Year |
Citation |
Score |
2019 |
Zanuto RdS, Hassui A, Lima F, Dornfeld DA. Environmental impacts-based milling process planning using a life cycle assessment tool Journal of Cleaner Production. 206: 349-355. DOI: 10.1016/J.Jclepro.2018.09.207 |
0.474 |
|
2017 |
Lee YT, Kumaraguru S, Jain S, Robinson S, Helu M, Hatim QY, Rachuri S, Dornfeld D, Saldana CJ, Kumara S. A Classification Scheme for Smart Manufacturing Systems' Performance Metrics. Smart and Sustainable Manufacturing Systems. 1: 52-74. PMID 28785744 DOI: 10.1520/SSMS20160012 |
0.78 |
|
2017 |
Bhinge R, Park J, Law KH, Dornfeld DA, Helu M, Rachuri S. Towards a generalized energy prediction model for machine tools. Journal of Manufacturing Science and Engineering. 139. PMID 28652687 DOI: 10.1115/1.4034933 |
0.763 |
|
2017 |
Stricker N, Micali M, Dornfeld D, Lanza G. Considering Interdependencies of KPIs – Possible Resource Efficiency and Effectiveness Improvements Procedia Manufacturing. 8: 300-307. DOI: 10.1016/J.Promfg.2017.02.038 |
0.395 |
|
2016 |
Dornfeld DA, Arinez J, Haapala KR, Helu M. Guest Editorial: Special Issue: Sustainable Manufacturing Journal of Manufacturing Science and Engineering-Transactions of the Asme. 138: 100301. DOI: 10.1115/1.4034550 |
0.745 |
|
2016 |
Mirkouei A, Bhinge R, McCoy C, Haapala KR, Dornfeld DA. A Pedagogical Module Framework to Improve Scaffolded Active Learning in Manufacturing Engineering Education Procedia Manufacturing. 5: 1128-1142. DOI: 10.1016/J.Promfg.2016.08.088 |
0.328 |
|
2016 |
Sutherland JW, Richter JS, Hutchins MJ, Dornfeld D, Dzombak R, Mangold J, Robinson S, Hauschild MZ, Bonou A, Schönsleben P, Friemann F. The role of manufacturing in affecting the social dimension of sustainability Cirp Annals-Manufacturing Technology. 65: 689-712. DOI: 10.1016/J.Cirp.2016.05.003 |
0.739 |
|
2015 |
Hutchins MJ, Bhinge R, Micali MK, Robinson SL, Sutherland JW, Dornfeld D. Framework for Identifying Cybersecurity Risks in Manufacturing Procedia Manufacturing. 1: 47-63. DOI: 10.1016/J.Promfg.2015.09.060 |
0.682 |
|
2015 |
Mangold J, Cristobal K, Mars C, Dornfeld D. Assessment Framework and Material Flow Analysis of Material Recovery Facilities Within the U.S. to Track Consumer Electronics by Product Category Procedia Cirp. 29: 556-561. DOI: 10.1016/J.Procir.2015.02.202 |
0.762 |
|
2015 |
Bhinge R, Srinivasan A, Robinson S, Dornfeld D. Data-intensive Life Cycle Assessment (DILCA) for Deteriorating Products Procedia Cirp. 29: 396-401. DOI: 10.1016/J.Procir.2015.02.192 |
0.663 |
|
2015 |
Lieshout KGV, Bayley C, Akinlabi SO, Rabenau Lv, Dornfeld D. Leveraging Life Cycle Assessment to Evaluate Environmental Impacts of Green Cleaning Products Procedia Cirp. 29: 372-377. DOI: 10.1016/J.Procir.2015.02.063 |
0.386 |
|
2015 |
Bhinge R, Moser R, Moser E, Lanza G, Dornfeld D. Sustainability optimization for global supply chain decision-making Procedia Cirp. 26: 323-328. DOI: 10.1016/J.Procir.2014.07.105 |
0.328 |
|
2015 |
Diaz-Elsayed N, Dornfeld D, Horvath A. A comparative analysis of the environmental impacts of machine tool manufacturing facilities Journal of Cleaner Production. 95: 223-231. DOI: 10.1016/J.Jclepro.2015.02.047 |
0.811 |
|
2015 |
Gao R, Wang L, Teti R, Dornfeld D, Kumara S, Mori M, Helu M. Cloud-enabled prognosis for manufacturing Cirp Annals. 64: 749-772. DOI: 10.1016/J.Cirp.2015.05.011 |
0.745 |
|
2014 |
Walczak KA, Hutchins MJ, Dornfeld D. Energy system design to maximize net energy production considering uncertainty in scale-up: A case study in artificial photosynthesis Procedia Cirp. 15: 306-312. DOI: 10.1016/J.Procir.2014.06.032 |
0.369 |
|
2014 |
Meier H, Ninomiya K, Dornfeld D, Schulze V. Hard broaching of case hardened SAE 5120 Procedia Cirp. 14: 60-65. DOI: 10.1016/J.Procir.2014.03.074 |
0.344 |
|
2014 |
