| Year |
Citation |
Score |
| 2024 |
Phan TQ, Levine LE, Lee IF, Tischler JZ, Xu R, Huang Y, Langdon TG, Kassner ME. Synchrotron X-Ray Microbeam Diffraction Measurements of Full Elastic Long Range Internal Strain and Stress Tensors in Commercial-Purity Aluminum Processed by Multiple Passes of Equal-Channel Angular Pressing. Acta Materialia. 112. PMID 38616819 DOI: 10.1016/j.actamat.2016.04.035 |
0.318 |
|
| 2023 |
Medeiros MP, Lopes DR, Kawasaki M, Langdon TG, Figueiredo RB. An Overview on the Effect of Severe Plastic Deformation on the Performance of Magnesium for Biomedical Applications. Materials (Basel, Switzerland). 16. PMID 36984281 DOI: 10.3390/ma16062401 |
0.753 |
|
| 2022 |
Li Z, Li LY, Zhu YB, Lin K, Ren ZT, Yang Y, Liu Y, Wang JT, Langdon TG. Evidence for a stable single component sharp texture in high purity aluminum during tube high-pressure shearing at room temperature. Scientific Reports. 12: 17901. PMID 36284145 DOI: 10.1038/s41598-022-21717-z |
0.413 |
|
| 2021 |
Nosewicz S, Bazarnik P, Clozel M, Kurpaska Ł, Jenczyk P, Jarząbek D, Chmielewski M, Romelczyk-Baishya B, Lewandowska M, Pakieła Z, Huang Y, Langdon TG. A multiscale experimental analysis of mechanical properties and deformation behavior of sintered copper-silicon carbide composites enhanced by high-pressure torsion. Archives of Civil and Mechanical Engineering. 21: 131. PMID 39898110 DOI: 10.1007/s43452-021-00286-4 |
0.333 |
|
| 2021 |
Bartkowska A, Bazarnik P, Huang Y, Lewandowska M, Langdon TG. Using high-pressure torsion to fabricate an Al–Ti hybrid system with exceptional mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 799: 140114. DOI: 10.1016/J.Msea.2020.140114 |
0.541 |
|
| 2020 |
Han J, Liss K, Langdon TG, Jang J, Kawasaki M. Mechanical properties and structural stability of a bulk nanostructured metastable aluminum-magnesium system Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 796: 140050. DOI: 10.1016/J.Msea.2020.140050 |
0.613 |
|
| 2020 |
Luo D, Huminiuc T, Huang Y, Polcar T, Langdon TG. The fabrication of high strength Zr/Nb nanocomposites using high-pressure torsion Materials Science and Engineering: A. 790: 139693. DOI: 10.1016/J.Msea.2020.139693 |
0.482 |
|
| 2020 |
Figueiredo RB, Langdon TG. Analysis of the creep behavior of fine-grained AZ31 magnesium alloy Materials Science and Engineering: A. 787: 139489. DOI: 10.1016/J.Msea.2020.139489 |
0.749 |
|
| 2020 |
Afifi MA, Wang YC, Langdon TG. Effect of dynamic plastic deformation on the microstructure and mechanical properties of an Al–Zn–Mg alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 784: 139287. DOI: 10.1016/J.Msea.2020.139287 |
0.597 |
|
| 2020 |
Bednarczyk W, Kawałko J, Wątroba M, Gao N, Starink MJ, Bała P, Langdon TG. Microstructure and mechanical properties of a Zn-0.5Cu alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 776: 139047. DOI: 10.1016/J.Msea.2020.139047 |
0.571 |
|
| 2020 |
Alawadhi MY, Sabbaghianrad S, Wang YC, Huang Y, Langdon TG. Characteristics of grain refinement in oxygen-free copper processed by equal-channel angular pressing and dynamic testing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 775: 138985. DOI: 10.1016/J.Msea.2020.138985 |
0.814 |
|
| 2020 |
Bourezg YI, Azzeddine H, Harfouche M, Thiaudiere D, Mocuta C, Huang Y, Bradai D, Langdon TG. An investigation by EXAFS of local atomic structure in an Mg-Nd alloy after processing by high-pressure torsion and ageing Materials Letters. 264: 127379. DOI: 10.1016/J.Matlet.2020.127379 |
0.375 |
|
| 2020 |
Silva C, Montoro LA, Martins DA, Machado PA, Pereira PHR, Gonzalez BM, Langdon TG, Figueiredo RB, Isaac A. Interface structures in Al-Nb2O5 nanocomposites processed by high-pressure torsion at room temperature Materials Characterization. 162: 110222. DOI: 10.1016/J.Matchar.2020.110222 |
0.692 |
|
| 2020 |
Milhorato FR, Figueiredo RB, Langdon TG, Mazzer EM. Development of an Al 7050-10 vol.% alumina nanocomposite through cold consolidation of particles by high-pressure torsion Journal of Materials Research and Technology. 9: 12626-12633. DOI: 10.1016/J.Jmrt.2020.09.014 |
0.68 |
|
| 2020 |
Bourezg YI, Azzeddine H, Abib K, Huang Y, Bradai D, Langdon TG. Recrystallization in an Mg-Nd alloy processed by high-pressure torsion: a calorimetric analysis Journal of Materials Research and Technology. 9: 3047-3054. DOI: 10.1016/J.Jmrt.2020.01.035 |
0.495 |
|
| 2020 |
Bazarnik P, Bartkowska A, Romelczyk-Baishya B, Adamczyk-Cieślak B, Dai J, Huang Y, Lewandowska M, Langdon TG. Superior strength of tri-layered Al–Cu–Al nano-composites processed by high-pressure torsion Journal of Alloys and Compounds. 846: 156380. DOI: 10.1016/J.Jallcom.2020.156380 |
0.446 |
|
| 2020 |
Mousavi T, Dai J, Bazarnik P, Pereira PHR, Huang Y, Lewandowska M, Langdon TG. Fabrication and characterization of nanostructured immiscible Cu–Ta alloys processed by high-pressure torsion Journal of Alloys and Compounds. 832: 155007. DOI: 10.1016/J.Jallcom.2020.155007 |
0.578 |
|
| 2020 |
Wang CT, He Y, Langdon TG. The significance of strain weakening and self-annealing in a superplastic Bi-Sn eutectic alloy processed by high-pressure torsion Acta Materialia. 185: 245-256. DOI: 10.1016/J.Actamat.2019.11.064 |
0.613 |
|
| 2020 |
Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer MJ, Zhu YT. Correction to: Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation Jom. 72: 3304-3304. DOI: 10.1007/S11837-020-04194-5 |
0.442 |
|
| 2020 |
Wątroba M, Bednarczyk W, Kawałko J, Lech S, Wieczerzak K, Langdon TG, Bała P. A Novel High-Strength Zn-3Ag-0.5Mg Alloy Processed by Hot Extrusion, Cold Rolling, or High-Pressure Torsion Metallurgical and Materials Transactions A. 51: 3335-3348. DOI: 10.1007/S11661-020-05797-Y |
0.595 |
|
| 2020 |
Lopes D, Soares RB, Castro MM, Figueiredo RB, Langdon TG, Lins VFC. Corrosion Behavior in Hank's Solution of a Magnesium‐Hydroxyapatite Composite Processed by High‐Pressure Torsion Advanced Engineering Materials. 2000765. DOI: 10.1002/Adem.202000765 |
0.593 |
|
| 2020 |
Huang Y, Millet J, Zhang NX, Jenei P, Gubicza J, Langdon TG. An Investigation of Strain Softening Phenomenon in Al‐0.1% Mg Alloy during High‐Pressure Torsion Processing Advanced Engineering Materials. 1901578. DOI: 10.1002/Adem.201901578 |
0.537 |
|
| 2020 |
Yu H, Wang L, Yan M, Gu H, Zhao X, Kong C, Wang Y, Pesin A, Zhilyaev AP, Langdon TG. Microstructural Evolution and Mechanical Properties of Ultrafine‐Grained Ti Fabricated by Cryorolling and Subsequent Annealing Advanced Engineering Materials. 1901463. DOI: 10.1002/Adem.201901463 |
0.428 |
|
| 2020 |
Chen W, Xu J, Liu D, Bao J, Sabbaghianrad S, Shan D, Guo B, Langdon TG. Microstructural Evolution and Microhardness Variations in Pure Titanium Processed by High‐Pressure Torsion Advanced Engineering Materials. 22: 1901462. DOI: 10.1002/Adem.201901462 |
0.798 |
|
| 2020 |
Han J, Herndon T, Jang J, Langdon TG, Kawasaki M. Synthesis of Hybrid Nanocrystalline Alloys by Mechanical Bonding through High‐Pressure Torsion Advanced Engineering Materials. 22: 1901289. DOI: 10.1002/Adem.201901289 |
0.575 |
|
| 2020 |
Semenova IP, Selivanov KS, Valiev RR, Modina IM, Smyslova MK, Polyakov AV, Langdon TG. Enhanced Creep Resistance of an Ultrafine‐Grained Ti–6Al–4V Alloy with Modified Surface by Ion Implantation and (Ti + V)N Coating Advanced Engineering Materials. 1901219. DOI: 10.1002/Adem.201901219 |
0.331 |
|
| 2020 |
Wang X, Li P, Huang Y, Gao N, Langdon TG. Microstructure and Microhardness Evolution in Pure Molybdenum Processed by High‐Pressure Torsion Advanced Engineering Materials. 22: 1901022. DOI: 10.1002/Adem.201901022 |
0.538 |
|
| 2020 |
Alawadhi MY, Sabbaghianrad S, Huang Y, Langdon TG. The Stability of Oxygen‐Free Copper Processed by High‐Pressure Torsion after Room Temperature Storage for 12 Months Advanced Engineering Materials. 22: 1901015. DOI: 10.1002/Adem.201901015 |
0.8 |
|
| 2020 |
Jiang W, Zhou H, Cao Y, Nie J, Li Y, Zhao Y, Kawasaki M, Langdon TG, Zhu Y. On the Heterogeneity of Local Shear Strain Induced by High‐Pressure Torsion Advanced Engineering Materials. 22: 1900477. DOI: 10.1002/Adem.201900477 |
0.496 |
|
| 2019 |
Han JK, Liss KD, Langdon TG, Kawasaki M. Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg. Scientific Reports. 9: 17186. PMID 31748547 DOI: 10.1038/S41598-019-53614-3 |
0.677 |
|
| 2019 |
Castro MM, Lopes DR, Soares RB, Dos Santos DMM, Nunes EHM, Lins VFC, Pereira PHR, Isaac A, Langdon TG, Figueiredo RB. Magnesium-Based Bioactive Composites Processed at Room Temperature. Materials (Basel, Switzerland). 12. PMID 31426290 DOI: 10.3390/Ma12162609 |
0.65 |
|
| 2019 |
Kral P, Dvorak J, Sklenicka V, Langdon TG. The Characteristics of Creep in Metallic Materials Processed by Severe Plastic Deformation Materials Transactions. 60: 1506-1517. DOI: 10.2320/Matertrans.Mf201924 |
0.42 |
|
| 2019 |
Kawasaki M, Langdon TG. The Contribution of Severe Plastic Deformation to Research on Superplasticity Materials Transactions. 60: 1123-1130. DOI: 10.2320/Matertrans.Mf201915 |
0.533 |
|
| 2019 |
Han J, Jang J, Langdon TG, Kawasaki M. Bulk-State Reactions and Improving the Mechanical Properties of Metals through High-Pressure Torsion Materials Transactions. 60: 1131-1138. DOI: 10.2320/Matertrans.Mf201908 |
0.508 |
|
| 2019 |
Castro M, Pereira PH, Figueiredo R, Langdon T. Developing magnesium-based composites through high-pressure torsion Letters On Materials. 9: 541-545. DOI: 10.22226/2410-3535-2019-4-541-545 |
0.594 |
|
| 2019 |
Lage MDA, Soares RB, Pereira PHR, Figueiredo RB, Lins VFC, Langdon TG. Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution Materials Research. 22. DOI: 10.1590/1980-5373-Mr-2019-0343 |
0.638 |
|
| 2019 |
Azzeddine H, Bourezg YI, Khereddine AY, Baudin T, Helbert A, Brisset F, Kawasaki M, Bradai D, Langdon TG. An investigation of the stored energy and thermal stability in a Cu–Ni–Si alloy processed by high-pressure torsion Philosophical Magazine. 100: 688-712. DOI: 10.1080/14786435.2019.1703055 |
0.61 |
|
| 2019 |
Bazarnik P, Nosewicz S, Romelczyk-Baishya B, Chmielewski M, Strojny Nędza A, Maj J, Huang Y, Lewandowska M, Langdon T. Effect of spark plasma sintering and high-pressure torsion on the microstructural and mechanical properties of a Cu–SiC composite Materials Science and Engineering: A. 766: 138350. DOI: 10.1016/J.Msea.2019.138350 |
0.5 |
|
| 2019 |
Javadzadeh Kalahroudi F, Koohdar H, Jafarian HR, Huang Y, Langdon TG, Nili-Ahmadabadi M. Corrigendum to “On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion” [Mater. Sci. Eng. A 749 (11 March 2019) 27–34] Materials Science and Engineering: A. 767: 138213. DOI: 10.1016/J.Msea.2019.138213 |
0.431 |
|
| 2019 |
Chinh NQ, Rácz G, Gubicza J, Valiev RZ, Langdon TG. A possible stabilizing effect of work hardening on the tensile performance of superplastic materials Materials Science and Engineering: A. 759: 448-454. DOI: 10.1016/J.Msea.2019.05.063 |
0.413 |
|
| 2019 |
Kalahroudi FJ, Koohdar H, Jafarian HR, Haung Y, Langdon TG, Nili-Ahmadabadi M. On the microstructure and mechanical properties of an Fe-10Ni-7Mn martensitic steel processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 749: 27-34. DOI: 10.1016/J.Msea.2019.02.002 |
0.539 |
|
| 2019 |
Hanna A, Azzeddine H, Huang Y, Bradai D, Cabrera JM, Langdon TG. An investigation of the thermal stability of an Mg-Dy alloy after processing by high-pressure torsion Materials Characterization. 151: 519-529. DOI: 10.1016/J.Matchar.2019.03.040 |
0.517 |
|
| 2019 |
Castro MM, Sabbaghianrad S, Pereira PHR, Mazzer EM, Isaac A, Langdon TG, Figueiredo RB. A magnesium-aluminium composite produced by high-pressure torsion Journal of Alloys and Compounds. 804: 421-426. DOI: 10.1016/J.Jallcom.2019.07.007 |
0.825 |
|
| 2019 |
Afifi MA, Wang YC, Cheng X, Li S, Langdon TG. Strain rate dependence of compressive behavior in an Al-Zn-Mg alloy processed by ECAP Journal of Alloys and Compounds. 791: 1079-1087. DOI: 10.1016/J.Jallcom.2019.03.390 |
0.548 |
|
| 2019 |
Lin H, Li GY, Mortier S, Bazarnik P, Huang Y, Lewandowska M, Langdon TG. Processing of CP-Ti by high-pressure torsion and the effect of surface modification using a post-HPT laser treatment Journal of Alloys and Compounds. 784: 653-659. DOI: 10.1016/J.Jallcom.2019.01.019 |
0.413 |
|
| 2019 |
Castro MM, Pereira PHR, Isaac A, Figueiredo RB, Langdon TG. Development of a magnesium-alumina composite through cold consolidation of machining chips by high-pressure torsion Journal of Alloys and Compounds. 780: 422-427. DOI: 10.1016/J.Jallcom.2018.11.357 |
0.665 |
|
| 2019 |
Hanna A, Azzeddine H, Lachhab R, Baudin T, Helbert A, Brisset F, Huang Y, Bradai D, Langdon TG. Evaluating the textural and mechanical properties of an Mg-Dy alloy processed by high-pressure torsion Journal of Alloys and Compounds. 778: 61-71. DOI: 10.1016/J.Jallcom.2018.11.109 |
0.598 |
|
| 2019 |
Torbati-Sarraf H, Torbati-Sarraf SA, Poursaee A, Langdon TG. Electrochemical behavior of a magnesium ZK60 alloy processed by high-pressure torsion Corrosion Science. 154: 90-100. DOI: 10.1016/J.Corsci.2019.04.006 |
0.544 |
|
| 2019 |
Huang Y, Bazarnik P, Wan D, Luo D, Pereira PHR, Lewandowska M, Yao J, Hayden BE, Langdon TG. The fabrication of graphene-reinforced Al-based nanocomposites using high-pressure torsion Acta Materialia. 164: 499-511. DOI: 10.1016/J.Actamat.2018.10.060 |
0.43 |
|
| 2019 |
Wang YC, Afifi MA, Cheng X, Li S, Langdon TG. An Evaluation of the Microstructure and Microhardness in an Al–Zn–Mg Alloy Processed by ECAP and Post‐ECAP Heat Treatments Advanced Engineering Materials. 22: 1901040. DOI: 10.1002/Adem.201901040 |
0.435 |
|
| 2019 |
Castro MM, Pereira PHR, Isaac A, Langdon TG, Figueiredo RB. Inverse Hall–Petch Behaviour in an AZ91 Alloy and in an AZ91–Al2O3 Composite Consolidated by High‐Pressure Torsion Advanced Engineering Materials. 1900894. DOI: 10.1002/Adem.201900894 |
0.679 |
|
| 2019 |
Tighiouaret S, Lachhab R, Hanna A, Azzeddine H, Huang Y, Baudin T, Helbert A, Brisset F, Bradai D, Langdon TG. Thermal Stability of an Mg–Nd Alloy Processed by High‐Pressure Torsion Advanced Engineering Materials. 21: 1900801. DOI: 10.1002/Adem.201900801 |
0.518 |
|
| 2019 |
Ding C, Xu J, Li X, Shan D, Guo B, Langdon TG. Microstructural Evolution and Mechanical Behavior of Cu/Nb Multilayer Composites Processed by Accumulative Roll Bonding Advanced Engineering Materials. 22: 1900702. DOI: 10.1002/Adem.201900702 |
0.381 |
|
| 2019 |
Bulutsuz AG, Chrominski W, Huang Y, Kral P, Yurci ME, Lewandowska M, Langdon TG. A Comparison of Warm and Combined Warm and Low‐Temperature Processing Routes for the Equal‐Channel Angular Pressing of Pure Titanium Advanced Engineering Materials. 22: 1900698. DOI: 10.1002/Adem.201900698 |
0.432 |
|
| 2019 |
Figueiredo RB, Pereira PHR, Langdon TG. Effect of Numbers of Turns of High‐Pressure Torsion on the Development of Exceptional Ductility in Pure Magnesium Advanced Engineering Materials. 22: 1900565. DOI: 10.1002/Adem.201900565 |
0.595 |
|
| 2019 |
Lopes DR, Silva CL, Soares RB, Pereira PHR, Oliveira AC, Figueiredo RB, Langdon TG, Lins VF. Cytotoxicity and Corrosion Behavior of Magnesium and Magnesium Alloys in Hank's Solution after Processing by High‐Pressure Torsion Advanced Engineering Materials. 21: 1900391. DOI: 10.1002/Adem.201900391 |
0.651 |
|
| 2019 |
Shahmir H, Nili-Ahmadabadi M, Mohammadi M, Huang Y, Andrzejczuk M, Lewandowska M, Langdon TG. Effect of Cu on Amorphization of a TiNi Alloy during HPT and Shape Memory Effect after Post‐Deformation Annealing Advanced Engineering Materials. 22: 1900387. DOI: 10.1002/Adem.201900387 |
0.519 |
|
| 2019 |
Almazrouee AI, Al‐Fadhalah KJ, Alhajeri SN, Huang Y, Langdon TG. Effect of Long-Term Storage on Microstructure and Microhardness Stability in OFHC Copper Processed by High-Pressure Torsion Advanced Engineering Materials. 21: 1801300. DOI: 10.1002/Adem.201801300 |
0.531 |
|
| 2019 |
