| Year |
Citation |
Score |
| 2020 |
Yang T, Liechti KM, Huang R. A multiscale cohesive zone model for rate-dependent fracture of interfaces Journal of the Mechanics and Physics of Solids. 145: 104142. DOI: 10.1016/J.Jmps.2020.104142 |
0.385 |
|
| 2020 |
Dai Z, Lu N, Liechti KM, Huang R. Mechanics at the interfaces of 2D materials: Challenges and opportunities Current Opinion in Solid State & Materials Science. 24: 100837. DOI: 10.1016/J.Cossms.2020.100837 |
0.306 |
|
| 2020 |
Mattos DFVd, Huang R, Liechti KM. The effect of moisture on the nonlinearly viscoelastic behavior of an epoxy Mechanics of Time-Dependent Materials. 1-27. DOI: 10.1007/S11043-020-09446-0 |
0.323 |
|
| 2019 |
Cho JH, Na SR, Park S, Akinwande D, Liechti K, Cullinan M. Controlling the number of layers in graphene using the growth pressure. Nanotechnology. PMID 30780133 DOI: 10.1088/1361-6528/Ab0847 |
0.357 |
|
| 2019 |
Jain S, Liechti KM, Bonnecaze RT. Cohesive zone models to understand the interface mechanics of thin film transfer printing Journal of Applied Physics. 125: 075301. DOI: 10.1063/1.5049804 |
0.464 |
|
| 2019 |
Yang T, Yang X, Huang R, Liechti KM. Rate-dependent traction-separation relations for a silicon/epoxy interface informed by experiments and bond rupture kinetics Journal of the Mechanics and Physics of Solids. 131: 1-19. DOI: 10.1016/J.Jmps.2019.06.013 |
0.394 |
|
| 2019 |
Wu C, Huang R, Liechti KM. Simultaneous extraction of tensile and shear interactions at interfaces Journal of the Mechanics and Physics of Solids. 125: 225-254. DOI: 10.1016/J.Jmps.2018.12.004 |
0.421 |
|
| 2019 |
Jain S, Yang T, Negley M, Na SR, Liechti KM, Bonnecaze RT. A parametric cohesive zone beam theory analysis of mixed-mode graphene transfer International Journal of Adhesion and Adhesives. 89: 129-138. DOI: 10.1016/J.Ijadhadh.2018.12.004 |
0.424 |
|
| 2019 |
Liechti K. Characterizing the Interfacial Behavior of 2D Materials: a Review Experimental Mechanics. 59: 395-412. DOI: 10.1007/S11340-019-00475-6 |
0.353 |
|
| 2019 |
Xu C, Yang T, Kang Y, Li Q, Xue T, Liechti KM, Huang R, Qiu W. Rate‐Dependent Decohesion Modes in Graphene‐Sandwiched Interfaces Advanced Materials Interfaces. 6: 1901217. DOI: 10.1002/Admi.201901217 |
0.305 |
|
| 2017 |
Na SR, Kim Y, Lee C, Liechti KM, Suk JW. Adhesion and Self-Healing between Monolayer Molybdenum Disulfide and Silicon Oxide. Scientific Reports. 7: 14740. PMID 29116198 DOI: 10.1038/S41598-017-14921-9 |
0.367 |
|
| 2017 |
Wu C, Huang R, Liechti KM. Characterizing Interfacial Sliding of Through-Silicon-Via by Nano-Indentation Ieee Transactions On Device and Materials Reliability. 17: 355-363. DOI: 10.1109/Tdmr.2017.2681580 |
0.409 |
|
| 2017 |
Jain S, Na SR, Liechti KM, Bonnecaze RT. A cohesive zone model and scaling analysis for mixed-mode interfacial fracture International Journal of Solids and Structures. 129: 167-176. DOI: 10.1016/J.Ijsolstr.2017.09.002 |
0.422 |
|
| 2016 |
Walker ES, Na SR, Jung D, March SD, Kim JS, Trivedi T, Li W, Tao L, Lee ML, Liechti KM, Akinwande D, Bank SR. Large-Area Dry Transfer of Single-Crystalline Epitaxial Bismuth Thin Films. Nano Letters. PMID 27775368 DOI: 10.1021/Acs.Nanolett.6B02931 |
0.318 |
