| Year |
Citation |
Score |
| 2020 |
Kuliiev R, Orlovskaya N, Hyer H, Sohn Y, Lugovy M, Ha D, Radovic M, Castle EG, Reece MJ, Vallachira Warriam Sasikumar P, Conti L, Graule T, Kuebler J, Blugan G. Spark Plasma Sintered BC-Structural, Thermal, Electrical and Mechanical Properties. Materials (Basel, Switzerland). 13. PMID 32244703 DOI: 10.3390/Ma13071612 |
0.337 |
|
| 2020 |
Zhan Z, Chen Y, Radovic M, Srivastava A. Non-classical crystallographic slip in a ternary carbide – Ti2AlC Materials Research Letters. 8: 275-281. DOI: 10.1080/21663831.2020.1748733 |
0.328 |
|
| 2020 |
Benitez R, Kan WH, Gao H, O'Neal M, Proust G, Srivastava A, Radovic M. Mechanical properties and microstructure evolution of Ti2AlC under compression in 25–1100 °C temperature range Acta Materialia. 189: 154-165. DOI: 10.1016/J.Actamat.2020.02.057 |
0.443 |
|
| 2019 |
Carrasco-Pena A, Jordan R, Dieguez J, Coronado-Rodríguez A, Ozdemir VB, Kwok K, Orlovskaya N, Vazquez-Molina DA, Uribe-Romo FJ, Bolon A, Radovic M, Grasso S, Reece MJ. Design and development of ring-on-ring jig for biaxial strength testing of brittle ceramic composite materials: ZrB2-30wt-%SiB6 Advances in Applied Ceramics. 118: 159-168. DOI: 10.1080/17436753.2019.1613102 |
0.312 |
|
| 2019 |
Garlea E, Radovic M, Liaw P. High-temperature dependency of elastic mechanical behavior of two wrought magnesium alloys AZ31B and ZK60A studied by resonant ultrasound spectroscopy Materials Science and Engineering: A. 758: 86-95. DOI: 10.1016/J.Msea.2019.04.115 |
0.446 |
|
| 2019 |
Chen Y, Kota S, Barsoum MW, Radovic M. Compressive deformation of MoAlB up to 1100 °C Journal of Alloys and Compounds. 774: 1216-1222. DOI: 10.1016/J.Jallcom.2018.09.124 |
0.617 |
|
| 2018 |
An H, Habib T, Shah S, Gao H, Radovic M, Green MJ, Lutkenhaus JL. Surface-agnostic highly stretchable and bendable conductive MXene multilayers. Science Advances. 4: eaaq0118. PMID 29536044 DOI: 10.1126/Sciadv.Aaq0118 |
0.304 |
|
| 2018 |
Lugovy M, Orlovskaya N, Pathak S, Radovic M, Lara-Curzio E, Verbylo D, Kuebler J, Graule T, Reece MJ. Time and frequency dependent mechanical properties of LaCoO3-based perovskites: Internal friction and negative creep Journal of Applied Physics. 124: 205103. DOI: 10.1063/1.5037049 |
0.355 |
|
| 2018 |
Son W, Duong T, Talapatra A, Prehn E, Tan Z, Radovic M, Arróyave R. Minimal effect of stacking number on intrinsic cleavage and shear behavior of Tin+1AlCn and Tan+1AlCn MAX phases Journal of Applied Physics. 123: 225102. DOI: 10.1063/1.5026323 |
0.318 |
|
| 2018 |
Sarwar J, Shrouf T, Srinivasa A, Gao H, Radovic M, Kakosimos K. Characterization of thermal performance, flux transmission performance and optical properties of MAX phase materials under concentrated solar irradiation Solar Energy Materials and Solar Cells. 182: 76-91. DOI: 10.1016/J.Solmat.2018.03.018 |
0.35 |
|
| 2018 |
