Year |
Citation |
Score |
2016 |
Bheemreddy V, Chandrashekhara K, Dharani LR, Hilmas GE. Computational study of micromechanical damage behavior in continuous fiber-reinforced ceramic composites Journal of Materials Science. 51: 8610-8624. DOI: 10.1007/S10853-016-0120-4 |
0.497 |
|
2014 |
Wei J, Dehdashti MK, Dharani LR, Chandrashekhara K, Hilmas GE, Fahrenholtz WG. Simulation of thermal and mechanical response of (Zr,W)B2 ceramic after oxidation Applied Mechanics and Materials. 446: 40-44. DOI: 10.4028/Www.Scientific.Net/Amm.446-447.40 |
0.339 |
|
2014 |
Wei J, Dharani LR, Chandrashekhara K, Hilmas GE, Fahrenholtz WG. Modeling of Thermal and Mechanical Behavior of ZrB2-SiC Ceramics after High Temperature Oxidation Journal of Ceramics. 2014: 1-9. DOI: 10.1155/2014/169748 |
0.375 |
|
2014 |
Shetty MS, Dharani LR, Wei J, Stutts DS. Failure probability of laminated architectural glazing due to combined loading of wind and debris impact Engineering Failure Analysis. 36: 226-242. DOI: 10.1016/J.Engfailanal.2013.10.005 |
0.375 |
|
2013 |
Shetty MS, Wei J, Dharani LR, Stutts DS. Analysis of Damage in Laminated Architectural Glazing Subjected to Wind Loading and Windborne Debris Impact Buildings. 3: 422-441. DOI: 10.3390/Buildings3020422 |
0.397 |
|
2013 |
Bheemreddy V, Chandrashekhara K, Dharani LR, Hilmas GE. Modeling of fiber pull-out in continuous fiber reinforced ceramic composites using finite element method and artificial neural networks Computational Materials Science. 79: 663-673. DOI: 10.1016/J.Commatsci.2013.07.026 |
0.467 |
|
2012 |
Shetty MS, Dharani LR, Stutts DS. Analysis of Laminated Architectural Glazing Subjected to Wind Load and Windborne Debris Impact International Scholarly Research Notices. 2012: 1-9. DOI: 10.5402/2012/949070 |
0.356 |
|
2011 |
Barton BL, Shetty MS, Birman V, Dharani LR. Tapered cylindrical cantilever beam retrofitted with steel reinforced polymer or grout Composites Part B: Engineering. 42: 207-216. DOI: 10.1016/J.Compositesb.2010.10.006 |
0.399 |
|
2009 |
Zhao S, Hilmas GE, Dharani LR. Numerical simulation of wear in a C/C composite multidisk clutch Carbon. 47: 2219-2225. DOI: 10.1016/J.Carbon.2009.04.012 |
0.334 |
|
2008 |
Zhao S, Dharani LR, Liang X. Analysis of damage in laminated architectural glazing subjected to blast loading Advances in Structural Engineering. 11: 129-134. DOI: 10.1260/136943308784069432 |
0.465 |
|
2008 |
Zhao S, Hilmas GE, Dharani LR. Behavior of a composite multidisk clutch subjected to mechanical and frictionally excited thermal load Wear. 264: 1059-1068. DOI: 10.1016/J.Wear.2007.08.012 |
0.358 |
|
2007 |
Liang X, Headrick WL, Dharani LR, Zhao S. Modeling of failure in a high temperature black liquor gasifier refractory lining Engineering Failure Analysis. 14: 1233-1244. DOI: 10.1016/J.Engfailanal.2006.11.043 |
0.335 |
|
2007 |
Shabeer A, Sundararaman S, Chandrashekhara K, Dharani LR. Physicochemical properties and fracture behavior of soy-based resin Journal of Applied Polymer Science. 105: 656-663. DOI: 10.1002/App.26322 |
0.34 |
|
2006 |
Wei J, Dharani LR. Response of laminated architectural glazing subjected to blast loading International Journal of Impact Engineering. 32: 2032-2047. DOI: 10.1016/J.Ijimpeng.2005.05.012 |
0.366 |
|
2006 |
Wei J, Shetty MS, Dharani LR. Failure analysis of architectural glazing subjected to blast loading Engineering Failure Analysis. 13: 1029-1043. DOI: 10.1016/J.Engfailanal.2005.07.010 |
