Renlong Xin, Ph.D. - Publications

Affiliations: 
2006 Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong 
Area:
Materials Science Engineering

102 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Ren W, Xin R, Tan C, Liu D. Texture Related Inhomogeneous Deformation and Fracture Localization in Friction-Stir-Welded Magnesium Alloys: A Review Frontiers in Materials. 6. DOI: 10.3389/Fmats.2019.00339  0.535
2020 Wang K, Yan Z, Zhou Y, Wei S, Wang X, Xin R, Liu Q. Slip initiation in interlayered β and corresponding slip transfer during compression of a lamellar-structure titanium alloy Results in Physics. 18: 103276. DOI: 10.1016/J.Rinp.2020.103276  0.371
2020 Zhu Y, Liu F, Song B, Xin R. Coupling pre-aging treatment and side-rolling to improve the mechanical properties of AZ80 alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 779: 139158. DOI: 10.1016/J.Msea.2020.139158  0.476
2020 Zhu Y, Liu F, Xin R, Song B, Liu Q. Improving mechanical properties of an AZ91 alloy by properly combining aging treatment and torsion deformation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 779: 139156. DOI: 10.1016/J.Msea.2020.139156  0.52
2020 Zhou Y, Wang K, Xin R, Liu Q. Effect of special primary α grain on variant selection of secondary α phase in a near-α titanium alloy Materials Letters. 271: 127766. DOI: 10.1016/J.Matlet.2020.127766  0.414
2020 Zhou Y, Wang K, Yan Z, Xin R, Wei S, Wang X, Liu Q. Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy Materials Characterization. 167: 110521. DOI: 10.1016/J.Matchar.2020.110521  0.483
2020 Song B, Du Z, Guo N, Yang Q, Wang F, Guo S, Xin R. Effect of free-end torsion on microstructure and mechanical properties of AZ31 bars with square section Journal of Materials Science & Technology. DOI: 10.1016/J.Jmst.2020.06.050  0.491
2020 Ren W, Liu D, Liu Q, Xin R. Influence of texture distribution in magnesium welds on their non-uniform mechanical behavior: A CPFEM study Journal of Materials Science & Technology. 46: 168-176. DOI: 10.1016/J.Jmst.2020.01.035  0.453
2020 Liu F, Xin R, Zhang M, Pérez-Prado MT, Liu Q. Evaluating the orientation relationship of prismatic precipitates generated by detwinning in Mg alloys Acta Materialia. 195: 263-273. DOI: 10.1016/J.Actamat.2020.05.031  0.502
2020 Guo C, Xiao Y, Xin R. Evaluation of Twinning Behavior in Rolling of Mg Alloys with Three Kinds of Textures by a Generalized Schmid Factor Metals and Materials International. 26: 1-7. DOI: 10.1007/S12540-019-00378-0  0.556
2020 Zhu Y, Liu F, Xin R, Song B, Liu Q. Influence of Aging Prior to Extrusion on the Microstructure and Mechanical Properties of an Extruded AZ91 Alloy Advanced Engineering Materials. 22: 2000201. DOI: 10.1002/Adem.202000201  0.508
2019 Song B, She J, Guo N, Qiu R, Pan H, Chai L, Yang C, Guo S, Xin R. Regulating Precipitates by Simple Cold Deformations to Strengthen Mg Alloys: A Review. Materials (Basel, Switzerland). 12. PMID 31394761 DOI: 10.3390/Ma12162507  0.552
2019 Ren W, Li J, Xin R. Texture dependent shifting behavior of neutral layer in bending of magnesium alloys Scripta Materialia. 170: 6-10. DOI: 10.1016/J.Scriptamat.2019.05.028  0.457
2019 Liu F, Xin R, Wang C, Song B, Liu Q. Regulating precipitate orientation in Mg-Al alloys by coupling twinning, aging and detwinning processes Scripta Materialia. 158: 131-135. DOI: 10.1016/J.Scriptamat.2018.08.049  0.544
