Year |
Citation |
Score |
2016 |
Yeung H, Guo Y, Mann JB, Compton WD, Chandrasekar S. Effect of low-frequency modulation on deformation and material flow in cutting of metals Journal of Tribology. 138. DOI: 10.1115/1.4031140 |
0.543 |
|
2015 |
Yeung H, Viswanathan K, Compton WD, Chandrasekar S. Sinuous flow in metals. Proceedings of the National Academy of Sciences of the United States of America. PMID 26216980 DOI: 10.1073/Pnas.1509165112 |
0.347 |
|
2015 |
Sagapuram D, Kustas AB, Compton WD, Tumble KP, Chandrasekar S. Direct single-stage processing of lightweight alloys into sheet by hybrid cuttingextrusion Journal of Manufacturing Science and Engineering, Transactions of the Asme. 137. DOI: 10.1115/1.4031022 |
0.485 |
|
2015 |
Guo Y, Compton WD, Chandrasekar S. In situ analysis of flow dynamics and deformation fields in cutting and sliding of metals Proceedings of the Royal Society a: Mathematical, Physical and Engineering Sciences. 471. DOI: 10.1098/Rspa.2015.0194 |
0.41 |
|
2015 |
Sagapuram D, Yeung H, Guo Y, Mahato A, M'Saoubi R, Compton WD, Trumble KP, Chandrasekar S. On control of flow instabilities in cutting of metals Cirp Annals - Manufacturing Technology. 64: 49-52. DOI: 10.1016/J.Cirp.2015.04.059 |
0.347 |
|
2014 |
Yeung H, Guo Y, Mann JB, Compton WD, Chandrasekar S. A comparative study of energy and material flow in modulation-assisted machining and conventional machining Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-4040 |
0.495 |
|
2013 |
Mann JB, Saldana CJ, Guo Y, Yeung H, Compton WD, Chandrasekar S. Effects of Controlled Modulation on Surface Textures in Deep-Hole Drilling Sae International Journal of Materials and Manufacturing. 6. DOI: 10.4271/2012-01-1868 |
0.719 |
|
2013 |
Yeung H, Guo Y, Sundaram NK, Mann JB, Compton WD, Chandrasekar S. Mechanics of modulation assisted machining Asme 2013 International Manufacturing Science and Engineering Conference Collocated With the 41st North American Manufacturing Research Conference, Msec 2013. 1. DOI: 10.1115/MSEC2013-1068 |
0.504 |
|
2011 |
Mann JB, Guo Y, Saldana C, Yeung H, Compton WD, Chandrasekar S. Modulation-assisted machining: A new paradigm in material removal processes Advanced Materials Research. 223: 514-522. DOI: 10.4028/Www.Scientific.Net/Amr.223.514 |
0.778 |
|
2011 |
Mann JB, Chandrasekar S, Compton WD, Trumble KP, Saldana C, Swaminathan S, John GE, Moscoso W, Murthy TG. Severe plastic deformation and the production of nanostructured alloys by machining Nanostructured Metals and Alloys: Processing, Microstructure, Mechanical Properties and Applications. 178-210. DOI: 10.1533/9780857091123.1.178 |
0.799 |
|
2011 |
Saldana C, King AH, Stach EA, Compton WD, Chandrasekar S. Vacancies, twins, and the thermal stability of ultrafine-grained copper Applied Physics Letters. 99. DOI: 10.1063/1.3669404 |
0.637 |
|
2011 |
Mann JB, Guo Y, Saldana C, Compton WD, Chandrasekar S. Enhancing material removal processes using modulation-assisted machining Tribology International. 44: 1225-1235. DOI: 10.1016/J.Triboint.2011.05.023 |
0.765 |
|
2010 |
Saldana C, Swaminathan S, Brown TL, Moscoso W, Mann JB, Compton WD, Chandrasekar S. Unusual applications of machining: Controlled nanostructuring of materials and surfaces Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0309081-03090812. DOI: 10.1115/1.4001665 |
0.805 |
|
2009 |