Noble J, Walczak K, Dornfeld D. Rapid Tooling Injection Molded Prototypes: A Case Study in Artificial Photosynthesis Technology☆ Procedia Cirp. 14: 251-256. DOI: 10.1016/J.Procir.2014.03.035 |
0.388 |
|
2014 |
Helu M, Chien J, Dornfeld D. In-situ CMP Endpoint Detection Using Acoustic Emission Procedia Cirp. 14: 454-459. DOI: 10.1016/J.Procir.2014.03.025 |
0.733 |
|
2014 |
Bhandari B, Hong Y, Yoon H, Moon J, Pham M, Lee G, Huang Y, Linke BS, Dornfeld D, Ahn S. Development of a micro-drilling burr-control chart for PCB drilling Precision Engineering. 38: 221-229. DOI: 10.1016/J.Precisioneng.2013.07.010 |
0.671 |
|
2014 |
Dornfeld DA. Moving towards green and sustainable manufacturing International Journal of Precision Engineering and Manufacturing-Green Technology. 1: 63-66. DOI: 10.1007/S40684-014-0010-7 |
0.446 |
|
2014 |
Lee H, Dornfeld DA, Jeong H. Mathematical Model-Based Evaluation Methodology for Environmental Burden of Chemical Mechanical Planarization Process International Journal of Precision Engineering and Manufacturing-Green Technology. 1: 11-15. DOI: 10.1007/S40684-014-0002-7 |
0.389 |
|
2013 |
Lee HS, Jeong HD, Dornfeld DA. Semi-empirical material removal rate distribution model for SiO2 chemical mechanical polishing (CMP) processes Precision Engineering. 37: 483-490. DOI: 10.1016/J.Precisioneng.2012.12.006 |
0.313 |
|
2013 |
Hutchins MJ, Robinson SL, Dornfeld D. Understanding life cycle social impacts in manufacturing: A processed-based approach Transactions of the North American Manufacturing Research Institution of Sme. 41: 629-637. DOI: 10.1016/J.Jmsy.2013.05.008 |
0.703 |
|
2013 |
Linke BS, Corman GJ, Dornfeld DA, Tönissen S. Sustainability Indicators for Discrete Manufacturing Processes Applied to Grinding Technology Journal of Manufacturing Systems. 32: 556-563. DOI: 10.1016/J.Jmsy.2013.05.005 |
0.718 |
|
2013 |
Diaz-Elsayed N, Jondral A, Greinacher S, Dornfeld D, Lanza G. Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments Cirp Annals-Manufacturing Technology. 62: 475-478. DOI: 10.1016/J.Cirp.2013.03.066 |
0.804 |
|
2012 |
Diaz N, Ninomiya K, Noble J, Dornfeld D. Environmental Impact Characterization of Milling and Implications for Potential Energy Savings in Industry Procedia Cirp. 1: 518-523. DOI: 10.1016/J.Procir.2012.04.092 |
0.455 |
|
2012 |
Linke BS, Dornfeld DA. Application of axiomatic design principles to identify more sustainable strategies for grinding Journal of Manufacturing Systems. 31: 412-419. DOI: 10.1016/J.Jmsy.2012.07.007 |
0.752 |
|
2012 |
Duflou JR, Sutherland JW, Dornfeld D, Herrmann C, Jeswiet J, Kara S, Hauschild M, Kellens K. Towards Energy and Resource Efficient Manufacturing: A Processes and Systems Approach Cirp Annals-Manufacturing Technology. 61: 587-609. DOI: 10.1016/J.Cirp.2012.05.002 |
0.399 |
|
2012 |
Yuan C, Zhai Q, Dornfeld D. A three dimensional system approach for environmentally sustainable manufacturing Cirp Annals - Manufacturing Technology. 61: 39-42. DOI: 10.1016/J.Cirp.2012.03.105 |
0.421 |
|
2012 |
Helu M, Behmann B, Meier H, Dornfeld D, Lanza G, Schulze V. Impact of green machining strategies on achieved surface quality Cirp Annals-Manufacturing Technology. 61: 55-58. DOI: 10.1016/J.Cirp.2012.03.092 |
0.76 |
|
2012 |
Linke B, Huang Y, Dornfeld D. Establishing Greener Products and Manufacturing Processes International Journal of Precision Engineering and Manufacturing. 13: 1029-1036. DOI: 10.1007/S12541-012-0134-Z |
0.715 |
|
2011 |
Haapala KR, Zhao F, Camelio J, Sutherland JW, Skerlos SJ, Dornfeld DA, Jawahir IS, Zhang HC, Clarens AF. A review of engineering research in sustainable manufacturing Asme 2011 International Manufacturing Science and Engineering Conference, Msec 2011. 2: 599-619. DOI: 10.1115/1.4024040 |
0.43 |
|
2011 |
