| Year |
Citation |
Score |
| 2020 |
Li J, Hwang S, Itskos G, Sandhage KH. Kinetic mechanism of conformal magnesium silicide (Mg2Si) film formation via reaction of Si single crystals with Mg vapor Journal of Materials Science. 55: 1107-1116. DOI: 10.1007/S10853-019-04083-6 |
0.344 |
|
| 2018 |
Semenikhin NS, Kadasala NR, Moon RJ, Perry JW, Sandhage KH. Individually Dispersed Gold Nanoshell-Bearing Cellulose Nanocrystals with Tailorable Plasmon Resonance. Langmuir : the Acs Journal of Surfaces and Colloids. PMID 29577731 DOI: 10.1021/Acs.Langmuir.7B03868 |
0.322 |
|
| 2018 |
Zhang Y, Cai Y, Hwang S, Wilk G, DeAngelis F, Henry A, Sandhage KH. Containment materials for liquid tin at 1350 °C as a heat transfer fluid for high temperature concentrated solar power Solar Energy. 164: 47-57. DOI: 10.1016/J.Solener.2018.01.085 |
0.334 |
|
| 2018 |
Gordin AS, Sandhage KH. In situ high-temperature X-ray diffraction analysis of Mg2Si formation kinetics via reaction of Mg films with Si single crystal substrates Intermetallics. 94: 200-209. DOI: 10.1016/J.Intermet.2018.01.003 |
0.334 |
|
| 2017 |
Goodwin WB, Shin D, Sabo D, Hwang S, Zhang ZJ, Meredith JC, Sandhage KH. Tunable multimodal adhesion of 3D, nanocrystalline CoFe2O4 pollen replicas. Bioinspiration & Biomimetics. 12: 066009. PMID 29105642 DOI: 10.1088/1748-3190/Aa7C89 |
0.346 |
|
| 2017 |
Cheng A, Goodwin WB, deGlee BM, Gittens RA, Vernon JP, Hyzy SL, Schwartz Z, Sandhage KH, Boyan BD. Surface modification of bulk titanium substrates for biomedical applications via low-temperature microwave hydrothermal oxidation. Journal of Biomedical Materials Research. Part A. PMID 29067777 DOI: 10.1002/Jbm.A.36280 |
0.335 |
|
| 2016 |
Fang Y, Hester JGD, Deglee BM, Tuan CC, Brooke PD, Le T, Wong CP, Tentzeris MM, Sandhage KH. A novel, facile, layer-by-layer substrate surface modification for the fabrication of all-inkjet-printed flexible electronic devices on Kapton Journal of Materials Chemistry C. 4: 7052-7060. DOI: 10.1039/C6Tc01066K |
0.35 |
|
| 2016 |
Waller GH, Brooke PD, Rainwater BH, Lai SY, Hu R, Ding Y, Alamgir FM, Sandhage KH, Liu ML. Structure and surface chemistry of Al2O3 coated LiMn2O4 nanostructured electrodes with improved lifetime Journal of Power Sources. 306: 162-170. DOI: 10.1016/J.Jpowsour.2015.11.114 |
0.303 |
|
| 2015 |
Gomez IJ, Goodwin WB, Sabo D, Zhang ZJ, Sandhage KH, Meredith JC. Three-dimensional magnetite replicas of pollen particles with tailorable and predictable multimodal adhesion Journal of Materials Chemistry C. 3: 632-643. DOI: 10.1039/C4Tc01938E |
0.406 |
|
| 2014 |
Kieu K, Li C, Fang Y, Cohoon G, Herrera OD, Hildebrand M, Sandhage KH, Norwood RA. Structure-based optical filtering by the silica microshell of the centric marine diatom Coscinodiscus wailesii. Optics Express. 22: 15992-9. PMID 24977855 DOI: 10.1364/Oe.22.015992 |
0.317 |
|
| 2014 |
Barta MB, Nadler JH, Kang Z, Wagner BK, Rosson R, Cai Y, Sandhage KH, Kahn B. Composition optimization of scintillating rare-earth nanocrystals in oxide glass-ceramics for radiation spectroscopy. Applied Optics. 53: D21-8. PMID 24922440 DOI: 10.1364/Ao.53.000D21 |
0.327 |
|
| 2013 |
Xing A, Zhang J, Bao Z, Mei Y, Gordin AS, Sandhage KH. A magnesiothermic reaction process for the scalable production of mesoporous silicon for rechargeable lithium batteries. Chemical Communications (Cambridge, England). 49: 6743-5. PMID 23783092 DOI: 10.1039/C3Cc43134G |
0.715 |
|
| 2013 |
Berrigan JD, McLachlan T, Deneault JR, Cai Y, Kang TS, Durstock MF, Sandhage KH. Conversion of porous anodic Al2O3 into freestanding, uniformly aligned, multi-wall TiO2 nanotube arrays for electrode applications Journal of Materials Chemistry A. 1: 128-134. DOI: 10.1039/C2Ta01015A |
0.369 |
|
| 2013 |