Silva CLP, Soares RB, Pereira PHR, Figueiredo RB, Lins VFC, Langdon TG. The Effect of High‐Pressure Torsion on Microstructure, Hardness and Corrosion Behavior for Pure Magnesium and Different Magnesium Alloys Advanced Engineering Materials. 21: 1801081. DOI: 10.1002/Adem.201801081 |
0.674 |
|
| 2019 |
Xu J, Su Q, Wang C, Wang X, Shan D, Guo B, Langdon TG. Micro‐Embossing Formability of a Superlight Dual‐Phase Mg–Li Alloy Processed by High‐Pressure Torsion Advanced Engineering Materials. 21: 1800961. DOI: 10.1002/Adem.201800961 |
0.526 |
|
| 2018 |
Ahmadkhaniha D, Huang Y, Jaskari M, Järvenpää A, Sohi MH, Zanella C, Karjalainen LP, Langdon TG. Effect of high-pressure torsion on microstructure, mechanical properties and corrosion resistance of cast pure Mg. Journal of Materials Science. 53: 16585-16597. PMID 30393393 DOI: 10.1007/S10853-018-2779-1 |
0.532 |
|
| 2018 |
de Castro MM, Carvalho AP, Pereira PHR, Isaac Neta AC, Figueiredo RB, Langdon TG. Consolidation of Magnesium and Magnesium Alloy Machine Chips Using High-Pressure Torsion Materials Science Forum. 941: 851-856. DOI: 10.4028/Www.Scientific.Net/Msf.941.851 |
0.716 |
|
| 2018 |
Kawasaki M, Han JK, Lee DH, Jang JI, Langdon TG. Micro-Scale Mechanical Behavior of Ultrafine-Grained Materials Processed by High-Pressure Torsion Materials Science Forum. 941: 1495-1500. DOI: 10.4028/Www.Scientific.Net/Msf.941.1495 |
0.675 |
|
| 2018 |
Shahmir H, Kawasaki M, Langdon TG. Developing Superplasticity in High-Entropy Alloys Processed by Severe Plastic Deformation Materials Science Forum. 941: 1059-1064. DOI: 10.4028/Www.Scientific.Net/Msf.941.1059 |
0.71 |
|
| 2018 |
Kawasaki M, Jang JI, Langdon TG. Superplastic Flow and Micro-Mechanical Response of Ultrafine-Grained Materials Defect and Diffusion Forum. 385: 9-14. DOI: 10.4028/Www.Scientific.Net/Ddf.385.9 |
0.708 |
|
| 2018 |
Figueiredo RB, Pereira PHR, Langdon TG. Low Temperature Superplasticity in Ultrafine-Grained AZ31 Alloy Defect and Diffusion Forum. 385: 59-64. DOI: 10.4028/Www.Scientific.Net/Ddf.385.59 |
0.722 |
|
| 2018 |
Langdon TG. Thirty Years of Superplastic Ultrafine-Grained Materials: Examining the Legacy of Oscar Kaibyshev Defect and Diffusion Forum. 385: 3-8. DOI: 10.4028/Www.Scientific.Net/Ddf.385.3 |
0.428 |
|
| 2018 |
Zhilyaev AP, Huang Y, Cabrera JM, Langdon TG. Influence of Inhomogeneity on Mechanical Properties of Commercially Pure Titanium Processed by HPT Defect and Diffusion Forum. 385: 284-289. DOI: 10.4028/Www.Scientific.Net/Ddf.385.284 |
0.485 |
|
| 2018 |
Huang Y, Muzy J, Bazarnik P, Lewandowska M, Langdon TG. Effect of different initial lamellar plate thicknesses on grain refinement and superplastic behaviour in HPT-processed Ti-6Al-4V alloy Defect and Diffusion Forum. 385: 182-188. DOI: 10.4028/Www.Scientific.Net/Ddf.385.182 |
0.528 |
|
| 2018 |
Kawasaki M, Han J, Lee D, Jang J, Langdon TG. Fabrication of nanocomposites through diffusion bonding under high-pressure torsion Journal of Materials Research. 33: 2700-2710. DOI: 10.1557/Jmr.2018.205 |
0.482 |
|
| 2018 |
Kawasaki M, Langdon T. Fabrication of High Strength Hybrid Materials through the Application of High-Pressure Torsion Acta Physica Polonica A. 134: 615-623. DOI: 10.12693/Aphyspola.134.615 |
0.691 |
|
| 2018 |
Shahmir H, Nili-Ahmadabadi M, Huang Y, Jung JM, Kim HS, Langdon TG. Shape memory characteristics of a nanocrystalline TiNi alloy processed by HPT followed by post-deformation annealing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 734: 445-452. DOI: 10.1016/J.Msea.2018.08.019 |
0.525 |
|
| 2018 |
Zhang W, Ding H, Pereira PHR, Huang Y, Langdon TG. Grain refinement and superplastic flow in a fully lamellar Ti-6Al-4V alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 732: 398-405. DOI: 10.1016/J.Msea.2018.07.010 |
0.59 |
|
| 2018 |
Shahmir H, Nili-Ahmadabadi M, Shafiee A, Andrzejczuk M, Lewandowska M, Langdon TG. Effect of Ti on phase stability and strengthening mechanisms of a nanocrystalline CoCrFeMnNi high-entropy alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 725: 196-206. DOI: 10.1016/J.Msea.2018.04.014 |
0.573 |
|
| 2018 |
Bourezg YI, Azzeddine H, Baudin T, Helbert A, Huang Y, Bradai D, Langdon TG. Texture and microhardness of Mg-Rare Earth (Nd and Ce) alloys processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 724: 477-485. DOI: 10.1016/J.Msea.2018.03.114 |
0.552 |
|
| 2018 |
Heczel A, Kawasaki M, Ugi D, Jang J, Langdon TG, Gubicza J. The influence of chemical heterogeneities on the local mechanical behavior of a high-entropy alloy: A micropillar compression study Materials Science and Engineering: A. 721: 165-167. DOI: 10.1016/J.Msea.2018.02.087 |
0.6 |
|
| 2018 |
Shahmir H, Nili-Ahmadabadi M, Shafiee A, Langdon TG. Effect of a minor titanium addition on the superplastic properties of a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 718: 468-476. DOI: 10.1016/J.Msea.2018.02.002 |
0.607 |
|
| 2018 |
Shahmir H, Naghdi F, Pereira PHR, Huang Y, Langdon TG. Factors influencing superplasticity in the Ti-6Al-4V alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 718: 198-206. DOI: 10.1016/J.Msea.2018.01.091 |
0.602 |
|
| 2018 |
Semenova IP, Modina JM, Polyakov AV, Klevtsov GV, Klevtsova NA, Pigaleva IN, Valiev RZ, Langdon TG. Fracture toughness at cryogenic temperatures of ultrafine-grained Ti-6Al-4V alloy processed by ECAP Materials Science and Engineering: A. 716: 260-267. DOI: 10.1016/J.Msea.2017.12.106 |
0.502 |
|
| 2018 |
Edalati K, Hashiguchi Y, Pereira PHR, Horita Z, Langdon TG. Effect of temperature rise on microstructural evolution during high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 714: 167-171. DOI: 10.1016/J.Msea.2017.12.095 |
0.428 |
|
| 2018 |
Bazarnik P, Huang Y, Lewandowska M, Langdon TG. Enhanced grain refinement and microhardness by hybrid processing using hydrostatic extrusion and high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 712: 513-520. DOI: 10.1016/J.Msea.2017.12.007 |
0.592 |
|
| 2018 |
Afifi MA, Wang YC, Pereira PHR, Wang Y, Li S, Huang Y, Langdon TG. Characterization of precipitates in an Al-Zn-Mg alloy processed by ECAP and subsequent annealing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 712: 146-156. DOI: 10.1016/J.Msea.2017.11.091 |
0.538 |
|
| 2018 |
Sabbaghianrad S, Torbati-Sarraf SA, Langdon TG. An investigation of the limits of grain refinement after processing by a combination of severe plastic deformation techniques: A comparison of Al and Mg alloys Materials Science and Engineering: A. 712: 373-379. DOI: 10.1016/J.Msea.2017.11.090 |
0.846 |
|
| 2018 |
El-Tahawy M, Pereira PHR, Huang Y, Park H, Choe H, Langdon TG, Gubicza J. Exceptionally high strength and good ductility in an ultrafine-grained 316L steel processed by severe plastic deformation and subsequent annealing Materials Letters. 214: 240-242. DOI: 10.1016/J.Matlet.2017.12.040 |
0.556 |
|
| 2018 |
Afifi MA, Wang YC, Pereira PHR, Huang Y, Wang Y, Cheng X, Li S, Langdon TG. Mechanical properties of an Al-Zn-Mg alloy processed by ECAP and heat treatments Journal of Alloys and Compounds. 769: 631-639. DOI: 10.1016/J.Jallcom.2018.07.343 |
0.526 |
|
| 2018 |
Tirsatine K, Azzeddine H, Huang Y, Baudin T, Helbert A, Brisset F, Bradai D, Langdon TG. An EBSD analysis of Fe-36%Ni alloy processed by HPT at ambient and a warm temperature Journal of Alloys and Compounds. 753: 46-53. DOI: 10.1016/J.Jallcom.2018.04.194 |
0.551 |
|
| 2018 |
Afifi MA, Wang YC, Pereira PHR, Huang Y, Wang Y, Cheng X, Li S, Langdon TG. Effect of heat treatments on the microstructures and tensile properties of an ultrafine-grained Al-Zn-Mg alloy processed by ECAP Journal of Alloys and Compounds. 749: 567-574. DOI: 10.1016/J.Jallcom.2018.03.206 |
0.505 |
|
| 2018 |
Remington T, Hahn E, Zhao S, Flanagan R, Mertens J, Sabbaghianrad S, Langdon T, Wehrenberg C, Maddox B, Swift D, Remington B, Chawla N, Meyers M. Spall strength dependence on grain size and strain rate in tantalum Acta Materialia. 158: 313-329. DOI: 10.1016/J.Actamat.2018.07.048 |
0.815 |
|
| 2018 |
Shahmir H, Tabachnikova E, Podolskiy A, Tikhonovsky M, Langdon TG. Effect of carbon content and annealing on structure and hardness of CrFe 2 NiMnV 0.25 high-entropy alloys processed by high-pressure torsion Journal of Materials Science. 53: 11813-11822. DOI: 10.1007/S10853-018-2456-4 |
0.589 |
|
| 2018 |
Figueiredo RB, Langdon TG. Processing Magnesium and Its Alloys by High-Pressure Torsion: An Overview Advanced Engineering Materials. 21: 1801039. DOI: 10.1002/Adem.201801039 |
0.707 |
|
| 2018 |
Han J, Han DK, Liang GY, Jang J, Langdon TG, Kawasaki M. Direct Bonding of Aluminum-Copper Metals through High-Pressure Torsion Processing Advanced Engineering Materials. 20: 1800642. DOI: 10.1002/Adem.201800642 |
0.531 |
|
| 2018 |
Gubicza J, Pereira PHR, Kapoor G, Huang Y, Vadlamani SS, Langdon TG. Annealing-Induced Hardening in Ultrafine-Grained Ni-Mo Alloys Advanced Engineering Materials. 20: 1800184. DOI: 10.1002/Adem.201800184 |
0.534 |
|
| 2018 |
Semenova IP, Dyakonov GS, Raab GI, Grishina YF, Huang Y, Langdon TG. Features of Duplex Microstructural Evolution and Mechanical Behavior in the Titanium Alloy Processed by Equal‐Channel Angular Pressing Advanced Engineering Materials. 20: 1700813. DOI: 10.1002/Adem.201700813 |
0.583 |
|
| 2018 |
Torbati-Sarraf SA, Sabbaghianrad S, Langdon TG. Using Post‐Deformation Annealing to Optimize the Properties of a ZK60 Magnesium Alloy Processed by High‐Pressure Torsion Advanced Engineering Materials. 20: 1700703. DOI: 10.1002/Adem.201700703 |
0.841 |
|
| 2018 |
Alhajeri SN, Almazrouee AI, Al‐Fadhalah KJ, Langdon TG. Effect of Initial Annealing Temperature on Microstructural Development and Microhardness in High‐Purity Copper Processed by High‐Pressure Torsion Advanced Engineering Materials. 20: 1700503. DOI: 10.1002/Adem.201700503 |
0.558 |
|
| 2017 |
Heczel A, Huang Y, Langdon TG, Gubicza J. Investigation of Lattice Defects in a Plastically Deformed High-Entropy Alloy Materials Science Forum. 885: 74-79. DOI: 10.4028/Www.Scientific.Net/Msf.885.74 |
0.554 |
|
| 2017 |
El-Tahawy M, Gubicza J, Huang Y, Choi HL, Choe HM, Lábár JL, Langdon TG. The influence of plastic deformation on lattice defect structure and mechanical properties of 316L austenitic stainless steel Materials Science Forum. 885: 13-18. DOI: 10.4028/Www.Scientific.Net/Msf.885.13 |
0.46 |
|
| 2017 |
Silva CLP, Tristão IC, Sabbaghianrad S, Torbati-Sarraf SA, Figueiredo RB, Langdon TG. Microstructure and Hardness Evolution in Magnesium Processed by HPT Materials Research. 20: 2-7. DOI: 10.1590/1980-5373-Mr-2017-0223 |
0.84 |
|
| 2017 |
Kawasaki M, Langdon TG. Using Severe Plastic Deformation to Fabricate Strong Metal Matrix Composites Materials Research. 20: 46-52. DOI: 10.1590/1980-5373-Mr-2017-0218 |
0.529 |
|
| 2017 |
Pereira PHR, Huang Y, Langdon TG. Examining the Thermal Stability of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion Materials Research-Ibero-American Journal of Materials. 20: 39-45. DOI: 10.1590/1980-5373-Mr-2017-0207 |
0.568 |
|
| 2017 |
Pereira PH, Huang Y, Kawasaki M, Langdon TG. An examination of the superplastic characteristics of Al–Mg–Sc alloys after processing Journal of Materials Research. 32: 4541-4553. DOI: 10.1557/Jmr.2017.286 |
0.652 |
|
| 2017 |
Naghdi F, Figueiredo RB, Langdon TG. Effect of equal-channel angular pressing on the mechanical behavior of a Bi-Sn eutectic alloy Iop Conference Series: Materials Science and Engineering. 194: 012042. DOI: 10.1088/1757-899X/194/1/012042 |
0.618 |
|
| 2017 |
Li J, Xu J, Guo B, Shan D, Langdon TG. Shear fracture mechanism in micro-tension of an ultrafine-grained pure copper using synchrotron radiation X-ray tomography Scripta Materialia. 132: 25-29. DOI: 10.1016/J.Scriptamat.2017.01.021 |
0.395 |
|
| 2017 |
Torbati-Sarraf SA, Alizadeh R, Mahmudi R, Langdon TG. Evaluating the flow properties of a magnesium ZK60 alloy processed by high-pressure torsion: A comparison of two different miniature testing techniques Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 708: 432-439. DOI: 10.1016/J.Msea.2017.10.009 |
0.507 |
|
| 2017 |
Shahmir H, Mousavi T, He J, Lu Z, Kawasaki M, Langdon TG. Microstructure and properties of a CoCrFeNiMn high-entropy alloy processed by equal-channel angular pressing Materials Science and Engineering: A. 705: 411-419. DOI: 10.1016/J.Msea.2017.08.083 |
0.691 |
|
| 2017 |
Shahmir H, Langdon TG. An evaluation of the hexagonal close-packed to face-centered cubic phase transformation in a Ti-6Al-4V alloy during high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 704: 212-217. DOI: 10.1016/J.Msea.2017.07.099 |
0.496 |
|
| 2017 |
Semenova IP, Polyakov AV, Polyakova VV, Grishina YF, Huang Y, Valiev RZ, Langdon TG. Mechanical behavior and impact toughness of the ultrafine-grained Grade 5 Ti alloy processed by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 696: 166-173. DOI: 10.1016/J.Msea.2017.04.073 |
0.593 |
|
| 2017 |
Zhilyaev AP, Ringot G, Huang Y, Maria Cabrera J, Langdon TG. Mechanical behavior and microstructure properties of titanium powder consolidated by high-pressure torsion Materials Science and Engineering: A. 688: 498-504. DOI: 10.1016/J.Msea.2017.02.032 |
0.495 |
|
| 2017 |
Kapoor G, Huang Y, Sarma VS, Langdon TG, Gubicza J. Effect of Mo addition on the microstructure and hardness of ultrafine-grained Ni alloys processed by a combination of cryorolling and high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 688: 92-100. DOI: 10.1016/J.Msea.2017.01.104 |
0.538 |
|
| 2017 |
Pereira PHR, Wang YC, Huang Y, Langdon TG. Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 685: 367-376. DOI: 10.1016/J.Msea.2017.01.020 |
0.615 |
|
| 2017 |
Shahmir H, He J, Lu Z, Kawasaki M, Langdon TG. Evidence for superplasticity in a CoCrFeNiMn high-entropy alloy processed by high-pressure torsion Materials Science and Engineering: A. 685: 342-348. DOI: 10.1016/J.Msea.2017.01.016 |
0.703 |
|
| 2017 |
Afifi MA, Pereira PHR, Wang YC, Wang Y, Li S, Langdon TG. Effect of ECAP processing on microstructure evolution and dynamic compressive behavior at different temperatures in an Al-Zn-Mg alloy Materials Science and Engineering: A. 684: 617-625. DOI: 10.1016/J.Msea.2016.12.099 |
0.604 |
|
| 2017 |
Han J, Lee H, Jang J, Kawasaki M, Langdon TG. Micro-mechanical and tribological properties of aluminum-magnesium nanocomposites processed by high-pressure torsion Materials Science and Engineering: A. 684: 318-327. DOI: 10.1016/J.Msea.2016.12.067 |
0.666 |
|
| 2017 |
Alizadeh R, Mahmudi R, Pereira P, Huang Y, Langdon T. Microstructural evolution and superplasticity in an Mg–Gd–Y–Zr alloy after processing by different SPD techniques Materials Science and Engineering: A. 682: 577-585. DOI: 10.1016/J.Msea.2016.11.080 |
0.57 |
|
| 2017 |
El-Tahawy M, Huang Y, Choi H, Choe H, Lábár JL, Langdon TG, Gubicza J. High temperature thermal stability of nanocrystalline 316L stainless steel processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 682: 323-331. DOI: 10.1016/J.Msea.2016.11.066 |
0.537 |
|
| 2017 |
Cepeda-Jiménez CM, Castillo-Rodríguez M, Molina-Aldareguia JM, Huang Y, Langdon TG, Pérez-Prado MT. Controlling the high temperature mechanical behavior of Al alloys by precipitation and severe straining Materials Science and Engineering A. 679: 36-47. DOI: 10.1016/J.Msea.2016.10.026 |
0.572 |
|
| 2017 |
Polyakova VV, Semenova IP, Polyakov AV, Magomedova DK, Huang Y, Langdon TG. Influence of grain boundary misorientations on the mechanical behavior of a near-α Ti-6Al-7Nb alloy processed by ECAP Materials Letters. 190: 256-259. DOI: 10.1016/J.Matlet.2016.12.083 |
0.566 |
|
| 2017 |
Chinh NQ, Jenei P, Gubicza J, Bobruk EV, Valiev RZ, Langdon TG. Influence of Zn content on the microstructure and mechanical performance of ultrafine-grained Al–Zn alloys processed by high-pressure torsion Materials Letters. 186: 334-337. DOI: 10.1016/J.Matlet.2016.09.114 |
0.624 |
|
| 2017 |
Kapoor G, Huang Y, Sarma VS, Langdon TG, Gubicza J. Evolution of the microstructure during annealing of ultrafine-grained Ni with different Mo contents Materials Characterization. 130: 56-63. DOI: 10.1016/J.Matchar.2017.05.034 |
