Year |
Citation |
Score |
2021 |
Shishvan SS, Fleck NA, Deshpande VS. The initiation of void growth during stripping of Li electrodes in solid electrolyte cells Journal of Power Sources. 488: 229437. DOI: 10.1016/J.JPOWSOUR.2020.229437 |
0.314 |
|
2021 |
Li K, Seiler P, Deshpande V, Fleck N. Regulation of notch sensitivity of lattice materials by strut topology International Journal of Mechanical Sciences. 192: 106137. DOI: 10.1016/j.ijmecsci.2020.106137 |
0.354 |
|
2021 |
Roy U, Fleck N, Deshpande V. An assessment of a mechanism for void growth in Li anodes Extreme Mechanics Letters. 46: 101307. DOI: 10.1016/J.EML.2021.101307 |
0.319 |
|
2020 |
Seiler PE, Li K, Deshpande VS, Fleck NA. The Influence of Strut Waviness on the Tensile Response of Lattice Materials Journal of Applied Mechanics. 88. DOI: 10.1115/1.4049140 |
0.462 |
|
2020 |
Prusty RK, Narayan RL, Scherer M, Steiner U, Deshpande VS, Fleck NA, Ramamurty U. Spherical indentation response of a Ni double gyroid nanolattice Scripta Materialia. 188: 64-68. DOI: 10.1016/J.Scriptamat.2020.07.011 |
0.483 |
|
2020 |
Shishvan S, Fleck N, McMeeking R, Deshpande V. Dendrites as climbing dislocations in ceramic electrolytes: Initiation of growth Journal of Power Sources. 456: 227989. DOI: 10.1016/J.Jpowsour.2020.227989 |
0.445 |
|
2020 |
Liu Y, St-Pierre L, Fleck NA, Deshpande VS, Srivastava A. High fracture toughness micro-architectured materials Journal of the Mechanics and Physics of Solids. 143: 104060. DOI: 10.1016/J.Jmps.2020.104060 |
0.484 |
|
2020 |
Tankasala HC, Li T, Seiler PE, Deshpande VS, Fleck NA. An assessment of the J-integral test for a metallic foam Journal of the Mechanics and Physics of Solids. 141: 103958. DOI: 10.1016/J.Jmps.2020.103958 |
0.512 |
|
2020 |
Mirzajanzadeh M, Deshpande VS, Fleck NA. The swelling of cellulose foams due to liquid transport Journal of the Mechanics and Physics of Solids. 136: 103707. DOI: 10.1016/J.Jmps.2019.103707 |
0.454 |
|
2020 |
Tankasala HC, Fleck NA. The crack growth resistance of an elastoplastic lattice International Journal of Solids and Structures. 233-243. DOI: 10.1016/J.Ijsolstr.2019.10.007 |
0.366 |
|
2020 |
Skovsgaard SPH, Jensen HM, Fleck NA. Load transfer within the bolted joint of a laminate made from ultra-high molecular weight polyethylene fibres International Journal of Solids and Structures. 182-190. DOI: 10.1016/J.Ijsolstr.2019.08.014 |
0.372 |
|
2020 |
Shishvan SS, Fleck NA, McMeeking RM, Deshpande VS. Growth rate of lithium filaments in ceramic electrolytes Acta Materialia. 196: 444-455. DOI: 10.1016/J.Actamat.2020.06.060 |
0.428 |
|
2020 |
Bosco E, Suiker ASJ, Fleck NA. Crack channelling mechanisms in brittle coating systems under moisture or temperature gradients International Journal of Fracture. 1-30. DOI: 10.1007/S10704-020-00461-3 |
0.333 |
|
2019 |
Van Loock F, Bernardo V, Rodríguez Pérez MA, Fleck NA. The mechanics of solid-state nanofoaming. Proceedings. Mathematical, Physical, and Engineering Sciences. 475: 20190339. PMID 31736646 DOI: 10.1098/Rspa.2019.0339 |
0.361 |
|
2019 |
León JM, Loock FV, Bernardo V, Fleck NA, Rodríguez-Pérez MÁ. The influence of cell size on the mechanical properties of nanocellular PMMA Polymer. 181: 121805. DOI: 10.1016/J.Polymer.2019.121805 |
0.313 |
|
2019 |
Loock FV, Thouless MD, Fleck NA. Tensile fracture of an adhesive joint: the role of crack length and of material mismatch Journal of the Mechanics and Physics of Solids. 130: 330-348. DOI: 10.1016/J.Jmps.2019.06.004 |
0.372 |
|
2019 |
Martínez-Pañeda E, Deshpande VS, Niordson CF, Fleck NA. The role of plastic strain gradients in the crack growth resistance of metals Journal of the Mechanics and Physics of Solids. 126: 136-150. DOI: 10.1016/J.Jmps.2019.02.011 |
0.503 |
|
2019 |
Mirzajanzadeh M, Deshpande VS, Fleck NA. Water rise in a cellulose foam: By capillary or diffusional flow? Journal of the Mechanics and Physics of Solids. 124: 206-219. DOI: 10.1016/J.Jmps.2018.10.009 |
0.409 |
|
2019 |
Maloney K, Fleck N. Toughening strategies in adhesive joints International Journal of Solids and Structures. 158: 66-75. DOI: 10.1016/J.Ijsolstr.2018.08.028 |
0.389 |
|
2019 |
Boyce A, Tankasala H, Fleck N. Indentation of a layer on foam substrate International Journal of Mechanical Sciences. 150: 379-392. DOI: 10.1016/J.Ijmecsci.2018.10.038 |
0.445 |
|
2019 |
Martínez-Pañeda E, Fleck NA. Mode I crack tip fields: Strain gradient plasticity theory versus J2 flow theory European Journal of Mechanics a-Solids. 75: 381-388. DOI: 10.1016/J.Euromechsol.2019.02.009 |
0.377 |
|
2019 |
Tan W, Stallard JC, Smail FR, Boies AM, Fleck NA. The mechanical and electrical properties of direct-spun carbon nanotube mat-epoxy composites Carbon. 150: 489-504. DOI: 10.1016/J.Carbon.2019.04.118 |
0.35 |
|
2019 |
Seiler PE, Tankasala HC, Fleck NA. Creep failure of honeycombs made by rapid prototyping Acta Materialia. 178: 122-134. DOI: 10.1016/J.Actamat.2019.07.054 |
0.384 |
|
2019 |
Seiler PE, Tankasala HC, Fleck NA. The role of defects in dictating the strength of brittle honeycombs made by rapid prototyping Acta Materialia. 171: 190-200. DOI: 10.1016/J.Actamat.2019.03.036 |
0.325 |
|
2019 |
Bernardo V, Loock FV, Leon JM, Fleck NA, Rodriguez‐Perez MA. Mechanical Properties of PMMA‐Sepiolite Nanocellular Materials with a Bimodal Cellular Structure Macromolecular Materials and Engineering. 304: 1900041. DOI: 10.1002/Mame.201900041 |
0.349 |
|
2018 |
Tankasala HC, Deshpande VS, Fleck NA. Notch sensitivity of orthotropic solids: interaction of tensile and shear damage zones. International Journal of Fracture. 212: 123-142. PMID 30956386 DOI: 10.1007/S10704-018-0296-5 |
0.554 |
|
2018 |
Martínez-Pañeda E, Fleck NA. Crack growth resistance in metallic alloys: the role of isotropic versus kinematic hardening Journal of Applied Mechanics. 85: 111002. DOI: 10.1115/1.4040696 |
0.351 |
|
2018 |
Loock FV, Fleck NA. Deformation and failure maps for PMMA in uniaxial tension Polymer. 148: 259-268. DOI: 10.1016/J.Polymer.2018.06.027 |
0.355 |
|
2018 |
Yu B, Khaderi S, Deshpande VS, Fleck NA. The effect of matrix shear strength on the out-of-plane compressive strength of CFRP cross-ply laminates International Journal of Solids and Structures. 79-95. DOI: 10.1016/J.Ijsolstr.2018.01.023 |
0.577 |
|
2018 |
Maloney K, Fleck N. Damage tolerance of an architected adhesive joint International Journal of Solids and Structures. 9-19. DOI: 10.1016/J.Ijsolstr.2017.06.010 |
0.301 |
|
2018 |
Yu B, Deshpande VS, Fleck NA. Perforation of aluminium alloy-CFRP bilayer plates under quasi-static and impact loading International Journal of Impact Engineering. 121: 106-118. DOI: 10.1016/J.Ijimpeng.2018.06.011 |
0.488 |
|
2018 |
Maloney K, Fleck N. Tear resistance of a square-wave joint: Experiment versus cohesive zone model International Journal of Adhesion and Adhesives. 84: 9-17. DOI: 10.1016/J.Ijadhadh.2018.02.008 |
0.342 |
|
2018 |
Stallard J, Tan W, Smail F, Gspann T, Boies A, Fleck N. The mechanical and electrical properties of direct-spun carbon nanotube mats Extreme Mechanics Letters. 21: 65-75. DOI: 10.1016/J.Eml.2018.03.003 |
0.324 |
|
2018 |
Nakanishi K, Aria AI, Berwind MF, Weatherup RS, Eberl C, Hofmann S, Fleck NA. Compressive behavior and failure mechanisms of freestanding and composite 3D graphitic foams Acta Materialia. 159: 187-196. DOI: 10.1016/J.Actamat.2018.08.012 |
0.347 |
|
2018 |
Raina A, Deshpande VS, Fleck NA. Analysis of thermal desorption of hydrogen in metallic alloys Acta Materialia. 144: 777-785. DOI: 10.1016/J.Actamat.2017.11.011 |
0.434 |
|
2017 |
Tankasala HC, Deshpande VS, Fleck NA. Crack kinking at the tip of a mode I crack in an orthotropic solid. International Journal of Fracture. 207: 181-191. PMID 32025084 DOI: 10.1007/S10704-017-0227-X |
0.482 |
|
2017 |
Raina A, Deshpande VS, Fleck NA. Analysis of electro-permeation of hydrogen in metallic alloys. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 375. PMID 28607188 DOI: 10.1098/Rsta.2016.0409 |
0.445 |
|
2017 |
Tankasala H, Deshpande VS, Fleck NA. Tensile response of elastoplastic lattices at finite strain Journal of the Mechanics and Physics of Solids. 109: 307-330. DOI: 10.1016/J.Jmps.2017.02.002 |
0.541 |
|
2017 |
Fleck N, Khaderi S, McMeeking R, Arzt E. Cohesive detachment of an elastic pillar from a dissimilar substrate Journal of the Mechanics and Physics of Solids. 101: 30-43. DOI: 10.1016/J.Jmps.2017.01.001 |
0.396 |
|
2017 |
