| Year |
Citation |
Score |
| 2020 |
Bhattacharya D, Cho L, Van der Aa E, Ghassemi-Armaki H, Pichler A, Findley KO, Speer JG. Transgranular Cracking in a Liquid Zn Embrittled High Strength Steel. Scripta Materialia. 175. PMID 32165855 DOI: 10.1016/J.Scriptamat.2019.09.006 |
0.352 |
|
| 2020 |
Speer J, Whitley B, Kaster S, Findley K, Matlock D, Moor ED. Selected Developments In Nb-Microalloyed Forgings For Induction Hardening, And Pearlitic Wire Rod Tecnologia Em Metalurgia, Materiais E MineraçãO. 17: 164-169. DOI: 10.4322/2176-1523.20202325 |
0.314 |
|
| 2020 |
Hosoda T, Clarke KD, Maloy SA, Speer JG, Findley KO. Microstructure Development with Thermomechanical Processing in Alloy MA956 Isij International. 60: 546-555. DOI: 10.2355/Isijinternational.Isijint-2019-131 |
0.461 |
|
| 2020 |
Tenaglia NE, Massone JM, Boeri RE, Speer JG. Effect of microsegregation on carbide-free bainitic transformation in a high-silicon cast steel Materials Science and Technology. 36: 690-698. DOI: 10.1080/02670836.2020.1732076 |
0.475 |
|
| 2020 |
Jo H, Shin C, Moon J, Jang JH, Ha H, Park S, Lee T, Lee BH, Chung J, Speer JG, Findley KO, Jacobs TR, Lee C, Kim S. Mechanisms for improving tensile properties at elevated temperature in fire-resistant steel with Mo and Nb Materials & Design. 194: 108882. DOI: 10.1016/J.Matdes.2020.108882 |
0.51 |
|
| 2020 |
Matlock DK, Kang S, Moor ED, Speer JG. Applications of rapid thermal processing to advanced high strength sheet steel developments Materials Characterization. 166: 110397. DOI: 10.1016/J.Matchar.2020.110397 |
0.574 |
|
| 2020 |
Cho L, Golem L, Seo EJ, Bhattacharya D, Speer JG, Findley KO. Microstructural characteristics and mechanical properties of the Al–Si coating on press hardened 22MnB5 steel Journal of Alloys and Compounds. 846: 156349. DOI: 10.1016/J.Jallcom.2020.156349 |
0.389 |
|
| 2020 |
Euser VK, Clarke AJ, Speer JG. Rapid Tempering: Opportunities and Challenges Journal of Materials Engineering and Performance. 29: 4155-4161. DOI: 10.1007/S11665-020-04946-Z |
0.405 |
|
| 2020 |
Seo EJ, Speer JG, Matlock DK, Cryderman RL. Effect of Mo in Combination with Nb on Austenite Grain Size Control in Vacuum Carburizing Steels Journal of Materials Engineering and Performance. 29: 3575-3584. DOI: 10.1007/S11665-020-04751-8 |
0.483 |
|
| 2020 |
Clarke AJ, Klemm-Toole J, Clarke KD, Coughlin DR, Pierce DT, Euser VK, Poplawsky JD, Clausen B, Brown D, Almer J, Gibbs PJ, Alexander DJ, Field RD, Williamson DL, Speer JG, et al. Perspectives on Quenching and Tempering 4340 Steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 51: 4984-5005. DOI: 10.1007/S11661-020-05972-1 |
0.581 |
|
| 2019 |
Bollinger A, Murakami T, Findley K, De Moor E, Speer J. The Influence of Microstructural Variations on Hydrogen Absorbance and Tensile Properties at Elevated Hydrogen Levels for TRIP-Aided Bainitic Ferrite Steels Corrosion. 75: 888-897. DOI: 10.5006/3105 |
0.399 |
|
| 2019 |
Taub A, Moor ED, Luo A, Matlock DK, Speer JG, Vaidya U. Materials for Automotive Lightweighting Annual Review of Materials Research. 49: 327-359. DOI: 10.1146/Annurev-Matsci-070218-010134 |
0.37 |
|
| 2019 |
Tippey K, Jablonski P, Doğan Ö, Almer J, Hackenberg R, Speer J, Stebner A, Clarke K, Clarke A, Findley K. Effects of alloying and processing modifications on precipitation behavior and elevated temperature strength in 9% Cr ferritic/martensitic steels Materials Science and Engineering: A. 756: 172-183. DOI: 10.1016/J.Msea.2018.11.133 |
0.566 |
|
| 2019 |
Golem L, Cho L, Speer JG, Findley KO. Influence of austenitizing parameters on microstructure and mechanical properties of Al-Si coated press hardened steel Materials & Design. 172: 107707. DOI: 10.1016/J.Matdes.2019.107707 |
0.461 |
|
| 2019 |
Whitley BM, Speer JG, Cryderman R, Klemm-Toole J. Understanding Microstructural Evolution During Rapid Heat Treatment of Microalloyed Steels Through Computational Modeling, Advanced Physical Simulation, and Multiscale Characterization Techniques Journal of Materials Engineering and Performance. 28: 1293-1300. DOI: 10.1007/S11665-019-03903-9 |
0.478 |
|
| 2019 |
Rana R, Moor ED, Speer JG, Matlock DK. Effects of Hot Band Annealing on the Mechanical Properties of Cold-Rolled and Intercritically Annealed Medium Manganese Steels Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 4016-4020. DOI: 10.1007/S11661-019-05363-1 |
0.505 |
|
| 2019 |
Stewart RA, Speer JG, Thomas BG, Moor ED, Clarke AJ. Quenching and Partitioning of Plate Steels: Partitioning Design Methodology Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 4701-4713. DOI: 10.1007/S11661-019-05337-3 |
0.486 |
|
| 2019 |
Euser VK, Williamson DL, Clarke KD, Findley KO, Speer JG, Clarke AJ. Effects of Short-Time Tempering on Impact Toughness, Strength, and Phase Evolution of 4340 Steel Within the Tempered Martensite Embrittlement Regime Metallurgical and Materials Transactions A. 50: 3654-3662. DOI: 10.1007/S11661-019-05271-4 |
0.444 |
|
| 2018 |
Judge VK, Speer JG, Clarke KD, Findley KO, Clarke AJ. Rapid Thermal Processing to Enhance Steel Toughness. Scientific Reports. 8: 445. PMID 29323193 DOI: 10.1038/S41598-017-18917-3 |
0.464 |
|
| 2018 |
Ciganik C, Speer J, Findley K, van Raemdonck W. Effects of Post-Drawing Surface Heat Treatments on the Strength and Torsional Ductility of High Strength Steel Wire Materials Science Forum. 941: 1790-1795. DOI: 10.4028/Www.Scientific.Net/Msf.941.1790 |
0.455 |
|
| 2018 |
Speer JG. 2017 Bessemer lecture: progress in steel product research to advance the industry and society* Ironmaking & Steelmaking. 45: 858-866. DOI: 10.1080/03019233.2018.1543605 |
0.364 |
|
| 2018 |
