Year |
Citation |
Score |
2020 |
Zhu C, Wang H, Kaufmann K, Vecchio KS. A computer vision approach to study surface deformation of materials Measurement Science and Technology. 31: 055602. DOI: 10.1088/1361-6501/Ab65D9 |
0.303 |
|
2020 |
Qin M, Yan Q, Wang H, Hu C, Vecchio KS, Luo J. High-entropy monoborides: Towards superhard materials Scripta Materialia. 189: 101-105. DOI: 10.1016/J.Scriptamat.2020.08.018 |
0.324 |
|
2020 |
Zhang C, MacDonald BE, Guo F, Wang H, Zhu C, Liu X, Kang Y, Xie X, Zhou Y, Vecchio KS, Lavernia EJ. Cold-workable refractory complex concentrated alloys with tunable microstructure and good room-temperature tensile behavior Scripta Materialia. 188: 16-20. DOI: 10.1016/J.Scriptamat.2020.07.006 |
0.363 |
|
2020 |
Wang H, Kou R, Vecchio KS. Design, Fabrication and Optimization of FeAl-FeAl2 Eutectoid Metallic-Intermetallic Laminate (MIL) Composites Materialia. 13: 100859. DOI: 10.1016/J.Mtla.2020.100859 |
0.425 |
|
2020 |
Qin M, Gild J, Hu C, Wang H, Hoque SB, Braun JL, Harrington TJ, Hopkins PE, Vecchio KS, Luo J. Dual-phase high-entropy ultra-high temperature ceramics Journal of the European Ceramic Society. 40: 5037-5050. DOI: 10.1016/J.Jeurceramsoc.2020.05.040 |
0.328 |
|
2020 |
Qin M, Gild J, Wang H, Harrington T, Vecchio KS, Luo J. Dissolving and stabilizing soft WB2 and MoB2 phases into high-entropy borides via boron-metals reactive sintering to attain higher hardness Journal of the European Ceramic Society. 40: 4348-4353. DOI: 10.1016/J.Jeurceramsoc.2020.03.063 |
0.344 |
|
2020 |
Wang Y, Liu X, Wang H, Vecchio K. The effect of oxides on Fe/Al interfacial reaction in Metal-Intermetallic Laminate (MIL) composites Journal of Alloys and Compounds. 845: 156268. DOI: 10.1016/J.Jallcom.2020.156268 |
0.33 |
|
2020 |
Gild J, Wright A, Quiambao-Tomko K, Qin M, Tomko JA, Shafkat bin Hoque M, Braun JL, Bloomfield B, Martinez D, Harrington T, Vecchio K, Hopkins PE, Luo J. Thermal conductivity and hardness of three single-phase high-entropy metal diborides fabricated by borocarbothermal reduction and spark plasma sintering Ceramics International. 46: 6906-6913. DOI: 10.1016/J.Ceramint.2019.11.186 |
0.357 |
|
2020 |
Zhang C, Zhu C, Cao P, Wang X, Ye F, Kaufmann K, Casalena L, MacDonald BE, Pan X, Vecchio K, Lavernia EJ. Aged metastable high-entropy alloys with heterogeneous lamella structure for superior strength-ductility synergy Acta Materialia. 199: 602-612. DOI: 10.1016/J.Actamat.2020.08.043 |
0.402 |
|
2020 |
Wang H, Zhu C, Vecchio KS. Deformation and fracture evolution of FeAl-based metallic-intermetallic laminate (MIL) composites Acta Materialia. 194: 496-515. DOI: 10.1016/J.Actamat.2020.04.005 |
0.428 |
|
2020 |
Wang H, Kou R, Harrington T, Vecchio KS. Electromigration effect in Fe-Al diffusion couples with field-assisted sintering Acta Materialia. 186: 631-643. DOI: 10.1016/J.Actamat.2020.01.008 |
0.304 |
|
2019 |
Shin S, Zhu C, Zhang C, Vecchio KS. Extraordinary strength-ductility synergy in a heterogeneous-structured β -Ti alloy through microstructural optimization Materials Research Letters. 7: 467-473. DOI: 10.1080/21663831.2019.1652856 |
0.334 |
|
2019 |
Gild J, Kaufmann K, Vecchio K, Luo J. Reactive flash spark plasma sintering of high-entropy ultrahigh temperature ceramics Scripta Materialia. 170: 106-110. DOI: 10.1016/J.Scriptamat.2019.05.039 |
0.35 |
|
2019 |
Zhang C, Zhu C, Shin S, Casalena L, Vecchio K. Grain boundary precipitation of tantalum and NiAl in superelastic FeNiCoAlTaB alloy Materials Science and Engineering: A. 743: 372-381. DOI: 10.1016/J.Msea.2018.11.077 |
0.305 |
|
2019 |
Zhang C, Zhu C, Vecchio K. Non-equiatomic FeNiCoAl-based high entropy alloys with multiscale heterogeneous lamella structure for strength and ductility Materials Science and Engineering: A. 743: 361-371. DOI: 10.1016/J.Msea.2018.11.073 |
0.393 |
|
2019 |
Gild J, Braun J, Kaufmann K, Marin E, Harrington T, Hopkins P, Vecchio K, Luo J. A high-entropy silicide: (Mo0.2Nb0.2Ta0.2Ti0.2W0.2)Si2 Journal of Materiomics. 5: 337-343. DOI: 10.1016/J.Jmat.2019.03.002 |
0.331 |
|
2019 |
Shin S, Zhu C, Vecchio KS. Effect of twinned-structure on deformation behavior and correlated mechanical properties in a metastable β-Ti alloy Journal of Alloys and Compounds. 811: 152054. DOI: 10.1016/J.Jallcom.2019.152054 |
0.397 |
|
2019 |
Wang H, Harrington T, Zhu C, Vecchio KS. Design, fabrication and characterization of FeAl-based metallic-intermetallic laminate (MIL) composites Acta Materialia. 175: 445-456. DOI: 10.1016/J.Actamat.2019.06.039 |
0.4 |
|
2019 |
Harrington TJ, Gild J, Sarker P, Toher C, Rost CM, Dippo OF, McElfresh C, Kaufmann K, Marin E, Borowski L, Hopkins PE, Luo J, Curtarolo S, Brenner DW, Vecchio KS. Phase stability and mechanical properties of novel high entropy transition metal carbides Acta Materialia. 166: 271-280. DOI: 10.1016/J.Actamat.2018.12.054 |
