Year |
Citation |
Score |
2020 |
Loiola BR, Orlande HRB, Dulikravich GS. Approximate Bayesian computation applied to the identification of thermal damage of biological tissues due to laser irradiation International Journal of Thermal Sciences. 151: 106243. DOI: 10.1016/J.Ijthermalsci.2019.106243 |
0.322 |
|
2020 |
Jumabekova A, Berger J, Foucquier A, Dulikravich GS. Searching an optimal experiment observation sequence to estimate the thermal properties of a multilayer wall under real climate conditions International Journal of Heat and Mass Transfer. 155: 119810. DOI: 10.1016/J.Ijheatmasstransfer.2020.119810 |
0.345 |
|
2020 |
Jha R, Dulikravich GS. Solidification and heat treatment simulation for aluminum alloys with scandium addition through CALPHAD approach Computational Materials Science. 182: 109749. DOI: 10.1016/J.Commatsci.2020.109749 |
0.321 |
|
2019 |
Reddy SR, Dulikravich GS. Simultaneous determination of spatially varying thermal conductivity and specific heat using boundary temperature measurements Inverse Problems in Science and Engineering. 27: 1635-1649. DOI: 10.1080/17415977.2019.1578352 |
0.375 |
|
2019 |
Berger J, Busser T, Reddy S, Dulikravich GS. Evaluation of the reliability of a heat and mass transfer model in hygroscopic material International Journal of Heat and Mass Transfer. 142: 118258. DOI: 10.1016/J.Ijheatmasstransfer.2019.06.014 |
0.387 |
|
2019 |
Reddy SR, Dulikravich GS. Many-objective differential evolution optimization based on reference points: NSDE-R Structural and Multidisciplinary Optimization. 60: 1455-1473. DOI: 10.1007/S00158-019-02272-0 |
0.346 |
|
2018 |
Pacheco C, Orlande HR, Colaco M, Dulikravich GS. State estimation problems in PRF-shift magnetic resonance thermometry International Journal of Numerical Methods For Heat & Fluid Flow. 28: 315-335. DOI: 10.1108/Hff-10-2016-0427 |
0.348 |
|
2018 |
Loiola BR, Orlande HRB, Dulikravich GS. Thermal damage during ablation of biological tissues Numerical Heat Transfer, Part a: Applications. 73: 685-701. DOI: 10.1080/10407782.2018.1464794 |
0.326 |
|
2017 |
Abdoli A, Reddy SR, Dulikravich GS, Zeidi SMJ. Effect of cooling fluids on high frequency electric and magnetic fields in microelectronic systems with integrated TSVs Microelectronics Journal. 64: 19-28. DOI: 10.1016/J.Mejo.2017.03.015 |
0.348 |
|
2017 |
Reddy SR, Dulikravich GS, Zeidi S. Non-destructive estimation of spatially varying thermal conductivity in 3D objects using boundary thermal measurements International Journal of Thermal Sciences. 118: 488-496. DOI: 10.1016/J.Ijthermalsci.2017.05.011 |
0.401 |
|
2017 |
Inclan EJ, Dulikravich GS. Demonstration of effective global optimization techniques via comparative analysis on a large analytical problem set Structural and Multidisciplinary Optimization. 55: 179-204. DOI: 10.1007/S00158-016-1485-3 |
0.302 |
|
2016 |
Dulikravich GS, Reddy SR, Pasqualette MA, Colaço MJ, Orlande HRB, Coverston J. Inverse determination of spatially varying material coefficients in solid objects Journal of Inverse and Ill-Posed Problems. 24: 181-194. DOI: 10.1515/Jiip-2015-0057 |
0.385 |
|
2016 |
Pacheco CC, Orlande HRB, Colaço MJ, Dulikravich GS. Real-time identification of a high-magnitude boundary heat flux on a plate Inverse Problems in Science and Engineering. 24: 1661-1679. DOI: 10.1080/17415977.2016.1195829 |
0.373 |
|
2016 |
Reddy SR, Dulikravich GS. Inverse Design of Cooling Arrays of Micro Pin-Fins Subject to Specified Coolant Inlet Temperature and Hot Spot Temperature Heat Transfer Engineering. 38: 1147-1156. DOI: 10.1080/01457632.2016.1239924 |
0.34 |
|
2016 |
Jha R, Dulikravich GS, Chakraborti N, Fan M, Schwartz J, Koch CC, Colaco MJ, Poloni C, Egorov IN. Algorithms for design optimization of chemistry of hard magnetic alloys using experimental data Journal of Alloys and Compounds. 682: 454-467. DOI: 10.1016/J.Jallcom.2016.04.218 |
0.336 |
|
2015 |