Rana R, Thomas GA, Moor ED, Speer JG, Matlock DK. Deleterious effects of nitrogen annealing on the mechanical properties of medium manganese steels Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 735: 436-440. DOI: 10.1016/J.Msea.2018.08.067 |
0.456 |
|
| 2018 |
Pierce D, Coughlin D, Clarke K, De Moor E, Poplawsky J, Williamson D, Mazumder B, Speer J, Hood A, Clarke A. Microstructural evolution during quenching and partitioning of 0.2C-1.5Mn-1.3Si steels with Cr or Ni additions Acta Materialia. 151: 454-469. DOI: 10.1016/J.Actamat.2018.03.007 |
0.506 |
|
| 2018 |
Rana R, Moor ED, Speer JG, Matlock DK. On the Importance of Adiabatic Heating on Deformation Behavior of Medium-Manganese Sheet Steels Jom. 70: 706-713. DOI: 10.1007/S11837-018-2779-2 |
0.488 |
|
| 2018 |
Kang S, Hofer RW, Speer JG, Krizan D, Matlock DK, Moor ED. Intercritical Annealing Response of Medium Manganese Steels Having Different Carbon Concentrations Steel Research International. 89: 1800069. DOI: 10.1002/Srin.201800069 |
0.434 |
|
| 2017 |
Zhang Y, Wang L, Findley KO, Speer JG. Influence of Temperature and Grain Size on Austenite Stability in Medium Manganese Steels Metallurgical and Materials Transactions A. 48: 2140-2149. DOI: 10.1007/S11661-017-3995-Z |
0.472 |
|
| 2016 |
Whitley B, Speer JG, Cryderman R, Goldstein R, Findley K, Matlock DK. Effects of Microalloy Additions and Thermomechanical Processing on Austenite Grain Size Control in Induction-Hardenable Medium Carbon Steel Bar Rolling Materials Science Forum. 879: 2094-2099. DOI: 10.4028/Www.Scientific.Net/Msf.879.2094 |
0.55 |
|
| 2016 |
Speer JG, Araujo AL, Matlock DK, Moor Ed. Nb-Microalloying in Next-Generation Flat-Rolled Steels: An Overview Materials Science Forum. 879: 1834-1840. DOI: 10.4028/Www.Scientific.Net/Msf.879.1834 |
0.471 |
|
| 2016 |
Pierce DT, Coughlin DR, Williamson DL, Kähkönen J, Clarke AJ, Clarke KD, Speer JG, De Moor E. Quantitative investigation into the influence of temperature on carbide and austenite evolution during partitioning of a quenched and partitioned steel Scripta Materialia. 121: 5-9. DOI: 10.1016/j.scriptamat.2016.04.027 |
0.457 |
|
| 2016 |
Kang S, Speer JG, Regier RW, Nako H, Kennett SC, Findley KO. The analysis of bainitic ferrite microstructure in microalloyed plate steels through quantitative characterization of intervariant boundaries Materials Science and Engineering A. 669: 459-468. DOI: 10.1016/J.Msea.2016.05.111 |
0.429 |
|
| 2016 |
Kang S, Speer JG, Krizan D, Matlock DK, De Moor E. Prediction of tensile properties of intercritically annealed Al-containing 0.19C-4.5Mn (wt%) TRIP steels Materials and Design. 97: 138-146. DOI: 10.1016/J.Matdes.2016.02.058 |
0.47 |
|
| 2016 |
de Cooman BC, Lee SJ, Shin S, Seo EJ, Speer JG. Combined Intercritical Annealing and Q&P Processing of Medium Mn Steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-7. DOI: 10.1007/S11661-016-3821-Z |
0.523 |
|
| 2015 |
Kähkönen MJ, Moor ED, Speer J, Thomas G. Carbon and Manganese Effects on Quenching and Partitioning Response of CMnSi-Steels Sae International Journal of Materials and Manufacturing. 8: 419-424. DOI: 10.4271/2015-01-0530 |
0.461 |
|
| 2015 |
Cryderman R, Rickert D, Puzak K, Speer J, Matlock D, Burnett M. Effects of Chemical Composition, Heat Treatment, and Microstructure in Splittable Forged Steel Connecting Rods Sae International Journal of Materials and Manufacturing. 8: 765-773. DOI: 10.4271/2015-01-0522 |
0.442 |
|
| 2015 |
Whitley BM, Araujo AL, Speer JG, Findley KO, Matlock DK. Analysis of microstructure in hot torsion simulation Materials Performance and Characterization. 4: 307-321. DOI: 10.1520/Mpc20150012 |
0.386 |
|
| 2015 |
Speer JG, De Moor E, Clarke AJ. Critical assessment 7: Quenching and partitioning Materials Science and Technology (United Kingdom). 31: 3-9. DOI: 10.1179/1743284714Y.0000000628 |
0.303 |
|
| 2015 |
Pierce DT, Couehlin DR, Williamson DL, Clarke KD, Clarke AJ, Speer JG, Matlock DK, Moor ED. Mössbauer Spectroscopy and Transmission Electron Microscopy Analysis of Transition Carbides in Quenched and Partitioned Steel Microscopy and Microanalysis. 21: 2271-2272. DOI: 10.1017/S1431927615012131 |
0.367 |
|
| 2015 |
Matlock DK, Thomas LS, Taylor MD, Moor ED, Speer JG. Microstructural Developments Leading to New Advanced High Strength Sheet Steels: A Historical Assessment of Critical Metallographic Observations Microscopy and Microanalysis. 21: 5-6. DOI: 10.1017/S1431927615000823 |
0.538 |
|
| 2015 |
Choi KS, Zhu Z, Sun X, De Moor E, Taylor MD, Speer JG, Matlock DK. Determination of carbon distributions in quenched and partitioned microstructures using nanoscale secondary ion mass spectroscopy Scripta Materialia. 104: 79-82. DOI: 10.1016/J.Scriptamat.2015.03.027 |
0.442 |
|
| 2015 |
Pavlina EJ, Van Tyne CJ, Speer JG. Effects of combined silicon and molybdenum alloying on the size and evolution of microalloy precipitates in HSLA steels containing niobium and titanium Materials Characterization. 102: 35-46. DOI: 10.1016/J.Matchar.2015.02.013 |
0.513 |
|
| 2015 |
Kähkönen J, Pierce DT, Speer JG, de Moor E, Thomas GA, Coughlin D, Clarke K, Clarke A. Quenched and Partitioned CMnSi Steels Containing 0.3 wt.% and 0.4 wt.% Carbon Jom. DOI: 10.1007/S11837-015-1620-4 |
0.567 |
|
| 2015 |
Enloe CM, Findley KO, Speer JG. Austenite Grain Growth and Precipitate Evolution in a Carburizing Steel with Combined Niobium and Molybdenum Additions Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5308-5328. DOI: 10.1007/S11661-015-3103-1 |
0.483 |
|
| 2015 |
Rana R, Gibbs PJ, De Moor E, Speer JG, Matlock DK. A composite modeling analysis of the deformation behavior of medium manganese steels Steel Research International. 86: 1139-1150. DOI: 10.1002/Srin.201400577 |