Kota S, Chen Y, Wang J, May SJ, Radovic M, Barsoum MW. Synthesis and characterization of the atomic laminate Mn2AlB2 Journal of the European Ceramic Society. 38: 5333-5340. DOI: 10.1016/J.Jeurceramsoc.2018.07.051 |
0.533 |
|
| 2018 |
Velasco B, Gordo E, Hu L, Radovic M, Tsipas SA. Influence of porosity on elastic properties of Ti2AlC and Ti3SiC2 MAX phase foams Journal of Alloys and Compounds. 764: 24-35. DOI: 10.1016/J.Jallcom.2018.06.027 |
0.348 |
|
| 2018 |
Xing J, Muliana A, Radovic M. Characterization of thermal transport properties of Ag/BaTiO3 composites using hot disk: Numerical simulations International Journal of Heat and Mass Transfer. 116: 599-608. DOI: 10.1016/J.Ijheatmasstransfer.2017.09.045 |
0.335 |
|
| 2018 |
Benitez R, Gao H, O'Neal M, Lovelace P, Proust G, Radovic M. Effects of microstructure on the mechanical properties of Ti2AlC in compression Acta Materialia. 143: 130-140. DOI: 10.1016/J.Actamat.2017.10.019 |
0.414 |
|
| 2017 |
Kota S, Zapata-Solvas E, Chen Y, Radovic M, Lee WE, Barsoum MW. Isothermal and Cyclic Oxidation of MoAlB in Air from 1100°C to 1400°C Journal of the Electrochemical Society. 164: C930-C938. DOI: 10.1149/2.1891713Jes |
0.497 |
|
| 2017 |
Son W, Gao H, Duong T, Talapatra A, Radovic M, Arróyave R. Effect of
A
mixing on elastic modulus, cleavage stress, and shear stress in the
Ti3(SixAl1−x)C2
MAX phase Physical Review B. 95. DOI: 10.1103/Physrevb.95.235131 |
0.35 |
|
| 2017 |
Kota S, Agne M, Zapata-Solvas E, Dezellus O, Lopez D, Gardiola B, Radovic M, Barsoum MW. Elastic properties, thermal stability, and thermodynamic parameters of MoAlB Physical Review B. 95: 144108. DOI: 10.1103/Physrevb.95.144108 |
0.537 |
|
| 2017 |
Gao P, Bolon A, Taneja M, Xie Z, Orlovskaya N, Radovic M. Thermal expansion and elastic moduli of electrolyte materials for high and intermediate temperature solid oxide fuel cell Solid State Ionics. 300: 1-9. DOI: 10.1016/J.Ssi.2016.11.015 |
0.459 |
|
| 2017 |
Xing J, Radovic M, Muliana AH. Elastic and Dielectric Properties of Active Ag/BaTiO3 Composites Experimental Mechanics. 58: 645-660. DOI: 10.1007/S11340-017-0271-5 |
0.399 |
|
| 2017 |
Naik Parrikar P, Benitez R, Gao H, Radovic M, Shukla A. The Effect of Grain Size on Deformation and Failure of Ti2AlC MAX Phase under Thermo-Mechanical Loading Experimental Mechanics. 57: 675-685. DOI: 10.1007/S11340-017-0264-4 |
0.427 |
|
| 2017 |
Xing J, Radovic M, Muliana A. A nonlinear constitutive model for describing cyclic mechanical responses of $$\hbox {BaTiO}_{3}/\hbox {Ag}$$ composites Acta Mechanica. 228: 2017-2032. DOI: 10.1007/S00707-017-1801-Z |
0.407 |
|
| 2016 |
Hu L, O'Neil M, Erturun V, Benitez R, Proust G, Karaman I, Radovic M. High-Performance Metal/Carbide Composites with Far-From-Equilibrium Compositions and Controlled Microstructures. Scientific Reports. 6: 35523. PMID 27752106 DOI: 10.1038/Srep35523 |
0.405 |
|
| 2016 |