Yu B, Karthikeyan K, Deshpande V, Fleck N. Perforation resistance of CFRP beams to quasi-static and ballistic loading: The role of matrix strength International Journal of Impact Engineering. 108: 389-401. DOI: 10.1016/J.Ijimpeng.2017.04.002 |
0.563 |
|
2017 |
Tan J, Deshpande VS, Fleck NA. The effect of laminate lay-up on the multi-axial notched strength of CFRP panels: Simulation versus experiment European Journal of Mechanics a-Solids. 66: 309-321. DOI: 10.1016/J.Euromechsol.2017.08.002 |
0.568 |
|
2017 |
Fleck NA, Deshpande VS. FOREWORD for Collected Papers on IUTAM Symposium for Filling Gaps in Material Property Space, 13–16 March 2016. Cambridge, UK Extreme Mechanics Letters. 10: 1. DOI: 10.1016/J.Eml.2016.11.011 |
0.443 |
|
2017 |
Guha S, Deshpande V, Fleck N. Flaw sensitivity in rate-sensitive high strength alloys: An assessment and future research directions Extreme Mechanics Letters. 10: 70-77. DOI: 10.1016/J.Eml.2016.11.002 |
0.517 |
|
2017 |
Khaderi S, Scherer M, Hall C, Steiner U, Ramamurty U, Fleck N, Deshpande V. The indentation response of Nickel nano double gyroid lattices Extreme Mechanics Letters. 10: 15-23. DOI: 10.1016/J.Eml.2016.08.006 |
0.502 |
|
2017 |
Boyce AM, Deshpande VS, Fleck NA. On the Indentation Resistance of a PC Layer on PVC Foam Substrate Advanced Engineering Materials. 19: 1700075. DOI: 10.1002/Adem.201700075 |
0.541 |
|
2016 |
Tan JL, Deshpande VS, Fleck NA. Prediction of failure in notched carbon-fibre-reinforced-polymer laminates under multi-axial loading. Philosophical Transactions. Series a, Mathematical, Physical, and Engineering Sciences. 374. PMID 27242302 DOI: 10.1098/Rsta.2015.0273 |
0.554 |
|
2016 |
Ronan W, Deshpande VS, Fleck NA. The tensile ductility of cellular Solids: The role of imperfections International Journal of Solids and Structures. 200-213. DOI: 10.1016/J.Ijsolstr.2016.10.004 |
0.41 |
|
2016 |
Balijepalli RG, Begley MR, Fleck NA, McMeeking RM, Arzt E. Numerical simulation of the edge stress singularity and the adhesion strength for compliant mushroom fibrils adhered to rigid substrates International Journal of Solids and Structures. 85: 160-171. DOI: 10.1016/J.Ijsolstr.2016.02.018 |
0.329 |
|
2015 |
Tankasala HC, Deshpande VS, Fleck NA. 2013 koiter medal paper: Crack-tip fields and toughness of two-dimensional elastoplastic lattices Journal of Applied Mechanics, Transactions Asme. 82. DOI: 10.1115/1.4030666 |
0.54 |
|
2015 |
Fleck NA, Hutchinson JW, Willis JR. Guidelines for constructing strain gradient plasticity theories Journal of Applied Mechanics, Transactions Asme. 82. DOI: 10.1115/1.4030323 |
0.545 |
|
2015 |
Ayas C, Fleck NA, Deshpande VS. Hydrogen embrittlement of a bimaterial Mechanics of Materials. 80: 193-202. DOI: 10.1016/J.Mechmat.2014.06.002 |
0.506 |
|
2015 |
Khaderi S, Fleck N, Arzt E, McMeeking R. Detachment of an adhered micropillar from a dissimilar substrate Journal of the Mechanics and Physics of Solids. 75: 159-183. DOI: 10.1016/J.Jmps.2014.11.004 |
0.313 |
|
2015 |
Attwood JP, Fleck NA, Wadley HNG, Deshpande VS. The compressive response of ultra-high molecular weight polyethylene fibres and composites International Journal of Solids and Structures. 71: 141-155. DOI: 10.1016/J.Ijsolstr.2015.06.015 |
0.539 |
|
2015 |
St-Pierre L, Fleck NA, Deshpande VS. The dynamic indentation response of sandwich panels with a corrugated or Y-frame core International Journal of Mechanical Sciences. 92: 279-289. DOI: 10.1016/J.Ijmecsci.2014.11.021 |
0.498 |
|
2015 |
St-Pierre L, Deshpande VS, Fleck NA. The low velocity impact response of sandwich beams with a corrugated core or a Y-frame core International Journal of Mechanical Sciences. 91: 71-80. DOI: 10.1016/J.Ijmecsci.2014.02.014 |
0.527 |
|
2015 |
Tan JLY, Deshpande VS, Fleck NA. Failure mechanisms of a notched CFRP laminate under multi-axial loading Composites Part a: Applied Science and Manufacturing. 77: 56-66. DOI: 10.1016/J.Compositesa.2015.06.005 |
0.534 |
|
2015 |
Fleck NA, Willis JR. Strain gradient plasticity: energetic or dissipative? Acta Mechanica Sinica/Lixue Xuebao. DOI: 10.1007/S10409-015-0468-8 |
0.382 |
|
2014 |
Miura K, Kashiwagi M, Esaki K, Choudhry RS, Tan JLY, Deshpande VS, Fleck NA. OS1407 Fracture Behavior of CFRP Structure from Stress-raising Defects under Combined Loading The Proceedings of the Materials and Mechanics Conference. 2014: _OS1407-1_-_OS1407-3. DOI: 10.1299/JSMEMM.2014._OS1407-1_ |
0.39 |
|
2014 |
Fleck NA, Hutchinson JW, Willis JR. Strain gradient plasticity under non-proportional loading Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 470. DOI: 10.1098/Rspa.2014.0267 |
0.544 |
|
2014 |
Attwood JP, Khaderi SN, Karthikeyan K, Fleck NA, Omasta MR, Wadley HNG, Deshpande VS. The out-of-plane compressive response of Dyneema ® composites Journal of the Mechanics and Physics of Solids. 70: 200-226. DOI: 10.1016/J.Jmps.2014.05.017 |
0.556 |
|
2014 |
Ayas C, Deshpande VS, Fleck NA. A fracture criterion for the notch strength of high strength steels in the presence of hydrogen Journal of the Mechanics and Physics of Solids. 63: 80-93. DOI: 10.1016/J.Jmps.2013.10.002 |
0.504 |
|
2014 |
Liu G, Thouless MD, Deshpande VS, Fleck NA. Collapse of a composite beam made from ultra high molecular-weight polyethylene fibres Journal of the Mechanics and Physics of Solids. 63: 320-335. DOI: 10.1016/J.Jmps.2013.08.021 |
0.579 |
|
2014 |
Cocks A, Fleck N, Lampenscherf S. A brick model for asperity sintering and creep of APS TBCs Journal of the Mechanics and Physics of Solids. 63: 412-431. DOI: 10.1016/J.Jmps.2013.08.016 |
0.362 |
|
2014 |
Khaderi SN, Deshpande VS, Fleck NA. The stiffness and strength of the gyroid lattice International Journal of Solids and Structures. DOI: 10.1016/J.Ijsolstr.2014.06.024 |
0.541 |
|
2014 |
St-Pierre L, Fleck NA, Deshpande VS. The predicted compressive strength of a pyramidal lattice made from case hardened steel tubes International Journal of Solids and Structures. 51: 41-52. DOI: 10.1016/J.Ijsolstr.2013.09.008 |
0.534 |
|
2013 |
Liu T, Fleck NA, Wadley HNG, Deshpande VS. The impact of sand slugs against beams and plates: Coupled discrete particle/finite element simulations Journal of the Mechanics and Physics of Solids. 61: 1798-1821. DOI: 10.1016/J.Jmps.2013.03.008 |
0.529 |
|
2013 |
Park S, Uth T, Fleck NA, Wadley HNG, Deshpande VS. Sand column impact onto a Kolsky pressure bar International Journal of Impact Engineering. 62: 229-242. DOI: 10.1016/J.Ijimpeng.2013.07.003 |
0.458 |
|
2013 |
McShane GJ, Deshpande VS, Fleck NA. A laboratory-scale buried charge simulator International Journal of Impact Engineering. 62: 210-218. DOI: 10.1016/J.Ijimpeng.2013.06.007 |
0.459 |
|
2013 |
Karthikeyan K, Russell BP, Fleck NA, O'Masta M, Wadley HNG, Deshpande VS. The soft impact response of composite laminate beams International Journal of Impact Engineering. 60: 24-36. DOI: 10.1016/J.Ijimpeng.2013.04.002 |
0.534 |
|
2013 |
Russell BP, Karthikeyan K, Deshpande VS, Fleck NA. The high strain rate response of Ultra High Molecular-weight Polyethylene: From fibre to laminate International Journal of Impact Engineering. 60: 1-9. DOI: 10.1016/J.Ijimpeng.2013.03.010 |
0.507 |
|
2013 |
Karthikeyan K, Russell BP, Fleck NA, Wadley HNG, Deshpande VS. The effect of shear strength on the ballistic response of laminated composite plates European Journal of Mechanics, a/Solids. 42: 35-53. DOI: 10.1016/J.Euromechsol.2013.04.002 |
0.551 |
|
2013 |
Noselli G, Deshpande VS, Fleck NA. An analysis of competing toughening mechanisms in layered and particulate solids International Journal of Fracture. 183: 241-258. DOI: 10.1007/S10704-013-9890-8 |
0.495 |
|
2012 |
Karthikeyan K, Russell BP, Deshpande VS, Fleck NA. Multi-hit armour characterisation of metal-composite bi-layers Journal of Mechanics of Materials and Structures. 7: 721-734. DOI: 10.2140/Jomms.2012.7.721 |
0.495 |
|
2012 |
St-Pierre L, Fleck NA, Deshpande VS. Sandwich Beams with Corrugated and Y-frame cores: Does the back face contribute to the bending response? Journal of Applied Mechanics, Transactions Asme. 79. DOI: 10.1115/1.4004555 |
0.513 |
|
2012 |
Danas K, Deshpande VS, Fleck NA. Size effects in the conical indentation of an elasto-plastic solid Journal of the Mechanics and Physics of Solids. 60: 1605-1625. DOI: 10.1016/J.Jmps.2012.05.002 |
0.533 |
|
2012 |
McShane GJ, Pingle SM, Deshpande VS, Fleck NA. Dynamic buckling of an inclined strut International Journal of Solids and Structures. 49: 2830-2838. DOI: 10.1016/J.Ijsolstr.2012.03.045 |