Boyd S, Horvath A, Dornfeld D. Life-Cycle Assessment of NAND Flash Memory Ieee Transactions On Semiconductor Manufacturing. 24: 117-124. DOI: 10.1109/Tsm.2010.2087395 |
0.664 |
|
2011 |
Choi S, Doyle F, Dornfeld D. A Model of Material Removal and Post Process Surface Topography for Copper CMP Procedia Engineering. 19: 73-80. DOI: 10.1016/J.Proeng.2011.11.082 |
0.327 |
|
2011 |
Kong D, Choi S, Yasui Y, Pavanaskar S, Dornfeld D, Wright P. Software-based tool path evaluation for environmental sustainability Transactions of the North American Manufacturing Research Institution of Sme. 39: 198-206. DOI: 10.1016/J.Jmsy.2011.08.005 |
0.68 |
|
2011 |
Min S, Lidde J, Raue N, Dornfeld D. Acoustic emission based tool contact detection for ultra-precision machining Cirp Annals-Manufacturing Technology. 60: 141-144. DOI: 10.1016/J.Cirp.2011.03.079 |
0.546 |
|
2011 |
Helu M, Vijayaraghavan A, Dornfeld D. Evaluating the relationship between use phase environmental impacts and manufacturing process precision Cirp Annals - Manufacturing Technology. 60: 49-52. DOI: 10.1016/J.Cirp.2011.03.020 |
0.805 |
|
2011 |
Diaz N, Redelsheimer E, Dornfeld D. Energy Consumption Characterization and Reduction Strategies for Milling Machine Tool Use Laboratory For Manufacturing and Sustainability. 263-267. DOI: 10.1007/978-3-642-19692-8_46 |
0.426 |
|
2010 |
Inada A, Ohmori H, Min S, Dornfeld D. Investigation of the Effects of an Electrolytic Coolant with a Nano Carbon Additive in Diamond Micro Cutting on Ferrous Materials Journal of Advanced Mechanical Design Systems and Manufacturing. 4: 1076-1083. DOI: 10.1299/Jamdsm.4.1076 |
0.502 |
|
2010 |
Yuan CY, Dornfeld DA. A schematic method for sustainable material selection of toxic chemicals in design and manufacturing Journal of Mechanical Design, Transactions of the Asme. 132: 0910141-0910147. DOI: 10.1115/1.4002199 |
0.348 |
|
2010 |
Yuan CY, Dornfeld DA. Integrated sustainability analysis of atomic layer deposition for microelectronics manufacturing Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0309181-0309187. DOI: 10.1115/1.4001686 |
0.355 |
|
2010 |
Boyd S, Horvath A, Dornfeld D. Life-cycle assessment of computational logic produced from 1995 through 2010 Environmental Research Letters. 5: 14011. DOI: 10.1088/1748-9326/5/1/014011 |
0.654 |
|
2010 |
Vijayaraghavan A, Sodemann A, Hoover A, Rhett Mayor J, Dornfeld D. Trajectory generation in high-speed, high-precision micromilling using subdivision curves International Journal of Machine Tools and Manufacture. 50: 394-403. DOI: 10.1016/J.Ijmachtools.2009.10.010 |
0.675 |
|
2010 |
Teti R, Jemielniak K, O'Donnell G, Dornfeld D. Advanced monitoring of machining operations Cirp Annals - Manufacturing Technology. 59: 717-739. DOI: 10.1016/J.Cirp.2010.05.010 |
0.382 |
|
2010 |
Vijayaraghavan A, Dornfeld D. Automated energy monitoring of machine tools Cirp Annals - Manufacturing Technology. 59: 21-24. DOI: 10.1016/J.Cirp.2010.03.042 |
0.709 |
|
2010 |
Dornfeld D, Min S. A Review of Burr Formation in Machining Laboratory For Manufacturing and Sustainability. 3-11. DOI: 10.1007/978-3-642-00568-8_1 |
0.562 |
|
2009 |
Boyd SB, Horvath A, Dornfeld D. Life-cycle energy demand and global warming potential of computational logic. Environmental Science & Technology. 43: 7303-9. PMID 19848138 DOI: 10.1021/Es901514N |
0.657 |
|
2009 |
Dornfeld D. Opportunities and Challenges to Sustainable Manufacturing and CMP Mrs Proceedings. 1157. DOI: 10.1557/Proc-1157-E03-08 |
0.459 |
|
2009 |
Reich-Weiser C, Vijayaraghavan A, Dornfeld DA. Metrics for sustainable manufacturing Proceedings of the Asme International Manufacturing Science and Engineering Conference, Msec2008. 1: 327-335. DOI: 10.1115/Msec_Icmp2008-72223 |
0.782 |
|
2009 |
Reich-Weiser C, Dornfeld D. A discussion of greenhouse gas emission tradeoffs and water scarcity within the supply chain Journal of Manufacturing Systems. 28: 23-27. DOI: 10.1016/J.Jmsy.2009.04.002 |
