Year |
Citation |
Score |
2020 |
Neumayer SM, Susner MA, McGuire M, Pantelides ST, Kalnaus S, Maksymovych P, Balke N. Lowering of TC in van der Waals Layered Materials Under In-Plane Strain. Ieee Transactions On Ultrasonics, Ferroelectrics, and Frequency Control. PMID 32746203 DOI: 10.1109/Tuffc.2020.3007290 |
0.302 |
|
2020 |
Yan S, Deng J, Bae C, Kalnaus S, Xiao X. Orthotropic Viscoelastic Modeling of Polymeric Battery Separator Journal of the Electrochemical Society. 167: 090530. DOI: 10.1149/1945-7111/Ab8A99 |
0.34 |
|
2020 |
Palmer MJ, Kalnaus S, Dixit MB, Westover AS, Hatzell KB, Dudney NJ, Chen XC. A three-dimensional interconnected polymer/ceramic composite as a thin film solid electrolyte Energy Storage Materials. 26: 242-249. DOI: 10.1016/J.Ensm.2019.12.031 |
0.34 |
|
2019 |
Westover AS, Dudney NJ, Sacci RL, Kalnaus S. Deposition and Confinement of Li Metal along an Artificial Lipon–Lipon Interface Acs Energy Letters. 4: 651-655. DOI: 10.1021/Acsenergylett.8B02542 |
0.327 |
|
2019 |
Kalnaus S, Wang H, Watkins TR, Simunovic S, Sengupta A. Features of mechanical behavior of EV battery modules under high deformation rate Extreme Mechanics Letters. 32: 100550. DOI: 10.1016/J.Eml.2019.100550 |
0.386 |
|
2018 |
Kalnaus S, Wang H, Watkins TR, Kumar A, Simunovic S, Turner JA, Gorney P. Effect of packaging and cooling plates on mechanical response and failure characteristics of automotive Li-ion battery modules Journal of Power Sources. 403: 20-26. DOI: 10.1016/J.Jpowsour.2018.09.071 |
0.352 |
|
2018 |
Kalnaus S, Kumar A, Wang Y, Li J, Simunovic S, Turner JA, Gorney P. Strain distribution and failure mode of polymer separators for Li-ion batteries under biaxial loading Journal of Power Sources. 378: 139-145. DOI: 10.1016/J.Jpowsour.2017.12.029 |
0.376 |
|
2018 |
Kalnaus S, Wang Y, Li J, Kumar A, Turner JA. Temperature and strain rate dependent behavior of polymer separator for Li-ion batteries Extreme Mechanics Letters. 20: 73-80. DOI: 10.1016/J.Eml.2018.01.006 |
0.355 |
|
2018 |
David L, Ruther RE, Mohanty D, Meyer HM, Sheng Y, Kalnaus S, Daniel C, Wood DL. Identifying degradation mechanisms in lithium-ion batteries with coating defects at the cathode Applied Energy. 231: 446-455. DOI: 10.1016/J.Apenergy.2018.09.073 |
0.317 |
|
2017 |
An SJ, Li J, Daniel C, Kalnaus S, Wood DL. Design and Demonstration of Three-Electrode Pouch Cells for Lithium-Ion Batteries Journal of the Electrochemical Society. 164: A1755-A1764. DOI: 10.1149/2.0031709Jes |
0.336 |
|
2017 |
Veith GM, Armstrong BL, Wang H, Kalnaus S, Tenhaeff WE, Patterson ML. Shear Thickening Electrolytes for High Impact Resistant Batteries Acs Energy Letters. 2: 2084-2088. DOI: 10.1021/Acsenergylett.7B00511 |
0.353 |
|
2017 |
Kalnaus S, Wang Y, Turner JA. Mechanical behavior and failure mechanisms of Li-ion battery separators Journal of Power Sources. 348: 255-263. DOI: 10.1016/J.Jpowsour.2017.03.003 |
0.369 |
|
2017 |
Wang H, Kumar A, Simunovic S, Allu S, Kalnaus S, Turner JA, Helmers JC, Rules ET, Winchester CS, Gorney P. Progressive mechanical indentation of large-format Li-ion cells Journal of Power Sources. 341: 156-164. DOI: 10.1016/J.Jpowsour.2016.11.094 |
0.378 |
|
2017 |
