| Year |
Citation |
Score |
| 2020 |
Ma M, Wang B, Liu H, Yi D, Shen F, Zhai T. Investigation of fatigue crack propagation behavior of 5083 aluminum alloy under various stress ratios: Role of grain boundary and Schmid factor Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 773: 138871. DOI: 10.1016/J.Msea.2019.138871 |
0.49 |
|
| 2019 |
Cai P, Wen W, Zhai T. A novel microstructure-based model validated experimentally for simulating short fatigue crack growth in 3 dimensions in planar slip alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 743: 453-463. DOI: 10.1016/J.Msea.2018.11.096 |
0.565 |
|
| 2018 |
Sun R, Li L, Guo W, Peng P, Zhai T, Che Z, Li B, Guo C, Zhu Y. Laser shock peening induced fatigue crack retardation in Ti-17 titanium alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 737: 94-104. DOI: 10.1016/J.Msea.2018.09.016 |
0.437 |
|
| 2018 |
Jin S, Ngai T, Zhang G, Zhai T, Jia S, Li L. Precipitation strengthening mechanisms during natural ageing and subsequent artificial aging in an Al-Mg-Si-Cu alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 724: 53-59. DOI: 10.1016/J.Msea.2018.03.006 |
0.327 |
|
| 2017 |
Yang C, Zhang B, Zhao D, Li X, Zhai T, Han Q, Liu F. In-situ synthesis of AlN/Mg-Al composites with high strength and high plasticity Journal of Alloys and Compounds. 699: 627-632. DOI: 10.1016/J.Jallcom.2017.01.005 |
0.385 |
|
| 2017 |
Lv Z, Cai P, Yu T, Jin Y, Zhang H, Fu W, Zhai T. Fatigue behaviors and damage mechanism of a Cr-Mn-N austenitic steel Journal of Alloys and Compounds. 691: 103-109. DOI: 10.1016/J.Jallcom.2016.08.228 |
0.493 |
|
| 2017 |
Yang L, Cai P, Xu Z, Jin Y, Liang C, Yin F, Zhai T. A 3-D model for quantification of fatigue weak-link density and strength distribution in an A713 cast aluminum alloy International Journal of Fatigue. 96: 185-195. DOI: 10.1016/J.Ijfatigue.2016.11.035 |
0.514 |
|
| 2017 |
Xu Y, Nagaumi H, Han Y, Zhang G, Zhai T. The Deformation Behavior and Microstructure Evolution of a Mn- and Cr-Containing Al-Mg-Si-Cu Alloy During Hot Compression and Subsequent Heat Treatment Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 48: 1355-1365. DOI: 10.1007/S11661-016-3881-0 |
0.475 |
|
| 2016 |
Kontsos A, Zhai T, Spear A, Muhlstein C. Guest Editorial: Special Issue TMS - Fatigue Fatigue and Fracture of Engineering Materials and Structures. 39: 651. DOI: 10.1111/Ffe.12438 |
0.334 |
|
| 2016 |
Jin Y, Cai P, Tian QB, Liang CY, Ke DJ, Wang G, Zhai T. An experimental methodology for quantitative characterization of multi-site fatigue crack nucleation in high-strength Al alloys Fatigue and Fracture of Engineering Materials and Structures. DOI: 10.1111/Ffe.12411 |
0.51 |
|
| 2016 |
Cui C, Xue T, Jin Y, Zhai T. Tensile and fatigue behaviour of Ni–Ni3Si eutectic in situ composites Materials Science and Technology. 32: 1053-1058. DOI: 10.1080/02670836.2015.1110883 |
0.445 |
|
| 2016 |
Niu YC, Liu HT, Liu XJ, Jiang YS, Ren XK, Cai P, Zhai TG. Study on nano-pores enlargement during Ag-assisted electroless etching of diamond wire sawn polycrystalline silicon wafers Materials Science in Semiconductor Processing. 56: 119-126. DOI: 10.1016/J.Mssp.2016.08.004 |
0.317 |
|
| 2016 |