2019 Ren W, Xin R, Liu D. Modeling the strongly localized deformation behavior in a magnesium alloy with complicated texture distribution Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 762: 138103. DOI: 10.1016/J.Msea.2019.138103  0.475
2019 Song B, Yang Q, Zhou T, Chai L, Guo N, Liu T, Guo S, Xin R. Texture control by {10-12} twinning to improve the formability of Mg alloys: A review Journal of Materials Science & Technology. 35: 2269-2282. DOI: 10.1016/J.Jmst.2019.03.045  0.549
2019 Liu F, Guo C, Xin R, Wu G, Liu Q. Evaluation of the reliability of twin variant analysis in Mg alloys by in situ EBSD technique Journal of Magnesium and Alloys. 7: 258-263. DOI: 10.1016/J.Jma.2019.02.004  0.477
2019 Ren W, Xin R, Xu J, Song B, Zhang L, Liu Q. Effects of precipitate type on twin/slip activity in ZK60 alloys and yield asymmetry Journal of Alloys and Compounds. 792: 610-616. DOI: 10.1016/J.Jallcom.2019.04.085  0.482
2019 Xin R, Liu Z, Sun Y, Wang H, Guo C, Ren W, Liu Q. Understanding common grain boundary twins in Mg alloys by a composite Schmid factor International Journal of Plasticity. 123: 208-223. DOI: 10.1016/J.Ijplas.2019.07.018  0.519
2019 Song B, Liu T, Xin R, Yang H, Guo N, Chai L, Huang Y, Hort N. Influence of Torsion on Precipitation and Hardening Effects during Aging of an Extruded AZ91 Alloy Journal of Materials Engineering and Performance. 28: 4403-4414. DOI: 10.1007/S11665-019-04152-6  0.505
2019 Zhao C, Xin R, Ren F. The Size Dependent Deformation and Strengthening Mechanisms of Nanolayered Co/Ag Micropillars Metallurgical and Materials Transactions A. 50: 5640-5649. DOI: 10.1007/S11661-019-05464-X  0.372
2019 Guo C, Xin R, Wu G, Liu F, Hu G, Liu Q. Observation of Twin Transmission Process in Mg Alloys by In Situ EBSD Advanced Engineering Materials. 21: 1801340. DOI: 10.1002/Adem.201801340  0.509
2018 Yan Z, Wang K, Zhou Y, Zhu X, Xin R, Liu Q. Crystallographic orientation dependent crack nucleation during the compression of a widmannstätten-structure α/β titanium alloy Scripta Materialia. 156: 110-114. DOI: 10.1016/J.Scriptamat.2018.07.023  0.376
2018 Li D, Wang K, Yan Z, Cao Y, Misra R, Xin R, Liu Q. Evolution of microstructure and tensile properties during the three-stage heat treatment of TA19 titanium alloy Materials Science and Engineering: A. 716: 157-164. DOI: 10.1016/J.Msea.2018.01.046  0.384
2018 Liu Z, Xin R, Wu X, Liu D, Liu Q. Improvement in the strength of friction-stir-welded ZK60 alloys via post-weld compression and aging treatment Materials Science and Engineering: A. 712: 493-501. DOI: 10.1016/J.Msea.2017.12.008  0.546
2018 Wang K, Wu M, Yan Z, Li D, Xin R, Liu Q. Dynamic restoration and deformation heterogeneity during hot deformation of a duplex-structure TC21 titanium alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 712: 440-452. DOI: 10.1016/J.Msea.2017.11.127  0.427
2018 Tan L, Zhang X, Xia T, Sun Q, Huang G, Xin R, Liu Q. {101¯2}−{101¯2} double tensile twinning in a Mg-3Al-1Zn alloy sheet during cyclic deformation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 711: 205-211. DOI: 10.1016/J.Msea.2017.11.021  0.523
2018 Huang Q, Xin R. An algorithm for automatic identification of double twin variants in Mg alloys Materials Characterization. 141: 370-374. DOI: 10.1016/J.Matchar.2018.04.028  0.412
2018 Wang K, Wu M, Yan Z, Li D, Xin R, Liu Q. Microstructure evolution and static recrystallization during hot rolling and annealing of an equiaxed-structure TC21 titanium alloy Journal of Alloys and Compounds. 752: 14-22. DOI: 10.1016/J.Jallcom.2018.04.148  0.479