0.394 |
|
2019 |
Torresani E, Giuntini D, Zhu C, Harrington T, Vecchio KS, Molinari A, Bordia RK, Olevsky EA. Anisotropy of Mass Transfer During Sintering of Powder Materials with Pore–Particle Structure Orientation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 1033-1049. DOI: 10.1007/S11661-018-5037-X |
0.348 |
|
2018 |
Sarker P, Harrington T, Toher C, Oses C, Samiee M, Maria JP, Brenner DW, Vecchio KS, Curtarolo S. High-entropy high-hardness metal carbides discovered by entropy descriptors. Nature Communications. 9: 4980. PMID 30478375 DOI: 10.1038/S41467-018-07160-7 |
0.322 |
|
2018 |
Zhang C, Zhu C, Harrington T, Vecchio K. Design of non-equiatomic high entropy alloys with heterogeneous lamella structure towards strength-ductility synergy Scripta Materialia. 154: 78-82. DOI: 10.1016/J.Scriptamat.2018.05.020 |
0.37 |
|
2018 |
Shin S, Zhu C, Vecchio KS. Observations on {332}<113> twinning-induced softening in Ti-Nb Gum metal Materials Science and Engineering: A. 724: 189-198. DOI: 10.1016/J.Msea.2018.03.062 |
0.392 |
|
2018 |
Zhang C, Zhu C, Shin S, Vecchio K. Enhancement of <001> recrystallization texture in non-equiatomic Fe-Ni-Co-Al-based high entropy alloys by combination of annealing and Cr addition Journal of Alloys and Compounds. 768: 277-286. DOI: 10.1016/J.Jallcom.2018.07.221 |
0.356 |
|
2018 |
Zhu C, Harrington T, Gray GT, Vecchio KS. Dislocation-type evolution in quasi-statically compressed polycrystalline nickel Acta Materialia. 155: 104-116. DOI: 10.1016/J.Actamat.2018.05.022 |
0.318 |
|
2018 |
Zhang C, Zhu C, Harrington T, Casalena L, Wang H, Shin S, Vecchio KS. Multifunctional Non-Equiatomic High Entropy Alloys with Superelastic, High Damping, and Excellent Cryogenic Properties Advanced Engineering Materials. 21: 1800941. DOI: 10.1002/Adem.201800941 |
0.329 |
|
2017 |
Shin S, Zhang C, Vecchio KS. Phase stability dependence of deformation mode correlated mechanical properties and elastic properties in Ti-Nb gum metal Materials Science and Engineering: A. 702: 173-183. DOI: 10.1016/J.Msea.2017.06.099 |
0.368 |
|
2017 |
Wang Y, Wang H, Liu X, Vecchio KS. Microstructure evolution in pure Ni and Invar-based Metallic-Intermetallic Laminate (MIL) composites Materials Science and Engineering: A. 682: 454-465. DOI: 10.1016/J.Msea.2016.11.033 |
0.374 |
|
2017 |
Andersen LM, Faulhaber S, Harrington T, Hofmann DC, Cheng H, Vecchio KS. An experimental investigation on the notch toughness of Cu-Zr-based bulk metallic glasses with in-situ crystallization Journal of Non-Crystalline Solids. 469: 70-78. DOI: 10.1016/J.Jnoncrysol.2017.04.040 |
0.381 |
|
2017 |
Adharapurapu RR, Vecchio KS. Effects of aging and cooling rate on the transformation of nanostructured Ti-50.8Ni Journal of Alloys and Compounds. 693: 150-163. DOI: 10.1016/J.Jallcom.2016.09.112 |
0.738 |
|
2017 |
Wang Y, Wang H, Liu X, Vecchio KS. Microstructure evolution in Ni and Ni-superalloy based metallic-intermetallic laminate (MIL) composites Intermetallics. 87: 70-80. DOI: 10.1016/J.Intermet.2017.04.009 |
0.405 |
|
2017 |
Zhu C, Livescu V, Harrington T, Dippo O, Gray GT, Vecchio KS. Investigation of the shear response and geometrically necessary dislocation densities in shear localization in high-purity titanium International Journal of Plasticity. 92: 148-163. DOI: 10.1016/J.Ijplas.2017.03.009 |
0.339 |
|
2017 |
Chiu P, Vecchio KS, Nesterenko VF. Dynamic compressive strength and mechanism of failure of Al-W fiber composite tubes with ordered mesostructure International Journal of Impact Engineering. 100: 1-6. DOI: 10.1016/J.Ijimpeng.2016.10.003 |
0.386 |
|
2017 |
Li Z, Wang B, Zhao S, Valiev RZ, Vecchio KS, Meyers MA. Dynamic deformation and failure of ultrafine-grained titanium Acta Materialia. 125: 210-218. DOI: 10.1016/J.Actamat.2016.11.041 |
0.354 |
|
2017 |
Zou G, Shen X, Guo C, Vecchio KS, Jiang F. Propagation behavior of the stress wave in a hollow Hopkinson transmission bar Shock Waves. 28: 163-173. DOI: 10.1007/S00193-017-0728-6 |
0.328 |
|
2016 |
Gild J, Zhang Y, Harrington T, Jiang S, Hu T, Quinn MC, Mellor WM, Zhou N, Vecchio K, Luo J. High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics. Scientific Reports. 6: 37946. PMID 27897255 DOI: 10.1038/Srep37946 |
0.375 |
|
2016 |
Marquez AM, Braithwaite CH, Weihs TP, Krywopusk NM, Gibbins DJ, Vecchio KS, Meyers MA. Fragmentation and constitutive response of tailored mesostructured aluminum compacts Journal of Applied Physics. 119. DOI: 10.1063/1.4945813 |
0.337 |
|
2016 |
Andersen LM, Hofmann DC, Vecchio KS. Effect of zirconium purity on the glass-forming-ability and notch toughness of Cu43Zr43Al7Be7 Materials Science and Engineering: A. 674: 397-405. DOI: 10.1016/J.Msea.2016.08.009 |
0.382 |
|
2016 |