Gavrilović NN, Rašuo BP, Dulikravich GS, Parezanović VB. Commercial aircraft performance improvement using winglets Fme Transactions. 43: 1-8. DOI: 10.5937/Fmet1501001G |
0.35 |
|
2015 |
Reddy SR, Dulikravich GS. Inverse design of cooling of electronic chips subject to specified hot spot temperature and coolant inlet temperature Asme 2015 International Technical Conference and Exhibition On Packaging and Integration of Electronic and Photonic Microsystems, Interpack 2015, Collocated With the Asme 2015 13th International Conference On Nanochannels, Microchannels, and Minichannels. 3. DOI: 10.1115/IPACK2015-48346 |
0.352 |
|
2015 |
Reddy SR, Dulikravich GS. Multi-objective optimization of micro pin-fin arrays for cooling of high heat flux electronics Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7. DOI: 10.1115/IMECE2015-54166 |
0.324 |
|
2015 |
Abdoli A, Dulikravich GS, Vasquez G, Rastkar S. Thermo-Fluid-Stress-Deformation Analysis of Two-Layer Microchannels for Cooling Chips With Hot Spots Journal of Electronic Packaging. 137. DOI: 10.1115/1.4030005 |
0.382 |
|
2015 |
Abdoli A, Dulikravich GS, Bajaj CL, Stowe DF, Jahania SM. Human heart preservation analyses using convective cooling International Journal of Numerical Methods For Heat and Fluid Flow. 25: 1426-1443. DOI: 10.1108/Hff-08-2014-0251 |
0.366 |
|
2015 |
Jha R, Pettersson F, Dulikravich GS, Saxen H, Chakraborti N. Evolutionary design of nickel-based superalloys using data-driven genetic algorithms and related strategies Materials and Manufacturing Processes. 30: 488-510. DOI: 10.1080/10426914.2014.984203 |
0.329 |
|
2015 |
Pacheco CC, Orlande HRB, Colaço MJ, Dulikravich GS. Estimation of a location-and time-dependent high-magnitude heat flux in a heat conduction problem using the kalman filter and the approximation error model Numerical Heat Transfer; Part a: Applications. 68: 1198-1219. DOI: 10.1080/10407782.2015.1037136 |
0.39 |
|
2015 |
Reddy SR, Abdoli A, Dulikravich GS, Pacheco CC, Vasquez G, Jha R, Colaco MJ, Orlande HRB. Multi-objective optimization of micro pin-fin arrays for cooling of high heat flux electronics with a hot spot Asme 2015 International Technical Conference and Exhibition On Packaging and Integration of Electronic and Photonic Microsystems, Interpack 2015, Collocated With the Asme 2015 13th International Conference On Nanochannels, Microchannels, and Minichannels. 3. DOI: 10.1080/01457632.2016.1242953 |
0.445 |
|
2015 |
Baharanchi AA, Gokaltun S, Dulikravich G. Performance improvement of existing drag models in two-fluid modeling of gas?solid flows using a PR-DNS based drag model Powder Technology. 286: 257-268. DOI: 10.1016/J.Powtec.2015.07.001 |
0.304 |
|
2015 |
Abdoli A, Jimenez G, Dulikravich GS. Thermo-fluid analysis of micro pin-fin array cooling configurations for high heat fluxes with a hot spot International Journal of Thermal Sciences. 90: 290-297. DOI: 10.1016/J.Ijthermalsci.2014.12.021 |
0.38 |
|
2014 |
Abdoli A, Dulikravich GS, Bajaj C, Stowe DF, Jahania MS. Human heart conjugate cooling simulation: unsteady thermo-fluid-stress analysis. International Journal For Numerical Methods in Biomedical Engineering. 30: 1372-86. PMID 25045006 DOI: 10.1002/Cnm.2662 |
0.323 |
|
2014 |
Abdoli A, Dulikravich GS. Multi-objective design optimization of branching, multifloor, counterflow microheat exchangers Journal of Heat Transfer. 136. DOI: 10.1115/1.4027911 |
0.452 |
|
2014 |
Orlande HRB, Dulikravich GS, Neumayer M, Watzenig D, Colaco MJ. Accelerated bayesian inference for the estimation of spatially varying heat flux in a heat conduction problem Numerical Heat Transfer; Part a: Applications. 65: 1-25. DOI: 10.1080/10407782.2013.812008 |
0.407 |
|
2014 |
Gokaltun S, Dulikravich GS. Lattice Boltzmann method for rarefied channel flows with heat transfer International Journal of Heat and Mass Transfer. 78: 796-804. DOI: 10.1016/J.Ijheatmasstransfer.2014.07.018 |
0.435 |
|
2013 |