2017 Song B, Wang C, Guo N, Pan H, Xin R. Improving Tensile and Compressive Properties of an Extruded AZ91 Rod by the Combined Use of Torsion Deformation and Aging Treatment. Materials (Basel, Switzerland). 10. PMID 28772638 DOI: 10.3390/Ma10030280  0.503
2017 Wei P, Wang B, Lu X, Xin R, Ren F. Bio-inspired immobilization of strontium substituted hydroxyapatite nanocrystals and alendronate on the surface of AZ31 magnesium alloy for osteoporotic fracture repair Surface and Coatings Technology. 313: 381-390. DOI: 10.1016/J.Surfcoat.2017.01.108  0.412
2017 Guo N, Li D, Yu H, Xin R, Zhang Z, Li X, Liu C, Song B, Chai L. Annealing behavior of gradient structured copper and its effect on mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 702: 331-342. DOI: 10.1016/J.Msea.2017.07.023  0.425
2017 Song B, Pan H, Chai L, Guo N, Zhao H, Xin R. Evolution of gradient microstructure in an extruded AZ31 rod during torsion and annealing and its effects on mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 689: 78-88. DOI: 10.1016/J.Msea.2017.02.042  0.535
2017 He W, Zheng L, Xin R, Liu Q. Microstructure-based modeling of tensile deformation of a friction stir welded AZ31 Mg alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 687: 63-72. DOI: 10.1016/J.Msea.2017.01.053  0.588
2017 Wang C, Xin R, Li D, Song B, Wu M, Liu Q. Enhancing the age-hardening response of rolled AZ80 alloy by pre-twinning deformation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 680: 152-156. DOI: 10.1016/J.Msea.2016.10.094  0.566
2017 Li R, Xin R, Liu Q, Chapuis A, Liu S, Fu G, Zong L. Effect of grain size, texture and density of precipitates on the hardness and tensile yield stress of Mg-14Gd-0.5Zr alloys Materials & Design. 114: 450-458. DOI: 10.1016/J.Matdes.2016.10.074  0.551
2017 Abedi HR, Hanzaki AZ, Liu Z, Xin R, Haghdadi N, Hodgson PD. Continuous dynamic recrystallization in low density steel Materials & Design. 114: 55-64. DOI: 10.1016/J.Matdes.2016.10.044  0.522
2017 Liu D, Xin R, Zhao L, Hu Y. Effect of textural variation and twinning activity on fracture behavior of friction stir welded AZ31 Mg alloy in bending tests Journal of Alloys and Compounds. 693: 808-815. DOI: 10.1016/J.Jallcom.2016.09.187  0.427
2017 Song B, Pan H, Ren W, Guo N, Wu Z, Xin R. Tension-compression asymmetry of a rolled Mg-Y-Nd alloy Metals and Materials International. 23: 683-690. DOI: 10.1007/S12540-017-6853-Z  0.517
2017 Wang C, Xin R, Li D, Song B, Liu Z, Liu Q. Tailoring the Microstructure and Mechanical Property of AZ80 Alloys by Multiple Twinning and Aging Precipitation Advanced Engineering Materials. 19: 1700332. DOI: 10.1002/Adem.201700332  0.588
2017 Song B, Shu X, Pan H, Li G, Guo N, Liu T, Chai L, Xin R. Influence of Torsion Route on the Microstructure and Mechanical Properties of Extruded AZ31 Rods Advanced Engineering Materials. 19: 1700267. DOI: 10.1002/Adem.201700267  0.507
2017 Xin R, Wang M, Liu Z, Chen X, Huang G, Liu Q. Evaluation of Textural Effect on the Rollability of AZ31 Alloys by Wedge‐Shaped Sample Design Advanced Engineering Materials. 19: 1700035. DOI: 10.1002/Adem.201700035  0.485
2017 Wang K, Sun D, Wu Y, Xin R, Wu M, Liu Q. Correlation between Flow Behavior and Microstructure Evolution during α/β Deformation of TA19 Titanium Alloy** Advanced Engineering Materials. 19: 1600758. DOI: 10.1002/Adem.201600758  0.449