0.542 |
|
2012 |
Comley K, Fleck N. The compressive response of porcine adipose tissue from low to high strain rate International Journal of Impact Engineering. 46: 1-10. DOI: 10.1016/J.Ijimpeng.2011.12.009 |
0.354 |
|
2012 |
Pingle SM, Fleck NA, Wadley HNG, Deshpande VS. Discrete element calculations of the impact of a sand column against rigid structures International Journal of Impact Engineering. 45: 74-89. DOI: 10.1016/J.Ijimpeng.2011.10.005 |
0.438 |
|
2012 |
Russell BP, Liu T, Fleck NA, Deshpande VS. The soft impact of composite sandwich beams with a square-honeycomb core International Journal of Impact Engineering. 48: 65-81. DOI: 10.1016/J.Ijimpeng.2011.04.007 |
0.535 |
|
2012 |
Park S, Russell BP, Deshpande VS, Fleck NA. Dynamic compressive response of composite square honeycombs Composites Part a: Applied Science and Manufacturing. 43: 527-536. DOI: 10.1016/J.Compositesa.2011.11.022 |
0.56 |
|
2011 |
Russell BP, Liu T, Fleck NA, Deshpande VS. Quasi-static three-point bending of carbon fiber sandwich beams with square honeycomb cores Journal of Applied Mechanics, Transactions Asme. 78. DOI: 10.1115/1.4003221 |
0.539 |
|
2011 |
Tagarielli VL, Fleck NA. The Shear Response of a Thin Aluminum Layer Journal of Applied Mechanics. 78: 14505. DOI: 10.1115/1.4002210 |
0.642 |
|
2011 |
Wang M, Fleck NA, Evans AG. Elastodynamic Erosion of Thermal Barrier Coatings Journal of the American Ceramic Society. 94. DOI: 10.1111/J.1551-2916.2011.04459.X |
0.327 |
|
2011 |
Pingle SM, Fleck NA, Deshpande VS, Wadley HNG. Collapse mechanism maps for a hollow pyramidal lattice Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 467: 985-1011. DOI: 10.1098/Rspa.2010.0329 |
0.559 |
|
2011 |
Pingle SM, Fleck NA, Deshpande VS, Wadley HNG. Collapse mechanism maps for the hollow pyramidal core of a sandwich panel under transverse shear International Journal of Solids and Structures. 48: 3417-3430. DOI: 10.1016/J.Ijsolstr.2011.08.004 |
0.548 |
|
2011 |
Nachum S, Fleck NA. The microstructure and mechanical properties of ball-milled stainless steel powder: The effect of hot-pressing vs. laser sintering Acta Materialia. 59: 7300-7310. DOI: 10.1016/J.Actamat.2011.08.004 |
0.333 |
|
2011 |
Tagarielli VL, Fleck NA, Colella A, Matteazzi P. Mechanical properties and deformation mechanisms of nanocrystalline Fe/Cu 60/40 composites Journal of Materials Science. 46: 385-393. DOI: 10.1007/S10853-010-4848-Y |
0.67 |
|
2010 |
Quintana-Alonso I, Fleck NA. Damage Tolerance of a Sandwich Panel Containing a Cracked Square Lattice Core Journal of Sandwich Structures and Materials. 12: 139-158. DOI: 10.1177/1099636209104535 |
0.43 |
|
2010 |
Fleck NA, Deshpande VS, Ashby MF. Micro-architectured materials: Past, present and future Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 466: 2495-2516. DOI: 10.1098/Rspa.2010.0215 |
0.486 |
|
2010 |
Idiart MI, Fleck NA. Size effects in the torsion of thin metal wires Modelling and Simulation in Materials Science and Engineering. 18: 15009. DOI: 10.1088/0965-0393/18/1/015009 |
0.37 |
|
2010 |
Fleck NA, Zisis T. The erosion of EB-PVD thermal barrier coatings: The competition between mechanisms Wear. 268: 1214-1224. DOI: 10.1016/J.Wear.2009.12.020 |
0.34 |
|
2010 |
Zisis T, Fleck NA. The elastic-plastic indentation response of a columnar thermal barrier coating Wear. 268: 443-454. DOI: 10.1016/J.Wear.2009.08.035 |
0.37 |
|
2010 |
Nachum S, Fleck NA, Ashby MF, Colella A, Matteazzi P. The microstructural basis for the mechanical properties and electrical resistivity of nanocrystalline Cu-Al2O3 Materials Science and Engineering A. 527: 5065-5071. DOI: 10.1016/J.Msea.2010.04.070 |
0.353 |
|
2010 |
Danas K, Deshpande VS, Fleck NA. Compliant interfaces: A mechanism for relaxation of dislocation pile-ups in a sheared single crystal International Journal of Plasticity. 26: 1792-1805. DOI: 10.1016/J.Ijplas.2010.03.008 |
0.533 |
|
2010 |
Rubino V, Deshpande VS, Fleck NA. The three-point bending of Y-frame and corrugated core sandwich beams International Journal of Mechanical Sciences. 52: 485-494. DOI: 10.1016/J.Ijmecsci.2009.11.009 |
0.522 |
|
2010 |
McShane GJ, Deshpande VS, Fleck NA. Underwater blast response of free-standing sandwich plates with metallic lattice cores International Journal of Impact Engineering. 37: 1138-1149. DOI: 10.1016/J.Ijimpeng.2010.05.004 |
0.524 |
|
2010 |
Tagarielli VL, Deshpande VS, Fleck NA. Prediction of the dynamic response of composite sandwich beams under shock loading International Journal of Impact Engineering. 37: 854-864. DOI: 10.1016/J.Ijimpeng.2009.11.008 |
0.75 |
|
2010 |
Cocks ACF, Fleck NA. Constrained sintering of an air-plasma-sprayed thermal barrier coating Acta Materialia. 58: 4233-4244. DOI: 10.1016/J.Actamat.2010.04.015 |
0.314 |
|
2010 |
Quintana-Alonso I, Mai SP, Fleck NA, Oakes DCH, Twigg MV. The fracture toughness of a cordierite square lattice Acta Materialia. 58: 201-207. DOI: 10.1016/J.Actamat.2009.08.069 |
0.358 |
|
2009 |
Pane I, Fleck N, Chu D, Huber J. Mechanical Constraint and Loading on Ferroelectric Memory Capacitors Mrs Proceedings. 1160. DOI: 10.1557/Proc-1160-H08-03 |
0.315 |
|
2009 |
Côté F, Russell BP, Deshpande VS, Fleck NA. The through-thickness compressive strength of a composite sandwich panel with a hierarchical square honeycomb sandwich core Journal of Applied Mechanics, Transactions Asme. 76: 1-8. DOI: 10.1115/1.3086436 |
0.568 |
|
2009 |
Alonso IQ, Fleck NA. The Damage Tolerance of a Sandwich Panel Containing a Cracked Honeycomb Core Journal of Applied Mechanics. 76: 61003. DOI: 10.1115/1.2912995 |
0.384 |
|
2009 |
Mai SP, Fleck NA. Reticulated tubes: Effective elastic properties and actuation response Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 465: 685-708. DOI: 10.1098/Rspa.2008.0328 |
0.371 |
|
2009 |
Zhu H, Chu DP, Fleck NA, Rowley SE, Saxena SS. Polarization change in ferroelectric thin film capacitors under external stress Journal of Applied Physics. 105. DOI: 10.1063/1.3089303 |
0.307 |
|
2009 |
Alonso IQ, Fleck NA. Compressive response of a sandwich plate containing a cracked diamond-celled lattice Journal of the Mechanics and Physics of Solids. 57: 1545-1567. DOI: 10.1016/J.Jmps.2009.05.008 |
0.4 |
|
2009 |
Fleck NA, Cocks ACF. A multi-scale constitutive model for the sintering of an air-plasma-sprayed thermal barrier coating, and its response under hot isostatic pressing Journal of the Mechanics and Physics of Solids. 57: 689-705. DOI: 10.1016/J.Jmps.2009.01.001 |
0.343 |
|
2009 |
Fleck NA, Willis JR. A mathematical basis for strain-gradient plasticity theory. Part II: Tensorial plastic multiplier Journal of the Mechanics and Physics of Solids. 57: 161-177. DOI: 10.1016/J.Jmps.2008.09.010 |
0.353 |
|
2009 |
Liu QD, Fleck NA, Huber JE, Chu DP. Birefringence measurements of creep near an electrode tip in transparent PLZT Journal of the European Ceramic Society. 29: 2289-2296. DOI: 10.1016/J.Jeurceramsoc.2009.01.008 |
0.305 |
|
2009 |
Tilbrook MT, Deshpande VS, Fleck NA. Underwater blast loading of sandwich beams: Regimes of behaviour International Journal of Solids and Structures. 46: 3209-3221. DOI: 10.1016/J.Ijsolstr.2009.04.012 |
0.546 |
|
2009 |
Idiart MI, Deshpande VS, Fleck NA, Willis JR. Size effects in the bending of thin foils International Journal of Engineering Science. 47: 1251-1264. DOI: 10.1016/J.Ijengsci.2009.06.002 |
0.521 |
|
2009 |
Rubino V, Deshpande VS, Fleck NA. The dynamic response of clamped rectangular Y-frame and corrugated core sandwich plates European Journal of Mechanics, a/Solids. 28: 14-24. DOI: 10.1016/J.Euromechsol.2008.06.001 |
0.546 |
|
2008 |
Symons DD, Fleck NA. The Imperfection Sensitivity of Isotropic Two-Dimensional Elastic Lattices Journal of Applied Mechanics. 75: 51011. DOI: 10.1115/1.2913044 |
0.411 |
|
2008 |
Idiart MI, Fleck N. The effect of interfaces on the plastic behavior of periodic composites Philosophical Magazine. 88: 3633-3653. DOI: 10.1080/14786430802023028 |
0.382 |
|
2008 |
McShane GJ, Stewart C, Aronson MT, Wadley HNG, Fleck NA, Deshpande VS. Dynamic rupture of polymer-metal bilayer plates International Journal of Solids and Structures. 45: 4407-4426. DOI: 10.1016/J.Ijsolstr.2008.03.017 |
0.519 |
|
2008 |
McMeeking RM, Spuskanyuk AV, He MY, Deshpande VS, Fleck NA, Evans AG. An analytic model for the response to water blast of unsupported metallic sandwich panels International Journal of Solids and Structures. 45: 478-496. DOI: 10.1016/J.Ijsolstr.2007.08.003 |