|
| 2016 |
Na SR, Wang X, Piner RD, Huang R, Willson CG, Liechti KM. Cracking of Polycrystalline Graphene on Copper Under Tension. Acs Nano. PMID 27652909 DOI: 10.1021/Acsnano.6B05101 |
0.362 |
|
| 2016 |
Wang P, Liechti KM, Huang R. Snap Transitions of Pressurized Graphene Blisters Journal of Applied Mechanics, Transactions Asme. 83. DOI: 10.1115/1.4033305 |
0.313 |
|
| 2016 |
Cao Z, Tao L, Akinwande D, Huang R, Liechti KM. Mixed-mode traction-separation relations between graphene and copper by blister tests International Journal of Solids and Structures. 84: 147-159. DOI: 10.1016/J.Ijsolstr.2016.01.023 |
0.362 |
|
| 2016 |
Na SR, Sarceno DA, Liechti KM. Ultra long-range interactions between silicon surfaces International Journal of Solids and Structures. 80: 168-180. DOI: 10.1016/J.Ijsolstr.2015.11.001 |
0.381 |
|
| 2016 |
Suk JW, Na SR, Stromberg RJ, Stauffer D, Lee J, Ruoff RS, Liechti KM. Probing the adhesion interactions of graphene on silicon oxide by nanoindentation Carbon. 103: 63-72. DOI: 10.1016/J.Carbon.2016.02.079 |
0.32 |
|
| 2016 |
Wu C, Gowrishankar S, Huang R, Liechti KM. On determining mixed-mode traction–separation relations for interfaces International Journal of Fracture. 202. DOI: 10.1007/S10704-016-0128-4 |
0.473 |
|
| 2016 |
Jain S, Na SR, Liechti KM, Bonnecaze RT. Characteristic scaling equations for softening interactions between beams International Journal of Fracture. 1-9. DOI: 10.1007/S10704-016-0106-X |
0.384 |
|
| 2015 |
Liechti KM. Materials science. Understanding friction in layered materials. Science (New York, N.Y.). 348: 632-3. PMID 25953991 DOI: 10.1126/Science.Aab0930 |
0.38 |
|
| 2015 |
Na SR, Suk JW, Tao L, Akinwande D, Ruoff RS, Huang R, Liechti KM. Selective mechanical transfer of graphene from seed copper foil using rate effects. Acs Nano. 9: 1325-35. PMID 25646863 DOI: 10.1021/Nn505178G |
0.308 |
|
| 2015 |
Cao Z, Tao L, Akinwande D, Huang R, Liechti KM. Mixed-mode interactions between graphene and substrates by blister tests Journal of Applied Mechanics, Transactions Asme. 82. DOI: 10.1115/1.4030591 |
0.392 |
|
| 2015 |
Gao W, Liechti KM, Huang R. Wet adhesion of graphene Extreme Mechanics Letters. 3: 130-140. DOI: 10.1016/J.Eml.2015.04.003 |
0.303 |
|
| 2015 |
Suk JW, Mancevski V, Hao Y, Liechti KM, Ruoff RS. Fracture of polycrystalline graphene membranes by in situ nanoindentation in a scanning electron microscope Physica Status Solidi - Rapid Research Letters. 9: 564-569. DOI: 10.1002/Pssr.201510244 |
0.31 |
|
| 2014 |
Na SR, Suk JW, Ruoff RS, Huang R, Liechti KM. Ultra long-range interactions between large area graphene and silicon. Acs Nano. 8: 11234-42. PMID 25317979 DOI: 10.1021/Nn503624F |
0.325 |
|
| 2014 |
Gao W, Xiao P, Henkelman G, Liechti KM, Huang R. Interfacial adhesion between graphene and silicon dioxide by density functional theory with van der Waals corrections Journal of Physics D: Applied Physics. 47. DOI: 10.1088/0022-3727/47/25/255301 |
0.334 |
|
| 2014 |
Mauchien TK, Liechti KM. A fracture analysis of cathodic delamination at polyurea/steel interfaces International Journal of Adhesion and Adhesives. 51: 23-31. DOI: 10.1016/J.Ijadhadh.2014.02.004 |
0.392 |
|
