Javad Mostaghimi - Publications

Affiliations: 
Mechanical and Industrial Engineering University of Toronto, Toronto, ON, Canada 
Area:
Mechanical Engineering
Website:
https://www.mie.utoronto.ca/faculty_staff/mostaghimi/

224 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2021 Xu P, Meng G, Pershin L, Mostaghimi J, Coyle TW. Control of the hydrophobicity of rare earth oxide coatings deposited by solution precursor plasma spray by hydrocarbon adsorption Journal of Materials Science & Technology. 62: 107-118. DOI: 10.1016/J.Jmst.2020.04.044  0.434
2020 Alavi S, Guo X, Javid SM, Ebrahimi A, Mostaghimi J. High-Sensitivity and High-Speed Single-Particle Inductively Coupled Plasma Spectrometry with the Conical Torch. Analytical Chemistry. PMID 32791823 DOI: 10.1021/Acs.Analchem.0C01903  0.302
2020 Xu P, Coyle TW, Pershin L, Mostaghimi J. From lotus effect to petal effect: Tuning the water adhesion of non-wetting rare earth oxide coatings Journal of the European Ceramic Society. 40: 1692-1702. DOI: 10.1016/J.Jeurceramsoc.2019.12.003  0.462
2020 Dalir E, Dolatabadi A, Mostaghimi J. Modeling the effect of droplet shape and solid concentration on the suspension plasma spraying International Journal of Heat and Mass Transfer. 161: 120317. DOI: 10.1016/J.Ijheatmasstransfer.2020.120317  0.447
2020 Javid SM, Moreau C, Mostaghimi J. A three-dimensional analysis of drying of a single suspension droplet in high rate evaporation processes International Journal of Heat and Mass Transfer. 157: 119791. DOI: 10.1016/J.Ijheatmasstransfer.2020.119791  0.382
2020 Zhang Y, Liu J, Luan T, Gao Y, Mostaghimi J. Prediction of flow characteristics in fibrous porous medium using a novel modeling algorithm and lattice Boltzmann method Chemical Engineering Science. 221: 115647. DOI: 10.1016/J.Ces.2020.115647  0.305
2020 Jia D, Liu Y, Yi P, Zhan X, Ma J, Mostaghimi J. Splat formation mechanism of droplet-filled cold-textured groove during plasma spraying Applied Thermal Engineering. 173: 115239. DOI: 10.1016/J.Applthermaleng.2020.115239  0.486
2019 Al-Athel KS, Marraiki N, Arif AFM, Akhtar SS, Mostaghimi J, Ibrahim M. Effect of Ni and Zn Elements on the Microstructure and Antibacterial Properties of Cu Coatings Journal of Engineering Materials and Technology. 142. DOI: 10.1115/1.4044265  0.351
2019 Guo X, Alavi S, Mostaghimi J. Analytical performance of the Conical torch in axially viewed inductively coupled plasma optical emission spectroscopy Journal of Analytical Atomic Spectrometry. 34: 2126-2135. DOI: 10.1039/C9Ja00264B  0.329
2019 Xu P, Coyle TW, Pershin L, Mostaghimi J. Understanding the correlations between the mechanical robustness, coating structures and surface composition for highly-/super-hydrophobic ceramic coatings Surface & Coatings Technology. 378: 124929. DOI: 10.1016/J.Surfcoat.2019.124929  0.441
2019 Yi P, Jia D, Zhan X, Xu P, Mostaghimi J. Coating solidification mechanism during plasma-sprayed filling the laser textured grooves International Journal of Heat and Mass Transfer. 142: 118451. DOI: 10.1016/J.Ijheatmasstransfer.2019.118451  0.502
2019 Javid SM, Moreau C, Mostaghimi J. Numerical Analysis of Buckling of a Single Suspension Droplet Journal of Thermal Spray Technology. 29: 344-357. DOI: 10.1007/S11666-019-00962-1  0.363
2019 Dalir E, Dolatabadi A, Mostaghimi J. Modeling of Suspension Plasma Spraying Process Including Arc Movement Inside the Torch Journal of Thermal Spray Technology. 28: 1105-1125. DOI: 10.1007/S11666-019-00883-Z  0.474
2019 Abubakar AA, Arif AFM, Akhtar SS, Mostaghimi J. Splats Formation, Interaction and Residual Stress Evolution in Thermal Spray Coating Using a Hybrid Computational Model Journal of Thermal Spray Technology. 28: 359-377. DOI: 10.1007/S11666-019-00828-6  0.367
2019 Alavi S, Mostaghimi J. A Novel ICP Torch with Conical Geometry Plasma Chemistry and Plasma Processing. 39: 359-376. DOI: 10.1007/S11090-018-9948-5  0.366
2018 Xu P, Coyle TW, Pershin L, Mostaghimi J. Superhydrophobic ceramic coating: Fabrication by solution precursor plasma spray and investigation of wetting behavior. Journal of Colloid and Interface Science. 523: 35-44. PMID 29605739 DOI: 10.1016/J.Jcis.2018.03.018  0.426
2018 Xu P, Pershin L, Mostaghimi J, Coyle TW. Efficient one-step fabrication of ceramic superhydrophobic coatings by solution precursor plasma spray Materials Letters. 211: 24-27. DOI: 10.1016/J.Matlet.2017.09.077  0.425
2018 Xu P, Coyle TW, Pershin L, Mostaghimi J. Fabrication of micro-/nano-structured superhydrophobic ceramic coating with reversible wettability via a novel solution precursor vacuum plasma spray process Materials & Design. 160: 974-984. DOI: 10.1016/J.Matdes.2018.10.015  0.47
2018 Sivakumar S, Shanmugavelayutham G, Yugeswaran S, Mostaghimi J. Influence of water vapour on structural and thermal conductivity of post-heat treated plasma sprayed LZ and YSZ coatings Journal of Alloys and Compounds. 740: 212-221. DOI: 10.1016/J.Jallcom.2018.01.056  0.405
2018 Yi P, Mostaghimi J, Pershin L, Xu P, Zhan X, Jia D, Yi H, Liu Y. Effects of laser surface remelting on the molten salt corrosion resistance of yttria-stabilized zirconia coatings Ceramics International. 44: 22645-22655. DOI: 10.1016/J.Ceramint.2018.09.041  0.399
2018 Xin Q, Su X, Alavi S, Wang B, Mostaghimi J. Effects of conical nozzle and its geometry on properties of an inductively coupled plasma jet used for optical fabrication Applied Thermal Engineering. 128: 785-794. DOI: 10.1016/J.Applthermaleng.2017.07.131  0.388
2018 Xu P, Coyle TW, Pershin L, Mostaghimi J. Fabrication of Superhydrophobic Ceramic Coatings via Solution Precursor Plasma Spray Under Atmospheric and Low-Pressure Conditions Journal of Thermal Spray Technology. 28: 242-254. DOI: 10.1007/S11666-018-0814-Z  0.472
2017 Alavi S, Khayamian T, Mostaghimi J. Conical Torch: The Next-Generation Inductively Coupled Plasma Source for Spectrochemical Analysis. Analytical Chemistry. PMID 29268014 DOI: 10.1021/Acs.Analchem.7B04356  0.355
2017 Shafaghi R, Mostaghimi J, Pershin V, Ringuette M. Sporicidal Efficacy of Thermal Sprayed Copper Alloy Coating. Canadian Journal of Microbiology. PMID 28177787 DOI: 10.1139/Cjm-2016-0638  0.388
2017 Dalili A, Esmaeelpanah J, Chandra S, Mostaghimi J. Coalescence And Agglomeration Of Droplets Sprayed On A Substrate Atomization and Sprays. 27: 81-94. DOI: 10.1615/Atomizspr.2016016052  0.396
