| Year |
Citation |
Score |
| 2020 |
Guglietta F, Behr M, Biferale L, Falcucci G, Sbragaglia M. On the effects of membrane viscosity on transient red blood cell dynamics. Soft Matter. PMID 32567630 DOI: 10.1039/D0Sm00587H |
0.37 |
|
| 2020 |
Haßler S, Ranno AM, Behr M. Finite-element formulation for advection–reaction equations with change of variable and discontinuity capturing Computer Methods in Applied Mechanics and Engineering. 369: 113171. DOI: 10.1016/J.Cma.2020.113171 |
0.424 |
|
| 2020 |
Spenke T, Hosters N, Behr M. A multi-vector interface quasi-Newton method with linear complexity for partitioned fluid–structure interaction Computer Methods in Applied Mechanics and Engineering. 361: 112810. DOI: 10.1016/J.Cma.2019.112810 |
0.302 |
|
| 2019 |
Haßler S, Pauli L, Behr M. The Variational Multiscale Formulation for the Fully-Implicit Log-Morphology Equation as a Tensor-Based Blood Damage Model. International Journal For Numerical Methods in Biomedical Engineering. e3262. PMID 31493337 DOI: 10.1002/Cnm.3262 |
0.411 |
|
| 2019 |
Karyofylli V, Wendling L, Make M, Hosters N, Behr M. Simplex space-time meshes in thermally coupled two-phase flow simulations of mold filling Computers & Fluids. 192: 104261. DOI: 10.1016/J.Compfluid.2019.104261 |
0.422 |
|
| 2019 |
Helmig J, Behr M, Elgeti S. Boundary-conforming finite element methods for twin-screw extruders: Unsteady - temperature-dependent - non-Newtonian simulations Computers & Fluids. 190: 322-336. DOI: 10.1016/J.Compfluid.2019.06.028 |
0.456 |
|
| 2019 |
Brüderlin M, Hosters N, Behr M. Reduced-order model for robust aeroelastic control Ceas Aeronautical Journal. 10: 367-384. DOI: 10.1007/S13272-018-0322-3 |
0.395 |
|
| 2019 |
Karyofylli V, Kamaldinova L, Simon M, Mokrov O, Reisgen U, Behr M. Axisymmetric two‐phase flow simulations on space‐time meshes Pamm. 19. DOI: 10.1002/Pamm.201900409 |
0.452 |
|
| 2019 |
Danwitz Mv, Karyofylli V, Hosters N, Behr M. Simplex space‐time meshes in compressible flow simulations International Journal For Numerical Methods in Fluids. 91: 29-48. DOI: 10.1002/Fld.4743 |
0.444 |
|
| 2018 |
Hosters N, Helmig J, Stavrev A, Behr M, Elgeti S. Fluid–structure interaction with NURBS-based coupling Computer Methods in Applied Mechanics and Engineering. 332: 520-539. DOI: 10.1016/J.Cma.2018.01.003 |
0.373 |
|
| 2018 |
Karyofylli V, Frings M, Elgeti S, Behr M. Simplex space-time meshes in two-phase flow simulations International Journal For Numerical Methods in Fluids. 86: 218-230. DOI: 10.1002/Fld.4414 |
0.442 |
|
| 2017 |
Pauli LH, Behr M, Haßler ST. Strain-Based Blood Damage Modeling : Current Status and Future Perspectives International Journal of Artificial Organs. 40. DOI: 10.5301/Ijao.5000629 |
0.303 |
|
| 2017 |
Brüderlin M, Hosters N, Behr M. Robust Active Control of a Winglet with Elastic Suspension at Transonic Flow Journal of Guidance Control and Dynamics. 41: 526-534. DOI: 10.2514/1.G002900 |
0.381 |
|
| 2017 |
Keith B, Knechtges P, Roberts N, Elgeti S, Behr M, Demkowicz L. An ultraweak DPG method for viscoelastic fluids Journal of Non-Newtonian Fluid Mechanics. 247: 107-122. DOI: 10.1016/J.Jnnfm.2017.06.006 |
0.432 |
|
| 2017 |
Brüderlin M, Zimmer M, Hosters N, Behr M. Numerical simulation of vortex generators on a winglet control surface Aerospace Science and Technology. 71: 651-660. DOI: 10.1016/J.Ast.2017.10.018 |
