| Year |
Citation |
Score |
| Low-probability matches (unlikely to be authored by this person) |
| 2024 |
Zhuang X, Fan H, Li X, Dong Y, Wang S, Zhao B, Wu S. Transfer and accumulation of antibiotic resistance genes and bacterial pathogens in the mice gut due to consumption of organic foods. The Science of the Total Environment. 169842. PMID 38215844 DOI: 10.1016/j.scitotenv.2023.169842 |
0.01 |
|
| 2023 |
Li X, Wu S, Fan H, Dong Y, Wang Y, Bai Z, Jing C, Zhuang X. Phylogenetic distance affects the artificial microbial consortia's effectiveness and colonization during the bioremediation of polluted soil with Cr(VI) and atrazine. Journal of Hazardous Materials. 454: 131460. PMID 37141777 DOI: 10.1016/j.jhazmat.2023.131460 |
0.01 |
|
| 2023 |
Wu S, Dong Y, Stoeck T, Wang S, Fan H, Wang Y, Zhuang X. Geographic characteristics and environmental variables determine the diversities and assembly of the algal communities in interconnected river-lake system. Water Research. 233: 119792. PMID 36868116 DOI: 10.1016/j.watres.2023.119792 |
0.01 |
|
| 2022 |
Wu S, Li X, Fan H, Dong Y, Wang Y, Bai Z, Zhuang X. Engineering artificial microbial consortia based on division of labor promoted simultaneous removal of Cr(VI)-atrazine combined pollution. Journal of Hazardous Materials. 443: 130221. PMID 36367470 DOI: 10.1016/j.jhazmat.2022.130221 |
0.01 |
|
| 2022 |
Zhuang X, Wang Y, Wang H, Dong Y, Li X, Wang S, Fan H, Wu S. Comparison of the efficiency and microbial mechanisms of chemical- and bio-surfactants in remediation of petroleum hydrocarbon. Environmental Pollution (Barking, Essex : 1987). 314: 120198. PMID 36165831 DOI: 10.1016/j.envpol.2022.120198 |
0.01 |
|
| 2022 |
Lin X, Qin X, Wu X, Liao Y, Yu Y, Xie Q, Tang S, Guo C, Pei J, Wu Z, Cai C, Wang F, Wu S, Chen H, Liu X, et al. Markedly Increasing Antibiotic Resistance and Dual Treatment of Neisseria gonorrhoeae Isolates in Guangdong, China, from 2013 to 2020. Antimicrobial Agents and Chemotherapy. e0229421. PMID 35345891 DOI: 10.1128/aac.02294-21 |
0.01 |
|
| 2022 |
Wang Y, Wu S, Wang H, Dong Y, Li X, Wang S, Fan H, Zhuang X. Optimization of conditions for a surfactant-producing strain and application to petroleum hydrocarbon-contaminated soil bioremediation. Colloids and Surfaces. B, Biointerfaces. 213: 112428. PMID 35231686 DOI: 10.1016/j.colsurfb.2022.112428 |
0.01 |
|
| 2022 |
Wu S, Bohu T, Dong Y, Wang S, Zhao S, Fan H, Zhuang X. The Immediate Hotspot of Microbial Nitrogen Cycling in an Oil-Seed Rape ( L.) Soil System Is the Bulk Soil Rather Than the Rhizosphere after Biofertilization. Microorganisms. 10. PMID 35208702 DOI: 10.3390/microorganisms10020247 |
0.01 |
|
| 2022 |
Zhang N, Zhang Y, Bohu T, Wu S, Bai Z, Zhuang X. Nitrogen Removal Characteristics and Constraints of an with Potential for High Nitrogen Content Heterotrophic Nitrification-Aerobic Denitrification. Microorganisms. 10. PMID 35208689 DOI: 10.3390/microorganisms10020235 |
0.01 |
|
| 2022 |
Sun H, Wu S, Feng S, Jiang C, Wang R, Xu S, Cui L, Zhuang X. Impact of influent strengths on nitrous oxide emission and its molecular mechanism in constructed wetlands treating swine wastewater. Environmental Research. 112957. PMID 35167854 DOI: 10.1016/j.envres.2022.112957 |
0.01 |
|
| 2022 |
Wu S, Dong Y, Deng Y, Cui L, Zhuang X. Protistan consumers and phototrophs are more sensitive than bacteria and fungi to pyrene exposure in soil. The Science of the Total Environment. 153539. PMID 35104532 DOI: 10.1016/j.scitotenv.2022.153539 |
0.01 |
|
| 2021 |
Dong Y, Wu S, Fan H, Li X, Li Y, Xu S, Bai Z, Zhuang X. Ecological selection of bacterial taxa with larger genome sizes in response to polycyclic aromatic hydrocarbons stress. Journal of Environmental Sciences (China). 112: 82-93. PMID 34955225 DOI: 10.1016/j.jes.2021.04.027 |
0.01 |
|
| 2021 |