0.756 |
|
2009 |
Vijayaraghavan A, Hoover AM, Hartnett J, Dornfeld DA. Improving endmilling surface finish by workpiece rotation and adaptive toolpath spacing International Journal of Machine Tools and Manufacture. 49: 89-98. DOI: 10.1016/J.Ijmachtools.2008.07.015 |
0.704 |
|
2009 |
Aurich JC, Dornfeld D, Arrazola PJ, Franke V, Leitz L, Min S. Burrs—Analysis, control and removal Cirp Annals-Manufacturing Technology. 58: 519-542. DOI: 10.1016/J.Cirp.2009.09.004 |
0.539 |
|
2009 |
Garg S, Dornfeld D, Berger K. Formulation of the Chip Cleanability Mechanics from fluid transport Laboratory For Manufacturing and Sustainability. 229-235. DOI: 10.1007/978-3-642-00568-8_25 |
0.347 |
|
2009 |
Arbelaez D, Zohdi TI, Dornfeld DA. On impinging near-field granular jets International Journal For Numerical Methods in Engineering. 80: 815-845. DOI: 10.1002/Nme.2573 |
0.527 |
|
2008 |
Krishnan N, Boyd S, Somani A, Raoux S, Clark D, Dornfeld D. A hybrid life cycle inventory of nano-scale semiconductor manufacturing. Environmental Science & Technology. 42: 3069-75. PMID 18497168 DOI: 10.1021/Es071174K |
0.805 |
|
2008 |
Childs THC, Dornfeld D, Lee D-, Min S, Sekiya K, Tezuka R, Yamane Y. The influence of cutting edge sharpness on surface finish in facing with round nosed cutting tools Cirp Journal of Manufacturing Science and Technology. 1: 70-75. DOI: 10.1016/J.Cirpj.2008.09.001 |
0.533 |
|
2008 |
Childs THC, Sekiya K, Tezuka R, Yamane Y, Dornfeld D, Lee DE, Min S, Wright PK. Surface finishes from turning and facing with round nosed tools Cirp Annals - Manufacturing Technology. 57: 89-92. DOI: 10.1016/J.Cirp.2008.03.121 |
0.537 |
|
2008 |
Min S, Sangermann H, Mertens C, Dornfeld D. A study on initial contact detection for precision micro-mold and surface generation of vertical side walls in micromachining Cirp Annals-Manufacturing Technology. 57: 109-112. DOI: 10.1016/J.Cirp.2008.03.068 |
0.543 |
|
2008 |
Arbelaez D, Zohdi TI, Dornfeld DA. Modeling and simulation of material removal with particulate flows Computational Mechanics. 42: 749-759. DOI: 10.1007/S00466-008-0273-3 |
0.522 |
|
2007 |
Vijayaraghavan A, Dornfeld DA. Automated drill modeling for drilling process simulation Journal of Computing and Information Science in Engineering. 7: 276-282. DOI: 10.1115/1.2768091 |
0.675 |
|
2007 |
Zhang TW, Dornfeld DA. Energy Use per Worker-Hour: Evaluating the Contribution of Labor to Manufacturing Energy Use Laboratory For Manufacturing and Sustainability. 189-193. DOI: 10.1007/978-1-84628-935-4_33 |
0.358 |
|
2006 |
Yuan CY, Zhang T, Rangarajan A, Dornfeld D, Ziemba B, Whitbeck R. A decision-based analysis of compressed air usage patterns in automotive manufacturing Journal of Manufacturing Systems. 25: 293-300. DOI: 10.1016/S0278-6125(06)80241-4 |
0.643 |
|
2006 |
Min S, Dornfeld D, Inasaki I, Ohmori H, Lee D, Deichmueller M, Yasuda T, Niwa K. Variation in Machinability of Single Crystal Materials in Micromachining Cirp Annals. 55: 103-106. DOI: 10.1016/S0007-8506(07)60376-X |
0.547 |
|
2006 |
Lee DE, Hwang I, Valente CMO, Oliveira JFG, Dornfeld DA. Precision manufacturing process monitoring with acoustic emission International Journal of Machine Tools & Manufacture. 46: 176-188. DOI: 10.1016/J.Ijmachtools.2005.04.001 |
0.417 |
|
2006 |
Dornfeld D, Min S, Takeuchi Y. Recent Advances in Mechanical Micromachining Cirp Annals-Manufacturing Technology. 55: 745-768. DOI: 10.1016/J.Cirp.2006.10.006 |
0.587 |
|
2005 |
Ávila M, Gardner J, Reich-Weiser C, Tripathi S, Vijayaraghavan A, Dornfeld D. Strategies for burr minimization and cleanability in aerospace and automotive manufacturing Sae Technical Papers. DOI: 10.4271/2005-01-3327 |
0.755 |
|
2005 |