0.41 |
|
| 2017 |
Karyofylli V, Behr M, Schmitz M, Hopmann C. Novel discretization methods for improved simulation precision in injection molding Materialwissenschaft Und Werkstofftechnik. 48: 1264-1269. DOI: 10.1002/Mawe.201700156 |
0.307 |
|
| 2017 |
Pauli LH, Behr M. On stabilized space‐time FEM for anisotropic meshes: Incompressible Navier–Stokes equations and applications to blood flow in medical devices International Journal For Numerical Methods in Fluids. 85: 189-209. DOI: 10.1002/Fld.4378 |
0.416 |
|
| 2016 |
Gesenhues L, Pauli L, Behr M. Strain-based blood damage estimation for computational design of ventricular assist devices. The International Journal of Artificial Organs. 0. PMID 27079416 DOI: 10.5301/Ijao.5000484 |
0.381 |
|
| 2016 |
Stavrev A, Nguyen LH, Shen R, Varduhn V, Behr M, Elgeti S, Schillinger D. Geometrically accurate, efficient, and flexible quadrature techniques for the tetrahedral finite cell method Computer Methods in Applied Mechanics and Engineering. 310: 646-673. DOI: 10.1016/J.Cma.2016.07.041 |
0.408 |
|
| 2016 |
Zwicke F, Knechtges P, Behr M, Elgeti S. Automatic implementation of material laws: Jacobian calculation in a finite element code with TAPENADE Computers & Mathematics With Applications. 72: 2808-2822. DOI: 10.1016/J.Camwa.2016.10.010 |
0.357 |
|
| 2015 |
Frauholz S, Reinartz BU, Muller S, Behr M. Transition prediction for scramjets using γ-reθt model coupled to two turbulence models Journal of Guidance, Control, and Dynamics. 38: 1404-1422. DOI: 10.2514/1.B35630 |
0.369 |
|
| 2015 |
Pauli L, Both JW, Behr M. Stabilized finite element method for flows with multiple reference frames International Journal For Numerical Methods in Fluids. 78: 657-669. DOI: 10.1002/Fld.4032 |
0.453 |
|
| 2014 |
Marsden AL, Bazilevs Y, Long CC, Behr M. Recent advances in computational methodology for simulation of mechanical circulatory assist devices. Wiley Interdisciplinary Reviews. Systems Biology and Medicine. 6: 169-88. PMID 24449607 DOI: 10.1002/Wsbm.1260 |
0.397 |
|
| 2014 |
Frauholz S, Bosco A, Reinartz BU, Müller S, Behr M. Investigation of hypersonic intakes using Reynolds stress modeling and wavelet-based adaptation Aiaa Journal. 52: 2765-2781. DOI: 10.2514/1.J052966 |
0.474 |
|
| 2014 |
Knechtges P, Behr M, Elgeti S. Fully-implicit log-conformation formulation of constitutive laws Journal of Non-Newtonian Fluid Mechanics. 214: 78-87. DOI: 10.1016/J.Jnnfm.2014.09.018 |
0.342 |
|
| 2014 |
Püttmann A, Nicolai M, Behr M, Von Lieres E. Stabilized space-time finite elements for high-definition simulation of packed bed chromatography Finite Elements in Analysis and Design. 86: 1-11. DOI: 10.1016/J.Finel.2014.03.001 |
0.425 |
|
| 2014 |
Vitale F, Nam J, Turchetti L, Behr M, Raphael R, Annesini MC, Pasquali M. A multiscale, biophysical model of flow-induced red blood cell damage Aiche Journal. 60: 1509-1516. DOI: 10.1002/Aic.14318 |
0.704 |
|
| 2013 |
Pauli L, Nam J, Pasquali M, Behr M. Transient stress-based and strain-based hemolysis estimation in a simplified blood pump. International Journal For Numerical Methods in Biomedical Engineering. 29: 1148-60. PMID 23922311 DOI: 10.1002/Cnm.2576 |
0.682 |
|
| 2013 |