Mei J, Dong P, Kalnaus S, Jiang Y, Wei Z. A path-dependent fatigue crack propagation model under non-proportional modes I and III loading conditions Engineering Fracture Mechanics. 182: 202-214. DOI: 10.1016/J.Engfracmech.2017.07.026 |
0.418 |
|
2017 |
Li J, Du Z, Ruther RE, AN SJ, David LA, Hays K, Wood M, Phillip ND, Sheng Y, Mao C, Kalnaus S, Daniel C, Wood DL. Toward Low-Cost, High-Energy Density, and High-Power Density Lithium-Ion Batteries Jom. 69: 1484-1496. DOI: 10.1007/S11837-017-2404-9 |
0.307 |
|
2017 |
Du Z, Wood DL, Daniel C, Kalnaus S, Li J. Understanding limiting factors in thick electrode performance as applied to high energy density Li-ion batteries Journal of Applied Electrochemistry. 47: 405-415. DOI: 10.1007/S10800-017-1047-4 |
0.36 |
|
2016 |
Kumar A, Kalnaus S, Simunovic S, Gorti S, Allu S, Turner JA. Communication - Indentation of Li-Ion Pouch Cell: Effect of material homogenization on prediction of internal short circuit Journal of the Electrochemical Society. 163: A2494-A2496. DOI: 10.1149/2.0151613Jes |
0.335 |
|
2016 |
Allu S, Kalnaus S, Simunovic S, Nanda J, Turner JA, Pannala S. A three-dimensional meso-macroscopic model for Li-Ion intercalation batteries Journal of Power Sources. 325: 42-50. DOI: 10.1016/J.Jpowsour.2016.06.001 |
0.352 |
|
2016 |
Es-Said OS, Alcisto J, Guerra J, Jones E, Dominguez A, Hahn M, Ula N, Zeng L, Ramsey B, Mulazimoglu H, Li YJ, Miller M, Alrashid J, Papakyriakou M, Kalnaus S, et al. Effect of Cadmium Plating Thickness on the Charpy Impact Energy of Hydrogen-Charged 4340 Steel Journal of Materials Engineering and Performance. 25: 3606-3614. DOI: 10.1007/S11665-016-2246-6 |
0.314 |
|
2015 |
Pannala S, Turner JA, Allu S, Elwasif WR, Kalnaus S, Simunovic S, Kumar A, Billings JJ, Wang H, Nanda J. Multiscale modeling and characterization for performance and safety of lithium-ion batteries Journal of Applied Physics. 118. DOI: 10.1063/1.4927817 |
0.349 |
|
2014 |
Allu S, Kalnaus S, Elwasif W, Simunovic S, Turner JA, Pannala S. A new open computational framework for highly-resolved coupled three-dimensional multiphysics simulations of Li-ion cells Journal of Power Sources. 246: 876-886. DOI: 10.1016/J.Jpowsour.2013.08.040 |
0.312 |
|
2013 |
Mohanty D, Sefat AS, Kalnaus S, Li J, Meisner RA, Andrew Payzant E, Abraham DP, Wood DL, Daniel C. Investigating phase transformation in the Li1.2Co 0.1Mn0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold (4.5 V) via magnetic, X-ray diffraction and electron microscopy studies Journal of Materials Chemistry A. 1: 6249-6261. DOI: 10.1039/C3Ta10304H |
0.326 |
|
2013 |
Mohanty D, Kalnaus S, Meisner RA, Safat AS, Li J, Payzant EA, Rhodes K, Wood DL, Daniel C. Structural transformation in a Li1.2Co0.1Mn 0.55Ni0.15O2 lithium-ion battery cathode during high-voltage hold Rsc Advances. 3: 7479-7485. DOI: 10.1039/C3Ra40510A |
0.313 |
|
2013 |
Kalnaus S, Tenhaeff WE, Sakamoto J, Sabau AS, Daniel C, Dudney NJ. Analysis of composite electrolytes with sintered reinforcement structure for energy storage applications Journal of Power Sources. 241: 178-185. DOI: 10.1016/J.Jpowsour.2013.04.096 |
0.302 |
|
2013 |
