Year |
Citation |
Score |
2018 |
Mousa S, Abd-Elhady AA, Kim G, Sallam HEM. Fracture behavior of roll bonded Al-brass-Al multilayer composites – Concept of the maximum undamaged defect size (dmax) Procedia Structural Integrity. 13: 686-693. DOI: 10.1016/J.Prostr.2018.12.114 |
0.314 |
|
2018 |
Mousa S, Scheirer N, Kim G. Roll-bonding of metal-polymer-metal sandwich composites reinforced by glass whiskers at the interface Journal of Materials Processing Technology. 255: 463-469. DOI: 10.1016/J.Jmatprotec.2017.12.039 |
0.311 |
|
2015 |
Bastwros M, Kim G. Fabrication of Aluminum–SiC Laminate Nanocomposite by Ultrasonic Spray Deposited Sheet Bonding Journal of Micro and Nano-Manufacturing. 3: 31005. DOI: 10.1115/1.4030705 |
0.311 |
|
2015 |
Mousa S, Kim GY. Experimental study on warm roll bonding of metal/polymer/metal multilayer composites Journal of Materials Processing Technology. 222: 84-90. DOI: 10.1016/J.Jmatprotec.2015.02.040 |
0.308 |
|
2015 |
Wu Y, Kim GY. Compaction behavior of Al6061 and SiC binary powder mixture in the mushy state Journal of Materials Processing Technology. 216: 484-491. DOI: 10.1016/J.Jmatprotec.2014.10.003 |
0.475 |
|
2014 |
Wang Z, Witthauer A, Zou Q, Kim GY, Faidley L. Control of a Magnetostrictive-Actuator-Based Micromachining System for Optimal High-Speed Microforming Process Ieee/Asme Transactions On Mechatronics. DOI: 10.1109/Tmech.2014.2363787 |
0.651 |
|
2014 |
Witthauer A, Kim GY, Faidley L, Zou Q, Wang Z. Design and characterization of a flextensional stage based on Terfenol-D actuator International Journal of Precision Engineering and Manufacturing. 15: 135-141. DOI: 10.1007/S12541-013-0316-3 |
0.659 |
|
2012 |
Wu Y, Kim GY, Russell AM. Effects of mechanical alloying on an Al6061-CNT composite fabricated by semi-solid powder processing Materials Science and Engineering A. 538: 164-172. DOI: 10.1016/J.Msea.2012.01.025 |
0.486 |
|
2012 |
Wu Y, Kim GY, Russell AM. Mechanical alloying of carbon nanotube and Al6061 powder for metal matrix composites Materials Science and Engineering A. 532: 558-566. DOI: 10.1016/J.Msea.2011.10.121 |
0.48 |
|
2012 |
Yao Z, Kim GY, Faidley L, Zou Q, Mei D, Chen Z. Effects of superimposed high-frequency vibration on deformation of aluminum in micro/meso-scale upsetting Journal of Materials Processing Technology. 212: 640-646. DOI: 10.1016/J.Jmatprotec.2011.10.017 |
0.329 |
|
2011 |
Yao Z, Kim GY, Faidley LA, Zou Q, Mei D, Chen Z. Experimental study of high-frequency vibration assisted micro/meso-scale forming of metallic materials Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 1: 465-474. DOI: 10.1115/1.4004612 |
0.342 |
|
2011 |
Wu Y, Kim G. Compaction behavior of Al6061 powder in the semi-solid state Powder Technology. 214: 252-258. DOI: 10.1016/J.Powtec.2011.08.017 |
0.474 |
|
2011 |
Wu Y, Kim G. Carbon nanotube reinforced aluminum composite fabricated by semi-solid powder processing Journal of Materials Processing Technology. 211: 1341-1347. DOI: 10.1016/J.Jmatprotec.2011.03.007 |
0.484 |
|
2010 |
Witthauer AT, Faidley LE, Kim GY. Bulk motion for ultrasonic-assisted microforming using Terfenol-D Proceedings of Spie - the International Society For Optical Engineering. 7645. DOI: 10.1117/12.848287 |
0.66 |
|
2010 |
Wu Y, Kim G, Anderson IE, Lograsso TA. Experimental Study on Viscosity and Phase Segregation of Al–Si Powders in Microsemisolid Powder Forming Journal of Manufacturing Science and Engineering-Transactions of the Asme. 132: 11003. DOI: 10.1115/1.4000636 |
0.487 |
|
2010 |
Wang Z, Zou Q, Faidley L, Kim GY. Dynamic compensation and rapid resonance identification in ultrasonic-vibration-assisted microforming system using magnetostrictive actuator Asme 2010 Dynamic Systems and Control Conference, Dscc2010. 1: 21-28. DOI: 10.1109/Tmech.2011.2116032 |
0.322 |
|
2010 |
Wu Y, Kim G, Anderson IE, Lograsso TA. Fabrication of Al6061 composite with high SiC particle loading by semi-solid powder processing Acta Materialia. 58: 4398-4405. DOI: 10.1016/J.Actamat.2010.04.036 |
0.51 |
|
Show low-probability matches. |