0.418 |
|
2006 |
Zhao S, Dharani LR, Chai L, Barbat SD. Analysis of damage in laminated automotive glazing subjected to simulated head impact Engineering Failure Analysis. 13: 582-597. DOI: 10.1016/J.Engfailanal.2004.12.038 |
0.427 |
|
2006 |
Wei J, Shetty MS, Dharani LR. Stress characteristics of a laminated architectural glazing subjected to blast loading Computers and Structures. 84: 699-707. DOI: 10.1016/J.Compstruc.2005.11.007 |
0.436 |
|
2006 |
Galati N, Nanni A, Dharani LR, Focacci F, Aiello MA. Thermal effects on bond between FRP rebars and concrete Composites Part a: Applied Science and Manufacturing. 37: 1223-1230. DOI: 10.1016/J.Compositesa.2005.05.043 |
0.383 |
|
2006 |
Liang X, Headrick WL, Dharani LR, Zhao S, Wei J. Failure analysis of refractory cup under thermal loading and chemical attack using continuum damage mechanics Unitecr '05 - Proceedings of the Unified International Technical Conference On Refractories: 9th Biennial Worldwide Congress On Refractories. 980-984. |
0.306 |
|
2005 |
Zhao S, Dharani LR, Liang X, Char L, Barbat SD. Crack initiation in laminated automotive glazing subjected to simulated head impact International Journal of Crashworthiness. 10: 229-236. DOI: 10.1533/Ijcr.2005.0340 |
0.434 |
|
2005 |
Wei J, Dharani LR. Fracture mechanics of laminated glass subjected to blast loading Theoretical and Applied Fracture Mechanics. 44: 157-167. DOI: 10.1016/J.Tafmec.2005.06.004 |
0.435 |
|
2005 |
Barton B, Wobbe E, Dharani LR, Silva P, Birman V, Nanni A, Alkhrdaji T, Thomas J, Tunis G. Characterization of reinforced concrete beams strengthened by steel reinforced polymer and grout (SRP and SRG) composites Materials Science and Engineering A. 412: 129-136. DOI: 10.1016/J.Msea.2005.08.151 |
0.393 |
|
2005 |
Dharani LR, Wei J, Yu J, Minor JE, Behr RA, Kremer PA. Laminated architectural glass subjected to blast, impact loading American Ceramic Society Bulletin. 84. |
0.372 |
|
2004 |
Gupta V, Roy S, Dharani LR. Non-linear viscoelastic and physical ageing characterisation of thermoset PR-500 epoxy resin Polymers and Polymer Composites. 12: 351-371. DOI: 10.1177/096739110401200501 |
0.384 |
|
2004 |
Yang X, Wei J, Nanni A, Dharani LR. Shape effect on the performance of carbon fiber reinforced polymer wraps Journal of Composites For Construction. 8: 444-451. DOI: 10.1061/(Asce)1090-0268(2004)8:5(444) |
0.487 |
|
2004 |
Dharani LR, Ji F, Behr RA, Minor JE, Kremer PA. Breakage prediction of laminated glass using the "sacrificial ply" design concept Journal of Architectural Engineering. 10: 126-135. DOI: 10.1061/(Asce)1076-0431(2004)10:4(126) |
0.438 |
|
2004 |
Dharani LR, Yu J. Failure modes of glass panels subjected to soft missile impact Structures and Materials. 14: 163-171. |
0.396 |
|
2003 |
Dharani LR, Mettu SR, Zhao S, Barbat SD, Chai L. Modeling fracture in laminated automotive glazing impacted by spherical featureless headform Sae Technical Papers. DOI: 10.4271/2003-01-1225 |
0.477 |
|
2003 |
Dharani LR, Wei J, Ji FS, Zhao JH. Saturation of transverse cracking with delamination in polymer cross-ply composite laminates International Journal of Damage Mechanics. 12: 89-114. DOI: 10.1177/1056789503012002001 |
0.479 |
|
2002 |