2016 Liu Z, Xin R, Li D, Sun L, Liu Q. Comparative study on twinning characteristics during two post-weld compression paths and their effects on joint enhancement. Scientific Reports. 6: 39779. PMID 28008982 DOI: 10.1038/Srep39779  0.549
2016 Yu H, Xin Y, Chapuis A, Huang X, Xin R, Liu Q. The different effects of twin boundary and grain boundary on reducing tension-compression yield asymmetry of Mg alloys. Scientific Reports. 6: 29283. PMID 27375280 DOI: 10.1038/Srep29283  0.44
2016 Wu M, Xin R, Wang Y, Zhou Y, Wang K, Liu Q. Microstructure, texture and mechanical properties of commercial high-purity thick titanium plates jointed by electron beam welding Materials Science and Engineering A. 677: 50-57. DOI: 10.1016/J.Msea.2016.09.030  0.456
2016 Liu Z, Xin R, Yu H, Guo C, Liu Q. Twin pattern evolution in a fine-grained Mg alloy subjected to indentation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 673: 430-435. DOI: 10.1016/J.Msea.2016.07.097  0.549
2016 Liu D, Xin R, Hongni Y, Liu Z, Zheng X, Liu Q. Comparative examinations on the activity and variant selection of twinning during tension and compression of magnesium alloys Materials Science and Engineering A. 658: 229-237. DOI: 10.1016/J.Msea.2016.01.098  0.559
2016 Liu Z, Xin R, Liu D, Shu X, Liu Q. Textural variation in triple junction region of friction stir welded Mg alloys and its influence on twinning and fracture Materials Science and Engineering: A. 658: 185-191. DOI: 10.1016/J.Msea.2016.01.097  0.514
2016 Xin R, Ding C, Guo C, Liu Q. Crystallographic analysis on the activation of multiple twins in rolled AZ31 Mg alloy sheets during uniaxial and plane strain compression Materials Science and Engineering A. 652: 42-50. DOI: 10.1016/J.Msea.2015.11.033  0.504
2016 Song B, Guo N, Xin R, Pan H, Guo C. Strengthening and toughening of extruded magnesium alloy rods by combining pre-torsion deformation with subsequent annealing Materials Science and Engineering A. 650: 300-304. DOI: 10.1016/J.Msea.2015.10.069  0.585
2016 Song B, Xin R, Guo N, Chen Z, Yang X, Liu Q. Influence of basal slip activity in twin lamellae on mechanical behavior of Mg alloys Materials Letters. 176: 147-150. DOI: 10.1016/J.Matlet.2016.04.113  0.5
2016 Liu G, Xin R, Liu F, Liu Q. Twinning characteristic in tension of magnesium alloys and its effect on mechanical properties Materials and Design. 107: 503-510. DOI: 10.1016/J.Matdes.2016.06.073  0.551
2016 Guo C, Xin R, Xiao Y, Liu G, Liu Q. Observation and analysis of the coexistence of two "opposite" twin modes in a Mg-Al-Zn alloy Materials and Design. 102: 196-201. DOI: 10.1016/J.Matdes.2016.04.034  0.488
2016 Guo N, Song B, Yu H, Xin R, Wang B, Liu T. Enhancing tensile strength of Cu by introducing gradient microstructures via a simple torsion deformation Materials and Design. 90: 545-550. DOI: 10.1016/J.Matdes.2015.10.157  0.456
2016 Li R, Xin R, Chapuis A, Liu Q, Fu G, Zong L, Yu Y, Guo B, Guo S. Effect of cold rolling on microstructure and mechanical property of extruded Mg-4Sm alloy during aging Materials Characterization. 112: 81-86. DOI: 10.1016/J.Matchar.2015.12.011  0.576
2016 Liu G, Xin R, Shu X, Wang C, Liu Q. The mechanism of twinning activation and variant selection in magnesium alloys dominated by slip deformation Journal of Alloys and Compounds. 687: 352-359. DOI: 10.1016/J.Jallcom.2016.06.136  0.551
2016 Xin R, Liu D, Shu X, Li B, Yang X, Liu Q. Influence of welding parameter on texture distribution and plastic deformation behavior of as-rolled AZ31 Mg alloys Journal of Alloys and Compounds. 670: 64-71. DOI: 10.1016/J.Jallcom.2016.02.023  0.528