Brankovic Z, Lukovic-Golic D, Radojkovic A, Cirkovic J, Pajic D, Marinkovic-Stanojevic Z, Xing J, Radovic M, Li G, Brankovic G. Spark plasma sintering of hydrothermally synthesized bismuth ferrite Processing and Application of Ceramics. 10: 257-264. DOI: 10.2298/Pac1604257B |
0.345 |
|
| 2016 |
Talapatra A, Duong T, Son W, Gao H, Radovic M, Arróyave R. High-throughput combinatorial study of the effect of M site alloying on the solid solution behavior of M2AlC MAX phases Physical Review B - Condensed Matter and Materials Physics. 94. DOI: 10.1103/Physrevb.94.104106 |
0.342 |
|
| 2016 |
Arróyave R, Talapatra A, Duong T, Son W, Gao H, Radovic M. Does aluminum play well with others? Intrinsic Al-A alloying behavior in 211/312 MAX phases Materials Research Letters. 1-9. DOI: 10.1080/21663831.2016.1241319 |
0.333 |
|
| 2016 |
Gao H, Benitez R, Son W, Arroyave R, Radovic M. Structural, physical and mechanical properties of Ti3(Al1−xSix)C2 solid solution with x=0–1 Materials Science and Engineering A. 676: 197-208. DOI: 10.1016/J.Msea.2016.08.098 |
0.397 |
|
| 2016 |
Hanaor DAH, Hu L, Kan WH, Proust G, Foley M, Karaman I, Radovic M. Compressive performance and crack propagation in Al alloy/Ti2AlC composites Materials Science and Engineering A. 672: 247-256. DOI: 10.1016/J.Msea.2016.06.073 |
0.389 |
|
| 2016 |
Naik Parrikar P, Benitez R, Gao H, Radovic M, Shukla A. Mechanical response of fine grained Ti2AlC under extreme thermo-mechanical loading conditions Materials Science and Engineering A. 658: 176-184. DOI: 10.1016/J.Msea.2016.01.106 |
0.418 |
|
| 2016 |
Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo V, Grasso S, Reece M. Corrigendum to “Mechanical properties and residual stresses in ZrB2–SiC spark plasma sintered ceramic composites” [J. Eur. Ceram. Soc. 36 (June (7)) (2016) 1527–1537] Journal of the European Ceramic Society. 36: 3545. DOI: 10.1016/J.Jeurceramsoc.2016.05.041 |
0.334 |
|
| 2016 |
Agne MT, Radovic M, Bentzel GW, Barsoum MW. Stability of V2AlC with Al in 800-1000 °C temperature range and in situ synthesis of V2AlC/Al composites Journal of Alloys and Compounds. 666: 279-286. DOI: 10.1016/J.Jallcom.2016.01.050 |
0.551 |
|
| 2016 |
Xing J, Radovic M, Muliana A. Thermal properties of BaTiO3/Ag composites at different temperatures Composites Part B: Engineering. 90: 287-301. DOI: 10.1016/J.Compositesb.2015.12.014 |
0.374 |
|
| 2016 |
Son W, Duong T, Talapatra A, Gao H, Arróyave R, Radovic M. Ab-initio investigation of the finite-temperatures structural, elastic, and thermodynamic properties of Ti3AlC2 and Ti3SiC2 Computational Materials Science. 124: 420-427. DOI: 10.1016/J.Commatsci.2016.08.015 |
0.317 |
|
| 2016 |
Benitez R, Kan WH, Gao H, O'Neal M, Proust G, Radovic M. Room temperature stress-strain hysteresis in Ti2AlC revisited Acta Materialia. 105: 294-305. DOI: 10.1016/J.Actamat.2015.12.004 |
0.437 |
|
| 2016 |
Coppola AM, Hu L, Thakre PR, Radovic M, Karaman I, Sottos NR, White SR. Active Cooling of a Microvascular Shape Memory Alloy-Polymer Matrix Composite Hybrid Material Advanced Engineering Materials. DOI: 10.1002/Adem.201600020 |