| 2014 |
Sultana S, Bhasin A, Liechti KM. Rate and confinement effects on the tensile strength of asphalt binder Construction and Building Materials. 53: 604-611. DOI: 10.1016/J.Conbuildmat.2013.12.004 |
0.417 |
|
| 2014 |
Cao Z, Wang P, Gao W, Tao L, Suk JW, Ruoff RS, Akinwande D, Huang R, Liechti KM. A blister test for interfacial adhesion of large-scale transferred graphene Carbon. 69: 390-400. DOI: 10.1016/J.Carbon.2013.12.041 |
0.333 |
|
| 2014 |
Motamed A, Bhasin A, Liechti KM. Using the poker-chip test for determining the bulk modulus of asphalt binders Mechanics of Time-Dependent Materials. 18: 197-215. DOI: 10.1007/S11043-013-9222-4 |
0.321 |
|
| 2013 |
Wang P, Gao W, Cao Z, Liechti KM, Huang R. Numerical analysis of circular graphene bubbles Journal of Applied Mechanics, Transactions Asme. 80. DOI: 10.1115/1.4024169 |
0.302 |
|
| 2013 |
Albrecht AB, Liechti KM, Ravi-Chandar K. Characterization of the Transient Response of Polyurea Experimental Mechanics. 53: 113-122. DOI: 10.1007/S11340-012-9663-8 |
0.303 |
|
| 2013 |
Liechti KM, Na SR, Wakamatsu M, Seitz O, Chabal Y. A High Vacuum Fracture Facility for Molecular Interactions Experimental Mechanics. 53: 231-241. DOI: 10.1007/S11340-012-9625-1 |
0.438 |
|
| 2013 |
Motamed A, Bhasin A, Liechti KM. Constitutive modeling of the nonlinearly viscoelastic response of asphalt binders; Incorporating three-dimensional effects Mechanics of Time-Dependent Materials. 17: 83-109. DOI: 10.1007/S11043-012-9178-9 |
0.363 |
|
| 2012 |
Chevellard G, Ravi-Chandar K, Liechti KM. Modeling the nonlinear viscoelastic behavior of polyurea using a distortion modified free volume approach Mechanics of Time-Dependent Materials. 16: 181-203. DOI: 10.1007/S11043-011-9146-9 |
0.311 |
|
| 2012 |
Motamed A, Bhasin A, Liechti KM. Interaction nonlinearity in asphalt binders Mechanics of Time-Dependent Materials. 16: 145-167. DOI: 10.1007/S11043-011-9141-1 |
0.376 |
|
| 2012 |
Gowrishankar S, Mei H, Liechti KM, Huang R. A comparison of direct and iterative methods for determining traction-separation relations International Journal of Fracture. 177: 109-128. DOI: 10.1007/S10704-012-9758-3 |
0.383 |
|
| 2012 |
Xu D, Liechti KM, Yang D, McNalley J. A Moiré-deflectometry based bulge/contact test for transparent thin films Conference Proceedings of the Society For Experimental Mechanics Series. 4: 353. |
0.505 |
|
| 2011 |
Morales SA, Albrecht AB, Zhang H, Liechti KM, Ravi-Chandar K. On the dynamics of localization and fragmentation: V. Response of polymer coated Al 6061-O tubes International Journal of Fracture. 172: 161-185. DOI: 10.1007/S10704-011-9654-2 |
0.313 |
|
| 2010 |
Mei H, Gowrishankar S, Liechti KM, Huang R. Initiation and propagation of interfacial delamination in integrated thin-film structures 2010 12th Ieee Intersociety Conference On Thermal and Thermomechanical Phenomena in Electronic Systems, Itherm 2010. DOI: 10.1109/ITHERM.2010.5501290 |
0.359 |
|
| 2010 |
Xu D, Liechti KM. Analytical and experimental study of a circular membrane in Hertzian contact with a rigid substrate International Journal of Solids and Structures. 47: 969-977. DOI: 10.1016/J.Ijsolstr.2009.12.013 |
0.563 |
|
| 2010 |
