Year |
Citation |
Score |
2019 |
Cava WGL, Silva S, Danai K, Spector L, Vanneschi L, Moore JH. Multidimensional genetic programming for multiclass classification Swarm and Evolutionary Computation. 44: 260-272. DOI: 10.1016/J.Swevo.2018.03.015 |
0.303 |
|
2017 |
La Cava WG, Sahare K, Danai K. Restructuring Controllers to Accommodate Plant Nonlinearities Journal of Dynamic Systems, Measurement, and Control. 139. DOI: 10.1115/1.4035870 |
0.341 |
|
2016 |
La Cava WG, Danai K. Gradient-based adaptation of continuous dynamic model structures International Journal of Systems Science. 47: 249-263. DOI: 10.1080/00207721.2015.1069905 |
0.411 |
|
2016 |
La Cava W, Danai K, Spector L, Fleming P, Wright A, Lackner M. Automatic identification of wind turbine models using evolutionary multiobjective optimization Renewable Energy. 87: 892-902. DOI: 10.1016/J.Renene.2015.09.068 |
0.369 |
|
2016 |
La Cava W, Danai K, Spector L. Inference of compact nonlinear dynamic models by epigenetic local search Engineering Applications of Artificial Intelligence. 55: 292-306. DOI: 10.1016/J.Engappai.2016.07.004 |
0.37 |
|
2015 |
La Cava WG, Danai K. Model structure adaptation: A gradient-based approach Asme 2015 Dynamic Systems and Control Conference, Dscc 2015. 1. DOI: 10.1115/DSCC2015-9658 |
0.317 |
|
2015 |
Danai K. Signature-Based Time-Series Analysis for System Identification: Methods That Offer Unique Benefits Ieee Control Systems. 35: 40-70. DOI: 10.1109/Mcs.2015.2449687 |
0.413 |
|
2015 |
Simmons JC, Danai K. Multi-output parameter estimation of dynamic systems by output shapes International Journal of Systems Science. 46: 44-62. DOI: 10.1080/00207721.2014.943822 |
0.625 |
|
2015 |
Teergele J, Danai K. Selection of outputs for distributed parameter systems by identifiability analysis in the time-scale domain International Journal of Systems Science. 46: 2939-2954. DOI: 10.1080/00207721.2014.884251 |
0.387 |
|
2013 |
Danai K, Civjan SA, Styckiewicz MM. Sensor location selection for structures via identifiability analysis in the time-scale domain Journal of Sound and Vibration. 332: 6296-6311. DOI: 10.1016/J.Jsv.2013.06.015 |
0.324 |
|
2012 |
Simmons JC, Danai K. In-flight isolation of degraded engine components by shape comparison of transient outputs Journal of Engineering For Gas Turbines and Power. 134. DOI: 10.1115/1.4005814 |
0.581 |
|
2012 |
Danai K, Civjan SA, Styckiewicz MM. Direct method of damage localization for civil structures via shape comparison of dynamic response measurements Computers and Structures. 92: 297-307. DOI: 10.1016/J.Compstruc.2011.10.016 |
0.339 |
|
2010 |
McCusker JR, Danai K, Kazmer DO. Validation of dynamic models in the time-scale domain Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 132. DOI: 10.1115/1.4002479 |
0.388 |
|
2010 |
Danai K, McCusker JR. Erratum: “Parameter Estimation by Parameter Signature Isolation in the Time-Scale Domain” [Journal of Dynamic Systems, Measurement, and Control, 2009, 131(4), p. 041008] Journal of Dynamic Systems, Measurement, and Control. 133. DOI: 10.1115/1.4002335 |
0.332 |
|
2010 |
McCusker JR, Danai K. Measurement selection for engine transients by parameter signatures Journal of Engineering For Gas Turbines and Power. 132. DOI: 10.1115/1.4001808 |
0.393 |
|
2010 |
McCusker JR, Currier T, Danai K. Improved parameter estimation by noise compensation in the time-scale domain Proceedings of the Asme Dynamic Systems and Control Conference 2009, Dscc2009. 1-8. DOI: 10.1016/J.Sigpro.2010.06.008 |