Brandon Goodwin W, Gomez IJ, Fang Y, Meredith JC, Sandhage KH. Conversion of pollen particles into three-dimensional ceramic replicas tailored for multimodal adhesion Chemistry of Materials. 25: 4529-4536. DOI: 10.1021/Cm402226W |
0.378 |
|
| 2013 |
Cook BS, Fang Y, Kim S, Le T, Goodwin WB, Sandhage KH, Tentzeris MM. Inkjet catalyst printing and electroless copper deposition for low-cost patterned microwave passive devices on paper Electronic Materials Letters. 9: 669-676. DOI: 10.1007/S13391-013-3027-0 |
0.317 |
|
| 2013 |
Davis SC, Sheppard VC, Begum G, Cai Y, Fang Y, Berrigan JD, Kröger N, Sandhage KH. Rapid flow-through biocatalysis with high surface area, enzyme-loaded carbon and gold-bearing diatom frustule replicas Advanced Functional Materials. 23: 4611-4620. DOI: 10.1002/Adfm.201203758 |
0.389 |
|
| 2013 |
Dickerson MB, Lyon WJ, Gruner WE, Mirau PA, Jespersen ML, Fang Y, Sandhage KH, Naik RR. Unlocking the latent antimicrobial potential of biomimetically synthesized inorganic materials Advanced Functional Materials. 23: 4236-4245. DOI: 10.1002/Adfm.201202851 |
0.343 |
|
| 2012 |
Lipke DW, Zhang Y, Cai Y, Sandhage KH. Intragranular tungsten/zirconium carbide nanocomposites via a selective liquid/solid displacement reaction Journal of the American Ceramic Society. 95: 2769-2772. DOI: 10.1111/J.1551-2916.2012.05345.X |
0.733 |
|
| 2012 |
Chen K, Bao Z, Shen J, Wu G, Zhou B, Sandhage KH. Freestanding monolithic silicon aerogels Journal of Materials Chemistry. 22: 16196-16200. DOI: 10.1039/C2Jm31662E |
0.699 |
|
| 2012 |
Vernon JP, Hobbs N, Cai Y, Lethbridge A, Vukusic P, Deheyn DD, Sandhage KH. 3D photoluminescent lanthanide-doped barium titanate structures synthesized by coating and shape-preserving reaction of complex-shaped bioorganic templates Journal of Materials Chemistry. 22: 10435-10437. DOI: 10.1039/C2Jm31435E |
0.422 |
|
| 2012 |
Fang Y, Berrigan JD, Cai Y, Marder SR, Sandhage KH. Syntheses of nanostructured Cu- and Ni-based micro-assemblies with selectable 3-D hierarchical biogenic morphologies Journal of Materials Chemistry. 22: 1305-1312. DOI: 10.1039/C1Jm13884G |
0.414 |
|
| 2012 |
Fang Y, Chen VW, Cai Y, Berrigan JD, Marder SR, Perry JW, Sandhage KH. Gold Nanostructures: Biologically‐Enabled Syntheses of Freestanding Metallic Structures Possessing Subwavelength Pore Arrays for Extraordinary (Surface Plasmon‐Mediated) Infrared Transmission (Adv. Funct. Mater. 12/2012) Advanced Functional Materials. 22: 2655-2655. DOI: 10.1002/Adfm.201290072 |
0.32 |
|
| 2012 |
Fang Y, Chen VW, Cai Y, Berrigan JD, Marder SR, Perry JW, Sandhage KH. Biologically enabled syntheses of freestanding metallic structures possessing subwavelength pore arrays for extraordinary (surface plasmon-mediated) infrared transmission Advanced Functional Materials. 22: 2550-2559. DOI: 10.1002/Adfm.201102715 |
0.388 |
|
| 2012 |
Wurm PJ, Kumar P, Ralston KD, Mills MJ, Sandhage KH. Fabrication of Lightweight Oxide/Intermetallic Composites at 1000°C by the Displacive Compensation of Porosity (DCP) Method Ceramic Transactions. 129: 93-101. DOI: 10.1002/9781118370872.Ch8 |
0.378 |
|
| 2011 |
Kim S, Bastani Y, Lu H, King WP, Marder S, Sandhage KH, Gruverman A, Riedo E, Bassiri-Gharb N. Direct fabrication of arbitrary-shaped ferroelectric nanostructures on plastic, glass, and silicon substrates. Advanced Materials (Deerfield Beach, Fla.). 23: 3786-90. PMID 21766356 DOI: 10.1002/Adma.201101991 |
0.371 |
|
| 2011 |
Mishchenko L, Hatton B, Burgess IB, Davis S, Sandhage K, Aizenberg J. Colloidal co-assembly route to large-area, high-quality photonic crystals Proceedings of Spie - the International Society For Optical Engineering. 7946. DOI: 10.1117/12.881270 |
0.335 |
|
| 2011 |
Bao Z, Song MK, Davis SC, Cai Y, Liu M, Sandhage KH. High surface area, micro/mesoporous carbon particles with selectable 3-D biogenic morphologies for tailored catalysis, filtration, or adsorption Energy and Environmental Science. 4: 3980-3984. DOI: 10.1039/C1Ee02102H |