Wang Y, Zhou S, Vecchio KS. Annealing effects on the microstructure and properties of an Fe-based Metallic-Intermetallic Laminate (MIL) composite Materials Science and Engineering A. 665: 47-58. DOI: 10.1016/J.Msea.2016.04.031 |
0.369 |
|
2016 |
Wang Y, Vecchio KS. Microstructure evolution in Fe-based-aluminide metallic-intermetallic laminate (MIL) composites Materials Science and Engineering A. 649: 325-337. DOI: 10.1016/J.Msea.2015.10.019 |
0.345 |
|
2016 |
Vecchio KS, Jiang F. Fracture toughness of Ceramic-Fiber-Reinforced Metallic-Intermetallic-Laminate (CFR-MIL) composites Materials Science and Engineering A. 649: 407-416. DOI: 10.1016/J.Msea.2015.10.018 |
0.417 |
|
2016 |
Zhu C, Harrington T, Livescu V, Gray GT, Vecchio KS. Determination of geometrically necessary dislocations in large shear strain localization in aluminum Acta Materialia. 118: 383-394. DOI: 10.1016/J.Actamat.2016.07.051 |
0.351 |
|
2016 |
Gray GT, Vecchio KS, Livescu V. Compact forced simple-shear sample for studying shear localization in materials Acta Materialia. 103: 12-22. DOI: 10.1016/J.Actamat.2015.09.051 |
0.367 |
|
2016 |
Hofmann DC, Andersen LM, Kolodziejska J, Roberts SN, Borgonia J, Johnson WL, Vecchio KS, Kennett A. Optimizing Bulk Metallic Glasses for Robust, Highly Wear-Resistant Gears Advanced Engineering Materials. 19: 1600541. DOI: 10.1002/Adem.201600541 |
0.335 |
|
2015 |
Javed RA, Shifan Z, Guo C, Vecchio KS, Jiang F. Investigation into dynamic response of a three-point bend specimen in a Hopkinson bar loaded fracture test using numerical methods Advances in Mechanical Engineering. 7: 1-13. DOI: 10.1177/1687814015591315 |
0.375 |
|
2015 |
Wang Y, Vecchio KS. Microstructure evolution in a martensitic 430 stainless steel-Al metallic-intermetallic laminate (MIL) composite Materials Science and Engineering A. 643: 72-85. DOI: 10.1016/J.Msea.2015.07.014 |
0.333 |
|
2015 |
Cao Y, Zhu S, Guo C, Vecchio KS, Jiang F. Numerical Investigation of the Ballistic Performance of Metal-Intermetallic Laminate Composites Applied Composite Materials. 22: 437-456. DOI: 10.1007/S10443-014-9416-1 |
0.391 |
|
2014 |
Lambert PK, Hustedt CJ, Vecchio KS, Huskins EL, Casem DT, Gruner SM, Tate MW, Philipp HT, Woll AR, Purohit P, Weiss JT, Kannan V, Ramesh KT, Kenesei P, Okasinski JS, et al. Time-resolved x-ray diffraction techniques for bulk polycrystalline materials under dynamic loading. The Review of Scientific Instruments. 85: 093901. PMID 25273733 DOI: 10.1063/1.4893881 |
0.327 |
|
2012 |
Jiang F, Vecchio KS. Wallner lines in a nanocrystalline Ni-23% Fe alloy Scripta Materialia. 67: 907-910. DOI: 10.1016/J.Scriptamat.2012.08.033 |
0.374 |
|
2012 |
Wei CT, Vitali E, Jiang F, Du SW, Benson DJ, Vecchio KS, Thadhani NN, Meyers MA. Quasi-static and dynamic response of explosively consolidated metal-aluminum powder mixtures Acta Materialia. 60: 1418-1432. DOI: 10.1016/J.Actamat.2011.10.027 |
0.364 |
|
2011 |
Kulin RM, Jiang F, Vecchio KS. Effects of age and loading rate on equine cortical bone failure. Journal of the Mechanical Behavior of Biomedical Materials. 4: 57-75. PMID 21094480 DOI: 10.1016/J.Jmbbm.2010.09.006 |
0.797 |
|
2011 |
Kulin RM, Jiang F, Vecchio KS. Loading rate effects on the R-curve behavior of cortical bone. Acta Biomaterialia. 7: 724-32. PMID 20883834 DOI: 10.1016/J.Actbio.2010.09.027 |
0.798 |
|
2011 |
Kulin RM, Chen PY, Jiang F, Vecchio KS. A study of the dynamic compressive behavior of Elk antler Materials Science and Engineering C. 31: 1030-1041. DOI: 10.1016/J.Msec.2011.03.002 |
0.796 |
|
2011 |
Price RD, Jiang F, Kulin RM, Vecchio KS. Effects of ductile phase volume fraction on the mechanical properties of Ti-Al3Ti metal-intermetallic laminate (MIL) composites Materials Science and Engineering A. 528: 3134-3146. DOI: 10.1016/J.Msea.2010.12.087 |
0.818 |
|
2011 |
Khalifa HE, Vecchio KS. Thermal stability and crystallization phenomena of low cost Ti-based bulk metallic glass Journal of Non-Crystalline Solids. 357: 3393-3398. DOI: 10.1016/J.Jnoncrysol.2009.08.005 |
0.794 |
|
2010 |
Adharapurapu RR, Jiang F, Bingert JF, Vecchio KS. Influence of cold work and texture on the high-strain-rate response of Nitinol Materials Science and Engineering A. 527: 5255-5267. DOI: 10.1016/J.Msea.2010.04.076 |
0.766 |
|
2010 |
Adharapurapu RR, Jiang F, Vecchio KS. Aging effects on hardness and dynamic compressive behavior of Ti-55Ni (at.%) alloy Materials Science and Engineering A. 527: 1665-1676. DOI: 10.1016/J.Msea.2009.10.069 |
0.778 |
|
2010 |
Kulin RM, Chen PY, Jiang F, McKittrick J, Vecchio KS. Dynamic fracture resilience of elk antler: Biomimetic inspiration for improved crashworthiness Jom. 62: 41-46. DOI: 10.1007/S11837-010-0009-7 |
0.793 |
|
2010 |
Jiang F, Kulin RM, Vecchio KS. Use of Brazilian disk test to determine properties of metallic- intermetallic laminate composites Jom. 62: 35-40. DOI: 10.1007/S11837-010-0008-8 |
0.808 |
|
2010 |
