| Year |
Citation |
Score |
| 2023 |
Bloom E, Lin LM, Locke RC, Giordani A, Krassan E, Peloquin JM, Grävare Silbernagel K, Parreno J, Santare MH, Killian ML, Elliott DM. Overload in a Rat in Vivo Model of Synergist Ablation Induces Tendon Multi-scale Structural and Functional Degeneration. Journal of Biomechanical Engineering. 1-52. PMID 37184932 DOI: 10.1115/1.4062523 |
0.506 |
|
| 2023 |
Peloquin JM, Santare MH, Elliott DM. Volume Loss and Recovery in Bovine Knee Meniscus Loaded in Circumferential Tension. Journal of Biomechanical Engineering. 1-35. PMID 36939383 DOI: 10.1115/1.4062142 |
0.499 |
|
| 2021 |
Safa BN, Santare MH, Ethier CR, Elliott DM. Identifiability of Tissue Material Parameters from Uniaxial Tests using Multi-start Optimization. Acta Biomaterialia. PMID 33444797 DOI: 10.1016/j.actbio.2021.01.006 |
0.753 |
|
| 2020 |
Safa BN, Bloom ET, Lee AH, Santare MH, Elliott DM. Evaluation of transverse poroelastic mechanics of tendon using osmotic loading and biphasic mixture finite element modeling. Journal of Biomechanics. 109: 109892. PMID 32807341 DOI: 10.1016/J.Jbiomech.2020.109892 |
0.77 |
|
| 2020 |
Hasan M, Chen J, Waldecker JR, Singh Y, Kjeang E, Santare MH. Determining the critical plastically dissipated energy for fatigue crack growth in PEM fuel cell membrane and its environmental sensitivity International Journal of Fatigue. 138: 105697. DOI: 10.1016/J.Ijfatigue.2020.105697 |
0.414 |
|
| 2019 |
Safa B, Lee A, Santare MH, Elliott DM. Evaluating Plastic Deformation and Damage as Potential Mechanisms for Tendon Inelasticity using a Reactive Modeling Framework. Journal of Biomechanical Engineering. PMID 31004138 DOI: 10.1115/1.4043520 |
0.773 |
|
| 2018 |
Peloquin JM, Santare MH, Elliott DM. Short cracks in knee meniscus tissue cause strain concentrations, but do not reduce ultimate stress, in single-cycle uniaxial tension. Royal Society Open Science. 5: 181166. PMID 30564409 DOI: 10.1098/Rsos.181166 |
0.617 |
|
| 2018 |
Safa B, Santare MH, Elliott DM. A Reactive Inelasticity Theoretical Framework for Modeling Viscoelasticity, Plastic Deformation, and Damage in Soft Tissue. Journal of Biomechanical Engineering. PMID 30267056 DOI: 10.1115/1.4041575 |
0.762 |
|
| 2018 |
Hasan M, Goshtasbi A, Chen J, Santare MH, Ersal T. Model-Based Analysis of PFSA Membrane Mechanical Response to Relative Humidity and Load Cycling in PEM Fuel Cells Journal of the Electrochemical Society. 165: F3359-F3372. DOI: 10.1149/2.0371806Jes |
0.316 |
|
| 2017 |
Lee AH, Szczesny SE, Santare MH, Elliott DM. Investigating Mechanisms of Tendon Damage by Measuring Multi-scale Recovery Following Tensile Loading. Acta Biomaterialia. PMID 28435080 DOI: 10.1016/J.Actbio.2017.04.011 |
0.589 |
|
| 2017 |
Ding G, Karlsson AM, Santare MH. Numerical evaluation of fatigue crack growth in polymers based on plastically dissipated energy International Journal of Fatigue. 94: 89-96. DOI: 10.1016/J.Ijfatigue.2016.09.012 |
0.42 |
|
| 2016 |
Ding G, Santare MH, Karlsson AM, Kusoglu A. Numerical evaluation of crack growth in polymer electrolyte fuel cell membranes based on plastically dissipated energy Journal of Power Sources. 316: 114-123. DOI: 10.1016/J.Jpowsour.2016.03.031 |
0.416 |
|
| 2016 |
Minnicino MA, Santare MH. Predicting microdroplet force response using a multiscale modeling approach Composites Part a: Applied Science and Manufacturing. 80: 39-52. DOI: 10.1016/J.Compositesa.2015.10.005 |
0.376 |
|
| 2015 |
Peloquin JM, Santare MH, Elliott DM. Advances in quantification of meniscus tensile mechanics including nonlinearity, yield, and failure. Journal of Biomechanical Engineering. PMID 26720401 DOI: 10.1115/1.4032354 |
0.605 |
|
| 2015 |