Yang C, Zhang B, Zhao D, Lü H, Zhai T, Liu F. Microstructure and mechanical properties of AlN particles in situ reinforced Mg matrix composites Materials Science and Engineering A. 674: 158-163. DOI: 10.1016/J.Msea.2016.07.056 |
0.333 |
|
| 2016 |
Wen W, Cai P, Ngan AHW, Zhai T. An experimental methodology to quantify the resistance of grain boundaries to fatigue crack growth in an AA2024 T351 Al-Cu Alloy Materials Science and Engineering A. 666: 288-296. DOI: 10.1016/J.Msea.2016.04.071 |
0.578 |
|
| 2016 |
Yang W, Zhu ZJ, Wang JJ, Wu YC, Zhai T, Song GL. Slow positron beam study of corrosion behavior of AM60B magnesium alloy in NaCl solution Corrosion Science. 106: 271-280. DOI: 10.1016/J.Corsci.2016.02.012 |
0.39 |
|
| 2016 |
Wen X, Wen W, Zhang Y, Xu B, Zeng Q, Liu Y, Tong L, Zhai T, Li Z. The Effect of Fe Content on Recrystallization Texture Evolution, Microstructures, and Earing of Cold Rolled Continuous Cast AA5052 Alloy Sheets Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-16. DOI: 10.1007/S11661-016-3357-2 |
0.564 |
|
| 2015 |
Shi Y, Wang J, Wang C, Zhai TT, Bao WJ, Xu JJ, Xia XH, Chen HY. Hot Electron of Au Nanorods Activates the Electrocatalysis of Hydrogen Evolution on MoS2 Nanosheets. Journal of the American Chemical Society. 137: 7365-70. PMID 26020144 DOI: 10.1021/Jacs.5B01732 |
0.487 |
|
| 2015 |
Jin Y, Cai P, Wen W, Nagaumi H, Xu B, Zhang Y, Zhai T. The anisotropy of fatigue crack nucleation in an AA7075 T651 Al alloy plate Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 622: 7-15. DOI: 10.1016/J.Msea.2014.11.007 |
0.589 |
|
| 2014 |
Liu Y, Yang W, Qin Q, Wu Y, Wen W, Zhai T, Yu B, Li D, Luo A, Song G. Microstructure and corrosion behavior of die-cast AM60B magnesium alloys in a complex salt solution: A slow positron beam study Corrosion Science. 81: 65-74. DOI: 10.1016/J.Corsci.2013.12.007 |
0.57 |
|
| 2013 |
Li H, Wang X, Xu J, Zhang Q, Bando Y, Golberg D, Ma Y, Zhai T. One-dimensional CdS nanostructures: a promising candidate for optoelectronics. Advanced Materials (Deerfield Beach, Fla.). 25: 3017-37. PMID 23629853 DOI: 10.1002/adma.201300244 |
0.494 |
|
| 2013 |
Wen W, Ngan AHW, Zhang Y, Xu B, Zhai T. A study of the effects of particle 3-dimensional geometry and micro-texture on fatigue crack initiation behaviors in an Al–Cu alloy using focused ion beam and electron backscatter diffraction Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 564: 97-101. DOI: 10.1016/J.Msea.2012.11.098 |
0.548 |
|
| 2012 |
Wen W, Luo AA, Zhai T, Jin Y, Cheng Y, Hoffmann I. Improved bending fatigue and corrosion properties of a Mg–Al–Mn alloy by super vacuum die casting Scripta Materialia. 67: 879-882. DOI: 10.1016/J.Scriptamat.2012.08.010 |
0.576 |
|
| 2012 |
Wen W, Zhai T. Quantification of resistance of grain boundaries to short-fatigue crack growth in three dimensions in high-strength al alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 2743-2752. DOI: 10.1007/S11661-012-1099-3 |
0.457 |
|
| 2012 |
Zhai T, Liaw P. Foreword: Fatigue and Corrosion Damage in Metallic Materials Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 2742-2742. DOI: 10.1007/S11661-012-1083-Y |
0.351 |
|
| 2012 |