0.575 |
|
| 2017 |
Huang Y, Sabbaghianrad S, Almazrouee AI, Al-Fadhalah KJ, Alhajeri SN, Zhang NX, Langdon TG. Comparisons of self-annealing behaviour of HPT-processed high purity Cu and a Pb–Sn alloy Journal of Materials Research and Technology. 6: 390-395. DOI: 10.1016/J.Jmrt.2017.07.002 |
0.84 |
|
| 2017 |
Kapoor G, Huang Y, Sarma VS, Langdon TG, Gubicza J. Influence of Mo alloying on the thermal stability and hardness of ultrafine-grained Ni processed by high-pressure torsion Journal of Materials Research and Technology. 6: 361-368. DOI: 10.1016/J.Jmrt.2017.05.009 |
0.568 |
|
| 2017 |
Pereira PHR, Huang Y, Langdon TG. Examining the microhardness evolution and thermal stability of an Al-Mg-Sc alloy processed by high-pressure torsion at a high temperature Journal of Materials Research and Technology. 6: 348-354. DOI: 10.1016/J.Jmrt.2017.05.008 |
0.549 |
|
| 2017 |
Alawadhi MY, Sabbaghianrad S, Huang Y, Langdon TG. Direct influence of recovery behaviour on mechanical properties in oxygen-free copper processed using different SPD techniques: HPT and ECAP Journal of Materials Research and Technology. 6: 369-377. DOI: 10.1016/J.Jmrt.2017.05.005 |
0.801 |
|
| 2017 |
Alsubaie SA, Huang Y, Langdon TG. Hardness evolution of AZ80 magnesium alloy processed by HPT at different temperatures Journal of Materials Research and Technology. 6: 378-384. DOI: 10.1016/J.Jmrt.2017.05.004 |
0.508 |
|
| 2017 |
Cardona DMM, Wongsa-Ngam J, Jimenez H, Langdon TG. Effects on hardness and microstructure of AISI 1020 low-carbon steel processed by high-pressure torsion Journal of Materials Research and Technology. 6: 355-360. DOI: 10.1016/J.Jmrt.2017.05.002 |
0.804 |
|
| 2017 |
El-Tahawy M, Huang Y, Um T, Choe H, Lábár JL, Langdon TG, Gubicza J. Stored energy in ultrafine-grained 316L stainless steel processed by high-pressure torsion ☆ Journal of Materials Research and Technology. 6: 339-347. DOI: 10.1016/J.Jmrt.2017.05.001 |
0.49 |
|
| 2017 |
Figueiredo RB, Langdon TG. Achieving superplastic properties in a ZK10 magnesium alloy processed by equal-channel angular pressing Journal of Materials Research and Technology. 6: 129-135. DOI: 10.1016/J.Jmrt.2016.05.005 |
0.762 |
|
| 2017 |
Bourezg YI, Azzeddine H, Hennet L, Thiaudière D, Huang Y, Bradai D, Langdon TG. The sequence and kinetics of pre-precipitation in Mg-Nd alloys after HPT processing: A synchrotron and DSC study Journal of Alloys and Compounds. 719: 236-241. DOI: 10.1016/J.Jallcom.2017.05.166 |
0.402 |
|
| 2017 |
Torbati-Sarraf SA, Sabbaghianrad S, Figueiredo RB, Langdon TG. Orientation imaging microscopy and microhardness in a ZK60 magnesium alloy processed by high-pressure torsion Journal of Alloys and Compounds. 712: 185-193. DOI: 10.1016/J.Jallcom.2017.04.054 |
0.876 |
|
| 2017 |
Heczel A, Kawasaki M, Lábár JL, Jang J, Langdon TG, Gubicza J. Defect structure and hardness in nanocrystalline CoCrFeMnNi High-Entropy Alloy processed by High-Pressure Torsion Journal of Alloys and Compounds. 711: 143-154. DOI: 10.1016/J.Jallcom.2017.03.352 |
0.656 |
|
| 2017 |
Jorge AM, Prokofiev E, Triques MRM, Roche V, Botta WJ, Kiminami CS, Raab GI, Valiev RZ, Langdon TG. Effect of cold rolling on the structure and hydrogen properties of AZ91 and AM60D magnesium alloys processed by ECAP International Journal of Hydrogen Energy. 42: 21822-21831. DOI: 10.1016/J.Ijhydene.2017.07.118 |
0.483 |
|
| 2017 |
Shahmir H, Langdon TG. Using heat treatments, high-pressure torsion and post-deformation annealing to optimize the properties of Ti-6Al-4V alloys Acta Materialia. 141: 419-426. DOI: 10.1016/J.Actamat.2017.09.018 |
0.546 |
|
| 2017 |
Lee D, Lee J, Zhao Y, Lu Z, Suh J, Kim J, Ramamurty U, Kawasaki M, Langdon TG, Jang J. Annealing effect on plastic flow in nanocrystalline CoCrFeMnNi high-entropy alloy: A nanomechanical analysis Acta Materialia. 140: 443-451. DOI: 10.1016/J.Actamat.2017.08.057 |
0.652 |
|
| 2017 |
Figueiredo RB, Sabbaghianrad S, Giwa A, Greer JR, Langdon TG. Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation Acta Materialia. 122: 322-331. DOI: 10.1016/J.Actamat.2016.09.054 |
0.872 |
|
| 2017 |
Figueiredo RB, Kawasaki M, Langdon TG. Developments in Processing by Severe Plastic Deformation at the 3rd Pan American Materials Congress Jom. 69: 2022-2023. DOI: 10.1007/S11837-017-2500-X |
0.692 |
|
| 2017 |
Koch CC, Langdon TG, Lavernia EJ. Bulk Nanostructured Materials Metallurgical and Materials Transactions A. 48: 5181-5199. DOI: 10.1007/S11661-017-4298-0 |
0.363 |
|
| 2017 |
Sun Y, Aindow M, Hebert RJ, Langdon TG, Lavernia EJ. High-pressure torsion-induced phase transformations and grain refinement in Al/Ti composites Journal of Materials Science. 52: 12170-12184. DOI: 10.1007/S10853-017-1331-Z |
0.531 |
|
| 2017 |
Alizadeh R, Mahmudi R, Ngan AHW, Langdon TG. Microstructural evolution during hot shear deformation of an extruded fine-grained Mg–Gd–Y–Zr alloy Journal of Materials Science. 52: 7843-7857. DOI: 10.1007/S10853-017-1031-8 |
0.571 |
|
| 2017 |
Silva CLP, Oliveira AC, Costa CGF, Figueiredo RB, de Fátima Leite M, Pereira MM, Lins VFC, Langdon TG. Effect of severe plastic deformation on the biocompatibility and corrosion rate of pure magnesium Journal of Materials Science. 52: 5992-6003. DOI: 10.1007/S10853-017-0835-X |
0.733 |
|
| 2017 |
Zhilyaev AP, Morozova A, Cabrera JM, Kaibyshev R, Langdon TG. Wear resistance and electroconductivity in a Cu–0.3Cr–0.5Zr alloy processed by ECAP Journal of Materials Science. 52: 305-313. DOI: 10.1007/S10853-016-0331-8 |
0.541 |
|
| 2017 |
Liu DX, Pang X, Li DL, Guo CG, Wongsa-Ngam J, Langdon TG, Meyers MA. Microstructural evolution and properties of a hot extruded and HPT-processed resorbable magnesium WE43 alloy Advanced Engineering Materials. 19: 1600698. DOI: 10.1002/Adem.201600698 |
0.844 |
|
| 2016 |
Huang Y, Millet J, Zhang NX, Pereira PHR, Langdon TG. Recovery or Non-Recovery in Al-0.1% Mg and Al-1% Mg Alloy during High-Pressure Torsion Processing Materials Science Forum. 879: 773-778. DOI: 10.4028/Www.Scientific.Net/Msf.879.773 |
0.486 |
|
| 2016 |
Heczel A, Lilensten L, Bourgon J, Perrière L, Couzine JP, Guillot I, Dirras G, Huang Y, Langdon TG, Gubicza J. Influence of High-Pressure Torsion on the Microstructure and the Hardness of a Ti-Rich High-Entropy Alloy Materials Science Forum. 879: 732-737. DOI: 10.4028/Www.Scientific.Net/Msf.879.732 |
0.57 |
|
| 2016 |
El-Tahawy M, Gubicza J, Huang Y, Choi HL, Choe HM, Lábár JL, Langdon TG. Evolution of microstructure, phase composition and hardness in 316L stainless steel processed by high-pressure torsion Materials Science Forum. 879: 502-507. DOI: 10.4028/Www.Scientific.Net/Msf.879.502 |
0.507 |
|
| 2016 |
Kawasaki M, Figueiredo RB, Langdon TG. The Development of Superplasticity and Deformation Mechanism Maps in an Ultrafine-Grained Magnesium Alloy Materials Science Forum. 879: 48-53. DOI: 10.4028/Www.Scientific.Net/Msf.879.48 |
0.769 |
|
| 2016 |
Kawasaki M, Jang JI, Ahn BM, Langdon TG. Micro-Mechanical Responses of Ultrafine-Grained Materials Processed through High-Pressure Torsion Materials Science Forum. 879: 42-47. DOI: 10.4028/Www.Scientific.Net/Msf.879.42 |
0.701 |
|
| 2016 |
Pereira PHR, Huang Y, Langdon TG. Influence of Initial Heat Treatment on the Microhardness Evolution of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion Materials Science Forum. 879: 1471-1476. DOI: 10.4028/Www.Scientific.Net/Msf.879.1471 |
0.493 |
|
| 2016 |
Alsubaie SA, Huang Y, Langdon TG. Hardness Homogeneity in an AZ80 Magnesium Alloy Processed by High-Pressure Torsion Materials Science Forum. 879: 139-144. DOI: 10.4028/Www.Scientific.Net/Msf.879.139 |
0.532 |
|
| 2016 |
Lee HJ, Han JK, Ahn BM, Kawasaki M, Langdon TG. Mechanical Behavior of a Metal Matrix Nanocomposite Synthesized by High-Pressure Torsion via Diffusion Bonding Materials Science Forum. 879: 1068-1073. DOI: 10.4028/Www.Scientific.Net/Msf.879.1068 |
0.609 |
|
| 2016 |
Kumar P, Kawasaki M, Langdon TG. Resolving the Strength-Ductility Paradox through Severe Plastic Deformation of a Cast Al-7% Si Alloy Materials Science Forum. 879: 1043-1048. DOI: 10.4028/Www.Scientific.Net/Msf.879.1043 |
0.722 |
|
| 2016 |
Kawasaki M, Langdon TG. Description of the superplastic flow process by deformation mechanism maps in ultrafine-grained materials Materials Science Forum. 838: 51-58. DOI: 10.4028/Www.Scientific.Net/Msf.838-839.51 |
0.672 |
|
| 2016 |
Loucif A, Huang Y, Helbert AL, Baudin T, Sabbaghianrad S, Langdon TG. Microtextural changes and superplasticity in an Al-7075 alloy processed by high-pressure torsion Materials Science Forum. 838: 445-450. DOI: 10.4028/Www.Scientific.Net/Msf.838-839.445 |
0.823 |
|
| 2016 |
Figueiredo RB, Langdon TG. Development of an ω-Phase in Grade 2 Titanium Processed by HPT at High Hydrostatic Pressure Materials Research. 19: 1144-1148. DOI: 10.1590/1980-5373-Mr-2016-0403 |
0.65 |
|
| 2016 |
Huang Y, Kawasaki M, Langdon TG. Investigating Anvil Alignment and Anvil Roughness on Flow Pattern Development in High-Pressure Torsion Mrs Proceedings. 1818. DOI: 10.1557/Opl.2016.79 |
0.534 |
|
| 2016 |
Yang C, Song M, Liu Y, Ni S, Sabbaghianrad S, Langdon TG. Evidence for a transition in deformation mechanism in nanocrystalline pure titanium processed by high-pressure torsion Philosophical Magazine. 1-11. DOI: 10.1080/14786435.2016.1177230 |
0.814 |
|
| 2016 |
Shahmir H, He J, Lu Z, Kawasaki M, Langdon TG. Effect of annealing on mechanical properties of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion Materials Science and Engineering A. 676: 294-303. DOI: 10.1016/J.Msea.2016.08.118 |
0.692 |
|
| 2016 |
Shahmir H, Pereira PHR, Huang Y, Langdon TG. Mechanical properties and microstructural evolution of nanocrystalline titanium at elevated temperatures Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 669: 358-366. DOI: 10.1016/J.Msea.2016.05.105 |
0.488 |
|
| 2016 |
Shahmir H, Langdon TG. Characteristics of the allotropic phase transformation in titanium processed by high-pressure torsion using different rotation speeds Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 667: 293-299. DOI: 10.1016/J.Msea.2016.05.001 |
0.382 |
|
| 2016 |
Zhang NX, Chinh NQ, Kawasaki M, Huang Y, Langdon TG. Self-annealing in a two-phase Pb-Sn alloy after processing by high-pressure torsion Materials Science and Engineering A. 666: 350-359. DOI: 10.1016/J.Msea.2016.04.058 |
0.66 |
|
| 2016 |
Li Z, Zhang PF, Yuan H, Lin K, Liu Y, Yin DL, Wang JT, Langdon TG. Principle of one-step synthesis for multilayered structures using tube high-pressure shearing Materials Science and Engineering A. 658: 367-375. DOI: 10.1016/J.Msea.2016.02.024 |
0.36 |
|
| 2016 |
Gubicza J, El-Tahawy M, Huang Y, Choi H, Choe H, Lábár JL, Langdon TG. Microstructure, phase composition and hardness evolution in 316L stainless steel processed by high-pressure torsion Materials Science and Engineering A. 657: 215-223. DOI: 10.1016/J.Msea.2016.01.057 |
0.543 |
|
| 2016 |
Huang Y, Sabbaghianrad S, Almazrouee AI, Al-Fadhalah KJ, Alhajeri SN, Langdon TG. The significance of self-annealing at room temperature in high purity copper processed by high-pressure torsion Materials Science and Engineering A. 656: 55-66. DOI: 10.1016/J.Msea.2016.01.027 |
0.796 |
|
| 2016 |
Huang Y, Lemang M, Zhang NX, Pereira PHR, Langdon TG. Achieving superior grain refinement and mechanical properties in vanadium through high-pressure torsion and subsequent short-term annealing Materials Science and Engineering A. 655: 60-69. DOI: 10.1016/J.Msea.2015.12.086 |
0.559 |
|
| 2016 |
Sabbaghianrad S, Langdon TG. Developing superplasticity in an aluminum matrix composite processed by high-pressure torsion Materials Science and Engineering A. 655: 36-43. DOI: 10.1016/J.Msea.2015.12.078 |
0.834 |
|
| 2016 |
Alizadeh R, Mahmudi R, Ngan AHW, Huang Y, Langdon TG. Superplasticity of a nano-grained Mg-Gd-Y-Zr alloy processed by high-pressure torsion Materials Science and Engineering A. 651: 786-794. DOI: 10.1016/J.Msea.2015.10.094 |
0.569 |
|
| 2016 |
Tang Q, Huang Y, Cheng H, Liao X, Langdon TG, Dai P. The effect of grain size on the annealing-induced phase transformation in an Al0·3CoCrFeNi high entropy alloy Materials and Design. 105: 381-385. DOI: 10.1016/J.Matdes.2016.05.079 |
0.406 |
|
| 2016 |
Alhajeri SN, Al-Fadhalah KJ, Almazrouee AI, Langdon TG. Microstructure and microhardness of an Al-6061 metal matrix composite processed by high-pressure torsion Materials Characterization. 118: 270-278. DOI: 10.1016/J.Matchar.2016.06.003 |
0.537 |
|
| 2016 |
Bhovi PM, Patil DC, Kori SA, Venkateswarlu K, Huang Y, Langdon TG. A comparison of repetitive corrugation and straightening and high-pressure torsion using an Al-Mg-Sc alloy Journal of Materials Research and Technology. 5: 353-359. DOI: 10.1016/J.Jmrt.2016.03.009 |
0.618 |
|
| 2016 |
Alsubaie SA, Bazarnik P, Lewandowska M, Huang Y, Langdon TG. Evolution of microstructure and hardness in an AZ80 magnesium alloy processed by high-pressure torsion Journal of Materials Research and Technology. 5: 152-158. DOI: 10.1016/J.Jmrt.2015.11.006 |
0.603 |
|
| 2016 |
Bazarnik P, Romelczyk B, Huang Y, Lewandowska M, Langdon TG. Effect of applied pressure on microstructure development and homogeneity in an aluminium alloy processed by high-pressure torsion Journal of Alloys and Compounds. 688: 736-745. DOI: 10.1016/J.Jallcom.2016.07.149 |
0.481 |
|
| 2016 |
Lee HJ, Han JK, Janakiraman S, Ahn B, Kawasaki M, Langdon TG. Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion Journal of Alloys and Compounds. 686: 998-1007. DOI: 10.1016/J.Jallcom.2016.06.194 |
0.724 |
|
| 2016 |
Phan TQ, Levine LE, Lee IF, Xu R, Tischler JZ, Huang Y, Langdon TG, Kassner ME. Synchrotron X-ray microbeam diffraction measurements of full elastic long range internal strain and stress tensors in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing Acta Materialia. 112: 231-241. DOI: 10.1016/J.Actamat.2016.04.035 |
0.45 |
|
| 2016 |
Lee DH, Seok MY, Zhao Y, Choi IC, He J, Lu Z, Suh JY, Ramamurty U, Kawasaki M, Langdon TG, Jang JI. Spherical nanoindentation creep behavior of nanocrystalline and coarse-grained CoCrFeMnNi high-entropy alloys Acta Materialia. 109: 314-322. DOI: 10.1016/J.Actamat.2016.02.049 |
0.703 |
|
| 2016 |
Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer MJ, Zhu Y. Producing Bulk Ultrafine-Grained Materials by Severe Plastic Deformation: Ten Years Later Jom. 1-11. DOI: 10.1007/S11837-016-1820-6 |
0.518 |
|
| 2016 |
Alizadeh R, Mahmudi R, Ngan AHW, Pereira PHR, Huang Y, Langdon TG. Microstructure, Texture, and Superplasticity of a Fine-Grained Mg-Gd-Zr Alloy Processed by Equal-Channel Angular Pressing Metallurgical and Materials Transactions A. 47: 6056-6069. DOI: 10.1007/S11661-016-3765-3 |
0.57 |
|
| 2016 |
Balasubramanian N, Langdon TG. The Strength–Grain Size Relationship in Ultrafine-Grained Metals Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 1-12. DOI: 10.1007/S11661-016-3499-2 |
0.621 |
|
| 2016 |
Wang CT, Hakala TJ, Laukkanen A, Ronkainen H, Holmberg K, Gao N, Wood RJK, Langdon TG. An investigation into the effect of substrate on the load-bearing capacity of thin hard coatings Journal of Materials Science. 51: 4390-4398. DOI: 10.1007/S10853-016-9751-8 |
0.373 |
|
| 2016 |
Figueiredo RB, Poggiali FSJ, Silva CLP, Cetlin PR, Langdon TG. The influence of grain size and strain rate on the mechanical behavior of pure magnesium Journal of Materials Science. 51: 3013-3024. DOI: 10.1007/S10853-015-9612-X |
0.712 |
|
| 2016 |
Xu J, Li J, Wang CT, Shan D, Guo B, Langdon TG. Evidence for an early softening behavior in pure copper processed by high-pressure torsion Journal of Materials Science. 51: 1923-1930. DOI: 10.1007/S10853-015-9499-6 |
0.452 |
|
| 2016 |
Kawasaki M, Ahn B, Kumar P, Jang J, Langdon TG. Nano- and Micro-Mechanical Properties of Ultrafine-Grained Materials Processed by Severe Plastic Deformation Techniques Advanced Engineering Materials. 19: 1600578. DOI: 10.1002/Adem.201600578 |