2016 Xin R, Zheng X, Liu Z, Liu D, Qiu R, Li Z, Liu Q. Microstructure and texture evolution of an Mg-Gd-Y-Nd-Zr alloy during friction stir processing Journal of Alloys and Compounds. 659: 51-59. DOI: 10.1016/J.Jallcom.2015.11.034  0.573
2016 Song B, Zhao H, Chai L, Guo N, Pan H, Chen H, Xin R. Preparation and characterization of Mg alloy rods with gradient microstructure by torsion deformation Metals and Materials International. 22: 887-896. DOI: 10.1007/S12540-016-6226-Z  0.556
2016 Huang Q, Xin R. Correlation between Boundary Misorientation and a Geometric Parameter for Cross-Boundary Twins in Mg Alloys Advanced Engineering Materials. 19: 1600614. DOI: 10.1002/Adem.201600614  0.477
2016 Guo N, Li X, Xiao M, Xin R, Chai L, Song B, Yu H, Li L. Microstructures and Mechanical Properties of Commercial Hot-Extruded Copper Processed by Torsion Deformation Advanced Engineering Materials. DOI: 10.1002/Adem.201600252  0.466
2016 Wang K, Sun D, Wu Y, Xin R, Wu M, Liu Q. Correlation between Flow Behavior and Microstructure Evolution during α/β Deformation of TA19 Titanium Alloy Advanced Engineering Materials. 18: 1808-1815. DOI: 10.1002/Adem.201600198  0.476
2015 Liu D, Xin R, Li Z, Liu Z, Zheng X, Liu Q. The activation of twinning and texture evolution during bending of friction stir welded magnesium alloys Materials Science and Engineering A. 646: 145-153. DOI: 10.1016/J.Msea.2015.08.059  0.507
2015 Song B, Xin R, Guo N, Xu J, Sun L, Liu Q. Dependence of tensile and compressive deformation behavior on aging precipitation in rolled ZK60 alloys Materials Science and Engineering A. 639: 724-731. DOI: 10.1016/J.Msea.2015.05.088  0.553
2015 Song B, Xin R, Liao A, Yu W, Liu Q. Enhancing stretch formability of rolled Mg sheets by pre-inducing contraction twins and recrystallization annealing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 627: 369-373. DOI: 10.1016/J.Msea.2015.01.027  0.544
2015 Song B, Xin R, Zheng X, Chen G, Liu Q. Activation of multiple twins by pre-tension and compression to enhance the strength of Mg–3Al–1Zn alloy plates Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 621: 100-104. DOI: 10.1016/J.Msea.2014.10.061  0.601
2015 Xin R, Liang Y, Ding C, Guo C, Wang B, Liu Q. Geometrical compatibility factor analysis of paired extension twins in extruded Mg-3Al-1Zn alloys Materials and Design. 86: 656-663. DOI: 10.1016/J.Matdes.2015.07.130  0.547
2015 Guo N, Song B, Guo C, Xin R, Liu Q. Improving tensile and compressive properties of magnesium alloy rods via a simple pre-torsion deformation Materials and Design. 83: 270-275. DOI: 10.1016/J.Matdes.2015.06.071  0.497
2015 Guo C, Xin R, Xu J, Song B, Liu Q. Strain compatibility effect on the variant selection of connected twins in magnesium Materials and Design. 76: 71-76. DOI: 10.1016/J.Matdes.2015.03.041  0.518
2015 He W, Luan B, Xin R, Xu J, Liu Q. A multi-scale model for description of strain localization in friction stir welded magnesium alloy Computational Materials Science. 104: 162-171. DOI: 10.1016/J.Commatsci.2015.04.002  0.503
2014 Xin R, Guo C, Xu Z, Liu G, Huang X, Liu Q. Characteristics of long {10-12} twin bands in sheet rolling of a magnesium alloy Scripta Materialia. 74: 96-99. DOI: 10.1016/J.Scriptamat.2013.11.008  0.502
2014 Guo C, Xin R, Zheng X, Xiao Y, Ding C, Liu Q. Influence of observation plane on twin variant identification in magnesium via trace and misorientation analysis Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 618: 558-562. DOI: 10.1016/J.Msea.2014.09.065  0.525
