| Year |
Citation |
Score |
| 2020 |
Zhou S, Dhupia JS. Online adaptive water management fault diagnosis of PEMFC based on orthogonal linear discriminant analysis and relevance vector machine International Journal of Hydrogen Energy. 45: 7005-7014. DOI: 10.1016/J.Ijhydene.2019.12.193 |
0.319 |
|
| 2019 |
Li S, Mace BR, Dhupia JS. Modal approach to dynamic analysis of structures with attachments at uncertain locations Journal of Sound and Vibration. 444: 48-68. DOI: 10.1016/J.Jsv.2018.12.008 |
0.331 |
|
| 2018 |
Zhang L, Dhupia JS, Wu M. Analysis and comparison of control strategies for normal adjustment of a robotic drilling end-effector Journal of Vibroengineering. 20: 2651-2667. DOI: 10.21595/Jve.2018.19892 |
0.347 |
|
| 2018 |
Mostashiri N, Dhupia JS, Verl AW, Xu W. Erratum to “A Review of Research Aspects of Redundantly Actuated Parallel Robots for Enabling Further Applications” Ieee-Asme Transactions On Mechatronics. 1-1. DOI: 10.1109/Tmech.2018.2792450 |
0.316 |
|
| 2017 |
Hong L, Qu Y, Dhupia JS, Sheng S, Tan Y, Zhou Z. A novel vibration-based fault diagnostic algorithm for gearboxes under speed fluctuations without rotational speed measurement Mechanical Systems and Signal Processing. 94: 14-32. DOI: 10.1016/J.Ymssp.2017.02.024 |
0.394 |
|
| 2016 |
Hong L, Girsang IP, Dhupia JS. Identification and control of stick-slip vibrations using Kalman estimator in oil-well drill strings Journal of Petroleum Science and Engineering. 140: 119-127. DOI: 10.1016/J.Petrol.2016.01.017 |
0.416 |
|
| 2015 |
Zhang J, Dhupia JS, Gajanayake CJ. Stator current analysis from electrical machines using resonance residual technique to detect faults in planetary gearboxes Ieee Transactions On Industrial Electronics. 62: 5709-5721. DOI: 10.1109/Tie.2015.2410254 |
0.341 |
|
| 2015 |
Girsang IP, Dhupia JS. Machine tools for machining Handbook of Manufacturing Engineering and Technology. 811-865. DOI: 10.1007/978-1-4471-4670-4_4 |
0.435 |
|
| 2014 |
Girsang IP, Dhupia JS, Muljadi E, Singh M, Pao LY. Gearbox and drivetrain models to study dynamic effects of modern wind turbines Ieee Transactions On Industry Applications. 50: 3777-3786. DOI: 10.1109/Tia.2014.2321029 |
0.305 |
|
| 2014 |
Hong L, Dhupia JS, Sheng S. An explanation of frequency features enabling detection of faults in equally-spaced planetary gearbox Mechanism and Machine Theory. 73: 169-183. DOI: 10.1016/J.Mechmachtheory.2013.10.014 |
0.36 |
|
| 2014 |
Hong L, Dhupia JS. A time domain approach to diagnose gearbox fault based on measured vibration signals Journal of Sound and Vibration. 333: 2164-2180. DOI: 10.1016/J.Jsv.2013.11.033 |
0.359 |
|
| 2013 |
Girsang IP, Dhupia JS. Collective pitch control of wind turbines using stochastic disturbance accommodating control Wind Engineering. 37: 517-533. DOI: 10.1260/0309-524X.37.5.517 |
0.341 |
|
| 2013 |
Girsang IP, Dhupia JS, Muljadi E, Singh M, Jonkman J. Modeling and control to mitigate resonant load in variable-speed wind turbine drivetrain Ieee Journal of Emerging and Selected Topics in Power Electronics. 1: 277-286. DOI: 10.1109/Jestpe.2013.2284096 |
0.309 |
|
| 2012 |
Dhupia JS, Girsang IP. Correlation-Based Estimation Of Cutting Force Coefficients For Ball-End Milling Machining Science and Technology. 16: 287-303. DOI: 10.1080/10910344.2012.673978 |
0.452 |
|
| 2012 |
Saptaji K, Subbiah S, Dhupia JS. Effect of side edge angle and effective rake angle on top burrs in micro-milling Precision Engineering. 36: 444-450. DOI: 10.1016/J.Precisioneng.2012.01.008 |
0.33 |
|
| 2008 |
Powalka B, Dhupia JS, Ulsoy AG, Katz R. Identification of machining force model parameters from acceleration measurements International Journal of Manufacturing Research. 3: 265-284. DOI: 10.1504/Ijmr.2008.019210 |
0.676 |
|
| 2008 |
Dhupia JS, Ulsoy AG, Katz R, Powalka B. Experimental identification of the nonlinear parameters of an industrial translational guide for machine performance evaluation Jvc/Journal of Vibration and Control. 14: 645-668. DOI: 10.1177/1077546307081325 |
0.707 |
|
| 2008 |
Dhupia JS, Galip Ulsoy A, Koren Y. Arch-type reconfigurable machine tool Smart Devices and Machines For Advanced Manufacturing. 219-238. DOI: 10.1007/978-1-84800-147-3_9 |
0.452 |
|
| 2007 |
Dhupia JS, Powalka B, Galip Ulsoy A, Katz R. Effect of a nonlinear joint on the dynamic performance of a machine tool Journal of Manufacturing Science and Engineering, Transactions of the Asme. 129: 943-950. DOI: 10.1115/1.2752830 |
0.723 |
|
| 2007 |
Dhupia J, Powalka B, Katz R, Ulsoy AG. Dynamics of the arch-type reconfigurable machine tool International Journal of Machine Tools and Manufacture. 47: 326-334. DOI: 10.1016/J.Ijmachtools.2006.03.017 |
0.689 |
|
| 2007 |
Dhupia JS, Powalka B, Ulsoy AG, Katz R. Describing function representation from measured nonlinearities in machine joints Transactions of the North American Manufacturing Research Institution of Sme. 35: 263-270. |
0.64 |
|
| Show low-probability matches. |