Abdoli A, Dulikravich GS. Multi-objective design optimization of multi-floor, counterflow micro heat exchangers Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 3. DOI: 10.1115/HT2013-17738 |
0.336 |
|
2013 |
Vianna FLV, Orlande HRB, Dulikravich GS. Pipeline heating method based on optimal control and state estimation Heat Transfer Engineering. 34: 511-519. DOI: 10.1080/01457632.2012.723536 |
0.415 |
|
2013 |
Abdoli A, Dulikravich GS. Optimized multi-floor throughflow micro heat exchangers Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 8. DOI: 10.1016/J.Ijthermalsci.2013.12.008 |
0.464 |
|
2012 |
Dulikravich GS, Dennis BH, Baker DP, Kennon SR, Orlande HRB, Colaco MJ. Inverse problems in aerodynamics, heat transfer, elasticity and materials design International Journal of Aeronautical and Space Sciences. 13: 405-420. DOI: 10.5139/Ijass.2012.13.4.405 |
0.689 |
|
2012 |
Orlande HRB, Colaco MJ, Dulikravich GS, Vianna F, Silva Wd, Fonseca H, Fudym O. State Estimation Problems In Heat Transfer International Journal For Uncertainty Quantification. 2: 239-258. DOI: 10.1615/Int.J.Uncertaintyquantification.2012003582 |
0.333 |
|
2012 |
Dennis BH, Dulikravich GS. Inverse determination of unsteady temperatures and heat fluxes on inaccessible boundaries Journal of Inverse and Ill-Posed Problems. 20: 791-803. DOI: 10.1515/Jip-2012-0052 |
0.701 |
|
2012 |
Colao MJ, Orlande HRB, Da Silva WB, Dulikravich GS. Application of two bayesian filters to estimate unknown heat fluxes in a natural convection problem Journal of Heat Transfer. 134. DOI: 10.1115/1.4006487 |
0.31 |
|
2010 |
Baker D, Dulikravich GS, Dennis BH, Martin TJ. Inverse determination of eroded smelter wall thickness variation using an elastic membrane concept Journal of Heat Transfer. 132: 1-8. DOI: 10.1115/1.4000436 |
0.675 |
|
2010 |
Patel RR, Dulikravich GS, Agarwal A. Effect of mandrel rotation on the accuracy of computed temperature profile during near net shape forming by plasma spraying Materials and Manufacturing Processes. 25: 1365-1371. DOI: 10.1080/10426914.2010.480994 |
0.369 |
|
2010 |
Patel RR, Keshri AK, Dulikravich GS, Agarwal A. An experimental and computational methodology for near net shape fabrication of thin walled ceramic structures by plasma spray forming Journal of Materials Processing Technology. 210: 1260-1269. DOI: 10.1016/J.Jmatprotec.2010.03.012 |
0.338 |
|
2010 |
Gokaltun S, Dulikravich GS. Lattice Boltzmann computations of incompressible laminar flow and heat transfer in a constricted channel Computers and Mathematics With Applications. 59: 2431-2441. DOI: 10.1016/J.Camwa.2009.08.045 |
0.419 |
|
2010 |
Chowdhury S, Dulikravich GS. Improvements to single-objective constrained predator-prey evolutionary optimization algorithm Structural and Multidisciplinary Optimization. 41: 541-554. DOI: 10.1007/S00158-009-0433-X |
0.331 |
|
2009 |
Chowdhury S, Dulikravich GS, Moral RJ. Modified predator-prey algorithm for constrained and unconstrained multi-objective optimisation International Journal of Mathematical Modelling and Numerical Optimisation. 1: 1-38. DOI: 10.1504/Ijmmno.2009.030085 |
0.307 |
|
2009 |
Colaço MJ, Dulikravich GS, Orlande HRB. Magnetohydrodynamic simulations using radial basis functions International Journal of Heat and Mass Transfer. 52: 5932-5939. DOI: 10.1016/J.Ijheatmasstransfer.2009.08.009 |
0.398 |
|
2009 |
Cheung N, Santos NS, Quaresma JMV, Dulikravich GS, Garcia A. Interfacial heat transfer coefficients and solidification of an aluminum alloy in a rotary continuous caster International Journal of Heat and Mass Transfer. 52: 451-459. DOI: 10.1016/J.Ijheatmasstransfer.2008.07.003 |
0.36 |
|
2008 |
Moral RJ, Dulikravich GS. Multi-objective hybrid evolutionary optimization with automatic switching among constituent algorithms Aiaa Journal. 46: 673-681. DOI: 10.2514/1.28926 |
0.336 |
|
2008 |
Orlande HRB, Colaço MJ, Dulikravich GS. Approximation of the likelihood function in the Bayesian technique for the solution of inverse problems Inverse Problems in Science and Engineering. 16: 677-692. DOI: 10.1080/17415970802231677 |