Xu D, Liechti KM. Bulge testing transparent thin films with Moiré deflectometry Experimental Mechanics. 50: 217-225. DOI: 10.1007/S11340-009-9291-0 |
0.546 |
|
| 2009 |
Xu D, Liechti KM, Ravi-Chandar K. Mechanical probing of icelike water monolayers. Langmuir : the Acs Journal of Surfaces and Colloids. 25: 12870-3. PMID 19845370 DOI: 10.1021/La9023629 |
0.569 |
|
| 2009 |
Zhu Y, Liechti KM, Ravi-Chandar K. Direct extraction of rate-dependent traction-separation laws for polyurea/steel interfaces International Journal of Solids and Structures. 46: 31-51. DOI: 10.1016/J.Ijsolstr.2008.08.019 |
0.425 |
|
| 2008 |
Xu D, Ravi-Chandar K, Liechti KM. On scale dependence in friction: transition from intimate to monolayer-lubricated contact. Journal of Colloid and Interface Science. 318: 507-19. PMID 18001763 DOI: 10.1016/J.Jcis.2007.09.086 |
0.606 |
|
| 2008 |
Lin MW, Hellebusch DJ, Wu K, Kim EK, Lu K, Tao L, Liechti KM, Ekerdt JG, Ho PS, Hu W, Willson CG. Interfacial adhesion studies for step and flash imprint lithography Proceedings of Spie - the International Society For Optical Engineering. 6921. DOI: 10.1117/12.772797 |
0.364 |
|
| 2008 |
Lin MW, Hellebusch DJ, Wu K, Kim EK, Lu KH, Liechti KM, Ekerdt JG, Ho PS, Willson CG. Role of surfactants in adhesion reduction for step and flash imprint lithography Journal of Micro/Nanolithography, Mems, and Moems. 7. DOI: 10.1117/1.2968269 |
0.372 |
|
| 2007 |
Xu D, Liechti KM, Ravi-Chandar K. On the modified Tabor parameter for the JKR-DMT transition in the presence of a liquid meniscus. Journal of Colloid and Interface Science. 315: 772-85. PMID 17720183 DOI: 10.1016/J.Jcis.2007.07.048 |
0.574 |
|
| 2007 |
Xu D, Liechti KM, Ravi-Chandar K. Mesoscale scanning probe tips with subnanometer rms roughness. The Review of Scientific Instruments. 78: 073707. PMID 17672766 DOI: 10.1063/1.2756997 |
0.571 |
|
| 2007 |
Roy S, Wang Y, Park S, Xu D, Liechti KM. A three-dimensional viscoelastic analysis of thin film delamination in a peninsula blister specimen Mechanics of Advanced Materials and Structures. 14: 379-390. DOI: 10.1080/15376490601084657 |
0.599 |
|
| 2007 |
Wang M, Xu D, Ravi-Chandar K, Liechti KM. On the development of a mesoscale friction tester Experimental Mechanics. 47: 123-131. DOI: 10.1007/S11340-006-0653-6 |
0.663 |
|
| 2006 |
Roy S, Wang Y, Park S, Liechti KM. Cohesive layer modeling of time-dependent debond growth in aggressive environments Journal of Engineering Materials and Technology, Transactions of the Asme. 128: 11-17. DOI: 10.1115/1.2127959 |
0.455 |
|
| 2006 |
Wang M, Liechti KM, Srinivasan V, White JM, Rossky PJ, Stone MT. A hybrid continuum-molecular analysis of interfacial force microscope experiments on a self-assembled monolayer Journal of Applied Mechanics, Transactions Asme. 73: 769-777. DOI: 10.1115/1.1943435 |
0.58 |
|
| 2006 |
Mello AW, Liechti KM. The effect of self-assembled monolayers on interfacial fracture Journal of Applied Mechanics, Transactions Asme. 73: 860-870. DOI: 10.1115/1.1940662 |
0.779 |
|
| 2006 |
Xu D, Liechti KM, de Lumley-Woodyear TH. Closed Form Nonlinear Analysis of the Peninsula Blister Test The Journal of Adhesion. 82: 831-866. DOI: 10.1080/00218460600822922 |