0.707 |
|
| 2011 |
Cheun H, Berrigan JD, Zhou Y, Fenoll M, Shim J, Fuentes-Hernandez C, Sandhage KH, Kippelen B. Roles of thermally-induced vertical phase segregation and crystallization on the photovoltaic performance of bulk heterojunction inverted polymer solar cells Energy and Environmental Science. 4: 3456-3460. DOI: 10.1039/C1Ee01316E |
0.303 |
|
| 2011 |
Kim S, Bastani Y, Lu H, King WP, Marder S, Sandhage KH, Gruverman A, Riedo E, Bassiri-Gharb N. Nanomanufacturing: Direct Fabrication of Arbitrary-Shaped Ferroelectric Nanostructures on Plastic, Glass, and Silicon Substrates (Adv. Mater. 33/2011) Advanced Materials. 23: 3740-3740. DOI: 10.1002/Adma.201190130 |
0.356 |
|
| 2011 |
Berrigan JD, Kang T, Cai Y, Deneault JR, Durstock MF, Sandhage KH. Titania Nanotubes: Protein-Enabled Layer-by-Layer Syntheses of Aligned, Porous-Wall, High-Aspect-Ratio TiO2 Nanotube Arrays (Adv. Funct. Mater. 9/2011) Advanced Functional Materials. 21: 1537-1537. DOI: 10.1002/Adfm.201190026 |
0.366 |
|
| 2011 |
Haase NR, Shian S, Sandhage KH, Kröger N. Biocatalytic nanoscale coatings through biomimetic layer-by-layer mineralization Advanced Functional Materials. 21: 4243-4251. DOI: 10.1002/Adfm.201101202 |
0.325 |
|
| 2011 |
Berrigan JD, Kang TS, Cai Y, Deneault JR, Durstock MF, Sandhage KH. Protein-enabled layer-by-layer syntheses of aligned, porous-wall, high-aspect-ratio TiO 2 nanotube arrays Advanced Functional Materials. 21: 1693-1700. DOI: 10.1002/Adfm.201002676 |
0.372 |
|
| 2010 |
Cheun H, Kim J, Zhou Y, Fang Y, Dindar A, Shim J, Fuentes-Hernandez C, Sandhage KH, Kippelen B. Inverted polymer solar cells with amorphous indium zinc oxide as the electron-collecting electrode. Optics Express. 18: A506-12. PMID 21165082 DOI: 10.1364/Oe.18.00A506 |
0.313 |
|
| 2010 |
Vernon JP, Fang Y, Cai Y, Sandhage KH. Morphology-preserving conversion of a 3D bioorganic template into a nanocrystalline multicomponent oxide compound. Angewandte Chemie (International Ed. in English). 49: 7765-8. PMID 20827744 DOI: 10.1002/Anie.201003170 |
0.368 |
|
| 2010 |
Hatton B, Mishchenko L, Davis S, Sandhage KH, Aizenberg J. Assembly of large-area, highly ordered, crack-free inverse opal films. Proceedings of the National Academy of Sciences of the United States of America. 107: 10354-9. PMID 20484675 DOI: 10.1073/Pnas.1000954107 |
0.323 |
|
| 2010 |
Kröger N, Sandhage KH. From Diatom Biomolecules to Bioinspired Syntheses of Silica- and Titania-Based Materials Mrs Bulletin. 35: 122-126. DOI: 10.1557/Mrs2010.631 |
0.371 |
|
| 2010 |
Shian S, Sandhage KH. Hexagonal and cubic TiOF2 Journal of Applied Crystallography. 43: 757-761. DOI: 10.1107/S0021889810016730 |
0.338 |
|
| 2010 |
Lipke DW, Zhang Y, Liu Y, Church BC, Sandhage KH. Near net-shape/net-dimension ZrC/W-based composites with complex geometries via rapid prototyping and Displacive Compensation of Porosity Journal of the European Ceramic Society. 30: 2265-2277. DOI: 10.1016/J.Jeurceramsoc.2010.01.011 |
0.744 |
|
| 2010 |
Sandhage KH. Materials "alchemy": Shape-preserving chemical transformation of micro-to-macroscopic 3-D structures Jom. 62: 32-43. DOI: 10.1007/S11837-010-0085-8 |
0.385 |
|
| 2009 |
Shian S, Sandhage KH. A gas-tight Cu K alpha x-ray transparent reaction chamber for high-temperature x-ray diffraction analyses of halide gas/solid reactions. The Review of Scientific Instruments. 80: 115108. PMID 19947758 DOI: 10.1063/1.3257973 |
0.32 |
|
| 2009 |
Sandhage KH, Bao Z, Shian S, Davis S, Weatherspoon MR, Fang Y, Cai Y, Wang G, Jones SC, Marder SR. D-43 Invited—Chemical Tailoring of Biologically-Assembled Nanostructured 3-D Microassemblies: The Potential for Genetically Engineered Materials and Microdevices (GEMs) Powder Diffraction. 24: 166-166. DOI: 10.1154/1.3175938 |
0.764 |
|
| 2009 |