0.356 |
|
2009 |
Danai K, McCusker JR. Parameter estimation by parameter signature isolation in the time-scale domain Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 131: 1-11. DOI: 10.1115/1.3117197 |
0.372 |
|
2007 |
Dong S, Chunsheng E, Fan B, Danai K, Kazmer DO. Process-driven input profiling for plastics processing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 802-809. DOI: 10.1115/1.2738094 |
0.542 |
|
2005 |
Wang S, Danai K, Wilson M. A probability-based approach to helicopter rotor tuning Journal of the American Helicopter Society. 50: 56-64. DOI: 10.4050/1.3092843 |
0.581 |
|
2005 |
Wang S, Danai K, Wilson M. Adaptive method of helicopter track and balance Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 127: 275-282. DOI: 10.1115/1.1913683 |
0.608 |
|
2004 |
Dong S, Danai K, Malkin S. Continuous optimal infeed control for cylindrical plunge grinding, part 2: Controller design and implementation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 334-340. DOI: 10.1115/1.1751424 |
0.571 |
|
2004 |
Dong S, Danai K, Malkin S, Deshmukh A. Continuous optimal infeed control for cylindrical plunge grinding, part 1: Methodology Journal of Manufacturing Science and Engineering, Transactions of the Asme. 126: 327-333. DOI: 10.1115/1.1751423 |
0.538 |
|
2003 |
Gan C, Danai K. Fault Diagnosis with a Model-Based Recurrent Neural Network Ifac Proceedings Volumes. 36: 699-704. DOI: 10.1016/S1474-6670(17)36574-6 |
0.553 |
|
2002 |
Wang S, Danai K. A forward approach for helicopter track and balance Asme International Mechanical Engineering Congress and Exposition, Proceedings. 255-262. DOI: 10.1115/IMECE2002-33453 |
0.315 |
|
2001 |
Yang D, Danai K, Kazmer D. A knowledge-based tuning method for injection molding machines Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 682-691. DOI: 10.1115/1.1382596 |
0.403 |
|
2001 |
Gan C, Danai K. Nonlinear state estimation by adaptive embedded RBF modules Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 123: 44-48. DOI: 10.1115/1.1341198 |
0.592 |
|
2001 |
Yang D, Danai K, Krishnamurty S. Knowledge-Based Interval Modeling Method for Efficient Global Optimization Journal of Design and Manufacturing Automation. 1: 67-80. DOI: 10.1080/15320370108500202 |
0.431 |
|
2000 |
Gan C, Danai K. Model-based recurrent neural network for modeling nonlinear dynamic systems. Ieee Transactions On Systems, Man, and Cybernetics. Part B, Cybernetics : a Publication of the Ieee Systems, Man, and Cybernetics Society. 30: 344-51. PMID 18244760 DOI: 10.1109/3477.836382 |
0.497 |
|
1999 |
Wang K, Yang D, Danai K, Lewicki DG. Model-based selection of accelerometer locations for helicopter gearbox monitoring Journal of the American Helicopter Society. 44: 269-275. DOI: 10.4050/Jahs.44.269 |
0.377 |
|
1998 |
Ivester R, Danai K. Automatic tuning and regulation of injection molding by the virtual search method Journal of Manufacturing Science and Engineering, Transactions of the Asme. 120: 323-329. DOI: 10.1115/1.2830130 |
0.41 |
|
1998 |
Jammu VB, Danai K, Lewicki DG. Experimental evaluation of a structure-based connectionist network for fault diagnosis of helicopter gearboxes Journal of Mechanical Design, Transactions of the Asme. 120: 106-112. DOI: 10.1115/1.2826660 |
0.355 |
|
1998 |
Jammu VB, Danai K, Lewicki DG. Structure-based connectionist network for fault diagnosis of helicopter gearboxes Journal of Mechanical Design, Transactions of the Asme. 120: 100-105. DOI: 10.1115/1.2826659 |
0.352 |
|