0.596 |
|
| 2006 |
Roy S, Vengadassalam K, Wang Y, Park S, Liechti KM. Characterization and modeling of strain assisted diffusion in an epoxy adhesive layer International Journal of Solids and Structures. 43: 27-52. DOI: 10.1016/J.Ijsolstr.2005.06.069 |
0.382 |
|
| 2006 |
Park S, Liechti KM, Roy S. A nonlinear viscoelastic fracture analysis of concrete/FRP delamination in aggressive environments International Journal of Fracture. 142: 9-27. DOI: 10.1007/S10704-006-9017-6 |
0.392 |
|
| 2005 |
Wang M, Liechti KM, Wang Q, White JM. Self-assembled silane monolayers: fabrication with nanoscale uniformity. Langmuir : the Acs Journal of Surfaces and Colloids. 21: 1848-57. PMID 15723481 DOI: 10.1021/La048483Y |
0.553 |
|
| 2005 |
Liechti KM, Mello AW. Self-assembled monolayers and mode-mix dependent tractionseparation laws for intrinsic interfacial fracture 11th International Conference On Fracture 2005, Icf11. 3: 2298-2303. |
0.76 |
|
| 2004 |
Wang M, Liechti KM, White JM, Winter RM. Nanoindentation of polymeric thin films with an interfacial force microscope Journal of the Mechanics and Physics of Solids. 52: 2329-2354. DOI: 10.1016/J.Jmps.2004.03.005 |
0.56 |
|
| 2004 |
Park SJ, Liechti KM, Roy S. Simplified bulk experiments and hygrothermal nonlinear viscoelasticity Mechanics of Time-Dependent Materials. 8: 303-344. DOI: 10.1007/S11043-004-0942-3 |
0.345 |
|
| 2004 |
Mello AW, Liechti KM. A piezoelectric biaxial loading device for interfacial fracture experiments Experimental Mechanics. 44: 495-501. DOI: 10.1007/Bf02427961 |
0.771 |
|
| 2003 |
Arzoumanidis GA, Liechti KM. Linear viscoelastic property measurement and its significance for some nonlinear viscoelasticity models Mechanics Time-Dependent Materials. 7: 209-250. DOI: 10.1023/B:Mtdm.0000007357.18801.13 |
0.324 |
|
| 2002 |
Liechti KM, Arzoumanidis GA, Park SJ. Fatigue fracture of fully saturated bonded joints Journal of Adhesion. 78: 383-411. DOI: 10.1080/00218460212517 |
0.408 |
|
| 2002 |
Swadener JG, Liechti KM, Liang YM. Shear induced toughening in bonded joints: Experiments and analysis International Journal of Fracture. 114: 113-132. DOI: 10.1023/A:1015013618976 |
0.371 |
|
| 2002 |
Liechti KM, Marton B. Delamination of a high-temperature sandwich plate Experimental Mechanics. 42: 206-213. DOI: 10.1007/Bf02410885 |
0.395 |
|
| 2001 |
Liechti KM, Wu JD. Mixed-mode, time-dependent rubber/metal debonding Journal of the Mechanics and Physics of Solids. 49: 1039-1072. DOI: 10.1016/S0022-5096(00)00065-X |
0.436 |
|
| 2001 |
Mohammed I, Liechti KM. The effect of corner angles in bimaterial structures International Journal of Solids and Structures. 38: 4375-4394. DOI: 10.1016/S0020-7683(00)00389-9 |
0.31 |
|
| 2001 |
Arzoumanidis GA, Liechti KM. Mixed-mode fatigue fracture of adhesive joints in harsh environments Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 2: 782-785. |
0.302 |
|
| 2000 |
Hung SC, Liechti KM. Nonlinear multiaxial behavior and failure of fiber-reinforced composites Astm Special Technical Publication. 176-222. DOI: 10.1520/Stp15835S |
0.32 |
|
| 2000 |