Fan H, Wu S, Dong W, Li X, Dong Y, Wang S, Zhu YG, Zhuang X. Characterization of tetracycline-resistant microbiome in soil-plant systems by combination of HO-based DNA-Stable isotope probing and metagenomics. Journal of Hazardous Materials. 420: 126440. PMID 34280721 DOI: 10.1016/j.jhazmat.2021.126440 |
0.01 |
|
| 2021 |
Dong Y, Wu S, Deng Y, Wang S, Fan H, Li X, Bai Z, Zhuang X. Distinct Functions and Assembly Mechanisms of Soil Abundant and Rare Bacterial Taxa Under Increasing Pyrene Stresses. Frontiers in Microbiology. 12: 689762. PMID 34276621 DOI: 10.3389/fmicb.2021.689762 |
0.01 |
|
| 2021 |
Zhou S, Xu S, Jiang Y, Jiang C, Wang D, Xu G, Yang D, Wu S, Bai Z, Zhuang G, Zhuang X. Enhancing nitrogen removal from anaerobically-digested swine wastewater through integration of Myriophyllum aquaticum and free nitrous acid-based technology in a constructed wetland. The Science of the Total Environment. 779: 146441. PMID 34030237 DOI: 10.1016/j.scitotenv.2021.146441 |
0.01 |
|
| 2021 |
Liu Y, Gao J, Bai Z, Wu S, Li X, Wang N, Du X, Fan H, Zhuang G, Bohu T, Zhuang X. Unraveling Mechanisms and Impact of Microbial Recruitment on Oilseed Rape ( L.) and the Rhizosphere Mediated by Plant Growth-Promoting Rhizobacteria. Microorganisms. 9. PMID 33445684 DOI: 10.3390/microorganisms9010161 |
0.01 |
|
| 2021 |
Li Y, Wu S, Wang S, Zhao S, Zhuang X. Anaerobic degradation of xenobiotic organic contaminants (XOCs): The role of electron flow and potential enhancing strategies. Journal of Environmental Sciences (China). 101: 397-412. PMID 33334534 DOI: 10.1016/j.jes.2020.08.030 |
0.01 |
|
| 2021 |
Nie G, Sheng P, Li Y, Zuo F, Bao Y, Wu S. Enhanced mechanical and thermal properties of AlN ceramics via a chemical precipitation process International Journal of Applied Ceramic Technology. 18: 1255-1268. DOI: 10.1111/IJAC.13742 |
0.01 |
|
| 2021 |
Tan Y, Chen P, Zhu Z, Wu S, Tian Z. Plasma etching behavior of yttrium‐aluminum oxide composite ceramics International Journal of Applied Ceramic Technology. 18: 1710-1715. DOI: 10.1111/IJAC.13712 |
0.01 |
|
| 2021 |
Li Y, Wang S, Wang M, Zhang X, Lu B, Wang Y, Dong D, He F, Liu W, Wu S. Three-dimensional printing of blue-colored zirconia accessories using digital light processing-based stereolithography Journal of Asian Ceramic Societies. 9: 727-732. DOI: 10.1080/21870764.2021.1913912 |
0.01 |
|
| 2021 |
Tan Y, Wang Y, Wu S, Chen P, Zhu Z, Tian Z. Sputtering resistance and damage mechanism of Y2O3-based ceramics etching by Xe plasma Materials Today Communications. 26: 101775. DOI: 10.1016/j.mtcomm.2020.101775 |
0.01 |
|
| 2021 |
Liu J, Deng X, Zhou L, Chen J, Huang M, Wu S, Liu B. Microstructures and mechanical properties of the bilayer functionally graded WC-TiC-Ni/Co cemented carbides Materials Chemistry and Physics. 263: 124419. DOI: 10.1016/J.MATCHEMPHYS.2021.124419 |
0.01 |
|
| 2021 |
Zhang W, Zhang Y, Guo W, Xu L, You Y, Sun S, Lin H, Wu S. Powder synthesis, densification, microstructure and mechanical properties of Hf-based ternary boride ceramics Journal of the European Ceramic Society. 41: 3922-3928. DOI: 10.1016/J.JEURCERAMSOC.2021.02.045 |
0.01 |
|
| 2021 |
Tan Y, Zhang J, Chen P, Zhu Z, Wu S, Tian Z. Zirconia-strengthened yttria ceramics for plasma chamber applications Ceramics International. 47: 7448-7456. DOI: 10.1016/j.ceramint.2020.11.085 |
0.01 |
|
| 2021 |
Zhou J, Allonas X, Liu X, Wu S. Facile modification on the oxygen‐inhibited layer of photopolymerized acrylates via aza‐
Michael
addition Polymer International. 70: 845-850. DOI: 10.1002/PI.6174 |
0.01 |
|
| 2020 |
Lin HW, Chang EH, Ko Y, Wang CY, Wang YS, Mafruhah OR, Wu SH, Chen YC, Huang YM. Conceptualization, Development and Psychometric Evaluations of a New Medication-Related Health Literacy Instrument: The Chinese Medication Literacy Measurement. International Journal of Environmental Research and Public Health. 17. PMID 32977520 DOI: 10.3390/ijerph17196951 |
0.01 |
|