Chu CH, Dornfeld D. Geometric approaches for reducing burr formation in planar milling by avoiding tool exits Journal of Manufacturing Processes. 7: 182-195. DOI: 10.1016/S1526-6125(05)70095-5 |
0.618 |
|
2005 |
Iturrospe A, Dornfeld D, Atxa V, Abete JM. Bicepstrum based blind identification of the acoustic emission (AE) signal in precision turning Mechanical Systems and Signal Processing. 19: 447-466. DOI: 10.1016/J.Ymssp.2003.12.006 |
0.31 |
|
2005 |
Lee K, Dornfeld DA. Micro-burr formation and minimization through process control Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 29: 246-252. DOI: 10.1016/J.Precisioneng.2004.09.002 |
0.781 |
|
2004 |
Choi J, Dornfeld DA. Modeling of Pattern Density Dependent Pressure Non-Uniformity at a Die Scale for ILD Chemical Mechanical Planarization Mrs Proceedings. 816. DOI: 10.1557/Proc-816-K4.4 |
0.506 |
|
2004 |
Krishnan N, Raoux S, Dornfeld D. Quantifying the environmental footprint of semiconductor equipment using the environmental value systems analysis (EnV-S) Ieee Transactions On Semiconductor Manufacturing. 17: 554-561. DOI: 10.1109/Tsm.2004.835705 |
0.802 |
|
2004 |
Rangarajan A, Dornfeld D. Efficient Tool Paths and Part Orientation for Face Milling Cirp Annals. 53: 73-76. DOI: 10.1016/S0007-8506(07)60648-9 |
0.651 |
|
2003 |
Nakao Y, Dornfeld DA. Improvement of machining accuracy using AE feedback control. Journal of the Japan Society For Precision Engineering. 69: 369-374. DOI: 10.2493/Jjspe.69.369 |
0.332 |
|
2003 |
Min S, Dornfeld DA, Nakao Y. Influence of Exit Surface Angle on Drilling Burr Formation Journal of Manufacturing Science and Engineering-Transactions of the Asme. 125: 637-644. DOI: 10.1115/1.1596573 |
0.468 |
|
2003 |
Luo J, Dornfeld DA. Effects of abrasive size distribution in chemical mechanical planarization: modeling and verification Ieee Transactions On Semiconductor Manufacturing. 16: 469-476. DOI: 10.1109/Tsm.2003.815199 |
0.318 |
|
2003 |
Kumar S, Dornfeld D. Basic Approach to a Prediction System for Burr Formation in Face Milling Journal of Manufacturing Processes. 5: 127-142. DOI: 10.1016/S1526-6125(03)70048-6 |
0.399 |
|
2003 |
Chung S, Im Y, Kim H, Jeong H, Dornfeld DA. Evaluation of micro-replication technology using silicone rubber molds and its applications International Journal of Machine Tools & Manufacture. 43: 1337-1345. DOI: 10.1016/S0890-6955(03)00164-0 |
0.357 |
|
2003 |
Nakao Y, Dornfeld DA. Diamond turning using position and AE dual feedback control system Precision Engineering-Journal of the International Societies For Precision Engineering and Nanotechnology. 27: 117-124. DOI: 10.1016/S0141-6359(02)00189-7 |
0.323 |
|
2003 |
Dornfeld DA, Oliveira JFG, Lee D, Valente CMO. Analysis of Tool and Workpiece Interaction in Diamond Turning Using Graphical Analysis of Acoustic Emission Cirp Annals. 52: 479-482. DOI: 10.1016/S0007-8506(07)60630-1 |
0.379 |
|
2003 |
Evans C, Paul E, Dornfeld D, Lucca D, Byrne G, Tricard M, Klocke F, Dambon O, Mullany B. Material Removal Mechanisms in Lapping and Polishing Cirp Annals. 52: 611-633. DOI: 10.1016/S0007-8506(07)60207-8 |
0.56 |
|
2003 |
Byrne G, Dornfeld D, Denkena B. Advancing Cutting Technology Cirp Annals. 52: 483-507. DOI: 10.1016/S0007-8506(07)60200-5 |
0.436 |
|
2003 |
Dornfeld DA, Lee Y, Chang A. Monitoring of ultraprecision machining processes The International Journal of Advanced Manufacturing Technology. 21: 571-578. DOI: 10.1007/S00170-002-1294-2 |
0.406 |
|
2002 |
Kim J, Dornfeld DA. Development of an Analytical Model for Drilling Burr Formation in Ductile Materials Journal of Engineering Materials and Technology-Transactions of the Asme. 124: 192-198. DOI: 10.1115/1.1429937 |
0.321 |
|
2002 |
Park IW, Ahn S, Dornfeld DA. Probabilistic Prediction Of Burr Patterns Of 1045 Carbon Steel In Face Milling Machining Science and Technology. 6: 151-170. DOI: 10.1081/Mst-120005954 |
