Year |
Citation |
Score |
2016 |
Dryer B, Fukuda G, Webb J, Montemayor K, Bigio DI, Andersen P, Wetzel M. Comparison of scale-up methods for dispersive mixing in twin-screw extruders Polymer Engineering and Science. DOI: 10.1002/Pen.24439 |
0.362 |
|
2008 |
Kota AK, Kerzner R, Bigio D, Bruck H, Powell D. Characterization of processing effects in hips-cnf composites using thermogravimetric analysis Technical Papers, Regional Technical Conference - Society of Plastics Engineers. 4: 2027-2031. DOI: 10.1002/Pen.21059 |
0.338 |
|
2008 |
Kota AK, Murphy L, Strohmer T, Bigio DI, Bruck HA, Powell D. Combinatorial development of polymer nanocomposites using transient processing conditions in twin screw extrusion Aiche Journal. 54: 1895-1900. DOI: 10.1002/Aic.11505 |
0.488 |
|
2006 |
Elkouss P, Bigio DI, Wetzel MD, Raghavan SR. Influence of polymer viscoelasticity on the residence distributions of extruders Aiche Journal. 52: 1451-1459. DOI: 10.1002/Aic.10754 |
0.589 |
|
2004 |
Mudalamane R, Bigio DI. Experimental characterization of fill length behavior in extruders Polymer Engineering and Science. 44: 557-563. DOI: 10.1002/Pen.20050 |
0.711 |
|
2003 |
Mudalamane R, Bigio DI, Tomayko DC, Meissel M. Behavior of fully filled regions in a non‐intermeshing twin‐screw extruder Polymer Engineering and Science. 43: 1466-1476. DOI: 10.1002/Pen.10124 |
0.699 |
|
2003 |
Mudalamane R, Bigio DI. Process variations and the transient behavior of extruders Aiche Journal. 49: 3150-3160. DOI: 10.1002/Aic.690491215 |
0.669 |
|
2000 |
Gao J, Walsh GC, Bigio D, Briber RM, Wetzel MD. Mean residence time analysis for twin screw extruders Polymer Engineering & Science. 40: 227-237. DOI: 10.1002/Pen.11155 |
0.412 |
|
1999 |
Swann DM, Bigio DI, Magnus FL, Kiehl C. Mixing characterization based on drag flow : Phase III: Effect of kneading blocks on a visco-elastic system Journal of Reinforced Plastics and Composites. 18: 549-558. DOI: 10.1177/073168449901800607 |
0.458 |
|
1999 |
Gasner GE, Bigio D, Marks C, Magnus F, Kiehl C. A new approach to analyzing residence time and mixing in a co‐rotating twin screw extruder Polymer Engineering and Science. 39: 286-298. DOI: 10.1002/Pen.11415 |
0.474 |
|
1999 |
Gao J, Walsh GC, Bigio D, Briber RM, Wetzel MD. Residence-time distribution model for twin-screw extruders Aiche Journal. 45: 2541-2549. DOI: 10.1002/Aic.690451210 |
0.482 |
|
1998 |
Bigio DI, Marks CR, Calabrese RV. Predicting drop breakup in complex flows from model flow experiments International Polymer Processing. 13: 192-198. DOI: 10.3139/217.980192 |
0.429 |
|
1998 |
Xie Y, Tomayko D, Bigio DI, Batch G. On the effect of operating parameters and screw configuration on residence time distribution Journal of Reinforced Plastics and Composites. 17: 1338-1349. DOI: 10.1177/073168449801701502 |
0.422 |
|
1998 |
Cheng J, Xie Y, Bigio DI, Briber RM. Slip Flow in Partially Filled Screw Channel Journal of Reinforced Plastics and Composites. 17: 712-724. DOI: 10.1177/073168449801700803 |
0.457 |
|
1998 |
Yang C, Smith TG, Bigio DI, Anolick C. A Model for Foam Devolatilization in an Extruder Industrial & Engineering Chemistry Research. 37: 1464-1472. DOI: 10.1021/Ie9602623 |