Xu Z, Wen W, Zhai T. Effects of Pore Position in Depth on Stress/Strain Concentration and Fatigue Crack Initiation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 2763-2770. DOI: 10.1007/S11661-011-0947-X |
0.34 |
|
| 2012 |
Wu YC, Zhai T, Coleman PG. A Positron annihilation study of corrosion of aluminum and aluminum alloy by NaOH Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 43: 2823-2831. DOI: 10.1007/S11661-011-0806-9 |
0.442 |
|
| 2011 |
Wen W, Zhai T. Three-dimensional effects of microstructures on short fatigue crack growth in an Al-Li 8090 alloy Philosophical Magazine. 91: 3557-3577. DOI: 10.1080/14786435.2011.587467 |
0.484 |
|
| 2011 |
Zheng ZQ, Cai B, Zhai T, Li SC. The behavior of fatigue crack initiation and propagation in AA2524-T34 alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 2017-2022. DOI: 10.1016/J.Msea.2010.10.085 |
0.487 |
|
| 2010 |
Zeng Q, Wen XY, Zhai T. A study of recrystallisation textures in hot band of a continuous cast Al–Mn–Mg alloy Materials Science and Technology. 26: 914-919. DOI: 10.1179/174328409X411970 |
0.455 |
|
| 2010 |
Zhang Y, Xu J, Zhai T. Distributions of pore size and fatigue weak link strength in an A713 sand cast aluminum alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 3639-3644. DOI: 10.1016/J.Msea.2010.03.104 |
0.654 |
|
| 2009 |
Zhai T, Jiang X, Jianhui X, Qiang Z, Wei W. Misorientation Gradients by EBSD in Hot and Cold Deformed Alloys Microscopy and Microanalysis. 15: 400-401. DOI: 10.1017/S1431927609096251 |
0.458 |
|
| 2009 |
Zeng Q, Zhai T. Study on the formation of P orientation in CC Al-Mn-Mg alloy by EBSD method Microscopy and Microanalysis. 15: 404-405. DOI: 10.1017/S1431927609095038 |
0.385 |
|
| 2009 |
Kenik EA, Zeng Q, Zhai T. Characterization of Continuous Cast AA2037 Al Alloy Microscopy and Microanalysis. 15: 1072-1073. DOI: 10.1017/S143192760909343X |
0.436 |
|
| 2009 |
Zeng Q, Ma SW, Zheng YR, Liu SZ, Zhai T. A study of Re and Al diffusion in Ni Journal of Alloys and Compounds. 480: 987-990. DOI: 10.1016/J.Jallcom.2009.02.115 |
0.345 |
|
| 2009 |
Zeng Q, Wen X, Zhai T. Effect of Precipitates on the Development of P Orientation {011}$$ \left\langle {566} \right\rangle $$ in a Recrystallized Continuous Cast AA 3004 Aluminum Alloy after Cold Rolling Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 40: 2488-2497. DOI: 10.1007/S11661-009-9942-X |
0.424 |
|
| 2008 |
Xu J, Kenik EA, Zhai T. Brittle fracture in 50Mo–50Re alloys during slow strain rate tensile testing Philosophical Magazine. 88: 1543-1553. DOI: 10.1080/14786430802216366 |
0.496 |
|
| 2008 |
Xu J, Leonhardt T, Farrell J, Effgen M, Zhai T. Anomalous strain-rate effect on plasticity of a Mo–Re alloy at room temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 479: 76-82. DOI: 10.1016/J.Msea.2007.08.031 |
0.641 |
|
| 2008 |
Zeng Q, Wen X, Zhai T. Texture evolution rate in continuous cast AA5052 aluminum alloy during single pass hot rolling Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 476: 290-300. DOI: 10.1016/J.Msea.2007.05.010 |
0.42 |
|
| 2008 |
Xu J, Zhai T. The small-scale resistance spot welding of refractory alloy 50Mo-50Re thin sheet Jom. 60: 80-83. DOI: 10.1007/S11837-008-0096-X |
0.602 |
|
| 2008 |
Xu J, Zhai T. The Positive Strain-Rate Dependence of Ductility in a 50Mo-50Re Alloy Jom. 60: 76-79. DOI: 10.1007/S11837-008-0095-Y |