2014 Song B, Xin R, Liang Y, Chen G, Liu Q. Twinning characteristic and variant selection in compression of a pre-side-rolled Mg alloy sheet Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 614: 106-115. DOI: 10.1016/J.Msea.2014.07.026  0.582
2014 Guo C, Xin R, Ding C, Song B, Liu Q. Understanding of variant selection and twin patterns in compressed Mg alloy sheets via combined analysis of Schmid factor and strain compatibility factor Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 609: 92-101. DOI: 10.1016/J.Msea.2014.04.103  0.551
2014 Liu D, Xin R, Xiao Y, Zhou Z, Liu Q. Strain localization in friction stir welded magnesium alloy during tension and compression deformation Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 609: 88-91. DOI: 10.1016/J.Msea.2014.04.089  0.538
2014 Xin R, Sun L, Liu D, Zhou Z, Liu Q. Effect of subsequent tension and annealing on microstructure evolution and strength enhancement of friction stir welded Mg alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 602: 1-10. DOI: 10.1016/J.Msea.2014.02.062  0.597
2014 Xin R, Wang M, Huang X, Guo C, Liu Q. Observation and Schmid factor analysis of multiple twins in a warm-rolled Mg–3Al–1Zn alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 596: 41-44. DOI: 10.1016/J.Msea.2013.12.030  0.416
2013 Song B, Xin R, Sun L, Chen G, Liu Q. Enhancing the strength of rolled ZK60 alloys via the combined use of twinning deformation and aging treatment Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 582: 68-75. DOI: 10.1016/J.Msea.2013.06.047  0.518
2013 Xin R, Liu D, Xu Z, Li B, Liu Q. Changes in texture and microstructure of friction stir welded Mg alloy during post-rolling and their effects on mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 582: 178-187. DOI: 10.1016/J.Msea.2013.06.005  0.599
2013 Liu D, Xin R, Sun L, Zhou Z, Liu Q. Influence of sampling design on tensile properties and fracture behavior of friction stir welded magnesium alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 576: 207-216. DOI: 10.1016/J.Msea.2013.03.037  0.481
2013 Li N, Huang G, Xin R, Liu Q. Effect of initial texture on dynamic recrystallization and deformation mechanisms in AZ31 Mg alloy extruded at 573K Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 569: 18-26. DOI: 10.1016/J.Msea.2013.01.027  0.495
2013 Xin R, Liu D, Li B, Sun L, Zhou Z, Liu Q. Mechanisms of fracture and inhomogeneous deformation on transverse tensile test of friction-stir-processed AZ31 Mg alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 565: 333-341. DOI: 10.1016/J.Msea.2012.12.053  0.518
2013 Liu D, Xin R, Zheng X, Zhou Z, Liu Q. Microstructure and mechanical properties of friction stir welded dissimilar Mg alloys of ZK60–AZ31 Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 561: 419-426. DOI: 10.1016/J.Msea.2012.10.052  0.526
2012 Song B, Xin R, Chen G, Zhang X, Liu Q. Improving tensile and compressive properties of magnesium alloy plates by pre-cold rolling Scripta Materialia. 66: 1061-1064. DOI: 10.1016/J.Scriptamat.2012.02.047  0.527
2012 Wang B, Xin R, Huang G, Liu Q. Effect of crystal orientation on the mechanical properties and strain hardening behavior of magnesium alloy AZ31 during uniaxial compression Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 534: 588-593. DOI: 10.1016/J.Msea.2011.12.013  0.499