Mann JB, Saldana C, Compton WD, Farris TN, Trumble KP, Chandrasekar S. Effect of controlled modulation on chip formation and interface tribology in machining Proceedings of the Asme International Manufacturing Science and Engineering Conference 2009, Msec2009. 1: 187-191. DOI: 10.1115/MSEC2009-84381 |
0.49 |
|
2009 |
Brown TL, Saldana C, Murthy TG, Mann JB, Guo Y, Allard LF, King AH, Compton WD, Trumble KP, Chandrasekar S. A study of the interactive effects of strain, strain rate and temperature in severe plastic deformation of copper Acta Materialia. 57: 5491-5500. DOI: 10.1016/J.Actamat.2009.07.052 |
0.684 |
|
2009 |
Mann JB, Saldana C, Moscoso W, Compton WD, Chandrasekar S. Effects of controlled modulation on interface tribology and deformation in machining Tribology Letters. 35: 221-227. DOI: 10.1007/S11249-009-9451-5 |
0.826 |
|
2008 |
Iglesias P, Moscoso W, Mann JB, Saldana C, Shankar MR, Chandrasekar S, Compton WD, Trumble KP. Production analysis of new machining-based deformation processes for nanostructured materials International Journal of Material Forming. 1: 459-462. DOI: 10.1007/S12289-008-0094-0 |
0.809 |
|
2007 |
Moscoso W, Shankar MR, Mann JB, Compton WD, Chandrasekar S. Bulk nanostructured materials by large strain extrusion machining Journal of Materials Research. 22: 201-205. DOI: 10.1557/Jmr.2007.0021 |
0.785 |
|
2007 |
Mann JB, Saldana C, Chandrasekar S, Compton WD, Trumble KP. Metal particulate production by modulation-assisted machining Scripta Materialia. 57: 909-912. DOI: 10.1016/J.Scriptamat.2007.07.025 |
0.73 |
|
2007 |
Swaminathan S, Brown TL, Chandrasekar S, McNelley TR, Compton WD. Severe plastic deformation of copper by machining: Microstructure refinement and nanostructure evolution with strain Scripta Materialia. 56: 1047-1050. DOI: 10.1016/J.Scriptamat.2007.02.034 |
0.406 |
|
2007 |
Ravi Shankar M, Verma R, Rao BC, Chandrasekar S, Compton WD, King AH, Trumble KP. Severe plastic deformation of difficult-to-deform materials at near-ambient temperature Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 1899-1905. DOI: 10.1007/S11661-007-9257-8 |
0.387 |
|
2007 |
Swaminathan S, Ravi Shankar M, Rao BC, Compton WD, Chandrasekar S, King AH, Trumble KP. Severe plastic deformation (SPD) and nanostructured materials by machining Journal of Materials Science. 42: 1529-1541. DOI: 10.1007/S10853-006-0745-9 |
0.655 |
|
2006 |
Swaminathan S, Chandrasekar S, Compton WD, King AH, Trumble KP. Large strain deformation of single-phase copper solid solutions by machining Materials Science Forum. 503: 651-656. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.651 |
0.572 |
|
2006 |
Sevier M, Lee S, Shankar MR, Yang HTY, Chandrasekar S, Compton WD. Deformation mechanics associated with formation of ultra-fine grained chips in machining Materials Science Forum. 503: 379-384. DOI: 10.4028/Www.Scientific.Net/Msf.503-504.379 |
0.531 |
|
2006 |
Shankar MR, Rao BC, Lee S, Chandrasekar S, King AH, Compton WD. Severe plastic deformation (SPD) of titanium at near-ambient temperature Acta Materialia. 54: 3691-3700. DOI: 10.1016/J.Actamat.2006.03.056 |
0.478 |
|
2006 |
Lee S, Hwang J, Ravi Shankar M, Chandrasekar S, Compton WD. Large strain deformation field in machining Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 37: 1633-1643. DOI: 10.1007/S11661-006-0105-Z |
0.52 |
|
2005 |
Uluca Y, Rao BC, Ravi Shankar M, Brown TL, Mann JB, Chandrasekar S, Compton WD. Nanocrystalline materials from aerospace machining chips Sae Technical Papers. DOI: 10.4271/2005-01-3306 |
0.464 |
|
2005 |