Siegbert R, Elgeti S, Behr M, Kurth K, Windeck C, Hopmann C. Design criteria in numerical design of profile extrusion dies Key Engineering Materials. 554: 794-800. DOI: 10.4028/Www.Scientific.Net/Kem.554-557.794 |
0.367 |
|
| 2013 |
Nguyen T, Behr M, Reinartz B, Hohn O, Gülhan A. Effects of sidewall compression and relaminarization in a scramjet inlet Journal of Propulsion and Power. 29: 628-638. DOI: 10.2514/1.B34740 |
0.435 |
|
| 2013 |
Pauli L, Behr M, Elgeti S. Towards shape optimization of profile extrusion dies with respect to homogeneous die swell Journal of Non-Newtonian Fluid Mechanics. 200: 79-87. DOI: 10.1016/J.Jnnfm.2012.12.002 |
0.344 |
|
| 2013 |
Schlauch E, Ernst M, Seto R, Briesen H, Sommerfeld M, Behr M. Comparison of three simulation methods for colloidal aggregates in Stokes flow: Finite elements, lattice Boltzmann and Stokesian dynamics Computers and Fluids. 86: 199-209. DOI: 10.1016/J.Compfluid.2013.07.005 |
0.49 |
|
| 2013 |
Hosters N, Klaus M, Behr M, Reimerdes HG. Application of a partitioned field approach to transient aerothermal problems in rocket nozzles Computers and Fluids. 88: 795-803. DOI: 10.1016/J.Compfluid.2013.06.014 |
0.395 |
|
| 2013 |
Püttmann A, Nicolai M, Behr M, von Lieres E. A Finite Element Method for Spatially Resolved Simulation of Packed Bed Chromatography Pamm. 13: 511-512. DOI: 10.1002/Pamm.201310248 |
0.391 |
|
| 2012 |
Nguyen T, Vukovic M, Behr M, Reinartz B. Numerical simulations of successive distortions in supersonic turbulent flow Aiaa Journal. 50: 2365-2375. DOI: 10.2514/1.J051465 |
0.481 |
|
| 2012 |
Elgeti S, Probst M, Windeck C, Behr M, Michaeli W, Hopmann C. Numerical shape optimization as an approach to extrusion die design Finite Elements in Analysis and Design. 61: 35-43. DOI: 10.1016/J.Finel.2012.06.008 |
0.403 |
|
| 2012 |
Elgeti S, Sauerland H, Pauli L, Behr M. On the usage of NURBS as interface representation in free-surface flows International Journal For Numerical Methods in Fluids. 69: 73-87. DOI: 10.1002/Fld.2537 |
0.38 |
|
| 2011 |
Nam J, Behr M, Pasquali M. Space-time least-squares finite element method for convection-reaction system with transformed variables. Computer Methods in Applied Mechanics and Engineering. 200: 2562-2576. PMID 21709752 DOI: 10.1016/J.Cma.2011.04.015 |
0.725 |
|
| 2011 |
Hormes M, Borchardt R, Mager I, Rode TS, Behr M, Steinseifer U. A validated CFD model to predict O₂ and CO₂ transfer within hollow fiber membrane oxygenators. The International Journal of Artificial Organs. 34: 317-25. PMID 21462147 DOI: 10.5301/Ijao.2011.6494 |
0.356 |
|
| 2010 |
Probst M, Lülfesmann M, Nicolai M, Bücker H, Behr M, Bischof C. Sensitivity of optimal shapes of artificial grafts with respect to flow parameters Computer Methods in Applied Mechanics and Engineering. 199: 997-1005. DOI: 10.1016/J.Cma.2009.11.013 |
0.371 |
|
| 2010 |
Papadopoulos D, Herty M, Behr M, Rath V. Reconstruction of Geophysical Layers with Shape Optimization and Level Set Methods Pamm. 10: 587-588. DOI: 10.1002/Pamm.201010286 |
0.314 |
|
| 2009 |
Finocchiaro T, Heinke S, Behbahani M, Lessmann M, Laumen M, Steinseifer U, Schmitz-Rode T, Leonhardt S, Behr M, Hameyer K. Methods of design, simulation, and control for the development of new VAD/TAH concepts. Biomedizinische Technik. Biomedical Engineering. 54: 269-81. PMID 19807290 DOI: 10.1515/Bmt.2009.031 |
0.375 |