Mohanty D, Kalnaus S, Meisner RA, Rhodes KJ, Li J, Payzant EA, Wood DL, Daniel C. Structural transformation of a lithium-rich Li1.2Co 0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction Journal of Power Sources. 229: 239-248. DOI: 10.1016/J.Jpowsour.2012.11.144 |
0.344 |
|
2013 |
Park J, Kalnaus S, Han S, Lee YK, Less GB, Dudney NJ, Daniel C, Sastry AM. In situ atomic force microscopy studies on lithium (de)intercalation-induced morphology changes in LixCoO2 micro-machined thin film electrodes Journal of Power Sources. 222: 417-425. DOI: 10.1016/J.Jpowsour.2012.09.017 |
0.37 |
|
2013 |
Weng L, Zhang J, Kalnaus S, Feng M, Jiang Y. Corrosion fatigue crack growth of AISI 4340 steel International Journal of Fatigue. 48: 156-164. DOI: 10.1016/J.Ijfatigue.2012.10.015 |
0.594 |
|
2012 |
Kalnaus S, Sabau AS, Tenhaeff WE, Dudney NJ, Daniel C. Design of composite polymer electrolytes for Li ion batteries based on mechanical stability criteria Journal of Power Sources. 201: 280-287. DOI: 10.1016/J.Jpowsour.2011.11.020 |
0.355 |
|
2011 |
Guo S, Jesse S, Kalnaus S, Balke N, Daniel C, Kalinin SV. Direct mapping of ion diffusion times on LiCoO 2 surfaces with nanometer resolution Journal of the Electrochemical Society. 158. DOI: 10.1149/1.3604759 |
0.315 |
|
2011 |
Kalnaus S, Rhodes K, Daniel C. A study of lithium ion intercalation induced fracture of silicon particles used as anode material in Li-ion battery Journal of Power Sources. 196: 8116-8124. DOI: 10.1016/J.Jpowsour.2011.05.049 |
0.346 |
|
2011 |
Zhang J, Kalnaus S, Behrooz M, Jiang Y. Effect of loading history on stress corrosion cracking of 7075-T651 aluminum alloy in saline aqueous environment Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 448-460. DOI: 10.1007/S11661-010-0419-8 |
0.592 |
|
2011 |
Kalnaus S, Zhang J, Jiang Y. Stress-corrosion cracking of AISI 4340 steel in aqueous environments Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 434-447. DOI: 10.1007/S11661-010-0335-Y |
0.58 |
|
2009 |
Kalnaus S, Fan F, Jiang Y, Vasudevan AK. An experimental investigation of fatigue crack growth of stainless steel 304L International Journal of Fatigue. 31: 840-849. DOI: 10.1016/J.Ijfatigue.2008.11.004 |
0.442 |
|
2008 |
Kalnaus S, Fan F, Jiang Y. Fatigue and cyclic plasticity properties of a super-austenitic stainless steel American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 6: 93-101. DOI: 10.1115/PVP2007-26478 |
0.358 |
|
2008 |
Kalnaus S, Jiang Y. Fatigue of AL6XN stainless steel Journal of Engineering Materials and Technology, Transactions of the Asme. 130: 0310131-03101312. DOI: 10.1115/1.2931154 |
0.515 |
|
2008 |
Fan F, Kalnaus S, Jiang Y. Modeling of fatigue crack growth of stainless steel 304L Mechanics of Materials. 40: 961-973. DOI: 10.1016/J.Mechmat.2008.06.001 |
0.452 |
|
2008 |
Kalnaus S, Fan F, Vasudevan AK, Jiang Y. An experimental investigation on fatigue crack growth of AL6XN stainless steel Engineering Fracture Mechanics. 75: 2002-2019. DOI: 10.1016/J.Engfracmech.2007.11.002 |
0.429 |
|
2006 |
Kalnaus S, Jiang Y. Fatigue life prediction of copper single crystals using a critical plane approach Engineering Fracture Mechanics. 73: 684-696. DOI: 10.1016/J.Engfracmech.2005.11.003 |
0.399 |
|
Show low-probability matches. |