0.343 |
|
2008 |
Colaco MJ, Dulikravich GS, Sahoo D. A response surface method-based hybrid optimizer Inverse Problems in Science and Engineering. 16: 717-741. DOI: 10.1080/17415970802082724 |
0.343 |
|
2007 |
Kanevce GH, Kanevce LP, Mitrevski VB, Dulikravich GS, Orlande HRB. Inverse approaches to drying of thin bodies with significant shrinkage effects Journal of Heat Transfer. 129: 379-386. DOI: 10.1115/1.2427072 |
0.395 |
|
2007 |
Silva PMP, Orlande HRB, Colaço MJ, Shiakolas PS, Dulikravich GS. Identification and design of source term in a two-region heat conduction problem Inverse Problems in Science and Engineering. 15: 661-677. DOI: 10.1080/17415970701198159 |
0.356 |
|
2007 |
Colaço MJ, Dulikravich GS. Solidification of double-diffusive flows using thermo-magneto-hydrodynamics and optimization Materials and Manufacturing Processes. 22: 594-606. DOI: 10.1080/10426910701322583 |
0.434 |
|
2007 |
Gonzalez M, Jelisavcic N, Moral RJ, Sahoo D, Dulikravich GS, Martin TJ. Multi-objective design optimization of topology and performance of branching networks of cooling passages International Journal of Thermal Sciences. 46: 1191-1202. DOI: 10.1016/J.Ijthermalsci.2007.06.010 |
0.414 |
|
2006 |
Dulikravich GS, Colaco MJ. Convective heat transfer control using magnetic and electric fields Journal of Enhanced Heat Transfer. 13: 139-155. DOI: 10.1615/Jenhheattransf.V13.I2.40 |
0.45 |
|
2006 |
Colaço MJ, Orlande HRB, Dulikravich GS. Inverse and optimization problems in heat transfer Journal of the Brazilian Society of Mechanical Sciences and Engineering. 28: 1-24. DOI: 10.1590/S1678-58782006000100001 |
0.398 |
|
2006 |
Dulikravich GS, Egorov IN. Optimizing chemistry of bulk metallic glasses for improved thermal stability Tms Annual Meeting. 2006: 65-74. DOI: 10.1088/0965-0393/16/7/075010 |
0.366 |
|
2006 |
Colaço MJ, Dulikravich GS. A multilevel hybrid optimization of magnetohydrodynamic problems in double-diffusive fluid flow Journal of Physics and Chemistry of Solids. 67: 1965-1972. DOI: 10.1016/J.Jpcs.2006.05.036 |
0.393 |
|
2005 |
Dulikravich GS, Egorov-Yegorov IN. Design of alloy's concentrations for optimized strength, temperature, time-to-rupture, cost and weight Proceedings of the International Symposium On Superalloys and Various Derivatives. 419-428. DOI: 10.7449/2005/Superalloys_2005_419_428 |
0.304 |
|
2005 |
Kanevce L, Kanevce G, Dulikravich G. Application of inverse concepts to drying Thermal Science. 9: 31-44. DOI: 10.2298/Tsci0502031K |
0.38 |
|
2005 |
Egorov-Yegorov IN, Dulikravich GS. Chemical composition design of superalloys for maximum stress, temperature, and time-to-rupture using self-adapting response surface optimization Materials and Manufacturing Processes. 20: 569-590. DOI: 10.1081/Amp-200053592 |
0.375 |
|
2005 |
Colaço MJ, Dulikravich GS, Martin TJ. Control of unsteady solidification via optimized magnetic fields Materials and Manufacturing Processes. 20: 435-458. DOI: 10.1081/Amp-200053456 |
0.441 |
|
2005 |
Kanevce GH, Kanevce LP, Dulikravich GS, Orlande HRB. Estimation of thermophysical properties of moist materials under different drying conditions Inverse Problems in Science and Engineering. 13: 341-353. DOI: 10.1080/17415970500098485 |
0.4 |
|
2004 |
Dennis BH, Yegorov-Egorov IN, Sobieczky H, Dulikravich GS, Yoshimura S. Parallel thermoelasticity optimization of 3-D serpentine cooling passages in turbine blades International Journal of Turbo and Jet Engines. 21: 57-68. DOI: 10.1515/Tjj.2004.21.1.57 |
0.713 |
|
2004 |
Dennis BH, Han ZX, Dulikravich GS. Determination of temperatures and heat fluxes on surfaces and interfaces of multidomain three-dimensional electronic components Journal of Electronic Packaging, Transactions of the Asme. 126: 457-464. DOI: 10.1115/1.1827261 |
0.675 |
|
2004 |
Dennis BH, Dulikravich GS, Yoshimura S. A finite element formulation for the determination of unknown boundary conditions for three-dimensional steady thermoelastic problems Journal of Heat Transfer. 126: 110-118. DOI: 10.1115/1.1640360 |