|
| 2009 |
Becker V, Schlauch E, Behr M, Briesen H. Restructuring of colloidal aggregates in shear flows and limitations of the free-draining approximation. Journal of Colloid and Interface Science. 339: 362-72. PMID 19726052 DOI: 10.1016/J.Jcis.2009.07.022 |
0.357 |
|
| 2009 |
Behbahani M, Behr M, Hormes M, Steinseifer U, Arora D, Coronado O, Pasquali M. A review of computational fluid dynamics analysis of blood pumps European Journal of Applied Mathematics. 20: 363-397. DOI: 10.1017/S0956792509007839 |
0.629 |
|
| 2009 |
Probst M, Lülfesmann M, Bücker HM, Behr M, Bischof CH. Sensitivity of shear rate in artificial grafts using automatic differentiation International Journal For Numerical Methods in Fluids. 62: 1047-1062. DOI: 10.1002/Fld.2061 |
0.417 |
|
| 2008 |
Hentschel B, Tedjo I, Probst M, Wolter M, Behr M, Bischof C, Kuhlen T. Interactive blood damage analysis for ventricular assist devices. Ieee Transactions On Visualization and Computer Graphics. 14: 1515-22. PMID 18989004 DOI: 10.1109/Tvcg.2008.142 |
0.427 |
|
| 2008 |
Behr M. Simplex space–time meshes in finite element simulations International Journal For Numerical Methods in Fluids. 57: 1421-1434. DOI: 10.1002/Fld.1796 |
0.353 |
|
| 2007 |
Coronado OM, Arora D, Behr M, Pasquali M. A simple method for simulating general viscoelastic fluid flows with an alternate log-conformation formulation Journal of Non-Newtonian Fluid Mechanics. 147: 189-199. DOI: 10.1016/J.Jnnfm.2007.08.005 |
0.615 |
|
| 2006 |
Arora D, Behr M, Pasquali M. Hemolysis estimation in a centrifugal blood pump using a tensor-based measure. Artificial Organs. 30: 539-47. PMID 16836735 DOI: 10.1111/J.1525-1594.2006.00256.X |
0.626 |
|
| 2006 |
Arora D, Behbahani M, Lammel A, Benkowski B, White R, Hussain F, Behr M, Pasquali M. COMPUTATIONAL FLUID DYNAMICS (CFD) ANALYSIS OF MICROMED-DEBAKEY BLOOD PUMP Asaio Journal. 52: 32A. DOI: 10.1097/00002480-200603000-00144 |
0.558 |
|
| 2006 |
Behr M, Arora D, Coronado OM, Pasquali M. Models and finite element techniques for blood flow simulation International Journal of Computational Fluid Dynamics. 20: 175-181. DOI: 10.1080/10618560600789776 |
0.669 |
|
| 2006 |
Coronado OM, Arora D, Behr M, Pasquali M. Four-field Galerkin/least-squares formulation for viscoelastic fluids Journal of Non-Newtonian Fluid Mechanics. 140: 132-144. DOI: 10.1016/J.Jnnfm.2006.03.016 |
0.619 |
|
| 2005 |
Abraham F, Behr M, Heinkenschloss M. Shape optimization in unsteady blood flow: a numerical study of non-Newtonian effects. Computer Methods in Biomechanics and Biomedical Engineering. 8: 201-12. PMID 16214714 DOI: 10.1080/10255840512331388957 |
0.374 |
|
| 2005 |
Abraham F, Behr M, Heinkenschloss M. Shape optimization in steady blood flow: a numerical study of non-Newtonian effects. Computer Methods in Biomechanics and Biomedical Engineering. 8: 127-37. PMID 16154876 DOI: 10.1080/10255840500180799 |
0.441 |
|
| 2005 |
Arora D, Hussain F, Behr M, Pasquali M, Yuri K, Motomura T, Nose??? Y. PREDICTION AND MEASUREMENT OF MECHANICAL HEMOLYSIS IN AN IMPLANTABLE CENTRIFUGAL BLOOD PUMP Asaio Journal. 51: 5A. DOI: 10.1097/00002480-200503000-00019 |
0.492 |
|
| 2004 |
Arora D, Behr M, Pasquali M. A tensor-based measure for estimating blood damage. Artificial Organs. 28: 1002-15. PMID 15504116 DOI: 10.1111/J.1525-1594.2004.00072.X |