0.421 |
|
| 2015 |
Rothleutner LM, Van Tyne CJ, Glodowski RJ, Speer JG, Matlock DK. Contributions of Vanadium to Properties of Heat Treated Medium Carbon Forging Steels Hsla Steels 2015, Microalloying 2015 and Offshore Engineering Steels 2015 Conference Proceedings. 419-425. DOI: 10.1002/9781119223399.ch48 |
0.351 |
|
| 2015 |
Araujo AL, Speer JG, Thomas GA, De Moor E. Effects of niobium and vanadium on hot-rolled q&p steel microstructures simulated via gleeble Materials Science and Technology Conference and Exhibition 2015, Ms and T 2015. 1: 877-884. |
0.464 |
|
| 2015 |
Kang S, De Moor E, Speer JG, Krizan D. Aluminum alloyed medium manganese steels Ptm 2015 - Proceedings of the International Conference On Solid-Solid Phase Transformations in Inorganic Materials 2015. 1145-1151. |
0.358 |
|
| 2015 |
Pierce DT, Coughlin DR, Williamson DL, Clarke KD, Clarke AJ, Speer JG, Matlock DK, De Moor E. Mössbauer spectroscopy investigation of transition carbides in quenched and partitioned steel Ptm 2015 - Proceedings of the International Conference On Solid-Solid Phase Transformations in Inorganic Materials 2015. 91-98. |
0.334 |
|
| 2015 |
Coughlin DR, Pierce DT, Speer JG, Clarke AJ, Jablonski PD, Dogan ÖN, Judge VK, De Moor E, Clarke KD. Transition carbide formation in a 0.2C-1.54Mn-1.48Cr-1.30Si (Wt. Pct.) quenched and partitioned steel Ptm 2015 - Proceedings of the International Conference On Solid-Solid Phase Transformations in Inorganic Materials 2015. 1051-1058. |
0.469 |
|
| 2015 |
Clarke AJ, Coughlin DR, Miller MK, Field RD, Clarke KD, Powers KA, Gibbs PJ, Papin PA, Judge VK, Pierce DT, Alexander DJ, De Moor E, Speer JG, Krauss G. Microstructural evolution in 4340 steel after Quenching and tempering Ptm 2015 - Proceedings of the International Conference On Solid-Solid Phase Transformations in Inorganic Materials 2015. 1107-1114. |
0.448 |
|
| 2014 |
Regier RW, Reguly A, Matlock DK, Choi JK, Speer JG. Effects of austenite conditioning and transformation temperature on the bainitic microstructure in linepipe steels Materials Science Forum. 783: 85-90. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.85 |
0.569 |
|
| 2014 |
Mukherjee K, Thomas LS, Bos C, Matlock DK, Speer JG. Modification of banding in dual-phase steels via thermal processing Advanced Materials Research. 783: 1067-1072. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.1067 |
0.415 |
|
| 2014 |
Thomas LS, Matlock DK, Speer JG. The effects of heating rate and cold work on the development of dual-phase steel microstructures Advanced Materials Research. 922: 755-760. DOI: 10.4028/Www.Scientific.Net/Amr.922.755 |
0.488 |
|
| 2014 |
Thomas GA, Danoix F, Speer JG, Thompson SW, Cuvilly F. Carbon atom re-distribution during quenching and partitioning Isij International. 54: 2900-2906. DOI: 10.2355/Isijinternational.54.2900 |
0.451 |
|
| 2014 |
Thomas GA, Speer JG. Interface migration during partitioning of Q&P Steel Materials Science and Technology (United Kingdom). 30: 998-1007. DOI: 10.1179/1743284714Y.0000000546 |
0.419 |
|
| 2014 |
Pierce DT, Coughlin DR, Williamson DL, Clarke KD, Clarke AJ, Speer JG, De Moor E. Characterization of transition carbides in quench and partitioned steel microstructures by Mössbauer spectroscopy and complementary techniques Acta Materialia. DOI: 10.1016/j.actamat.2015.01.024 |
0.317 |
|
| 2014 |
Speer JG, Matlock DK, Wang L, Edmonds DV. Quenched and Partitioned Steels Comprehensive Materials Processing. 1: 217-225. DOI: 10.1016/B978-0-08-096532-1.00116-3 |
0.47 |
|
| 2014 |
Yablinsky CA, Tippey KE, Vaynman S, Anderoglu O, Fine ME, Chung YW, Speer JG, Findley KO, Dogan N, Jablonski PD, Maloy SA, Hackenberg RE, Clarke AJ, Clarke KD. Concepts for the Development of Nanoscale Stable Precipitation-Strengthened Steels Manufactured by Conventional Methods Jom. 66: 2467-2475. DOI: 10.1007/S11837-014-1204-8 |
0.539 |
|
| 2014 |
Taylor MD, Matlock DK, De Moor E, Speer JG. Development of a Plane Strain Tensile Geometry to Assess Shear Fracture in Dual Phase Steels Journal of Materials Engineering and Performance. 23: 3685-3694. DOI: 10.1007/S11665-014-1154-X |
0.465 |
|
| 2014 |
Kang S, De Moor E, Speer JG. Retained Austenite Stabilization Through Solute Partitioning During Intercritical Annealing in C-, Mn-, Al-, Si-, and Cr-Alloyed Steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 1005-1011. DOI: 10.1007/s11661-014-2708-0 |
0.344 |
|
| 2014 |
Al-Jabr HM, Speer JG, Matlock DK. Toughness anisotropy in four X70 pipeline steels produced via different rolling practices Materials Science and Technology Conference and Exhibition 2014, Ms and T 2014. 2: 1403-1410. |
0.35 |
|
| 2013 |
Al-Jabr HM, Speer JG, Matlock DK, Zhang P, Cho SH. Anisotropy of mechanical properties of API-X70 spiral welded pipe steels Materials Science Forum. 753: 538-541. DOI: 10.4028/Www.Scientific.Net/Msf.753.538 |
0.513 |
|
| 2013 |
Enloe CM, Findley KO, Parish CM, Miller MK, De Cooman BC, Speer JG. Compositional evolution of microalloy carbonitrides in a Mo-bearing microalloyed steel Scripta Materialia. 68: 55-58. DOI: 10.1016/J.Scriptamat.2012.09.027 |
0.461 |
|
| 2013 |
Richards MD, Burnett ME, Speer JG, Matlock DK. Effects of deformation behavior and processing temperature on the fatigue performance of deep-rolled medium carbon bar steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 270-285. DOI: 10.1007/S11661-012-1371-6 |
0.493 |
|
| 2013 |
Feng W, Wu Z, Wang L, Speer JG. Effect of testing temperature on retained austenite stability of cold rolled CMnSi steels treated by quenching and partitioning process Steel Research International. 84: 246-252. DOI: 10.1002/Srin.201200129 |
0.451 |
|