Chen X, Zhou Y, Wang L, Santare MH, Wan LQ, Lu XL. Determining Tension-Compression Nonlinear Mechanical Properties of Articular Cartilage from Indentation Testing. Annals of Biomedical Engineering. PMID 26240062 DOI: 10.1007/S10439-015-1402-8 |
0.447 |
|
| 2015 |
Khattra NS, Santare MH, Karlsson AM, Schmiedel T, Busby FC. Effect of water transport on swelling and stresses in PFSA membranes Fuel Cells. 15: 178-188. DOI: 10.1002/Fuce.201400058 |
0.304 |
|
| 2014 |
Lu Z, Santare MH, Karlsson AM, Busby FC, Walsh P. Time-dependent mechanical behavior of proton exchange membrane fuel cell electrodes Journal of Power Sources. 245: 543-552. DOI: 10.1016/J.Jpowsour.2013.07.013 |
0.341 |
|
| 2013 |
Khattra NS, Lu Z, Karlsson AM, Santare MH, Busby FC, Schmiedel T. Time-dependent mechanical response of a composite PFSA membrane Journal of Power Sources. 228: 256-269. DOI: 10.1016/J.Jpowsour.2012.11.116 |
0.36 |
|
| 2012 |
Lu Z, Lugo M, Santare MH, Karlsson AM, Busby FC, Walsh P. An experimental investigation of strain rate, temperature and humidity effects on the mechanical behavior of a perfluorosulfonic acid membrane Journal of Power Sources. 214: 130-136. DOI: 10.1016/J.Jpowsour.2012.04.094 |
0.31 |
|
| 2012 |
Khattra NS, Karlsson AM, Santare MH, Walsh P, Busby FC. Effect of time-dependent material properties on the mechanical behavior of PFSA membranes subjected to humidity cycling Journal of Power Sources. 214: 365-376. DOI: 10.1016/J.Jpowsour.2012.04.065 |
0.361 |
|
| 2012 |
Minnicino MA, Santare MH. Modeling the progressive damage of the microdroplet test using contact surfaces with cohesive behavior Composites Science and Technology. 72: 2024-2031. DOI: 10.1016/J.Compscitech.2012.09.009 |
0.405 |
|
| 2011 |
Lu Z, Kim C, Karlsson AM, Cross JC, Santare MH. Effect of gas diffusion layer modulus and land-groove geometry on membrane stresses in proton exchange membrane fuel cells Journal of Power Sources. 196: 4646-4654. DOI: 10.1016/J.Jpowsour.2011.01.028 |
0.321 |
|
| 2011 |
Chandrasekaran VCS, Advani SG, Santare MH. Influence of resin properties on interlaminar shear strength of glass/epoxy/MWNT hybrid composites Composites Part a: Applied Science and Manufacturing. 42: 1007-1016. DOI: 10.1016/J.Compositesa.2011.04.004 |
0.361 |
|
| 2011 |
Kusoglu A, Santare MH, Karlsson AM. Aspects of fatigue failure mechanisms in polymer fuel cell membranes Journal of Polymer Science, Part B: Polymer Physics. 49: 1506-1517. DOI: 10.1002/Polb.22336 |
0.333 |
|
| 2010 |
Kusoglu A, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Numerical investigation of mechanical durability in polymer electrolyte membrane fuel cells Journal of the Electrochemical Society. 157. DOI: 10.1149/1.3328496 |
0.356 |
|
| 2010 |
Kusoglu A, Tang Y, Lugo M, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Constitutive response and mechanical properties of PFSA membranes in liquid water Journal of Power Sources. 195: 483-492. DOI: 10.1016/J.Jpowsour.2009.08.010 |
0.332 |
|
| 2010 |
Chandrasekaran VCS, Advani SG, Santare MH. Role of processing on interlaminar shear strength enhancement of epoxy/glass fiber/multi-walled carbon nanotube hybrid composites Carbon. 48: 3692-3699. DOI: 10.1016/J.Carbon.2010.06.010 |
0.329 |
|
| 2009 |
Johnson BB, Santare MH, Novotny JE, Advani SG. WEAR BEHAVIOR OF CARBON NANOTUBE/HIGH DENSITY POLYETHYLENE COMPOSITES. Mechanics of Materials : An International Journal. 41: 1108-1115. PMID 20161101 DOI: 10.1016/J.Mechmat.2009.04.003 |
0.32 |
|
| 2009 |
Kusoglu A, Tang Y, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Stress-strain behavior of perfluorosulfonic acid membranes at various temperatures and humidities: Experiments and phenomenological modeling Journal of Fuel Cell Science and Technology. 6: 0110121-0110128. DOI: 10.1115/1.2971069 |