0.494 |
|
2008 |
Rubino V, Deshpande VS, Fleck NA. The collapse response of sandwich beams with a Y-frame core subjected to distributed and local loading International Journal of Mechanical Sciences. 50: 233-246. DOI: 10.1016/J.Ijmecsci.2007.07.007 |
0.583 |
|
2008 |
Rubino V, Deshpande VS, Fleck NA. The dynamic response of end-clamped sandwich beams with a Y-frame or corrugated core International Journal of Impact Engineering. 35: 829-844. DOI: 10.1016/J.Ijimpeng.2007.10.006 |
0.52 |
|
2008 |
Tagarielli VL, Deshpande VS, Fleck NA. The high strain rate response of PVC foams and end-grain balsa wood Composites Part B: Engineering. 39: 83-91. DOI: 10.1016/J.Compositesb.2007.02.005 |
0.719 |
|
2007 |
Zisis A, Fleck NA. Mechanisms of elastodynamic erosion of electron-beam thermal barrier coatings International Journal of Materials Research. 98: 1196-1202. DOI: 10.3139/146.101582 |
0.347 |
|
2007 |
Kazemahvazi S, Radford D, Deshpande VS, Fleck NA. Dynamic failure of clamped circular plates subjected to an underwater shock Journal of Mechanics of Materials and Structures. 2: 2007-2023. DOI: 10.2140/Jomms.2007.2.2007 |
0.487 |
|
2007 |
Radford DD, McShane GJ, Deshpande VS, Fleck NA. Dynamic compressive response of stainless-steel square honeycombs Journal of Applied Mechanics, Transactions Asme. 74: 658-667. DOI: 10.1115/1.2424717 |
0.527 |
|
2007 |
McShane GJ, Deshpande VS, Fleck NA. The Underwater Blast Resistance of Metallic Sandwich Beams With Prismatic Lattice Cores Journal of Applied Mechanics. 74: 352-364. DOI: 10.1115/1.2198549 |
0.496 |
|
2007 |
Borg U, Fleck NA. Strain gradient effects in surface roughening Modelling and Simulation in Materials Science and Engineering. 15. DOI: 10.1088/0965-0393/15/1/S01 |
0.357 |
|
2007 |
Zhu H, Chu DP, Fleck NA, Pane I, Huber JE, Natori E. Polarization change of PZTN ferroelectric thin films under uniform in-plane tensile stress Integrated Ferroelectrics. 95: 117-127. DOI: 10.1080/10584580701756532 |
0.318 |
|
2007 |
Côté F, Deshpande VS, Fleck NA. Shear fatigue strength of a prismatic diamond sandwich core Scripta Materialia. 56: 585-588. DOI: 10.1016/J.Scriptamat.2006.12.035 |
0.543 |
|
2007 |
Alonso IQ, Fleck NA. Damage tolerance of an elastic-brittle diamond-celled honeycomb Scripta Materialia. 56: 693-696. DOI: 10.1016/J.Scriptamat.2006.12.027 |
0.355 |
|
2007 |
Romijn NER, Fleck NA. The fracture toughness of planar lattices: Imperfection sensitivity Journal of the Mechanics and Physics of Solids. 55: 2538-2564. DOI: 10.1016/J.Jmps.2007.04.010 |
0.317 |
|
2007 |
Fleck NA, Qiu X. The damage tolerance of elastic–brittle, two-dimensional isotropic lattices Journal of the Mechanics and Physics of Solids. 55: 562-588. DOI: 10.1016/J.Jmps.2006.08.004 |
0.404 |
|
2007 |
Tilbrook MT, Radford DD, Deshpande VS, Fleck NA. Dynamic crushing of sandwich panels with prismatic lattice cores International Journal of Solids and Structures. 44: 6101-6123. DOI: 10.1016/J.Ijsolstr.2007.02.015 |
0.539 |
|
2007 |
Mai SP, Fleck NA, Lu TJ. Optimal design of box-section sandwich beams in three-point bending International Journal of Solids and Structures. 44: 4742-4769. DOI: 10.1016/J.Ijsolstr.2006.11.046 |
0.356 |
|
2007 |
Tagarielli VL, Deshpande VS, Fleck NA. The dynamic response of composite sandwich beams to transverse impact International Journal of Solids and Structures. 44: 2442-2457. DOI: 10.1016/J.Ijsolstr.2006.07.015 |
0.73 |
|
2007 |
Côté F, Fleck NA, Deshpande VS. Fatigue performance of sandwich beams with a pyramidal core International Journal of Fatigue. 29: 1402-1412. DOI: 10.1016/J.Ijfatigue.2006.11.013 |
0.551 |
|
2006 |
Cote F, Deshpande V, Fleck N. The shear response of metallic square honeycombs Journal of Mechanics of Materials and Structures. 1: 1281-1299. DOI: 10.2140/Jomms.2006.1.1281 |
0.462 |
|
2006 |
Luo JK, Pritschow M, Flewitt AJ, Spearing SM, Fleck NA, Milne WI. Effects of Process Conditions on Properties of Electroplated Ni Thin Films for Microsystem Applications Journal of the Electrochemical Society. 153. DOI: 10.1149/1.2223302 |
0.356 |
|
2006 |
Deshpande VS, Heaver A, Fleck NA. An underwater shock simulator Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 462: 1021-1041. DOI: 10.1098/Rspa.2005.1604 |
0.493 |
|
2006 |
Evans AG, Fleck NA, Faulhaber S, Vermaak N, Maloney M, Darolia R. Scaling laws governing the erosion and impact resistance of thermal barrier coatings Wear. 260: 886-894. DOI: 10.1016/J.Wear.2005.05.005 |
0.348 |
|
2006 |
Tilbrook MT, Deshpande VS, Fleck NA. The impulsive response of sandwich beams: analytical and numerical investigation of regimes of behaviour Journal of the Mechanics and Physics of Solids. 54: 2242-2280. DOI: 10.1016/J.Jmps.2006.07.001 |
0.548 |
|
2006 |
Hutchinson RG, Fleck NA. The structural performance of the periodic truss Journal of the Mechanics and Physics of Solids. 54: 756-782. DOI: 10.1016/J.Jmps.2005.10.008 |
0.314 |
|
2006 |
Shieh J, Huber JE, Fleck NA. Fatigue crack growth in ferroelectrics under electrical loading Journal of the European Ceramic Society. 26: 95-109. DOI: 10.1016/J.Jeurceramsoc.2004.10.002 |
0.307 |
|
2006 |
Côté F, Deshpande VS, Fleck NA, Evans AG. The compressive and shear responses of corrugated and diamond lattice materials International Journal of Solids and Structures. 43: 6220-6242. DOI: 10.1016/J.Ijsolstr.2005.07.045 |
0.57 |
|
2006 |
Radford DD, McShane GJ, Deshpande VS, Fleck NA. The response of clamped sandwich plates with metallic foam cores to simulated blast loading International Journal of Solids and Structures. 43: 2243-2259. DOI: 10.1016/J.Ijsolstr.2005.07.006 |
0.529 |
|
2006 |
Rathbun HJ, Radford DD, Xue Z, He MY, Yang J, Deshpande V, Fleck NA, Hutchinson JW, Zok FW, Evans AG. Performance of metallic honeycomb-core sandwich beams under shock loading International Journal of Solids and Structures. 43: 1746-1763. DOI: 10.1016/J.Ijsolstr.2005.06.079 |
0.647 |
|
2006 |
Borg U, Niordson CF, Fleck NA, Tvergaard V. A viscoplastic strain gradient analysis of materials with voids or inclusions International Journal of Solids and Structures. 43: 4906-4916. DOI: 10.1016/J.Ijsolstr.2005.05.022 |
0.396 |
|
2006 |
Steeves CA, Fleck NA. In-plane properties of composite laminates with through-thickness pin reinforcement International Journal of Solids and Structures. 43: 3197-3212. DOI: 10.1016/J.Ijsolstr.2005.05.017 |
0.375 |
|
2006 |
Akisanya AR, Fleck NA. Plastic collapse of thin-walled frusta and egg-box material under shear and normal loading International Journal of Mechanical Sciences. 48: 799-808. DOI: 10.1016/J.Ijmecsci.2006.01.020 |
0.438 |
|
2006 |
Shergold OA, Fleck NA, Radford D. The uniaxial stress versus strain response of pig skin and silicone rubber at low and high strain rates International Journal of Impact Engineering. 32: 1384-1402. DOI: 10.1016/J.Ijimpeng.2004.11.010 |
0.349 |
|
2006 |
Radford DD, Fleck NA, Deshpande VS. The response of clamped sandwich beams subjected to shock loading International Journal of Impact Engineering. 32: 968-987. DOI: 10.1016/J.Ijimpeng.2004.08.007 |
0.523 |
|
2006 |
McShane GJ, Radford DD, Deshpande VS, Fleck NA. The response of clamped sandwich plates with lattice cores subjected to shock loading European Journal of Mechanics a-Solids. 25: 215-229. DOI: 10.1016/J.Euromechsol.2005.08.001 |
0.537 |
|
2006 |
Pedersen CBW, Deshpande VS, Fleck NA. Compressive response of the Y-shaped sandwich core European Journal of Mechanics a-Solids. 25: 125-141. DOI: 10.1016/J.Euromechsol.2005.06.001 |
0.559 |
|
2006 |
Hutchinson RG, Fleck NA, Cocks ACF. A sintering model for thermal barrier coatings Acta Materialia. 54: 1297-1306. DOI: 10.1016/J.Actamat.2005.10.056 |
0.332 |
|
2005 |
Shergold OA, Fleck NA. Experimental investigation into the deep penetration of soft solids by sharp and blunt punches, with application to the piercing of skin. Journal of Biomechanical Engineering. 127: 838-48. PMID 16248314 DOI: 10.1115/1.1992528 |
0.35 |
|
2005 |
Luo JK, Chu DP, Flewitt AJ, Spearing SM, Fleck NA, Milne WI. Uniformity control of Ni thin film microstructures deposited by through-mask plating Journal of the Electrochemical Society. 152. DOI: 10.1149/1.1833320 |
0.317 |
|
2005 |
Luo JK, Fu YQ, Flewitt AJ, Spearing SM, Fleck NA, Milne WI. Large displacement spring-like electro-mechanical thermal actuators with insulator constraint beams Proceedings of Spie. 5836: 67-77. DOI: 10.1117/12.608299 |
0.33 |
|
2005 |