2012 Xin R, Luo Y, Zuo A, Gao J, Liu Q. Texture effect on corrosion behavior of AZ31 Mg alloy in simulated physiological environment Materials Letters. 72: 1-4. DOI: 10.1016/J.Matlet.2011.11.032  0.473
2012 Xin R, Song B, Zeng K, Huang G, Liu Q. Effect of aging precipitation on mechanical anisotropy of an extruded Mg–Y–Nd alloy Materials & Design. 34: 384-388. DOI: 10.1016/J.Matdes.2011.08.043  0.592
2012 Xin R, Li B, Liao A, Zhou Z, Liu Q. Correlation Between Texture Variation and Transverse Tensile Behavior of Friction-Stir-Processed AZ31 Mg Alloy Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 43: 2500-2508. DOI: 10.1007/S11661-012-1080-1  0.556
2012 Li N, Huang G, Xin R, Liu Q. Influence of extrusion ratio on microstructure and texture developments of high-temperature extruded AZ31 Mg alloy Science China-Technological Sciences. 55: 490-495. DOI: 10.1007/S11431-011-4671-Y  0.558
2011 Wang M, Xin R, Wang B, Liu Q. Effect of initial texture on dynamic recrystallization of AZ31 Mg alloy during hot rolling Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 2941-2951. DOI: 10.1016/J.Msea.2010.11.069  0.499
2011 Xin R, Li B, Li L, Liu Q. Influence of texture on corrosion rate of AZ31 Mg alloy in 3.5wt.% NaCl Materials & Design. 32: 4548-4552. DOI: 10.1016/J.Matdes.2011.04.031  0.475
2011 Xin R, Li L, Zeng K, Song B, Liu Q. Structural examination of aging precipitation in a Mg–Y–Nd alloy at different temperatures Materials Characterization. 62: 535-539. DOI: 10.1016/J.Matchar.2011.03.007  0.435
2010 Ren F, Leng Y, Xin R, Ge X. Synthesis, characterization and ab initio simulation of magnesium-substituted hydroxyapatite. Acta Biomaterialia. 6: 2787-96. PMID 20036765 DOI: 10.1016/J.Actbio.2009.12.044  0.345
2010 Xin R, Wang B, Zhou Z, Huang G, Liu Q. Effects of strain rate and temperature on microstructure and texture for AZ31 during uniaxial compression Transactions of Nonferrous Metals Society of China. 20. DOI: 10.1016/S1003-6326(10)60545-6  0.459
2010 Xin R, Zhang Q, Gao J. Identification of the wollastonite phase in sintered 45S5 bioglass and its effect on in vitro bioactivity Journal of Non-Crystalline Solids. 356: 1180-1184. DOI: 10.1016/J.Jnoncrysol.2010.03.010  0.319
2009 Ren F, Xin R, Ge X, Leng Y. Characterization and structural analysis of zinc-substituted hydroxyapatites. Acta Biomaterialia. 5: 3141-9. PMID 19446055 DOI: 10.1016/J.Actbio.2009.04.014  0.312
2009 Xin R, Wang B, Chen X, Huang G, Liu Q. Examination of dynamic recrystallization during compression of AZ31 magnesium Science China-Technological Sciences. 52: 176-179. DOI: 10.1007/S11431-008-0279-2  0.477
2008 Luo J, Chen X, Xin R, Huang G, Liu Q. Comparison of microstructure and properties of AZ31 Mg alloy sheet produced through different routes Transactions of Nonferrous Metals Society of China. 18. DOI: 10.1016/S1003-6326(10)60201-4  0.524
2008 Huang G, Liu Q, Wang L, Xin R, Chen X, Pan F. Microstructure and texture evolution of AZ31 magnesium alloy during rolling Transactions of Nonferrous Metals Society of China. 18. DOI: 10.1016/S1003-6326(10)60196-3  0.577
2008 Wang B, Xin R, Huang G, Chen X, Liu Q. Hot-deformation behaviors of AZ31 alloys with different initial states Transactions of Nonferrous Metals Society of China. 18. DOI: 10.1016/S1003-6326(10)60191-4  0.499
2008 Xin R, Leng Y, Wang N. Ultrastructure study of hydroxyapatite precipitation on ceramic surfaces in dog model Materials Science and Engineering: C. 28: 1255-1259. DOI: 10.1016/J.Msec.2007.11.006  0.352
Show low-probability matches.