Gray GT, Bourne NK, Vecchio KS, Millett JCF. Influence of anisotropy (crystallographic and microstructural) on spallation in Zr, Ta, HY-100 steel, and 1080 eutectoid steel International Journal of Fracture. 163: 243-258. DOI: 10.1007/S10704-009-9440-6 |
0.363 |
|
2009 |
Jiang F, Vecchio KS. Hopkinson bar loaded fracture experimental technique: A critical review of dynamic fracture toughness tests Applied Mechanics Reviews. 62: 1-39. DOI: 10.1115/1.3124647 |
0.359 |
|
2009 |
Du SW, Aydelotte B, Fondse D, Wei CT, Jiang F, Herbold E, Vecchio K, Meyers MA, Thadhani NN. Explosive compations of intermetallic-forming powder mixtures for fabricating structural energetic materials Aip Conference Proceedings. 1195: 498-501. DOI: 10.1063/1.3295183 |
0.335 |
|
2009 |
Deck CP, Ni C, Vecchio KS, Bandaru PR. The response of carbon nanotube ensembles to fluid flow: Applications to mechanical property measurement and diagnostics Journal of Applied Physics. 106. DOI: 10.1063/1.3238317 |
0.689 |
|
2009 |
Cheney J, Khalifa H, Vecchio K. Modeling the amorphous forming ability of Ti-based alloys with wide supercooled liquid regions and high hardness Materials Science and Engineering: A. 506: 94-100. DOI: 10.1016/J.Msea.2008.11.011 |
0.794 |
|
2009 |
Cheney J, Vecchio K. Evaluation of glass-forming ability in metals using multi-model techniques Journal of Alloys and Compounds. 471: 222-240. DOI: 10.1016/J.Jallcom.2008.03.071 |
0.726 |
|
2009 |
McKee GSB, Deck CP, Vecchio KS. Dimensional control of multi-walled carbon nanotubes in floating-catalyst CVD synthesis Carbon. 47: 2085-2094. DOI: 10.1016/J.Carbon.2009.03.060 |
0.686 |
|
2009 |
Hofmann DC, Kozachkov H, Khalifa HE, Schramm JP, Demetriou MD, Vecchio KS, Johnson WL. Semi-solid induction forging of metallic glass matrix composites Jom. 61: 11-17. DOI: 10.1007/S11837-009-0172-X |
0.789 |
|
2009 |
Dougherty LM, Cerreta EK, Gray GT, Trujillo CP, Lopez MF, Vecchio KS, Kusinski GJ. Mechanical behavior and microstructural development of low-carbon steel and microcomposite steel reinforcement bars deformed under quasi-static and dynamic shear loading Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 40: 1835-1850. DOI: 10.1007/S11661-009-9869-2 |
0.403 |
|
2009 |
Khalifa HE, Vecchio KS. High strength (Ti58Ni28Cu8Si 4Sn2)100-xMox nanoeutectic matrix-β-Ti dendrite, BMG-derived composites with enhanced plasticity and corrosion resistance Advanced Engineering Materials. 11. DOI: 10.1002/Adem.200900148 |
0.801 |
|
2009 |
Deck CP, Ni C, Vecchio KS, Bandaru P. The mechanical response of aligned carbon nanotube mats via transmitted laser intensity measurements Materials Research Society Symposium Proceedings. 1142: 207-212. |
0.681 |
|
2008 |
Vecchio KS. Electron microscopy of shock‐synthesized silicides and aluminides High‐Pressure Science and Technology. 309: 1221-1224. DOI: 10.1063/1.46065 |
0.329 |
|
2008 |
Vecchio KS, Gray GT. Effects of shock loading on a solid‐solution strengthened superalloy High‐Pressure Science and Technology. 309: 1213-1216. DOI: 10.1063/1.46063 |
0.396 |
|
2008 |
Herbold EB, Nesterenko VF, Benson DJ, Cai J, Vecchio KS, Jiang F, Addiss JW, Walley SM, Proud WG. Particle size effect on strength, failure, and shock behavior in polytetrafluoroethylene-Al-W granular composite materials Journal of Applied Physics. 104. DOI: 10.1063/1.3000631 |
0.365 |
|
2008 |
Ni C, Deck C, Vecchio KS, Bandaru PR. Optical determination of the flexural rigidity of carbon nanotube ensembles Applied Physics Letters. 92. DOI: 10.1063/1.2917569 |
0.692 |
|
2008 |
Cai J, Nesterenko VF, Vecchio KS, Jiang F, Herbold EB, Benson DJ, Addiss JW, Walley SM, Proud WG. The influence of metallic particle size on the mechanical properties of polytetraflouroethylene-Al-W powder composites Applied Physics Letters. 92. DOI: 10.1063/1.2832672 |
0.368 |
|
2008 |
Cheney J, Vecchio K. Development of quaternary Fe-based bulk metallic glasses Materials Science and Engineering: A. 492: 230-235. DOI: 10.1016/J.Msea.2008.03.019 |
0.741 |
|
2008 |
Khalifa HE, Cheney JL, Vecchio KS. Effect of Mo-Fe substitution on glass forming ability, thermal stability, and hardness of Fe-C-B-Mo-Cr-W bulk amorphous alloys Materials Science and Engineering A. 490: 221-228. DOI: 10.1016/J.Msea.2008.01.035 |
0.792 |
|
2008 |
Khalifa HE, Cheney JL, Vecchio KS. Effect of Mo-Fe substitution on glass forming ability and thermal stability of Fe-C-B-Mo-Cr-W bulk amorphous alloys Journal of Non-Crystalline Solids. 354: 4550-4555. DOI: 10.1016/J.Jnoncrysol.2008.06.012 |
0.786 |
|
2008 |
Kulin RM, Jaing F, Vecchio KS. Aging and loading rate effects on the mechanical behavior of equine bone Jom. 60: 39-44. DOI: 10.1007/S11837-008-0069-0 |
0.789 |
|
2008 |
Khalifa HE, Vecchio KS. Devitrification and Cooling rate effects on microstructure and mechanical properties in Fe57C9B11Mo12Cr 8W3 bulk metallic glass Advanced Engineering Materials. 10: 1056-1063. DOI: 10.1002/Adem.200800100 |