Fang Y, Wu Q, Dickerson MB, Cai Y, Shian S, Berrigan JD, Poulsen N, Kröger N, Sandhage KH. Protein-mediated layer-by-layer syntheses of freestanding microscale titania structures with biologically assembled 3-D morphologies Chemistry of Materials. 21: 5704-5710. DOI: 10.1021/Cm9011525 |
0.422 |
|
| 2009 |
Liu Y, Lipke DW, Zhang Y, Sandhage KH. The kinetics of incongruent reduction of tungsten carbide via reaction with a hafnium-copper melt Acta Materialia. 57: 3924-3931. DOI: 10.1016/J.Actamat.2009.04.052 |
0.715 |
|
| 2009 |
Bao Z, Ernst EM, Yoo S, Sandhage KH. Syntheses of porous self-supporting metal-nanoparticle assemblies with 3D morphologies inherited from biosilica templates (diatom frustules) Advanced Materials. 21: 474-478. DOI: 10.1002/Adma.200801499 |
0.741 |
|
| 2009 |
Wang G, Fang Y, Kim P, Hayek A, Weatherspoon MR, Perry JW, Sandhage KH, Marder SR, Jones SC. Layer-by-layer dendritic growth of hyperbranched thin films for surface sol-gel syntheses of conformal, functional, nanocrystalline oxide coatings on complex 3D (bio)silica templates Advanced Functional Materials. 19: 2768-2776. DOI: 10.1002/Adfm.200900402 |
0.756 |
|
| 2008 |
Weatherspoon MR, Cai Y, Crne M, Srinivasarao M, Sandhage KH. 3D rutile titania-based structures with morpho butterfly wing scale morphologies. Angewandte Chemie (International Ed. in English). 47: 7921-3. PMID 18773402 DOI: 10.1002/Anie.200801311 |
0.747 |
|
| 2008 |
Ahmad G, Dickerson MB, Cai Y, Jones SE, Ernst EM, Vernon JP, Haluska MS, Fang Y, Wang J, Subramanyam G, Naik RR, Sandhage KH. Rapid bioenabled formation of ferroelectric BaTiO3 at room temperature from an aqueous salt solution at near neutral pH. Journal of the American Chemical Society. 130: 4-5. PMID 18067293 DOI: 10.1021/Ja0744302 |
0.314 |
|
| 2008 |
Carney CM, Akbar SA, Cai Y, Yoo S, Sandhage KH. Reactive conversion of polycrystalline SnO2 into single-crystal nanofiber arrays at low oxygen partial pressure Journal of Materials Research. 23: 2639-2641. DOI: 10.1557/Jmr.2008.0321 |
0.336 |
|
| 2008 |
Shepherd RF, Panda P, Bao Z, Sandhage KH, Hatton TA, Lewis JA, Doyle PS. Cover Picture: Stop‐Flow Lithography of Colloidal, Glass, and Silicon Microcomponents (Adv. Mater. 24/2008) Advanced Materials. 20. DOI: 10.1002/Adma.200890101 |
0.677 |
|
| 2008 |
Shepherd RF, Panda P, Bao Z, Sandhage KH, Hatton TA, Lewis JA, Doyle PS. Stop-flow lithography of colloidal, glass, and silicon microcomponents Advanced Materials. 20: 4734-4739. DOI: 10.1002/Adma.200801090 |
0.661 |
|
| 2008 |
Sandhage KH, Allan SM, Dickerson MB, Ernst EM, Gaddis CS, Shian S, Weatherspoon MR, Ahmad G, Cai Y, Haluska MS, Snyder RL, Unocic RR, Zalar FM. Inorganic Preforms of Biological Origin: Shape-Preserving Reactive Conversion of Biosilica Microshells (Diatoms) Handbook of Biomineralization: Biological Aspects and Structure Formation. 2: 234-253. DOI: 10.1002/9783527619443.ch37 |
0.776 |
|
| 2007 |
Weatherspoon MR, Dickerson MB, Wang G, Cai Y, Shian S, Jones SC, Marder SR, Sandhage KH. Thin, conformal, and continuous SnO2 coatings on three-dimensional biosilica templates through hydroxy-group amplification and layer-by-layer alkoxide deposition. Angewandte Chemie (International Ed. in English). 46: 5724-7. PMID 17591742 DOI: 10.1002/Anie.200701297 |
0.732 |
|
| 2007 |
Kusari U, Bao Z, Cai Y, Ahmad G, Sandhage KH, Sneddon LG. Formation of nanostructured, nanocrystalline boron nitride microparticles with diatom-derived 3-D shapes. Chemical Communications (Cambridge, England). 1177-9. PMID 17347731 DOI: 10.1039/B614494B |
0.732 |
|
| 2007 |
Bao Z, Weatherspoon MR, Shian S, Cai Y, Graham PD, Allan SM, Ahmad G, Dickerson MB, Church BC, Kang Z, Abernathy HW, Summers CJ, Liu M, Sandhage KH. Chemical reduction of three-dimensional silica micro-assemblies into microporous silicon replicas. Nature. 446: 172-5. PMID 17344850 DOI: 10.1038/Nature05570 |
0.776 |
|