0.651 |
|
| 2016 |
Semenova IP, Polyakov AV, Polyakova VV, Huang Y, Valiev RZ, Langdon TG. High‐Cycle Fatigue Behavior of an Ultrafine‐Grained Ti–6Al–4V Alloy Processed by ECAP and Extrusion Advanced Engineering Materials. 18: 2057-2062. DOI: 10.1002/Adem.201500630 |
0.497 |
|
| 2016 |
Ahn B, Lee HJ, Choi IC, Kawasaki M, Jang JI, Langdon TG. Micro-Mechanical Behavior of an Exceptionally Strong Metal Matrix Nanocomposite Processed by High-Pressure Torsion Advanced Engineering Materials. DOI: 10.1002/Adem.201500520 |
0.677 |
|
| 2016 |
Alizadeh R, Mahmudi R, Ngan AHW, Langdon TG. An Unusual Extrusion Texture in Mg–Gd–Y–Zr Alloys Advanced Engineering Materials. 18: 1044-1049. DOI: 10.1002/Adem.201500516 |
0.559 |
|
| 2016 |
Li J, Xu J, Wang CT, Shan D, Guo B, Langdon TG. Microstructural Evolution and Micro-Compression in High-Purity Copper Processed by High-Pressure Torsion Advanced Engineering Materials. 18: 241-250. DOI: 10.1002/Adem.201500488 |
0.533 |
|
| 2015 |
Langdon TG. Strengthening and weakening in the processing of ultrafine-grained metals Kovove Materialy. 53: 213-219. DOI: 10.4149/km-2015-4-213 |
0.39 |
|
| 2015 |
Huang Y, Pereira PHR, Figueiredo RB, Baudin T, Helbert A, Brisset F, Langdon TG. An evaluation of high temperature tensile properties for a magnesium AZ31 alloy processed by high-pressure torsion Letters On Materials. 5: 341-346. DOI: 10.22226/2410-3535-2015-3-341-346 |
0.77 |
|
| 2015 |
Sabbaghianrad S, Langdon TG. Microstructural saturation, hardness stability and superplasticity in ultrafine-grained metals processed by a combination of severe plastic deformation techniques Letters On Materials. 5: 335-340. DOI: 10.22226/2410-3535-2015-3-335-340 |
0.856 |
|
| 2015 |
Wang CT, Langdon TG. Achieving superplasticity in a Bi-Sn alloy processed by high-pressure torsion Letters On Materials. 5: 301-305. DOI: 10.22226/2410-3535-2015-3-301-305 |
0.617 |
|
| 2015 |
Pereira PHR, Huang Y, Langdon TG. Examining the mechanical properties and superplastic behaviour in an Al-Mg-Sc alloy after processing by HPT Letters On Materials. 5: 294-300. DOI: 10.22226/2410-3535-2015-3-294-300 |
0.588 |
|
| 2015 |
Torbati-Sarraf S, Sabbaghianrad S, Langdon TG. Microstructural properties, thermal stability and superplasticity of a ZK60 Mg alloy processed by high-pressure torsion Letters On Materials. 5: 287-293. DOI: 10.22226/2410-3535-2015-3-287-293 |
0.854 |
|
| 2015 |
Fu J, Ding H, Huang Y, Pereira PHR, Zhang W, Langdon TG. Grain refining of a Ti-6Al-4V alloy by high-pressure torsion and low temperature superplasticity Letters On Materials. 5: 281-286. DOI: 10.22226/2410-3535-2015-3-281-286 |
0.611 |
|
| 2015 |
Kawasaki M, Figueiredo RB, Langdon TG. Achieving superplasticity through severe plastic deformation Letters On Materials. 5: 233-239. DOI: 10.22226/2410-3535-2015-3-233-239 |
0.785 |
|
| 2015 |
Kammers AD, Wongsa-Ngam J, Langdon TG, Daly S. The microstructure length scale of strain rate sensitivity in ultrafine-grained aluminum Journal of Materials Research. 30: 981-992. DOI: 10.1557/Jmr.2015.58 |
0.835 |
|
| 2015 |
Kawasaki M, Ahn B, Lee H, Zhilyaev AP, Langdon TG. Using high-pressure torsion to process an aluminum–magnesium nanocomposite through diffusion bonding Journal of Materials Research. DOI: 10.1557/Jmr.2015.257 |
0.636 |
|
| 2015 |
Lee DH, Choi IC, Seok MY, He J, Lu Z, Suh JY, Kawasaki M, Langdon TG, Jang Ji. Nanomechanical behavior and structural stability of a nanocrystalline CoCrFeNiMn high-entropy alloy processed by high-pressure torsion Journal of Materials Research. DOI: 10.1557/Jmr.2015.239 |
0.718 |
|
| 2015 |
Sabbaghianrad S, Langdon TG. Mechanical Properties and Microstructural Behavior of a Metal Matrix Composite Processed by Severe Plastic Deformation Techniques Mrs Advances. 1: 3865-3870. DOI: 10.1557/Adv.2015.7 |
0.835 |
|
| 2015 |
Kawasaki M, Langdon TG. Developing superplasticity in ultrafine-grained metals Acta Physica Polonica A. 128: 470-478. DOI: 10.12693/Aphyspola.128.470 |
0.706 |
|
| 2015 |
Valiev R, Estrin Y, Horita Z, Langdon T, Zehetbauer M, Zhu Y. Fundamentals of Superior Properties in Bulk NanoSPD Materials Materials Research Letters. 4: 1-21. DOI: 10.1080/21663831.2015.1060543 |
0.343 |
|
| 2015 |
Azzeddine H, Harfouche M, Hennet L, Thiaudiere D, Kawasaki M, Bradai D, Langdon TG. An X-ray absorption spectroscopy investigation of the local atomic structure in Cu-Ni-Si alloy after severe plastic deformation and ageing Philosophical Magazine. 95: 2482-2490. DOI: 10.1080/14786435.2015.1063790 |
0.599 |
|
| 2015 |
An XH, Zhu SM, Cao Y, Kawasaki M, Liao XZ, Ringer SP, Nie JF, Langdon TG, Zhu YT. Atomic-scale investigation of interface-facilitated deformation twinning in severely deformed Ag-Cu nanolamellar composites Applied Physics Letters. 107. DOI: 10.1063/1.4926370 |
0.534 |
|
| 2015 |
Li J, Wongsa-Ngam J, Xu J, Shan D, Guo B, Langdon TG. Wear resistance of an ultrafine-grained Cu-Zr alloy processed by equal-channel angular pressing Wear. 326: 10-19. DOI: 10.1016/J.Wear.2014.12.022 |
0.854 |
|
| 2015 |
Cao Y, Wang YB, An XH, Liao XZ, Kawasaki M, Ringer SP, Langdon TG, Zhu YT. Grain boundary formation by remnant dislocations from the de-twinning of thin nano-twins Scripta Materialia. 100: 98-101. DOI: 10.1016/J.Scriptamat.2015.01.001 |
0.613 |
|
| 2015 |
Choi IC, Lee DH, Ahn B, Durst K, Kawasaki M, Langdon TG, Jang JI. Enhancement of strain-rate sensitivity and shear yield strength of a magnesium alloy processed by high-pressure torsion Scripta Materialia. 94: 44-47. DOI: 10.1016/J.Scriptamat.2014.09.014 |
0.718 |
|
| 2015 |
Xu J, Zhu X, Shan D, Guo B, Langdon TG. Effect of grain size and specimen dimensions on micro-forming of high purity aluminum Materials Science and Engineering A. 646: 207-217. DOI: 10.1016/J.Msea.2015.08.060 |
0.544 |
|
| 2015 |
Zhang S, Wang YC, Zhilyaev AP, Korznikova E, Li S, Raab GI, Langdon TG. Effect of grain size on compressive behaviour of titanium at different strain rates Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 645: 311-317. DOI: 10.1016/J.Msea.2015.08.031 |
0.523 |
|
| 2015 |
Zhang S, Wang YC, Zhilyaev AP, Korznikova E, Li S, Raab GI, Langdon TG. Temperature and strain rate dependence of microstructural evolution and dynamic mechanical behavior in nanocrystalline Ti Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 641: 29-36. DOI: 10.1016/J.Msea.2015.06.035 |
0.45 |
|
| 2015 |
Almazrouee AI, Al-Fadhalah KJ, Alhajeri SN, Langdon TG. Microstructure and microhardness of OFHC copper processed by high-pressure torsion Materials Science and Engineering A. 641: 21-28. DOI: 10.1016/J.Msea.2015.06.016 |
0.535 |
|
| 2015 |
Maury N, Zhang NX, Huang Y, Zhilyaev AP, Langdon TG. A critical examination of pure tantalum processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 638: 174-182. DOI: 10.1016/J.Msea.2015.04.053 |
0.545 |
|
| 2015 |
Ahn B, Zhilyaev AP, Lee HJ, Kawasaki M, Langdon TG. Rapid synthesis of an extra hard metal matrix nanocomposite at ambient temperature Materials Science and Engineering A. 635: 109-117. DOI: 10.1016/J.Msea.2015.03.042 |
0.585 |
|
| 2015 |
Zhang S, Wang YC, Zhilyaev AP, Gunderov DV, Li S, Raab GI, Korznikova E, Langdon TG. Effect of temperature on microstructural stabilization and mechanical properties in the dynamic testing of nanocrystalline pure Ti Materials Science and Engineering: A. 634: 64-70. DOI: 10.1016/J.Msea.2015.03.032 |
0.454 |
|
| 2015 |
Pereira PHR, Figueiredo RB, Cetlin PR, Langdon TG. An examination of the elastic distortions of anvils in high-pressure torsion Materials Science and Engineering A. 631: 201-208. DOI: 10.1016/J.Msea.2015.02.052 |
0.654 |
|
| 2015 |
Lee HJ, Lee SK, Jung KH, Lee GA, Ahn B, Kawasaki M, Langdon TG. Evolution in hardness and texture of a ZK60A magnesium alloy processed by high-pressure torsion Materials Science and Engineering A. 630: 90-98. DOI: 10.1016/J.Msea.2015.02.011 |
0.685 |
|
| 2015 |
Shahmir H, Nili-Ahmadabadi M, Wang CT, Jung JM, Kim HS, Langdon TG. Annealing behavior and shape memory effect in NiTi alloy processed by equal-channel angular pressing at room temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 629: 16-22. DOI: 10.1016/J.Msea.2015.01.072 |
0.423 |
|
| 2015 |
Tao J, Chen G, Jian W, Wang J, Zhu Y, Zhu X, Langdon TG. Anneal hardening of a nanostructured Cu–Al alloy processed by high-pressure torsion and rolling Materials Science and Engineering: A. 628: 207-215. DOI: 10.1016/J.Msea.2015.01.055 |
0.594 |
|
| 2015 |
Shahmir H, Nili-Ahmadabadi M, Huang Y, Jung JM, Kim HS, Langdon TG. Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 626: 203-206. DOI: 10.1016/J.Msea.2014.12.056 |
0.495 |
|
| 2015 |
Bazarnik P, Huang Y, Lewandowska M, Langdon TG. Structural impact on the Hall–Petch relationship in an Al–5Mg alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 626: 9-15. DOI: 10.1016/J.Msea.2014.12.027 |
0.589 |
|
| 2015 |
Figueiredo RB, Sicupira FL, Malheiros LRC, Kawasaki M, Santos DB, Langdon TG. Formation of epsilon martensite by high-pressure torsion in a TRIP steel Materials Science and Engineering A. 625: 114-118. DOI: 10.1016/J.Msea.2014.11.091 |
0.731 |
|
| 2015 |
Tang QH, Huang Y, Huang YY, Liao XZ, Langdon TG, Dai PQ. Hardening of an Al0.3CoCrFeNi high entropy alloy via high-pressure torsion and thermal annealing Materials Letters. 151: 126-129. DOI: 10.1016/J.Matlet.2015.03.066 |
0.529 |
|
| 2015 |
Lee HJ, Ahn B, Kawasaki M, Langdon TG. Evolution in hardness and microstructure of ZK60A magnesium alloy processed by high-pressure torsion Journal of Materials Research and Technology. 4: 18-25. DOI: 10.1016/J.Jmrt.2014.10.015 |
0.707 |
|
| 2015 |
Sharman K, Bazarnik P, Brynk T, Bulutsuz AG, Lewandowska M, Huang Y, Langdon TG. Enhancement in mechanical properties of a β-titanium alloy by high-pressure torsion Journal of Materials Research and Technology. 4: 79-83. DOI: 10.1016/J.Jmrt.2014.10.010 |
0.57 |
|
| 2015 |
Malheiros LRC, Figueiredo RB, Langdon TG. Grain size and microhardness evolution during annealing of a magnesium alloy processed by high-pressure torsion Journal of Materials Research and Technology. 4: 14-17. DOI: 10.1016/J.Jmrt.2014.10.008 |
0.698 |
|
| 2015 |
Hadj Larbi F, Azzeddine H, Baudin T, Mathon MH, Brisset F, Helbert AL, Kawasaki M, Bradai D, Langdon TG. Microstructure and texture evolution in a Cu-Ni-Si alloy processed by equal-channel angular pressing Journal of Alloys and Compounds. 638: 88-94. DOI: 10.1016/J.Jallcom.2015.03.062 |
0.712 |
|
| 2015 |
Zhang Y, Sabbaghianrad S, Yang H, Topping TD, Langdon TG, Lavernia EJ, Schoenung JM, Nutt SR. Two-Step SPD Processing of a Trimodal Al-Based Nano-Composite Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5877-5886. DOI: 10.1007/S11661-015-3151-6 |
0.82 |
|
| 2015 |
Xu J, Wang X, Shirooyeh M, Xing G, Shan D, Guo B, Langdon TG. Microhardness, microstructure and tensile behavior of an AZ31 magnesium alloy processed by high-pressure torsion Journal of Materials Science. 50: 7424-7436. DOI: 10.1007/S10853-015-9300-X |
0.629 |
|
| 2015 |
Kawasaki M, Lee HJ, Langdon TG. Microstructural homogeneity and superplastic behavior in an aluminum–copper eutectic alloy processed by high-pressure torsion Journal of Materials Science. 50: 6700-6712. DOI: 10.1007/S10853-015-9224-5 |
0.7 |
|
| 2015 |
Kawasaki M, Langdon TG. Review: achieving superplastic properties in ultrafine-grained materials at high temperatures Journal of Materials Science. DOI: 10.1007/S10853-015-9176-9 |
0.696 |
|
| 2015 |
Kumar P, Kawasaki M, Langdon TG. Review: Overcoming the paradox of strength and ductility in ultrafine-grained materials at low temperatures Journal of Materials Science. DOI: 10.1007/S10853-015-9143-5 |
0.676 |
|
| 2015 |
Alizadeh R, Mahmudi R, Ngan AHW, Langdon TG. Microstructural stability and grain growth kinetics in an extruded fine-grained Mg–Gd–Y–Zr alloy Journal of Materials Science. 50: 4940-4951. DOI: 10.1007/S10853-015-9041-X |
0.525 |
|
| 2015 |
Sabbaghianrad S, Langdon TG. An evaluation of the saturation hardness in an ultrafine-grained aluminum 7075 alloy processed using different techniques Journal of Materials Science. 50: 4357-4365. DOI: 10.1007/S10853-015-8989-X |
0.839 |
|
| 2015 |
Shahmir H, Nili-Ahmadabadi M, Razzaghi A, Mohammadi M, Wang CT, Jung JM, Kim HS, Langdon TG. Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy Journal of Materials Science. 50: 4003-4011. DOI: 10.1007/S10853-015-8957-5 |
0.537 |
|
| 2015 |
Shirooyeh M, Dillon RP, Sosa SS, Imamura PH, Mecartney ML, Langdon TG. Superplasticity and superplastic-like flow in cubic zirconia with silica Journal of Materials Science. 50: 3716-3726. DOI: 10.1007/S10853-015-8932-1 |
0.816 |
|
| 2015 |
Mungole T, Kumar P, Kawasaki M, Langdon TG. The contribution of grain boundary sliding in tensile deformation of an ultrafine-grained aluminum alloy having high strength and high ductility Journal of Materials Science. 50: 3549-3561. DOI: 10.1007/S10853-015-8915-2 |
0.707 |
|
| 2015 |
Zhang HY, Wang CT, Wang YC, Li SK, Zou H, Langdon TG. Microstructural evolution and microhardness variations in a Cu–36Zn–2Pb alloy processed by high-pressure torsion Journal of Materials Science. 50: 1535-1543. DOI: 10.1007/S10853-014-8713-2 |
0.592 |
|
| 2015 |
Kawasaki M, Figueiredo RB, Langdon TG. The requirements for superplasticity with an emphasis on magnesium alloys Advanced Engineering Materials. DOI: 10.1002/Adem.201500068 |
0.801 |
|
| 2015 |
Xu J, Zhu X, Shi L, Shan D, Guo B, Langdon TG. Micro-forming using ultrafine-grained aluminum processed by equal-channel angular pressing Advanced Engineering Materials. 17: 1022-1033. DOI: 10.1002/Adem.201400448 |
0.556 |
|
| 2015 |
Shahmir H, Nili-Ahmadabadi M, Mansouri-Arani M, Khajezade A, Langdon TG. Evaluating the room temperature ECAP processing of a NiTi alloy via simulation and experiments Advanced Engineering Materials. 17: 532-538. DOI: 10.1002/Adem.201400248 |
0.552 |
|
| 2014 |
Huang Y, Kawasaki M, Langdon TG. Factors influencing the shearing patterns in high-pressure torsion Materials Science Forum. 45-50. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.45 |
0.575 |
|
| 2014 |
Xu C, Langdon TG. Development of Homogeneity in an Al-6061 Alloy Processed by ECAP and ECAP-Conform Materials Science Forum. 294-299. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.294 |
0.615 |
|
| 2014 |
Xu J, Guo B, Shan DB, Langdon TG. Micro-Tensile Behavior at a High Temperature in an AZ31 Magnesium Alloy Processed by ECAP Materials Science Forum. 2726-2731. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.2726 |
0.571 |
|
| 2014 |
Wang CT, Fox AG, Langdon TG. An investigation of hardness homogenienty and microstructure in pure titanium processed by high pressure torsion Advanced Materials Research. 783: 2701-2706. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.2701 |
0.51 |
|
| 2014 |
Kawasaki M, Langdon TG. Microstructure development and superplasticity in a Zn-22% Al eutectoid alloy processed by severe plastic deformation Materials Science Forum. 2647-2652. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.2647 |
0.702 |
|
| 2014 |
Wongsa-Ngam J, Langdon TG. Microstructural evolution and grain refinement in a Cu-Zr alloy processed by high-pressure torsion Materials Science Forum. 783: 2635-2640. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.2635 |
0.856 |
|
| 2014 |
Malheiros LRC, Figueiredo RB, Langdon TG. Processing different magnesium alloys through HPT Materials Science Forum. 783: 2617-2622. DOI: 10.4028/Www.Scientific.Net/Msf.783-786.2617 |
0.728 |
|
| 2014 |
Torbati-Sarraf SA, Langdon TG. Mechanical Properties of ZK60 Magnesium Alloy Processed by High-Pressure Torsion Advanced Materials Research. 922: 767-772. DOI: 10.4028/Www.Scientific.Net/Amr.922.767 |
0.581 |
|
| 2014 |
Sabbaghianrad S, Langdon TG. An investigation of mechanical properties and microstructural evolution in an aluminum alloy processed by severe plastic deformation Advanced Materials Research. 922: 610-615. DOI: 10.4028/Www.Scientific.Net/Amr.922.610 |