Moscoso W, Olgun E, Compton WD, Chandrasekar S. Effect of low-frequency modulation on lubrication of chip-tool interface in machining Journal of Tribology. 127: 238-244. DOI: 10.1115/1.1829720 |
0.807 |
|
2005 |
Swaminathan S, Ravi Shankar M, Lee S, Hwang J, King AH, Kezar RF, Rao BC, Brown TL, Chandrasekar S, Compton WD, Trumble KP. Large strain deformation and ultra-fine grained materials by machining Materials Science and Engineering A. 410: 358-363. DOI: 10.1016/J.Msea.2005.08.139 |
0.675 |
|
2005 |
Ravi Shankar M, Chandrasekar S, Compton WD, King AH. Characteristics of aluminum 6061-T6 deformed to large plastic strains by machining Materials Science and Engineering A. 410: 364-368. DOI: 10.1016/J.Msea.2005.08.137 |
0.486 |
|
2005 |
Shankar MR, Chandrasekar S, King AH, Compton WD. Microstructure and stability of nanocrystalline aluminum 6061 created by large strain machining Acta Materialia. 53: 4781-4793. DOI: 10.1016/J.Actamat.2005.07.006 |
0.461 |
|
2004 |
Lee S, Hwang J, Shankar MR, Chandrasekar S, Compton WD. Velocity and strain distributions in two-dimensional orthogonal machining American Society of Mechanical Engineers, Manufacturing Engineering Division, Med. 15: 849-858. DOI: 10.1115/IMECE2004-62433 |
0.44 |
|
2004 |
Swaminathan S, Swanson C, Brown TL, Kezar RF, Chandrasekar S, Compton WD, Trumble KP. Microstructural refinement in steels by machining Materials Research Society Symposium Proceedings. 821: 65-70. |
0.433 |
|
2004 |
Swarainathan S, Brown TL, Shankar MR, Rao BC, Trumble KP, Compton WD, Chandrasekar S. Large scale manufacturing of ultra-fine grained materials Ultrafine Grained Materials Iii. 161-166. |
0.443 |
|
2004 |
Brown TL, Swaminathan S, Rao BC, Kezar RF, Chandrasekar S, Compton WD, Trumble KP, King AH. Machining as a method for studying effects of very large strain deformation Ultrafine Grained Materials Iii. 167-172. |
0.357 |
|
2003 |
Ackroyd B, Chandrasekar S, Compton WD. A model for the contact conditions at the chip-tool interface in machining Journal of Tribology. 125: 649-660. DOI: 10.1115/1.1537747 |
0.789 |
|
2003 |
Olgun E, Compton WD, Chandrasekar S. The effect of superimposed low-frequency modulation on lubrication in machining Tribology Series. 727-735. |
0.45 |
|
2002 |
Brown TL, Swaminathan S, Chandrasekar S, Compton WD, King AH, Trumble KP. Low-cost manufacturing process for nanostructured metals and alloys Journal of Materials Research. 17: 2484-2488. DOI: 10.1557/Jmr.2002.0362 |
0.644 |
|
2002 |
Chhabra PN, Ackroyd B, Compton WD, Chandrasekar S. Low-frequency modulation-assisted drilling using linear drives Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 216: 321-330. DOI: 10.1243/0954405021519997 |
0.73 |
|
2001 |
Chhabra PN, Compton WD, Chandrasekar S. Direct measurement of adhesion between clean metal and tool surfaces in machining Tribology Series. 39: 69-77. DOI: 10.1016/S0167-8922(01)80094-8 |
0.786 |
|
2001 |
Ackroyd B, Akcan NS, Chhabra P, Krishnamurthy K, Madhavan V, Chandrasekar S, Compton WD, Farris TN. Exploration of contact conditions in machining Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 215: 493-507. |
0.759 |
|
2000 |
Ackroyd B, Chandrasekar S, Compton WD. High speed photographic study of the tool-chip interface in machining Tribology Series. 38: 473-484. DOI: 10.1016/S0167-8922(00)80152-2 |
0.787 |
|
1964 |
Schnatterly S, Compton WD. F-aggregate color centers in KCl Physical Review. 135: A227-A232. DOI: 10.1103/PhysRev.135.A227 |
0.511 |
|
Show low-probability matches. |