2017 Hafeez P, Chandra S, Mostaghimi J. Heat Transfer During High Temperature Gas Flow Through Metal Foam Heat Exchangers Journal of Heat Transfer. 139. DOI: 10.1115/1.4037082  0.342
2017 Farrokhpanah A, Bussmann M, Mostaghimi J. New smoothed particle hydrodynamics (SPH) formulation for modeling heat conduction with solidification and melting Numerical Heat Transfer Part B-Fundamentals. 71: 299-312. DOI: 10.1080/10407790.2017.1293972  0.316
2017 Ataie A, Mostaghimi J, Pershin L, Xu P. Fabrication of nanostructured cobalt ferrite coatings using suspension plasma spraying (SPS) technique Surface and Coatings Technology. 328: 451-461. DOI: 10.1016/J.Surfcoat.2017.09.003  0.437
2017 Sivakumar S, Praveen K, Shanmugavelayutham G, Yugeswaran S, Mostaghimi J. Thermo-physical behavior of atmospheric plasma sprayed high porosity lanthanum zirconate coatings Surface and Coatings Technology. 326: 173-182. DOI: 10.1016/J.Surfcoat.2017.07.054  0.441
2017 Davoodi Jamaloei A, Salimijazi HR, Edris H, Mostaghimi J. Study of TLP bonding of Ti-6Al-4V alloy produced by vacuum plasma spray forming and forging Materials & Design. 121: 355-366. DOI: 10.1016/J.Matdes.2017.02.046  0.311
2017 Al-Athel KS, Aly SP, Arif AFM, Mostaghimi J. 3D modeling and analysis of the thermo-mechanical behavior of metal foam heat sinks International Journal of Thermal Sciences. 116: 199-213. DOI: 10.1016/J.Ijthermalsci.2017.02.015  0.326
2017 Naterer G, Suppiah S, Rosen M, Gabriel K, Dincer I, Jianu O, Wang Z, Easton E, Ikeda B, Rizvi G, Pioro I, Pope K, Mostaghimi J, Lvov S. Advances in unit operations and materials for the Cu Cl cycle of hydrogen production International Journal of Hydrogen Energy. 42: 15708-15723. DOI: 10.1016/J.Ijhydene.2017.03.133  0.309
2017 Safaei H, Emami MD, Jazi HS, Mostaghimi J. Application of Compressible Volume of Fluid Model in Simulating the Impact and Solidification of Hollow Spherical ZrO 2 Droplet on a Surface Journal of Thermal Spray Technology. 26: 1959-1981. DOI: 10.1007/S11666-017-0632-8  0.43
2017 Abubakar AA, Arif AFM, Al-Athel KS, Akhtar SS, Mostaghimi J. Modeling Residual Stress Development in Thermal Spray Coatings: Current Status and Way Forward Journal of Thermal Spray Technology. 26: 1115-1145. DOI: 10.1007/S11666-017-0590-1  0.378
2017 Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, ... ... Mostaghimi J, et al. Erratum to: The 2016 Thermal Spray Roadmap Journal of Thermal Spray Technology. 26: 985-986. DOI: 10.1007/S11666-017-0560-7  0.321
2017 Farrokhpanah A, Coyle TW, Mostaghimi J. Numerical Study of Suspension Plasma Spraying Journal of Thermal Spray Technology. 26: 12-36. DOI: 10.1007/S11666-016-0502-9  0.442
2016 Cai Y, Coyle TW, Azimi G, Mostaghimi J. Superhydrophobic Ceramic Coatings by Solution Precursor Plasma Spray. Scientific Reports. 6: 24670. PMID 27091306 DOI: 10.1038/Srep24670  0.489
2016 Nejad M, Shafaghi R, Pershin L, Mostaghimi J, Cooper P. Thermal Spray Coating: A New Way of Protecting Wood Bioresources. 12. DOI: 10.15376/Biores.12.1.143-156  0.389
2016 Jafari M, Mostaghimi J, Monajatizadeh H, Rafiei M. Microstructure evaluation of CO-222/SiC coating produced by the plasma spraying method Surface Engineering. 34: 220-225. DOI: 10.1080/02670844.2016.1259731  0.437
2016 Salavati S, Coyle TW, Mostaghimi J. Twin wire arc spray process modification for production of porous metallic coatings Surface and Coatings Technology. 286: 16-24. DOI: 10.1016/J.Surfcoat.2015.12.004  0.49
2016 Dalili A, Chandra S, Mostaghimi J, Fan HTC, Simmer JC. Bubble entrapment and escape from sprayed paint films Progress in Organic Coatings. 97: 153-165. DOI: 10.1016/J.Porgcoat.2016.04.004  0.369
2016 Aly SP, Arif AFM, Al-Athel KS, Mostaghimi J, Zubair SM. Performance of open pore metal foam heat sinks fabricated with thermally sprayed interface Applied Thermal Engineering. 105: 411-424. DOI: 10.1016/J.Applthermaleng.2016.03.012  0.355
2016 Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, ... ... Mostaghimi J, et al. The 2016 Thermal Spray Roadmap Journal of Thermal Spray Technology. 25: 1376-1440. DOI: 10.1007/S11666-016-0473-X  0.321
2016 Hafeez P, Yugeswaran S, Chandra S, Mostaghimi J, Coyle TW. Fabrication of High-Temperature Heat Exchangers by Plasma Spraying Exterior Skins on Nickel Foams Journal of Thermal Spray Technology. 25: 1056-1067. DOI: 10.1007/S11666-016-0413-9  0.355
2016 Salavati S, Coyle TW, Mostaghimi J. The Effect of Heat Treatment on Mechanical Properties of Thermally Sprayed Sandwich Structure Beams Journal of Thermal Spray Technology. 25: 105-112. DOI: 10.1007/S11666-015-0304-5  0.323
2015 Adán C, Marugán J, van Grieken R, Chien K, Pershin L, Coyle T, Mostaghimi J. Effect of Liquid Feed-Stock Composition on the Morphology of Titanium Dioxide Films Deposited by Thermal Plasma Spray. Journal of Nanoscience and Nanotechnology. 15: 6651-62. PMID 26716224 DOI: 10.1166/Jnn.2015.10874  0.382
2015 Farrokhpanah A, Samareh B, Mostaghimi J, Abraham J. Applying contact angle to a two-dimensional multiphase smoothed particle hydrodynamics model Journal of Fluids Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4028877  0.339
2015 Abubakar AA, Akhtar SS, Arif AFM, Mostaghimi J. The effect of porosity on the hot corrosion failure of thermal barrier coatings Modelling and Simulation in Materials Science and Engineering. 23. DOI: 10.1088/0965-0393/23/7/075001  0.425
2015 Kazemipour M, Salimijazi H, Saidi A, Saatchi A, Mostaghimi J, Pershin L, Aref Arjmand A. The electrochemical hydrogen storage properties of Ti0.72Zr0.28Mn1.6V0.4 alloy synthesized by vacuum plasma spraying and vacuum copper boat induction melting: A comparative study International Journal of Hydrogen Energy. 40: 15569-15577. DOI: 10.1016/J.Ijhydene.2015.09.081  0.334
2015 Saranjam N, Chandra S, Mostaghimi J, Fan H, Simmer J. Orange peel formation due to surface tension-driven flows within drying paint films Journal of Coatings Technology Research. DOI: 10.1007/S11998-015-9752-6  0.34
2015 Salavati S, Coyle TW, Mostaghimi J. Optimization of Grit-Blasting Process Parameters for Production of Dense Coatings on Open Pores Metallic Foam Substrates Using Statistical Methods Journal of Thermal Spray Technology. 24: 1246-1255. DOI: 10.1007/S11666-015-0291-6  0.483