| 2007 |
Ernst EM, Church BC, Gaddis CS, Snyder RL, Sandhage KH. Enhanced hydrothermal conversion of surfactant-modified diatom microshells into barium titanate replicas Journal of Materials Research. 22: 1121-1127. DOI: 10.1557/Jmr.2007.0169 |
0.374 |
|
| 2007 |
Cai Y, Dickerson MB, Haluska MS, Kang Z, Summers CJ, Sandhage KH. Manganese-doped zinc orthosilicate-bearing phosphor microparticles with controlled three-dimensional shapes derived from diatom frustules Journal of the American Ceramic Society. 90: 1304-1308. DOI: 10.1111/J.1551-2916.2007.01612.X |
0.422 |
|
| 2007 |
Lee SJ, Huang CH, Shian S, Sandhage KH. Rapid hydrolysis of organophosphorous esters induced by nanostructured, fluorine-doped titania replicas of diatom frustules Journal of the American Ceramic Society. 90: 1632-1636. DOI: 10.1111/J.1551-2916.2007.01571.X |
0.317 |
|
| 2006 |
Luckarift HR, Dickerson MB, Sandhage KH, Spain JC. Rapid, room-temperature synthesis of antibacterial bionanocomposites of lysozyme with amorphous silica or titania. Small (Weinheim An Der Bergstrasse, Germany). 2: 640-3. PMID 17193101 DOI: 10.1002/Smll.200500376 |
0.314 |
|
| 2006 |
Kusari U, Bao Z, Ye C, Ahmad G, Sandhage KH, Sneddon LG. Template routes to non-oxide ceramic nano- And micro-structures Materials Research Society Symposium Proceedings. 921: 72-77. DOI: 10.1557/Proc-0921-T04-10 |
0.682 |
|
| 2006 |
Haluska MS, Snyder RL, Sandhage K. D094 In situ HTXRD analysis of displacement reactions using graphite reaction vessels—invited Powder Diffraction. 21: 171-171. DOI: 10.1154/1.2219792 |
0.334 |
|
| 2006 |
Weatherspoon MR, Haluska MS, Cai Y, King JS, Summers CJ, Snyder RL, Sandhage KH. Phosphor microparticles of controlled three-dimensional shape from phytoplankton Journal of the Electrochemical Society. 153. DOI: 10.1149/1.2150148 |
0.783 |
|
| 2006 |
Shian S, Cai Y, Weatherspoon MR, Allan SM, Sandhage KH. Three-dimensional assemblies of zirconia nanocrystals via shape-preserving reactive conversion of diatom microshells Journal of the American Ceramic Society. 89: 694-698. DOI: 10.1111/J.1551-2916.2005.00734.X |
0.783 |
|
| 2006 |
Koep E, Jin C, Haluska M, Das R, Narayan R, Sandhage K, Snyder R, Liu M. Microstructure and electrochemical properties of cathode materials for SOFCs prepared via pulsed laser deposition Journal of Power Sources. 161: 250-255. DOI: 10.1016/J.Jpowsour.2006.03.060 |
0.313 |
|
| 2006 |
Luckarift H, Dickerson M, Sandhage K, Spain J. Cover Picture: Rapid, Room-Temperature Synthesis of Antibacterial Bionanocomposites of Lysozyme with Amorphous Silica or Titania (Small 5/2006) Small. 2: 581-581. DOI: 10.1002/Smll.200690017 |
0.308 |
|
| 2006 |
Cai Y, Weatherspoon MR, Ernst E, Haluska MS, Snyder RL, Sandhage KH. 3-D microparticles of BaTiO3 and Zn2SiO4 via the chemical (sol-gel, acetate, or hydrothermal) conversion of biological (diatom) templates Ceramic Engineering and Science Proceedings. 27: 49-56. |
0.347 |
|
| 2005 |
Dickerson MB, Naik RR, Sarosi PM, Agarwal G, Stone MO, Sandhage KH. Ceramic nanoparticle assemblies with tailored shapes and tailored chemistries via biosculpting and shape-preserving inorganic conversion Journal of Nanoscience and Nanotechnology. 5: 63-67. PMID 15762162 DOI: 10.1166/jnn.2005.008 |
0.325 |
|
| 2005 |
Weatherspoon MR, Allan SM, Hunt E, Cai Y, Sandhage KH. Sol-gel synthesis on self-replicating single-cell scaffolds: applying complex chemistries to nature's 3-D nanostructured templates. Chemical Communications (Cambridge, England). 651-3. PMID 15672166 DOI: 10.1039/B409466B |
0.756 |
|
| 2005 |
Zhao J, Gaddis CS, Cai Y, Sandhage KH. Free-standing microscale structures of nanocrystalline zirconia with biologically replicable three-dimensional shapes Journal of Materials Research. 20: 282-287. DOI: 10.1557/Jmr.2005.0046 |
0.458 |
|
| 2005 |
