar OB. Orthogonal machining of single-crystal and coarse-grained aluminum Journal of Manufacturing Processes. 14: 126-134. DOI: 10.1016/J.Jmapro.2012.01.002 |
0.308 |
|
2011 |
Lee J, Rabin Y, Ozdoganlar OB. A new thermal model for bone drilling with applications to orthopaedic surgery. Medical Engineering & Physics. 33: 1234-44. PMID 21803638 DOI: 10.1016/J.Medengphy.2011.05.014 |
0.636 |
|
2011 |
Lee J, Ozdoganlar OB, Rabin Y. Analysis of heat transfer in bone drilling Asme 2011 Summer Bioengineering Conference, Sbc 2011. 757-758. DOI: 10.1115/SBC2011-53331 |
0.567 |
|
2011 |
Kota N, Rollett AD, Ozdoganlar OB. A Rate-Sensitive Plasticity-Based Model for Machining of fcc Single-Crystals—Part II: Model Calibration and Validation Journal of Manufacturing Science and Engineering. 133. DOI: 10.1115/1.4004135 |
0.335 |
|
2011 |
Kota N, Rollett AD, Ozdoganlar OB. A Rate-Sensitive Plasticity-Based Model for Machining of Face-Centered Cubic Single-Crystals—Part I: Model Development Journal of Manufacturing Science and Engineering. 133. DOI: 10.1115/1.4004134 |
0.338 |
|
2011 |
Filiz S, Ozdoganlar OB. A three-dimensional model for the dynamics of micro-endmills including bending, torsional and axial vibrations Precision Engineering. 35: 24-37. DOI: 10.1016/J.Precisioneng.2010.05.003 |
0.302 |
|
2011 |
Anandan KP, Ozdoganlar OB. Evaluation of tool-grade ceramics for use as precision cutting tools Transactions of the North American Manufacturing Research Institution of Sme. 39: 305-311. |
0.722 |
|
2010 |
Gozen BA, Ozdoganlar OB. A Rotating-Tip-Based Mechanical Nano-Manufacturing Process: Nanomilling. Nanoscale Research Letters. 5: 1403-1407. PMID 20730128 DOI: 10.1007/S11671-010-9653-7 |
0.437 |
|
2010 |
Nain AS, Filiz S, Ozdoganlar OB, Sitti M, Amon C. Note: Aligned deposition and modal characterization of micron and submicron poly(methyl methacyrlate) fiber cantilevers. The Review of Scientific Instruments. 81: 016102. PMID 20113133 DOI: 10.1063/1.3253563 |
0.304 |
|
2010 |
Filiz S, Ozdoganlar OB. A Model for Bending, Torsional, and Axial Vibrations of Micro- and Macro-Drills Including Actual Drill Geometry—Part II: Model Validation and Application Journal of Manufacturing Science and Engineering. 132. DOI: 10.1115/1.4001721 |
0.346 |
|
2010 |
Kota N, Ozdoganlar OB. A model-based analysis of orthogonal cutting for single-crystal FCC metals including crystallographic anisotropy Machining Science and Technology. 14: 102-127. DOI: 10.1080/10910340903586517 |
0.32 |
|
2008 |
Filiz S, Ozdoganlar OB, Romero LA. An analytical model for micro-endmill dynamics Jvc/Journal of Vibration and Control. 14: 1125-1150. DOI: 10.1177/1077546307080245 |
0.334 |
|
2008 |
Filiz S, Ozdoganlar OB. Microendmill dynamics including the actual fluted geometry and setup errors - Part II: Model validation and application Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311201-03112013. DOI: 10.1115/1.2936379 |
0.317 |
|
2008 |
Filiz S, Ozdoganlar OB. Microendmill dynamics including the actual fluted geometry and setup errors - Part I: Model development and numerical solution Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311191-03111910. DOI: 10.1115/1.2917321 |
0.357 |
|
2008 |
Lawson BL, Kota N, Ozdoganlar OB. Effects of crystallography anistropy on orthogonal micromachining of single-crystal aluminum Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311161-03111611. DOI: 10.1115/1.2917268 |
0.332 |
|
2008 |
Anandan KP, Ozdoganlar OB. An experimental study on a mandrel-based diamond polishing configuration Transactions of the North American Manufacturing Research Institution of Sme. 36: 365-372. |
0.715 |
|
2007 |
Filiz S, Conley CM, Wasserman MB, Ozdoganlar OB. An experimental investigation of micro-machinability of copper 101 using tungsten carbide micro-endmills International Journal of Machine Tools and Manufacture. 47: 1088-1100. DOI: 10.1016/J.Ijmachtools.2006.09.024 |
0.32 |
|
2005 |
Ozdoganlar OB, Hansche BD, Carne TG. Experimental modal analysis for microelectromechanical systems Experimental Mechanics. 45: 498-506. DOI: 10.1007/Bf02427903 |
0.322 |
|
2003 |
Mellinger JC, Ozdoganlar OB, DeVor RE, Kapoor SG. Modeling chip-evacuation forces in drilling for various flute geometries Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 405-415. DOI: 10.1115/1.1578671 |
0.333 |
|
2003 |
Gupta K, Ozdoganlar OB, Kapoor SG, DeVor RE. Modeling and prediction of hole profile in drilling, part 2: modeling hole profile Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 14-20. DOI: 10.1115/1.1536933 |
0.337 |
|
2003 |
Gupta K, Ozdoganlar OB, Kapoor SG, DeVor RE. Modeling and prediction of hole profile in drilling, Part 1: modeling drill dynamics in the presence of drill alignment errors Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 6-13. DOI: 10.1115/1.1536932 |
0.379 |
|
2002 |
Reddy RG, Ozdoganlar OB, Kapoor SG, DeVor RE, Liu X. A stability solution for the axial contour-turning process Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 581-587. DOI: 10.1115/1.1480415 |
0.387 |
|
2002 |
Mellinger JC, Ozdoganlar OB, DeVor RE, Kapoor SG. Modeling chip-evacuation forces and prediction of chip-clogging in drilling Journal of Manufacturing Science and Engineering, Transactions of the Asme. 124: 605-614. DOI: 10.1115/1.1473146 |
0.311 |
|
2000 |
Ozdoganlar OB, Endres WJ. An analytical representation of chip area for corner-radiused tools under both depth-of-cut and feed variations Journal of Manufacturing Science and Engineering, Transactions of the Asme. 122: 660-665. DOI: 10.1115/1.1286470 |
0.342 |
|
Show low-probability matches. |