| 2020 |
Fan H, Wu S, Woodley J, Zhuang G, Bai Z, Xu S, Wang X, Zhuang X. Effective removal of antibiotic resistance genes and potential links with archaeal communities during vacuum-type composting and positive-pressure composting. Journal of Environmental Sciences (China). 89: 277-286. PMID 31892399 DOI: 10.1016/j.jes.2019.09.006 |
0.01 |
|
| 2020 |
Tian Z, Wang Y, Zhang Z, Duan X, Jia D, Wu S. Preparation of highly oriented h-BN based textured ceramics via grain rearrangement under DLP printing and low-pressure sintering Materials Letters. 268: 127584. DOI: 10.1016/j.matlet.2020.127584 |
0.01 |
|
| 2020 |
Lin L, Wu H, Xu Y, Lin K, Zou W, Wu S. Fabrication of dense aluminum nitride ceramics via digital light processing-based stereolithography Materials Chemistry and Physics. 249: 122969. DOI: 10.1016/j.matchemphys.2020.122969 |
0.01 |
|
| 2020 |
Tian Z, Wang Y, Zhang Z, Duan X, Jia D, Wu S. The effects of holding time on grain size, orientation degree and properties of h-BN matrix textured ceramics Materials Chemistry and Physics. 248: 122916. DOI: 10.1016/j.matchemphys.2020.122916 |
0.01 |
|
| 2020 |
Chen J, Zhou L, Deng X, Liu W, Liu J, Ji H, Wu S, Liang J, Ou J, Liu B. Role of Co content on the gradient microstructure evolution and mechanical properties of bilayer functionally graded cemented carbides Materials Chemistry and Physics. 248: 122910. DOI: 10.1016/j.matchemphys.2020.122910 |
0.01 |
|
| 2020 |
Wu H, Liu W, Lin L, Li Y, Tian Z, Nie G, An D, Li H, Wang C, Xie Z, Wu S. Sintering kinetics involving densification and grain growth of 3D printed Ce–ZrO2/Al2O3 Materials Chemistry and Physics. 239: 122069. DOI: 10.1016/j.matchemphys.2019.122069 |
0.01 |
|
| 2020 |
Yang P, Xu F, Li J, Wu H, Nie G, Shao Y, Wu S. The impact of oxygen impurity and La doping on thermodynamic properties of Si3N4 ceramic: A first-principle calculation approach Journal of the European Ceramic Society. 40: 5293-5297. DOI: 10.1016/j.jeurceramsoc.2020.07.034 |
0.01 |
|
| 2020 |
Nie G, Li Y, Sheng P, Tian Z, Liu W, Wu H, Bao Y, Wu S. Fabrication of Al2O3/AlN composite ceramics with enhanced performance via a heterogeneous precipitation coating process Ceramics International. 46: 21156-21165. DOI: 10.1016/j.ceramint.2020.05.193 |
0.01 |
|
| 2019 |
Cheng J, Chen Y, Wu JW, Ji XR, Wu SH. 3D Printing of BaTiO Piezoelectric Ceramics for a Focused Ultrasonic Array. Sensors (Basel, Switzerland). 19. PMID 31547206 DOI: 10.3390/s19194078 |
0.01 |
|
| 2019 |
Liang S, Liu H, Wu S, Xu S, Jin D, Faiola F, Zhuang X, Zhuang G, Qu D, Fan H, Bai Z. Genetic diversity of diazotrophs and total bacteria in the phyllosphere of , , , and . Canadian Journal of Microbiology. 1-11. PMID 31241350 DOI: 10.1139/cjm-2018-0588 |
0.01 |
|
| 2019 |
Jiang C, Xu S, Wang R, Feng S, Zhou S, Wu S, Zeng X, Wu S, Bai Z, Zhuang G, Zhuang X. Achieving efficient nitrogen removal from real sewage via nitrite pathway in a continuous nitrogen removal process by combining free nitrous acid sludge treatment and DO control. Water Research. 161: 590-600. PMID 31238224 DOI: 10.1016/j.watres.2019.06.040 |
0.01 |
|
| 2019 |
Jiang QG, Cao C, Lin TC, Wu S, Li X. Strong and Tough Glass with Self-Dispersed Nanoparticles via Solidification. Advanced Materials (Deerfield Beach, Fla.). e1901803. PMID 31222850 DOI: 10.1002/Adma.201901803 |
0.01 |
|
| 2019 |
Sun H, Xu S, Wu S, Wang R, Zhuang G, Bai Z, Deng Y, Zhuang X. Enhancement of facultative anaerobic denitrifying communities by oxygen release from roots of the macrophyte in constructed wetlands. Journal of Environmental Management. 246: 157-163. PMID 31176180 DOI: 10.1016/j.jenvman.2019.05.136 |
0.01 |
|
| 2019 |
Bi YL, Wu SM, Zhou SN, Wu SH, Su H, Bai ZH, Xu SJ. [Allelopathic Effects and Allelochemicals of on and ]. Huan Jing Ke Xue= Huanjing Kexue. 40: 2265-2270. PMID 31087865 DOI: 10.13227/j.hjkx.201810064 |
0.01 |
|
| 2019 |
