| Year |
Citation |
Score |
| 2013 |
Shim JH, Kang S, Cha SW, Lee W, Kim YB, Park JS, Gür TM, Prinz FB, Chao CC, An J. Atomic layer deposition of thin-film ceramic electrolytes for high-performance fuel cells Journal of Materials Chemistry A. 1: 12695-12705. DOI: 10.1039/C3Ta11399J |
0.559 |
|
| 2012 |
Heo P, Kim TY, Ha J, Choi KH, Chang H, Kang S. Intermediate-temperature fuel cells with amorphous Sn0.9In0.1P2O7 thin film electrolytes Journal of Power Sources. 198: 117-121. DOI: 10.1016/J.Jpowsour.2011.09.094 |
0.435 |
|
| 2012 |
Park J, Seo Y, Kang S, You D, Cho H, Na Y. Operational characteristics of the direct methanol fuel cell stack on fuel and energy efficiency with performance and stability International Journal of Hydrogen Energy. 37: 5946-5957. DOI: 10.1016/J.Ijhydene.2011.12.066 |
0.363 |
|
| 2011 |
Kim YB, Gür TM, Jung HJ, Kang S, Sinclair R, Prinz FB. Effect of crystallinity on proton conductivity in yttrium-doped barium zirconate thin films Solid State Ionics. 198: 39-46. DOI: 10.1016/J.Ssi.2011.07.004 |
0.333 |
|
| 2011 |
Kim YB, Gür TM, Kang S, Jung HJ, Sinclair R, Prinz FB. Crater patterned 3-D proton conducting ceramic fuel cell architecture with ultra thin Y:BaZrO3 electrolyte Electrochemistry Communications. 13: 403-406. DOI: 10.1016/J.Elecom.2011.02.004 |
0.41 |
|
| 2011 |
Kang S, Heo P, Lee YH, Ha J, Chang I, Cha S. Low intermediate temperature ceramic fuel cell with Y-doped BaZrO3 electrolyte and thin film Pd anode on porous substrate Electrochemistry Communications. 13: 374-377. DOI: 10.1016/J.Elecom.2011.01.029 |
0.545 |
|
| 2010 |
Jee Y, Chang I, Son JW, Lee JH, Kang S, Cha SW. Fabrication of thin solid oxide film fuel cells Journal of the Korean Ceramic Society. 47: 82-85. DOI: 10.4191/Kcers.2010.47.1.082 |
0.566 |
|
| 2010 |
Pak C, Kang S, Suk Choi Y, Change H. Nanomaterials and structures for the fourth innovation of polymer electrolyte fuel cell Journal of Materials Research. 25: 2063-2071. DOI: 10.1557/Jmr.2010.0280 |
0.348 |
|
| 2010 |
Chung J, Heo S, Song S, Kim J, Kang S, Choi KH. Measuring Methanol Concentrations in a Vapor-Fed Direct Methanol Fuel Cell Using Laser Absorption Spectroscopy Journal of the Electrochemical Society. 157. DOI: 10.1149/1.3273084 |
0.331 |
|
| 2010 |
Chung J, Heo S, Song S, Kim J, Kang S, Choi K. Real-time, In situ Measurement of Fuel and Crossover Methanol Vapor Concentration of a Vapor-Fed Passive Direct Methanol Fuel Cell Using Laser Absorption Spectroscopy Japanese Journal of Applied Physics. 49: 22401. DOI: 10.1143/Jjap.49.022401 |
0.359 |
|
| 2010 |
Park JS, Kim YB, Shim JH, Kang S, Gür TM, Prinz FB. Evidence of proton transport in atomic layer deposited yttria-stabilized zirconia films Chemistry of Materials. 22: 5366-5370. DOI: 10.1021/Cm1017536 |
0.427 |
|
| 2009 |
Shim JH, Park JS, An J, Gür TM, Kang S, Prinz FB. Intermediate-temperature ceramic fuel cells with thin film yttrium-doped barium zirconate electrolytes Chemistry of Materials. 21: 3290-3296. DOI: 10.1021/Cm900820P |
0.454 |
|
| 2009 |
Chang I, Ha S, Kim S, Kang S, Kim J, Choi K, Cha SW. Operational condition analysis for vapor-fed direct methanol fuel cells Journal of Power Sources. 188: 205-212. DOI: 10.1016/J.Jpowsour.2008.11.058 |
0.522 |
|
| 2008 |
Park J, Lee J, Kang S, Sauk J, Song I. Mass balance research for high electrochemical performance direct methanol fuel cells with reduced methanol crossover at various operating conditions Journal of Power Sources. 178: 181-187. DOI: 10.1016/J.Jpowsour.2007.12.021 |
0.389 |
|
| 2007 |
Kang S, Lee SJ, Chang H. Mass Balance in a Direct Methanol Fuel Cell Journal of the Electrochemical Society. 154: B1179. DOI: 10.1149/1.2777109 |
0.358 |
|
| 2006 |
Kang S, Su PC, Park YI, Saito Y, Prinz FB. Thin-film solid oxide fuel cells on porous nickel substrates with multistage nanohole array Journal of the Electrochemical Society. 153. DOI: 10.1149/1.2164769 |
0.421 |
|
| 2004 |
Liu H, Lee S, Kang S, Edwards CF, Prinz FB. RP of Si3N4 burner arrays via assembly mould SDM Rapid Prototyping Journal. 10: 239-246. DOI: 10.1108/13552540410551360 |
0.377 |
|
| 2002 |
Stampfl J, Liu H, Nam SW, Sakamoto K, Tsuru H, Kang S, Cooper AG, Nickel A, Prinz FB. Rapid prototyping and manufacturing by gelcasting of metallic and ceramic slurries Materials Science and Engineering: A. 334: 187-192. DOI: 10.1016/S0921-5093(01)01800-7 |
0.348 |
|
| 1999 |
Cooper A, Kang S, Kietzman J, Prinz F, Lombardi J, Weiss L. Automated fabrication of complex molded parts using Mold Shape Deposition Manufacturing Materials & Design. 20: 83-89. DOI: 10.1016/S0261-3069(99)00013-8 |
0.569 |
|
| Show low-probability matches. |