0.397 |
|
| 2009 |
Kusoglu A, Santare MH, Karlsson AM. Mechanics-based model for non-affine swelling in perfluorosulfonic acid (PFSA) membranes Polymer. 50: 2481-2491. DOI: 10.1016/J.Polymer.2009.03.045 |
0.308 |
|
| 2009 |
Wang X, Santare MH, Gazonas GA. Anisotropic effective moduli of microcracked materials under antiplane loading Engineering Fracture Mechanics. 76: 1910-1919. DOI: 10.1016/J.Engfracmech.2009.04.010 |
0.42 |
|
| 2009 |
Wang X, Gazonas GA, Santare MH. On the effective electroelastic properties of microcracked generally anisotropic solids International Journal of Fracture. 158: 27-40. DOI: 10.1007/S10704-009-9363-2 |
0.398 |
|
| 2008 |
Tang Y, Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Mechanical properties of a reinforced composite polymer electrolyte membrane and its simulated performance in PEM fuel cells Journal of Power Sources. 175: 817-825. DOI: 10.1016/J.Jpowsour.2007.09.093 |
0.371 |
|
| 2008 |
Fan Z, Santare MH, Advani SG. Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes Composites Part a: Applied Science and Manufacturing. 39: 540-554. DOI: 10.1016/J.Compositesa.2007.11.013 |
0.341 |
|
| 2008 |
Kusoglu A, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Micromechanics model based on the nanostructure of PFSA membranes Journal of Polymer Science, Part B: Polymer Physics. 46: 2404-2417. DOI: 10.1002/Polb.21573 |
0.312 |
|
| 2007 |
Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Mechanical behavior of fuel cell membranes under humidity cycles and effect of swelling anisotropy on the fatigue stresses Journal of Power Sources. 170: 345-358. DOI: 10.1016/J.Jpowsour.2007.03.063 |
0.354 |
|
| 2007 |
Su D, Santare MH, Gazonas GA. The effect of crack face contact on the anisotropic effective moduli of microcrack damaged media Engineering Fracture Mechanics. 74: 1436-1455. DOI: 10.1016/J.Engfracmech.2006.08.015 |
0.467 |
|
| 2006 |
Tang Y, Santare MH, Karlsson AM, Cleghorn S, Johnson WB. Stresses in proton exchange membranes due to hygro-thermal loading Journal of Fuel Cell Science and Technology. 3: 119-124. DOI: 10.1115/1.2173666 |
0.306 |
|
| 2006 |
Tang Y, Karlsson AM, Santare MH, Gilbert M, Cleghorn S, Johnson WB. An experimental investigation of humidity and temperature effects on the mechanical properties of perfluorosulfonic acid membrane Materials Science and Engineering A. 425: 297-304. DOI: 10.1016/J.Msea.2006.03.055 |
0.348 |
|
| 2006 |
Kusoglu A, Karlsson AM, Santare MH, Cleghorn S, Johnson WB. Mechanical response of fuel cell membranes subjected to a hygro-thermal cycle Journal of Power Sources. 161: 987-996. DOI: 10.1016/J.Jpowsour.2006.05.020 |
0.392 |
|
| 2005 |
Pinho ST, Martins HB, Camanho PP, Santare MH, de Castro PMST. Residual stress field and reduction of stress intensity factors in cold-worked holes Theoretical and Applied Fracture Mechanics. 44: 168-177. DOI: 10.1016/J.Tafmec.2005.06.005 |
0.409 |
|
| 2003 |
Santare MH, Novotny JE, Tang W, Advani SG. Mechanical characterization of a nanotube-polyethylene composite material American Society of Mechanical Engineers, Materials Division (Publication) Md. 98: 175-179. DOI: 10.1115/Imece2003-43351 |
0.305 |
|
| 2003 |
Thamburaj P, Santare MH, Gazonas GA. The effect of graded strength on damage propagation in continuously nonhomogeneous materials Journal of Engineering Materials and Technology, Transactions of the Asme. 125: 412-417. DOI: 10.1115/1.1605116 |
0.399 |
|
| 2003 |