2015 Mostaghimi J, Boulos MI. Thermal Plasma Sources: How Well are They Adopted to Process Needs? Plasma Chemistry and Plasma Processing. 35: 421-436. DOI: 10.1007/S11090-015-9616-Y  0.363
2015 Ardakani ES, Mostaghimi J. Numerical study of the arc fluctuations in DC plasma torch Proceedings of the International Thermal Spray Conference. 2: 836-840.  0.38
2015 Farrokhpanah A, Naffrechoux J, Pershin L, Mostaghimi J. Investigation of flow parameters in wire arc thermal spraying using CFD simulation Proceedings of the International Thermal Spray Conference. 1: 538-543.  0.307
2014 Dalili A, Chandra S, Mostaghimi J, Fan HT, Simmer JC. Formation of liquid sheets by deposition of droplets on a surface. Journal of Colloid and Interface Science. 418: 292-9. PMID 24461848 DOI: 10.1016/J.Jcis.2013.12.033  0.384
2014 Farrokhpanah A, Mostaghimi J. Application of multiphase particle methods in atomization and breakup regimes of liquid jets American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1. DOI: 10.1115/Fedsm2014-21681  0.334
2014 Saranjam N, Chandra S, Mostaghimi J. Surface Tension-Driven Flows within Thin Drying Paint Films Journal of Heat Transfer-Transactions of the Asme. 136: 80912. DOI: 10.1115/1.4027530  0.301
2014 Samareh B, Mostaghimi J, Moreau C. Thermocapillary migration of a deformable droplet International Journal of Heat and Mass Transfer. 73: 616-626. DOI: 10.1016/J.Ijheatmasstransfer.2014.02.022  0.377
2014 Salavati S, Pershin L, Coyle TW, Mostaghimi J. Effect of Porosity Content of Arc-Sprayed Alloy 625 Skins on the Flexural Behavior of Nickel Foam Core Sandwich Structures Journal of Thermal Spray Technology. 24: 215-221. DOI: 10.1007/S11666-014-0177-Z  0.41
2014 Rezaey R, Salavati S, Pershin L, Coyle T, Chandra S, Mostaghimi J. Erratum to: Fabrication of Wire Mesh Heat Exchangers for Waste Heat Recovery Using Wire-Arc Spraying Journal of Thermal Spray Technology. 23: 755-755. DOI: 10.1007/S11666-014-0073-6  0.31
2014 Rezaey R, Salavati S, Pershin L, Coyle T, Chandra S, Mostaghimi J. Fabrication of wire mesh heat exchangers for waste heat recovery using wire-arc spraying Journal of Thermal Spray Technology. 23: 609-615. DOI: 10.1007/S11666-014-0058-5  0.365
2014 Salimijazi HR, Mousavi ZA, Golozar MA, Mostaghimi J, Coyle T. Kinetic study of the solid-state transformation of vacuum-plasma-sprayed Ti-6Al-4V Alloy Journal of Thermal Spray Technology. 23: 31-39. DOI: 10.1007/S11666-013-0025-6  0.319
2014 Shan YG, Shen CH, Jia LB, Mostaghimi J. Modeling of two-phase flow and heat transfer in low-temperature oxygen-fuel spray process Journal of Thermal Spray Technology. 23: 14-20. DOI: 10.1007/S11666-013-0012-Y  0.364
2013 Pershin L, Mitrasinovic A, Mostaghimi J. Treatment of refractory powders by a novel, high enthalpy dc plasma Journal of Physics D: Applied Physics. 46. DOI: 10.1088/0022-3727/46/22/224019  0.353
2013 Murphy AB, Colombo V, Mostaghimi J. Arc welding, plasma cutting and plasma spraying Journal of Physics D: Applied Physics. 46. DOI: 10.1088/0022-3727/46/22/220301  0.367
2013 Sharifahmadian O, Salimijazi HR, Fathi MH, Mostaghimi J, Pershin L. Relationship between surface properties and antibacterial behavior of wire arc spray copper coatings Surface and Coatings Technology. 233: 74-79. DOI: 10.1016/J.Surfcoat.2013.01.060  0.422
2013 Shahverdi A, Soucy G, Simard B, Mostaghimi J. Effect of ammonia gas addition to the synthesis environment of single-walled carbon nanotubes on their surface chemistry Chemical Engineering Journal. 230: 80-92. DOI: 10.1016/J.Cej.2013.06.062  0.369
2013 Sharifahmadian O, Salimijazi HR, Fathi MH, Mostaghimi J, Pershin L. Study of the antibacterial behavior of wire Arc sprayed copper coatings Journal of Thermal Spray Technology. 22: 371-379. DOI: 10.1007/S11666-012-9842-2  0.415
2013 Salavati S, Rezaey R, Pershin L, Coyle TW, Mostaghimi J. Development of high density twin wire arc sprayed coatings on metallic foam substrates Proceedings of the International Thermal Spray Conference. 345-350.  0.361
2012 Esmaeelpanah J, Dalili A, Chandra S, Mostaghimi J, Fan HC, Kuo H. Interactions between high-viscosity droplets deposited on a surface: Experiments and simulations American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fedsm. 1: 599-603. DOI: 10.1115/FEDSM2012-72068  0.314
2012 Abedi Esfahani E, Salimijazi H, Golozar MA, Mostaghimi J, Pershin L. Study of corrosion behavior of Arc sprayed aluminum coating on mild steel Journal of Thermal Spray Technology. 21: 1195-1202. DOI: 10.1007/S11666-012-9810-X  0.39
2012 Alavi S, Passandideh-Fard M, Mostaghimi J. Simulation of semi-molten particle impacts including heat transfer and phase change Journal of Thermal Spray Technology. 21: 1278-1293. DOI: 10.1007/S11666-012-9804-8  0.407
2012 Salimijazi H, Hosseini M, Mostaghimi J, Pershin L, Coyle TW, Samadi H, Shafyei A. Plasma sprayed coating using mullite and mixed alumina/silica powders Journal of Thermal Spray Technology. 21: 825-830. DOI: 10.1007/S11666-012-9766-X  0.453
2012 Saeidfar M, Salimijazi HR, Emadi R, Mostaghimi J, Pershin L, Coyle TW. Characterization of yttria coatings synthesized by conventional DC plasma spray and a novel plasma torch Proceedings of the International Thermal Spray Conference. 864-866.  0.337
2011 Arabzadeh Esfarjani S, Mostaghimi J, Kim KS, Shahverdi A, Soucy G. Radio frequency thermal plasma: The cutting edge technology in production of single-walled carbon nanotubes Journal of Thermal Science and Technology. 6: 307-322. DOI: 10.1299/Jtst.6.307  0.719
2011 Moradian A, Mostaghimi J. Effects of injection angle on the measurement of surface tension coefficient by drop weight method Physics and Chemistry of Liquids. 49: 32-51. DOI: 10.1080/00319100903012387  0.312
2011 Lin E, Parizi HB, Pourmousa A, Chandra S, Mostaghimi J. Coating the inner surfaces of pipes with high-viscosity epoxy in annular flow Journal of Coatings Technology Research. 8: 697-706. DOI: 10.1007/S11998-011-9361-Y  0.456
2011 Mitrasinovic A, Pershin L, Wen JZ, Mostaghimi J. Recovery of Cu and valuable metals from E-waste using thermal plasma treatment Jom. 63: 24-28. DOI: 10.1007/S11837-011-0132-0  0.351
2011 Esfarjani SA, Dworkin SB, Mostaghimi J, Kim KS, Simard B, Shahverdi A, Soucy G. CFD simulation of Single-Walled Carbon Nanotube growth in an RF induction thermal plasma process 42nd Aiaa Plasmadynamics and Lasers Conference 0.305