Fleck NA, Deshpande VS. Closure to “Discussion of ‘The Resistance of Clamped Sandwich Beams to Shock Loading’ ” (2005, ASME J. Appl. Mech., 72, pp.) Journal of Applied Mechanics. 72: 980-980. DOI: 10.1115/1.2040450 |
0.463 |
|
2005 |
Tagarielli VL, Fleck NA. A Comparison of the Structural Response of Clamped and Simply Supported Sandwich Beams With Aluminium Faces and a Metal Foam Core Journal of Applied Mechanics. 72: 408-417. DOI: 10.1115/1.1875432 |
0.703 |
|
2005 |
Luo JK, Flewitt AJ, Spearing SM, Fleck NA, Milne WI. Three types of planar structure microspring electro-thermal actuators with insulating beam constraints Journal of Micromechanics and Microengineering. 15: 1527-1535. DOI: 10.1088/0960-1317/15/8/022 |
0.326 |
|
2005 |
Luo J, He J, Fu YQ, Flewitt A, Spearing SM, Fleck N, Milne W. Fabrication and characterization of diamond-like carbon/Ni bimorph normally closed microcages Journal of Micromechanics and Microengineering. 15: 1406-1413. DOI: 10.1088/0960-1317/15/8/005 |
0.312 |
|
2005 |
Luo JK, Flewitt AJ, Spearing SM, Fleck NA, Milne WI. Comparison of microtweezers based on three lateral thermal actuator configurations Journal of Micromechanics and Microengineering. 15: 1294-1302. DOI: 10.1088/0960-1317/15/6/022 |
0.3 |
|
2005 |
Zhu H, Fleck NA, Cocks ACF, Evans AG. Numerical simulations of crack formation from pegs in thermal barrier systems with NiCoCrAlY bond coats Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 404: 26-32. DOI: 10.1016/J.Msea.2005.05.033 |
0.351 |
|
2005 |
Deshpande VS, Fleck NA. One-dimensional response of sandwich plates to underwater shock loading Journal of the Mechanics and Physics of Solids. 53: 2347-2383. DOI: 10.1016/J.Jmps.2005.06.006 |
0.563 |
|
2005 |
Symons DD, Hutchinson RG, Fleck NA. Actuation of the Kagome Double-Layer Grid. Part 1: Prediction of performance of the perfect structure Journal of the Mechanics and Physics of Solids. 53: 1855-1874. DOI: 10.1016/J.Jmps.2005.02.011 |
0.335 |
|
2005 |
Symons DD, Shieh J, Fleck NA. Actuation of the Kagome Double-Layer Grid. Part 2: Effect of imperfections on the measured and predicted actuation stiffness Journal of the Mechanics and Physics of Solids. 53: 1875-1891. DOI: 10.1016/J.Jmps.2005.02.008 |
0.332 |
|
2005 |
Qiu X, Deshpande VS, Fleck NA. Impulsive loading of clamped monolithic and sandwich beams over a central patch Journal of the Mechanics and Physics of Solids. 53: 1015-1046. DOI: 10.1016/J.Jmps.2004.12.004 |
0.53 |
|
2005 |
Tagarielli V, Deshpande V, Fleck N, Chen C. A constitutive model for transversely isotropic foams, and its application to the indentation of balsa wood International Journal of Mechanical Sciences. 47: 666-686. DOI: 10.1016/J.Ijmecsci.2004.11.010 |
0.734 |
|
2005 |
Radford DD, Deshpande VS, Fleck NA. The use of metal foam projectiles to simulate shock loading on a structure International Journal of Impact Engineering. 31: 1152-1171. DOI: 10.1016/J.Ijimpeng.2004.07.012 |
0.488 |
|
2005 |
Steeves CA, Fleck NA. Compressive strength of composite laminates with terminated internal plies Composites Part a-Applied Science and Manufacturing. 36: 798-805. DOI: 10.1016/J.Compositesa.2004.10.024 |
0.379 |
|
2005 |
Sridhar I, Fleck NA. The multiaxial yield behaviour of an aluminium alloy foam Journal of Materials Science. 40: 4005-4008. DOI: 10.1007/S10853-005-1916-9 |
0.366 |
|
2005 |
Hutchinson RG, Fleck NA. Microarchitectured cellular solids – the hunt for statically determinate periodic trusses Zamm-Zeitschrift Fur Angewandte Mathematik Und Mechanik. 85: 607-617. DOI: 10.1002/Zamm.200410208 |
0.346 |
|
2004 |
Qiu X, Deshpande VS, Fleck NA. Dynamic Response of a Clamped Circular Sandwich Plate Subject to Shock Loading Journal of Applied Mechanics. 71: 637-645. DOI: 10.1115/1.1778416 |
0.546 |
|
2004 |
Fleck NA, Deshpande VS. The Resistance of Clamped Sandwich Beams to Shock Loading Journal of Applied Mechanics. 71: 386-401. DOI: 10.1115/1.1629109 |
0.506 |
|
2004 |
Luo JK, Flewitt AJ, Spearing SM, Fleck NA, Milne WI. Normally closed microgrippers using a highly stressed diamond-like carbon and Ni bimorph structure Applied Physics Letters. 85: 5748-5750. DOI: 10.1063/1.1833555 |
0.303 |
|
2004 |
Chen X, He MY, Spitsberg I, Fleck NA, Hutchinson JW, Evans AG. Mechanisms governing the high temperature erosion of thermal barrier coatings Wear. 256: 735-746. DOI: 10.1016/S0043-1648(03)00446-0 |
0.56 |
|
2004 |
Steeves CA, Fleck NA. Material selection in sandwich beam construction Scripta Materialia. 50: 1335-1339. DOI: 10.1016/J.Scriptamat.2004.02.015 |
0.374 |
|
2004 |
Côté F, Deshpande VS, Fleck NA, Evans AG. The out-of-plane compressive behavior of metallic honeycombs Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 380: 272-280. DOI: 10.1016/J.Msea.2004.03.051 |
0.536 |
|
2004 |
Fleck NA, Willis JR. Bounds and estimates for the effect of strain gradients upon the effective plastic properties of an isotropic two-phase composite Journal of the Mechanics and Physics of Solids. 52: 1855-1888. DOI: 10.1016/J.Jmps.2004.02.001 |
0.361 |
|
2004 |
Liu D, Fleck NA, Sutcliffe MPF. Compressive strength of fibre composites with random fibre waviness Journal of the Mechanics and Physics of Solids. 52: 1481-1505. DOI: 10.1016/J.Jmps.2004.01.005 |
0.379 |
|
2004 |
Steeves CA, Fleck NA. Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part II: experimental investigation and numerical modelling International Journal of Mechanical Sciences. 46: 585-608. DOI: 10.1016/J.Ijmecsci.2004.04.004 |
0.42 |
|
2004 |
Steeves CA, Fleck NA. Collapse mechanisms of sandwich beams with composite faces and a foam core, loaded in three-point bending. Part I: analytical models and minimum weight design International Journal of Mechanical Sciences. 46: 561-583. DOI: 10.1016/J.Ijmecsci.2004.04.003 |
0.406 |
|
2004 |
Zupan M, Deshpande VS, Fleck NA. The out-of-plane compressive behaviour of woven-core sandwich plates European Journal of Mechanics a-Solids. 23: 411-421. DOI: 10.1016/J.Euromechsol.2004.01.007 |
0.478 |
|
2004 |
Huber JE, Fleck NA. Ferroelectric switching: A micromechanics model versus measured behaviour European Journal of Mechanics, a/Solids. 23: 203-217. DOI: 10.1016/J.Euromechsol.2003.11.006 |
0.34 |
|
2004 |
Tagarielli VL, Fleck NA, Deshpande VS. Collapse of clamped and simply supported composite sandwich beams in three-point bending Composites Part B-Engineering. 35: 523-534. DOI: 10.1016/J.Compositesb.2003.07.001 |
0.734 |
|
2004 |
Cartié DDR, Cox BN, Fleck NA. Mechanisms of crack bridging by composite and metallic rods Composites Part a-Applied Science and Manufacturing. 35: 1325-1336. DOI: 10.1016/J.Compositesa.2004.03.006 |
0.385 |
|
2004 |
Davy CA, Bolton MD, Fleck NA. The shearing behaviour of a sugar aggregate Acta Materialia. 52: 3587-3601. DOI: 10.1016/J.Actamat.2004.04.011 |
0.351 |
|
2004 |
Tagarielli VL, Fleck NA, Deshpande VS. The Collapse Response of Sandwich Beams with Aluminium Face Sheets and a Metal Foam Core Advanced Engineering Materials. 6: 440-443. DOI: 10.1002/Adem.200405154 |
0.725 |
|
2003 |
Chen C, Fleck NA, Shen YP. Experimental and Micromechanical Study of Size Effects in the Constrained Deformation of Metallic Foams Key Engineering Materials. 421-426. DOI: 10.4028/Www.Scientific.Net/Kem.243-244.421 |
0.387 |
|
2003 |
Fleck N, Ashby M, Hutchinson J. The role of geometrically necessary dislocations in giving material strengthening Scripta Materialia. 48: 179-183. DOI: 10.1016/S1359-6462(02)00338-X |
0.501 |
|
2003 |
Shieh J, Huber JE, Fleck NA. An evaluation of switching criteria for ferroelectrics under stress and electric field Acta Materialia. 51: 6123-6137. DOI: 10.1016/S1359-6454(03)00432-4 |
0.306 |
|
2003 |
Cartié DD, Fleck NA. The effect of pin reinforcement upon the through-thickness compressive strength of foam-cored sandwich panels Composites Science and Technology. 63: 2401-2409. DOI: 10.1016/S0266-3538(03)00273-2 |
0.435 |
|
2003 |
Wadley HNG, Fleck NA, Evans AG. Fabrication and structural performance of periodic cellular metal sandwich structures Composites Science and Technology. 63: 2331-2343. DOI: 10.1016/S0266-3538(03)00266-5 |
0.341 |
|
2003 |
Deshpande VS, Fleck NA. Energy absorption of an egg-box material Journal of the Mechanics and Physics of Solids. 51: 187-208. DOI: 10.1016/S0022-5096(02)00052-2 |
0.516 |
|
2003 |
Hutchinson RG, Wicks N, Evans AG, Fleck NA, Hutchinson JW. Kagome plate structures for actuation International Journal of Solids and Structures. 40: 6969-6980. DOI: 10.1016/S0020-7683(03)00348-2 |