Haluska MS, Dragomir IC, Sandhage KH, Snyder RL. X-ray diffraction analyses of 3D MgO-based replicas of diatom microshells synthesized by a low-temperature gas/solid displacement reaction Powder Diffraction. 20: 306-310. DOI: 10.1154/1.2135788 |
0.369 |
|
| 2005 |
Haluska M, Snyder R, Sandhage K. D057 Study of In Situ High Temperature Displacement Reactions via X-ray Diffraction Using a Novel Graphite Reaction Vessel Diatoms Powder Diffraction. 20: 178-178. DOI: 10.1154/1.1968283 |
0.335 |
|
| 2005 |
Sandhage KH, Allan SM, Dickerson MB, Gaddis CS, Shian S, Weatherspoon MR, Cai Y, Ahmad G, Haluska MS, Snyder RL, Unocic RR, Zalar FM, Zhang Y, Rapp RA, Hildebrand M, et al. Merging biological self-assembly with synthetic chemical tailoring: The potential for 3-D genetically engineered micro/nano-devices (3-D GEMS) International Journal of Applied Ceramic Technology. 2: 317-326. DOI: 10.1111/J.1744-7402.2005.02035.X |
0.775 |
|
| 2005 |
Cai Y, Allan SM, Sandhage KH, Zalar FM. Three-dimensional magnesia-based nanocrystal assemblies via low-temperature magnesiothermic reaction of diatom microshells Journal of the American Ceramic Society. 88: 2005-2010. DOI: 10.1111/J.1551-2916.2005.00388.X |
0.41 |
|
| 2005 |
Zhang X, Sandhage KH, Fraser HL. Synthesis of BaAl2Si2O8 from Solid Ba-Al-Al2O3-SiO2 Precursors: II, TEM Analyses of Phase Evolution Journal of the American Ceramic Society. 81: 2983-2997. DOI: 10.1111/J.1151-2916.1998.Tb02724.X |
0.315 |
|
| 2005 |
Allameh SM, Sandhage KH. Synthesis of Celsian (BaAl2Si2O8) from Solid Ba-Al-Al2O3-SiO2 Precursors: I, XRD and SEM/EDX Analyses of Phase Evolution Journal of the American Ceramic Society. 80: 3109-3126. DOI: 10.1111/J.1151-2916.1997.Tb03239.X |
0.348 |
|
| 2005 |
Haluska MS, Snyder RL, Sandhage KH, Misture ST. Closed, heated reaction chamber design for dynamic high-temperature x-ray-diffraction analyses of gas/solid displacement reactions Review of Scientific Instruments. 76: 1-4. DOI: 10.1063/1.2136076 |
0.314 |
|
| 2005 |
Cai Y, Sandhage KH. Zn 2SiO 4-coated microparticles with biologically-controlled 3D shapes Physica Status Solidi (a) Applications and Materials Science. 202. DOI: 10.1002/Pssa.200521073 |
0.411 |
|
| 2005 |
Allan SM, Weatherspoon MR, Graham PD, Cai Y, Haluska MS, Snyder RL, Sandhage KH. Shape-preserving chemical conversion of self-assembled 3-D bioclastic micro/nanostructures via low-temperature displacement reactions Ceramic Engineering and Science Proceedings. 26: 289-296. |
0.79 |
|
| 2005 |
Weatherspoon MR, Allan SM, Gaddis CS, Cai Y, Haluska MS, Snyder RL, Sandhage KH. Perovskite particles from phytoplankton Materials Research Society Symposium Proceedings. 873: 13-18. |
0.353 |
|
| 2004 |
Unocic RR, Zalar FM, Sarosi PM, Cai Y, Sandhage KH. Anatase assemblies from algae: coupling biological self-assembly of 3-D nanoparticle structures with synthetic reaction chemistry. Chemical Communications (Cambridge, England). 796-7. PMID 15045068 DOI: 10.1039/B400599F |
0.415 |
|
| 2004 |
Gaddis CS, Sandhage KH. Freestanding microscale 3D polymeric structures with biologically-derived shapes and nanoscale features Journal of Materials Research. 19: 2541-2545. DOI: 10.1557/Jmr.2004.0342 |
0.389 |
|
| 2004 |
Gouma PI, Mills MJ, Sandhage KH. Fabrication of Free-Standing Titania-Based Gas Sensors by the Oxidation of Metallic Titanium Foils Journal of the American Ceramic Society. 83: 1007-1009. DOI: 10.1111/J.1151-2916.2000.Tb01320.X |
0.343 |
|
| 2004 |
Rogers KA, Kumar P, Citak R, Sandhage KH. Dense, Shaped Ceramic/Metal Composites at lessthan equal to1000°C by the Displacive Compensation of Porosity (DCP) Method Journal of the American Ceramic Society. 82: 757-760. DOI: 10.1111/J.1151-2916.1999.Tb01829.X |
0.36 |
|
| 2004 |
Citak R, Rogers KA, Sandhage KH. Low-Temperature Synthesis of BaAl2O4/Aluminum-Bearing Composites by the Oxidation of Solid Metal-Bearing Precursors Journal of the American Ceramic Society. 82: 237-240. DOI: 10.1111/J.1151-2916.1999.Tb01752.X |