Pourat N, Chen X, Wu SH, Davis AC. Timely Outpatient Follow-up Is Associated with Fewer Hospital Readmissions among Patients with Behavioral Health Conditions. Journal of the American Board of Family Medicine : Jabfm. 32: 353-361. PMID 31068399 DOI: 10.3122/jabfm.2019.03.180244 |
0.01 |
|
| 2019 |
Tian Z, Yang Y, Wang Y, Wu H, Liu W, Wu S. Fabrication and properties of a high porosity h-BN–SiO2 ceramics fabricated by stereolithography-based 3D printing Materials Letters. 236: 144-147. DOI: 10.1016/J.MATLET.2018.10.058 |
0.01 |
|
| 2019 |
Li Y, Wang M, Wu H, He F, Chen Y, Wu S. Cure behavior of colorful ZrO2 suspensions during Digital light processing (DLP) based stereolithography process Journal of the European Ceramic Society. 39: 4921-4927. DOI: 10.1016/J.JEURCERAMSOC.2019.07.035 |
0.01 |
|
| 2019 |
Chen J, Huang M, Fang ZZ, Koopman M, Liu W, Deng X, Zhao Z, Chen S, Wu S, Liu J, Qi W, Wang Z. Microstructure analysis of high density WC-Co composite prepared by one step selective laser melting International Journal of Refractory Metals and Hard Materials. 84: 104980. DOI: 10.1016/J.Ijrmhm.2019.104980 |
0.01 |
|
| 2019 |
Tian Z, Yang Y, Wang Y, Wu H, Liu W, Wu S. Thermal shock resistance of rare-earth doped in-situ SiAlON reinforced h-BN matrix ceramics under vacuum thermal cycling Ceramics International. 45: 20121-20127. DOI: 10.1016/J.CERAMINT.2019.06.277 |
0.01 |
|
| 2019 |
Wang B, Jiang Q, Liu W, Zhu Z, Liu J, Wu H, Guo W, Wu S. Fabrication of fine-grained α/β Si3N4 by Hot Pressing Flowing Sintering at 1550 °C Ceramics International. 45: 13958-13963. DOI: 10.1016/J.CERAMINT.2019.04.094 |
0.01 |
|
| 2019 |
Liu W, Tong W, Lu X, Wu S. Effects of different types of rare earth oxide additives on the properties of silicon nitride ceramic substrates Ceramics International. 45: 12436-12442. DOI: 10.1016/J.CERAMINT.2019.03.176 |
0.01 |
|
| 2019 |
Huang R, Jiang Q, Wu H, Li Y, Liu W, Lu X, Wu S. Fabrication of complex shaped ceramic parts with surface-oxidized Si3N4 powder via digital light processing based stereolithography method Ceramics International. 45: 5158-5162. DOI: 10.1016/J.CERAMINT.2018.11.116 |
0.01 |
|
| 2019 |
Wu H, Liu W, Lin L, Li L, Li Y, Tian Z, Zhao Z, Ji X, Xie Z, Wu S. Preparation of alumina-toughened zirconia via 3D printing and liquid precursor infiltration: manipulation of the microstructure, the mechanical properties and the low temperature aging behavior Journal of Materials Science. 54: 7447-7459. DOI: 10.1007/s10853-019-03432-9 |
0.01 |
|
| 2018 |
Wu X, Qin X, Huang J, Wang F, Li M, Wu Z, Liu X, Pei J, Wu S, Chen H, Guo C, Xue Y, Tang S, Fang M, Lan Y, et al. Determining the in vitro susceptibility of Neisseria gonorrhoeae isolates from 8 cities in Guangdong Province through an improved microdilution method. Diagnostic Microbiology and Infectious Disease. PMID 30292397 DOI: 10.1016/j.diagmicrobio.2018.06.004 |
0.01 |
|
| 2018 |
Xu S, Feng S, Sun H, Wu S, Zhuang G, Deng Y, Bai Z, Jing C, Zhuang X. Linking N2O emissions from biofertilizer-amended soil of tea plantations to the abundance and structure of N2O-reducing microbial communities. Environmental Science & Technology. PMID 30199630 DOI: 10.1021/Acs.Est.8B04935 |
0.01 |
|
| 2018 |
Wu S, Xu S, Chen X, Sun H, Hu M, Bai Z, Zhuang G, Zhuang X. Bacterial Communities Changes during Food Waste Spoilage. Scientific Reports. 8: 8220. PMID 29844418 DOI: 10.1038/s41598-018-26494-2 |
0.01 |
|
| 2018 |
Zhang H, Wu S, Shi Z, Wang S, Lu W, Wu Y, Sun P, Xu Q. [Toxoplasma gondii ROP38 promotes the maturation of dendritic cells mediated by TLR4]. Xi Bao Yu Fen Zi Mian Yi Xue Za Zhi = Chinese Journal of Cellular and Molecular Immunology. 34: 199-204. PMID 29773099 |
0.01 |
|
| 2018 |
Tian Y, Lu T, He F, Xu Y, Shi H, Shi X, Zuo F, Wu S, Ye J. β-tricalcium phosphate composite ceramics with high compressive strength, enhanced osteogenesis and inhibited osteoclastic activities. Colloids and Surfaces. B, Biointerfaces. 167: 318-327. PMID 29679808 DOI: 10.1016/j.colsurfb.2018.04.028 |