0.304 |
|
2002 |
Lee Y, Chang AK, Dornfeld DA. Acoustic emission monitoring for the diamond machining of oxygen-free high-conductivity copper Journal of Materials Processing Technology. 127: 199-205. DOI: 10.1016/S0924-0136(02)00126-7 |
0.357 |
|
2001 |
Lee SH, Dornfeld DA. Precision Laser Deburring Journal of Manufacturing Science and Engineering-Transactions of the Asme. 123: 601-608. DOI: 10.1115/1.1381007 |
0.317 |
|
2001 |
Lee SH, Dornfeld DA. Precision Laser Deburring and Acoustic Emission Feedback Journal of Manufacturing Science and Engineering-Transactions of the Asme. 123: 356-364. DOI: 10.1115/1.1346689 |
0.319 |
|
2001 |
Luo J, Dornfeld DA. Material removal mechanism in chemical mechanical polishing: theory and modeling Ieee Transactions On Semiconductor Manufacturing. 14: 112-133. DOI: 10.1109/66.920723 |
0.328 |
|
2001 |
Min S, Dornfeld DA, Kim J, Shyu B. Finite element modeling of burr formation in metal cutting Machining Science and Technology. 5: 307-322. DOI: 10.1081/Mst-100108617 |
0.493 |
|
2001 |
Min S, Kim J, Dornfeld DA. Development of a drilling burr control chart for low alloy steel, AISI 4118 Journal of Materials Processing Technology. 113: 4-9. DOI: 10.1016/S0924-0136(01)00589-1 |
0.503 |
|
2001 |
Kim J, Min S, Dornfeld DA. Optimization and control of drilling burr formation of AISI 304L and AISI 4118 based on drilling burr control charts International Journal of Machine Tools & Manufacture. 41: 923-936. DOI: 10.1016/S0890-6955(00)00131-0 |
0.5 |
|
2001 |
Kim J, Dornfeld DA. Cost estimation of drilling operations by a Drilling Burr Control Chart and Bayesian statistics Journal of Manufacturing Systems. 20: 89-97. DOI: 10.1016/S0278-6125(01)80032-7 |
0.334 |
|
2001 |
Oliveira JFGd, Dornfeld D. Application of AE Contact Sensing in Reliable Grinding Monitoring Cirp Annals. 50: 217-220. DOI: 10.1016/S0007-8506(07)62108-8 |
0.319 |
|
2000 |
Hashimura M, Ueda K, Manabe K, Dornfeld DA. Effect of In-plane Exit and Radial Rake Angle on Burr Formation in Face Milling Journal of the Japan Society For Precision Engineering. 66: 85-90. DOI: 10.2493/Jjspe.66.85 |
0.338 |
|
2000 |
Hashimura M, Ueda K, Manabe K, Dornfeld DA. Analysis of Burr Formation in Orthogonal Cutting. Journal of the Japan Society For Precision Engineering. 66: 218-223. DOI: 10.2493/Jjspe.66.218 |
0.382 |
|
2000 |
Park IW, Dornfeld DA. A Study of Burr Formation Processes Using the Finite Element Method: Part II—The Influences of Exit Angle, Rake Angle, and Backup Material on Burr Formation Processes Journal of Engineering Materials and Technology-Transactions of the Asme. 122: 229-237. DOI: 10.1115/1.482792 |
0.396 |
|
2000 |
Park IW, Dornfeld DA. A Study of Burr Formation Processes Using the Finite Element Method: Part I Journal of Engineering Materials and Technology-Transactions of the Asme. 122: 221-228. DOI: 10.1115/1.482791 |
0.31 |
|
2000 |
Chang YP, Hashimura M, Dornfeld DA. An investigation of material removal mechanisms in lapping with grain size transition Journal of Manufacturing Science and Engineering-Transactions of the Asme. 122: 413-419. DOI: 10.1115/1.1286471 |
0.318 |
|
2000 |
Guo YB, Dornfeld DA. Finite Element Modeling of Burr Formation Process in Drilling 304 Stainless Steel Journal of Manufacturing Science and Engineering-Transactions of the Asme. 122: 612-619. DOI: 10.1115/1.1285885 |
0.336 |
|
2000 |
Chu CH, Dornfeld D. Tool path planning for avoiding exit burrs Journal of Manufacturing Processes. 2: 116-123. DOI: 10.1016/S1526-6125(00)70019-3 |
0.627 |
|
1999 |
Hashimura M, Dornfeld DA. Proposal of a Burr Classification Method Based on the Formation Mechanisms in Face Milling. (2nd Report). Application of the Proposed Method for Side, Top, Entrance and Entrance Side Burrs. Journal of the Japan Society For Precision Engineering. 65: 1002-1007. DOI: 10.2493/Jjspe.65.1002 |