0.336 |
|
| 2004 |
Dickerson MB, Wurm PJ, Schorr JR, Huffman WP, Wapner PG, Sandhage KH. Near net-shape, ultra-high melting, recession-resistant ZrC/W-based rocket nozzle liners via the Displacive Compensation of Porosity (DCP) method Journal of Materials Science. 39: 6005-6015. DOI: 10.1023/B:Jmsc.0000041697.67626.46 |
0.368 |
|
| 2004 |
Yoo S, Akbar SA, Sandhage KH. Nanocarving of titania (TiO2): A novel approach for fabricating chemical sensing platform Ceramics International. 30: 1121-1126. DOI: 10.1016/J.Ceramint.2003.12.085 |
0.328 |
|
| 2003 |
Grzesik Z, Dickerson MB, Sandhage KH. Incongruent reduction of tungsten carbide by a zirconium-copper melt Journal of Materials Research. 18: 2135-2140. DOI: 10.1557/Jmr.2003.0299 |
0.336 |
|
| 2002 |
Dickerson MB, Snyder RL, Sandhage KH. Dense, near net-shaped, carbide/refractory metal composites at modest temperatures by the displacive compensation of porosity (DCP) method Journal of the American Ceramic Society. 85: 730-732. DOI: 10.1111/J.1151-2916.2002.Tb00164.X |
0.347 |
|
| 2002 |
Sandhage KH, Dickerson MB, Huseman PM, Caranna MA, Clifton JD, Bull TA, Heibel TJ, Overton WR, Schoenwaelder MEA. Novel, bioclastic route to self-assembled, 3D, chemically tailored meso/nanostructures: Shape-preserving reactive conversion of biosilica (diatom) microshells Advanced Materials. 14: 429-433. DOI: 10.1002/1521-4095(20020318)14:6<429::Aid-Adma429>3.0.Co;2-C |
0.392 |
|
| 2002 |
Sandhage KH, Dickerson MB, Huseman PM, Zalar FM, Carroll MC, Rondon MR, Sandhage EC. A novel hybrid route to chemically-tailored, three-dimensional oxide nanostructures: The basic (bioclastic and shape-preserving inorganic conversion) process Ceramic Engineering and Science Proceedings. 23: 653-664. |
0.32 |
|
| 2001 |
Litsky AS, Sandhage KH, Saw E, Briggs S, Gallagher PK. Near net-shape fabrication of hydroxyapatite and HA-alloy composites Key Engineering Materials. 101-114. DOI: 10.4028/Www.Scientific.Net/Kem.198-199.101 |
0.302 |
|
| 2001 |
Vilayannur S, Sandhage KH. Selective Internal Oxidation of the Noble Metal-Rich Intermetallic Compound, BaAg5 Oxidation of Metals. 55: 87-103. DOI: 10.1023/A:1010377225959 |
0.322 |
|
| 2001 |
Kumar P, Travitzky NA, Beyer P, Sandhage KH, Janssen R, Claussen N. Reactive casting of ceramic composites (r-3C) Scripta Materialia. 44: 751-757. DOI: 10.1016/S1359-6462(00)00667-9 |
0.327 |
|
| 2000 |
Detrie TJ, Sandhage KH. Fabrication of Ag/Bi2Sr2Ca1Cu2O8±x superconducting tapes by the oxidation and postoxidation (partial melt) annealing of malleable, metal-bearing precursors Journal of Materials Research. 15: 306-316. DOI: 10.1557/Jmr.2000.0049 |
0.334 |
|
| 2000 |
Saw E, Sandhage KH, Gallagher PK, Litsky AS. Near-net-shaped calcium hydroxyapatite by the oxidation of machinable, calcium-bearing precursors (the volume identical metal oxidation, or VIMOX, process) Journal of the American Ceramic Society. 83: 998-1000. DOI: 10.1111/J.1151-2916.2000.Tb01317.X |
0.312 |
|
| 2000 |
Saw E, Sandhage KH, Gallagher PK, Litsky AS. Fabrication of near net-shaped hydroxyapatite ceramics by the oxidation of solid, metal-bearing precursors Materials and Manufacturing Processes. 15: 29-45. DOI: 10.1080/10426910008912971 |
0.316 |
|
| 2000 |
Sandhage KH, Allameh SM, Kumar P, Schmutzler HJ, Viers D, Zhang XD. Near net-shaped, alkaline-earth-bearing ceramics for electronic and refractory applications via the oxidation of solid, metal-bearing precursors (the VIMOX process) Materials and Manufacturing Processes. 15: 1-28. DOI: 10.1080/10426910008912970 |
0.334 |
|
| 1999 |
Allameh SM, Sandhage KH. Fabrication Of (Ba, Pb)Tio3-Based Tapes With Positive Temperature Coefficients Of Resistivity By The Oxidation Of Malleable, Metal-Bearing Precursors (The Volume Identical Metal Oxidation Process) Journal of Materials Research. 14: 4319-4328. DOI: 10.1557/Jmr.1999.0585 |