1997 |
Ivester R, Danai K, Malkin S. Cycle-time reduction in machining by Recursive Constraint Bounding Journal of Manufacturing Science and Engineering, Transactions of the Asme. 119: 201-207. DOI: 10.1115/1.2831096 |
0.394 |
|
1996 |
Danai K, Jammu VB. Robust Residual Generation for Fault Diagnosis Thru Pattern Classification Ifac Proceedings Volumes. 29: 6512-6517. DOI: 10.1016/S1474-6670(17)58727-3 |
0.372 |
|
1995 |
Taitel HJ, Danai K, Gauthier D. Helicopter Track and Balance With Artificial Neural Nets Journal of Dynamic Systems, Measurement, and Control. 117: 226-231. DOI: 10.1115/1.2835183 |
0.344 |
|
1995 |
Chin H, Danai K, Lewicki DG. Fault detection of helicopter gearboxes using the multi-valued influence matrix method Journal of Mechanical Design, Transactions of the Asme. 117: 248-253. DOI: 10.1115/1.2826130 |
0.326 |
|
1994 |
Colgan J, Chin H, Danai K, Hayashi SR. On-line tool breakage detection in turning: a multi-sensor method Journal of Engineering For Industry. 116: 117-122. DOI: 10.1115/1.2901801 |
0.333 |
|
1993 |
Xiao G, Malkin S, Danai K. Autonomous System for Multistage Cylindrical Grinding Journal of Dynamic Systems, Measurement, and Control. 115: 667-672. DOI: 10.1115/1.2899194 |
0.351 |
|
1993 |
Chin H, Danai K, Lewicki DG. Efficient fault diagnosis of helicopter gearboxes Ifac Proceedings Volumes. 26: 593-596. DOI: 10.1016/S1474-6670(17)49012-4 |
0.329 |
|
1993 |
Jammu VB, Danai K, Malkin S. Unsupervised Neural Network for Tool Breakage Detection in Turning Cirp Annals - Manufacturing Technology. 42: 67-70. DOI: 10.1016/S0007-8506(07)62393-2 |
0.328 |
|
1993 |
Chin H, Danai K, Lewicki DG. Pattern classifier for fault diagnosis of helicopter gearboxes Control Engineering Practice. 1: 771-778. DOI: 10.1016/0967-0661(93)90243-K |
0.328 |
|
1992 |
Danai K, Nair R, Malkin S. An improved model for force transients in turning Journal of Engineering For Industry. 114: 400-403. DOI: 10.1115/1.2900690 |
0.34 |
|
1992 |
Nair R, Danai K, Malkin S. Turning process identification through force transients Journal of Engineering For Industry. 114: 1-7. DOI: 10.1115/1.2899754 |
0.349 |
|
1991 |
Chin H, Danai K. A Method of Fault Signature Extraction for Improved Diagnosis Journal of Dynamic Systems, Measurement, and Control. 113: 634-638. DOI: 10.1115/1.2896468 |
0.32 |
|
1991 |
Danai K, Chin H. Fault Diagnosis With Process Uncertainty Journal of Dynamic Systems, Measurement, and Control. 113: 339-343. DOI: 10.1115/1.2896416 |
0.35 |
|
1991 |
Koren Y, Ko T, Ulsoy AG, Danai K. Flank Wear Estimation Under Varying Cutting Conditions Journal of Dynamic Systems, Measurement, and Control. 113: 300-307. DOI: 10.1115/1.2896379 |
0.57 |
|
1987 |
Danai K, Ulsoy AG. DYNAMIC STATE MODEL FOR ON-LINE TOOL WEAR ESTIMATION IN TURNING Journal of Engineering For Industry. 109: 396-399. DOI: 10.1115/1.3187145 |
0.611 |
|
1987 |
Danai K, Galip Ulsoy A. An adaptive observer for on-line tool wear estimation in turning, Part II: Results Mechanical Systems and Signal Processing. 1: 227-240. DOI: 10.1016/0888-3270(87)90072-0 |
0.351 |
|
1987 |
Danai K, Ulsoy AG. An adaptive observer for on-line tool wear estimation in turning, Part I: Theory Mechanical Systems and Signal Processing. 1: 211-225. DOI: 10.1016/0888-3270(87)90072-0 |
0.35 |
|
1986 |
Koren Y, Ulsoy AG, Danai K. Tool Wear and Breakage Detection Using a Process Model Cirp Annals - Manufacturing Technology. 35: 283-288. DOI: 10.1016/S0007-8506(07)61889-7 |
0.607 |
|
Show low-probability matches. |