0.01 |
|
| 2018 |
Wang X, Xu S, Wu S, Feng S, Bai Z, Zhuang G, Zhuang X. Effect of Trichoderma viride biofertilizer on ammonia volatilization from an alkaline soil in Northern China. Journal of Environmental Sciences (China). 66: 199-207. PMID 29628087 DOI: 10.1016/j.jes.2017.05.016 |
0.01 |
|
| 2018 |
Liu W, Wu H, Tian Z, Li Y, Zhao Z, Huang M, Deng X, Xie Z, Wu S. 3D printing of dense structural ceramic microcomponents with low cost: Tailoring the sintering kinetics and the microstructure evolution Journal of the American Ceramic Society. 102: 2257-2262. DOI: 10.1111/JACE.16241 |
0.01 |
|
| 2018 |
He F, Tian Y, Fang X, Lu T, Li J, Shi X, Wu S, Zuo F, Ye J. Fabrication of β‐tricalcium phosphate composite ceramic scaffolds based on spheres prepared by extrusion‐spheronization Journal of the American Ceramic Society. 101: 5811-5826. DOI: 10.1111/JACE.15819 |
0.01 |
|
| 2018 |
Wu H, Liu W, Huang R, He R, Huang M, An D, Li H, Jiang Q, Tian Z, Ji X, Xie Z, Wu S. Fabrication of high-performance Al2O3-ZrO2 composite by a novel approach that integrates stereolithography-based 3D printing and liquid precursor infiltration Materials Chemistry and Physics. 209: 31-37. DOI: 10.1016/J.MATCHEMPHYS.2018.01.059 |
0.01 |
|
| 2018 |
Wu Z, Liu W, Wu H, Huang R, He R, Jiang Q, Chen Y, Ji X, Tian Z, Wu S. Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method Materials Chemistry and Physics. 207: 1-10. DOI: 10.1016/J.MATCHEMPHYS.2017.12.021 |
0.01 |
|
| 2018 |
Chen Y, Bao X, Wong C, Cheng J, Wu H, Song H, Ji X, Wu S. PZT ceramics fabricated based on stereolithography for an ultrasound transducer array application Ceramics International. 44: 22725-22730. DOI: 10.1016/J.CERAMINT.2018.09.055 |
0.01 |
|
| 2018 |
Zhou Y, Zhang T, Xu K, Zhang F, Bai K, Huang H, Wu S, Luo S. Effect of Y2O3 addition on microstructure and mechanical properties of spark plasma sintered AlMgB14 and AlMgB14-TiB2 Ceramics International. 44: 8591-8598. DOI: 10.1016/J.CERAMINT.2018.02.073 |
0.01 |
|
| 2018 |
He R, Liu W, Wu Z, An D, Huang M, Wu H, Jiang Q, Ji X, Wu S, Xie Z. Fabrication of complex-shaped zirconia ceramic parts via a DLP- stereolithography-based 3D printing method Ceramics International. 44: 3412-3416. DOI: 10.1016/J.CERAMINT.2017.11.135 |
0.01 |
|
| 2018 |
Liu W, Chu Q, He R, Huang M, Wu H, Jiang Q, Chen J, Deng X, Wu S. Preparation and properties of TiAlN coatings on silicon nitride ceramic cutting tools Ceramics International. 44: 2209-2215. DOI: 10.1016/J.CERAMINT.2017.10.177 |
0.01 |
|
| 2017 |
Wu S, Zhuang G, Bai Z, Cen Y, Xu S, Sun H, Han X, Zhuang X. Mitigation of nitrous oxide emissions from acidic soils by Bacillus amyloliquefaciens, a plant growth-promoting bacterium. Global Change Biology. PMID 29251817 DOI: 10.1111/gcb.14025 |
0.01 |
|
| 2017 |
Xu S, Jiang C, Ma S, Wu S, Bai Z, Zhuang G, Zhuang X. The performance and archaeal community shifts in a modified anaerobic baffled reactor treating sweet potato starch wastewater at ambient temperatures. Scientific Reports. 7: 14734. PMID 29116213 DOI: 10.1038/s41598-017-15421-6 |
0.01 |
|
| 2017 |
Sun H, Liu F, Xu S, Wu S, Zhuang G, Deng Y, Wu J, Zhuang X. Myriophyllum aquaticum Constructed Wetland Effectively Removes Nitrogen in Swine Wastewater. Frontiers in Microbiology. 8: 1932. PMID 29056931 DOI: 10.3389/fmicb.2017.01932 |
0.01 |
|
| 2017 |
Xu S, Zhou S, Ma S, Jiang C, Wu S, Bai Z, Zhuang G, Zhuang X. Manipulation of nitrogen leaching from tea field soil using a Trichoderma viride biofertilizer. Environmental Science and Pollution Research International. PMID 28986732 DOI: 10.1007/s11356-017-0355-x |
0.01 |
|
| 2017 |