0.687 |
|
2004 |
Dulikravich GS, Colaço MJ, Dennis BH, Martin TJ, Egorov-Yegorov IN, Lee S. Optimization of Intensities and Orientations of Magnets Controlling Melt Flow During Solidification Materials and Manufacturing Processes. 19: 695-718. DOI: 10.1081/AMP-200031887 |
0.602 |
|
2004 |
Dulikravich GS, Colaço MJ, Dennis BH, Martin TJ, Egorov-Yegorov IN, Lee S. Optimization of intensities and orientations of magnets controlling melt flow during solidification Materials and Manufacturing Processes. 19: 695-718. DOI: 10.1081/Amp-200031887 |
0.428 |
|
2004 |
Colaço MJ, Dulikravich GS, Martin TJ. Optimization of wall electrodes for electro-hydrodynamic control of natural convection during solidification Materials and Manufacturing Processes. 19: 719-736. DOI: 10.1081/Amp-200028114 |
0.346 |
|
2004 |
Fan HY, Dulikravich GS, Han ZX. Aerodynamic data modeling using support vector machines Aiaa Paper. 2797-2807. DOI: 10.1080/10682760412331330177 |
0.305 |
|
2004 |
Martin TJ, Dulikravich GS. An implicit and explicit BEM sensitivity approach for thermo-structural optimization Engineering Analysis With Boundary Elements. 28: 257-265. DOI: 10.1016/S0955-7997(03)00056-0 |
0.5 |
|
2004 |
Rodrigues FA, Orlande HRB, Dulikravich GS. Simultaneous estimation of spatially dependent diffusion coefficient and source term in a nonlinear 1D diffusion problem Mathematics and Computers in Simulation. 66: 409-424. DOI: 10.1016/J.Matcom.2004.02.005 |
0.36 |
|
2003 |
Dennis BH, Eberhart RC, Dulikravich GS, Radons SW. Finite-element simulation of cooling of realistic 3-D human head and neck. Journal of Biomechanical Engineering. 125: 832-40. PMID 14986408 DOI: 10.1115/1.1634991 |
0.652 |
|
2003 |
Dennis B, Eberhart R, Dulikravich G, Radons S. Brain cooling strategies: Numerical simulations on a realistic human head geometry Wit Transactions On Biomedicine and Health. 6: 45-54. DOI: 10.2495/Bio030051 |
0.68 |
|
2003 |
Dulikravich GS, Colaço MJ, Martin TJ, Lee S. An inverse method allowing user-specified layouts of magnetized microfibers in solidifying composites Journal of Composite Materials. 37: 1351-1365. DOI: 10.1177/0021998303034308 |
0.304 |
|
2003 |
Lee ES, Dulikravich GS, Dennis BH. Rotor Cascade Shape Optimization With Unsteady Passing Wakes Using Implicit Dual-Time Stepping and a Genetic Algorithm International Journal of Rotating Machinery. 9: 353-361. DOI: 10.1155/S1023621X03000332 |
0.688 |
|
2003 |
Colaço MJ, Dulikravich GS, Martin TJ. Optimization of wall electrodes for electro-hydrodynamic control of natural convection effects during solidification American Society of Mechanical Engineers, Materials Division (Publication) Md. 98: 1-8. DOI: 10.1115/Imece2003-41703 |
0.428 |
|
2003 |
Dennis BH, Han ZX, Dulikravich GS. Determination of temperatures and heat fluxes on surfaces and interfaces of multi-domain three-dimensional electronic components American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 374: 263-270. DOI: 10.1115/1.1827261 |
0.698 |
|
2002 |
Martin TJ, Dulikravich GS. Analysis and multidisciplinary optimization of internal coolant networks in turbine blades Journal of Propulsion and Power. 18: 896-906. DOI: 10.2514/2.6015 |
0.484 |
|
2002 |
Dennis BH, Eberhart RC, Dulikravich GS, Radons SW. Finite element simulation of cooling of realistic 3-D human head and neck American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 373: 69-81. DOI: 10.1115/IMECE2002-32045 |
0.623 |
|
2002 |
Dennis BH, Dulikravich GS. Magnetic field suppression of melt flow in crystal growth International Journal of Heat and Fluid Flow. 23: 269-277. DOI: 10.1016/S0142-727X(02)00174-1 |
0.64 |
|
2001 |
Dennis BH, Dulikravich GS, Han ZX. Optimization of turbomachinery airfoils with a genetic/sequential-quadratic-programming algorithm Journal of Propulsion and Power. 17: 1123-1128. DOI: 10.2514/2.5853 |