0.803 |
|
2007 |
Jiang F, Vecchio KS. Experimental investigation of dynamic effects in a two-bar/three-point bend fracture test. The Review of Scientific Instruments. 78: 063903. PMID 17614622 DOI: 10.1063/1.2746630 |
0.356 |
|
2007 |
Deck CP, Flowers J, McKee GSB, Vecchio K. Mechanical behavior of ultralong multiwalled carbon nanotube mats Journal of Applied Physics. 101. DOI: 10.1063/1.2426940 |
0.713 |
|
2007 |
Cheney J, Vecchio K. Prediction of glass-forming compositions using liquidus temperature calculations Materials Science and Engineering: A. 471: 135-143. DOI: 10.1016/J.Msea.2007.02.120 |
0.716 |
|
2007 |
Hofmann DC, Vecchio KS. Thermal history analysis of friction stir processed and submerged friction stir processed aluminum Materials Science and Engineering A. 465: 165-175. DOI: 10.1016/J.Msea.2007.02.056 |
0.316 |
|
2007 |
Lins JFC, Sandim HRZ, Kestenbach HJ, Raabe D, Vecchio KS. A microstructural investigation of adiabatic shear bands in an interstitial free steel Materials Science and Engineering A. 457: 205-218. DOI: 10.1016/J.Msea.2006.12.019 |
0.34 |
|
2007 |
Li T, Jiang F, Olevsky EA, Vecchio KS, Meyers MA. Damage evolution in Ti6Al4V-Al3Ti metal-intermetallic laminate composites Materials Science and Engineering A. 443: 1-15. DOI: 10.1016/J.Msea.2006.05.037 |
0.4 |
|
2007 |
Richeton J, Ahzi S, Vecchio KS, Jiang FC, Makradi A. Modeling and validation of the large deformation inelastic response of amorphous polymers over a wide range of temperatures and strain rates International Journal of Solids and Structures. 44: 7938-7954. DOI: 10.1016/J.Ijsolstr.2007.05.018 |
0.336 |
|
2007 |
Jiang F, Vecchio KS. Fracture of Nitinol under quasistatic and dynamic loading Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2907-2915. DOI: 10.1007/S11661-007-9349-5 |
0.368 |
|
2007 |
Jiang F, Vecchio KS. Dynamic effects in Hopkinson bar four-point bend fracture Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2896-2906. DOI: 10.1007/S11661-007-9301-8 |
0.345 |
|
2007 |
Vecchio KS, Jiang F. Improved pulse shaping to achieve constant strain rate and stress equilibrium in split-Hopkinson pressure bar testing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2655-2665. DOI: 10.1007/S11661-007-9204-8 |
0.363 |
|
2007 |
Brown EN, Willms RB, Gray GT, Rae PJ, Cady CM, Vecchio KS, Flowers J, Martinez MY. Influence of molecular conformation on the constitutive response of polyethylene: A comparison of HDPE, UHMWPE, and PEX Experimental Mechanics. 47: 381-393. DOI: 10.1007/S11340-007-9045-9 |
0.327 |
|
2007 |
Adharapurapu RR, Vecchio KS. Superelasticity in a new bioImplant material: Ni-rich 55NiTi alloy Experimental Mechanics. 47: 365-371. DOI: 10.1007/S11340-006-9004-X |
0.767 |
|
2006 |
McKee GS, Vecchio KS. Thermogravimetric analysis of synthesis variation effects on CVD generated multiwalled carbon nanotubes. The Journal of Physical Chemistry. B. 110: 1179-86. PMID 16471661 DOI: 10.1021/Jp054265H |
0.762 |
|
2006 |
Ni CN, Deck CP, Vecchio KS, Bandaru PR. Carbon nanotube-based fluid flow/shear sensors Materials Research Society Symposium Proceedings. 963: 125-131. DOI: 10.1557/Proc-0963-Q23-03 |
0.684 |
|
2006 |
Richeton J, Ahzi S, Makradi A, Vecchio KS. Constitutive modeling of polymer materials at impact loading rates Journal De Physique. Iv : Jp. 134: 103-107. DOI: 10.1051/Jp4:2006134017 |
0.313 |
|
2006 |
Lin AYM, Meyers MA, Vecchio KS. Mechanical properties and structure of Strombus gigas, Tridacna gigas, and Haliotis rufescens sea shells: A comparative study Materials Science and Engineering C. 26: 1380-1389. DOI: 10.1016/J.Msec.2005.08.016 |
0.415 |
|
2006 |
Adharapurapu RR, Jiang F, Vecchio KS. Dynamic fracture of bovine bone Materials Science and Engineering C. 26: 1325-1332. DOI: 10.1016/J.Msec.2005.08.008 |
0.763 |
|
2006 |
Zhang X, Vecchio KS. Creation of dense hydroxyapatite (synthetic bone) by hydrothermal conversion of seashells Materials Science and Engineering C. 26: 1445-1450. DOI: 10.1016/J.Msec.2005.08.007 |
0.347 |
|
2006 |
Richeton J, Ahzi S, Vecchio KS, Jiang FC, Adharapurapu RR. Influence of temperature and strain rate on the mechanical behavior of three amorphous polymers: Characterization and modeling of the compressive yield stress International Journal of Solids and Structures. 43: 2318-2335. DOI: 10.1016/J.Ijsolstr.2005.06.040 |
0.75 |
|
2006 |
Deck CP, Vecchio K. Prediction of carbon nanotube growth success by the analysis of carbon-catalyst binary phase diagrams Carbon. 44: 267-275. DOI: 10.1016/J.Carbon.2005.07.023 |
0.712 |
|
2006 |
Adharapurapu RR, Jiang F, Vecchio KS, Gray GT. Response of NiTi shape memory alloy at high strain rate: A systematic investigation of temperature effects on tension-compression asymmetry Acta Materialia. 54: 4609-4620. DOI: 10.1016/J.Actamat.2006.05.047 |