0.842 |
|
| 2014 |
Pereira PHR, Costa THP, Figueiredo RB, Cetlin PR, Langdon TG. Analysis of plastic deformation and sample geometry during the compression stage in high-pressure torsion Advanced Materials Research. 922: 592-597. DOI: 10.4028/Www.Scientific.Net/Amr.922.592 |
0.685 |
|
| 2014 |
Langdon TG. The flow behavior of ultrafine-grained materials Advanced Materials Research. 1013: 7-14. DOI: 10.4028/Www.Scientific.Net/Amr.1013.7 |
0.565 |
|
| 2014 |
Kawasaki M, Figueiredo RB, Langdon TG. The flow characteristics of superplasticity Letters On Materials. 4: 78-83. DOI: 10.22226/2410-3535-2014-2-78-83 |
0.714 |
|
| 2014 |
Kawasaki M, Langdon TG. Producing ultrafine-grained materials through severe plastic deformation Emerging Materials Research. 3: 252-260. DOI: 10.1680/Emr.14.00012 |
0.679 |
|
| 2014 |
Mungole T, Kumar P, Kawasaki M, Langdon TG. A critical examination of the paradox of strength and ductility in ultrafine-grained metals Journal of Materials Research. 29: 2534-2546. DOI: 10.1557/Jmr.2014.272 |
0.59 |
|
| 2014 |
Kammers AD, Wongsa-Ngam J, Langdon TG, Daly S. The effect of microstructure heterogeneity on the microscale deformation of ultrafine-grained aluminum Journal of Materials Research. 30. DOI: 10.1557/Jmr.2014.207 |
0.847 |
|
| 2014 |
Bahmanpour H, Sun Y, Hu T, Zhang D, Wongsa-Ngam J, Langdon TG, Lavernia EJ. Microstructural evolution of cryomilled Ti/Al mixture during high-pressure torsion Journal of Materials Research. 29: 578-585. DOI: 10.1557/Jmr.2014.18 |
0.827 |
|
| 2014 |
Shahmir H, Nili-Ahmadabadi M, Langdon TG. Shape memory effect of NiTi alloy processed by equal-channel angular pressing followed by post deformation annealing Iop Conference Series: Materials Science and Engineering. 63: 012111. DOI: 10.1088/1757-899X/63/1/012111 |
0.355 |
|
| 2014 |
Wang CT, Langdon TG. Strain weakening and superplasticity in a Bi-Sn eutectic alloy processed by high-pressure torsion Iop Conference Series: Materials Science and Engineering. 63. DOI: 10.1088/1757-899X/63/1/012107 |
0.485 |
|
| 2014 |
Ghasemi-Nanesa H, Nili-Ahmadabadi M, Koohdar H, Habibi-Parsa M, Hossein Nedjad S, Alidokht S, Langdon TG. Strain-induced martensite to austenite reverse transformation in an ultrafine-grained Fe–Ni–Mn martensitic steel Philosophical Magazine. 94: 1493-1507. DOI: 10.1080/14786435.2014.886785 |
0.354 |
|
| 2014 |
Phan TQ, Lee IF, Levine LE, Tischler JZ, Huang Y, Fox AG, Langdon TG, Kassner ME. X-ray microbeam measurements of long-range internal stresses in commercial-purity aluminum processed by multiple passes of equal-channel angular pressing Scripta Materialia. 93: 48-51. DOI: 10.1016/J.Scriptamat.2014.09.001 |
0.36 |
|
| 2014 |
Wang L, Wang YC, Zhilyaev AP, Korznikov AV, Li SK, Korznikova E, Langdon TG. Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression Scripta Materialia. 77: 33-36. DOI: 10.1016/J.Scriptamat.2014.01.011 |
0.53 |
|
| 2014 |
Choi I, Kim Y, Ahn B, Kawasaki M, Langdon TG, Jang J. Evolution of plasticity, strain-rate sensitivity and the underlying deformation mechanism in Zn–22% Al during high-pressure torsion Scripta Materialia. 75: 102-105. DOI: 10.1016/J.Scriptamat.2013.12.003 |
0.629 |
|
| 2014 |
An XH, Song M, Huang Y, Liao XZ, Ringer SP, Langdon TG, Zhu YT. Twinning via the motion of incoherent twin boundaries nucleated at grain boundaries in a nanocrystalline Cu alloy Scripta Materialia. 72: 35-38. DOI: 10.1016/J.Scriptamat.2013.10.014 |
0.533 |
|
| 2014 |
Figueiredo RB, Eduardo ER, Zhao X, Yang X, Liu X, Cetlin PR, Langdon TG. Improving the fatigue behavior of dental implants through processing commercial purity titanium by equal-channel angular pressing Materials Science and Engineering A. 619: 312-318. DOI: 10.1016/J.Msea.2014.09.099 |
0.646 |
|
| 2014 |
Choi IC, Yoo BG, Kraft O, Schwaiger R, Seok MY, Kawasaki M, Langdon TG, Jang Ji. High-cycle fatigue behavior of Zn-22% Al alloy processed by high-pressure torsion Materials Science and Engineering A. 618: 37-40. DOI: 10.1016/J.Msea.2014.08.084 |
0.629 |
|
| 2014 |
Shirooyeh M, Xu J, Langdon TG. Microhardness evolution and mechanical characteristics of commercial purity titanium processed by high-pressure torsion Materials Science and Engineering: A. 614: 223-231. DOI: 10.1016/J.Msea.2014.07.030 |
0.582 |
|
| 2014 |
Andreau O, Gubicza J, Zhang NX, Huang Y, Jenei P, Langdon TG. Effect of short-term annealing on the microstructures and flow properties of an Al–1% Mg alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 615: 231-239. DOI: 10.1016/J.Msea.2014.07.018 |
0.598 |
|
| 2014 |
Zhao X, Yang X, Liu X, Wang CT, Huang Y, Langdon TG. Processing of commercial purity titanium by ECAP using a 90 degrees die at room temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 607: 482-489. DOI: 10.1016/J.Msea.2014.04.014 |
0.526 |
|
| 2014 |
Azzeddine H, Mehdi B, Hennet L, Thiaudière D, Alili B, Kawasaki M, Bradai D, Langdon T. An in situ synchrotron X-ray diffraction study of precipitation kinetics in a severely deformed Cu–Ni–Si alloy Materials Science and Engineering: A. 597: 288-294. DOI: 10.1016/J.Msea.2013.12.092 |
0.589 |
|
| 2014 |
Sabbaghianrad S, Langdon TG. A critical evaluation of the processing of an aluminum 7075 alloy using a combination of ECAP and HPT Materials Science and Engineering A. 596: 52-58. DOI: 10.1016/J.Msea.2013.12.034 |
0.839 |
|
| 2014 |
Pereira PHR, Figueiredo RB, Huang Y, Cetlin PR, Langdon TG. Modeling the temperature rise in high-pressure torsion Materials Science and Engineering A. 593: 185-188. DOI: 10.1016/J.Msea.2013.11.015 |
0.623 |
|
| 2014 |
Sabbaghianrad S, Wongsa-Ngam J, Kawasaki M, Langdon TG. An examination of the saturation microstructures achieved in ultrafine-grained metals processed by high-pressure torsion Journal of Materials Research and Technology. 3: 319-326. DOI: 10.1016/J.Jmrt.2014.10.002 |
0.878 |
|
| 2014 |
Marulanda Cardona DM, Wongsa-Ngam J, Langdon TG. Microstructural evolution and microhardness in a low carbon steel processed by high-pressure torsion Journal of Materials Research and Technology. 3: 344-348. DOI: 10.1016/J.Jmrt.2014.09.004 |
0.827 |
|
| 2014 |
Zhilyaev AP, Sergeev SN, Langdon TG. Electron backscatter diffraction (EBSD) microstructure evolution in HPT copper annealed at a low temperature Journal of Materials Research and Technology. 3: 338-343. DOI: 10.1016/J.Jmrt.2014.06.008 |
0.49 |
|
| 2014 |
Huang Y, Al-Zubaydi A, Kawasaki M, Langdon TG. An overview of flow patterns development on disc lower surfaces when processing by high-pressure torsion Journal of Materials Research and Technology. 3: 303-310. DOI: 10.1016/J.Jmrt.2014.06.005 |
0.543 |
|
| 2014 |
Kawasaki M, Lee H, Ahn B, Zhilyaev AP, Langdon TG. Evolution of hardness in ultrafine-grained metals processed by high-pressure torsion Journal of Materials Research and Technology. 3: 311-318. DOI: 10.1016/J.Jmrt.2014.06.002 |
0.666 |
|
| 2014 |
Alizadeh R, Mahmudi R, Langdon TG. Superplasticity of a fine-grained Mg–9Gd–4Y–0.4Zr alloy evaluated using shear punch testing Journal of Materials Research and Technology. 3: 228-232. DOI: 10.1016/J.Jmrt.2014.04.004 |
0.488 |
|
| 2014 |
Torbati-Sarraf SA, Langdon TG. Properties of a ZK60 magnesium alloy processed by high-pressure torsion Journal of Alloys and Compounds. 613: 357-363. DOI: 10.1016/J.Jallcom.2014.06.056 |
0.612 |
|
| 2014 |
Csanádi T, Chinh NQ, Gubicza J, Vörös G, Langdon TG. Characterization of stress-strain relationships in Al over a wide range of testing temperatures International Journal of Plasticity. 54: 178-192. DOI: 10.1016/J.Ijplas.2013.08.014 |
0.4 |
|
| 2014 |
Asselli AAC, Leiva DR, Huot J, Kawasaki M, Langdon TG, Botta WJ. Effects of equal-channel angular pressing and accumulative roll-bonding on hydrogen storage properties of a commercial ZK60 magnesium alloy International Journal of Hydrogen Energy. DOI: 10.1016/J.Ijhydene.2015.05.149 |
0.568 |
|
| 2014 |
Jorge AM, Lima GFd, Triques MRM, Botta WJ, Kiminami CS, Nogueira RP, Yavari AR, Langdon TG. Correlation between hydrogen storage properties and textures induced in magnesium through ECAP and cold rolling International Journal of Hydrogen Energy. 39: 3810-3821. DOI: 10.1016/J.Ijhydene.2013.12.154 |
0.425 |
|
| 2014 |
Cho TS, Lee HJ, Ahn B, Kawasaki M, Langdon TG. Microstructural evolution and mechanical properties in a Zn-Al eutectoid alloy processed by high-pressure torsion Acta Materialia. 72: 67-79. DOI: 10.1016/J.Actamat.2014.03.026 |
0.728 |
|
| 2014 |
Cao Y, Wang Y, An X, Liao X, Kawasaki M, Ringer S, Langdon T, Zhu Y. Concurrent microstructural evolution of ferrite and austenite in a duplex stainless steel processed by high-pressure torsion Acta Materialia. 63: 16-29. DOI: 10.1016/J.Actamat.2013.09.030 |
0.704 |
|
| 2014 |
Figueiredo RB, Langdon TG. Evaluating the superplastic flow of a magnesium AZ31 alloy processed by equal-channel angular pressing Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 45: 3197-3204. DOI: 10.1007/S11661-013-1920-7 |
0.765 |
|
| 2014 |
Wang L, Wang Y, Zhilyaev AP, Korznikov AV, Li S, Korznikova E, Langdon TG. Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP Journal of Materials Science. 49: 6640-6647. DOI: 10.1007/S10853-014-8306-0 |
0.507 |
|
| 2014 |
El-Danaf E, Kawasaki M, El-Rayes M, Baig M, Mohammed JA, Langdon TG. Mechanical properties and microstructure evolution in an aluminum 6082 alloy processed by high-pressure torsion Journal of Materials Science. 49: 6597-6607. DOI: 10.1007/S10853-014-8266-4 |
0.703 |
|
| 2014 |
Kawasaki M, Figueiredo RB, Huang Y, Langdon TG. Interpretation of hardness evolution in metals processed by high-pressure torsion Journal of Materials Science. 49: 6586-6596. DOI: 10.1007/S10853-014-8262-8 |
0.799 |
|
| 2014 |
Wang CT, Fox AG, Langdon TG. Microstructural evolution in ultrafine-grained titanium processed by high-pressure torsion under different pressures Journal of Materials Science. 49: 6558-6564. DOI: 10.1007/S10853-014-8248-6 |
0.483 |
|
| 2014 |
Zhilyaev AP, Langdon TG. Long-term self-annealing of copper and aluminium processed by high-pressure torsion Journal of Materials Science. 49: 6529-6535. DOI: 10.1007/S10853-014-8208-1 |
0.468 |
|
| 2014 |
Kawasaki M, Langdon TG. Review: achieving superplasticity in metals processed by high-pressure torsion Journal of Materials Science. 49: 6487-6496. DOI: 10.1007/S10853-014-8204-5 |
0.691 |
|
| 2014 |
Huang Y, Kawasaki M, Al-Zubaydi A, Langdon TG. Effect of anvil roughness on the flow patterns and hardness development in high-pressure torsion Journal of Materials Science. 49: 6517-6528. DOI: 10.1007/S10853-014-8203-6 |
0.464 |
|
| 2014 |
Huang Y, Kawasaki M, Langdon TG. An evaluation of the shearing patterns introduced by different anvil alignments in high-pressure torsion Journal of Materials Science. 49: 3146-3157. DOI: 10.1007/S10853-014-8015-8 |
0.555 |
|
| 2014 |
Nie M, Wang CT, Qu M, Gao N, Wharton JA, Langdon TG. The corrosion behaviour of commercial purity titanium processed by high-pressure torsion Journal of Materials Science. 49: 2824-2831. DOI: 10.1007/S10853-013-7988-Z |
0.531 |
|
| 2014 |
Shahmir H, Nili-Ahmadabadi M, Huang Y, Langdon TG. Evolution of microstructure and hardness in NiTi shape memory alloys processed by high-pressure torsion Journal of Materials Science. 49: 2998-3009. DOI: 10.1007/S10853-013-7985-2 |
0.554 |
|
| 2014 |
Zhilyaev AP, Shakhova I, Belyakov A, Kaibyshev R, Langdon TG. Effect of annealing on wear resistance and electroconductivity of copper processed by high-pressure torsion Journal of Materials Science. 49: 2270-2278. DOI: 10.1007/S10853-013-7923-3 |
0.464 |
|
| 2014 |
Polyakov AV, Semenova IP, Huang Y, Valiev RZ, Langdon TG. Fatigue Life and Failure Characteristics of an Ultrafine-Grained Ti–6Al–4V Alloy Processed by ECAP and Extrusion† Advanced Engineering Materials. 16: 1038-1043. DOI: 10.1002/Adem.201300530 |
0.544 |
|
| 2014 |
Yan K, Bhattacharyya D, Lian Q, Kabra S, Kawasaki M, Carr DG, Callaghan MD, Avdeev M, Li H, Wang Y, Liao X, Langdon TG, Liss KD, Dippenaar RJ. Martensitic Phase Transformation and Deformation Behavior of Fe–Mn–C–Al Twinning‐Induced Plasticity Steel during High‐Pressure Torsion Advanced Engineering Materials. 16: 927-932. DOI: 10.1002/Adem.201300488 |
0.592 |
|
| 2014 |
Shahmir H, Nili-Ahmadabadi M, Mansouri-Arani M, Khajezade A, Langdon TG. Evaluating a New Core-Sheath Procedure for Processing Hard Metals by Equal-Channel Angular Pressing† Advanced Engineering Materials. 16: 918-926. DOI: 10.1002/Adem.201300474 |
0.447 |
|
| 2014 |
Chinh NQ, Valiev RZ, Sauvage X, Varga G, Havancsák K, Kawasaki M, Straumal BB, Langdon TG. Grain Boundary Phenomena in an Ultrafine-Grained Al-Zn Alloy with Improved Mechanical Behavior for Micro-Devices Advanced Engineering Materials. 16: 1000-1009. DOI: 10.1002/Adem.201300450 |
0.682 |
|
| 2013 |
Wang CT, Gao N, Gee MG, Wood RJ, Langdon TG. Processing of an ultrafine-grained titanium by high-pressure torsion: an evaluation of the wear properties with and without a TiN coating. Journal of the Mechanical Behavior of Biomedical Materials. 17: 166-75. PMID 23140675 DOI: 10.1016/J.Jmbbm.2012.08.018 |
0.497 |
|
| 2013 |
Loucif A, Figueiredo RB, Baudin T, Brisset F, Langdon TG. Recrystallization and grain growth due to annealing of an ultrafine-grained Al alloy Materials Science Forum. 753: 303-306. DOI: 10.4028/Www.Scientific.Net/Msf.753.303 |
0.758 |
|
| 2013 |
Kawasaki M, Langdon TG. Evaluating the Flow Properties of Ultrafine-Grained Materials Advanced Materials Research. 829: 3-9. DOI: 10.4028/Www.Scientific.Net/Amr.829.3 |
0.656 |
|
| 2013 |
Zhilyaev AP, Langdon TG. Microhardness and EBSD microstructure mapping in partially-pressed al and cu through 90º ECAP die Materials Research-Ibero-American Journal of Materials. 16: 586-591. DOI: 10.1590/S1516-14392013005000037 |
0.501 |
|
| 2013 |
Figueiredo RB, Langdon TG. Heterogeneous flow during high-pressure torsion Materials Research. 16: 571-576. DOI: 10.1590/S1516-14392013005000036 |
0.648 |
|
| 2013 |
Huanga Y, Figueiredo RB, Baudin T, Helbert AL, Brisset F, Langdon TG. Microstructure and texture evolution in a magnesium alloy during processing by high-pressure torsion Materials Research. 16: 577-585. DOI: 10.1590/S1516-14392013005000025 |
0.746 |
|
| 2013 |
Kawasaki M, Langdon TG. Evaluating the flow processes in ultrafine-grained materials at elevated temperatures Materials Research. 16: 565-570. DOI: 10.1590/S1516-14392013005000023 |
0.66 |
|
| 2013 |
Polyakov AV, Semenova IP, Valiev RZ, Huang Y, Langdon TG. Influence of annealing on ductility of ultrafine-grained titanium processed by equal-channel angular pressing–Conform and drawing Mrs Communications. 3: 249-253. DOI: 10.1557/Mrc.2013.40 |
0.516 |
|
| 2013 |
Kawasaki M, Langdon TG. The many facets of deformation mechanism mapping and the application to nanostructured materials Journal of Materials Research. 28: 1827-1834. DOI: 10.1557/Jmr.2013.55 |
0.524 |
|
| 2013 |
Zhilyaev AP, Shakhova I, Belyakov A, Kaibyshev R, Langdon TG. Wear resistance and electroconductivity in copper processed by severe plastic deformation Wear. 305: 89-99. DOI: 10.1016/J.Wear.2013.06.001 |
0.48 |
|
| 2013 |
Wang CT, Escudeiro A, Polcar T, Cavaleiro A, Wood RJK, Gao N, Langdon TG. Indentation and scratch testing of DLC-Zr coatings on ultrafine-grained titanium processed by high-pressure torsion Wear. 306: 304-310. DOI: 10.1016/J.Wear.2012.12.033 |
0.468 |
|
| 2013 |
Xu X, Zhang Q, Hu N, Huang Y, Langdon TG. Using an Al–Cu binary alloy to compare processing by multi-axial compression and high-pressure torsion Materials Science and Engineering: A. 588: 280-287. DOI: 10.1016/J.Msea.2013.09.001 |
0.569 |
|
| 2013 |
Xu J, Shirooyeh M, Wongsa-Ngam J, Shan D, Guo B, Langdon TG. Hardness homogeneity and micro-tensile behavior in a magnesium AZ31 alloy processed by equal-channel angular pressing Materials Science and Engineering A. 586: 108-114. DOI: 10.1016/J.Msea.2013.07.096 |