Chen G, Barker MG, MacKenzie DS, Ramsay CW, Alderson J, Dharani LR, Yu J. Forensic investigation of failed mast arms of traffic signal supported structures Transportation Research Record. 1814: 9-16. DOI: 10.3141/1814-02 |
0.37 |
|
2002 |
Roy S, Nie GH, Karedla R, Dharani L. Stress Intensity Factor for an Elliptic Inclusion in Orthotropic Laminates Subjected to Freeze-thaw: Model Verification Polymers & Polymer Composites. 10: 571-587. DOI: 10.1177/096739110201000801 |
0.432 |
|
2002 |
Roy S, Nie GH, Karedla RS, Dharani LR. Matrix Cracking and Delaminations in Orthotropic Laminates Subjected to Freeze-Thaw: Model Development Polymers & Polymer Composites. 10: 327-339. DOI: 10.1177/096739110201000501 |
0.447 |
|
2002 |
Saxe TJ, Behr RA, Minor JE, Kremer PA, Dharani LR. Effects of missile size and glass type on impact resistance of "Sacrificial ply" laminated glass Journal of Architectural Engineering. 8: 24-39. DOI: 10.1061/(Asce)1076-0431(2002)8:1(24) |
0.378 |
|
2002 |
Dharani LR, Wei J, Ji FS. Failure analysis of laminated architectural glass panels subjected to blast loading Structures and Materials. 11: 37-46. |
0.335 |
|
2001 |
Chen G, Wu J, Yu J, Dharani LR, Barker MG. Fatigue Assessment Of Traffic Signal Mast Arms Based On Field Test Data Under Natural Wind Gusts Transportation Research Record. 1770: 188-194. DOI: 10.3141/1770-24 |
0.396 |
|
2001 |
Gupta V, Roy S, Dharani LR. Multi-Scale Modelling of Long-Term Mechanical Behaviour in Polymer Composite Laminates with Woven Fibre Architecture Polymers & Polymer Composites. 9: 297-317. DOI: 10.1177/096739110100900501 |
0.427 |
|
2001 |
Gupta V, Roy S, Dharani LR. Micromechanics Modeling of long-term interlaminar properties of woven fabric polymer composites 19th Aiaa Applied Aerodynamics Conference. |
0.352 |
|
2000 |
Kaiser ND, Behr RA, Minor JE, Dharani LR, Ji F, Kremer PA. Impact resistance of laminated glass using `sacrificial ply' design concept Journal of Architectural Engineering. 6: 24-34. DOI: 10.1061/(Asce)1076-0431(2000)6:1(24) |
0.389 |
|
2000 |
Zhao JH, Wang XF, Dharani LR, Wei J. Notch stress concentrations and failure characteristics in laminates with triple parallel notches Composites Science and Technology. 60: 2865-2872. DOI: 10.1016/S0266-3538(00)00161-5 |
0.421 |
|
2000 |
Zhao JH, Chen X, Dharani LR, Ji FS. Stress analysis of a multilayered composite cylinder with defects Theoretical and Applied Fracture Mechanics. 34: 143-153. DOI: 10.1016/S0167-8442(00)00032-X |
0.426 |
|
2000 |
Roy S, Dharani LR, Gupta V, Xu W. Modeling of hygrothermal and aging effects in textile composites 41st Structures, Structural Dynamics, and Materials Conference and Exhibit. |
0.344 |
|
2000 |
Lu P, Staffer JO, Babcock RA, Dharani LR. Composite prepared from epoxidized soybean oil American Chemical Society, Polymer Preprints, Division of Polymer Chemistry. 41: 1340-1341. |
0.302 |
|
1999 |
Behr RA, Kremer PA, Dharani LR, Ji FS, Kaiser ND. Dynamic strains in architectural laminated glass subjected to low velocity impacts from small projectiles Journal of Materials Science. 34: 5749-5756. DOI: 10.1023/A:1004702100357 |
0.383 |
|
1999 |
Wang TWH, Blum FD, Dharani LR. Effect of interfacial mobility on flexural strength and fracture toughness of glass/epoxy laminates Journal of Materials Science. 34: 4873-4882. DOI: 10.1023/A:1004676214290 |
0.406 |
|
1999 |