| 2012 |
De Moor E, Matlock DK, Speer JG, Fojer C, Penning J. Comparison of hole expansion properties of Quench & Partitioned, Quench & tempered and austempered steels Sae Technical Papers. DOI: 10.4271/2012-01-0530 |
0.336 |
|
| 2012 |
Hamre DJ, Matlock DK, Speer JG. Microstructural evolution of ultrafine ferrite during plate steel processing using intermediate cooling Materials Science Forum. 706: 83-88. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.83 |
0.462 |
|
| 2012 |
Ronevich JA, Kim SK, Speer JG, Matlock DK. Hydrogen effects on cathodically charged twinning-induced plasticity steel Scripta Materialia. 66: 956-959. DOI: 10.1016/J.Scriptamat.2011.12.012 |
0.345 |
|
| 2012 |
Pavlina EJ, Speer JG, Van Tyne CJ. Equilibrium solubility products of molybdenum carbide and tungsten carbide in iron Scripta Materialia. 66: 243-246. DOI: 10.1016/J.Scriptamat.2011.10.047 |
0.411 |
|
| 2012 |
Speer JG. Phase transformations in quenched and partitioned steels Phase Transformations in Steels. 2: 247-270. DOI: 10.1016/B978-1-84569-971-0.50008-9 |
0.475 |
|
| 2012 |
Ronevich JA, Speer JG, Krauss G, Matlock DK. Improvement of the Hydrogen Microprint Technique on AHSS Steels Metallography, Microstructure, and Analysis. 1: 79-84. DOI: 10.1007/S13632-012-0015-Y |
0.414 |
|
| 2012 |
De Moor E, Speer JG, Matlock DK, Kwak JH, Lee SB. Quenching and partitioning of CMnSi steels containing elevated manganese levels Steel Research International. 83: 322-327. DOI: 10.1002/Srin.201100318 |
0.434 |
|
| 2012 |
Futch DB, Thomas GA, Speer JG, Findley KO. Thermomechanical simulation of hot rolled Q&P sheet steels Iron and Steel Technology. 9: 101-106. |
0.367 |
|
| 2012 |
Courtney A, Speer JG, De Moor E, Matlock DK. Effect of austenitizing conditions on hardenability of boron-added microalloyed steel Iron and Steel Technology. 9: 111-120. |
0.404 |
|
| 2012 |
Futch DB, Thomas GA, Speer JG, Findley KO. Thermomechanical simulation of hot rolled Q&P sheet steels Iron and Steel Technology. 9: 101-106. |
0.367 |
|
| 2011 |
Thomas G, Speer J, Matlock D, Michael J. Application of Electron Backscatter Diffraction Techniques to Quenched and Partitioned Steels Microscopy and Microanalysis. 17: 368-373. PMID 21281538 DOI: 10.1017/S1431927610094432 |
0.416 |
|
| 2011 |
Bigg TD, Matlock DK, Speer JG, Edmonds DV. Dynamics of the quenching and partitioning (Q&P) process Solid State Phenomena. 172: 827-832. DOI: 10.4028/Www.Scientific.Net/Ssp.172-174.827 |
0.762 |
|
| 2011 |
Santofimia MJ, Speer JG, Zhao L, Sietsma J. Model for the annealing of partial martensite-austenite microstructures in steels Solid State Phenomena. 172: 567-572. DOI: 10.4028/Www.Scientific.Net/Ssp.172-174.567 |
0.524 |
|
| 2011 |
De Moor E, Speer JG, Matlock DK, Kwak JH, Lee SB. Effect of carbon and manganese on the quenching and partitioning response of CMnSi steels Isij International. 51: 137-144. DOI: 10.2355/Isijinternational.51.137 |
0.405 |
|
| 2011 |
Speer JG, De Moor E, Findley KO, Matlock DK, De Cooman BC, Edmonds DV. Analysis of microstructure evolution in quenching and partitioning automotive sheet steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3591-3601. DOI: 10.1007/S11661-011-0869-7 |
0.746 |
|
| 2011 |
Brown TW, Speer JG, Matlock DK, Haezebrouck DM. Nitrogen effects in dual-phase sheet steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3611-3619. DOI: 10.1007/S11661-011-0776-Y |
0.737 |
|
| 2011 |
Gibbs PJ, De Moor E, Merwin MJ, Clausen B, Speer JG, Matlock DK. Austenite stability effects on tensile behavior of manganese-enriched- austenite transformation-induced plasticity steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3691-3702. DOI: 10.1007/S11661-011-0687-Y |
0.392 |
|
| 2011 |
Thomas GA, Speer JG, Matlock DK. Quenched and partitioned microstructures produced via Gleeble simulations of hot-strip mill cooling practices Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3652-3659. DOI: 10.1007/S11661-011-0648-5 |
0.515 |
|
| 2011 |
Kim D, Speer JG, De Cooman BC. Isothermal transformation of a CMnSi steel below the MS temperature Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 1575-1585. DOI: 10.1007/S11661-010-0557-Z |
0.465 |
|
| 2011 |
Regier RW, Speer JG, Matlock DK, Choi JK. Effect of cooling rate on the crystallographic effective grain size of ferrite in low-carbon microalloy steels International Symposium On the Recent Developments in Plate Steels. 351-363. |
0.391 |
|
| 2011 |
De Moor E, Speer JG, Matlock DK, Hanlon DN. Effect of retained austenite on tensile behavior of AHSS revisited Materials Science and Technology Conference and Exhibition 2011, Ms and T'11. 1: 568-579. |
0.367 |
|
| 2011 |
Nowill CA, Speer JG, De Moor E, Matlock DK. Effect of austenitizing conditions on hardenability of boron-added microalloyed steel International Symposium On the Recent Developments in Plate Steels. 273-283. |
0.405 |
|
| 2011 |
Thomas G, Speer JG, Matlock DK, De Moor E, Garza L. Alloy design for fundamental study of quenched and partitioned steels Materials Science and Technology Conference and Exhibition 2011, Ms and T'11. 1: 552-567. |
0.422 |
|
| 2011 |
De Moor E, Speer JG, Matlock DK, Hanlon DN. Effect of retained austenite on tensile behavior of AHSS revisited Materials Science and Technology Conference and Exhibition 2011, Ms and T'11. 1: 568-579. |
0.367 |
|
| 2011 |
Raines J, Matlock DK, Speer JG, Glodowski RJ. Influence of V(C,N)precipitation potential on recovery annealing response of microalloyed sheet steel Iron and Steel Technology. 8: 109-116. |
0.418 |
|
| 2011 |
Xu K, Brian C, Thomas CJ, Dyer MS, Speer JG, Matlock DK, Ansell GS. Model of Microalloy: Precipitation during continuous casying and reheating Iron and Steel Technology. 8: 59-68. |