Liechti KM, Shirani A, Dillingham RG, Boerio FJ, Weaver SM. Cohesive zone models of polyimide/aluminum interphases Journal of Adhesion. 73: 259-297. DOI: 10.1080/00218460008029309 |
0.345 |
|
| 2000 |
Wu JD, Liechti KM. Multiaxial and time dependent behavior of a filled rubber Mechanics Time-Dependent Materials. 4: 293-331. DOI: 10.1023/A:1026575808632 |
0.317 |
|
| 2000 |
Mohammed I, Liechti KM. Cohesive zone modeling of crack nucleation at bimaterial corners Journal of the Mechanics and Physics of Solids. 48: 735-764. DOI: 10.1016/S0022-5096(99)00052-6 |
0.427 |
|
| 1999 |
Hung SC, Liechti KM. Finite element analysis of the Arcan specimen for fiber reinforced composites under pure shear and biaxial loading Journal of Composite Materials. 33: 1288-1317. DOI: 10.1177/002199839903301402 |
0.34 |
|
| 1999 |
Swadener JG, Liechti KM, Lozanne ALD. The intrinsic toughness and adhesion mechanisms of a glass/epoxy interface Journal of the Mechanics and Physics of Solids. 47: 223-258. DOI: 10.1016/S0022-5096(98)00084-2 |
0.446 |
|
| 1998 |
Swadener JG, Liechti KM. Asymmetric shielding mechanisms in the mixed-mode fracture of a glass/epoxy interface Journal of Applied Mechanics, Transactions Asme. 65: 25-29. DOI: 10.1115/1.2789035 |
0.482 |
|
| 1998 |
Shirani A, Liechti KM. A calibrated fracture process zone model for thin film blistering International Journal of Fracture. 93: 281-314. DOI: 10.1007/978-94-017-2854-6_15 |
0.435 |
|
| 1997 |
Liechti KM, Schnapp ST, Swadener JG. Contact angle and contact mechanics of a glass/epoxy interface International Journal of Fracture. 86: 361-374. DOI: 10.1023/A:1007472628431 |
0.405 |
|
| 1997 |
Hung SC, Liechti KM. An evaluation of the arcan specimen for determining the shear moduli of fiber-reinforced composites Experimental Mechanics. 37: 460-468. DOI: 10.1007/Bf02317314 |
0.321 |
|
| 1996 |
Liang YM, Liechti KM. On the large deformation and localization behavior of an epoxy resin under multiaxial stress states International Journal of Solids and Structures. 33: 1479-1500. DOI: 10.1016/0020-7683(95)00105-0 |
0.334 |
|
| 1995 |
Liang YM, Liechti KM. Toughening mechanisms in mixed-mode interfacial fracture International Journal of Solids and Structures. 32. DOI: 10.1016/0020-7683(94)00171-R |
0.436 |
|
| 1995 |
Kyriakides S, Arseculeratne R, Perry EJ, Liechti KM. On the compressive failure of fiber reinforced composites International Journal of Solids and Structures. 32: 689-738. DOI: 10.1016/0020-7683(94)00157-R |
0.306 |
|
| 1995 |
Watson KA, Liechti KM. Adhesion measurements of printed wiring board assemblies American Society of Mechanical Engineers, Eep. 13: 25-29. |
0.325 |
|
| 1994 |
Liechti KM, Shirani A. Large scale yielding in blister specimens International Journal of Fracture. 67: 21-36. DOI: 10.1007/Bf00032362 |
0.363 |
|
| 1992 |
Liechti KM, Chai YS. Asymmetric Shielding in Interfacial Fracture Under In-Plane Shear Journal of Applied Mechanics. 59: 295-304. DOI: 10.1115/1.2899520 |
0.439 |
|
| 1992 |
Liechti KM, Adamjee W. Mixed-Mode Cathodic Delamination of Rubber from Steel The Journal of Adhesion. 40: 27-45. DOI: 10.1080/00218469208030469 |
0.416 |
|
| 1992 |
Liechti KM, Chai YS, Liang YM. Three-dimensional effects in interfacial crack propagation Experimental Mechanics. 32: 218-224. DOI: 10.1007/Bf02319358 |