Dharani LR, Haug SB. Fiber/matrix interface properties of hybrid ceramic matrix composites Collection of Technical Papers - Aiaa/Asme/Asce/Ahs/Asc Structures, Structural Dynamics and Materials Conference. 2: 1159-1164. |
0.373 |
|
1998 |
Dharani LR, Ji FS. Dynamic analysis of normal impact of occupant head on laminated glass Sae Technical Papers. DOI: 10.4271/980862 |
0.314 |
|
1998 |
Flocker FW, Dharani LR. Modeling interply debonding in laminated architectural glass subject to low velocity impact Structural Engineering and Mechanics. 6: 485-496. DOI: 10.12989/Sem.1998.6.5.485 |
0.401 |
|
1998 |
Ji F, Dharani LR, Mall S. Analysis of transverse cracking in cross-ply composite laminates Advanced Composite Materials. 7: 83-103. DOI: 10.1163/156855198X00075 |
0.465 |
|
1998 |
Flocker FW, Dharani LR. Low velocity impact resistance of laminated architectural glass Journal of Architectural Engineering. 4: 12-17. DOI: 10.1061/(Asce)1076-0431(1998)4:1(12) |
0.372 |
|
1998 |
Ji FS, Dharani LR. Non-Axisymmetric Matrix Cracking and Interface Debonding with Friction in Ceramic Composites Applied Composite Materials. 5: 379-397. DOI: 10.1023/A:1008820315282 |
0.514 |
|
1998 |
Ji FS, Dharani LR, Behr RA. Damage probability in laminated glass subjected to low velocity small missile impacts Journal of Materials Science. 33: 4775-4782. DOI: 10.1023/A:1004457624817 |
0.417 |
|
1998 |
Ji FS, Dharani LR. Non-axisymmetric matrix cracking and interface debonding in unidirectional brittle matrix composites European Journal of Mechanics, a/Solids. 17: 253-268. DOI: 10.1016/S0997-7538(98)80085-5 |
0.517 |
|
1998 |
Dharani LR, Haug SB. Transverse fracture toughness of unidirectional continuous fiber and hybrid ceramic matrix composites American Society of Mechanical Engineers, Materials Division (Publication) Md. 84: 167-168. |
0.387 |
|
1998 |
Ji FS, Dharani LR, Mall S. Analysis of transverse cracking in cross-ply composite laminates Advanced Composite Materials: the Official Journal of the Japan Society of Composite Materials. 7: 83-103. |
0.371 |
|
1997 |
Flocker FW, Dharani LR. Modelling fracture in laminated architectural glass subject to low velocity impact Journal of Materials Science. 32: 2587-2594. DOI: 10.1023/A:1018698900942 |
0.379 |
|
1997 |
Flocker FW, Dharani LR. Stresses in laminated glass subject to low velocity impact Engineering Structures. 19: 851-856. DOI: 10.1016/S0141-0296(97)00162-4 |
0.458 |
|
1997 |
Gopal P, Dharani LR, Blum FD. Fracture behaviour of chopped glass strand reinforced phenolic composites Polymers and Polymer Composites. 5: 327-335. |
0.336 |
|
1996 |
Goethe JE, Dharani LR, Carroll DR. An experimental investigation of the failure modes in hybrid ceramic matrix composites Journal of Composites Technology and Research. 18: 194-201. DOI: 10.1520/Ctr10530J |
0.49 |
|
1996 |
Carroll DR, Dharani LR. Elastic properties of imperfectly bonded short fiber composites Composite Structures. 35: 195-206. DOI: 10.1016/0263-8223(96)00034-7 |
0.413 |
|
1996 |
Gopal P, Dharani LR, Blum FD. Hybrid phenolic friction composites containing Kevlar® pulp part I. Enhancement of friction and wear performance Wear. 193: 199-206. DOI: 10.1016/0043-1648(95)06723-X |
0.408 |
|
1996 |
Gopal P, Dharani LR, Blum FD. Hybrid phenolic friction composites containing Kevlar® pulp: Part II - Wear surface characteristics Wear. 193: 180-185. DOI: 10.1016/0043-1648(95)06709-4 |
0.403 |
|
1996 |