0.535 |
|
2003 |
Zupan M, Chen C, Fleck NA. The plastic collapse and energy absorption capacity of egg-box panels International Journal of Mechanical Sciences. 45: 851-871. DOI: 10.1016/S0020-7403(03)00136-X |
0.394 |
|
2003 |
Qiu X, Deshpande VS, Fleck NA. Finite element analysis of the dynamic response of clamped sandwich beams subject to shock loading European Journal of Mechanics a-Solids. 22: 801-814. DOI: 10.1016/J.Euromechsol.2003.09.002 |
0.558 |
|
2002 |
Fleck NA, Sridhar I. End compression of sandwich columns Composites Part a-Applied Science and Manufacturing. 33: 353-359. DOI: 10.1016/S1359-835X(01)00118-X |
0.411 |
|
2002 |
Ashby MF, Evans A, Fleck NA, Gibson LJ, Hutchinson JW, Wadley HNG. Metal foams: a design guide - Butterworth-Heinemann, Oxford, UK, ISBN 0-7506-7219-6, Published 2000, Hardback, 251 pp., $75.00 Materials & Design. 23: 119. DOI: 10.1016/S0261-3069(01)00049-8 |
0.458 |
|
2002 |
Chen C, Fleck NA. Size effects in the constrained deformation of metallic foams Journal of the Mechanics and Physics of Solids. 50: 955-977. DOI: 10.1016/S0022-5096(01)00128-4 |
0.419 |
|
2002 |
Bart-Smith H, Hutchinson JW, Fleck NA, Evans AG. Influence of imperfections on the performance of metal foam core sandwich panels International Journal of Solids and Structures. 39: 4999-5012. DOI: 10.1016/S0020-7683(02)00250-0 |
0.603 |
|
2002 |
Chen C, Fleck NA, Ashby MF. Creep response of sandwich beams with a metallic foam core Advanced Engineering Materials. 4: 777-780. DOI: 10.1002/1527-2648(20021014)4:10<777::Aid-Adem777>3.0.Co;2-A |
0.427 |
|
2001 |
Choi S‐, Song B‐, Kang K‐, Fleck NA. Fracture of a ductile layer constrained by stiff substrates Fatigue & Fracture of Engineering Materials & Structures. 24: 1-13. DOI: 10.1046/J.1460-2695.2001.00371.X |
0.321 |
|
2001 |
Schmidt I, Fleck NA. Ductile fracture of two-dimensional cellular structures International Journal of Fracture. 111: 327-342. DOI: 10.1023/A:1012248030212 |
0.367 |
|
2001 |
Deshpande VS, Fleck NA. Multi-axial yield behaviour of polymer foams Acta Materialia. 49: 1859-1866. DOI: 10.1016/S1359-6454(01)00058-1 |
0.547 |
|
2001 |
Deshpande VS, Ashby MF, Fleck NA. Foam Topology Bending Versus Stretching Dominated Architectures Acta Materialia. 49: 1035-1040. DOI: 10.1016/S1359-6454(00)00379-7 |
0.514 |
|
2001 |
Fleck NA, Liu D. Microbuckle initiation from a patch of large amplitude fibre waviness in a composite under compression and bending European Journal of Mechanics a-Solids. 20: 23-37. DOI: 10.1016/S0997-7538(00)01124-4 |
0.434 |
|
2001 |
Harte A-, Fleck NA, Ashby MF. The fatigue strength of sandwich beams with an aluminium alloy foam core International Journal of Fatigue. 23: 499-507. DOI: 10.1016/S0142-1123(01)00012-3 |
0.403 |
|
2001 |
Olurin OB, McCullough KYG, Fleck NA, Ashby MF. Fatigue crack propagation in aluminium alloy foams International Journal of Fatigue. 23: 375-382. DOI: 10.1016/S0142-1123(01)00010-X |
0.326 |
|
2001 |
Evans AG, Hutchinson JW, Fleck NA, Ashby MF, Wadley HNG. The topological design of multifunctional cellular metals Progress in Materials Science. 46: 309-327. DOI: 10.1016/S0079-6425(00)00016-5 |
0.502 |
|
2001 |
Fleck N, Hutchinson J. A reformulation of strain gradient plasticity Journal of the Mechanics and Physics of Solids. 49: 2245-2271. DOI: 10.1016/S0022-5096(01)00049-7 |
0.53 |
|
2001 |
Fleck NA, Olurin OB, Chen C, Ashby MF. The effect of hole size upon the strength of metallic and polymeric foams Journal of the Mechanics and Physics of Solids. 49: 2015-2030. DOI: 10.1016/S0022-5096(01)00033-3 |
0.37 |
|
2001 |
Deshpande VS, Fleck NA, Ashby MF. Effective properties of the octet-truss lattice material Journal of the Mechanics and Physics of Solids. 49: 1747-1769. DOI: 10.1016/S0022-5096(01)00010-2 |
0.519 |
|
2001 |
Shu JY, Fleck NA, Giessen vdE, Needleman A. Boundary layers in constrained plastic flow: comparison of nonlocal and discrete dislocation plasticity Journal of the Mechanics and Physics of Solids. 49: 1361-1395. DOI: 10.1016/S0022-5096(00)00074-0 |
0.397 |
|
2001 |
Huber JE, Fleck NA. Multi-axial electrical switching of a ferroelectric: theory versus experiment Journal of the Mechanics and Physics of Solids. 49: 785-811. DOI: 10.1016/S0022-5096(00)00052-1 |
0.314 |
|
2001 |
Chen C, Fleck NA, Lu TJ. The mode I crack growth resistance of metallic foams Journal of the Mechanics and Physics of Solids. 49: 231-259. DOI: 10.1016/S0022-5096(00)00039-9 |
0.376 |
|
2001 |
Deshpande VS, Fleck NA. Collapse of truss core sandwich beams in 3-point bending International Journal of Solids and Structures. 38: 6275-6305. DOI: 10.1016/S0020-7683(01)00103-2 |
0.533 |
|
2001 |
Chen C, Lu TJ, Fleck NA. Effect of inclusions and holes on the stiffness and strength of honeycombs International Journal of Mechanical Sciences. 43: 487-504. DOI: 10.1016/S0020-7403(99)00122-8 |
0.408 |
|
2001 |
Chen C, Harte A, Fleck NA. The plastic collapse of sandwich beams with a metallic foam core International Journal of Mechanical Sciences. 43: 1483-1506. DOI: 10.1016/S0020-7403(00)00069-2 |
0.446 |
|
2001 |
Sridhar I, Fleck NA, Akisanya AR. Cold compaction of an array of cylindrical fibres International Journal of Mechanical Sciences. 43: 715-742. DOI: 10.1016/S0020-7403(00)00037-0 |
0.357 |
|
2001 |
Olurin OB, Fleck NA, Ashby MF. Tensile and compressive failure of notched cellular foams Advanced Engineering Materials. 3: 55-58. DOI: 10.1002/1527-2648(200101)3:1/2<55::Aid-Adem55>3.0.Co;2-2 |
0.356 |
|
2000 |
Olurin OB, Fleck NA, Ashby MF. Joining of aluminium foams with fasteners and adhesives Journal of Materials Science. 35: 1079-1085. DOI: 10.1023/A:1004735011463 |
0.338 |
|
2000 |
Harte A-, Fleck NA. Deformation and failure mechanisms of braided composite tubes in compression and torsion Acta Materialia. 48: 1259-1271. DOI: 10.1016/S1359-6454(99)00427-9 |
0.427 |
|
2000 |
Sridhar I, Fleck NA. Yield Behaviour Of Cold Compacted Composite Powders Acta Materialia. 48: 3341-3352. DOI: 10.1016/S1359-6454(00)00151-8 |
0.406 |
|
2000 |
Harte A, Fleck NA. On the mechanics of braided composites in tension European Journal of Mechanics a-Solids. 19: 259-275. DOI: 10.1016/S0997-7538(99)00164-3 |
0.405 |
|
2000 |
Harte A, Fleck NA, Ashby MF. Energy absorption of foam-filled circular tubes with braided composite walls European Journal of Mechanics a-Solids. 19: 31-50. DOI: 10.1016/S0997-7538(00)00158-3 |
0.319 |
|
2000 |
Olurin OB, Fleck NA, Ashby MF. Deformation and fracture of aluminium foams Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 291: 136-146. DOI: 10.1016/S0921-5093(00)00954-0 |
0.384 |
|
2000 |
Deshpande V, Fleck NA. High strain rate compressive behaviour of aluminium alloy foams International Journal of Impact Engineering. 24: 277-298. DOI: 10.1016/S0734-743X(99)00153-0 |
0.496 |
|
2000 |
Fleck NA, Zhao LG. Microbuckle tunnelling in fibre composites Journal of the Mechanics and Physics of Solids. 48: 1865-1891. DOI: 10.1016/S0022-5096(99)00097-6 |
0.395 |
|
2000 |
Deshpande VS, Fleck NA. Isotropic constitutive models for metallic foams Journal of the Mechanics and Physics of Solids. 48: 1253-1283. DOI: 10.1016/S0022-5096(99)00082-4 |
0.501 |
|
2000 |
Zhao LG, Lu TJ, Fleck NA. Crack channelling and spalling in a plate due to thermal shock loading Journal of the Mechanics and Physics of Solids. 48: 867-897. DOI: 10.1016/S0022-5096(99)00064-2 |
0.367 |
|
2000 |
Mesarovic SD, Fleck NA. Frictionless indentation of dissimilar elastic-plastic spheres International Journal of Solids and Structures. 37: 7071-7091. DOI: 10.1016/S0020-7683(99)00328-5 |
0.406 |
|
2000 |
Fleck NA, Liu D, Shu JY. Microbuckle initiation from a hole and from the free edge of a fibre composite International Journal of Solids and Structures. 37: 2757-2775. DOI: 10.1016/S0020-7683(99)00041-4 |
0.398 |
|
2000 |
Schmidt I, Fleck NA. Ductile fracture of honeycombs Zamm-Zeitschrift Fur Angewandte Mathematik Und Mechanik. 80: 497-498. DOI: 10.1002/Zamm.200008014119 |
0.387 |
|
2000 |
Harte A, Fleck NA, Ashby MF. Sandwich Panel Design Using Aluminum Alloy Foam Advanced Engineering Materials. 2: 219-222. DOI: 10.1002/(Sici)1527-2648(200004)2:4<219::Aid-Adem219>3.0.Co;2-# |
0.384 |
|
1999 |
Mesarovic SD, Fleck NA. Spherical indentation of elastic–plastic solids Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 455: 2707-2728. DOI: 10.1098/Rspa.1999.0423 |
0.366 |
|
1999 |