0.371 |
|
| 2015 |
Gao P, Lara-Curzio E, Trejo R, Radovic M. Dynamic mechanical analysis of phase transformations and anelastic relaxation in stabilized Zirconias Journal of the Electrochemical Society. 162: F14-F22. DOI: 10.1149/2.0941414Jes |
0.412 |
|
| 2015 |
Dapčević A, Poleti D, Rogan J, Radojković A, Radović M, Branković G. A new electrolyte based on Tm3+-doped δ-Bi2O3-type phase with enhanced conductivity Solid State Ionics. 280: 18-23. DOI: 10.1016/J.Ssi.2015.08.004 |
0.368 |
|
| 2015 |
Kothalkar A, Cerit A, Proust G, Basu S, Radovic M, Karaman I. Interfacial study of NiTi-Ti3SiC2 solid state diffusion bonded joints Materials Science and Engineering A. 622: 168-177. DOI: 10.1016/J.Msea.2014.10.033 |
0.373 |
|
| 2015 |
Stadelmann R, Lugovy M, Orlovskaya N, Mchaffey P, Radovic M, Sglavo VM, Grasso S, Reece MJ. Mechanical properties and residual stresses in ZrB2-SiC spark plasma sintered ceramic composites Journal of the European Ceramic Society. DOI: 10.1016/J.Jeurceramsoc.2016.01.009 |
0.42 |
|
| 2015 |
Xie Z, Lugovy M, Orlovskaya N, Graule T, Kuebler J, Mueller M, Gao H, Radovic M, Cullen DA. Hexagonal OsB2: Sintering, microstructure and mechanical properties Journal of Alloys and Compounds. 634: 168-178. DOI: 10.1016/J.Jallcom.2015.01.291 |
0.388 |
|
| 2014 |
Hu L, Kothalkar A, O'Neil M, Karaman I, Radovic M. Current-Activated, Pressure-Assisted Infiltration: A Novel, Versatile Route for Producing Interpenetrating Ceramic–Metal Composites Materials Research Letters. 2: 124-130. DOI: 10.1080/21663831.2013.873498 |
0.33 |
|
| 2014 |
Bhattacharya R, Benitez R, Radovic M, Goulbourne NC. High strain-rate response and deformation mechanisms in polycrystalline Ti2AlC Materials Science and Engineering A. 598: 319-326. DOI: 10.1016/J.Msea.2014.01.032 |
0.373 |
|
| 2014 |
Gudlur P, Boczek A, Radovic M, Muliana A. On characterizing the mechanical properties of aluminum-alumina composites Materials Science and Engineering A. 590: 352-359. DOI: 10.1016/J.Msea.2013.10.053 |
0.425 |
|
| 2014 |
Gudlur P, Muliana A, Radovic M. The effect of microstructural morphology on the elastic, inelastic, and degradation behaviors of aluminum-alumina composites Mechanics Research Communications. 57: 49-56. DOI: 10.1016/J.Mechrescom.2014.02.003 |
0.396 |
|
| 2014 |
Hu L, Kothalkar A, Proust G, Karaman I, Radovic M. Fabrication and characterization of NiTi/Ti3SiC2 and NiTi/Ti2AlC composites Journal of Alloys and Compounds. 610: 635-644. DOI: 10.1016/J.Jallcom.2014.04.224 |
0.378 |
|
| 2014 |
Gudlur P, Muliana A, Radovic M. Effective thermo-mechanical properties of aluminum-alumina composites using numerical approach Composites Part B: Engineering. 58: 534-543. DOI: 10.1016/J.Compositesb.2013.10.052 |
0.435 |
|
| 2014 |
Cheng F, Hu L, Reddy JN, Karaman I, Hoffman E, Radovic M. Temperature-dependent thermal properties of a shape memory alloy/MAX phase composite: Experiments and modeling Acta Materialia. 68: 267-278. DOI: 10.1016/J.Actamat.2013.12.014 |