0.668 |
|
2001 |
Dennis BH, Egorov IN, Han Z, Dulikravich GS, Poloni C. Multi-Objective Optimization of Turbomachinery Cascades for Minimum Loss, Maximum Loading, and Maximum Gap-to-Chord Ratio International Journal of Turbo and Jet Engines. 18. DOI: 10.1515/TJJ.2001.18.3.201 |
0.578 |
|
2001 |
Han Z, Dennis BH, Dulikravich GS. Simultaneous Prediction of External Flow-Field and Temperature in Internally Cooled 3-D Turbine Blade Material International Journal of Turbo and Jet Engines. 18. DOI: 10.1515/TJJ.2001.18.1.47 |
0.62 |
|
2001 |
Zhang Z, Han ZX, Dulikravich GS. Numerical simulation of laser induced plasma during pulsed laser deposition Journal of Applied Physics. 90: 5889-5897. DOI: 10.1063/1.1415068 |
0.317 |
|
2001 |
Dennis BH, Dulikravich GS. Optimization of magneto-hydrodynamic control of diffuser flows using micro-genetic algorithms and least-squares finite elements Finite Elements in Analysis and Design. 37: 349-363. DOI: 10.1016/S0168-874X(00)00052-4 |
0.679 |
|
2001 |
Ko HJ, Dulikravich GS. Non-reflective boundary conditions for a consistent two-dimensional planar model of electro-magneto-hydrodynamics (EMHD) International Journal of Non-Linear Mechanics. 36: 155-163. DOI: 10.1016/S0020-7462(99)00096-7 |
0.376 |
|
2000 |
Han ZX, Dennis BH, Dulikravich GS. Simultaneous prediction of external flow-field and temperature in internally cooled 3-D turbine blade material Proceedings of the Asme Turbo Expo. 3. DOI: 10.1515/Tjj.2001.18.1.47 |
0.696 |
|
2000 |
Ko HJ, Dulikravich GS. Non-Reflective Boundary Conditions for a Consistent Model of Axisymmetric Electro-Magneto-Hydrodynamic Flows International Journal of Nonlinear Sciences and Numerical Simulation. 1: 247-256. DOI: 10.1515/Ijnsns.2000.1.4.247 |
0.362 |
|
2000 |
Martin TJ, Dulikravich GS. Inverse determination of temperature-dependent thermal conductivity using steady surface data on arbitrary objects Journal of Heat Transfer. 122: 450-459. DOI: 10.1115/1.1287726 |
0.418 |
|
2000 |
Ko HJ, Dulikravich GS. Fully non-linear theory of electro-magneto-hydrodynamics International Journal of Non-Linear Mechanics. 35: 709-719. DOI: 10.1016/S0020-7462(99)00053-0 |
0.355 |
|
1999 |
Petrovic MV, Dulikravich GS, Martin TJ. Maximizing multistage turbine efficiency by optimizing hub and shroud shapes and inlet and exit conditions of each blade row Proceedings of the Asme Turbo Expo. 1. DOI: 10.1515/Tjj.2000.17.4.267 |
0.424 |
|
1999 |
Martin TJ, Dulikravich GS, Han ZX, Dennis BH. Minimization of coolant mass flow rate in internally cooled gas turbine blades Proceedings of the Asme Turbo Expo. 3. DOI: 10.1115/99-GT-146 |
0.693 |
|
1999 |
Dennis BH, Dulikravich GS. Simultaneous Determination of Temperatures, Heat Fluxes, Deformations, and Tractions on Inaccessible Boundaries Journal of Heat Transfer. 121: 537-545. DOI: 10.1115/1.2826014 |
0.675 |
|
1998 |
Dennis BH, Dulikravich GS. Simultaneous determination of temperatures, heat fluxes, deformations, and tractions on inaccessible boundaries American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 228: 1-5. DOI: 10.1115/1.2826014 |
0.464 |
|
1998 |
Martin TJ, Dulikravich GS. Inverse Determination of Steady Heat Convection Coefficient Distributions Journal of Heat Transfer. 120: 328-334. DOI: 10.1115/1.2824251 |
0.376 |
|
1997 |
Foster NF, Dulikravich GS. Three-dimensional aerodynamic shape optimization using genetic and gradient search algorithms Journal of Spacecraft and Rockets. 34: 36-42. DOI: 10.2514/2.3189 |
0.408 |
|
1997 |
Martin TJ, Dulikravich GS. Inverse determination of steady heat convection coefficient distributions American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 340: 151-158. DOI: 10.1115/1.2824251 |
0.474 |
|
1997 |
Dulikravich GS, Lynn SR. Unified electro-magneto-fluid dynamics (EMFD): Introductory concepts International Journal of Non-Linear Mechanics. 32: 913-922. DOI: 10.1016/S0020-7462(96)00084-4 |
0.318 |
|
1997 |