Dharani LR, Ji FS. Non-axisymmetric matrix cracking in unidirectional brittle matrix composites Engineering Fracture Mechanics. 53: 57-68. DOI: 10.1016/0013-7944(95)00120-K |
0.476 |
|
1995 |
Venkatakrishnaiah S, Dharani LR. Analysis of an Axisymmetric Matrix Crack with Interfacial Debond International Journal of Damage Mechanics. 4: 319-337. DOI: 10.1177/105678959500400402 |
0.543 |
|
1995 |
Hong W, Dharani LR. Pressureless Sintering of a Ceramic Matrix with Multiple Rigid Inclusions: Finite Element Model Journal of the American Ceramic Society. 78: 1593-1600. DOI: 10.1111/J.1151-2916.1995.Tb08856.X |
0.359 |
|
1995 |
Dharani LR, Blum FD. Simpler test method for measuring the interfacial strength of fiber tows in polymer and ceramic matrix composites Materials Technology. 10: 8-10. DOI: 10.1080/10667857.1995.11752580 |
0.432 |
|
1995 |
Dharani LR, Zhao Y, Hong W. Modeling of pressureless constant heating rate sintering of ceramic matrix composites Journal of Materials Processing Tech.. 53: 617-629. DOI: 10.1016/0924-0136(94)01740-R |
0.42 |
|
1995 |
Gopal P, Dharani LR, Blum FD. Load, speed and temperature sensitivities of a carbon-fiber-reinforced phenolic friction material Wear. 181: 913-921. DOI: 10.1016/0043-1648(95)90215-5 |
0.412 |
|
1995 |
Dharani LR, Ji FS. Effect of transverse cracking on stiffness reduction of cross-ply laminates Applied Composite Materials: An International Journal For the Science and Application of Composite Materials. 2: 217-231. DOI: 10.1007/Bf00567193 |
0.434 |
|
1995 |
Carroll DR, Dharani LR, Goethe JE, Haug SB, Cai W, Hall MA. Damage evolution in hybrid ceramic matrix composites Ceramic Engineering and Science Proceedings. 16: 949-956. |
0.397 |
|
1995 |
Dharani LR, Ji F. 3-D shear lag model for the analysis of interface damage in ceramic matrix composites American Society of Mechanical Engineers, Materials Division (Publication) Md. 56: 47-56. |
0.445 |
|
1994 |
Hong W, Dharani LR. Densification Rates of Ceramic Matrix Composites with Initial Matrix Inhomogeneity Materials and Manufacturing Processes. 9: 869-883. DOI: 10.1080/10426919408934958 |
0.387 |
|
1994 |
Gopal P, Dharani LR, Blum FD. Fade and wear characteristics of a glass-fiber-reinforced phenolic friction material Wear. 174: 119-127. DOI: 10.1016/0043-1648(94)90093-0 |
0.39 |
|
1994 |
Gopal P, Dharani LR, Subramaniam N, Blum FD. 'Bundle-debond' technique for characterizing fibre/matrix interfacial adhesion Journal of Materials Science. 29: 1185-1190. DOI: 10.1007/Bf00975062 |
0.444 |
|
1994 |
Haug SB, Dharani LR, Carroll DR. Fabrication of hybrid ceramic matrix composites Applied Composite Materials. 1: 177-181. DOI: 10.1007/Bf00567578 |
0.482 |
|
1994 |
Gopal P, Yen S‐, Dharani LR. Flexural behavior of stepped graphite/epoxy laminates Polymer Composites. 15: 18-24. DOI: 10.1002/Pc.750150104 |
0.413 |
|
1994 |
Menon N, Blum FD, Dharani LR. Use of titanate coupling agents in kevlar–phenolic composites Journal of Applied Polymer Science. 54: 113-123. DOI: 10.1002/App.1994.070540112 |
0.38 |
|
1994 |
Dharani LR, Carroll DR, Haug SB, Goethe JE, Laws AD, Raj P. Microcracking stress and transverse properties of hybrid ceramic matrix composites Ceramic Engineering and Science Proceedings. 15: 303-308. |
0.394 |
|
1993 |
Mukunda VG, Dharani LR. On matrix splitting in edge notched unidirectional composites Advanced Composite Materials. 3: 7-18. DOI: 10.1163/156855193X00025 |