0.342 |
|
1999 |
Hashimura M, Chang YP, Dornfeld D. Analysis of Burr Formation Mechanism in Orthogonal Cutting Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 1-7. DOI: 10.1115/1.2830569 |
0.414 |
|
1999 |
Hashimura M, Hassamontr J, Dornfeld DA. Effect of In-Plane Exit Angle and Rake Angles on Burr Height and Thickness in Face Milling Operation Journal of Manufacturing Science and Engineering-Transactions of the Asme. 121: 13-19. DOI: 10.1115/1.2830566 |
0.358 |
|
1999 |
Dornfeld DA, Kim JS, Dechow H, Hewson J, Chen LJ. Drilling Burr Formation in Titanium Alloy, Ti-6AI-4V Cirp Annals. 48: 73-76. DOI: 10.1016/S0007-8506(07)63134-5 |
0.33 |
|
1998 |
Hashimura M, Dornfeld DA. Effect of Axial Rake Angle on Burr Formation in Milling. Journal of the Japan Society For Precision Engineering. 64: 1658-1663. DOI: 10.2493/Jjspe.64.1658 |
0.34 |
|
1998 |
Jiaa CL, Dornfeld DA. A self-organizing approach to the prediction and detection of tool wear Isa Transactions. 37: 239-255. DOI: 10.1016/S0019-0578(98)00035-4 |
0.37 |
|
1998 |
Luttervelt CAv, Childs THC, Jawahir IS, Klocke F, Venuvinod PK, Altintas Y, Armarego E, Dornfeld D, Grabec I, Leopold J, Lindstrom B, Lucca D, Obikawa T, Shirakashi, Sato H. Present Situation and Future Trends in Modelling of Machining Operations Progress Report of the CIRP Working Group ‘Modelling of Machining Operations’ Cirp Annals. 47: 587-626. DOI: 10.1016/S0007-8506(07)63244-2 |
0.553 |
|
1998 |
Tang J, Dornfeld D, Pangrle SK, Dangca A. In-process detection of microscratching during CMP using acoustic emission sensing technology Journal of Electronic Materials. 27: 1099-1103. DOI: 10.1007/S11664-998-0144-X |
0.353 |
|
1997 |
Narayanaswami R, Dornfeld D. Burr Minimization in Face Milling: A Geometric Approach Journal of Manufacturing Science and Engineering-Transactions of the Asme. 119: 170-177. DOI: 10.1115/1.2831092 |
0.363 |
|
1997 |
Stein JM, Dornfeld DA. Burr Formation in Drilling Miniature Holes Cirp Annals. 46: 63-66. DOI: 10.1016/S0007-8506(07)60776-8 |
0.315 |
|
1996 |
Chern G, Dornfeld DA. Burr/Breakout Model Development and Experimental Verification Journal of Engineering Materials and Technology-Transactions of the Asme. 118: 201-206. DOI: 10.1115/1.2804887 |
0.348 |
|
1996 |
Chang YP, Hashimura M, Dornfeld DA. An Investigation of the AE Signals in the Lapping Process Cirp Annals. 45: 331-334. DOI: 10.1016/S0007-8506(07)63074-1 |
0.351 |
|
1996 |
Ko S, Dornfeld DA. Burr formation and fracture in oblique cutting Journal of Materials Processing Technology. 62: 24-36. DOI: 10.1016/0924-0136(95)02125-6 |
0.322 |
|
1996 |
Leem CS, Dornfeld DA. Design And Implementation Of Sensor-Based Tool-Wear Monitoring Systems Mechanical Systems and Signal Processing. 10: 439-458. DOI: 10.1006/Mssp.1996.0031 |
0.313 |
|
1995 |
Leem CS, Dornfeld DA, Dreyfus SE. A Customized Neural Network for Sensor Fusion in On-Line Monitoring of Cutting Tool Wear Journal of Engineering For Industry. 117: 152-159. DOI: 10.1115/1.2803289 |
0.304 |
|
1995 |
Hashimura M, Ueda K, Dornfeld D, Manabe K. Analysis of Three-Dimensional Burr Formation in Oblique Cutting Cirp Annals. 44: 27-30. DOI: 10.1016/S0007-8506(07)62268-9 |
0.354 |
|
1995 |
Byrne G, Dornfeld D, Inasaki I, Ketteler G, König W, Teti R. Tool Condition Monitoring (TCM) — The Status of Research and Industrial Application Cirp Annals. 44: 541-567. DOI: 10.1016/S0007-8506(07)60503-4 |
0.361 |
|
1994 |
Oliveira JFGd, Dornfeld DA. Dimensional Characterization of Grinding Wheel Surface through Acoustic Emission Cirp Annals. 43: 291-294. DOI: 10.1016/S0007-8506(07)62216-1 |
0.323 |
|
1994 |