0.621 |
|
| 2004 |
Yuri K, Iwahashi H, Motomura T, Hata A, Asai T, Nose Y, Arora D, Behr M, Pasquali M. DIFFERENT LEVELS OF HEMOLYSIS OCCURRED BY A CENTRIFUGAL BLOOD PUMP IN VARIOUS CLINICAL CONDITIONS Asaio Journal. 50: 121. DOI: 10.1097/00002480-200403000-00044 |
0.502 |
|
| 2004 |
Abraham F, Behr M, Heinkenschloss M. The effect of stabilization in finite element methods for the optimal boundary control of the Oseen equations Finite Elements in Analysis and Design. 41: 229-251. DOI: 10.1016/J.Finel.2004.06.001 |
0.367 |
|
| 2004 |
Behr M, Arora D, Nosé Y, Motomura T. Performance analysis of ventricular assist devices using finite element flow simulation International Journal For Numerical Methods in Fluids. 46: 1201-1210. DOI: 10.1002/Fld.796 |
0.504 |
|
| 2004 |
Behr M. On the application of slip boundary condition on curved boundaries International Journal For Numerical Methods in Fluids. 45: 43-51. DOI: 10.1002/Fld.663 |
0.334 |
|
| 2003 |
Behr M, Arora D. Shear-slip Mesh Update Method: implementation and applications. Computer Methods in Biomechanics and Biomedical Engineering. 6: 113-23. PMID 12745425 DOI: 10.1080/1025584031000091650 |
0.519 |
|
| 2002 |
Behr M, Abraham F. Free-surface flow simulations in the presence of inclined walls Computer Methods in Applied Mechanics and Engineering. 191: 5467-5483. DOI: 10.1016/S0045-7825(02)00444-9 |
0.456 |
|
| 2001 |
Behr M, Tezduyar TE. Shear-Slip Mesh Update in 3D Computation of Complex Flow Problems with Rotating Mechanical Components Computer Methods in Applied Mechanics and Engineering. 190: 3189-3200. DOI: 10.1016/S0045-7825(00)00388-1 |
0.492 |
|
| 2001 |
Behr M. Stabilized space‐time finite element formulations for free‐surface flows Communications in Numerical Methods in Engineering. 17: 813-819. DOI: 10.1002/Cnm.451 |
0.467 |
|
| 2000 |
Behr M, Pressel DM, Sturek WB. Comments on CFD code performance on scalable architectures Computer Methods in Applied Mechanics and Engineering. 190: 263-277. DOI: 10.1016/S0045-7825(00)00201-2 |
0.321 |
|
| 1999 |
Behr M, Tezduyar T. The Shear-Slip Mesh Update Method Computer Methods in Applied Mechanics and Engineering. 174: 261-274. DOI: 10.1016/S0045-7825(98)00299-0 |
0.443 |
|
| 1999 |
Kashiyama K, Ohba Y, Takagi T, Behr M, Tezduyar TE. Parallel finite element method utilizing the mode splitting and sigma coordinate for shallow water flows Computational Mechanics. 23: 144-150. DOI: 10.1007/S004660050394 |
0.464 |
|
| 1999 |
Güler I, Behr M, Tezduyar TE. Parallel finite element computation of free-surface flows Computational Mechanics. 23: 117-123. DOI: 10.1007/S004660050391 |
0.433 |
|
| 1998 |
Tezduyar T, Aliabadi S, Behr M. Enhanced-Discretization Interface-Capturing Technique (EDICT) for computation of unsteady flows with interfaces Computer Methods in Applied Mechanics and Engineering. 155: 235-248. DOI: 10.1016/S0045-7825(97)00194-1 |
0.461 |
|
| 1996 |
Tezduyar T, Aliabadi S, Behr M, Johnson A, Kalro V, Litke M. Flow simulation and high performance computing Computational Mechanics. 18: 397-412. DOI: 10.1007/Bf00350249 |
0.475 |
|
| 1995 |
Behr M, Hastreiter D, Mittal S, Tezduyar TE. Incompressible flow past a circular cylinder: dependence of the computed flow field on the location of the lateral boundaries Computer Methods in Applied Mechanics and Engineering. 123: 309-316. DOI: 10.1016/0045-7825(94)00736-7 |