0.474 |
|
1993 |
Tsai WT, Dharani LR. Non-self-similar fiber fracture in unidirectional composites Engineering Fracture Mechanics. 44: 43-49. DOI: 10.1016/0013-7944(93)90080-C |
0.506 |
|
1993 |
Mukunda VG, Dharani LR. A comparison of classical and consistent shear lag models for failure analysis of unidirectional composites Engineering Fracture Mechanics. 45: 865-874. DOI: 10.1016/0013-7944(93)90071-Y |
0.503 |
|
1993 |
Subramaniam N, Blum FD, Dharani LR. Effects of moisture and other contaminants in friction composites Polymer Engineering &Amp; Science. 33: 1204-1211. DOI: 10.1002/Pen.760331808 |
0.35 |
|
1993 |
Zhao Y, Dharani LR. Effects of thermal residual stress on a unidirectional composite with damage Computers and Structures. 48: 773-779. |
0.383 |
|
1992 |
Carroll DR, Dharani LR. The Strength and Modulus of Imperfectly Bonded Whisker Reinforced Ceramic Matrix Composites International Journal of Damage Mechanics. 1: 464-480. DOI: 10.1177/105678959200100406 |
0.338 |
|
1992 |
Dharani LR, Zhao YL, Chai L. Micromechanical Modeling of Failure in Fiber Reinforced Intermetallic Matrix Composites International Journal of Damage Mechanics. 1: 257-272. DOI: 10.1177/105678959200100206 |
0.537 |
|
1992 |
Venkatakrishnaiah S, Dharani LR. Damage tolerance of Symmetric Buffer Strip Laminates Advanced Composites Letters. 1: 96369359200100. DOI: 10.1177/096369359200100303 |
0.361 |
|
1992 |
Mukunda VG, Dharani LR. Effect of friction on matrix damage in unidirectional composites Advanced Composite Materials. 2: 195-205. DOI: 10.1163/156855192X00044 |
0.516 |
|
1992 |
Carroll DR, Dharani LR. Effect of Temperature on the Ultimate Strength and Modulus of Whisker‐Reinforced Ceramics Journal of the American Ceramic Society. 75: 786-794. DOI: 10.1111/J.1151-2916.1992.Tb04142.X |
0.383 |
|
1992 |
Dharani LR, Venkatakrishnaiah S, Dupuy RA. Effect of specimen width on the fracture of unidirectional metal matrix composites Composites Science and Technology. 45: 117-123. DOI: 10.1016/0266-3538(92)90034-Z |
0.535 |
|
1992 |
Popejoy DB, Dharani LR. Effect of fiber coating and interfacial debonding on crack growth in fiber-reinforced composites Theoretical and Applied Fracture Mechanics. 18: 73-79. DOI: 10.1016/0167-8442(92)90008-L |
0.484 |
|
1992 |
Popejoy DB, Dharani LR, Tang H. Crack growth at interfaces in bimaterial systems and composites International Journal of Solids and Structures. 29: 3113-3123. DOI: 10.1016/0020-7683(92)90030-W |
0.462 |
|
1992 |
Dharani LR, Gopal P, Blum FD. Bundle-debond technique for characterization of moisturized kevlar/phenolic interfaces American Society of Mechanical Engineers, Aerospace Division (Publication) Ad. 29: 51-56. |
0.357 |
|
1991 |
Meyer ES, Dharani LR. Stress concentration at circular cutouts in buffer strip laminates Aiaa Journal. 29: 1967-1972. DOI: 10.2514/3.10826 |
0.46 |
|
1991 |
Dharani LR, Chai L. Multiple cracks in three-dimensional (3-D) unidirectional composites. Compliance and energy release rates Journal of Composites Technology and Research. 13: 257-263. DOI: 10.1520/Ctr10234J |
0.433 |
|
1991 |
Subramaniam N, Sinha BR, Blum FD, Chen Y, Dharani LR. Glass Fiber Based Friction Materials International Journal of Polymeric Materials. 15: 93-102. DOI: 10.1080/00914039108031526 |
0.418 |
|
1991 |