0.764 |
|
2006 |
Deck CP, Mckee GSB, Vecchio KS. Synthesis optimization and characterization of multiwalled carbon nanotubes Journal of Electronic Materials. 35: 211-223. DOI: 10.1007/Bf02692438 |
0.706 |
|
2005 |
Deck CP, Vecchio KS. Growth of well-aligned carbon nanotube structures in successive layers. The Journal of Physical Chemistry. B. 109: 12353-7. PMID 16852525 DOI: 10.1021/Jp050417X |
0.696 |
|
2005 |
Lins JFC, Sandim HRZ, Vecchio KS, Raabe D. An EBSD investigation on deformation-induced shear bands in Ti-bearing IF-steel under controlled shock-loading conditions Materials Science Forum. 495: 393-398. DOI: 10.4028/Www.Scientific.Net/Msf.495-497.393 |
0.353 |
|
2005 |
Richeton J, Schlatter G, Vecchio KS, Rémond Y, Ahzi S. A unified model for stiffness modulus of amorphous polymers across transition temperatures and strain rates Polymer. 46: 8194-8201. DOI: 10.1016/J.Polymer.2005.06.103 |
0.319 |
|
2005 |
Hofmann DC, Vecchio KS. Submerged friction stir processing (SFSP): An improved method for creating ultra-fine-grained bulk materials Materials Science and Engineering A. 402: 234-241. DOI: 10.1016/J.Msea.2005.04.032 |
0.317 |
|
2005 |
Deck CP, Vecchio K. Growth mechanism of vapor phase CVD-grown multi-walled carbon nanotubes Carbon. 43: 2608-2617. DOI: 10.1016/J.Carbon.2005.05.012 |
0.702 |
|
2005 |
Vecchio KS. Synthetic multifunctional metallic-intermetallic laminate composites Jom. 57: 25-31. DOI: 10.1007/S11837-005-0229-4 |
0.32 |
|
2005 |
Adharapurapu RR, Vecchio KS, Jiang F, Rohatgi A. Effects of ductile laminate thickness, volume fraction, and orientation on fatigue-crack propagation in Ti-Al3Ti metal-intermetallic laminate composites Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 1595-1608. DOI: 10.1007/S11661-005-0251-8 |
0.781 |
|
2005 |
Adharapurapu RR, Vecchio KS, Rohatgi A, Jiang F. Fracture of Ti-Al3Ti metal-intermetallic laminate composites: Effects of lamination on resistance-curve behavior Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 36: 3217-3236. DOI: 10.1007/S11661-005-0092-5 |
0.789 |
|
2005 |
Jiang F, Rohatgi A, Vecchio KS, Cheney JL. Response to the discussion by I.V. Rokach of the paper entitled: ?Analysis of the dynamic responses for a pre-cracked three-point bend specimen? International Journal of Fracture. 131: 301-307. DOI: 10.1007/S10704-004-7140-9 |
0.698 |
|
2005 |
Li T, Meyers M, Vecchio KS, Olevsky E. An investigation of mechanical behavior and damage evolution of Ti-6Al-4V-Al3Ti Metal Intermetallic Laminate (MIL) composites Tms Annual Meeting. 123-137. |
0.33 |
|
2004 |
Jiang F, Rohatgi A, Vecchio KS, Cheney JL. Analysis of the dynamic responses for a pre-cracked three-point bend specimen International Journal of Fracture. 127: 147-165. DOI: 10.1023/B:Frac.0000035058.03627.30 |
0.711 |
|
2004 |
Jiang F, Vecchio KS, Rohatgi A. Analysis of modified split Hopkinson pressure bar dynamic fracture test using an inertia model International Journal of Fracture. 126: 143-164. DOI: 10.1023/B:Frac.0000026363.05467.2B |
0.361 |
|
2004 |
Fengchun J, Ruitang L, Xiaoxin Z, Vecchio KS, Rohatgi A. Evaluation of dynamic fracture toughness KId by Hopkinson pressure bar loaded instrumented Charpy impact test Engineering Fracture Mechanics. 71: 279-287. DOI: 10.1016/S0013-7944(03)00139-5 |
0.374 |
|
2004 |
Li T, Grignon F, Benson DJ, Vecchio KS, Olevsky EA, Jiang F, Rohatgi A, Schwarz RB, Meyers MA. Modeling the elastic properties and damage evolution in Ti-Al3Ti metal-intermetallic laminate (MIL) composites Materials Science and Engineering A. 374: 10-26. DOI: 10.1016/J.Msea.2003.09.074 |
0.41 |
|
2004 |
Grignon F, Benson D, Vecchio KS, Meyers MA. Explosive welding of aluminum to aluminum: Analysis, computations and experiments International Journal of Impact Engineering. 30: 1333-1351. DOI: 10.1016/J.Ijimpeng.2003.09.049 |
0.337 |
|
2004 |
Jiang F, Rohatgi A, Vecchio KS, Adharapurapu RR. Crack length calculation for bend specimens under static and dynamic loading Engineering Fracture Mechanics. 71: 1971-1985. DOI: 10.1016/J.Engfracmech.2003.10.004 |
0.762 |
|
2004 |
Vecchio KS, Jiang F, Adharapurapu RR. A novel three-point bend test for dynamic fracture toughness measurement Materials Science and Technology. 1: 141-151. |
0.759 |
|
2003 |
Rohatgi A, Harach DJ, Vecchio KS, Harvey KP. Resistance-curve and fracture behavior of Ti-Al3Ti metallic-intermetallic laminate (MIL) composites Acta Materialia. 51: 2933-2957. DOI: 10.1016/S1359-6454(03)00108-3 |
0.79 |
|
2002 |
Rohatgi A, Vecchio KS. The variation of dislocation density as a function of the stacking fault energy in shock-deformed FCC materials Materials Science and Engineering A. 328: 256-266. DOI: 10.1016/S0921-5093(01)01702-6 |
0.314 |
|
2001 |