2010 Marr M, Wallace JS, Memme S, Chandra S, Pershin L, Mostaghimi J. An investigation of metal and ceramic thermal barrier coatings in a spark-ignition engine Sae International Journal of Engines. 3: 115-125. DOI: 10.4271/2010-01-2090  0.347
2010 Moradian A, Mostaghimi J, Kim KS, Soucy G. Modeling large-scale synthesis of single-walled carbon nanotubes by induction thermal plasma High Temperature Material Processes. 14: 45-61. DOI: 10.1615/Hightempmatproc.V14.I1-2.40  0.388
2010 Kashani A, Mostaghimi J. Aerosol characterization of concentric pneumatic nebulizer used in inductively coupled plasma-mass spectrometry(ICP-MS) Atomization and Sprays. 20: 415-433. DOI: 10.1615/Atomizspr.V20.I5.40  0.371
2010 Marr MA, Wallace JS, Pershin L, Chandra S, Mostaghimi J. Preliminary testing of metal-based thermal barrier coating in a spark-ignition engine Journal of Engineering For Gas Turbines and Power. 132. DOI: 10.1115/1.4000298  0.452
2010 Liu H, Azarmi F, Bussmann M, Mostaghimi J, Coyle TW. Experiments and simulation of rapid solidification of air plasma sprayed alloy 625 on stainless steel Surface and Coatings Technology. 204: 1521-1527. DOI: 10.1016/J.Surfcoat.2009.09.079  0.465
2010 Marr MA, Wallace JS, Chandra S, Pershin L, Mostaghimi J. A fast response thermocouple for internal combustion engine surface temperature measurements Experimental Thermal and Fluid Science. 34: 183-189. DOI: 10.1016/J.Expthermflusci.2009.10.008  0.352
2010 Parizi HB, Mostaghimi J, Pershin L, Jazi HS. Analysis of the microstructure of thermal spray coatings: A modeling approach Journal of Thermal Spray Technology. 19: 736-744. DOI: 10.1007/S11666-010-9494-Z  0.484
2010 Saaedi J, Coyle TW, Arabi H, Mirdamadi S, Mostaghimi J. Effects of HVOF process parameters on the properties of Ni-Cr coatings Journal of Thermal Spray Technology. 19: 521-530. DOI: 10.1007/S11666-009-9464-5  0.432
2010 Azarmi F, Coyle TW, Mostaghimi J. Evaluation of the flexural rigidity of sandwich structures using experimentally obtained mechanical properties of the constituents Journal of Thermal Spray Technology. 19: 429-438. DOI: 10.1007/S11666-009-9440-0  0.31
2010 Shan Y, Coyle TW, Mostaghimi J. Modeling the influence of injection modes on the evolution of solution sprays in a plasma jet Journal of Thermal Spray Technology. 19: 248-254. DOI: 10.1007/S11666-009-9434-Y  0.439
2010 Kim KS, Moradian A, Mostaghimi J, Soucy G. Modeling of induction plasma process for fullerene synthesis: Effect of plasma gas composition and operating pressure Plasma Chemistry and Plasma Processing. 30: 91-110. DOI: 10.1007/S11090-009-9211-1  0.36
2009 Shan Y, Wei ZP, Coyle T, Mostaghimi J. Numerical investigation of the influence of injection modes in the solution precursor plasma spraying Proceedings of the International Thermal Spray Conference. 450-455. DOI: 10.1361/cp2009itsc0450  0.323
2009 Jazi HRS, Mostaghimi J, Chandra S, Pershin L, Coyle T. Spray-Formed, Metal-Foam Heat Exchangers for High Temperature Applications Journal of Thermal Science and Engineering Applications. 1. DOI: 10.1115/1.4001049  0.373
2009 Azarmi F, Coyle T, Mostaghimi J. Young's modulus measurement and study of the relationship between mechanical properties and microstructure of air plasma sprayed alloy 625 Surface and Coatings Technology. 203: 1045-1054. DOI: 10.1016/J.Surfcoat.2008.09.035  0.397
2009 Liu H, Bussmann M, Mostaghimi J. A comparison of hyperbolic and parabolic models of phase change of a pure metal International Journal of Heat and Mass Transfer. 52: 1177-1184. DOI: 10.1016/J.Ijheatmasstransfer.2008.08.030  0.355
2009 Liu H, Jazi HRS, Bussmann M, Mostaghimi J. Experiments and modeling of rapid solidification of plasma-sprayed yttria-stabilized zirconia Acta Materialia. 57: 6013-6021. DOI: 10.1016/J.Actamat.2009.08.023  0.492
2009 Kim KS, Moradian A, Mostaghimi J, Alinejad Y, Shahverdi A, Simard B, Soucy G. Synthesis of single-walled carbon nanotubes by induction thermal plasma Nano Research. 2: 800-817. DOI: 10.1007/S12274-009-9085-9  0.355
2009 Wu TCM, Bussmann M, Mostaghimi J. The impact of a partially molten YSZ particle Journal of Thermal Spray Technology. 18: 957-964. DOI: 10.1007/S11666-009-9380-8  0.387
2009 Shinoda K, Raessi M, Mostaghimi J, Yoshida T, Murakami H. Effect of substrate concave pattern on splat formation of yttria-stabilized zirconia in atmospheric plasma spraying Journal of Thermal Spray Technology. 18: 609-618. DOI: 10.1007/S11666-009-9374-6  0.408
2009 Azarmi F, Coyle TW, Mostaghimi J. Flexural properties of sandwich beams consisting of air plasma sprayed alloy 625 and nickel alloy foam Journal of Materials Science. 44: 2836-2843. DOI: 10.1007/S10853-009-3375-1  0.301
2009 Raessi M, Bussmann M, Mostaghimi J. A semi-implicit finite volume implementation of the CSF method for treating surface tension in interfacial flows International Journal For Numerical Methods in Fluids. 59: 1093-1110. DOI: 10.1002/Fld.1857  0.355
2008 Murphy AB, Boulos MI, Colombo V, Fauchais P, Ghedini E, Gleizes A, Mostaghimi J, Proulx P, Schram DC. Advanced thermal plasma modelling High Temperature Material Processes. 12: 255-336. DOI: 10.1615/Hightempmatproc.V12.I3-4.30  0.386
2008 Colombo V, Ghedini E, Mostaghimi J. Three-dimensional modeling of an inductively coupled plasma torch for spectroscopic analysis Ieee Transactions On Plasma Science. 36: 1040-1041. DOI: 10.1109/Tps.2008.924632  0.344
2008 Chen L, Pershin L, Mostaghimi J. A new highly efficient high-power DC plasma torch Ieee Transactions On Plasma Science. 36: 1068-1069. DOI: 10.1109/Tps.2008.924405  0.325
2008 Xue M, Chandra S, Mostaghimi J, Moreau C. A stochastic coating model to predict the microstructure of plasma sprayed zirconia coatings Modelling and Simulation in Materials Science and Engineering. 16. DOI: 10.1088/0965-0393/16/6/065006  0.499
2008 Saaedi J, Coyle TW, Mirdamadi S, Arabi H, Mostaghimi J. Phase formation in a Ni-50Cr HVOF coating Surface and Coatings Technology. 202: 5804-5811. DOI: 10.1016/J.Surfcoat.2008.05.056  0.358
2008 Soltani R, Coyle TW, Mostaghimi J, Lima RS, Moreau C. Thermo-physical properties of plasma sprayed Yttria Stabilized Zirconia Coatings Surface and Coatings Technology. 202: 3954-3959. DOI: 10.1016/J.Surfcoat.2008.02.011  0.45