He F, Qian G, Ren W, Li J, Fan P, Shi H, Shi X, Deng X, Wu S, Ye J. Fabrication of β-tricalcium phosphate composite ceramic sphere-based scaffolds with hierarchical pore structure for bone regeneration. Biofabrication. PMID 28361794 DOI: 10.1088/1758-5090/aa6a62 |
0.01 |
|
| 2017 |
Yumei Z, Fenglin Z, Li P, Kun B, Wu S, Shaoming L. Synthesis and characterization of AlMgB14 hot pressed under different environments Science of Sintering. 49: 311-317. DOI: 10.2298/SOS1703311Y |
0.01 |
|
| 2017 |
Lu J, Zhang F, Zhou Y, Huang H, Wang C, Wu S, Lin H. Fabrication of Ni-Al/diamond composite based on layered and gradient structures of SHS system Science of Sintering. 49: 149-158. DOI: 10.2298/SOS1702149L |
0.01 |
|
| 2017 |
Jiang Q, Guo W, Liu W, Gu S, Cheng L, Liu J, Zhou M, Wu S. Influence of powder characteristics on hot-pressed Si3N4 ceramics Science of Sintering. 49: 81-89. DOI: 10.2298/SOS1701081J |
0.01 |
|
| 2017 |
Guo W, Zeng L, Wu L, Wang H, Sun S, Lin H, Wu S, Wang C. Effect of CeO2
and Al2
O3
contents on Ce-ZrO2
/Al2
O3
composites Journal of the American Ceramic Society. 101: 2066-2073. DOI: 10.1111/JACE.15379 |
0.01 |
|
| 2017 |
Liu C, Guo W, Sun S, Zou J, Wu S, Lin H. Texture, microstructures, and mechanical properties of AlN-based ceramics with Si3
N4
-Y2
O3
additives Journal of the American Ceramic Society. 100: 3380-3384. DOI: 10.1111/JACE.15029 |
0.01 |
|
| 2017 |
Guo W, Zeng L, Su G, Li H, Lin H, Wu S. Synthesis of TaB2
powders by borothermal reduction Journal of the American Ceramic Society. 100: 2368-2372. DOI: 10.1111/JACE.14824 |
0.01 |
|
| 2017 |
Cheng L, Xie Z, Liu J, Wu H, Jiang Q, Wu S. Effects of Y2O3 on the densification and fracture toughness of SPS-sintered TiC Materials Research Innovations. 22: 7-12. DOI: 10.1080/14328917.2016.1265247 |
0.01 |
|
| 2017 |
Wu L, Guo W, Li J, Wu S, Lin H. Si3N4-ZrB2 ceramics prepared at low temperature with improved mechanical properties Journal of the European Ceramic Society. 37: 4217-4221. DOI: 10.1016/J.JEURCERAMSOC.2017.05.022 |
0.01 |
|
| 2017 |
Gong M, Chen J, Deng X, Wu S. Sliding wear behavior of TiAlN and AlCrN coatings on a unique cemented carbide substrate International Journal of Refractory Metals and Hard Materials. 69: 209-214. DOI: 10.1016/J.IJRMHM.2017.08.003 |
0.01 |
|
| 2017 |
Liu W, Chu Q, Zeng J, He R, Wu H, Wu Z, Wu S. PVD-CrAlN and TiAlN coated Si 3 N 4 ceramic cutting inserts-2. High speed face milling performance and wear mechanism study Ceramics International. 43: 9488-9492. DOI: 10.1016/J.CERAMINT.2017.04.127 |
0.01 |
|
| 2017 |
Liu W, Chu Q, Zeng J, He R, Wu H, Wu Z, Wu S. PVD-CrAlN and TiAlN coated Si 3 N 4 ceramic cutting tools —1. Microstructure, turning performance and wear mechanism Ceramics International. 43: 8999-9004. DOI: 10.1016/J.CERAMINT.2017.04.041 |
0.01 |
|
| 2017 |
He F, Qian G, Ren W, Ke J, Fan P, Shi X, Cheng Y, Wu S, Deng X, Ye J. Preparation and characterization of iron/β-tricalcium phosphate bio-cermets for load-bearing bone substitutes Ceramics International. 43: 8348-8355. DOI: 10.1016/J.CERAMINT.2017.03.173 |
0.01 |
|
| 2017 |
Wu H, Liu W, He R, Wu Z, Jiang Q, Song X, Chen Y, Cheng L, Wu S. Fabrication of dense zirconia-toughened alumina ceramics through a stereolithography-based additive manufacturing Ceramics International. 43: 968-972. DOI: 10.1016/J.CERAMINT.2016.10.027 |
0.01 |
|
| 2017 |
You Y, Tan D, Guo W, Wu S, Lin H, Luo Z. TaB2 powders synthesis by reduction of Ta2O5 with B4C Ceramics International. 43: 897-900. DOI: 10.1016/J.CERAMINT.2016.09.193 |
0.01 |
|
| 2017 |
Wang CC, Zhang FL, Pan JS, Mao JB, Long Y, Huang HP, Wang CY, Lin HT, Deng X, Wu SH. An experimental study on preparation of vitrified bond diamond grinding wheel with hollow spherical corundum granules as pore former The International Journal of Advanced Manufacturing Technology. 93: 595-603. DOI: 10.1007/S00170-017-0475-Y |
0.01 |
|
| 2016 |