0.647 |
|
| 2007 |
Li JX, Wen XY, Man C-, Zhai T. Fatigue of continuous cast AA5754 Al alloy sheet Materials Science and Technology. 23: 324-332. DOI: 10.1179/174328407X158677 |
0.476 |
|
| 2007 |
Li J, Zeng Q, Wen XY, Zhai T. Microstructure, texture and mechanical properties of continuous cast AA 5083 aluminium alloy Materials Science and Technology. 23: 225-228. DOI: 10.1179/174328407X154239 |
0.439 |
|
| 2007 |
Jiang XP, Man CS, Shepard MJ, Zhai T. Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V Materials Science and Engineering A. 468: 137-143. DOI: 10.1016/J.Msea.2007.01.156 |
0.496 |
|
| 2007 |
Wen XY, Long ZD, Yin WM, Zhai T, Li Z, Das SK. Texture evolution in continuous casting aluminum alloy AA5052 hot band during biaxial stretching Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 245-251. DOI: 10.1016/J.Msea.2006.11.052 |
0.396 |
|
| 2007 |
Xu J, Jiang X, Zeng Q, Zhai T, Leonhardt T, Farrell J, Umstead W, Effgen MP. Optimization of resistance spot welding on the assembly of refractory alloy 50Mo-50Re thin sheet Journal of Nuclear Materials. 366: 417-425. DOI: 10.1016/J.Jnucmat.2007.03.030 |
0.612 |
|
| 2006 |
Jiang XP, Wang XY, Li JX, Li DY, Man CS, Shepard MJ, Zhai T. Enhancement of fatigue and corrosion properties of pure Ti by sandblasting Materials Science and Engineering A. 429: 30-35. DOI: 10.1016/J.Msea.2006.04.024 |
0.388 |
|
| 2006 |
Zhai T. Strength distribution of fatigue crack initiation sites in an Al-Li alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 3139-3147. DOI: 10.1007/S11661-006-0194-8 |
0.505 |
|
| 2005 |
Li J, Liu WC, Zhai T, Kenik EA. Comparison of recrystallization texture in cold-rolled continuous cast AA5083 and 5182 aluminum alloys Scripta Materialia. 52: 163-168. DOI: 10.1016/J.Scriptamat.2004.10.003 |
0.452 |
|
| 2005 |
Wen XY, Zhai T, Xiao CH, Ningileri S, Li Z, Lee WB, Das S. A dislocation-model of forming limit diagrams of FCC metal sheet with combination of cube and copper orientations Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 402: 149-157. DOI: 10.1016/J.Msea.2005.04.017 |
0.366 |
|
| 2005 |
Yu XF, Zhao YM, Wen XY, Zhai T. A study of mechanical isotropy of continuous cast and direct chill cast AA5182 Al alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 394: 376-384. DOI: 10.1016/J.Msea.2004.11.060 |
0.357 |
|
| 2005 |
Zhai T, Jiang XP, Li JX, Garratt MD, Bray GH. The grain boundary geometry for optimum resistance to growth of short fatigue cracks in high strength Al-alloys International Journal of Fatigue. 27: 1202-1209. DOI: 10.1016/J.Ijfatigue.2005.06.021 |
0.506 |
|
| 2005 |
Li JX, Zhai T, Garratt MD, Bray GH. Four-point-bend fatigue of AA 2026 aluminum alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 2529-2539. DOI: 10.1007/S11661-005-0126-Z |
0.547 |
|
| 2004 |
Liu WC, Zhai T, Man C-, Radhakrishnan B, Morris JG. Effect of initial texture on texture evolution in cold-rolled AA 5182 aluminium alloy Philosophical Magazine. 84: 3305-3321. DOI: 10.1080/14786430412331283082 |
0.384 |
|
| 2004 |
Liu WC, Zhai T, Morris JG. Texture evolution of continuous cast and direct chill cast AA 3003 aluminum alloys during cold rolling Scripta Materialia. 51: 83-88. DOI: 10.1016/J.Scriptamat.2004.04.006 |