Dulikravich GS, Lynn SR. Unified electro-magneto-fluid dynamics (EMFD): A survey of mathematical models International Journal of Non-Linear Mechanics. 32: 923-932. DOI: 10.1016/S0020-7462(96)00083-2 |
0.336 |
|
1996 |
Choi KY, Dulikravich GS. Acceleration of iterative algorithms on highly clustered grids Aiaa Journal. 34: 691-699. DOI: 10.2514/3.13129 |
0.39 |
|
1996 |
Martin TJ, Dulikravich GS. Inverse Determination of Boundary Conditions and Sources in Steady Heat Conduction With Heat Generation Journal of Heat Transfer. 118: 546-554. DOI: 10.1115/1.2822666 |
0.334 |
|
1996 |
Martin TJ, Dulikravich GS. Inverse determination of boundary conditions and sources in steady heat conduction with heat generation Journal of Heat Transfer. 118: 546-554. DOI: 10.1115/1.2822666 |
0.441 |
|
1995 |
Dulikravich GS, Martin TJ. Geometrical inverse problems in three-dimensional non-linear steady heat conduction Engineering Analysis With Boundary Elements. 15: 161-169. DOI: 10.1016/0955-7997(95)00014-F |
0.5 |
|
1995 |
Martin TJ, Halderman JD, Dulikravich GS. An inverse method for finding unknown surface tractions and deformations in elastostatics Computers and Structures. 56: 825-835. DOI: 10.1016/0045-7949(95)00011-5 |
0.377 |
|
1995 |
Choi KY, Dulikravich GS. Sensitivity-based methods for convergence acceleration of iterative algorithms Computer Methods in Applied Mechanics and Engineering. 123: 161-172. DOI: 10.1016/0045-7825(94)00776-J |
0.392 |
|
1994 |
Dulikravich GS, Martin TJ. Inverse design of super-elliptic cooling passages in coated turbine blade airfoils Journal of Thermophysics and Heat Transfer. 8: 288-294. DOI: 10.2514/3.536 |
0.448 |
|
1994 |
Dulikravich GS, Ahuja V, Lee S. Modeling of dielectric fluid solidification with charged particles in electric fields and reduced gravity Numerical Heat Transfer, Part B: Fundamentals. 25: 357-373. DOI: 10.1080/10407799408955925 |
0.365 |
|
1994 |
Dulikravich GS, Ahuja V, Seungsoo L. Modeling three-dimensional solidification with magnetic fields and reduced gravity International Journal of Heat and Mass Transfer. 37: 837-853. DOI: 10.1016/0017-9310(94)90120-1 |
0.392 |
|
1993 |
Dulikravich GS, Ahuja V, Lee S. Simulation of Electrohydrodynamic Enhancement of Laminar Flow Heat Transfer Journal of Enhanced Heat Transfer. 1: 115-126. DOI: 10.1615/Jenhheattransf.V1.I1.100 |
0.371 |
|
1993 |
Dulikravich GS, Kosovic B, Lee S. Magnetized fiber orientation control in solidifying composites : numerical simulation Journal of Heat Transfer-Transactions of the Asme. 115: 255-262. DOI: 10.1115/1.2910658 |
0.391 |
|
1992 |
Dulikravich GS. Aerodynamic shape design and optimization - Status and trends Journal of Aircraft. 29: 1020-1026. DOI: 10.2514/3.46279 |
0.312 |
|
1991 |
Dulikravich GS, Kosovic B. Minimization of the number of cooling holes in internally cooled turbine blades Proceedings of the Asme Turbo Expo. 1. DOI: 10.1515/Tjj.1992.9.4.277 |
0.437 |
|
1991 |
Lee S, Dulikravich GS. Accelerated computation of viscous incompressible flows with heat transfer Numerical Heat Transfer, Part B: Fundamentals. 19: 223-241. DOI: 10.1080/10407799108944965 |
0.393 |
|
1991 |
Lee S, Dulikravich GS. Distributed minimal residual (DMR) method for acceleration of iterative algorithms Computer Methods in Applied Mechanics and Engineering. 86: 245-262. DOI: 10.1016/0045-7825(91)90129-T |
0.323 |
|
1991 |
Lee S, Dulikravich GS. Magnetohydrodynamic steady flow computations in three dimensions International Journal For Numerical Methods in Fluids. 13: 917-936. DOI: 10.1002/Fld.1650130709 |
0.439 |
|
1990 |
Dulikravich GS, Mortara KW, Marraffa L. Physically consistent models for artificial dissipation in transonic potential flow computations Computer Methods in Applied Mechanics and Engineering. 79: 309-320. DOI: 10.1016/0045-7825(90)90066-U |
0.31 |
|
1989 |
Marraffa L, Dulikravich GS, Deiwert GS. Numerical simulation of unsteady flows generated by dissociating nitrogen diffusion Journal of Thermophysics and Heat Transfer. 3: 254-259. DOI: 10.2514/3.28783 |