Pérez-Prado MT, Hines JA, Vecchio KS. Microstructural evolution in adiabatic shear bands in Ta and Ta-W alloys Acta Materialia. 49: 2905-2917. DOI: 10.1016/S1359-6454(01)00215-4 |
0.359 |
|
2001 |
Rohatgi A, Vecchio KS, Gray GT. Metallographic and quantitative analysis of the influence of stacking fault energy on shock-hardening in Cu and Cu-Al alloys Acta Materialia. 49: 427-438. DOI: 10.1016/S1359-6454(00)00335-9 |
0.335 |
|
2001 |
Kassner ME, Perez-Prado MT, Vecchio KS. Internal stress measurements by convergent beam electron diffraction on creep-deformed Al single crystals Materials Science and Engineering A. 319: 730-734. DOI: 10.1016/S0921-5093(01)00953-4 |
0.304 |
|
2001 |
Menig R, Meyers MH, Meyers MA, Vecchio KS. Quasi-static and dynamic mechanical response of Strombus gigas (conch) shells Materials Science and Engineering A. 297: 203-211. DOI: 10.1016/S0921-5093(00)01228-4 |
0.388 |
|
2001 |
Harach DJ, Vecchio KS. Microstructure evolution in metal-intermetallic laminate (MIL) composites synthesized by reactive foil sintering in air Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 1493-1505. DOI: 10.1007/S11661-001-0237-0 |
0.777 |
|
2001 |
Rohatgi A, Vecchio KS, Gray GT. The influence of stacking fault energy on the mechanical behavior of Cu and Cu-al alloys: Deformation twinning, work hardening, and dynamic recovery Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 32: 135-144. DOI: 10.1007/S11661-001-0109-7 |
0.361 |
|
2000 |
Menig R, Meyers MH, Meyers MA, Vecchio KS. Quasi-static and dynamic mechanical response of Haliotis rufescens (abalone) shells Acta Materialia. 48: 2383-2398. DOI: 10.1016/S1359-6454(99)00443-7 |
0.401 |
|
1999 |
Strutt AJ, Vecchio KS. Simultaneous oxidation and sigma-phase formation in a stainless steel Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 355-362. DOI: 10.1007/S11661-999-0324-1 |
0.314 |
|
1999 |
Gray GT, Chen SR, Vecchio KS. Influence of grain size on the constitutive response and substructure evolution of MONEL 400 Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 1235-1247. DOI: 10.1007/S11661-999-0273-8 |
0.322 |
|
1999 |
Levin BF, Vecchio KS, DuPont JN, Marder AR. Modeling solid-particle erosion of ductile alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 30: 1763-1774. DOI: 10.1007/S11661-999-0175-9 |
0.381 |
|
1998 |
Sharma V, Nemat-Nasser S, Vecchio KS. Effect of grain-boundary phase on dynamic compression fatigue in hot-pressed silicon nitride Journal of the American Ceramic Society. 81: 129-139. DOI: 10.1111/J.1151-2916.1998.Tb02304.X |
0.35 |
|
1998 |
Sharma V, Nemat-Nasser S, Vecchio KS. Modeling the strain-rate dependence of fatigue life of hot-pressed silicon nitride Mechanics of Materials. 29: 253-273. DOI: 10.1016/S0167-6636(98)00024-6 |
0.388 |
|
1998 |
Hines JA, Vecchio KS, Ahzi S. A model for microstructure evolution in adiabatic shear bands Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 29: 191-203. DOI: 10.1007/S11661-998-0172-4 |
0.315 |
|
1997 |
Levin BF, Vecchio KS, DuPont JN, Marder AR. Solid Particle Erosion Resistance and High Strain Rate Deformation Behavior of Inconel-625 Alloy Superalloys. 479-488. DOI: 10.7449/1997/Superalloys_1997_479_488 |
0.345 |
|
1997 |
Hines JA, Vecchio KS. Recrystallization kinetics within adiabatic shear bands Acta Materialia. 45: 635-649. DOI: 10.1016/S1359-6454(96)00193-0 |
0.34 |
|
1997 |
Lee BJ, Vecchio KS, Ahzi S, Schoenfeld S. Modeling the mechanical behavior of tantalum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 28: 113-122. DOI: 10.1007/S11661-997-0087-5 |
0.339 |
|
1996 |
Thakur A, Nemat-Nasser S, Vecchio KS. Dynamic Bauschinger effect Acta Materialia. 44: 2797-2807. DOI: 10.1016/1359-6454(95)00385-1 |
0.381 |
|
1996 |
Thakur A, Vecchio KS, Nemat-Nasser S. Bauschinger effect in haynes 230 alloy: Influence of strain rate and temperature Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 27: 1739-1748. DOI: 10.1007/Bf02651923 |
0.347 |
|
1995 |
Kapoor R, Vecchio KS. Deformation behavior and failure mechanisms in particulate reinforced 6061 Al metal-matrix composites Materials Science and Engineering A. 202: 63-75. DOI: 10.1016/0921-5093(95)09808-9 |
0.364 |
|
1995 |
Gray GT, Vecchio KS. Influence of peak pressure and temperature on the structure/property response of shock- loaded Ta and Ta-10W Metallurgical and Materials Transactions A. 26: 2555-2563. DOI: 10.1007/Bf02669413 |
0.371 |
|
1995 |
Vecchio KS, Gray GT. Shock-loading response of 6061- T6 aluminum metal-matrix composites Metallurgical and Materials Transactions A. 26: 2545-2553. DOI: 10.1007/Bf02669412 |
0.398 |
|
1995 |
Vecchio KS, Fitzpatrick MD, Klarstrom D. Influence of subsolvus thermomechanical processing on the low-cycle fatigue properties of haynes 230 alloy Metallurgical and Materials Transactions A. 26: 673-689. DOI: 10.1007/Bf02663917 |
0.377 |
|
1994 |