0.382 |
|
| 2014 |
Kothalkar AD, Benitez R, Hu L, Radovic M, Karaman I. Thermo-mechanical response and damping behavior of shape memory alloy-MAX phase composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 2646-2658. DOI: 10.1007/S11661-014-2193-5 |
0.41 |
|
| 2013 |
Xing J, Jang A, Radovic M, Muliana A. Thermal properties of BaTiO3/Ag composites undergoing phase transformation due to temperature changes 28th Annual Technical Conference of the American Society For Composites 2013, Asc 2013. 2: 1631-1639. |
0.321 |
|
| 2013 |
Radovic M, Barsoum MW. MAX phases: Bridging the gap between metals and ceramics American Ceramic Society Bulletin. 92: 20-27. |
0.389 |
|
| 2012 |
Basu S, Obando N, Gowdy A, Karaman I, Radovic M. Long-term oxidation of Ti 2AlC in air and water vapor at 1000-1300°C temperature range Journal of the Electrochemical Society. 159: C90-C96. DOI: 10.1149/2.052202Jes |
0.336 |
|
| 2012 |
Lizcano M, Gonzalez A, Basu S, Lozano K, Radovic M. Effects of water content and chemical composition on structural properties of alkaline activated metakaolin-based geopolymers Journal of the American Ceramic Society. 95: 2169-2177. DOI: 10.1111/J.1551-2916.2012.05184.X |
0.305 |
|
| 2012 |
Gudlur P, Forness A, Lentz J, Radovic M, Muliana A. Thermal and mechanical properties of Al/Al 2O 3 composites at elevated temperatures Materials Science and Engineering A. 531: 18-27. DOI: 10.1016/J.Msea.2011.10.001 |
0.391 |
|
| 2012 |
Hu L, Benitez R, Basu S, Karaman I, Radovic M. Processing and characterization of porous Ti 2AlC with controlled porosity and pore size Acta Materialia. 60: 6266-6277. DOI: 10.1016/J.Actamat.2012.07.052 |
0.426 |
|
| 2012 |
Lizcano M, Kim HS, Basu S, Radovic M. Mechanical properties of sodium and potassium activated metakaolin-based geopolymers Journal of Materials Science. 47: 2607-2616. DOI: 10.1007/S10853-011-6085-4 |
0.368 |
|
| 2011 |
Barsoum MW, Radovic M. Elastic and mechanical properties of the MAX phases Annual Review of Materials Research. 41: 195-227. DOI: 10.1146/Annurev-Matsci-062910-100448 |
0.569 |
|
| 2011 |
Spencer CB, Cõrdoba JM, Obando N, Sakulich A, Radovic M, Odén M, Hultman L, Barsoum MW. Phase evaluation in Al2O3 fiber-reinforced Ti 2AlC during sintering in the 1300°C-1500°C temperature range Journal of the American Ceramic Society. 94: 3327-3334. DOI: 10.1111/J.1551-2916.2011.04612.X |
0.732 |
|
| 2011 |
Spencer CB, Cõrdoba JM, Obando NH, Radovic M, Odén M, Hultman L, Barsoum MW. The reactivity of Ti2AlC and Ti3SiC2 with SiC fibers and powders up to temperatures of 1550°C Journal of the American Ceramic Society. 94: 1737-1743. DOI: 10.1111/J.1551-2916.2010.04332.X |
0.58 |
|
| 2011 |
Arróyave R, Radovic M. Ab initio investigation of Ti2Al(C,N) solid solutions Physical Review B - Condensed Matter and Materials Physics. 84. DOI: 10.1103/Physrevb.84.134112 |
0.381 |
|