Diniz AE, Liu JJ, Dornfeld da. Correlating tool life, tool wear and surface roughness by monitoring acoustic emission in finish turning Ndt & E International. 27: 213-214. DOI: 10.1016/0963-8695(94)90499-5 |
0.351 |
|
1993 |
Dornfeld D, Liu JJB. Abrasive Texturing and Burnishing Process Monitoring Using Acoustic Emission Cirp Annals-Manufacturing Technology. 42: 397-400. DOI: 10.1016/S0007-8506(07)62470-6 |
0.341 |
|
1992 |
Dornfeld DA. Acoustic Emission Feedback for Precision Deburring Cirp Annals. 41: 93-96. DOI: 10.1016/S0007-8506(07)61160-3 |
0.358 |
|
1992 |
Dornfeld D. Application of acoustic emission techniques in manufacturing Ndt & E International. 25: 259-269. DOI: 10.1016/0963-8695(92)90636-U |
0.431 |
|
1992 |
Jiaa CL, Dornfeld DA. Detection of tool wear using gradient adaptive lattice and pattern recognition analysis Mechanical Systems and Signal Processing. 6: 97-120. DOI: 10.1016/0888-3270(92)90059-R |
0.329 |
|
1992 |
Diniz AE, Liu JJ, Dornfeld DA. Correlating tool life, tool wear and surface roughness by monitoring acoustic emission in finish turning Wear. 152: 395-407. DOI: 10.1016/0043-1648(92)90135-U |
0.37 |
|
1991 |
Rangwala S, Dornfeld D. A study of acoustic emission generated during orthogonal metal cutting-1: Energy analysis International Journal of Mechanical Sciences. 33: 471-487. DOI: 10.1016/0020-7403(91)90082-E |
0.385 |
|
1990 |
Jiaa CL, Dornfeld DA. Experimental studies of sliding friction and wear via acoustic emission signal analysis Wear. 139: 403-424. DOI: 10.1016/0043-1648(90)90059-J |
0.355 |
|
1989 |
Liang SY, Dornfeld DA. Tool Wear Detection Using Time Series Analysis of Acoustic Emission Journal of Engineering For Industry. 111: 199-205. DOI: 10.1115/1.3188750 |
0.395 |
|
1987 |
Diei EN, Dornfeld DA. Acoustic Emission Sensing of Tool Wear in Face Milling Journal of Engineering For Industry. 109: 234-240. DOI: 10.1115/1.3187124 |
0.308 |
|
1987 |
Diei EN, Dornfeld DA. A Model of Tool Fracture Generated Acoustic Emission During Machining Journal of Engineering For Industry. 109: 227-233. DOI: 10.1115/1.3187123 |
0.329 |
|
1987 |
Rangwala S, Liang S, Dornfeld D. Pattern recognition of acoustic emission signals during punch stretching Mechanical Systems and Signal Processing. 1: 321-332. DOI: 10.1016/0888-3270(87)90092-6 |
0.331 |
|
1987 |
Jouaneh M, Lemaster RL, Dornfeld DA. Measuring workpiece dimensions using a non-contact laser detector system The International Journal of Advanced Manufacturing Technology. 2: 59-74. DOI: 10.1007/Bf02601469 |
0.366 |
|
1985 |
Lemaster RL, Tee LB, Dornfeld DA. Monitoring tool wear during wood machining with acoustic emission Wear. 101: 273-282. DOI: 10.1016/0043-1648(85)90081-X |
0.417 |
|
1982 |
Kannatey-Asibu E, Dornfeld DA. A study of tool wear using statistical analysis of metal-cutting acoustic emission Wear. 76: 247-261. DOI: 10.1016/0043-1648(82)90009-6 |
0.402 |
|
1981 |
Kannatey-Asibu E, Dornfeld DA. Quantitative Relationships for Acoustic Emission from Orthogonal Metal Cutting Journal of Engineering For Industry. 103: 330-340. DOI: 10.1115/1.3184493 |
0.356 |
|
1981 |
Dornfeld DA. Single Grit Simulation of the Abrasive Machining of Wood Journal of Engineering For Industry. 103: 1-12. DOI: 10.1115/1.3184456 |
0.361 |
|
1981 |
Svestka JA, Dornfeld DA, Gil RA. On improving the productivity of numerically controlled punch presses International Journal of Production Research. 19: 471-480. DOI: 10.1080/00207548108956678 |
0.393 |
|
1980 |
Tomizuka M, Dornfeld D, Purcell M. Application of Microcomputers to Automatic Weld Quality Control Journal of Dynamic Systems, Measurement, and Control. 102: 62-68. DOI: 10.1115/1.3149598 |
0.31 |
|
1980 |
Dornfeld DA, Kannatey-Asibu E. Acoustic emission during orthogonal metal cutting International Journal of Mechanical Sciences. 22: 285-296. DOI: 10.1016/0020-7403(80)90029-6 |
0.319 |
|
Show low-probability matches. |