0.851 |
|
| 2013 |
Wongsa-Ngam J, Wen H, Langdon TG. Microstructural evolution in a Cu-Zr alloy processed by a combination of ECAP and HPT Materials Science and Engineering A. 579: 126-135. DOI: 10.1016/J.Msea.2013.05.010 |
0.851 |
|
| 2013 |
Cao Y, Wang Y, Chen Z, Liao X, Kawasaki M, Ringer S, Langdon T, Zhu Y. De-twinning via secondary twinning in face-centered cubic alloys Materials Science and Engineering: A. 578: 110-114. DOI: 10.1016/J.Msea.2013.04.075 |
0.59 |
|
| 2013 |
Khereddine AY, Larbi FH, Kawasaki M, Baudin T, Bradai D, Langdon TG. An examination of microstructural evolution in a Cu–Ni–Si alloy processed by HPT and ECAP Materials Science and Engineering: A. 576: 149-155. DOI: 10.1016/J.Msea.2013.04.004 |
0.684 |
|
| 2013 |
Shahmir H, Nili-Ahmadabadi M, Mansouri-Arani M, Langdon TG. The processing of NiTi shape memory alloys by equal-channel angular pressing at room temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 576: 178-184. DOI: 10.1016/J.Msea.2013.04.001 |
0.55 |
|
| 2013 |
Alizadeh R, Mahmudi R, Langdon TG. Creep mechanisms in an Mg–4Zn alloy in the as-cast and aged conditions Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 564: 423-430. DOI: 10.1016/J.Msea.2012.11.089 |
0.394 |
|
| 2013 |
Srinivasarao B, Zhilyaev AP, Langdon TG, Pérez-Prado MT. On the relation between the microstructure and the mechanical behavior of pure Zn processed by high pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 562: 196-202. DOI: 10.1016/J.Msea.2012.11.027 |
0.576 |
|
| 2013 |
Kawasaki M, Foissey J, Langdon TG. Development of hardness homogeneity and superplastic behavior in an aluminum–copper eutectic alloy processed by high-pressure torsion Materials Science and Engineering: A. 561: 118-125. DOI: 10.1016/J.Msea.2012.10.096 |
0.708 |
|
| 2013 |
Wang YC, Langdon TG. Influence of phase volume fractions on the processing of a Ti-6Al-4V alloy by high-pressure torsion Materials Science and Engineering A. 559: 861-867. DOI: 10.1016/j.msea.2012.09.034 |
0.433 |
|
| 2013 |
Langdon TG. Achieving superplasticity in ultrafine-grained metals Mechanics of Materials. 67: 2-8. DOI: 10.1016/J.Mechmat.2013.06.005 |
0.517 |
|
| 2013 |
Huang Y, Langdon TG. Advances in ultrafine-grained materials Materials Today. 16: 85-93. DOI: 10.1016/J.Mattod.2013.03.004 |
0.54 |
|
| 2013 |
Veveçka A, Cabibbo M, Langdon TG. A characterization of microstructure and microhardness on longitudinal planes of an Al–Mg–Si alloy processed by ECAP Materials Characterization. 84: 126-133. DOI: 10.1016/J.Matchar.2013.07.016 |
0.575 |
|
| 2013 |
Fu J, Ding H, Huang Y, Zhang W, Langdon TG. Influence of phase volume fraction on the grain refining of a Ti-6Al-4V alloy by high-pressure torsion Journal of Materials Research and Technology. 4: 2-7. DOI: 10.1016/J.Jmrt.2014.10.006 |
0.534 |
|
| 2013 |
Khereddine AY, Hadj Larbi F, Azzeddine H, Baudin T, Brisset F, Helbert A, Mathon M, Kawasaki M, Bradai D, Langdon TG. Microstructures and textures of a Cu–Ni–Si alloy processed by high-pressure torsion Journal of Alloys and Compounds. 574: 361-367. DOI: 10.1016/J.Jallcom.2013.05.051 |
0.713 |
|
| 2013 |
Jorge AM, Prokofiev E, Ferreira de Lima G, Rauch E, Veron M, Botta WJ, Kawasaki M, Langdon TG. An investigation of hydrogen storage in a magnesium-based alloy processed by equal-channel angular pressing International Journal of Hydrogen Energy. 38: 8306-8312. DOI: 10.1016/J.Ijhydene.2013.03.158 |
0.648 |
|
| 2013 |
Lu CH, Remington BA, Maddox BR, Kad B, Park HS, Kawasaki M, Langdon TG, Meyers MA. Laser compression of nanocrystalline tantalum Acta Materialia. 61: 7767-7780. DOI: 10.1016/J.Actamat.2013.09.016 |
0.601 |
|
| 2013 |
Lee IF, Phan TQ, Levine LE, Tischler JZ, Geantil PT, Huang Y, Langdon TG, Kassner ME. Using X-ray microbeam diffraction to study the long-range internal stresses in aluminum processed by ECAP Acta Materialia. 61: 7741-7748. DOI: 10.1016/J.Actamat.2013.09.013 |
0.451 |
|
| 2013 |
Langdon TG. Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement Acta Materialia. 61: 7035-7059. DOI: 10.1016/J.Actamat.2013.08.018 |
0.513 |
|
| 2013 |
Hegedűs Z, Gubicza J, Szommer P, Chinh NQ, Huang Y, Langdon TG. Inhomogeneous softening during annealing of ultrafine-grained silver processed by HPT Journal of Materials Science. 48: 7384-7391. DOI: 10.1007/S10853-013-7553-9 |
0.533 |
|
| 2013 |
Zhang Y, Dong ZS, Wang JT, Liu JQ, Gao N, Langdon TG. An analytical approach and experimental confirmation of dislocation–twin boundary interactions in titanium Journal of Materials Science. 48: 4476-4483. DOI: 10.1007/S10853-013-7284-Y |
0.371 |
|
| 2013 |
Zhilyaev AP, Swaminathan S, Pshenichnyuk AI, Langdon TG, McNelley TR. Adiabatic heating and the saturation of grain refinement during SPD of metals and alloys: experimental assessment and computer modeling Journal of Materials Science. 48: 4626-4636. DOI: 10.1007/S10853-013-7254-4 |
0.567 |
|
| 2013 |
Xu J, Wang X, Zhu X, Shirooyeh M, Wongsa-Ngam J, Shan D, Guo B, Langdon TG. Dry sliding wear of an AZ31 magnesium alloy processed by equal-channel angular pressing Journal of Materials Science. 48: 4117-4127. DOI: 10.1007/S10853-013-7224-X |
0.847 |
|
| 2013 |
Al-Fadhalah KJ, Alhajeri SN, Almazrouee AI, Langdon TG. Microstructure and microtexture in pure copper processed by high-pressure torsion Journal of Materials Science. 48: 4563-4572. DOI: 10.1007/S10853-013-7200-5 |
0.562 |
|
| 2013 |
Al-Zubaydi A, Figueiredo RB, Huang Y, Langdon TG. Structural and hardness inhomogeneities in Mg-Al-Zn alloys processed by high-pressure torsion Journal of Materials Science. 48: 4661-4670. DOI: 10.1007/S10853-013-7176-1 |
0.71 |
|
| 2013 |
Zhilyaev AP, Gimazov AA, Langdon TG. Recent developments in modelling of microhardness saturation during SPD processing of metals and alloys Journal of Materials Science. 48: 4461-4466. DOI: 10.1007/S10853-013-7155-6 |
0.569 |
|
| 2013 |
Zhang GF, Sauvage X, Wang JT, Gao N, Langdon TG. Evolution of a martensitic structure in a Cu–Al alloy during processing by high-pressure torsion Journal of Materials Science. 48: 4613-4619. DOI: 10.1007/S10853-013-7153-8 |
0.555 |
|
| 2013 |
Hegedűs Z, Gubicza J, Kawasaki M, Chinh NQ, Lábár JL, Langdon TG. Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT Journal of Materials Science. 48: 4637-4645. DOI: 10.1007/S10853-012-7124-5 |
0.596 |
|
| 2013 |
Wang CT, Gao N, Gee MG, Wood RJK, Langdon TG. Tribology testing of ultrafine-grained Ti processed by high-pressure torsion with subsequent coating Journal of Materials Science. 48: 4742-4748. DOI: 10.1007/S10853-012-7110-Y |
0.47 |
|
| 2013 |
Kawasaki M, Langdon TG. The significance of grain boundary sliding in the superplastic Zn–22 % Al alloy processed by ECAP Journal of Materials Science. 48: 4730-4741. DOI: 10.1007/S10853-012-7104-9 |
0.717 |
|
| 2013 |
Wongsa-Ngam J, Kawasaki M, Langdon TG. A comparison of microstructures and mechanical properties in a Cu-Zr alloy processed using different SPD techniques Journal of Materials Science. 48: 4653-4660. DOI: 10.1007/S10853-012-7072-0 |
0.879 |
|
| 2013 |
Wang YC, Langdon TG. Effect of heat treatment on microstructure and microhardness evolution in a Ti–6Al–4V alloy processed by high-pressure torsion Journal of Materials Science. 48: 4646-4652. DOI: 10.1007/S10853-012-7071-1 |
0.527 |
|
| 2013 |
Loucif A, Baudin T, Figueiredo RB, Brisset F, Helbert AL, Chemam R, Langdon TG. Microstructure and microtexture evolution with aging treatment in an Al-Mg-Si alloy severely deformed by HPT Journal of Materials Science. 48: 4573-4581. DOI: 10.1007/S10853-012-7065-Z |
0.728 |
|
| 2013 |
Figueiredo RB, De Faria GCV, Cetlin PR, Langdon TG. Three-dimensional analysis of plastic flow during high-pressure torsion Journal of Materials Science. 48: 4524-4532. DOI: 10.1007/S10853-012-6979-9 |
0.637 |
|
| 2013 |
Patil DC, Kori SA, Venkateswarlu K, Das G, Alhajeri SN, Langdon TG. Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion Journal of Materials Science. 48: 4773-4779. DOI: 10.1007/S10853-012-6969-Y |
0.599 |
|
| 2013 |
Huang Y, Kawasaki M, Langdon TG. Influence of Anvil Alignment on Shearing Patterns in High-Pressure Torsion Advanced Engineering Materials. 15: 747-755. DOI: 10.1002/Adem.201200363 |
0.577 |
|
| 2012 |
Hegedűs Z, Gubicza J, Kawasaki M, Chinh N, Fogarassy Z, Langdon TG. The Influence of Impurity Content on Thermal Stability of Low Stacking Fault Energy Silver Processed by Severe Plastic Deformation Materials Science Forum. 729: 222-227. DOI: 10.4028/Www.Scientific.Net/Msf.729.222 |
0.623 |
|
| 2012 |
Kawasaki M, Langdon TG. Developing Hardness and Microstructural Homogeneity in High-Pressure Torsion Materials Science Forum. 1805-1810. DOI: 10.4028/Www.Scientific.Net/Msf.706-709.1805 |
0.608 |
|
| 2012 |
Loucif A, Baudin T, Brisset F, Figueiredo RB, Chemam R, Langdon TG. An investigation of microtexture evolution in an AlMgSi alloy processed by high-pressure torsion Materials Science Forum. 702: 165-168. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.165 |
0.74 |
|
| 2012 |
Kawasaki M, Langdon TG. An Investigation of Cavity Development during Superplastic Flow in a Zinc–Aluminum Alloy Processed Using Severe Plastic Deformation Materials Transactions. 53: 87-95. DOI: 10.2320/Matertrans.Md201106 |
0.601 |
|
| 2012 |
Chinh NQ, Győri T, Valiev RZ, Szommer P, Varga G, Havancsák K, Langdon TG. Observations of unique plastic behavior in micro-pillars of an ultrafine-grained alloy Mrs Communications. 2: 75-78. DOI: 10.1557/Mrc.2012.11 |
0.585 |
|
| 2012 |
Chinh NQ, Győri T, Gubicza J, Lendvai J, Langdon TG. Possible self-Organized criticality in the Portevin-Le Chatelier effect during decomposition of solid solution alloys Mrs Communications. 2: 1-4. DOI: 10.1557/Mrc.2011.25 |
0.455 |
|
| 2012 |
Csanádi T, Chinh NQ, Gubicza J, Langdon TG. Macroscopic and microscopic descriptions of the plastic deformation of Fcc metals over a wide range of strain and temperature Acta Physica Polonica A. 122: 630-633. DOI: 10.12693/Aphyspola.122.630 |
0.364 |
|
| 2012 |
Figueiredo R, Kawasaki M, Langdon T. An Evaluation of Homogeneity and Heterogeneity in Metals Processed by High-Pressure Torsion Acta Physica Polonica A. 122: 425-429. DOI: 10.12693/Aphyspola.122.425 |
0.662 |
|
| 2012 |
Cao Y, Wang YB, Liao XZ, Kawasaki M, Ringer SP, Langdon TG, Zhu YT. Applied stress controls the production of nano-twins in coarse-grained metals Applied Physics Letters. 101: 231903. DOI: 10.1063/1.4769216 |
0.644 |
|
| 2012 |
Figueiredo RB, Langdon TG. Fabricating ultrafine-grained materials through the application of severe plastic deformation: A review of developments in Brazil Journal of Materials Research and Technology. 1: 55-62. DOI: 10.1016/S2238-7854(12)70010-8 |
0.675 |
|
| 2012 |
Wang CT, Gao N, Gee MG, Wood RJK, Langdon TG. Effect of grain size on the micro-tribological behavior of pure titanium processed by high-pressure torsion Wear. 280: 28-35. DOI: 10.1016/J.Wear.2012.01.012 |
0.576 |
|
| 2012 |
Zhang P, An XH, Zhang ZJ, Wu SD, Li SX, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Optimizing strength and ductility of Cu-Zn alloys through severe plastic deformation Scripta Materialia. 67: 871-874. DOI: 10.1016/J.Scriptamat.2012.07.040 |
0.744 |
|
| 2012 |
Wang JT, Li Z, Wang J, Langdon TG. Principles of severe plastic deformation using tube high-pressure shearing Scripta Materialia. 67: 810-813. DOI: 10.1016/J.Scriptamat.2012.07.028 |
0.491 |
|
| 2012 |
Matoso MS, Figueiredo RB, Kawasaki M, Santos DB, Langdon TG. Processing a twinning-induced plasticity steel by high-pressure torsion Scripta Materialia. 67: 649-652. DOI: 10.1016/J.Scriptamat.2012.07.019 |
0.743 |
|
| 2012 |
An XH, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Enhanced strength-ductility synergy in nanostructured Cu and Cu-Al alloys processed by high-pressure torsion and subsequent annealing Scripta Materialia. 66: 227-230. DOI: 10.1016/J.Scriptamat.2011.10.043 |
0.702 |
|
| 2012 |
Sklenicka V, Dvorak J, Kral P, Svoboda M, Kvapilova M, Langdon T. Factors influencing creep flow and ductility in ultrafine-grained metals Materials Science and Engineering: A. 558: 403-411. DOI: 10.1016/J.Msea.2012.08.019 |
0.589 |
|
| 2012 |
Wongsa-Ngam J, Kawasaki M, Langdon TG. The development of hardness homogeneity in a Cu-Zr alloy processed by equal-channel angular pressing Materials Science and Engineering A. 556: 526-532. DOI: 10.1016/J.Msea.2012.07.022 |
0.85 |
|
| 2012 |
Korznikova EA, Mironov SY, Korznikov AV, Zhilyaev AP, Langdon TG. Microstructural evolution and electro-resistivity in HPT nickel Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 556: 437-445. DOI: 10.1016/J.Msea.2012.07.010 |
0.427 |
|
| 2012 |
Figueiredo RB, Langdon TG. Influence of rolling direction on flow and cavitation in a superplastic magnesium alloy processed by equal-channel angular pressing Materials Science and Engineering A. 556: 211-220. DOI: 10.1016/J.Msea.2012.06.079 |
0.724 |
|
| 2012 |
Chinh NQ, Csanádi T, Győri T, Valiev RZ, Straumal BB, Kawasaki M, Langdon TG. Strain rate sensitivity studies in an ultrafine-grained Al–30wt.% Zn alloy using micro- and nanoindentation Materials Science and Engineering: A. 543: 117-120. DOI: 10.1016/J.Msea.2012.02.056 |
0.675 |
|
| 2012 |
Pandey SC, Joseph MA, Pradeep MS, Raghavendra K, Ranganath VR, Venkateswarlu K, Langdon TG. A theoretical and experimental evaluation of repetitive corrugation and straightening: Application to Al-Cu and Al-Cu-Sc alloys Materials Science and Engineering A. 534: 282-287. DOI: 10.1016/J.Msea.2011.11.070 |
0.47 |
|
| 2012 |
Loucif A, Figueiredo RB, Baudin T, Brisset F, Chemam R, Langdon TG. Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion Materials Science and Engineering A. 532: 139-145. DOI: 10.1016/J.Msea.2011.10.074 |
0.758 |
|
| 2012 |
Hegedűs Z, Gubicza J, Kawasaki M, Chinh NQ, Fogarassy Z, Langdon TG. Microstructure of low stacking fault energy silver processed by different routes of severe plastic deformation Journal of Alloys and Compounds. 536: S190-S193. DOI: 10.1016/J.Jallcom.2011.10.070 |
0.612 |
|
| 2012 |
Figueiredo RB, Pereira PHR, Aguilar MTP, Cetlin PR, Langdon TG. Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion Acta Materialia. 60: 3190-3198. DOI: 10.1016/J.Actamat.2012.02.027 |
0.662 |
|
| 2012 |
Ni S, Wang YB, Liao XZ, Figueiredo RB, Li HQ, Ringer SP, Langdon TG, Zhu YT. The effect of dislocation density on the interactions between dislocations and twin boundaries in nanocrystalline materials Acta Materialia. 60: 3181-3189. DOI: 10.1016/J.Actamat.2012.02.026 |
0.61 |
|
| 2012 |
Tian Y, Li J, Zhang P, Wu S, Zhang Z, Kawasaki M, Langdon T. Microstructures, strengthening mechanisms and fracture behavior of Cu–Ag alloys processed by high-pressure torsion Acta Materialia. 60: 269-281. DOI: 10.1016/J.Actamat.2011.09.058 |
0.619 |
|
| 2012 |
Wang Y, Qu D, Wang X, Cao Y, Liao X, Kawasaki M, Ringer S, Shan Z, Langdon T, Shen J. Introducing a strain-hardening capability to improve the ductility of bulk metallic glasses via severe plastic deformation Acta Materialia. 60: 253-260. DOI: 10.1016/J.Actamat.2011.09.026 |
0.611 |
|
| 2012 |
Valiev RZ, Sabirov I, Zhilyaev AP, Langdon TG. Bulk Nanostructured Metals for Innovative Applications Jom. 64: 1134-1142. DOI: 10.1007/S11837-012-0427-9 |
0.369 |
|
| 2012 |
Tian YZ, Zhang ZF, Langdon TG. Achieving homogeneity in a two-phase Cu–Ag composite during high-pressure torsion Journal of Materials Science. 48: 4606-4612. DOI: 10.1007/S10853-012-7105-8 |
0.538 |
|
| 2012 |
Zhang NX, Kawasaki M, Huang Y, Langdon TG. Microstructural evolution in two-phase alloys processed by high-pressure torsion Journal of Materials Science. 48: 4582-4591. DOI: 10.1007/S10853-012-7087-6 |
0.708 |
|
| 2012 |
Mungole T, Nadammal N, Dawra K, Kumar P, Kawasaki M, Langdon TG. Evolution of microhardness and microstructure in a cast Al–7 % Si alloy during high-pressure torsion Journal of Materials Science. 48: 4671-4680. DOI: 10.1007/S10853-012-7061-3 |