| 2011 |
Pham HH, Williams ME, Mahaffey P, Radovic M, Arroyave R, Cagin T. Finite-temperature elasticity of fcc Al: Atomistic simulations and ultrasonic measurements Physical Review B - Condensed Matter and Materials Physics. 84. DOI: 10.1103/Physrevb.84.064101 |
0.341 |
|
| 2011 |
Basu S, Ozaydin MF, Kothalkar A, Karaman I, Radovic M. Phase and morphology evolution in high-temperature Ti3SiC 2-NiTi diffusion-bonded joints Scripta Materialia. 65: 237-240. DOI: 10.1016/J.Scriptamat.2011.04.015 |
0.334 |
|
| 2010 |
Adamczak AD, Spriggs AA, Fitch DM, Radovic M, Grunlan JC. Low-temperature formation of ultra-high-temperature transition metal carbides from salt-polymer precursors Journal of the American Ceramic Society. 93: 2222-2228. DOI: 10.1111/J.1551-2916.2010.03724.X |
0.358 |
|
| 2009 |
Barcelo F, Doriot S, Cozzika T, Le Flem M, Béchade JL, Radovic M, Barsoum MW. Electron-backscattered diffraction and transmission electron microscopy study of post-creep Ti3SiC2 Journal of Alloys and Compounds. 488: 181-189. DOI: 10.1016/J.Jallcom.2009.08.073 |
0.545 |
|
| 2009 |
Orlovskaya N, Lugovy M, Carpenter C, Pathak S, Steinmetz D, Lara-Curzio E, Klemenz C, Radovic M. On thermal and vibrational properties of LaGaO3 single crystals Acta Materialia. 57: 2984-2992. DOI: 10.1016/J.Actamat.2009.03.002 |
0.365 |
|
| 2008 |
Radovic M, Ganguly A, Barsoum MW. Elastic properties and phonon conductivities of Ti3Al(C0.5,N0.5)2 and Ti2Al(C0.5,N0.5) solid solutions Journal of Materials Research. 23: 1517-1521. DOI: 10.1557/Jmr.2008.0200 |
0.648 |
|
| 2008 |
Basu S, Radovic M, Barsoum MW. Room temperature constant-stress creep of a brittle solid studied by spherical nanoindentation Journal of Applied Physics. 104. DOI: 10.1063/1.2975991 |
0.562 |
|
| 2008 |
Radovic M, Speakman SA, Allard LF, Payzant EA, Lara-Curzio E, Kriven WM, Lloyd J, Fegely L, Orlovskaya N. Thermal, mechanical and phase stability of LaCoO3 in reducing and oxidizing environments Journal of Power Sources. 184: 77-83. DOI: 10.1016/J.Jpowsour.2008.05.063 |
0.306 |
|
| 2008 |
Orlovskaya N, Lugovy M, Pathak S, Steinmetz D, Lloyd J, Fegely L, Radovic M, Payzant EA, Lara-Curzio E, Allard LF, Kuebler J. Thermal and mechanical properties of LaCoO3 and La0.8Ca0.2CoO3 perovskites Journal of Power Sources. 182: 230-239. DOI: 10.1016/J.Jpowsour.2008.03.072 |
0.345 |
|
| 2007 |
Byeon JW, Liu J, Hopkins M, Fischer W, Garimella N, Park KB, Brady MP, Radovic M, El-Raghy T, Sohn YH. Microstructure and residual stress of alumina scale formed on Ti 2AlC at high temperature in air Oxidation of Metals. 68: 97-111. DOI: 10.1007/S11085-007-9063-0 |
0.387 |
|
| 2006 |
Radovic M, Barsoum MW, Ganguly A, Zhen T, Finkel P, Kalidindi SR, Lara-Curzio E. On the elastic properties and mechanical damping of Ti3SiC2, Ti3GeC2, Ti3Si0.5Al0.5C2 and Ti2AlC in the 300-1573 K temperature range Acta Materialia. 54: 2757-2767. DOI: 10.1016/J.Actamat.2006.02.019 |
0.767 |
|
| 2005 |