Santare MH, Thamburaj P, Gazonas GA. The use of graded finite elements in the study of elastic wave propagation in continuously nonhomogeneous materials International Journal of Solids and Structures. 40: 5621-5634. DOI: 10.1016/S0020-7683(03)00315-9 |
0.364 |
|
| 2002 |
Cheeseman BA, Santare MH. Thermal residual stress and interphase effects on crack-inclusion interactions Journal of Composite Materials. 36: 553-569. DOI: 10.1177/0021998302036005489 |
0.467 |
|
| 2002 |
Anlas G, Lambros J, Santare MH. Dominance of asymptotic crack tip fields in elastic functionally graded materials International Journal of Fracture. 115: 193-204. DOI: 10.1023/A:1016372120480 |
0.722 |
|
| 2001 |
Ribble TG, Santare MH, Miller F. Stresses in the growth plate of the developing proximal femur Journal of Applied Biomechanics. 17: 129-141. DOI: 10.1123/Jab.17.2.129 |
0.358 |
|
| 2001 |
Cheeseman BA, Santare MH. The effect of the interphase on crack-inclusion interactions International Journal of Fracture. 109: 303-323. DOI: 10.1023/A:1011092801013 |
0.439 |
|
| 2000 |
Joshi MG, Advani SG, Miller F, Santare MH. Analysis of a femoral hip prosthesis designed to reduce stress shielding. Journal of Biomechanics. 33: 1655-62. PMID 11006390 DOI: 10.1016/S0021-9290(00)00110-X |
0.305 |
|
| 2000 |
Joshi MG, Santare MH, Advani SG. Survey of Stress Analyses of the Femoral Hip Prosthesis Applied Mechanics Reviews. 53: 1-18. DOI: 10.1115/1.3097335 |
0.35 |
|
| 2000 |
Santare MH, Lambros J. Use of graded finite elements to model the behavior of nonhomogeneous materials Journal of Applied Mechanics, Transactions Asme. 67: 819-822. DOI: 10.1115/1.1328089 |
0.356 |
|
| 2000 |
Cheeseman BA, Santare MH. Interaction of a curved crack with a circular elastic inclusion International Journal of Fracture. 103: 259-277. DOI: 10.1023/A:1007663913279 |
0.453 |
|
| 2000 |
Anlas G, Santare MH, Lambros J. Numerical calculation of stress intensity factors in functionally graded materials International Journal of Fracture. 104: 131-143. DOI: 10.1023/A:1007652711735 |
0.719 |
|
| 2000 |
Li H, Lambros J, Cheeseman BA, Santare MH. Experimental investigation of the quasi-static fracture of functionally graded materials International Journal of Solids and Structures. 37: 3715-3732. DOI: 10.1016/S0020-7683(99)00056-6 |
0.413 |
|
| 1999 |
Reinhardt A, Advani SG, Santare MH, Miller F. Preliminary Study on Composite Hip Prostheses Made by Resin Transfer Molding Journal of Composite Materials. 33: 852-870. DOI: 10.1177/002199839903300904 |
0.348 |
|
| 1999 |
Lambros J, Narayanaswamy A, Santare MH, Anlas G. Manufacture and Testing of a Functionality Graded Material Journal of Engineering Materials and Technology-Transactions of the Asme. 121: 488-493. DOI: 10.1115/1.2812406 |
0.69 |
|
| 1999 |
Feltman RS, Santare MH. Anisotropic effective moduli of cracked short-fiber reinforced composites Journal of Applied Mechanics, Transactions Asme. 66: 709-713. DOI: 10.1115/1.2791629 |
0.412 |
|
| 1999 |
Lambros J, Santare MH, Li H, Sapna GH. A novel technique for the fabrication of laboratory scale model functionally graded materials Experimental Mechanics. 39: 184-190. DOI: 10.1007/Bf02323551 |
0.379 |
|
| 1998 |
Roth CA, Bartolozzi AR, Ciccotti MG, Wetzler MJ, Gillespie MJ, Snyder-Mackler L, Santare MH. Failure properties of suture anchors in the glenoid and the effects of cortical thickness Arthroscopy. 14: 186-191. PMID 9531131 DOI: 10.1016/S0749-8063(98)70039-8 |
0.349 |
|
| 1997 |
Rosselli F, Santare MH. Comparison of the short beam shear (SBS) and interlaminar shear device (ISD) tests Composites Part a: Applied Science and Manufacturing. 28: 587-594. DOI: 10.1016/S1359-835X(97)00009-2 |
0.375 |
|
| 1996 |