0.341 |
|
| 2010 |
Ronevich JA, Speer JG, Matlock DK. Hydrogen embrittlement of commercially produced advanced high strength sheet steels Sae International Journal of Materials and Manufacturing. 3: 255-267. DOI: 10.4271/2010-01-0447 |
0.429 |
|
| 2010 |
Kim D, Speer JG, De Cooman BC. The isothermal transformation of low-alloy low-C CMnSi steels below M S Materials Science Forum. 654: 98-101. DOI: 10.4028/Www.Scientific.Net/Msf.654-656.98 |
0.482 |
|
| 2010 |
Matlock DK, Richards MD, Speer JG. Surface modification to enhance fatigue performance of steel: Applications of deep rolling Materials Science Forum. 638: 142-147. DOI: 10.4028/Www.Scientific.Net/Msf.638-642.142 |
0.501 |
|
| 2010 |
Speer JG, Bhadeshia HKDH. Microstructure evolution in irons and steels: A tribute to David V. Edmonds International Heat Treatment and Surface Engineering. 4: 62-69. DOI: 10.1179/174951410X12712449937207 |
0.378 |
|
| 2010 |
Edmonds DV, Speer JG. Martensitic steels with carbide free microstructures containing retained austenite Materials Science and Technology. 26: 386-391. DOI: 10.1179/026708309X12512744154162 |
0.594 |
|
| 2010 |
Moor Ed, Föjer C, Penning J, Clarke AJ, Speer JG. Publisher's Note: Calorimetric study of carbon partitioning from martensite into austenite [Phys. Rev. B 82, 104210 (2010)] Physical Review B. 82: 189901. DOI: 10.1103/Physrevb.82.189901 |
0.362 |
|
| 2010 |
De Moor E, Föjer C, Penning J, Clarke AJ, Speer JG. Calorimetric study of carbon partitioning from martensite into austenite steel Physical Review B - Condensed Matter and Materials Physics. 82. DOI: 10.1103/Physrevb.82.104210 |
0.547 |
|
| 2010 |
Matlock DK, Speer JG. Processing opportunities for new advanced high-strength sheet steels Materials and Manufacturing Processes. 25: 7-13. DOI: 10.1080/10426910903158272 |
0.492 |
|
| 2010 |
Hudgins AW, Matlock DK, Speer JG, Van Tyne CJ. Predicting instability at die radii in advanced high strength steels Journal of Materials Processing Technology. 210: 741-750. DOI: 10.1016/J.Jmatprotec.2009.12.012 |
0.351 |
|
| 2010 |
Dyer MS, Speer JG, Matlock DK, Shutts AJ, Jansto S, Xu K, Thomas BG. Microalloy precipitation in hot charged slabs Aistech - Iron and Steel Technology Conference Proceedings. 1035-1045. |
0.419 |
|
| 2010 |
De Moor E, Gibbs PJ, Speer JG, Matlock DK, Schroth JG. Strategies for third-generation advanced high-strength steel development Iron and Steel Technology. 7: 133-144. |
0.43 |
|
| 2010 |
Sprock A, Peretic MJ, Speer JG. Compact cooling as an alternative to alloying for production of DP/ TRIP steel grades Iron and Steel Technology. 7: 170-177. |
0.396 |
|
| 2009 |
Matlock DK, Speer JG. Microalloying concepts and application in long products Materials Science and Technology. 25: 1118-1125. DOI: 10.1179/174328408X322222 |
0.475 |
|
| 2009 |
Clarke AJ, Speer JG, Matlock DK, Rizzo FC, Edmonds DV, Santofimia MJ. Influence of carbon partitioning kinetics on final austenite fraction during quenching and partitioning Scripta Materialia. 61: 149-152. DOI: 10.1016/J.Scriptamat.2009.03.021 |
0.738 |
|
| 2009 |
Song R, Schroth JG, Speer JG, Matlock DK. Copper brazing response of some advanced high strength steel grades Journal of Materials Processing Technology. 209: 70-76. DOI: 10.1016/J.Jmatprotec.2008.01.030 |
0.511 |
|
| 2009 |
Santofimia MJ, Speer JG, Clarke AJ, Zhao L, Sietsma J. Influence of interface mobility on the evolution of austenite-martensite grain assemblies during annealing Acta Materialia. 57: 4548-4557. DOI: 10.1016/J.Actamat.2009.06.024 |
0.511 |
|
| 2009 |
Kim DH, Speer JG, Kim HS, De Cooman BC. Observation of an isothermal transformation during quenching and partitioning processing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 2048-2060. DOI: 10.1007/S11661-009-9891-4 |
0.532 |
|
| 2009 |
Speer JG, Bhadeshia HKDH. A tribute to Professor David V. Edmonds on the eve of his retirement Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 3: 1575-1590. |
0.372 |
|
| 2009 |
Kim DH, Speer JG, Kim HS, De Cooman BC. Isothermal transformation of CMnSi and CMnSiAl steels in the M s-Mf temperature range Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 3: 1603-1613. |
0.397 |
|
| 2009 |
De Moor E, Speer JG, Matlock DK, Föjer C, Penning J. Effect of Si, Al and Mo alloying on tensile properties obtained by quenching and partitioning Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 3: 1554-1563. |
0.46 |
|
| 2009 |
Martins AR, Rizzo F, Coelho D, Speer JG, Matlock D, He K, Edmonds D. Microstructure and mechanical properties of Ni-added high strength steels subjected to Quenching and Partitioning (Q&P) heat treatment Materials Science and Technology Conference and Exhibition 2009, Ms and T'09. 3: 1564-1574. |
0.36 |
|
| 2008 |
Choi I, Bruce DM, Matlock DK, Speer JG. The high-speed deformation behavior of TRIP steels Metals and Materials International. 14: 139-146. DOI: 10.3365/Met.Mat.2008.04.139 |
0.368 |
|
| 2008 |
Rivas AL, Matlock DK, Speer JG. Quantitative analysis of Nb in solution in a microalloyed carburizing steel by electrochemical etching Materials Characterization. 59: 571-577. DOI: 10.1016/J.Matchar.2007.04.015 |
0.413 |
|
| 2008 |
Clarke AJ, Speer JG, Miller MK, Hackenberg RE, Edmonds DV, Matlock DK, Rizzo FC, Clarke KD, De Moor E. Carbon partitioning to austenite from martensite or bainite during the quench and partition (Q&P) process: A critical assessment Acta Materialia. 56: 16-22. DOI: 10.1016/J.Actamat.2007.08.051 |
0.732 |
|
| 2008 |
de Moor E, Lacroix S, Clarke AJ, Penning J, Speer JG. Effect of retained austenite stabilized via quench and partitioning on the strain hardening of martensitic steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2586-2595. DOI: 10.1007/s11661-008-9609-z |