2008 Roisman IV, Opfer L, Tropea C, Raessi M, Mostaghimi J, Chandra S. Drop impact onto a dry surface: Role of the dynamic contact angle Colloids and Surfaces a: Physicochemical and Engineering Aspects. 322: 183-191. DOI: 10.1016/J.Colsurfa.2008.03.005  0.375
2008 Pershin L, Chen L, Mostaghimi J. Plasma spraying of metal coatings using CO 2-based gas mixtures Journal of Thermal Spray Technology. 17: 608-611. DOI: 10.1007/S11666-008-9265-2  0.425
2008 Liu H, Bussmann M, Mostaghimi J. The effect of undercooling on solidification of YSZ splats Journal of Thermal Spray Technology. 17: 646-654. DOI: 10.1007/S11666-008-9238-5  0.378
2008 Soltani R, Coyle TW, Mostaghimi J. Microstructure and creep behavior of plasma-sprayed Yttria stabilized zirconia thermal barrier coatings Journal of Thermal Spray Technology. 17: 244-253. DOI: 10.1007/S11666-008-9166-4  0.45
2008 Azarmi F, Coyle TW, Mostaghimi J. Optimization of atmospheric plasma spray process parameters using a design of experiment for alloy 625 coatings Journal of Thermal Spray Technology. 17: 144-155. DOI: 10.1007/S11666-007-9142-4  0.482
2008 Moradian A, Mostaghimi J. Measurement of surface tension, viscosity, and density at high temperatures by free-fall drop oscillation Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science. 39: 280-290. DOI: 10.1007/S11663-007-9120-8  0.339
2008 Azarmi F, Saaedi J, Coyle TW, Mostaghimi J. Microstructure characterization of alloy 625 deposited on nickel foam using air plasma spraying Advanced Engineering Materials. 10: 459-465. DOI: 10.1002/Adem.200700196  0.407
2007 Azarmi F, Moradian A, Mostaghimi J, Coyle TW, Pershin L. Microstructure characterization and modeling of splat formation during air plasma spraying for inconel 625 superalloy Materials Science Forum. 539: 1218-1223. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.1218  0.496
2007 Fard MP, Levesque D, Morrison S, Ashgriz N, Mostaghimi J. Characterization of splash-plate atomizers using numerical simulations Atomization and Sprays. 17: 347-380. DOI: 10.1615/Atomizspr.V17.I4.30  0.388
2007 Moradian A, Mostaghimi J. Surface tension measurement at high temperatures by using dynamics of melt flow Journal of Fluids Engineering, Transactions of the Asme. 129: 991-1001. DOI: 10.1115/1.2746918  0.406
2007 Soltani R, Coyle TW, Mostaghimi J. Creep behavior of plasma-sprayed zirconia thermal barrier coatings Journal of the American Ceramic Society. 90: 2873-2878. DOI: 10.1111/J.1551-2916.2007.01822.X  0.456
2007 Mostaghimi J, Chandra S. Heat transfer in plasma spray coating processes Advances in Heat Transfer. 40: 143-204. DOI: 10.1016/S0065-2717(07)40002-8  0.513
2007 Salimijazi HR, Raessi M, Mostaghimi J, Coyle TW. Study of solidification behavior and splat morphology of vacuum plasma sprayed Ti alloy by computational modeling and experimental results Surface and Coatings Technology. 201: 7924-7931. DOI: 10.1016/J.Surfcoat.2007.03.037  0.409
2007 Raessi M, Mostaghimi J, Bussmann M. Advecting normal vectors: A new method for calculating interface normals and curvatures when modeling two-phase flows Journal of Computational Physics. 226: 774-797. DOI: 10.1016/J.Jcp.2007.04.023  0.307
2007 McDonald A, Xue M, Chandra S, Mostaghimi J, Moreau C. Modeling fragmentation of plasma-sprayed particles impacting on a solid surface at room temperature Comptes Rendus - Mecanique. 335: 351-356. DOI: 10.1016/J.Crme.2007.05.006  0.444
2007 Parizi HB, Rosenzweig L, Mostaghimi J, Chandra S, Coyle T, Salimi H, Pershin L, McDonald A, Moreau C. Numerical simulation of droplet impact on patterned surfaces Journal of Thermal Spray Technology. 16: 713-721. DOI: 10.1007/S11666-007-9122-8  0.445
2007 Shan Y, Coyle TW, Mostaghimi J. Numerical simulation of droplet breakup and collision in the solution precursor plasma spraying Proceedings of the International Thermal Spray Conference. 698-704. DOI: 10.1007/S11666-007-9102-Z  0.472
2007 Shan Y, Coyle TW, Mostaghimi J. 3D modeling of transport phenomena and the injection of the solution droplets in the solution precursor plasma spraying Proceedings of the International Thermal Spray Conference. 736-743. DOI: 10.1007/S11666-007-9101-0  0.446
2007 Salimijazi HR, Pershin L, Coyle TW, Mostaghimi J, Chandra S, Lau YC, Rosenzweig L, Moran E. Measuring substrate temperature variation during application of plasma-sprayed zirconia coatings Journal of Thermal Spray Technology. 16: 580-587. DOI: 10.1007/S11666-007-9050-7  0.483
2007 Salimijazi HR, Pershin L, Coyle TW, Mostaghimi J, Chandra S, Lau YC, Rosenzweig L, Moran E. Effect of droplet characteristics and substrate surface topography on the final morphology of plasma-sprayed zirconia single splats Journal of Thermal Spray Technology. 16: 291-299. DOI: 10.1007/S11666-007-9035-6  0.471
2007 Jazi HRS, Coyle TW, Mostaghimi J. Understanding grain growth and pore elimination in vacuum-plasma-sprayed titanium alloy Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 476-484. DOI: 10.1007/S11661-006-9075-4  0.355
2007 Xue M, Chandra S, Mostaghimi J, Salimijazi HR. Formation of pores in thermal spray coatings due to incomplete filling of crevices in patterned surfaces Plasma Chemistry and Plasma Processing. 27: 647-657. DOI: 10.1007/S11090-007-9097-8  0.48
2007 Xue M, Heichal Y, Chandra S, Mostaghimi J. Modeling the impact of a molten metal droplet on a solid surface using variable interfacial thermal contact resistance Journal of Materials Science. 42: 9-18. DOI: 10.1007/S10853-006-1129-X  0.469
2006 Xue M, Mostaghimi J, Chandra S. Numerical Simulation Of Coating Deposition In A Thermal Spray Process Mathematics of Computation. DOI: 10.1615/Ihtc13.P9.160  0.423
2006 Xue M, Chandra S, Mostaghimi J. Investigation of splat curling up in thermal spray coatings Proceedings of the International Thermal Spray Conference. 531-536. DOI: 10.1361/105996306X147315  0.473
2006 Soltani R, Garcia E, Coyle TW, Mostaghimi J, Lima RS, Marple BR, Moreau C. Thermomechanical behavior of nanostructured plasma sprayed zirconia coatings Journal of Thermal Spray Technology. 15: 657-662. DOI: 10.1361/105996306X147171  0.462
2006 Golozar MA, Mostaghimi J, Coyle T. Wear behaviour of nanostructured and conventional 8 wt-%Y2O 3-ZrO2 coatings against Si3N4 ball Surface Engineering. 22: 399-407. DOI: 10.1179/174329406X126744  0.428