Barsoum MW, Radovic M, Zhen T, Finkel P, Kalidindi SR. Dynamic elastic hysteretic solids and dislocations. Physical Review Letters. 94: 085501. PMID 15783903 DOI: 10.1103/Physrevlett.94.085501 |
0.712 |
|
| 2005 |
Zhen T, Barsoum MW, Kalidindi SR, Radovic M, Sun ZM, El-Raghy T. Compressive creep of fine and coarse-grained T3SiC2 in air in the 1100-1300 °c temperature range Acta Materialia. 53: 4963-4973. DOI: 10.1016/J.Actamat.2005.05.037 |
0.705 |
|
| 2004 |
Murugaiah A, Souchet A, El-Raghy T, Radovic M, Sundberg M, Barsoum MW. Tape Casting, Pressureless Sintering, and Grain Growth in Ti3SiC2Compacts Journal of the American Ceramic Society. 87: 550-556. DOI: 10.1111/J.1551-2916.2004.00550.X |
0.516 |
|
| 2004 |
Radovic M, Lara-Curzio E. Elastic Properties of Nickel-Based Anodes for Solid Oxide Fuel Cells as a Function of the Fraction of Reduced NiO Journal of the American Ceramic Society. 87: 2242-2246. DOI: 10.1111/J.1151-2916.2004.Tb07499.X |
0.386 |
|
| 2004 |
Radovic M, Lara-Curzio E, Riester L. Comparison of different experimental techniques for determination of elastic properties of solids Materials Science and Engineering: A. 368: 56-70. DOI: 10.1016/J.Msea.2003.09.080 |
0.315 |
|
| 2004 |
Radovic M, Lara-Curzio E. Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen Acta Materialia. 52: 5747-5756. DOI: 10.1016/J.Actamat.2004.08.023 |
0.369 |
|
| 2003 |
Barsoum MW, Zhen T, Kalidindi SR, Radovic M, Murugaiah A. Fully reversible, dislocation-based compressive deformation of Ti3SiC2 to 1 GPa. Nature Materials. 2: 107-11. PMID 12612695 DOI: 10.1038/Nmat814 |
0.706 |
|
| 2003 |
Barsoum MW, Ho-Duc LH, Radovic M, El-Raghy T. Long Time Oxidation Study of Ti[sub 3]SiC[sub 2], Ti[sub 3]SiC[sub 2]/SiC, and Ti[sub 3]SiC[sub 2]/TiC Composites in Air Journal of the Electrochemical Society. 150: B166. DOI: 10.1149/1.1556035 |
0.521 |
|
| 2003 |
Radovic M, Barsoum M, El-Raghy T, Wiederhorn S. Tensile creep of coarse-grained Ti3SiC2 in the 1000–1200°C temperature range Journal of Alloys and Compounds. 361: 299-312. DOI: 10.1016/S0925-8388(03)00435-3 |
0.59 |
|
| 2002 |
Radovic M, Barsoum M, El-Raghy T, Wiederhorn S, Luecke W. Effect of temperature, strain rate and grain size on the mechanical response of Ti3SiC2 in tension Acta Materialia. 50: 1297-1306. DOI: 10.1016/S1359-6454(01)00424-4 |
0.571 |
|
| 2001 |
Barsoum MW, Radovic M, Finkel P, El-Raghy T. Ti3SiC2 and ice Applied Physics Letters. 79: 479-481. DOI: 10.1063/1.1384479 |
0.663 |
|
| 2001 |
Radovic M, Barsoum M, El-Raghy T, Wiederhorn S. Tensile creep of fine grained (3–5 μm) Ti3SiC2 in the 1000–1200°C temperature range Acta Materialia. 49: 4103-4112. DOI: 10.1016/S1359-6454(01)00243-9 |
0.557 |
|
| 2000 |
Radovic M, Barsoum M, El-Raghy T, Seidensticker J, Wiederhorn S. Tensile properties of Ti3SiC2 in the 25–1300°C temperature range Acta Materialia. 48: 453-459. DOI: 10.1016/S1359-6454(99)00351-1 |
0.575 |
|
| Show low-probability matches. |