0.402 |
|
| 2008 |
Samek L, Moor E, Penning J, Speer JG, Cooman BC. Static strain aging of microstructural constituents in transformation-induced-plasticity steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 39: 2542-2554. DOI: 10.1007/s11661-008-9605-3 |
0.348 |
|
| 2008 |
Regier RW, Speer JG, Matlock DK, Jansto SG. Ferrite substructure as an elevated temperature strengthening mechanism for fire-resistant structural ateel Materials Science and Technology Conference and Exhibition, Ms and T'08. 3: 1571-1581. |
0.385 |
|
| 2008 |
Alogab KA, Matlock DK, Speer JG. Microstructural control and properties in Nb-modified carburized steels New Developments On Metallurgy and Applications of High Strength Steels, Buenos Aires 2008 - Proc. Int. Conf. New Developments On Metallurgy and Applications of High Strength Steels. 2: 963-976. |
0.447 |
|
| 2008 |
Edmonds DV, He K, Rizzo FC, Speer JG, Matlock DK. Microstructure development in steels subjected to a Quenching and Partitioning (Q&P) heat treatment New Developments On Metallurgy and Applications of High Strength Steels, Buenos Aires 2008 - Proc. Int. Conf. New Developments On Metallurgy and Applications of High Strength Steels. 2: 829-842. |
0.338 |
|
| 2008 |
De Moor E, Föjer C, Clarke AJ, Penning J, Speer JG. Quench and Partitioning response of a Mo-alloyed CMnSi steel New Developments On Metallurgy and Applications of High Strength Steels, Buenos Aires 2008 - Proc. Int. Conf. New Developments On Metallurgy and Applications of High Strength Steels. 2: 721-730. |
0.501 |
|
| 2008 |
Speer JG, Matlock DK. Progress in the global development of the quenching and partitioning Proceedings of the 17th Ifhtse Congress. 2: 415-422. |
0.416 |
|
| 2007 |
Thompson RE, Matlock DK, Speer JG. The fatigue performance of high temperature vacuum carburized Nb modified 8620 steel Sae Technical Papers. DOI: 10.4271/2007-01-1007 |
0.36 |
|
| 2007 |
Spice JJ, Speer JG, Krauss G, Matlock DK, Meyer H. Effects of silicon and boron additions on the susceptibility to quench embrittlement and the bending fatigue performance of vacuum carburized modified 4320 steel Sae Technical Papers. DOI: 10.4271/2007-01-1005 |
0.403 |
|
| 2007 |
Edmonds DV, He K, Miller MK, Rizzo FC, Clarke A, Matlock DK, Speer JG. Microstructural Features of 'Quenching and Partitioning': A New Martensitic Steel Heat Treatment Materials Science Forum. 4819-4825. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.4819 |
0.782 |
|
| 2007 |
Rizzo FC, Martins AR, Speer JG, Matlock DK, Clarke A, Cooman BCD. Quenching and Partitioning of Ni-Added High Strength Steels Materials Science Forum. 4476-4481. DOI: 10.4028/Www.Scientific.Net/Msf.539-543.4476 |
0.607 |
|
| 2007 |
Alogab KA, Matlock DK, Speer JG, Kleebe HJ. The influence of niobium microalloying on austenite grain coarsening behavior of Ti-modified SAE 8620 steel Isij International. 47: 307-316. DOI: 10.2355/Isijinternational.47.307 |
0.501 |
|
| 2007 |
Alogab KA, Matlock DK, Speer JG, Kleebe HJ. The effects of heating rate on austenite grain growth in a Ti-modified SAE 8620 steel with controlled niobium additions Isij International. 47: 1034-1041. DOI: 10.2355/Isijinternational.47.1034 |
0.46 |
|
| 2007 |
Speer JG, Hackenberg RE, Decooman BC, Matlock DK. Influence of interface migration during annealing of martensite/austenite mixtures Philosophical Magazine Letters. 87: 379-382. DOI: 10.1080/09500830701194173 |
0.402 |
|
| 2007 |
Hilditch TB, Speer JG, Matlock DK. Effect of susceptibility to interfacial fracture on fatigue properties of spot-welded high strength sheet steel Materials and Design. 28: 2566-2576. DOI: 10.1016/J.Matdes.2006.10.019 |
0.412 |
|
| 2007 |
Hilditch TB, Speer JG, Matlock DK. Influence of low-strain deformation characteristics of high strength sheet steel on curl and springback in bend-under-tension tests Journal of Materials Processing Technology. 182: 84-94. DOI: 10.1016/J.Jmatprotec.2006.06.020 |
0.46 |
|
| 2007 |
Regier RW, Speer JG, Matlock DK, Bailey AJ, Jansto SG. Thermomechanical processing effects on the elevated temperature behavior of niobium bearing fire-resistant steel Aist Steel Properties and Applications Conference Proceedings, Combined With Ms and T'07, Materials Science and Technology 2007. 803-814. |
0.421 |
|
| 2007 |
Bykowski M, Krauss G, Speer JG. Effects of carburizing temperature on near-surface characteristics that influence rolling contact fatigue performance Vhcf-4 - 4th International Conference On Very High Cycle Fatigue. 195-200. |
0.356 |
|
| 2007 |
Blumhardt BA, Speer JG, Matlock DK, O'Malley R. Influence of chemical and processing variables on annealing response of cold-rolled microalloyed steels 2007 International Conference On Microalloyed Steels: Processing, Microstructure, Properties and Performance Proceedings. 277-287. |
0.315 |
|
| 2007 |
Hong SC, Ahn JC, Nam SY, Kim SJ, Yang HC, Speer JG, Matlock DK. Mechanical properties of high-Si plate steel produced by the quenching and partitioning process Metals and Materials International. 13: 439-445. |
0.488 |
|
| 2007 |
Rizzo F, Martins AR, Speer JG, Matlock D, Clarke A, De Cooman B. Quenching and partitioning of Ni-added high strength steels Materials Science Forum. 539: 4476-4481. |
0.302 |
|
| 2007 |
Edmonds DV, He K, Miller MK, Rizzo FC, Clarke A, Matlock DK, Speer JG. Microstructural features of 'quenching and partitioning': A new martensitic steel heat treatment Materials Science Forum. 539: 4819-4825. |
0.543 |
|
| 2006 |