Gans D, Hadler MW, Chen X, Wu SH, Dimand R, Abramson JM, Ferrell B, Diamant AL, Kominski GF. Cost Analysis and Policy Implications of a Pediatric Palliative Care Program. Journal of Pain and Symptom Management. PMID 27233140 DOI: 10.1016/J.Jpainsymman.2016.02.020 |
0.01 |
|
| 2016 |
He F, Ren W, Tian X, Liu W, Wu S, Chen X. Comparative study on in vivo response of porous calcium carbonate composite ceramic and biphasic calcium phosphate ceramic. Materials Science & Engineering. C, Materials For Biological Applications. 64: 117-23. PMID 27127035 DOI: 10.1016/j.msec.2016.03.085 |
0.01 |
|
| 2016 |
Meng YY, Diamant A, Jones J, Lin W, Chen X, Wu SH, Pourat N, Roby D, Kominski GF. Racial/Ethnic Disparities in Diabetes Care and Impact of Vendor-Based Disease Management Programs. Diabetes Care. PMID 26965718 DOI: 10.2337/Dc15-1323 |
0.01 |
|
| 2016 |
Chen J, Liu W, Deng X, Wu S. Effects of Mo and Vc on the microstructure and properties of nano-cemented carbides Science of Sintering. 48: 41-50. DOI: 10.2298/SOS1601041C |
0.01 |
|
| 2016 |
Tu G, Wu S, Liu J, Long Y, Wang B. Cutting performance and wear mechanisms of Sialon ceramic cutting tools at high speed dry turning of gray cast iron International Journal of Refractory Metals and Hard Materials. 54: 330-334. DOI: 10.1016/j.ijrmhm.2015.08.007 |
0.01 |
|
| 2016 |
Liu W, Tong W, He R, Wu H, Wu S. Effect of the Y2O3 additive concentration on the properties of a silicon nitride ceramic substrate Ceramics International. 42: 18641-18647. DOI: 10.1016/J.CERAMINT.2016.09.001 |
0.01 |
|
| 2016 |
Liu W, Wu H, Zhou M, He R, Jiang Q, Wu Z, Cheng Y, Song X, Chen Y, Wu S. Fabrication of fine-grained alumina ceramics by a novel process integrating stereolithography and liquid precursor infiltration processing Ceramics International. 42: 17736-17741. DOI: 10.1016/J.CERAMINT.2016.08.099 |
0.01 |
|
| 2016 |
Liu W, Li A, Wu H, He R, Huang J, Long Y, Deng X, Wang Q, Wang C, Wu S. Effects of bias voltage on microstructure, mechanical properties, and wear mechanism of novel quaternary (Ti, Al, Zr)N coating on the surface of silicon nitride ceramic cutting tool Ceramics International. 42: 17693-17697. DOI: 10.1016/J.CERAMINT.2016.08.089 |
0.01 |
|
| 2016 |
Liu W, Li A, Wu H, Long Y, Huang J, Deng X, Wang C, Wang Q, Wu S. Effects of gas pressure on microstructure and performance of (Ti, Al, Zr)N coatings produced by physical vapor deposition Ceramics International. 42: 17436-17441. DOI: 10.1016/J.CERAMINT.2016.08.045 |
0.01 |
|
| 2016 |
Wu H, Cheng Y, Liu W, He R, Zhou M, Wu S, Song X, Chen Y. Effect of the particle size and the debinding process on the density of alumina ceramics fabricated by 3D printing based on stereolithography Ceramics International. DOI: 10.1016/j.ceramint.2016.08.024 |
0.01 |
|
| 2016 |
Zhou M, Liu W, Wu H, Song X, Chen Y, Cheng L, He F, Chen S, Wu S. Preparation of a defect-free alumina cutting tool via additive manufacturing based on stereolithography – Optimization of the drying and debinding processes Ceramics International. 42: 11598-11602. DOI: 10.1016/J.CERAMINT.2016.04.050 |
0.01 |
|
| 2016 |
Guo WM, Zhang ZL, Li JX, You Y, Wu SH, Lin HT. Improvement of densification and mechanical properties of Al2O3-B4C ceramics Ceramics International. 42: 11486-11489. DOI: 10.1016/j.ceramint.2016.04.025 |
0.01 |
|
| 2016 |
Chen J, Liu W, Deng X, Wu S. Tool life and wear mechanism of WC-5TiC-0.5VC-8Co cemented carbides inserts when machining HT250 gray cast iron Ceramics International. 42: 10037-10044. DOI: 10.1016/j.ceramint.2016.03.107 |
0.01 |
|
| 2015 |
Jiao HH, Cui BJ, Wu SH, Bai ZH, Huang ZB. [Influence of Mirabilis jalapa Linn. Growth on the Microbial Community and Petroleum Hydrocarbon Degradation in Petroleum Contaminated Saline-alkali Soil]. Huan Jing Ke Xue= Huanjing Kexue / [Bian Ji, Zhongguo Ke Xue Yuan Huan Jing Ke Xue Wei Yuan Hui "Huan Jing Ke Xue" Bian Ji Wei Yuan Hui.]. 36: 3471-8. PMID 26717712 |
0.01 |
|
| 2015 |