0.485 |
|
| 1995 |
Kashiyama K, Ito H, Behr M, Tezduyar TE. Three-Step Explicit Finite Element Computation Of Shallow Water Flows On A Massively Parallel Computer International Journal For Numerical Methods in Fluids. 21: 885-900. DOI: 10.1002/Fld.1650211009 |
0.44 |
|
| 1994 |
Behr M, Tezduyar TE. Finite element solution strategies for large-scale flow simulations☆ Computer Methods in Applied Mechanics and Engineering. 112: 3-24. DOI: 10.1016/0045-7825(94)90016-7 |
0.496 |
|
| 1994 |
Tezduyar TE, Aliabadi SK, Behr M, Mittal S. Massively parallel finite element simulation of compressible and incompressible flows Computer Methods in Applied Mechanics and Engineering. 119: 157-177. DOI: 10.1016/0045-7825(94)00082-4 |
0.486 |
|
| 1994 |
Kennedy JG, Behr M, Kalro V, Tezduyar TE. Implementation of implicit finite element methods for incompressible flows on the CM-5 Computer Methods in Applied Mechanics and Engineering. 119: 95-111. DOI: 10.1016/0045-7825(94)00078-6 |
0.31 |
|
| 1993 |
Tezduyar T, Aliabadi S, Behr M, Johnson A, Mittal S. Parallel Finite-Element Computation of 3D Flows Computer. 26: 27-36. DOI: 10.1109/2.237441 |
0.473 |
|
| 1993 |
Behr M, Johnson A, Kennedy J, Mittal S, Tezduyar TE. Computation of incompressible flows with implicit finite element implementations on the Connection Machine Computer Methods in Applied Mechanics and Engineering. 108: 99-118. DOI: 10.1016/0045-7825(93)90155-Q |
0.484 |
|
| 1992 |
Tezduyar TE, Behr M, Aliabadi SK, Mittal S, Ray SE. A new mixed preconditioning method for finite element computations Computer Methods in Applied Mechanics and Engineering. 99: 27-42. DOI: 10.1016/0045-7825(92)90121-Y |
0.348 |
|
| 1992 |
Tezduyar TE, Behr M, Mittal S, Liou J. A new strategy for finite element computations involving moving boundaries and interfaces—the deforming-spatial-domain/space-time procedure. II: Computation of free-surface flows, two-liquid flows, and flows with drifting cylinders Applied Mechanics and Engineering. 94: 353-371. DOI: 10.1016/0045-7825(92)90060-W |
0.485 |
|
| 1992 |
Tezduyar TE, Behr M, Liou J. A new strategy for finite element computations involving moving boundaries and interfaces-The deforming-spatial-domain/space-time procedure: I. The concept and the preliminary numerical tests Computer Methods in Applied Mechanics and Engineering. 94: 339-351. DOI: 10.1016/0045-7825(92)90059-S |
0.35 |
|
| 1991 |
Behr M, Tezduyar TE, Higuchi H. Wake interference behind two flat plates normal to the flow - A finite-element study Theoretical and Computational Fluid Dynamics. 2: 223-250. DOI: 10.1007/Bf00271639 |
0.481 |
|
| 1991 |
Behr M, Liou J, Shih R, Tezduyar TE. Vorticity‐streamfunction formulation of unsteady incompressible flow past a cylinder: Sensitivity of the computed flow field to the location of the outflow boundary International Journal For Numerical Methods in Fluids. 12: 323-342. DOI: 10.1002/Fld.1650120403 |
0.432 |
|
| 1990 |
Tezduyar TE, Liou J, Ganjoo DK, Behr M. Solution techniques for the vorticity–streamfunction formulation of two‐dimensional unsteady incompressible flows International Journal For Numerical Methods in Fluids. 11: 515-539. DOI: 10.1002/Fld.1650110505 |
0.408 |
|
| Show low-probability matches. |