0.336 |
|
1989 |
Lee S, Dulikravich GS. Acceleration of iterative algorithms for Euler equations of gasdynamics Aiaa Journal. 28: 939-942. DOI: 10.2514/3.25143 |
0.383 |
|
1989 |
Seungsoo L, Dulikravich GS. Cryopreservation perfusion flow simulation using Navier-Stokes equations☆ Cryobiology. 26: 582. DOI: 10.1016/0011-2240(89)90214-9 |
0.303 |
|
1988 |
Dulikravich GS. Inverse Design and Active Control Concepts in Strong Unsteady Heat Conduction Applied Mechanics Reviews. 41: 270-277. DOI: 10.1115/1.3151899 |
0.344 |
|
1988 |
Dulikravich GS, Kennon SR. Theory of compressible irrotational flows including heat conductivity and longitudinal viscosity Mathematical and Computer Modelling. 10: 583-592. DOI: 10.1016/0895-7177(88)90129-X |
0.353 |
|
1987 |
Niederdrenk P, Sobieczky H, Dulikravich GS. SUPERCRITICAL CASCADE FLOW ANALYSIS WITH SHOCK-BOUNDARY LAYER INTERACTON AND SHOCK-FREE REDESIGN Journal of Turbomachinery. 109: 413-419. DOI: 10.1115/1.3262121 |
0.384 |
|
1987 |
Olling CR, Dulikravich GS. VISCOUS-INVISCID COMPUTATIONS OF TRANSONIC SEPARATED FLOWS OVER SOLID AND POROUS CASCADES Journal of Turbomachinery. 109: 220-228. DOI: 10.1115/1.3262088 |
0.367 |
|
1987 |
Huang CY, Dulikravich GS. Fast iterative algorithms based on optimized explicit time stepping Computer Methods in Applied Mechanics and Engineering. 63: 15-36. DOI: 10.1016/0045-7825(87)90122-8 |
0.364 |
|
1987 |
Hassan AA, Dulikravich GS. HODOGRAPH-BASED METHOD FOR THE DESIGN OF SHOCK-FREE CASCADES International Journal For Numerical Methods in Fluids. 7: 197-213. DOI: 10.1002/Fld.1650070302 |
0.358 |
|
1987 |
Olling CR, Dulikravich GS. Porous aerofoil analysis using viscous‐inviscid coupling at transonic speeds International Journal For Numerical Methods in Fluids. 7: 103-129. DOI: 10.1002/Fld.1650070203 |
0.328 |
|
1986 |
Kennon SR, Dulikravich GS. Generation of computational grids using optimization Aiaa Journal. 24: 1069-1073. DOI: 10.2514/3.9393 |
0.343 |
|
1986 |
Chiang T, Dulikravich GS. Inverse Design of Composite Turbine Blade Circular Coolant Flow Passages Journal of Turbomachinery. 108: 275-282. DOI: 10.1115/1.3262048 |
0.375 |
|
1986 |
Chiang TL, Dulikravich GS. INVERSE DESIGN OF COMPOSITE TURBINE BLADE CIRCULAR COOLANT FLOW PASSAGES Journal of Turbomachinery. 108: 275-282. DOI: 10.1115/1.3262048 |
0.47 |
|
1986 |
Huang CY, Kennon SR, Dulikravich GS. Generalized nonlinear minimal residual (GNLMR) method for iterative algorithms Journal of Computational and Applied Mathematics. 16: 215-232. DOI: 10.1016/0377-0427(86)90093-2 |
0.347 |
|
1986 |
Carcaillet R, Dulikravich GS, Kennon SR. Generation of solution-adaptive computational grids using optimization Computer Methods in Applied Mechanics and Engineering. 57: 279-295. DOI: 10.1016/0045-7825(86)90142-8 |
0.37 |
|
1986 |
Chung-Yuan H, Dulikravich GS. Stream function and stream-function-coordinate (SFC) formulation for inviscid flow field calculations Computer Methods in Applied Mechanics and Engineering. 59: 155-177. DOI: 10.1016/0045-7825(86)90100-3 |
0.349 |
|
1986 |
Hayes LJ, Kennon SR, Dulikravich GS. Grid orthogonalization for curvilinear alternating-direction techniques Computer Methods in Applied Mechanics and Engineering. 59: 141-154. DOI: 10.1016/0045-7825(86)90099-X |
0.332 |
|
1986 |
Kennon SR, Dulikravich GS. Inverse design of multiholed internally cooled turbine blades International Journal For Numerical Methods in Engineering. 22: 363-375. DOI: 10.1002/Nme.1620220206 |
0.478 |
|
1985 |
Carcaillet R, Kennon SR, Dulikravich GS. Optimization Of Three-Dimensional Computational Grids Journal of Aircraft. 23: 415-421. DOI: 10.2514/3.45323 |
0.362 |
|
1984 |
Kennon SR, Dulikravich GS. Optimum acceleration factors for iterative solution of linear and nonlinear differential systems Computer Methods in Applied Mechanics and Engineering. 47: 357-367. DOI: 10.1016/0045-7825(84)90084-7 |
0.321 |
|
Show low-probability matches. |