2006 Raessi M, Mostaghimi J, Bussmann M. Effect of surface roughness on splat shapes in the plasma spray coating process Thin Solid Films. 506: 133-135. DOI: 10.1016/J.Tsf.2005.08.140  0.463
2006 Abedini A, Pourmousa A, Chandra S, Mostaghimi J. Effect of substrate temperature on the properties of coatings and splats deposited by wire arc spraying Surface and Coatings Technology. 201: 3350-3358. DOI: 10.1016/J.Surfcoat.2006.07.184  0.431
2006 Ghafouri-Azar R, Mostaghimi J, Chandra S. Modeling development of residual stresses in thermal spray coatings Computational Materials Science. 35: 13-26. DOI: 10.1016/J.Commatsci.2005.02.007  0.805
2006 Salimijazi HR, Coyle TW, Mostaghimi J. Vacuum plasma spraying: A new concept for manufacturing Ti-6Al-4V structures Jom. 58: 50-56. DOI: 10.1007/S11837-006-0083-Z  0.347
2006 Soltani R, Coyle TW, Mostaghimi J. Creep behaviour of plasma sprayed thermal barrier coatings Ceramic Engineering and Science Proceedings. 27: 37-46.  0.343
2005 Pourmousa A, Mostaghimi J, Abedini A, Chandra S. Particle size distribution in a wire-arc spraying system Journal of Thermal Spray Technology. 14: 502-510. DOI: 10.1361/105996305X76522  0.322
2005 Salimijazi HR, Coyle TW, Mostaghimi J, Leblanc L. Microstructure of vacuum plasma-sprayed boron carbide Journal of Thermal Spray Technology. 14: 362-368. DOI: 10.1361/105996305X59431  0.375
2005 Mehdizadeh NZ, Lamontagne M, Moreau C, Chandra S, Mostaghimi J. Photographing impact of molten molybdenum particles in a plasma spray Journal of Thermal Spray Technology. 14: 354-361. DOI: 10.1361/105996305X59422  0.789
2005 Salimijazi HR, Coyle TW, Mostaghimi J, Leblanc L. Microstructure and failure mechanism in As-deposited, vacuum plasma-sprayed Ti-6Al-4V Alloy Journal of Thermal Spray Technology. 14: 215-223. DOI: 10.1361/10599630523773  0.332
2005 Dolatabadi A, Pershin V, Mostaghimi J. New attachment for controlling gas flow in the HVOF process Journal of Thermal Spray Technology. 14: 91-99. DOI: 10.1361/10599630522774  0.44
2005 Moradian A, Mostaghimi J. High temperature surface tension measurement Ieee Transactions On Plasma Science. 33: 410-411. DOI: 10.1109/Tps.2005.844995  0.431
2005 Mehdi-Nejad V, Mostaghimi J, Chandra S. Modeling interfacial heat transfer from single or multiple deforming droplets International Journal of Computational Fluid Dynamics. 19: 105-113. DOI: 10.1080/10618560410001729090  0.388
2005 Raessi M, Mostaghimi J. Three-dimensional modeling of density variation due to phase change in complex free surface flows Numerical Heat Transfer, Part B: Fundamentals. 47: 507-531. DOI: 10.1080/10407790590928964  0.352
2005 Shirani E, Ashgriz N, Mostaghimi J. Interface pressure calculation based on conservation of momentum for front capturing methods Journal of Computational Physics. 203: 154-175. DOI: 10.1016/J.Jcp.2004.08.017  0.315
2005 Azar RG, Yang Z, Chandra S, Mostaghimi J. Impact of molten metal droplets on the tip of a pin projecting from a flat surface International Journal of Heat and Fluid Flow. 26: 334-347. DOI: 10.1016/J.Ijheatfluidflow.2004.08.004  0.411
2005 Shan Y, Mostaghimi J. Modeling injection of dense liquid sprays in radio frequency inductively coupled plasmas Plasma Chemistry and Plasma Processing. 25: 193-214. DOI: 10.1007/S11090-004-3027-9  0.427
2005 Salimi Jazi HR, Azarmi F, Coyle TW, Mostaghimi J. Study of the relationship between the young's modulus and microstructure of vacuum plasma sprayed boron carbide Ceramic Engineering and Science Proceedings. 26: 235-244.  0.305
2005 Garcia E, Soltani R, Coyle TW, Mostaghimi J, De Pablos A, Osendi MI, Miranzo P. Thermal behaviour of thermal barrier coatings and steel/ thermal barrier coatings structures Ceramic Engineering and Science Proceedings. 26: 137-144.  0.303
2004 Mehdizadeh NZ, Raessi M, Chandra S, Mostaghimi J. Effect of substrate temperature on splashing molten tin droplets Journal of Heat Transfer. 126: 445-452. DOI: 10.1115/1.1737778  0.808
2004 Dolatabadi A, Mostaghimi J, Pershin V. Modeling Dense Suspension of Solid Particles in Highly Compressible Flows International Journal of Computational Fluid Dynamics. 18: 125-131. DOI: 10.1080/10618560310001634221  0.333
2004 Ghafouri-Azar R, Mostaghimi J, Chandra S. Numerical Study of Impact and Solidification of a Droplet over a Deposited Frozen Splat International Journal of Computational Fluid Dynamics. 18: 133-138. DOI: 10.1080/10618560310001634212  0.801
2004 Mehdizadeh NZ, Chandra S, Mostaghimi J. Formation of fingers around the edges of a drop hitting a metal plate with high velocity Journal of Fluid Mechanics. 353-373. DOI: 10.1017/S0022112004009310  0.797
2004 Mehdi-Nejad V, Mostaghimi J, Chandra S. Modelling heat transfer in two-fluid interfacial flows International Journal For Numerical Methods in Engineering. 61: 1028-1048. DOI: 10.1002/Nme.1101  0.369
2004 Soltani R, Coyle TW, Mostaghimi J. Thermomechanical behaviour of bimodal structured thermal barrier coatings Proceedings of the International Thermal Spray Conference. 1068-1071.  0.326
2004 Abedini A, Pourmousa A, Chandra S, Mostaghimi J. Splat formation in wire arc spraying Proceedings of the International Thermal Spray Conference. 645-650.  0.321
2004 Fard MP, Ashgriz N, Mostaghimi J. A numerical model for flow simulation in spray nozzles Aiaa Paper. 7472-7482.  0.312
2003 Ghafouri-Azar R, Mostaghimi J, Chandra S, Charmchi M. A stochastic model to simulate the formation of a thermal spray coating Journal of Thermal Spray Technology. 12: 53-69. DOI: 10.1361/105996303770348500  0.818
2003 Pershin V, Lufitha M, Chandra S, Mostaghimi J. Effect of substrate temperature on adhesion strength of plasma-sprayed nickel coatings Journal of Thermal Spray Technology. 12: 370-376. DOI: 10.1361/105996303770348249  0.477
2003 Paul KC, Ishigaki T, Mostaghimi J, Sakuta T. Nonequilibrated situations of pulse modulated Ar - H2 and Ar - N2 thermal plasmas at atmospheric pressure Journal of Applied Physics. 93: 8867-8875. DOI: 10.1063/1.1571967  0.305
2003 Mehdi-Nejad V, Mostaghimi J, Chandra S. Air bubble entrapment under an impacting droplet Physics of Fluids. 15: 173-183. DOI: 10.1063/1.1527044  0.388