Dharani LR, Chai L. Embedded flaws in unidirectional composites Composite Structures. 19: 285-297. DOI: 10.1016/0263-8223(91)90032-T |
0.521 |
|
1991 |
Chai L, Dharani LR. Analysis of elastic crack bridging in ceramic matrix composites Theoretical and Applied Fracture Mechanics. 15: 105-112. DOI: 10.1016/0167-8442(91)90009-9 |
0.541 |
|
1991 |
Chai L, Dharani LR. Embedded and surface flaws in unidirectional composites Computers and Structures. 41: 397-402. DOI: 10.1016/0045-7949(91)90442-O |
0.555 |
|
1991 |
Dharani LR, Recker RL. Growth of longitudinal matrix damage in unidirectional composites Engineering Fracture Mechanics. 38: 185-195. DOI: 10.1016/0013-7944(91)90081-B |
0.507 |
|
1991 |
Dharani LR, Rahaman MN, Wang SH. Interfacial shear stress in SiC fibre-reinforced cordierite Journal of Materials Science. 26: 655-660. DOI: 10.1007/Bf00588300 |
0.428 |
|
1990 |
Dharani LR, Chai L, Pagano NJ. Steady-state cracking in ceramic matrix composites Composites Science and Technology. 39: 29-43. DOI: 10.1016/0266-3538(90)90031-Y |
0.517 |
|
1990 |
Dharani LR, Tang H. Micromechanics characterization of sublaminate damage International Journal of Fracture. 46: 123-140. DOI: 10.1007/Bf00041999 |
0.512 |
|
1990 |
Dharani LR, Tang H. Effect of hygrothermal stresses on interface fracture American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 203: 63-68. |
0.376 |
|
1990 |
Dharani LR, Kennett MW. Effect of heat-treat condition on residual strength of metal matrix composites National Sampe Technical Conference. 22: 788-799. |
0.393 |
|
1990 |
Dharani LR. Analysis of a ceramic matrix composite flexure specimen Astm Special Technical Publication. 87-97. |
0.433 |
|
1990 |
Dharani LR, Tang H. Initiation and growth of delamination along 0/90 interfaces in laminates National Sampe Symposium and Exhibition (Proceedings). 35: 273-284. |
0.43 |
|
1990 |
Narayan S, Sinha BR, Blum FD, Dharani LR, Chen YR. Non-asbestos friction materials. Mechanical properties of binary systems S.a.M.P.E. Quarterly. 21: 17-22. |
0.367 |
|
1989 |
Dharani LR, Tang H. Failure Analysis of Unidirectional Ceramic Matrix Composites under Flexure Journal of Composite Materials. 23: 308-325. DOI: 10.1177/002199838902300401 |
0.423 |
|
1987 |
Dharani LR. An assessment of buffer strips for reduction of stress concentration at cutouts in composite laminates Composites Science and Technology. 30: 221-231. DOI: 10.1016/0266-3538(87)90010-8 |
0.513 |
|
1987 |
Dharani LR, Seaton CP. Analysis of a buffer strip laminate with fiber and matrix damage and interlaminar debonding Composite Structures. 7: 139-158. DOI: 10.1016/0263-8223(87)90004-3 |
0.485 |
|
1985 |
Dharani LR. Stress concentration at a rectangular cutout in a buffer strip laminate Sae Technical Papers. DOI: 10.4271/850892 |
0.381 |
|
1985 |
Dharani LR. DAMAGE TOLERANCE ANALYSIS OF A UNIDIRECTIONAL BUFFER STRIP LAMINATE CONTAINING A RECTANGULAR CUT-OUT Developments in Mechanics. 13: 105-106. |
0.389 |
|
1984 |
Dharani LR, Goree JG. Analysis of a unidirectional, symmetric buffer strip laminate with damage Engineering Fracture Mechanics. 20: 801-811. DOI: 10.1016/0013-7944(84)90088-2 |
0.528 |
|
1983 |
Dharani LR, Jones WF, Goree JG. Mathematical modeling of damage in unidirectional composites Engineering Fracture Mechanics. 17: 555-573. DOI: 10.1016/0013-7944(83)90115-7 |
0.541 |
|
Show low-probability matches. |