0.404 |
|
1998 |
Cheng J, Bigio DI, Briber RM. Shear effect on the devolatilization of filled polymers Journal of Vinyl and Additive Technology. 4: 45-49. DOI: 10.1002/Vnl.10009 |
0.437 |
|
1997 |
Yang C, Smith TG, Bigio DI, Anolick C. Polymer trace devolatilization: II. Case study and experimental verification Aiche Journal. 43: 1874-1883. DOI: 10.1002/Aic.690430722 |
0.433 |
|
1997 |
Yang C, Smith TG, Bigio DI, Anolick C. Polymer trace devolatilization: I. Foaming experiments and model development Aiche Journal. 43: 1861-1873. DOI: 10.1002/Aic.690430721 |
0.433 |
|
1996 |
Bigio D, Wang K. Scale‐up rules for mixing in a non‐intermeshing twin‐screw extruder Polymer Engineering and Science. 36: 2832-2839. DOI: 10.1002/Pen.10684 |
0.447 |
|
1996 |
Kang J, Smith TG, Bigio DI. Study of breakup mechanisms in cavity flow Aiche Journal. 42: 649-659. DOI: 10.1002/Aic.690420306 |
0.42 |
|
1995 |
Bigio DI, Conner JH. Principal directions as a basis for the evaluation mixing Polymer Engineering and Science. 35: 1527-1534. DOI: 10.1002/Pen.760351906 |
0.378 |
|
1995 |
Yang L, Bigio D, Smith TG. Melt blending of linear low‐density polyethylene and polystyrene in a Haake internal mixer. II. Morphology‐processing relationships Journal of Applied Polymer Science. 58: 129-141. DOI: 10.1002/App.1995.070580114 |
0.368 |
|
1995 |
Yang L, Smith TG, Bigio D. Melt blending of linear low‐density polyethylene and polystyrene in a haake internal mixer. I. Compatibilization and morphology development Journal of Applied Polymer Science. 58: 117-127. DOI: 10.1002/App.1995.070580113 |
0.375 |
|
1993 |
Bigio DI, Young D. The effect of fluid decoupling on viscous mixing Polymer Engineering and Science. 33: 1270-1278. DOI: 10.1002/Pen.760331907 |
0.359 |
|
1993 |
Bigio DI, Ramanthan MR, Herman P. Pressure-related driving forces in the fully filled nonintermeshing twin screw extruder Advances in Polymer Technology. 12: 353-360. DOI: 10.1002/Adv.1993.060120403 |
0.377 |
|
1992 |
Bigio D, Cassidy K, Dellapa M, Baim W. Starve-fed Flow in Co-Rotating Twin Screw Extruders International Polymer Processing. 7: 111-115. DOI: 10.3139/217.920111 |
0.356 |
|
1992 |
Bigio D, Erwin L. The effect of axial pressure gradient on extruder mixing characteristics Polymer Engineering and Science. 32: 760-765. DOI: 10.1002/Pen.760321108 |
0.441 |
|
1991 |
Bigio D, Zerafati S. Parametric study of a 2-D model of the nip region in a counter-rotating, non-intermeshing twin screw extruder Polymer Engineering and Science. 31: 1400-1410. DOI: 10.1002/Pen.760311906 |
0.443 |
|
1991 |
Bigio D, Baim W. Distributive mixing in the nonintermeshing twin‐screw extruder with a newtonian fluid Advances in Polymer Technology. 11: 11-17. DOI: 10.1002/Adv.1991.060110103 |
0.397 |
|
1990 |
Bigio D, Stry W. Measures of mixing in laminar flow Polymer Engineering and Science. 30: 153-161. DOI: 10.1002/Pen.760300305 |
0.453 |
|
1985 |
Bigio DI, Boyd JD, Erwin L, Gailus DW. Mixing studies in the single screw extruder Polymer Engineering and Science. 25: 305-310. DOI: 10.1002/Pen.760250510 |
0.387 |
|
Show low-probability matches. |