Year |
Citation |
Score |
2016 |
Barraza HJ, Hamidi YK, Aktas L, O’Rear EA, Altan MC. Performance of glass woven fabric composites with admicellar-coated thin elastomeric interphase Composite Interfaces. 1-24. DOI: 10.1080/09276440.2016.1193345 |
0.826 |
|
2013 |
Icduygu MG, Aktas L, Altan MC. Fabrication of composite tiles from poly(ethylene terephthalate) (PET) and micro-marble particles reinforced with glass fiber mats: Comparison of recycled and commercial resin Polymers and Polymer Composites. 21: 171-176. DOI: 10.1177/096739111302100308 |
0.736 |
|
2012 |
Icduygu MG, Aktas L, Altan MC. Characterization of composite tiles fabricated from poly(ethylene terephthalate) and micromarble particles reinforced by glass fiber mats Polymer Composites. 33: 1921-1932. DOI: 10.1002/Pc.22332 |
0.725 |
|
2011 |
Aktas L, Bauman DP, Bowen ST, Saha MC, Altan MC. Effect of distribution media length and multiwalled carbon nanotubes on the formation of voids in VARTM composites Journal of Engineering Materials and Technology, Transactions of the Asme. 133. DOI: 10.1115/1.4004700 |
0.654 |
|
2010 |
Aktas L, Altan MC. Effect of nanoclay content on properties of glass-waterborne epoxy laminates at low clay loading Materials Science and Technology. 26: 626-629. DOI: 10.1179/174328409X428864 |
0.64 |
|
2010 |
Aktas L, Altan MC. Characterization of nanocomposite laminates fabricated from aqueous dispersion of nanoclay Polymer Composites. 31: 620-629. DOI: 10.1002/Pc.20837 |
0.744 |
|
2009 |
Ozcelik O, Aktas L, Altan MC. Thermo-oxidative degradation of graphite/epoxy composite laminates: Modeling and long-term predictions Express Polymer Letters. 3: 797-803. DOI: 10.3144/Expresspolymlett.2009.98 |
0.55 |
|
2009 |
Hamidi YK, Dharmavaram S, Aktas L, Altan MC. Effect of fiber content on void morphology in resin transfer molded E-glass/epoxy composites Journal of Engineering Materials and Technology, Transactions of the Asme. 131: 0210141-02101411. DOI: 10.1115/1.3030944 |
0.834 |
|
2008 |
Hamidi YK, Aktas L, Altan MC. Effect of nanoclay content on void morphology in resin transfer molded composites Journal of Thermoplastic Composite Materials. 21: 141-163. DOI: 10.1177/0892705707083635 |
0.838 |
|
2008 |
Aktas L, Dharmavaram S, Hamidi YK, Altan MC. Filtration and breakdown of clay clusters during resin transfer molding of nanoclay/glass/epoxy composites Journal of Composite Materials. 42: 2209-2229. DOI: 10.1177/0021998308094556 |
0.804 |
|
2008 |
Aktas L, Hamidi YK, Altan MC. Dispersion characterization of nanoclay in molded epoxy disks by combined image analysis and wavelength dispersive spectrometry Journal of Engineering Materials and Technology, Transactions of the Asme. 130: 0310051-0310059. DOI: 10.1115/1.2931140 |
0.819 |
|
2007 |
Aktas L, Vu NH, Altan MC. Effect of high temperature exposure on the mechanical properties and moisture absorption kinetics of graphite/epoxy laminates Proceedings of the Materials Division, the Asme Non-Destructive Evaluation Division and the Asme Pressure Vessels and Piping Division, 2006. 79-84. DOI: 10.1115/IMECE2006-15133 |
0.53 |
|
2006 |
Hargis M, Grady BP, Aktas L, Bomireddy KR, Howsman S, Altan MC, Rose T, Rose H. Calorimetric and rheological measurements of three commercial thermosetting prepreg epoxies Journal of Composite Materials. 40: 873-897. DOI: 10.1177/0021998305056380 |
0.566 |
|
2006 |
Aktas L, Cengiz Altan M. Fabrication of laminated nanocomposites by vacuum-assisted deposition of clay onto glass/epoxy prepregs Proceedings of 2006 Multifunctional Nanocomposites International Conference. 2006. |
0.404 |
|
2006 |
Aktas L, Cengiz Altan M. Cure kinetics of nanocomposites prepared from aqueous dispersion of nanoclay Proceedings of 2006 Multifunctional Nanocomposites International Conference. 2006. |
0.425 |
|
2005 |
Aktas L, Hamidi YK, Cengiz Altan M. Edge effects on the determination of fickian diffusivity of polymers American Society of Mechanical Engineers, Materials Division (Publication) Md. 100: 553-562. DOI: 10.1115/Imece2005-80385 |