0.365 |
|
| 1992 |
Liechti KM, Liang YM. The interfacial fracture characteristics of bimaterial and sandwich blister specimens International Journal of Fracture. 55: 95-114. DOI: 10.1007/Bf00017271 |
0.436 |
|
| 1991 |
Liechti KM, Chai YS. Biaxial loading experiments for determining interfacial fracture toughness Journal of Applied Mechanics, Transactions Asme. 58: 680-687. DOI: 10.1115/1.2897248 |
0.461 |
|
| 1991 |
Liechti KM, Liang YM. Influence of specimen geometry on interfacial fracture resistance measurements American Society of Mechanical Engineers, Applied Mechanics Division, Amd. 130: 1-8. |
0.345 |
|
| 1990 |
Liechti KM, Chai Y. Three Dimensional Effects in Interfacial Crack Growth Applied Mechanics Reviews. 43: S271-S273. DOI: 10.1115/1.3120825 |
0.388 |
|
| 1989 |
Liechti KM, Hayashi T. On the uniformity of stresses in some adhesive deformation specimens The Journal of Adhesion. 29: 167-191. DOI: 10.1080/00218468908026486 |
0.348 |
|
| 1989 |
Liechti KM, Becker EB, Lin C, Miller TH. A fracture analysis of cathodic delamination in rubber to metal bonds International Journal of Fracture. 39: 217-234. DOI: 10.1007/Bf00047451 |
0.395 |
|
| 1988 |
Liechti KM, Freda T. On the use of laminated beams for the determination of pure and mixed-mode fracture properties of structural adhesives American Society of Mechanical Engineers, Materials Division (Publication) Md. 6: 65-77. DOI: 10.1080/00218468908030880 |
0.39 |
|
| 1988 |
Liechti KM, Hanson EC. Nonlinear effects in mixed-mode interfacial delaminations International Journal of Fracture. 36: 199-217. DOI: 10.1007/Bf00035100 |
0.415 |
|
| 1987 |
Liechti KM, Ginsburg D, Hanson EC. A Comparison Between Measurements and Finite Element Predictions of Crack Opening Displacements Near the Front of an Interface Crack The Journal of Adhesion. 23: 123-146. DOI: 10.1080/00218468708075401 |
0.397 |
|
| 1987 |
Lin C, Liechti KM. Similarity Concepts in the Fatigue Fracture of Adhesively Bonded Joints The Journal of Adhesion. 21: 1-24. DOI: 10.1080/00218468708074956 |
0.418 |
|
| 1985 |
Liechti KM. Moiré of crack-opening interferometry in adhesive fracture mechanics Experimental Mechanics. 25: 255-261. DOI: 10.1007/Bf02325095 |
0.398 |
|
| 1985 |
Liechti KM. Residual stresses in plastically encapsulated microelectronic devices Experimental Mechanics. 25: 226-231. DOI: 10.1007/Bf02325091 |
0.308 |
|
| 1982 |
Liechti KM, Knauss WG. Crack propagation at material interfaces: I. Experimental technique to determine crack profiles - Instrumentation is developed to measure crack-opening displacements at the front of interfacial cracks with micrometer resolution while adherend displacement history is prescribed to the same accuracy Experimental Mechanics. 22: 262-269. DOI: 10.1007/Bf02326391 |
0.422 |
|
| 1982 |
Liechti KM, Knauss WG. Crack propagation at material interfaces: II experiments on mode interaction - Optical interferometry is used to examine the validity of linearized field theories and criteria for stationary and propagating interfacial cracks Experimental Mechanics. 22: 383-391. DOI: 10.1007/Bf02325405 |
0.404 |
|
| Show low-probability matches. |