2003 Mehdizadeh NZ, Chandra S, Mostaghimi J. Adhesion of tin droplets impinging on a stainless steel plate: Effect of substrate temperature and roughness Science and Technology of Advanced Materials. 4: 173-181. DOI: 10.1016/S1468-6996(03)00029-9  0.796
2003 Dolatabadi A, Mostaghimi J, Pershin V. Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel (HVOF) spray process Journal of Materials Processing Technology. 137: 214-224. DOI: 10.1016/S0924-0136(02)01084-1  0.365
2003 Mostaghimi J, Chandra S, Ghafouri-Azar R, Dolatabadi A. Modeling thermal spray coating processes: A powerful tool in design and optimization Surface and Coatings Technology. 163: 1-11. DOI: 10.1016/S0257-8972(02)00686-2  0.811
2003 Ghafouri-Azar R, Shakeri S, Chandra S, Mostaghimi J. Interactions between molten metal droplets impinging on a solid surface International Journal of Heat and Mass Transfer. 46: 1395-1407. DOI: 10.1016/S0017-9310(02)00403-9  0.812
2003 Shan Y, Mostaghimi J. Numerical simulation of aerosol droplets desolvation in a radio frequency inductively coupled plasma Spectrochimica Acta - Part B Atomic Spectroscopy. 58: 1959-1977. DOI: 10.1016/J.Sab.2003.09.003  0.386
2002 Pasandideh-Fard M, Pershin V, Chandra S, Mostaghimi J. Splat shapes in a thermal spray coating process: Simulations and experiments Journal of Thermal Spray Technology. 11: 206-217. DOI: 10.1361/105996302770348862  0.492
2002 Mostaghimi J, Chandra S. Splat formation in plasma-spray coating process Pure and Applied Chemistry. 74: 441-445. DOI: 10.1351/Pac200274030441  0.512
2002 Ghafouri-Azar R, Mostaghimi J, Chandra S. A three-dimensional numerical study of tin droplets landing sequentially on a solid surface American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 257: 503-510. DOI: 10.1115/FEDSM2002-31234  0.791
2002 Mostaghimi J, Pasandideh-Fard M, Chandra S. Dynamics of Splat Formation in Plasma Spray Coating Process Plasma Chemistry and Plasma Processing. 22: 59-84. DOI: 10.1023/A:1012940515065  0.464
2002 Dolatabadi A, Mostaghimi J, Pershin V. Effect of a cylindrical shroud on particle conditions in high velocity oxy-fuel spray process Science and Technology of Advanced Materials. 3: 245-255. DOI: 10.1016/S1468-6996(02)00023-2  0.365
2002 Bussmann M, Mostaghimi J, Kirk DW, Graydon JW. A numerical study of steady flow and temperature fields within a melt spinning puddle International Journal of Heat and Mass Transfer. 45: 3997-4010. DOI: 10.1016/S0017-9310(02)00112-6  0.354
2002 Pasandideh-Fard M, Chandra S, Mostaghimi J. A three-dimensional model of droplet impact and solidification International Journal of Heat and Mass Transfer. 45: 2229-2242. DOI: 10.1016/S0017-9310(01)00336-2  0.465
2002 Mostaghimi J, Ghafouri-Azar R, Chandra S, Dolatabadi A. Modelling thermal spray coating processes: A powerful tool in design & optimization Technical Paper - Society of Manufacturing Engineers. Fc 0.809
2001 Paul KC, Mostaghimi J, Ishigaki T, Sakuta T. Transient response of radio frequency inductively coupled plasma for pulse modulation Plasma Chemistry and Plasma Processing. 21: 371-400. DOI: 10.1023/A:1011074410005  0.35
2001 Thomson I, Pershin V, Mostaghimi J, Chandra S. Experimental testing of a curvilinear gas shroud nozzle for improved plasma spraying Plasma Chemistry and Plasma Processing. 21: 65-82. DOI: 10.1023/A:1007041428743  0.424
2001 Pasandideh-Fard M, Aziz SD, Chandra S, Mostaghimi J. Cooling effectiveness of a water drop impinging on a hot surface International Journal of Heat and Fluid Flow. 22: 201-210. DOI: 10.1016/S0142-727X(00)00086-2  0.447
2001 Mehdizadeh NZ, Chandra S, Mostaghimi J. Splashing of a small molten tin droplet impinging on a solid surface at high velocity Proceedings of the National Heat Transfer Conference. 1: 503-510.  0.803
2001 Pasandideh-Fard M, Mostaghimi J, Chandra S. 3D model of the impact and solidification of a droplet on a solid surface 15th Aiaa Computational Fluid Dynamics Conference 0.356
2001 Ghafouri-Azar R, Mostaghimi J, Chandra S. Deposition Model of Thermal Spray Coatings Proceedings of the International Thermal Spray Conference. 951-958.  0.809
2001 Pershin V, Pasandideh-Fard M, Mostaghimi J, Chandra S. Effect of Substrate Properties on the Formation of Plasma Sprayed Alumina Splats Proceedings of the International Thermal Spray Conference. 813-820.  0.396
2001 Pasandideh-Fard M, Bussmann M, Chandra S, Mostaghimi J. Simulating droplet impact on a substrate of arbitrary shape Atomization and Sprays. 11: 397-414.  0.317
2000 Jankovic M, Mostaghimi J, Pershin V. Design of a new nozzle for direct current plasma guns with improved spraying parameters Journal of Thermal Spray Technology. 9: 114-120. DOI: 10.1361/105996300770350140  0.469
2000 Bussmann M, Aziz SD, Chandra S, Mostaghimi J. Photographs and Simulations of Molten Metal Droplets Landing on a Solid Surface Journal of Heat Transfer-Transactions of the Asme. 122: 422-422. DOI: 10.1115/1.1289640  0.331
2000 Bussmann M, Chandra S, Mostaghimi J. Modeling the splash of a droplet impacting a solid surface Physics of Fluids. 12: 3121-3132. DOI: 10.1063/1.1321258  0.392
2000 Chae YK, Mostaghimi J, Yoshida T. Deformation and solidification process of a super-cooled droplet impacting on the substrate under plasma spraying conditions Science and Technology of Advanced Materials. 1: 147-156. DOI: 10.1016/S1468-6996(00)00013-9  0.421
2000 Mehdizadeh NZ, Chandra S, Mostaghimi J. Splashing of a small droplet impinging on a solid surface at high velocity American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 366: 397-405.  0.801
2000 Pasandideh-Fard M, Mostaghimi J, Chandra S. Numerical Simulation of Thermal Spray Coating Formation Proceedings of the International Thermal Spray Conference. 125-134.  0.358
2000 Pershin V, Thomson I, Chandra S, Mostaghimi J. Splashing of Nickel Droplets During Plasma Spraying Proceedings of the International Thermal Spray Conference. 721-727.  0.345
1999 Sobolewski K, Mostaghimi J, Tran H. Modelling Of Particle Deposition On Superheater Tubes In Kraft Recovery Boilers International Journal of Modelling and Simulation. 19: 262-270. DOI: 10.1080/02286203.1999.11760427  0.346
1999 Bussmann M, Mostaghimi J, Chandra S. On a three-dimensional volume tracking model of droplet impact Physics of Fluids. 11: 1406-1417. DOI: 10.1063/1.870005  0.396