Chen RW, Vecchio KS. Microstructural characterization of shear band formation in Al-Li alloys Journal De Physique. Iv : Jp. 4. DOI: 10.1051/Jp4:1994871 |
0.366 |
|
1994 |
Vecchio KS, Thakur AM. Effects of shock loading on cobalt-based solid-solution strengthened superalloys Journal De Physique. Iv : Jp. 4. DOI: 10.1051/Jp4:1994856 |
0.369 |
|
1994 |
de Andrade UR, Meyers MA, Chokshi AH, Vecchio KS. Dynamic recrystallization and grain size effects in shock hardened copper Journal De Physique. Iv : Jp. 4. DOI: 10.1051/Jp4:1994855 |
0.334 |
|
1994 |
Vecchio KS. High-strain, high-strain-rate deformation of tantalum and tantalum-tungsten alloys Journal De Physique. Iv : Jp. 4: 301-306. DOI: 10.1051/Jp4:1994845 |
0.358 |
|
1994 |
Vecchio KS, Gray GT. Shock-loading response of 6061-T6 aluminum-alumina metal-matrix composites Journal De Physique. Iv : Jp. 4. DOI: 10.1051/Jp4:1994834 |
0.359 |
|
1994 |
Andrade U, Meyers MA, Vecchio KS, Chokshi AH. Dynamic recrystallization in high-strain, high-strain-rate plastic deformation of copper Acta Metallurgica Et Materialia. 42: 3183-3195. DOI: 10.1016/0956-7151(94)90417-0 |
0.382 |
|
1994 |
Vecchio KS, Yu LH, Meyers MA. Shock synthesis of silicides-I. experimentation and microstructural evolution Acta Metallurgica Et Materialia. 42: 701-714. DOI: 10.1016/0956-7151(94)90268-2 |
0.318 |
|
1994 |
Sharma V, Nemat-Nasser S, Vecchio KS. Dynamic-compression fatigue of hot-pressed silicon-nitride Experimental Mechanics. 34: 315-323. DOI: 10.1007/Bf02325146 |
0.372 |
|
1993 |
Sun Ig Hong, Gray GT, Vecchio KS. Quenching and thermal cycling effects in a 1060-Al matrix-10vol.%Al2O3 particulate reinforced metal matrix composite Materials Science and Engineering A. 171: 181-189. DOI: 10.1016/0921-5093(93)90405-4 |
0.36 |
|
1992 |
Vecchio KS, Lasalvia JC, Meyers MA, Gray GT. Microstructural characterization of self-propagating high-temperature synthesis/ dynamically compacted and hot-pressed titanium carbides Metallurgical Transactions A. 23: 87-97. DOI: 10.1007/Bf02660856 |
0.371 |
|
1991 |
Vecchio KS, Hunt JA, Williams DB. Transmission electron microscope in situ fatigue experiments: A computer-control approach Journal of Electron Microscopy Technique. 17: 351-355. PMID 2045966 DOI: 10.1002/Jemt.1060170309 |
0.436 |
|
1991 |
Borchert AM, Vecchio KS, Stein RD. The use of charging effects in Al/Al2O3 metal-matrix composites as a contrast mechanism in the SEM Scanning. 13: 344-349. DOI: 10.1002/Sca.4950130503 |
0.315 |
|
1989 |
Vecchio KS, Hertzberg RW, Schmidt FE. Fractography of AISI 1140 modified steel under static and cyclic loading conditions Journal of Testing and Evaluation. 17: 267-272. DOI: 10.1520/Jte11127J |
0.39 |
|
1989 |
Hertzberg RW, Vecchio KS, Schmidt FE. Fatigue performance of AISI 1140 modified steel Journal of Testing and Evaluation. 17: 261-266. DOI: 10.1520/Jte11126J |
0.386 |
|
1988 |
Vecchio KS, Williams DB. A non-icosahedral T2 (Al6Li3Cu) phase Philosophical Magazine B: Physics of Condensed Matter; Statistical Mechanics, Electronic, Optical and Magnetic Properties. 57: 535-546. DOI: 10.1080/13642818808208503 |
0.422 |
|
1988 |
Vecchio KS, Williams DB. Convergent beam electron diffraction analysis of the T 1 (Al 2CuLi) phase in Al-Li-Cu alloys Metallurgical Transactions A. 19: 2885-2891. DOI: 10.1007/Bf02647714 |
0.444 |
|
1988 |
Vecchio KS, Williams DB. The apparent 'five-fold' nature of large T 2 (AI 6Li 3Cu) crystals Metallurgical Transactions A. 19: 2875-2884. DOI: 10.1007/Bf02647713 |
0.446 |
|
1988 |
Vecchio KS, Hertzberg RW. The influence of stacking fault energy on ductile fracture micromorphology Journal of Materials Science. 23: 2220-2224. DOI: 10.1007/Bf01115791 |
0.307 |
|
1987 |
Vecchio KS, Williams DB. Experimental conditions affecting coherent bremsstrahlung in X-ray microanalysis Journal of Microscopy. 147: 15-35. DOI: 10.1111/J.1365-2818.1987.Tb02815.X |
0.412 |
|
1987 |
Vecchio KS, Williams DB. Convergent beam electron diffraction study of Al3Zr in Al-Zr AND Al-Li-Zr alloys Acta Metallurgica. 35: 2959-2970. DOI: 10.1016/0001-6160(87)90295-1 |
0.475 |
|
1986 |
Strutt AJ, Vecchio KS, Yu L‐, Meyers MA, Graham RA. Shock Synthesis of Nickel Aluminides High‐Pressure Science and Technology. 309: 1259-1262. DOI: 10.1063/1.46438 |
0.304 |
|
1986 |
Vecchio KS, Hertzberg RW. Analysis of long term reliability of plated-through holes in multilayer interconnection boards Part B: Fatigue results and fracture mechanisms Microelectronics Reliability. 26: 733-751. DOI: 10.1016/0026-2714(86)90017-X |
0.362 |
|
1986 |
Vecchio KS, Hertzberg RW. Analysis of long term reliability of plated-through holes in multilayer interconnection boards Part A: Stress analyses and material characterization Microelectronics Reliability. 26: 715-732. DOI: 10.1016/0026-2714(86)90016-8 |
0.315 |
|
Show low-probability matches. |