Song R, Ponge D, Raabe D, Speer JG, Matlock DK. Overview of processing, microstructure and mechanical properties of ultrafine grained bcc steels Materials Science and Engineering A. 441: 1-17. DOI: 10.1016/J.Msea.2006.08.095 |
0.392 |
|
| 2006 |
Edmonds DV, He K, Rizzo FC, De Cooman BC, Matlock DK, Speer JG. Quenching and partitioning martensite-A novel steel heat treatment Materials Science and Engineering A. 438: 25-34. DOI: 10.1016/J.Msea.2006.02.133 |
0.773 |
|
| 2006 |
Al-Shalfan W, Speer JG, Matlock DK, Findley K. Effect of annealing time on solute carbon in ultralow-carbon Ti-V and Ti-Nb steels Metallurgical and Materials Transactions A. 37: 207-216. DOI: 10.1007/S11661-006-0165-0 |
0.528 |
|
| 2006 |
Choi ID, Kim DM, Kim SJ, Bruce DM, Matlock DK, Speer JG. The effect of retained austenite stability on high speed deformation behavior of TRIP steels Metals and Materials International. 12: 13-19. DOI: 10.1007/Bf03027517 |
0.404 |
|
| 2006 |
Milititsky M, DeCooman BC, Speer JG, De Wispelaere N, Akdut N. Room-temperature aging of manganese-alloyed high nitrogen duplex stainless steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 2117-2123. DOI: 10.1007/Bf02586132 |
0.384 |
|
| 2006 |
De Cooman BC, Speer JG. Quench and partitioning steel: A new AHSS concept for automotive anti-intrusion applications Steel Research International. 77: 634-640. DOI: 10.1002/Srin.200606441 |
0.56 |
|
| 2006 |
Shutts AJ, Speer JG, Matlock DK, Edmonds DV, Rizzo F, Damm EB. Q&P processing of high carbon bar steel International Conference On New Developments in Long and Forged Products: Metallurgy and Applications. 191-202. |
0.394 |
|
| 2006 |
Speer JG, Matlock DK, Krauss G. Recent developments in the physical metallurgy of ferrous long products Transactions of the Indian Institute of Metals. 59: 749-767. |
0.425 |
|
| 2006 |
Garrison JA, Speer JG, Thompson SW, Glodowski RJ, Williams KP. Aluminum and vanadium competition for nitrogen in thin slab processing Iron and Steel Technology. 3: 43-51. |
0.42 |
|
| 2006 |
De AK, Speer JG, Matlock DK, Murdock DC, Mataya MC, Comstock RJ. Deformation-induced phase transformation and strain hardening in type 304 austenitic stainless steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 1875-1886. |
0.317 |
|
| 2006 |
Al-Shalfan W, Speer JG, Findley K, Matlock DK. Effect of annealing time on solute carbon in ultralow-carbon Ti-V and Ti-Nb steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 207-216. |
0.441 |
|
| 2005 |
Turnquist DA, Matlock DK, Speer JG, Krauss G. Effects of testing temperature on the fatigue behavior of carburized steel Sae Technical Papers. DOI: 10.4271/2005-01-0986 |
0.452 |
|
| 2005 |
Matlock DK, Krauss G, Speer JG. New microalloyed steel applications for the automotive sector Materials Science Forum. 500: 87-96. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.87 |
0.52 |
|
| 2005 |
Al Shalfan WA, Speer JG, Matlock DK. Parameters influencing the bake hardenability of microalloyed ULC steels Materials Science Forum. 500: 779-786. DOI: 10.4028/Www.Scientific.Net/Msf.500-501.779 |
0.52 |
|
| 2005 |
Matlock DK, Alogab KA, Richards MD, Speer JG. Surface processing to improve the fatigue resistance of advanced bar steels for automotive applications Materials Research. 8: 453-459. DOI: 10.1590/S1516-14392005000400017 |
0.481 |
|
| 2005 |
Streicher-Clarke AM, Speer JG, Matlock DK, Williamson DL, DeCooman BC. Analysis of lattice parameter changes following deformation of a 0.19C-1.63Si-1.59Mn transformation- induced plasticity sheet steel Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 907-918. DOI: 10.1007/S11661-005-0285-Y |
0.429 |
|
| 2005 |
Coryell JJ, Matlock DK, Speer JG. The effect of induction hardening on the mechanical properties of steel with controlled prior microstructures Materials Science and Technology. 2: 3-14. |
0.469 |
|
| 2005 |
Garrison JA, Speer JG, Thompson SW, Glodowski RJ, Williams KP. Aluminum and vanadium competition for nitrogen in CSP sheet steels Materials Science and Technology. 2: 187-198. |
0.381 |
|
| 2005 |
Clarke A, Speer JG, Matlock DK, Rizzo FC, Edmonds DV, He K. Microstructure and carbon partitioning in a 0.19%C-1.59%Mn-1.63%Si trip sheet steel subjected to quenching and partitioning (Q&P) Proceedings of An International Conference On Solid-Solid Phase Transformations in Inorganic Materials 2005. 2: 99-108. |
0.461 |
|
| 2005 |
Rizzo FC, Edmonds DV, He K, Speer JG, Matlock DK, Clarke A. Carbon enrichment of austenite and carbide precipitation during the Quenching and Partitioning (Q&P) process Proceedings of An International Conference On Solid-Solid Phase Transformations in Inorganic Materials 2005. 1: 535-544. |
0.48 |
|
| 2005 |
Coryell JJ, Matlock DK, Speer JG. The effect of induction hardening on the mechanical properties of steel with controlled prior microstructures Materials Science and Technology. 2: 3-14. |
0.469 |
|
| 2005 |
Streicher-Clarke AM, Speer JG, Matlock DK, DeCooman BC, Williamson DL. Analysis of lattice parameter changes following deformation of a 0.19C-1.63Si-1.59Mn transformation-induced plasticity sheet steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 907-918. |
0.321 |
|
| 2005 |
Speer JG. High strength advanced sheet steels for automotive applications: The "tempering and partitioning" process promises high strength and expansion Metalurgia E Materiais. 61: 103-105. |
0.351 |
|
| 2004 |
Richards MD, Matlock DK, Speer JG. Deep rolling response of notched medium carbon bar steels Sae Technical Papers. DOI: 10.4271/2004-01-1528 |
0.384 |
|
| 2004 |
De AK, Murdock DC, Mataya MC, Speer JG, Matlock DK. Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction Scripta Materialia. 50: 1445-1449. DOI: 10.1016/J.Scriptamat.2004.03.011 |
0.322 |