0.313 |
|
| 1999 |
Kumar P, Dregia SA, Sandhage KH. Epitaxial growth of magnesia and spinel on sapphire during incongruent reduction in molten magnesium Journal of Materials Research. 14: 3312-3318. DOI: 10.1557/Jmr.1999.0448 |
0.328 |
|
| 1999 |
Viers DS, Sandhage KH. Near-net-shaped (Ba,Sr)Al 2Si 2O 8 bodies by the oxidation of machinable metal-bearing precursors Journal of the American Ceramic Society. 82: 249-252. DOI: 10.1111/J.1151-2916.1999.Tb01755.X |
0.338 |
|
| 1999 |
Kumar P, Sandhage KH. Displacive compensation of porosity (DCP) method for fabricating dense, shaped, high-ceramic-bearing bodies at modest temperatures Journal of Materials Science. 34: 5757-5769. DOI: 10.1023/A:1004754117195 |
0.367 |
|
| 1998 |
Kumar P, Sandhage KH. The fabrication of near net-shaped spinel bodies by the oxidative transformation of Mg/Al2O3 precursors Journal of Materials Research. 13: 3423-3435. DOI: 10.1557/Jmr.1998.0466 |
0.307 |
|
| 1998 |
Zhang X, Sandhage KH, Fraser HL. Synthesis of BaAl2Si2O8 from solid Ba–Al–Al2O3–SiO2 precursors: Part III. The structure of BaAl2Si2O8 formed by annealing at ≤650 °C and at 1650 °C Journal of Materials Research. 13: 3122-3134. DOI: 10.1557/Jmr.1998.0425 |
0.301 |
|
| 1998 |
Allameh SM, Sandhage KH. The oxidative transformation of solid, barium-metal-bearing precursors into monolithic celsian with a retention of shape, dimensions, and relative density Journal of Materials Research. 13: 1271-1285. DOI: 10.1557/Jmr.1998.0182 |
0.352 |
|
| 1997 |
Ward GA, Sandhage KH. Synthesis of barium hexaferrite by the oxidation of a metallic barium-iron precursor Journal of the American Ceramic Society. 80: 1508-1516. DOI: 10.1111/J.1151-2916.1997.Tb03010.X |
0.303 |
|
| 1996 |
Schmutzler HJ, Sandhage KH, Nava JC. Fabrication of dense, shaped barium cerate by the oxidation of solid metal-bearing precursors Journal of the American Ceramic Society. 79: 1575-1584. DOI: 10.1111/J.1151-2916.1996.Tb08767.X |
0.341 |
|
| 1995 |
Schmutzler HJ, Sandhage KH. Transformation of Ba-Al-Si precursors to celsian by high-temperature oxidation and annealing Metallurgical and Materials Transactions B. 26: 135-148. DOI: 10.1007/Bf02648986 |
0.386 |
|
| 1994 |
Schmutzler HJ, Antony MM, Sandhage KH. A Novel Reaction Path to BaTiO3 by the Oxidation of a Solid Metallic Precursor Journal of the American Ceramic Society. 77: 721-729. DOI: 10.1111/J.1151-2916.1994.Tb05356.X |
0.347 |
|
| 1993 |
Antony MM, Sandhage KH. Barium titanate/noble metal laminates prepared by the oxidation of solid metallic precursors Journal of Materials Research. 8: 2968-2977. DOI: 10.1557/Jmr.1993.2968 |
0.336 |
|
| 1992 |
Sandhage KH. The Preparation of Superconducting YBa2Cu3O7-/Ag Microlaminates by an Oscillating Oxidation Scheme Journal of the Electrochemical Society. 139: 1661-1671. DOI: 10.1149/1.2069473 |
0.334 |
|
| 1992 |
Luo JS, Merchant N, Maroni VA, Gruen DM, Tani BS, Sandhage KH, Craven CA. Growth of c-axis-oriented films of YbBa2Cu3O7-δ on single and polycrystalline MgO substrates by oxidation of a liquid alloy precursor Physica C: Superconductivity and Its Applications. 192: 356-361. DOI: 10.1016/0921-4534(92)90841-Y |
0.311 |
|
| 1991 |
Luo JS, Merchant N, Maroni VA, Gruen DM, Tani BS, Sandhage KH, Craven CA. Synthesis of C-oriented YbBa2Cu3O7-δ Films on Single and Polycrystalline Substrates by Oxidation of Liquid Alloys Mrs Proceedings. 249. DOI: 10.1557/Proc-249-195 |
0.309 |
|
| 1991 |
Sandhage KH, Carter W, Masur L, Joshi C, Hsu H, Yurek GJ. Synthesis of a Ba-Pb-Bi-O/Ag superconducting composite by the oxidation of a Ba-Pb-Bi-Ag metallic precursor Physica C: Superconductivity and Its Applications. 177: 95-100. DOI: 10.1016/0921-4534(91)90303-G |
0.306 |
|
| Show low-probability matches. |