McCullough KYG, Fleck NA, Ashby MF. Uniaxial stress–strain behaviour of aluminium alloy foams Acta Materialia. 47: 2323-2330. DOI: 10.1016/S1359-6454(99)00128-7 |
0.376 |
|
1999 |
McCullough KYG, Fleck NA, Ashby MF. Toughness Of Aluminium Alloy Foams Acta Materialia. 47: 2331-2343. DOI: 10.1016/S1359-6454(99)00125-1 |
0.369 |
|
1999 |
Harte A-, Fleck NA, Ashby MF. Fatigue failure of an open cell and a closed cell aluminium alloy foam Acta Materialia. 47: 2511-2524. DOI: 10.1016/S1359-6454(99)00097-X |
0.38 |
|
1999 |
Sugimura Y, Rabiei A, Evans AG, Harte AM, Fleck NA. Compression fatigue of a cellular Al alloy Materials Science and Engineering A. 269: 38-48. DOI: 10.1016/S0921-5093(99)00147-1 |
0.358 |
|
1999 |
Chen C, Lu TJ, Fleck NA. Effect of imperfections on the yielding of two-dimensional foams Journal of the Mechanics and Physics of Solids. 47: 2235-2272. DOI: 10.1016/S0022-5096(99)00030-7 |
0.352 |
|
1999 |
Shu JY, Fleck NA. Strain gradient crystal plasticity: size-dependentdeformation of bicrystals Journal of the Mechanics and Physics of Solids. 47: 297-324. DOI: 10.1016/S0022-5096(98)00081-7 |
0.357 |
|
1999 |
Storåkers B, Fleck N., McMeeking R. The viscoplastic compaction of composite powders Journal of the Mechanics and Physics of Solids. 47: 785-815. DOI: 10.1016/S0022-5096(98)00076-3 |
0.367 |
|
1999 |
Liu D, Fleck NA. Scale effects in the initiation of cracking of a scarf joint International Journal of Fracture. 95: 67-88. DOI: 10.1007/978-94-011-4659-3_5 |
0.368 |
|
1999 |
Shu JY, King WE, Fleck NA. Finite Elements For Materials With Strain Gradient Effects International Journal For Numerical Methods in Engineering. 44: 373-391. DOI: 10.1002/(Sici)1097-0207(19990130)44:3<373::Aid-Nme508>3.0.Co;2-7 |
0.315 |
|
1998 |
Hwang SC, Huber JE, McMeeking RM, Fleck NA. The simulation of switching in polycrystalline ferroelectric ceramics Journal of Applied Physics. 84: 1530-1540. DOI: 10.1063/1.368219 |
0.301 |
|
1998 |
Lu TJ, Fleck NA. The thermal shock resistance of solids Acta Materialia. 46: 4755-4768. DOI: 10.1016/S1359-6454(98)00127-X |
0.386 |
|
1998 |
Budiansky B, Fleck NA, Amazigo JC. On kink-band propagation in fiber composites Journal of the Mechanics and Physics of Solids. 46: 1637-1653. DOI: 10.1016/S0022-5096(97)00042-2 |
0.33 |
|
1998 |
Shu JY, Fleck NA. The prediction of a size effect in microindentation International Journal of Solids and Structures. 35: 1363-1383. DOI: 10.1016/S0020-7683(97)00112-1 |
0.367 |
|
1997 |
Durban D, Fleck NA. Spherical Cavity Expansion in a Drucker-Prager Solid Journal of Applied Mechanics. 64: 743-750. DOI: 10.1115/1.2788978 |
0.357 |
|
1997 |
Shu JY, Fleck NA. Microbuckle initiation in fibre composites under multiaxial loading Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 453: 2063-2083. DOI: 10.1098/Rspa.1997.0111 |
0.405 |
|
1997 |
Sridhar I, Johnson KL, Fleck NA. Adhesion mechanics of the surface force apparatus Journal of Physics D. 30: 1710-1719. DOI: 10.1088/0022-3727/30/12/004 |
0.308 |
|
1997 |
Siegmund T, Fleck N, Needleman A. International Journal of Fracture. 85: 381-402. DOI: 10.1023/A:1007460509387 |
0.365 |
|
1997 |
Redanz P, Fleck NA, McMeeking RM. International Journal of Fracture. 88: 187-202. DOI: 10.1023/A:1007453228249 |
0.441 |
|
1997 |
Sutcliffe MPF, Fleck NA. Microbuckle propagation in fibre composites Acta Materialia. 45: 921-932. DOI: 10.1016/S1359-6454(96)00240-6 |
0.429 |
|
1997 |
Fleck NA, Hutchinson JW. Strain gradient plasticity Advances in Applied Mechanics. 33: 295-361. DOI: 10.1016/S0065-2156(08)70388-0 |
0.511 |
|
1997 |
Akisanya AR, Fleck NA. Interfacial cracking from the freeedge of a long bi-material strip International Journal of Solids and Structures. 34: 1645-1665. DOI: 10.1016/S0020-7683(96)00053-4 |
0.355 |
|
1997 |
Akisanya AR, Cocks ACF, Fleck NA. The yield behaviour of metal powders International Journal of Mechanical Sciences. 39: 1315-1324. DOI: 10.1016/S0020-7403(97)00018-0 |
0.343 |
|
1996 |
Sutcliffe MPF, Fleck NA, Xin XJ. Prediction of compressive toughness for fibre composites Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 452: 2443-2465. DOI: 10.1098/Rspa.1996.0131 |
0.387 |
|
1996 |
Fleck NA, Sutcliffe MPF, Sivashanker S, Xin XJ. Compressive R-curve of a carbon fibre-epoxy matrix composite Composites Part B-Engineering. 27: 531-541. DOI: 10.1016/1359-8368(95)00037-2 |
0.4 |
|
1996 |
Poole WJ, Ashby MF, Fleck NA. Micro-hardness of annealed and work-hardened copper polycrystals Scripta Materialia. 34: 559-564. DOI: 10.1016/1359-6462(95)00524-2 |
0.353 |
|
1996 |
Sivashanker S, Fleck NA, Sutcliffe MPF. Microbuckle propagation in a unidirectional carbon fibre-epoxy matrix composite Acta Materialia. 44: 2581-2590. DOI: 10.1016/1359-6454(95)00410-6 |
0.373 |
|
1996 |
Slaughter WS, Fan J, Fleck NA. Dynamic compressive failure of fiber composites Journal of the Mechanics and Physics of Solids. 44: 1867-1890. DOI: 10.1016/0022-5096(96)00050-6 |
0.345 |
|
1996 |
Shaw MC, Clyne TW, Cocks ACF, Fleck NA, Pateras SK. Cracking patterns in metal-ceramic laminates: effects of plasticity Journal of the Mechanics and Physics of Solids. 44: 801-821. DOI: 10.1016/0022-5096(96)00024-5 |
0.347 |
|
1996 |
Smyshlyaev VP, Fleck NA. The role of strain gradients in the grain size effect for polycrystals Journal of the Mechanics and Physics of Solids. 44: 465-495. DOI: 10.1016/0022-5096(96)00009-9 |
0.331 |
|
1996 |
Fleck NA, Kang KJ, Williams JA. The machining of sintered bronze International Journal of Mechanical Sciences. 38: 141-155. DOI: 10.1016/0020-7403(95)00045-Y |
0.302 |
|
1995 |
Fleck N, Jelf P, Curtis P. Compressive Failure of Laminated and Woven Composites Journal of Composites Technology & Research. 17: 212-220. DOI: 10.1520/Ctr10485J |
0.308 |
|
1995 |
Fleck NA, Deng L, Budiansky B. Prediction of kink width in compressed fiber composites Journal of Applied Mechanics, Transactions Asme. 62: 329-337. DOI: 10.1115/1.2895935 |
0.61 |
|
1995 |
Smyshlyaev VP, Fleck NA. Bounds and estimates for the overall plastic behaviour of composites with strain gradient effects Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 451: 795-810. DOI: 10.1098/Rspa.1995.0156 |
0.341 |
|
1995 |
Fleck NA. A crystal plasticity view of powder compaction Acta Metallurgica Et Materialia. 43: 3177-3184. DOI: 10.1016/0956-7151(94)00484-Y |
0.351 |
|
1995 |
Fleck NA, Jelf PM. Deformation and failure of a carbon fibre composite under combined shear and transverse loading Acta Metallurgica Et Materialia. 43: 3001-3007. DOI: 10.1016/0956-7151(94)00481-V |
0.444 |
|
1995 |
Ogbonna N, Fleck NA. Compaction Of An Array Of Spherical-Particles Acta Metallurgica Et Materialia. 43: 603-620. DOI: 10.1016/0956-7151(94)00286-Q |
0.35 |
|
1995 |
Fleck NA, Shu JY. Microbuckle initiation in fibre composites : A finite element study Journal of the Mechanics and Physics of Solids. 43: 1887-1918. DOI: 10.1016/0022-5096(95)00057-P |
0.421 |
|
1995 |
Fleck NA. On the cold compaction of powders Journal of the Mechanics and Physics of Solids. 43: 1409-1431. DOI: 10.1016/0022-5096(95)00039-L |
0.337 |
|
1995 |
Ogbonna N, Fleck NA, Cocks ACF. Transient creep analysis of ball indentation International Journal of Mechanical Sciences. 37: 1179-1202. DOI: 10.1016/0020-7403(95)00016-Q |
0.397 |
|
1994 |
Budiansky B, Fleck NA. Compressive Kinking of Fiber Composites: A Topical Review Applied Mechanics Reviews. 47. DOI: 10.1115/1.3124417 |
0.638 |
|
1994 |
Fleck N, Muller G, Ashby M, Hutchinson J. Strain gradient plasticity: Theory and experiment Acta Metallurgica Et Materialia. 42: 475-487. DOI: 10.1016/0956-7151(94)90502-9 |
0.522 |
|
1994 |
Cox BN, Carter WC, Fleck NA. A binary model of textile composites—I. Formulation Acta Metallurgica Et Materialia. 42: 3463-3479. DOI: 10.1016/0956-7151(94)90479-0 |
0.356 |
|
1994 |
Sutcliffe MPF, Fleck NA. Microbuckle propagation in carbon fibre-epoxy composites Acta Metallurgica Et Materialia. 42: 2219-2231. DOI: 10.1016/0956-7151(94)90301-8 |
0.406 |
|
1994 |
Akisanya AR, Cocks ACF, Fleck NA. Hydrostatic compaction of cylindrical particles Journal of the Mechanics and Physics of Solids. 42: 1067-1085. DOI: 10.1016/0022-5096(94)90060-4 |
0.344 |
|
1994 |
Smyshlyaev VP, Fleck NA. Bounds and estimates for linear composites with strain gradient effects Journal of the Mechanics and Physics of Solids. 42: 1851-1882. DOI: 10.1016/0022-5096(94)90016-7 |
0.347 |
|
1994 |