Wetzler MJ, Bartolozzi AR, Gillespie MJ, Roth CA, Ciccotti MG, Snyder-Mackler L, Santare MH. Fatigue properties of suture anchors in anterior shoulder reconstructions: Mitek GII Arthroscopy. 12: 687-693. PMID 9115556 DOI: 10.1016/S0749-8063(96)90171-1 |
0.354 |
|
| 1996 |
Cheeseman BA, Santare MH, O'Toole BJ. Flexural failure of notched curved composite beams Engineering Fracture Mechanics. 54: 479-498. DOI: 10.1016/0013-7944(95)00226-X |
0.706 |
|
| 1995 |
Santare MH. Dislocation inside an isotropic elliptical inclusion surrounded by an anisotropic medium Journal of Applied Mechanics, Transactions Asme. 62: 537-539. DOI: 10.1115/1.2895965 |
0.402 |
|
| 1995 |
Anlas G, Santare MH, Hall IW. Modeling the effect of fiber breakage on the elastic properties of short-fiber composites Composites Science and Technology. 54: 113-122. DOI: 10.1016/0266-3538(95)00039-9 |
0.715 |
|
| 1995 |
Santare MH, Crocombe AD, Anlas G. Anisotropic effective moduli of materials with microcracks Engineering Fracture Mechanics. 52: 833-842. DOI: 10.1016/0013-7944(95)00059-5 |
0.731 |
|
| 1993 |
Anlas G, Santare MH. Arbitrarily oriented crack inside an elliptical inclusion Journal of Applied Mechanics, Transactions Asme. 60: 589-594. DOI: 10.1115/1.2900844 |
0.715 |
|
| 1993 |
Anlas G, Santare MH. A model for matrix cracking in short fiber composites International Journal of Solids and Structures. 30: 1701-1713. DOI: 10.1016/0020-7683(93)90199-H |
0.72 |
|
| 1993 |
Patton EM, Santare MH. Crack path prediction near an elliptical inclusion Engineering Fracture Mechanics. 44: 195-205. DOI: 10.1016/0013-7944(93)90044-S |
0.432 |
|
| 1991 |
Santare MH, O'Toole BJ, Patton EM. Two-dimensional crack inclusion interaction effects. Analysis and experiments Journal of Pressure Vessel Technology, Transactions of the Asme. 113: 392-397. DOI: 10.1115/1.2928772 |
0.734 |
|
| 1991 |
Selçuk Ardiç E, Santare MH. A nonclassical stress analysis for a laminated composite section Composites Science and Technology. 41: 63-75. DOI: 10.1016/0266-3538(91)90053-R |
0.382 |
|
| 1991 |
Lotter RE, Santare MH. Analysis of Mode I and Mode II interlaminar fracture specimens by a comparative finite element method Composites Science and Technology. 40: 87-107. DOI: 10.1016/0266-3538(91)90044-P |
0.353 |
|
| 1990 |
Ardiç ES, Santare MH, Tsu-Wei C. A nonclassical model for the stresses in 3-d continuous fiber-reinforced composite materials International Journal of Solids and Structures. 26: 643-653. DOI: 10.1016/0020-7683(90)90035-T |
0.424 |
|
| 1990 |
O'Toole BJ, Santare MH. Photoelastic investigation of crack-inclusion interaction Experimental Mechanics. 30: 253-257. DOI: 10.1007/Bf02322819 |
0.493 |
|
| 1990 |
Patton EM, Santare MH. The effect of a rigid elliptical inclusion on a straight crack International Journal of Fracture. 46: 71-79. DOI: 10.1007/Bf00034169 |
0.427 |
|
| 1989 |
Ardiç ES, Santare MH, Chou TW. Stress fields in a composite material by means of a non-classical approach International Journal of Engineering Science. 27: 1397-1405. DOI: 10.1016/0020-7225(89)90063-3 |
0.386 |
|
| 1989 |
Santare MH, O'Toole BJ, Paton EM. Two dimensional crack inclusion interaction effects: analysis and experiments American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) Pvp. 176: 93-100. |
0.346 |
|
| 1987 |
Santare MH, Keer LM, Lewis JL. Cracks emanating from a fluid filled void loaded in compression: application to the bone-implant interface. Journal of Biomechanical Engineering. 109: 55-9. PMID 3560880 DOI: 10.1115/1.3138642 |
0.581 |
|
| 1986 |
Santare MH, Keer LM. INTERACTION BETWEEN AN EDGE DISLOCATION AND A RIGID ELLIPTICAL INCLUSION Journal of Applied Mechanics, Transactions Asme. 53: 382-385. DOI: 10.1115/1.3171768 |
0.48 |
|
| Show low-probability matches. |