0.689 |
|
2005 |
Aktas L, Hamidi YK, Cengiz Altan M. Wetting of compacted nanoclay powder by epoxy resin American Society of Mechanical Engineers, Materials Division (Publication) Md. 100: 333-341. DOI: 10.1115/Imece2005-80381 |
0.729 |
|
2005 |
Aktas L, Dharmavaram S, Altan MC. Multiscale characterization of nanocomposites fabricated by copulverizatiqn of epoxy resin and nanoclay American Society of Mechanical Engineers, Materials Division (Publication) Md. 100: 41-48. DOI: 10.1115/Imece2005-80380 |
0.683 |
|
2005 |
Hamidi YK, Aktas L, Altan MC. Three-dimensional features of void morphology in resin transfer molded composites Composites Science and Technology. 65: 1306-1320. DOI: 10.1016/J.Compscitech.2005.01.001 |
0.829 |
|
2005 |
Hamidi YK, Aktas L, Altan MC. Effect of packing on void morphology in resin transfer molded E-glass/ epoxy composites Polymer Composites. 26: 614-627. DOI: 10.1002/Pc.20132 |
0.842 |
|
2005 |
Hamidi YK, Dharmavaram S, Aktas L, Altan MC. Effect of fiber content on void morphology in transfer molded E-glass/epoxy composites American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 261: 3-12. |
0.712 |
|
2004 |
Aktas L, Hamidi YK, Altan MC. Characterisation of nanoclay dispersion in resin transfer moulded glass/nanoclay/epoxy composites Plastics, Rubber and Composites. 33: 267-272. DOI: 10.1179/174328904X4918 |
0.815 |
|
2004 |
Olivero KA, Hamidi YK, Aktas L, Altan MC. Effect of preform thickness and volume fraction on injection pressure and mechanical properties of resin transfer molded composites Journal of Composite Materials. 38: 937-957. DOI: 10.1177/0021998304040562 |
0.756 |
|
2004 |
Barraza HJ, Hamidi YK, Aktas L, O'Rear EA, Altan MC. Porosity reduction in the high-speed processing of glass-fiber composites by Resin Transfer Molding (RTM) Journal of Composite Materials. 38: 195-226. DOI: 10.1177/0021998304038649 |
0.667 |
|
2004 |
Aktas L, Hamidi YK, Altan MC. Dispersion characterization of nanoclay in molded epoxy disks by combined image and electron microbeam analysis American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 260: 19-34. DOI: 10.1115/IMECE2004-61702 |
0.813 |
|
2003 |
Barraza HJ, Aktas L, Hamidi YK, Long J, O'Rear EA, Altan MC. Moisture absorption and wet-adhesion properties of resin transfer molded (RTM) composites containing elastomer-coated glass fibers Journal of Adhesion Science and Technology. 17: 217-242. DOI: 10.1163/156856103762302014 |
0.831 |
|
2003 |
Hamidi YK, Aktas L, Altan MC. Formation of microscopic voids in resin transfer molded composites American Society of Mechanical Engineers, Materials Division (Publication) Md. 98: 65-76. DOI: 10.1115/Imece2003-43837 |
0.839 |
|
2003 |
Aktas L, Hamidi YK, Altan MC. Combined edge and anisotropy effects on fickian mass diffusion in polymer composites American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 259: 27-43. DOI: 10.1115/1.1789959 |
0.744 |
|
2002 |
Aktas L, Hamidi Y, Altan MC. Effect of moisture on the mechanical properties of resin transfer molded composites - Part II: Desorption Journal of Materials Processing and Manufacturing Science. 10: 255-267. DOI: 10.1177/1062065602010004006 |
0.731 |
|
2002 |
Aktas L, Hamidi Y, Altan MC. Effect of moisture on the mechanical properties of resin transfer molded composites - Part I: Absorption Journal of Materials Processing and Manufacturing Science. 10: 239-254. DOI: 10.1177/1062065602010004005 |
0.832 |
|
2002 |
Hamidi Y, Aktas L, Baldwin JD, Altan MC. Static and fatigue strength of resin transfer molded composites Asme International Mechanical Engineering Congress and Exposition, Proceedings. 55-60. DOI: 10.1115/IMECE2002-39695 |
0.818 |
|
2002 |
Aktas L, Hamidi Y, Altan CM. Effect of moisture absorption on mechanical properties of resin transfer molded composites Asme International Mechanical Engineering Congress and Exposition, Proceedings. 173-181. DOI: 10.1115/IMECE2002-39223 |
0.814 |
|
Show low-probability matches. |