Bower A, Fleck N. Brittle fracture under a sliding line contact Journal of the Mechanics and Physics of Solids. 42: 1375-1396. DOI: 10.1016/0022-5096(94)90002-7 |
0.385 |
|
1994 |
Akisanya AR, Fleck NA. The edge cracking and decohesion of thin films International Journal of Solids and Structures. 31: 3175-3199. DOI: 10.1016/0020-7683(94)90094-9 |
0.316 |
|
1994 |
Jelf PM, Fleck NA. The failure of composite tubes due to combined compression and torsion Journal of Materials Science. 29: 3080-3084. DOI: 10.1007/Bf01117623 |
0.419 |
|
1993 |
Slaughter WS, Fleck NA, Budiansky B. Compressive failure of fiber composites: the roles of multiaxial loading and creep Journal of Engineering Materials and Technology, Transactions of the Asme. 115: 308-313. DOI: 10.1115/1.2904223 |
0.637 |
|
1993 |
Slaughter WS, Fleck NA. Viscoelastic Microbuckling of Fiber Composites Journal of Applied Mechanics. 60: 802-806. DOI: 10.1115/1.2900986 |
0.354 |
|
1993 |
Bower AF, Fleck NA, Needleman A, Ogbonna N. Indentation of a power law creeping solid Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 441: 97-124. DOI: 10.1098/Rspa.1993.0050 |
0.38 |
|
1993 |
Soutis C, Curtis PT, Fleck NA. Compressive failure of notched carbon fibre composites Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 440: 241-256. DOI: 10.1098/Rspa.1993.0014 |
0.391 |
|
1993 |
Akisanya AR, Fleck NA. Fatigue and creep of a constrained metal wire Acta Metallurgica Et Materialia. 41: 121-131. DOI: 10.1016/0956-7151(93)90344-R |
0.406 |
|
1993 |
Sharp SJ, Ashby MF, Fleck NA. Material response under static and sliding indentation loads Acta Metallurgica Et Materialia. 41: 685-692. DOI: 10.1016/0956-7151(93)90002-A |
0.388 |
|
1993 |
Wright SC, Fleck NA, Stronge WJ. Ballistic impact of polycarbonate-An experimental investigation International Journal of Impact Engineering. 13: 1-20. DOI: 10.1016/0734-743X(93)90105-G |
0.423 |
|
1993 |
Slaughter WS, Fleck NA. Compressive fatigue of fibre composites Journal of the Mechanics and Physics of Solids. 41: 1265-1284. DOI: 10.1016/0022-5096(93)90079-U |
0.394 |
|
1993 |
Fleck N, Hutchinson J. A phenomenological theory for strain gradient effects in plasticity Journal of the Mechanics and Physics of Solids. 41: 1825-1857. DOI: 10.1016/0022-5096(93)90072-N |
0.519 |
|
1993 |
Budiansky B, Fleck NA. Compressive failure of fibre composites Journal of the Mechanics and Physics of Solids. 41: 183-211. DOI: 10.1016/0022-5096(93)90068-Q |
0.662 |
|
1993 |
Sutcliffe MPF, Fleck NA. Effect of geometry on compressive failure of notched composites International Journal of Fracture. 59: 115-132. DOI: 10.1007/Bf00012386 |
0.402 |
|
1992 |
Jelf PM, Fleck NA. Compression Failure Mechanisms in Unidirectional Composites Journal of Composite Materials. 26: 2706-2726. DOI: 10.1177/002199839202601804 |
0.324 |
|
1992 |
Durban D, Fleck NA. Singular plastic fields in steady penetration of a rigid cone Journal of Applied Mechanics. 59: 706-710. DOI: 10.1115/1.2894032 |
0.397 |
|
1992 |
Wright SC, Huang Y, Fleck NA. Deep penetration of polycarbonate by a cylindrical punch Mechanics of Materials. 13: 277-284. DOI: 10.1016/0167-6636(92)90020-E |
0.512 |
|
1992 |
Fleck N, Kuhn L, McMeeking R. Yielding of metal powder bonded by isolated contacts Journal of the Mechanics and Physics of Solids. 40: 1139-1162. DOI: 10.1016/0022-5096(92)90064-9 |
0.346 |
|
1992 |
Fleck NA, Otoyo H, Needleman A. Indentation of porous solids International Journal of Solids and Structures. 29: 1613-1636. DOI: 10.1016/0020-7683(92)90012-I |
0.399 |
|
1992 |
Akisanya AR, Fleck NA. Brittle fracture of adhesive joints International Journal of Fracture. 58: 93-114. DOI: 10.1007/Bf00019971 |
0.349 |
|
1992 |
Akisanya AR, Fleck NA. Analysis of a wavy crack in sandwich specimens International Journal of Fracture. 55: 29-45. DOI: 10.1007/Bf00018031 |
0.352 |
|
1991 |
Soutis C, Fleck NA, Smith PA. Failure Prediction Technique for Compression Loaded Carbon Fibre-Epoxy Laminate with Open Holes: Journal of Composite Materials. 25: 1476-1498. DOI: 10.1177/002199839102501106 |
0.339 |
|
1991 |
Fleck NA. Brittle fracture due to an array of microcracks Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 432: 55-76. DOI: 10.1098/Rspa.1991.0004 |
0.336 |
|
1991 |
Soutis C, Fleck NA, Smith PA. Compression fatigue behaviour of notched carbon fibre-epoxy laminates International Journal of Fatigue. 13: 303-312. DOI: 10.1016/0142-1123(91)90357-5 |
0.397 |
|
1991 |
Fleck NA, Hutchinson JW, Zhigang S. Crack path selection in a brittle adhesive layer International Journal of Solids and Structures. 27: 1683-1703. DOI: 10.1016/0020-7683(91)90069-R |
0.534 |
|
1991 |
Soutis C, Fleck NA, Curtis PT. Hole-hole interaction in carbon fibre/epoxy laminates under uniaxial compression Composites. 22: 31-38. DOI: 10.1016/0010-4361(91)90100-U |
0.367 |
|
1990 |
Soutis C, Fleck NA. Static Compression Failure of Carbon Fibre T800/924C Composite Plate with a Single Hole: Journal of Composite Materials. 24: 536-558. DOI: 10.1177/002199839002400505 |
0.406 |
|
1990 |
Shercliff HR, Fleck NA. Effect Of Specimen Geometry On Fatigue Crack Growth In Plane Strain—Ii. Overload Response Fatigue & Fracture of Engineering Materials & Structures. 13: 297-310. DOI: 10.1111/J.1460-2695.1990.Tb00601.X |
0.381 |
|
1990 |
Shercliff HR, Fleck NA. Effect Of Specimen Geometry On Fatigue Crack Growth In Plane Strain—I. Constant Amplitude Response Fatigue & Fracture of Engineering Materials & Structures. 13: 287-296. DOI: 10.1111/J.1460-2695.1990.Tb00600.X |
0.335 |
|
1990 |
Fleck NA, Stronge WJ, Liu JH. High Strain-Rate Shear Response of Polycarbonate and Polymethyl Methacrylate Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 429: 459-479. DOI: 10.1098/Rspa.1990.0069 |
0.351 |
|
1990 |
Anderson PM, Fleck NA, Johnson KL. Localization of plastic deformation in shear due to microcracks Journal of the Mechanics and Physics of Solids. 38: 681-699. DOI: 10.1016/0022-5096(90)90028-3 |
0.388 |
|
1989 |
Shin CS, Fleck NA. Fatigue and fracture of a zinc die casting alloy International Journal of Fatigue. 11: 341-346. DOI: 10.1016/0142-1123(89)90060-1 |
0.327 |
|
1989 |
Fleck N, Hutchinson J, Tvergaard V. Softening by void nucleation and growth in tension and shear Journal of the Mechanics and Physics of Solids. 37: 515-540. DOI: 10.1016/0022-5096(89)90027-6 |
0.557 |
|
1989 |
Fleck NA, Durban D. Asymptotic fields at tip of conical notches and inclusions in a power hardening solid Journal of the Mechanics and Physics of Solids. 37: 233-263. DOI: 10.1016/0022-5096(89)90011-2 |
0.338 |
|
1988 |
Fleck NA. Influence of Stress State on Crack Growth Retardation Astm Special Technical Publications. 157-183. DOI: 10.1520/Stp23215S |
0.327 |
|
1988 |
Fleck NA, Wright SC, Liu JH, Stronge WJ. Ballistic Perforation Of Polycarbonate Sheet And Its High Strain Rate Response Le Journal De Physique Colloques. 49. DOI: 10.1051/Jphyscol:1988322 |
0.36 |
|
1987 |
Shin CS, Fleck NA. Overload Retardation In A Structural Steel Fatigue & Fracture of Engineering Materials & Structures. 9: 379-393. DOI: 10.1111/J.1460-2695.1987.Tb00464.X |
0.348 |
|
1986 |
Fleck NA, Hutchinson JW. Void growth in shear Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 407: 435-458. DOI: 10.1098/Rspa.1986.0104 |
0.561 |
|
1986 |
Fleck NA. Finite element analysis of plasticity-induced crack closure under plane strain conditions Engineering Fracture Mechanics. 25: 441-449. DOI: 10.1016/0013-7944(86)90258-4 |
0.357 |
|
1985 |
Fleck NA, Shin CS, Smith RA. Fatigue crack growth under compressive loading Engineering Fracture Mechanics. 21: 173-185. DOI: 10.1016/0013-7944(85)90063-3 |
0.332 |
|
1985 |
Fleck NA. Fatigue crack growth due to periodic underloads and overloads Acta Metallurgica. 33: 1339-1354. DOI: 10.1016/0001-6160(85)90244-5 |
0.333 |
|
1984 |
Fleck NA, Smith RA. Fatigue life prediction of a structural steel under service loading International Journal of Fatigue. 6: 203-210. DOI: 10.1016/0142-1123(84)90050-1 |
0.321 |
|
1983 |
Fleck NA. Some aspects of clip gauge design Strain. 19: 17-22. DOI: 10.1111/J.1475-1305.1983.Tb00435.X |
0.307 |
|
1982 |
Fleck NA, Smith RA. Crack closure - is it just a surface phenomenon? International Journal of Fatigue. 4: 157-160. DOI: 10.1016/0142-1123(82)90043-3 |
0.326 |
|
1981 |
Fleck NA, Smith RA. Effect of Density on Tensile Strength, Fracture Toughness, and Fatigue Crack Propagation Behaviour of Sintered Steel Powder Metallurgy. 24: 121-125. DOI: 10.1179/Pom.1981.24.3.121 |
0.391 |
|
Show low-probability matches. |