1998 Mostaghimi J. Modeling droplet impact in plasma spray processes Pure and Applied Chemistry. 70: 1209-1215. DOI: 10.1351/Pac199870061209  0.399
1998 Bastani-Parizi H, Mostaghimi J. Chemical Kinetic Calculations Of The Gas Phase In Atmospheric Pressure Microwave Plasma-Assisted Chemical Vapour Deposition Of Diamond International Journal of Modelling and Simulation. 18: 16-25. DOI: 10.1080/02286203.1998.11760353  0.346
1998 Mostaghimi J, Paul KC, Sakuta T. Transient response of the radio frequency inductively coupled plasma to a sudden change in power Journal of Applied Physics. 83: 1898-1908. DOI: 10.1063/1.366914  0.329
1998 Pasandideh-Fard M, Bhola R, Chandra S, Mostaghimi J. Deposition of tin droplets on a steel plate: simulations and experiments International Journal of Heat and Mass Transfer. 41: 2929-2945. DOI: 10.1016/S0017-9310(98)00023-4  0.474
1997 Kim J, Mostaghimi J, Iravani R. Performance analysis of a radio-frequency induction plasma generator using nonlinear state-space approach Ieee Transactions On Plasma Science. 25: 1023-1028. DOI: 10.1109/27.649621  0.336
1997 Bussmann M, Chandra S, Mostaghimi J. Three-Dimensional Droplet Impact Physics of Fluids. 9. DOI: 10.1063/1.4739136  0.304
1997 Cai M, Haydar DA, Montaser A, Mostaghimi J. Computer simulation of argon-nitrogen and argon-oxygen inductively coupled plasmas Spectrochimica Acta - Part B Atomic Spectroscopy. 52: 369-386. DOI: 10.1016/S0584-8547(96)01579-0  0.316
1996 Pasandideh‐Fard M, Qiao YM, Chandra S, Mostaghimi J. Capillary effects during droplet impact on a solid surface Physics of Fluids. 8: 650-659. DOI: 10.1063/1.868850  0.412
1995 Cai M, Montaser A, Mostaghimi J. Two-Temperature Model for the Simulation of Atmospheric-Pressure Helium ICPs Applied Spectroscopy. 49: 1390-1402. DOI: 10.1366/0003702953965515  0.369
1995 Pasandideh-Fard M, Mostaghimi J. On the spreading and solidification of molten particles in a plasma spray process effect of thermal contact resistance Plasma Chemistry and Plasma Processing. 16: S83-S98. DOI: 10.1007/Bf01512629  0.406
1995 Jankovic M, Mostaghimi J. A new nozzle design for dc plasma spray guns Plasma Chemistry and Plasma Processing. 15: 607-628. DOI: 10.1007/Bf01447063  0.331
1994 Chabchoub F, Argyropoulos SA, Mostaghimi J. Mathematical modelling and experimental measurements on the horizontal ohno continuous casting process for pure tin Canadian Metallurgical Quarterly. 33: 73-88. DOI: 10.1179/Cmq.1994.33.1.73  0.373
1994 Cao M, Proulx P, Boulos MI, Mostaghimi J. Mathematical modeling of high‐power transferred arcs Journal of Applied Physics. 76: 7757-7767. DOI: 10.1063/1.357953  0.316
1993 Cai M, Montaser A, Mostaghimi J. Computer simulation of atmospheric-pressure helium inductively coupled plasma discharges Spectrochimica Acta Part B: Atomic Spectroscopy. 48: 789-807. DOI: 10.1016/0584-8547(93)80085-9  0.371
1993 Njah Z, Mostaghimi J, Boulos M. Mathematical modelling of the 3-D mixing in an induction plasma reactor International Journal of Heat and Mass Transfer. 36: 3909-3919. DOI: 10.1016/0017-9310(93)90141-R  0.361
1993 Njah Z, Mostaghimi J, Faghri M, Boulos M. Study of 3-D mixing of a cold jet with a transverse plasma stream International Journal of Heat and Mass Transfer. 36: 3897-3907. DOI: 10.1016/0017-9310(93)90140-2  0.368
1991 Proulx P, Mostaghimi J, Boulos MI. Radiative energy transfer in induction plasma modelling International Journal of Heat and Mass Transfer. 34: 2571-2579. DOI: 10.1016/0017-9310(91)90097-X  0.369
1990 Mostaghimi J, Boulos MI. Effect of frequency on local thermodynamic equilibrium conditions in an inductively coupled argon plasma at atmospheric pressure Journal of Applied Physics. 68: 2643-2648. DOI: 10.1063/1.346489  0.32
1990 Proulx P, Mostaghimi J, Boulos MI. Loading And Radiation Effects In Plasma Jet Modelling Le Journal De Physique Colloques. 51. DOI: 10.1051/Jphyscol:1990532  0.302
1990 Zhao GY, Mostaghimi J, Boulos MI. The induction plasma chemical reactor: Part II. Kinetic model Plasma Chemistry and Plasma Processing. 10: 151-166. DOI: 10.1007/Bf01460453  0.341
1990 Zhao GY, Mostaghimi J, Boulos MI. The induction plasma chemical reactor: Part I. Equilibrium model Plasma Chemistry and Plasma Processing. 10: 133-150. DOI: 10.1007/Bf01460452  0.36
1989 Etemadi K, Zhao GY, Mostaghimi J. Impact of cathode evaporation on a free-burning arc Journal of Physics D. 22: 1692-1696. DOI: 10.1088/0022-3727/22/11/018  0.367
1989 El‐Hage M, Mostaghimi J, Boulos MI. A turbulent flow model for the rf inductively coupled plasma Journal of Applied Physics. 65: 4178-4185. DOI: 10.1063/1.343297  0.344
1989 Yang P, Barnes RM, Mostaghimi J, Boulos MI. Application of a two-dimensional model in the simulation of an analytical inductively coupled plasma discharge Spectrochimica Acta Part B: Atomic Spectroscopy. 44: 657-666. DOI: 10.1016/0584-8547(89)80064-3  0.359
1989 Mostaghimi J, Boulos MI. Two-dimensional electromagnetic field effects in induction plasma modelling Plasma Chemistry and Plasma Processing. 9: 25-44. DOI: 10.1007/Bf01015825  0.32
1987 Mostaghimi J, Proulx P, Boulos MI. A two‐temperature model of the inductively coupled rf plasma Journal of Applied Physics. 61: 1753-1760. DOI: 10.1063/1.338073  0.361
1987 Proulx P, Mostaghimi J, Boulos MI. Heating of powders in an r.f. inductively coupled plasma under dense loading conditions Plasma Chemistry and Plasma Processing. 7: 29-52. DOI: 10.1007/Bf01015998  0.354
1985 Mostaghimi J, Proulx P, Boulos MI. An analysis of the computer modeling of the flow and temperature fields in an inductively coupled plasma Numerical Heat Transfer Part a-Applications. 8: 187-201. DOI: 10.1080/01495728508961849  0.332
1985 Proulx P, Mostaghimi J, Boulos MI. Plasma-particle interaction effects in induction plasma modeling under dense loading conditions International Journal of Heat and Mass Transfer. 28: 1327-1336. DOI: 10.1016/0017-9310(85)90163-2  0.359
1984 Mostaghimi J, Proulx P, Boulos MI. Parametric study of the flow and temperature fields in an inductively coupled r.f. plasma torch Plasma Chemistry and Plasma Processing. 4: 199-217. DOI: 10.1007/Bf00566841  0.35
1980 Mostaghimi J, Pfender E. Measurement of thermal conductivities of soils WäRme- Und StoffüBertragung. 13: 3-9. DOI: 10.1007/BF00997628  0.428
Show low-probability matches.