Kong X, Cui BJ, Jin DC, Wu SH, Yang B, Deng Y, Zhuang GQ, Zhuang XL. [Analysis of Microbial Community in the Membrane Bio-Reactor (MBR) Rural Sewage Treatment System]. Huan Jing Ke Xue= Huanjing Kexue / [Bian Ji, Zhongguo Ke Xue Yuan Huan Jing Ke Xue Wei Yuan Hui "Huan Jing Ke Xue" Bian Ji Wei Yuan Hui.]. 36: 3329-38. PMID 26717695 |
0.01 |
|
| 2015 |
He F, Zhang J, Tian X, Wu S, Chen X. A facile magnesium-containing calcium carbonate biomaterial as potential bone graft. Colloids and Surfaces. B, Biointerfaces. 136: 845-852. PMID 26539810 DOI: 10.1016/j.colsurfb.2015.10.027 |
0.01 |
|
| 2015 |
Jiao H, Rui X, Wu S, Bai Z, Zhuang X, Huang Z. Polycyclic aromatic hydrocarbons in the dagang oilfield (china): distribution, sources, and risk assessment. International Journal of Environmental Research and Public Health. 12: 5775-91. PMID 26016436 DOI: 10.3390/ijerph120605775 |
0.01 |
|
| 2015 |
Guo WM, Gu SX, You Y, Jiang QG, Wu SH, Lin HT. Densification and Thermal Stability of Hot-Pressed Si3N4-ZrB2 Ceramics Journal of the American Ceramic Society. 98: 3651-3654. DOI: 10.1111/jace.13933 |
0.01 |
|
| 2015 |
Jiang QG, Liu J, Guo WM, Liu W, Cheng LX, Gong MF, Wu SH. A Novel Hot Pressing Flowing Sintering for Preparation of Texturing Ceramics Journal of the American Ceramic Society. 98: 2696-2699. DOI: 10.1111/jace.13715 |
0.01 |
|
| 2015 |
Song X, Chen Y, Lee TW, Wu S, Cheng L. Ceramic fabrication using Mask-Image-Projection-based Stereolithography integrated with tape-casting Journal of Manufacturing Processes. DOI: 10.1016/j.jmapro.2015.06.022 |
0.01 |
|
| 2015 |
Guo WM, Wu LX, Ma T, Gu SX, You Y, Lin HT, Wu SH, Zhang GJ. Chemical reactivity of hot-pressed Si3N4-ZrB2 ceramics at 1500-1700°C Journal of the European Ceramic Society. 35: 2973-2979. DOI: 10.1016/j.jeurceramsoc.2015.04.031 |
0.01 |
|
| 2015 |
Guo W, You Y, Zhang G, Wu S, Lin H. Improvement of fracture toughness of ZrB2–SiC composites with carbon interfaces Journal of the European Ceramic Society. 35: 1985-1989. DOI: 10.1016/J.JEURCERAMSOC.2014.12.026 |
0.01 |
|
| 2015 |
Guo WM, Yu JJ, Xiong M, Wu SH, Lin HT. High-toughness Lu2O3-doped Si3N4 ceramics by seeding Ceramics International. DOI: 10.1016/j.ceramint.2015.12.137 |
0.01 |
|
| 2015 |
Zhang FL, Liu P, Nie LP, Zhou YM, Huang HP, Wu SH, Lin HT. A comparison on core drilling of silicon carbide and alumina engineering ceramics with mono-layer brazed diamond tool using surfactant as coolant Ceramics International. 41: 8861-8867. DOI: 10.1016/j.ceramint.2015.03.117 |
0.01 |
|
| 2015 |
Chen J, Deng X, Gong M, Liu W, Wu S. Research into preparation and properties of graded cemented carbides with face center cubic-rich surface layer Applied Surface Science. DOI: 10.1016/j.apsusc.2016.02.040 |
0.01 |
|
| 2014 |
Guo W, Xiong M, You Y, Wu S, Lin H. Preparation of rod-like β-Si3N4 seeds with tailored morphology Materials Letters. 132: 365-368. DOI: 10.1016/J.MATLET.2014.06.136 |
0.01 |
|
| 2014 |
Qin J, Long Y, Zeng J, Wu S. Continuous and varied depth-of-cut turning of gray cast iron by using uncoated and TiN/Al2O3 coated silicon nitride-based ceramic tools Ceramics International. 40: 12245-12251. DOI: 10.1016/J.CERAMINT.2014.04.068 |
0.01 |
|
| 2014 |
Long Y, Zeng J, Yu D, Wu S. Microstructure of TiAlN and CrAlN coatings and cutting performance of coated silicon nitride inserts in cast iron turning Ceramics International. 40: 9889-9894. DOI: 10.1016/J.CERAMINT.2014.02.083 |
0.01 |
|
| 2013 |
Zhang Y, Wu SH, Fendrick AM, Baicker K. Variation in medication adherence in heart failure. Jama Internal Medicine. 173: 468-70. PMID 23400219 DOI: 10.1001/jamainternmed.2013.2509 |
0.01 |
|
| 2011 |
Peng HC, Su HS, Lu HH, Li CY, Peng PC, Wu SH, Chang CH. Hybrid CATV/16-QAM OFDM in-building networks over SMF and GI-POF transport. Optics Express. 19: 9575-81. PMID 21643215 DOI: 10.1364/OE.19.009575 |
0.01 |
|
| Hide low-probability matches. |