|
| 2004 |
Speer JG, Edmonds DV, Rizzo FC, Matlock DK. Partitioning of carbon from supersaturated plates of ferrite, with application to steel processing and fundamentals of the bainite transformation Current Opinion in Solid State and Materials Science. 8: 219-237. DOI: 10.1016/J.Cossms.2004.09.003 |
0.737 |
|
| 2004 |
Gerdemann FLH, Speer JG, Matlock DK. Microstructure and hardness of steel grade 9260 heat-treated by the quenching and partitioning (Q&P) process Materials Science and Technology. 1: 439-449. |
0.444 |
|
| 2004 |
De AK, Kircher RS, Speer JG, Matlock DK. Transformation behavior of retained austenite in TRIP steels as revealed by a specialized etching technique International Conference On Advanced High Strength Sheet Steels For Automotive Applications - Proceedings. 337-347. |
0.445 |
|
| 2004 |
Streicher AM, Speer JG, Matlock DK, De Cooman BC. Quenching and partitioning response of a Si-added TRIP sheet steel International Conference On Advanced High Strength Sheet Steels For Automotive Applications - Proceedings. 51-62. |
0.489 |
|
| 2003 |
Clarke KD, Comstock RJ, Mataya MC, Matlock DK, Speer JG, Martins GP. The effect of strain rate on the sheet tensile properties and formability of ferritic stainless steels Sae Technical Papers. DOI: 10.4271/2003-01-0526 |
0.361 |
|
| 2003 |
Matlock DK, Bräutigam VE, Speer JG. Application of the quenching and partitioning (Q&P) process to a medium-carbon, high-Si microalloyed bar steel Materials Science Forum. 426: 1089-1094. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.1089 |
0.425 |
|
| 2003 |
Gallagher MF, Speer JG, Matlock DK. Effect of annealing temperature on austenite decomposition in a Si-alloyed trip steel Materials Science and Technology 2003 Meeting. 563-576. |
0.442 |
|
| 2003 |
Speer JG, Streicher AM, Matlock DK, Rizzo F, Krauss G. Quenching and partitioning: A fundamentally new process to create high strength trip sheet microstructures Materials Science and Technology 2003 Meeting. 505-522. |
0.459 |
|
| 2003 |
Rathbun RW, Matlock DK, Speer JG. Fatigue behavior of spot welded high-strength sheet steels Welding Journal (Miami, Fla). 82. |
0.368 |
|
| 2003 |
De AK, Speer JG, Matlock DK. Color tint-etching for multiphase steels Advanced Materials and Processes. 161: 27-30. |
0.317 |
|
| 2002 |
Wüebbels T, Matlock DK, Speer JG. The effects of room temperature aging on subsequent bake-hardening of automotive sheet steels Sae Technical Papers. DOI: 10.4271/2002-01-0041 |
0.456 |
|
| 2002 |
Choi ID, Bruce DM, Kim SJ, Lee CG, Park SH, Matlock DK, Speer JG. Deformation Behavior of Low Carbon TRIP Sheet Steels at High Strain Rates Isij International. 42: 1483-1489. DOI: 10.2355/Isijinternational.42.1483 |
0.403 |
|
| 2002 |
Nagata MT, Speer JG, Matlock DK. Titanium nitride precipitation behavior in thin-slab cast high-strength low-alloy steels Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 3099-3110. DOI: 10.1007/S11661-002-0294-Z |
0.521 |
|
| 2002 |
Ryu HB, Speer JG, Wise JP. Effect of thermomechanical processing on the retained austenite content in a Si-Mn transformation-induced-plasticity steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 33: 2811-2816. DOI: 10.1007/S11661-002-0266-3 |
0.499 |
|
| 2002 |
Speer JG, Matlock DK. Recent developments in low-carbon sheet steels Jom. 54: 19-24. DOI: 10.1007/Bf02700981 |
0.465 |
|
| 2002 |
Streicher AM, Speer JG, Matlock DK. Forming response of retained austenite in a C-Si-Mn high strength TRIP sheet steel Steel Research. 73: 287-293. DOI: 10.1002/Srin.200200210 |
0.423 |
|
| 2002 |
Sjong AL, Bodnar RL, Merwin MJ, Matlock DK, Speer JG. Fracture behavior of Nb-V-Ti microalloyed plates processed with and without intermediate cooling Microalloyed Steels 2002. 92-100. |
0.328 |
|
| 2001 |
Nagata MT, Speer JG, Matlock DK. Effect of deformation on cementite precipitation during overaging of low-carbon sheet steel Scripta Materialia. 44: 899-903. DOI: 10.1016/S1359-6462(00)00696-5 |
0.463 |
|
| 2001 |
Matlock DK, Krauss G, Speer JG. Microstructures and properties of direct-cooled microalloy forging steels Journal of Materials Processing Technology. 117: 324-328. DOI: 10.1016/S0924-0136(01)00792-0 |
0.432 |
|
| 2000 |
Lee J, Speer JG, Matlock DK. Bending fatigue properties of prestrained interstitial free zinc-coated sheet steels Sae Technical Papers. DOI: 10.4271/2000-01-0309 |
0.373 |
|
| 2000 |
Rathbun RW, Matlock DK, Speer JG. Strain aging behavior of austenitic stainless steels containing strain induced martensite Scripta Materialia. 42: 887-891. DOI: 10.1016/S1359-6462(00)00308-0 |
0.371 |
|
| 2000 |
Davidson SG, Wise JP, Speer JG. The Influence of Titanium on Grain Size in High-Temperature Carburized Steels Asm Proceedings: Heat Treating. 2: 1144-1151. |
0.397 |
|
| 2000 |
Perry AC, Thompson SW, Speer JG. Physical metallurgy of ferritic hot rolled low carbon steel Iron and Steelmaker (I and Sm). 27: 47-57. |
0.438 |
|
| 1999 |
Speer JG, Edmonds DV. Aging of α′a martensite in U-0.77Ti Acta Materialia. 47: 2197-2205. DOI: 10.1016/S1359-6454(99)00055-5 |
0.663 |
|
| 1997 |
Taylor KA, Speer JG. Development of vanadium-alloyed, bake-hardenable sheet steels for hot-dip coated applications Mechanical Working and Steel Processing Conference Proceedings. 49-61. |
0.431 |
|
| 1993 |
Raghavan KS, Speer JG. Interaction of coating type and deformation mode on formability of automotive sheet steels Mechanical Working and Steel Processing Conference Proceedings. 31: 107-123. |
0.306 |
|
| 1991 |
Bramfitt BL, Speer JG. Microstructure of continuously cooled bainite Transactions of the Iron and Steel Society of Aime. 12: 195-203. |
0.448 |
|
| Show low-probability matches. |