0.699 |
|
| 2012 |
Huang Y, Kawasaki M, Langdon TG. An investigation of flow patterns and hardness distributions using different anvil alignments in high-pressure torsion Journal of Materials Science. 48: 4533-4542. DOI: 10.1007/S10853-012-7015-9 |
0.569 |
|
| 2012 |
Hegedűs Z, Gubicza J, Kawasaki M, Chinh NQ, Süvegh K, Fogarassy Z, Langdon TG. High temperature thermal stability of ultrafine-grained silver processed by equal-channel angular pressing Journal of Materials Science. 48: 1675-1684. DOI: 10.1007/S10853-012-6926-9 |
0.608 |
|
| 2012 |
Sordi VL, Ferrante M, Kawasaki M, Langdon TG. Microstructure and tensile strength of grade 2 titanium processed by equal-channel angular pressing and by rolling Journal of Materials Science. 47: 7870-7876. DOI: 10.1007/S10853-012-6593-X |
0.685 |
|
| 2012 |
Wongsa-Ngam J, Kawasaki M, Langdon TG. Achieving homogeneity in a Cu-Zr alloy processed by high-pressure torsion Journal of Materials Science. 47: 7782-7788. DOI: 10.1007/S10853-012-6587-8 |
0.87 |
|
| 2012 |
Huang Y, Figueiredo RB, Baudin T, Helbert AL, Brisset F, Langdon TG. Effect of temperature on the processing of a magnesium alloy by high-pressure torsion Journal of Materials Science. 47: 7796-7806. DOI: 10.1007/S10853-012-6578-9 |
0.748 |
|
| 2012 |
Sabbaghianrad S, Kawasaki M, Langdon TG. Microstructural evolution and the mechanical properties of an aluminum alloy processed by high-pressure torsion Journal of Materials Science. 47: 7789-7795. DOI: 10.1007/S10853-012-6524-X |
0.859 |
|
| 2012 |
Kawasaki M, Figueiredo RB, Langdon TG. Twenty-five years of severe plastic deformation: Recent developments in evaluating the degree of homogeneity through the thickness of disks processed by high-pressure torsion Journal of Materials Science. 47: 7719-7725. DOI: 10.1007/S10853-012-6507-Y |
0.748 |
|
| 2012 |
Figueiredo RB, Aguilar MTP, Cetlin PR, Langdon TG. Analysis of plastic flow during high-pressure torsion Journal of Materials Science. 47: 7807-7814. DOI: 10.1007/S10853-012-6506-Z |
0.648 |
|
| 2012 |
Kawasaki M, Langdon TG. Using deformation mechanism maps to depict flow processes in superplastic ultrafine-grained materials Journal of Materials Science. 47: 7726-7734. DOI: 10.1007/S10853-012-6487-Y |
0.61 |
|
| 2012 |
Zhilyaev AP, Langdon TG. Microstructure and microtexture evolution in pure metals after ultra-high straining Journal of Materials Science. 47: 7888-7893. DOI: 10.1007/S10853-012-6429-8 |
0.513 |
|
| 2012 |
Loucif A, Figueiredo RB, Kawasaki M, Baudin T, Brisset F, Chemam R, Langdon TG. Effect of aging on microstructural development in an Al-Mg-Si alloy processed by high-pressure torsion Journal of Materials Science. 47: 7815-7820. DOI: 10.1007/S10853-012-6400-8 |
0.793 |
|
| 2012 |
Chen Y, Li Y, Walmsley J, Gao N, Roven HJ, Starink M, Langdon T. Microstructural heterogeneity in hexagonal close-packed pure Ti processed by high-pressure torsion Journal of Materials Science. 47: 4838-4844. DOI: 10.1007/S10853-012-6343-0 |
0.595 |
|
| 2012 |
Gao N, Wang CT, Wood RJK, Langdon TG. Tribological properties of ultrafine-grained materials processed by severe plastic deformation Journal of Materials Science. 47: 4779-4797. DOI: 10.1007/S10853-011-6231-Z |
0.531 |
|
| 2012 |
Huang Y, Figueiredo RB, Baudin T, Brisset F, Langdon TG. Evolution of strength and homogeneity in a magnesium AZ31 alloy processed by high-pressure torsion at different temperatures Advanced Engineering Materials. 14: 1018-1026. DOI: 10.1002/Adem.201200016 |
0.768 |
|
| 2012 |
Wen H, Zhao Y, Topping TD, Ashford D, Figueiredo RB, Xu C, Langdon TG, Lavernia EJ. Influence of pressing temperature on microstructure evolution and mechanical behavior of ultrafine-grained cu processed by equal-channel angular pressing Advanced Engineering Materials. 14: 185-194. DOI: 10.1002/Adem.201100080 |
0.735 |
|
| 2011 |
Sha G, Yao L, Liao X, Ringer SP, Chao Duan Z, Langdon TG. Segregation of solute elements at grain boundaries in an ultrafine grained Al-Zn-Mg-Cu alloy. Ultramicroscopy. 111: 500-5. PMID 21159437 DOI: 10.1016/J.Ultramic.2010.11.013 |
0.527 |
|
| 2011 |
Kawasaki M, Sklenička V, Langdon TG. Creep behavior of metals processed by equal-channel angular pressing Kovove Materialy-Metallic Materials. 49. DOI: 10.4149/Km-2011-1-75 |
0.696 |
|
| 2011 |
Langdon TG. Processing by severe plastic deformation: Historical developments and current impact Materials Science Forum. 667: 9-14. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.9 |
0.413 |
|
| 2011 |
Venkateswarlu K, Rajinikanth V, Sen MK, Alhajeri SN, Langdon TG. Application of high-pressure torsion to Al-Si alloys with and without scandium additions Materials Science Forum. 667: 743-748. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.743 |
0.526 |
|
| 2011 |
Zhang Y, Alhajeri SN, Figueiredo RB, Gao N, Wang JT, Langdon TG. Contribution of twins to the strengthening of commercial purity titanium after equal-channel angular pressing Materials Science Forum. 667: 719-724. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.719 |
0.741 |
|
| 2011 |
Bai J, Xue F, Alhajeri SN, Langdon TG. Microstructural evolution of Mg-4Nd alloy processed by high-pressure torsion Materials Science Forum. 667: 391-396. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.391 |
0.602 |
|
| 2011 |
Alhajeri SN, Kawasaki M, Gao N, Langdon TG. The evolution of homogeneity during processing of aluminium alloys by HPT Materials Science Forum. 667: 277-282. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.277 |
0.651 |
|
| 2011 |
Figueiredo RB, Langdon TG. Structural evolution on the cross-section of an AZ31 magnesium alloy processed by High-Pressure Torsion Materials Science Forum. 667: 247-252. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.247 |
0.719 |
|
| 2011 |
Loucif A, Figueiredo RB, Baudin T, Brisset F, Langdon TG. Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion and rapid annealing Materials Science Forum. 667: 223-228. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.223 |
0.788 |
|
| 2011 |
Ni S, Wang YB, Liao XZ, Alhajeri SN, Li HQ, Ringer SP, Langdon TG, Zhu YT. Grain size effect on deformation twinning and de-twinning in a nanocrystalline Ni-Fe alloy Materials Science Forum. 667: 181-186. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.181 |
0.553 |
|
| 2011 |
Gubicza J, Chinh NQ, Dobatkin SV, Khosravi E, Langdon TG. Stability of ultrafine-grained microstructure in fcc metals processed by severe plastic deformation Key Engineering Materials. 465: 195-198. DOI: 10.4028/Www.Scientific.Net/Kem.465.195 |
0.487 |
|
| 2011 |
Ni S, Wang YB, Liao XZ, Li HQ, Figueiredo RB, Ringer SP, Langdon TG, Zhu YT. Effect of grain size on the competition between twinning and detwinning in nanocrystalline metals Physical Review B - Condensed Matter and Materials Physics. 84. DOI: 10.1103/Physrevb.84.235401 |
0.71 |
|
| 2011 |
An XH, Lin QY, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Significance of stacking fault energy on microstructural evolution in Cu and Cu-Al alloys processed by high-pressure torsion Philosophical Magazine. 91: 3307-3326. DOI: 10.1080/14786435.2011.577757 |
0.714 |
|
| 2011 |
Tian YZ, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Strain hardening behavior of a two-phase Cu-Ag alloy processed by high-pressure torsion Scripta Materialia. 65: 477-480. DOI: 10.1016/J.Scriptamat.2011.06.004 |
0.684 |
|
| 2011 |
Chowdhury SG, Gubicza J, Mahato B, Chinh NQ, Hegedűs Z, Langdon TG. Texture evolution during room temperature ageing of silver processed by equal-channel angular pressing Scripta Materialia. 64: 1007-1010. DOI: 10.1016/J.Scriptamat.2011.02.005 |
0.401 |
|
| 2011 |
An XH, Lin QY, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. The influence of stacking fault energy on the mechanical properties of nanostructured Cu and Cu-Al alloys processed by high-pressure torsion Scripta Materialia. 64: 954-957. DOI: 10.1016/J.Scriptamat.2011.01.041 |
0.689 |
|
| 2011 |
Ni S, Wang YB, Liao XZ, Alhajeri SN, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Langdon TG, Zhu YT. Grain growth and dislocation density evolution in a nanocrystalline Ni-Fe alloy induced by high-pressure torsion Scripta Materialia. 64: 327-330. DOI: 10.1016/J.Scriptamat.2010.10.027 |
0.561 |
|
| 2011 |
An XH, Lin QY, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Formation of fivefold deformation twins in an ultrafine-grained copper alloy processed by high-pressure torsion Scripta Materialia. 64: 249-252. DOI: 10.1016/J.Scriptamat.2010.10.012 |
0.733 |
|
| 2011 |
Kawasaki M, Alhajeri SN, Xu C, Langdon TG. The development of hardness homogeneity in pure aluminum and aluminum alloy disks processed by high-pressure torsion Materials Science and Engineering A. 529: 345-351. DOI: 10.1016/J.Msea.2011.09.039 |
0.714 |
|
| 2011 |
Hegedűs Z, Gubicza J, Kawasaki M, Chinh NQ, Fogarassy Z, Langdon TG. The effect of impurity level on ultrafine-grained microstructures and their stability in low stacking fault energy silver Materials Science and Engineering: A. 528: 8694-8699. DOI: 10.1016/J.Msea.2011.08.034 |
0.62 |
|
| 2011 |
Figueiredo RB, Cetlin PR, Langdon TG. Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion Materials Science and Engineering A. 528: 8198-8204. DOI: 10.1016/J.Msea.2011.07.040 |
0.604 |
|
| 2011 |
Ni S, Sha G, Wang YB, Liao XZ, Alhajeri SN, Li HQ, Zhu YT, Langdon TG, Ringer SP. Elemental redistribution in a nanocrystalline Ni-Fe alloy induced by high-pressure torsion Materials Science and Engineering A. 528: 7500-7505. DOI: 10.1016/J.Msea.2011.06.057 |
0.531 |
|
| 2011 |
Wongsa-Ngam J, Kawasaki M, Zhao Y, Langdon TG. Microstructural evolution and mechanical properties of a Cu-Zr alloy processed by high-pressure torsion Materials Science and Engineering A. 528: 7715-7722. DOI: 10.1016/J.Msea.2011.06.056 |
0.872 |
|
| 2011 |
Zhang Y, Figueiredo RB, Alhajeri SN, Wang JT, Gao N, Langdon TG. Structure and mechanical properties of commercial purity titanium processed by ECAP at room temperature Materials Science and Engineering A. 528: 7708-7714. DOI: 10.1016/J.Msea.2011.06.054 |
0.692 |
|
| 2011 |
Kawasaki M, Balasubramanian N, Langdon TG. Flow mechanisms in ultrafine-grained metals with an emphasis on superplasticity Materials Science and Engineering A. 528: 6624-6629. DOI: 10.1016/J.Msea.2011.05.005 |
0.641 |
|
| 2011 |
Kawasaki M, Langdon TG. Developing superplasticity and a deformation mechanism map for the Zn-Al eutectoid alloy processed by high-pressure torsion Materials Science and Engineering A. 528: 6140-6145. DOI: 10.1016/J.Msea.2011.04.053 |
0.698 |
|
| 2011 |
Xu C, Horita Z, Langdon TG. Microstructural evolution in an aluminum solid solution alloy processed by ECAP Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 6059-6065. DOI: 10.1016/J.Msea.2011.04.017 |
0.656 |
|
| 2011 |
Ni S, Wang YB, Liao XZ, Figueiredo RB, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Langdon TG, Zhu YT. Strain softening in nanocrystalline Ni-Fe alloy induced by large HPT revolutions Materials Science and Engineering A. 528: 4807-4811. DOI: 10.1016/J.Msea.2011.03.007 |
0.723 |
|
| 2011 |
Figueiredo RB, Langdon TG. Development of structural heterogeneities in a magnesium alloy processed by high-pressure torsion Materials Science and Engineering A. 528: 4500-4506. DOI: 10.1016/J.Msea.2011.02.048 |
0.762 |
|
| 2011 |
Duan ZC, Langdon TG. An experimental evaluation of a special ECAP die containing two equal arcs of curvature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 528: 4173-4179. DOI: 10.1016/J.Msea.2011.02.003 |
0.374 |
|
| 2011 |
Alhajeri SN, Gao N, Langdon TG. Hardness homogeneity on longitudinal and transverse sections of an aluminum alloy processed by ECAP Materials Science and Engineering A. 528: 3833-3840. DOI: 10.1016/J.Msea.2011.01.074 |
0.423 |
|
| 2011 |
Serre P, Figueiredo RB, Gao N, Langdon TG. Influence of strain rate on the characteristics of a magnesium alloy processed by high-pressure torsion Materials Science and Engineering A. 528: 3601-3608. DOI: 10.1016/J.Msea.2011.01.066 |
0.737 |
|
| 2011 |
Tian YZ, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Comparison of microstructures and mechanical properties of a Cu-Ag alloy processed using different severe plastic deformation modes Materials Science and Engineering A. 528: 4331-4336. DOI: 10.1016/J.Msea.2011.01.057 |
0.731 |
|
| 2011 |
Ni S, Wang YB, Liao XZ, Alhajeri SN, Li HQ, Zhao YH, Lavernia EJ, Ringer SP, Langdon TG, Zhu YT. Strain hardening and softening in a nanocrystalline Ni-Fe alloy induced by severe plastic deformation Materials Science and Engineering A. 528: 3398-3403. DOI: 10.1016/J.Msea.2011.01.017 |
0.492 |
|
| 2011 |
Rajinikanth V, Venkateswarlu K, Sen MK, Das M, Alhajeri SN, Langdon TG. Influence of scandium on an Al-2% Si alloy processed by high-pressure torsion Materials Science and Engineering A. 528: 1702-1706. DOI: 10.1016/J.Msea.2010.10.102 |
0.524 |
|
| 2011 |
Alhajeri SN, Fox AG, Langdon TG. A convergent-beam electron diffraction study of strain homogeneity in severely strained aluminum processed by equal-channel angular pressing Acta Materialia. 59: 7388-7395. DOI: 10.1016/J.Actamat.2011.08.018 |
0.504 |
|
| 2011 |
Cao Y, Wang YB, Figueiredo RB, Chang L, Liao XZ, Kawasaki M, Zheng WL, Ringer SP, Langdon TG, Zhu YT. Three-dimensional shear-strain patterns induced by high-pressure torsion and their impact on hardness evolution Acta Materialia. 59: 3903-3914. DOI: 10.1016/J.Actamat.2011.03.015 |
0.705 |
|
| 2011 |
Tian YZ, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Microstructural evolution and mechanical properties of a two-phase Cu-Ag alloy processed by high-pressure torsion to ultrahigh strains Acta Materialia. 59: 2783-2796. DOI: 10.1016/J.Actamat.2011.01.017 |
0.693 |
|
| 2011 |
Csanádi T, Chinh NQ, Gubicza J, Langdon TG. Plastic behavior of fcc metals over a wide range of strain: Macroscopic and microscopic descriptions and their relationship Acta Materialia. 59: 2385-2391. DOI: 10.1016/J.Actamat.2010.12.034 |
0.418 |
|
| 2011 |
Kawasaki M, Figueiredo RB, Langdon TG. An investigation of hardness homogeneity throughout disks processed by high-pressure torsion Acta Materialia. 59: 308-316. DOI: 10.1016/J.Actamat.2010.09.034 |
0.727 |
|
| 2011 |
Figueiredo RB, Aguilar MTP, Cetlin PR, Langdon TG. Deformation heterogeneity on the cross-sectional planes of a magnesium alloy processed by high-pressure torsion Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 42: 3013-3021. DOI: 10.1007/S11661-011-0609-Z |
0.734 |
|
| 2011 |
Valiev RZ, Langdon TG. Achieving Exceptional Grain Refinement through Severe Plastic Deformation: New Approaches for Improving the Processing Technology Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 42: 2942-2951. DOI: 10.1007/S11661-010-0556-0 |
0.495 |
|
| 2011 |
Wang CT, Gao N, Wood RJK, Langdon TG. Wear behavior of an aluminum alloy processed by equal-channel angular pressing Journal of Materials Science. 46: 123-130. DOI: 10.1007/S10853-010-4862-0 |
0.527 |
|
| 2011 |
Xu W, Figueiredo RB, Wu X, Pauly S, Stoica M, Eckert J, Langdon TG, Xia K. Intrinsically ductile failure in a nanocrystalline beta titanium alloy Advanced Engineering Materials. 13: 1108-1113. DOI: 10.1002/Adem.201100116 |
0.7 |
|
| 2010 |
Sklenička V, Král P, Dvořák J, Kvapilová M, Kawasaki M, Langdon TG. Effect of Equal-Channel Angular Pressing on the Creep Resistance of Precipitation-Strengthened Alloys Materials Science Forum. 897-902. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.897 |
0.644 |
|
| 2010 |
Huang Y, Langdon TG. Using Atomic Force Microscopy to Examine Flow Processes in Materials Processed by ECAP Materials Science Forum. 773-778. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.773 |
0.473 |
|
| 2010 |
Kumar P, Langdon TG. Mechanical Characteristics of Zn-22% Al and Al-3% Mg Alloys Processed to High Strains by ECAP Materials Science Forum. 695-700. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.695 |