0.44 |
|
| 2003 |
Liu WC, Zhai T, Man C-, Morris JG. Quantification of recrystallization texture evolution in cold rolled AA 5182 aluminum alloy Scripta Materialia. 49: 539-545. DOI: 10.1016/S1359-6462(03)00350-6 |
0.431 |
|
| 2003 |
Liu WC, Zhai T, Morris JG. Comparison of recrystallization and recrystallization textures in cold-rolled DC and CC AA 5182 aluminum alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 358: 84-93. DOI: 10.1016/S0921-5093(03)00264-8 |
0.474 |
|
| 2000 |
Zhai T, Wilkinson AJ, Martin JW. A crystallographic mechanism for fatigue crack propagation through grain boundaries Acta Materialia. 48: 4917-4927. DOI: 10.1016/S1359-6454(00)00214-7 |
0.432 |
|
| 1999 |
Zhai T, Xu YG, Martin JW, Wilkinson AJ, Briggs GAD. A self-aligning four-point bend testing rig and sample geometry effect in four-point bend fatigue International Journal of Fatigue. 21: 889-894. DOI: 10.1016/S0142-1123(99)00084-5 |
0.333 |
|
| 1998 |
Zhai T, Briggs GAD, Martin JW. Acoustic microscopy of room-temperature fatigue damage in aluminium single crystals Philosophical Magazine. 77: 957-980. DOI: 10.1080/01418619808221222 |
0.371 |
|
| 1997 |
Crossen JD, Sykes JM, Zhai T, Briggs GAD. Study of the coating/substrate interface by scanning acoustic microscopy Cathodic disbonding of epoxy-polyamide lacquer from mild steel Faraday Discussions. 107: 417-424. DOI: 10.1039/A704693F |
0.313 |
|
| 1996 |
Zhai T, Martin JW, Briggs GAD, Wilkinson AJ. Fatigue Damage At Room Temperature In Aluminium Single Crystals-Iii. Lattice Rotation Acta Materialia. 44: 3477-3488. DOI: 10.1016/1359-6454(96)00026-2 |
0.385 |
|
| 1996 |
Zhai T, Briggs GAD, Martin JW. Fatigue damage at room temperature in aluminium single crystals—IV. Secondary slip Acta Materialia. 44: 3489-3496. DOI: 10.1016/1359-6454(96)00025-0 |
0.424 |
|
| 1996 |
Zhai T, Martin JW, Briggs GAD. Fatigue damage at room temperature in aluminium single crystals—II. TEM Acta Materialia. 44: 1729-1739. DOI: 10.1016/1359-6454(95)00330-4 |
0.368 |
|
| 1995 |
Zhai T, Martin JW, Briggs GAD. Fatigue damage in aluminum single crystals—I. On the surface containing the slip burgers vector Acta Metallurgica Et Materialia. 43: 3813-3825. DOI: 10.1016/0956-7151(95)90165-5 |
0.4 |
|
| 1994 |
Zhai T, Knauss D, Briggs GAD, Martin JW. Mixed mode crack mouth reflection in time-resolved acoustic microscopy of short fatigue cracks in single crystal aluminium Journal of Physics D. 27: 719-725. DOI: 10.1088/0022-3727/27/4/007 |
0.403 |
|
| 1993 |
Knauss D, Bennink DD, Martin JW, Briggs GAD, Zhai T. Three-dimensional measurement of short fatigue cracks using scanning acoustic microscopy Materials Science and Technology. 9: 1086-1093. DOI: 10.1179/Mst.1993.9.12.1086 |
0.464 |
|
| 1993 |
Zhai T, Bennink DD, Knauss D, Briggs GAD, Martin JW. Depth Measurements of Short Cracks in Perspex with the Scanning Acoustic Microscope Materials Characterization. 31: 115-126. DOI: 10.1016/1044-5803(93)90052-W |
0.403 |
|
| 1993 |
Knauss D, Bennink DD, Zhai T, Briggs GAD, Martin JW. Depth measurement of short cracks with an acoustic microscope Journal of Materials Science. 28: 4910-4917. DOI: 10.1007/Bf00361155 |
0.405 |
|
| Show low-probability matches. |