0.525 |
|
| 2010 |
Duan ZC, Langdon TG. Effect of a Special ECAP Die Configuration on Microhardness Distributions in Pure Aluminum Materials Science Forum. 69-74. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.69 |
0.319 |
|
| 2010 |
Xu C, Horita Z, Langdon TG. Mechanical properties of Al-6061 and an Al-6061 metal matrix composite processed by high-pressure torsion Materials Science Forum. 689-694. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.689 |
0.618 |
|
| 2010 |
Chinh NQ, Csanádi T, Gubicza J, Valiev RZ, Straumal BB, Langdon TG. The effect of grain boundary sliding and strain rate sensitivity on the ductility of ultrafine-grained materials Materials Science Forum. 677-682. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.677 |
0.578 |
|
| 2010 |
Zhang GF, Sauvage X, Wang JT, Gao N, Langdon TG. Decomposition of Nanostructured Martensite in Cu-Al Alloys Processed by High-Pressure Torsion Materials Science Forum. 469-474. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.469 |
0.503 |
|
| 2010 |
Kawasaki M, Langdon TG. Developing the Technique of Severe Plastic Deformation Processing through High-Pressure Torsion Materials Science Forum. 397-402. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.397 |
0.703 |
|
| 2010 |
Wang CT, Gao N, Wood RJK, Langdon TG. Wear Behaviour of Al-1050 Alloy Processed by Severe Plastic Deformation Materials Science Forum. 1101-1106. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.1101 |
0.488 |
|
| 2010 |
Gao N, Wang CT, Wood RJK, Langdon TG. Wear resistance of SPD-processed alloys Materials Science Forum. 1095-1100. DOI: 10.4028/Www.Scientific.Net/Msf.667-669.1095 |
0.49 |
|
| 2010 |
Gubicza J, Chinh NQ, Lábár JL, Hegedűs Z, Langdon TG. Unique Features of Ultrafine-Grained Microstructures in Materials Having Low Stacking Fault Energy Materials Science Forum. 659: 171-176. DOI: 10.4028/Www.Scientific.Net/Msf.659.171 |
0.478 |
|
| 2010 |
Kawasaki M, Langdon TG. Characteristics of High Temperature Creep in Pure Aluminum Processed by Equal-Channel Angular Pressing Materials Science Forum. 1965-1970. DOI: 10.4028/Www.Scientific.Net/Msf.638-642.1965 |
0.638 |
|
| 2010 |
Furukawa M, Horita Z, Langdon TG. Microstructures of Aluminum and Copper Single Crystals Processed by Equal-Channel Angular Pressing Materials Science Forum. 1946-1951. DOI: 10.4028/Www.Scientific.Net/Msf.638-642.1946 |
0.407 |
|
| 2010 |
Figueiredo RB, Duan Z, Kawasaki M, Langdon TG. Factors influencing ductility in ultrafine-grained metals processed by equal-channel angular pressing Materials Science Forum. 633: 341-352. DOI: 10.4028/Www.Scientific.Net/Msf.633-634.341 |
0.772 |
|
| 2010 |
Xu C, Horita Z, Langdon TG. Microstructural evolution in pure aluminum in the early stages of processing by high-pressure torsion Materials Transactions. 51: 2-7. DOI: 10.2320/Matertrans.Mb200910 |
0.538 |
|
| 2010 |
Zhu YT, Valiev RZ, Langdon TG, Tsuji N, Lu K. Processing of nanostructured metals and alloys via plastic deformation Mrs Bulletin. 35: 977-981. DOI: 10.1557/Mrs2010.702 |
0.495 |
|
| 2010 |
Kawasaki M, Langdon TG. New developments in the processing of bulk nanoscale metals using high-pressure torsion Nanoscience and Nanotechnology Letters. 2: 303-307. DOI: 10.1166/Nnl.2010.1098 |
0.698 |
|
| 2010 |
Gubicza J, Chinh NQ, Langdon TG. Monitoring of self-annealing in ultrafine-grained silver using nanoindentation Nanoscience and Nanotechnology Letters. 2: 294-297. DOI: 10.1166/Nnl.2010.1096 |
0.425 |
|
| 2010 |
An XH, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Evolution of microstructural homogeneity in copper processed by high-pressure torsion Scripta Materialia. 63: 560-563. DOI: 10.1016/J.Scriptamat.2010.05.030 |
0.722 |
|
| 2010 |
Figueiredo RB, Száraz Z, Trojanová Z, Lukáč P, Langdon TG. Significance of twinning in the anisotropic behavior of a magnesium alloy processed by equal-channel angular pressing Scripta Materialia. 63: 504-507. DOI: 10.1016/J.Scriptamat.2010.05.016 |
0.722 |
|
| 2010 |
Tian YZ, An XH, Wu SD, Zhang ZF, Figueiredo RB, Gao N, Langdon TG. Direct observations of microstructural evolution in a two-phase Cu-Ag alloy processed by high-pressure torsion Scripta Materialia. 63: 65-68. DOI: 10.1016/J.Scriptamat.2010.03.014 |
0.732 |
|
| 2010 |
Balogh L, Figueiredo RB, Ungár T, Langdon TG. The contributions of grain size, dislocation density and twinning to the strength of a magnesium alloy processed by ECAP Materials Science and Engineering A. 528: 533-538. DOI: 10.1016/J.Msea.2010.09.048 |
0.721 |
|
| 2010 |
Kawasaki M, Ahn B, Langdon TG. Significance of strain reversals in a two-phase alloy processed by high-pressure torsion Materials Science and Engineering: A. 527: 7008-7016. DOI: 10.1016/J.Msea.2010.07.090 |
0.694 |
|
| 2010 |
Zhao X, Yang X, Liu X, Wang X, Langdon TG. The processing of pure titanium through multiple passes of ECAP at room temperature Materials Science and Engineering: A. 527: 6335-6339. DOI: 10.1016/J.Msea.2010.06.049 |
0.487 |
|
| 2010 |
Sha G, Wang YB, Liao XZ, Duan ZC, Ringer SP, Langdon TG. Microstructural evolution of Fe-rich particles in an Al-Zn-Mg-Cu Alloy during equal-channel angular pressing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 4742-4749. DOI: 10.1016/J.Msea.2010.04.041 |
0.4 |
|
| 2010 |
Wang YB, Liao XZ, Zhao YH, Lavernia EJ, Ringer SP, Horita Z, Langdon TG, Zhu YT. The role of stacking faults and twin boundaries in grain refinement of a Cu-Zn alloy processed by high-pressure torsion Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 4959-4966. DOI: 10.1016/J.Msea.2010.04.036 |
0.532 |
|
| 2010 |
Loucif A, Figueiredo RB, Baudin T, Brisset F, Langdon TG. Microstructural evolution in an Al-6061 alloy processed by high-pressure torsion Materials Science and Engineering A. 527: 4864-4869. DOI: 10.1016/J.Msea.2010.04.027 |
0.767 |
|
| 2010 |
Li Y, Zhao YH, Liu W, Xu C, Horita Z, Liao XZ, Zhu YT, Langdon TG, Lavernia EJ. Influence of grain size on the density of deformation twins in Cu–30%Zn alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 3942-3948. DOI: 10.1016/J.Msea.2010.02.076 |
0.608 |
|
| 2010 |
Figueiredo RB, Beyerlein IJ, Zhilyaev AP, Langdon TG. Evolution of texture in a magnesium alloy processed by ECAP through dies with different angles Materials Science and Engineering A. 527: 1709-1718. DOI: 10.1016/J.Msea.2009.10.061 |
0.706 |
|
| 2010 |
Venkateswarlu K, Rajinikanth V, Ray AK, Xu C, Langdon TG. The characteristics of aluminum–scandium alloys processed by ECAP Materials Science and Engineering: A. 527: 1448-1452. DOI: 10.1016/J.Msea.2009.10.047 |
0.657 |
|
| 2010 |
Gubicza J, Chinh NQ, Labar JL, Hegedus Z, Langdon TG. Principles of self-annealing in silver processed by equal-channel angular pressing: the significance of a very low stacking fault energy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 752-760. DOI: 10.1016/J.Msea.2009.08.071 |
0.408 |
|
| 2010 |
Figueiredo RB, Terzi S, Langdon TG. Using X-ray microtomography to evaluate cavity formation in a superplastic magnesium alloy processed by equal-channel angular pressing Acta Materialia. 58: 5737-5748. DOI: 10.1016/J.Actamat.2010.06.049 |
0.712 |
|
| 2010 |
Chinh NQ, Csanádi T, Gubicza J, Langdon TG. Plastic behavior of face-centered-cubic metals over a wide range of strain Acta Materialia. 58: 5015-5021. DOI: 10.1016/J.Actamat.2010.05.036 |
0.465 |
|
| 2010 |
Xu C, Schroeder S, Berbon PB, Langdon TG. Principles of ECAP–Conform as a continuous process for achieving grain refinement: Application to an aluminum alloy Acta Materialia. 58: 1379-1386. DOI: 10.1016/J.Actamat.2009.10.044 |
0.674 |
|
| 2010 |
Kawasaki M, Ahn B, Langdon TG. Microstructural evolution in a two-phase alloy processed by high-pressure torsion Acta Materialia. 58: 919-930. DOI: 10.1016/J.Actamat.2009.10.007 |
0.715 |
|
| 2010 |
Figueiredo RB, Cetlin PR, Langdon TG. Stable and unstable flow in materials processed by equal-channel angular pressing with an emphasis on magnesium alloys Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 778-786. DOI: 10.1007/S11661-009-0100-2 |
0.676 |
|
| 2010 |
Duan ZC, Chinh NQ, Xu C, Langdon TG. developing processing routes for the equal-channel angular pressing of age-hardenable aluminum alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 41: 802-809. DOI: 10.1007/S11661-009-0020-1 |
0.609 |
|
| 2010 |
Kawasaki M, de A. Mendes A, Sordi VL, Ferrante M, Langdon TG. Achieving superplastic properties in a Pb–Sn eutectic alloy processed by equal-channel angular pressing Journal of Materials Science. 46: 155-160. DOI: 10.1007/S10853-010-4889-2 |
0.698 |
|
| 2010 |
Figueiredo RB, Langdon TG. Grain refinement and mechanical behavior of a magnesium alloy processed by ECAP Journal of Materials Science. 45: 4827-4836. DOI: 10.1007/S10853-010-4589-Y |
0.749 |
|
| 2010 |
Valiev RZ, Murashkin MY, Kilmametov A, Straumal B, Chinh NQ, Langdon TG. Unusual super-ductility at room temperature in an ultrafine-grained aluminum alloy Journal of Materials Science. 45: 4718-4724. DOI: 10.1007/S10853-010-4588-Z |
0.607 |
|
| 2010 |
Cao Y, Kawasaki M, Wang YB, Alhajeri SN, Liao XZ, Zheng WL, Ringer SP, Zhu YT, Langdon TG. Unusual macroscopic shearing patterns observed in metals processed by high-pressure torsion Journal of Materials Science. 45: 4545-4553. DOI: 10.1007/S10853-010-4485-5 |
0.595 |
|
| 2010 |
Kawasaki M, Ahn B, Langdon TG. Effect of strain reversals on the processing of high-purity aluminum by high-pressure torsion Journal of Materials Science. 45: 4583-4593. DOI: 10.1007/S10853-010-4420-9 |
0.599 |
|
| 2010 |
Duan ZC, Liao XZ, Kawasaki M, Figueiredo RB, Langdon TG. Influence of high-pressure torsion on microstructural evolution in an Al-Zn-Mg-Cu alloy Journal of Materials Science. 45: 4621-4630. DOI: 10.1007/S10853-010-4400-0 |
0.805 |
|
| 2010 |
Cetlin PR, Aguilar MTP, Figueiredo RB, Langdon TG. Avoiding cracks and inhomogeneities in billets processed by ECAP Journal of Materials Science. 45: 4561-4570. DOI: 10.1007/S10853-010-4384-9 |
0.671 |
|
| 2010 |
Cao Y, Wang YB, Alhajeri SN, Liao XZ, Zheng WL, Ringer SP, Langdon TG, Zhu YT. A visualization of shear strain in processing by high-pressure torsion Journal of Materials Science. 45: 765-770. DOI: 10.1007/S10853-009-3998-2 |
0.406 |
|
| 2010 |
Kawasaki M, Sklenička V, Langdon TG. An evaluation of creep behavior in ultrafine-grained aluminum alloys processed by ECAP Journal of Materials Science. 45: 271-274. DOI: 10.1007/S10853-009-3975-9 |
0.67 |
|
| 2010 |
Valiev RZ, Langdon TG. The Art and Science of Tailoring Materials by Nanostructuring for Advanced Properties Using SPD Techniques Advanced Engineering Materials. 12: 677-691. DOI: 10.1002/Adem.201000019 |
0.395 |
|
| 2009 |
Chinh NQ, Gubicza J, Czeppe T, Lendvai J, Langdon TG. Processing Age-Hardenable Alloys by Equal-Channel Angular Pressing at Room Temperature: Strategies and Advantages Materials Science Forum. 527-534. DOI: 10.4028/Www.Scientific.Net/Msf.633-634.527 |
0.513 |
|
| 2009 |
Valiev RZ, Xia K, Langdon TG. Processing by severe plastic deformation: an ancient skill adapted for the modern world. International Journal of Materials Research. 100: 1623-1631. DOI: 10.3139/146.110233 |
0.476 |
|
| 2009 |
Xu W, Wu X, Figueiredo RB, Stoica M, Calin M, Eckert J, Langdon TG, Xia K. Nanocrystalline body-centred cubic beta-titanium alloy processed by high-pressure torsion International Journal of Materials Research. 100: 1662-1667. DOI: 10.3139/146.110229 |
0.711 |
|
| 2009 |
Figueiredo RB, Langdon TG. The nature of grain refinement in equal-channel angular pressing: A comparison of representative fee and hep metals International Journal of Materials Research. 100: 1638-1646. DOI: 10.3139/146.110228 |
0.72 |
|
| 2009 |
Sha G, Ringer SP, Duan ZC, Langdon TG. An atom probe characterisation of grain boundaries in an aluminium alloy processed by equal-channel angular pressing International Journal of Materials Research. 100: 1674-1678. DOI: 10.3139/146.110227 |
0.527 |
|
| 2009 |
Gubicza J, Chinh NQ, Lábár JL, Tichy G, Hegedüs Z, Xu C, Langdon TG. Stability of microstructure in silver processed by severe plastic deformation International Journal of Materials Research. 100: 884-887. DOI: 10.3139/146.110113 |
0.582 |
|
| 2009 |
Figueiredo RB, Langdon TG. The characteristics of superplastic flow in a magnesium alloy processed by ECAP International Journal of Materials Research. 100: 843-846. DOI: 10.3139/146.110102 |
0.763 |
|
| 2009 |
Xu C, Kawasaki M, Langdon TG. The high-temperature creep properties of materials processed using severe plastic deformation International Journal of Materials Research. 100: 750-756. DOI: 10.3139/146.110093 |
0.748 |
|
| 2009 |
Figueiredo RB, Langdon TG. Using severe plastic deformation for the processing of advanced engineering materials Materials Transactions. 50: 1613-1619. DOI: 10.2320/Matertrans.Mf200913 |
0.739 |
|
| 2009 |
Figueiredo RB, Langdon TG. Achieving microstructural refinement in magnesium alloys through severe plastic deformation Materials Transactions. 50: 111-116. DOI: 10.2320/Matertrans.Md200818 |
0.725 |
|
| 2009 |
Gao N, Starink MJ, Langdon TG. Using differential scanning calorimetry as an analytical tool for ultrafine grained metals processed by severe plastic deformation Materials Science and Technology. 25: 687-698. DOI: 10.1179/174328409X408901 |
0.452 |
|
| 2009 |
Kawasaki M, Lee S, Langdon TG. Constructing a deformation mechanism map for a superplastic Pb–Sn alloy processed by equal-channel angular pressing Scripta Materialia. 61: 963-966. DOI: 10.1016/J.Scriptamat.2009.08.001 |
0.651 |
|
| 2009 |
Figueiredo RB, Langdon TG. Strategies for achieving high strain rate superplasticity in magnesium alloys processed by equal-channel angular pressing Scripta Materialia. 61: 84-87. DOI: 10.1016/J.Scriptamat.2009.03.012 |
0.725 |
|
| 2009 |
Edalati K, Horita Z, Langdon TG. The significance of slippage in processing by high-pressure torsion Scripta Materialia. 60: 9-12. DOI: 10.1016/J.Scriptamat.2008.08.042 |
0.353 |
|
| 2009 |
Wang ZW, Wang YB, Liao XZ, Zhao YH, Lavernia EJ, Zhu YT, Horita Z, Langdon TG. Influence of stacking fault energy on deformation mechanism and dislocation storage capacity in ultrafine-grained materials Scripta Materialia. 60: 52-55. DOI: 10.1016/J.Scriptamat.2008.08.032 |
0.454 |
|
| 2009 |
Xu C, Xia K, Langdon TG. Processing of a magnesium alloy by equal-channel angular pressing using a back-pressure Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 205-211. DOI: 10.1016/J.Msea.2009.07.063 |
0.655 |
|
| 2009 |
Kawasaki M, Horita Z, Langdon TG. Microstructural evolution in high purity aluminum processed by ECAP Materials Science and Engineering: A. 524: 143-150. DOI: 10.1016/J.Msea.2009.06.032 |
0.675 |
|
| 2009 |
Zhao YH, Guo YZ, Wei Q, Topping TD, Dangelewicz AM, Zhu YT, Langdon TG, Lavernia EJ. Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves Materials Science and Engineering A. 525: 68-77. DOI: 10.1016/J.Msea.2009.06.031 |
0.456 |
|
| 2009 |
Sun PL, Zhao YH, Cooley JC, Kassner ME, Horita Z, Langdon TG, Lavernia EJ, Zhu YT. Effect of stacking fault energy on strength and ductility of nanostructured alloys: An evaluation with minimum solution hardening Materials Science and Engineering A. 525: 83-86. DOI: 10.1016/J.Msea.2009.06.030 |
0.498 |
|
| 2009 |
Figueiredo RB, Cetlin PR, Langdon TG. The evolution of damage in perfect-plastic and strain hardening materials processed by equal-channel angular pressing Materials Science and Engineering A. 518: 124-131. DOI: 10.1016/J.Msea.2009.04.007 |
0.67 |
|
| 2009 |
Chinh NQ, Gubicza J, Czeppe T, Lendvai J, Xu C, Valiev RZ, Langdon TG. Developing a strategy for the processing of age-hardenable alloys by ECAP at room temperature Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 516: 248-252. DOI: 10.1016/J.Msea.2009.03.049 |
0.583 |
|
| Show low-probability matches. |