| Year |
Citation |
Score |
| 2019 |
Warchol MFA, Watt TJ, Motes DT, Warchol L, Taleff EM. Exploiting Acoustic Anisotropy to Detect Recrystallization in a Ni Single Crystal Using Ultrasonic Nondestructive Inspection Journal of Materials Engineering and Performance. 28: 6298-6306. DOI: 10.1007/S11665-019-04326-2 |
0.331 |
|
| 2019 |
Ivanoff TA, Watt TJ, Taleff EM. Characterization of Solidification Microstructures in Vacuum Arc Remelted Nickel Alloy 718 Metallurgical and Materials Transactions B-Process Metallurgy and Materials Processing Science. 50: 700-715. DOI: 10.1007/S11663-019-01530-2 |
0.302 |
|
| 2019 |
Noell PJ, Taleff EM. Subgrains, Texture Evolution, and Dynamic Abnormal Grain Growth in a Mo Rod Material Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 4608-4619. DOI: 10.1007/S11661-019-05370-2 |
0.511 |
|
| 2019 |
Ivanoff TA, Carter JT, Hector LG, Taleff EM. Retrogression and Reaging Applied to Warm Forming of High-Strength Aluminum Alloy AA7075-T6 Sheet Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 50: 1545-1561. DOI: 10.1007/S11661-018-5084-3 |
0.482 |
|
| 2017 |
Noell PJ, Worthington DL, Taleff EM. Growth of preexisting abnormal grains in molybdenum under static and dynamic conditions Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 692: 24-34. DOI: 10.1016/J.Msea.2017.03.021 |
0.562 |
|
| 2016 |
Antoniswamy AR, Weldon AJ, Taleff EM, Hector LG, Carter JT. Hot forming of Mg AZ31B alloy sheet processed by warm rolling Materials Science Forum. 838: 157-165. DOI: 10.4028/Www.Scientific.Net/Msf.838-839.157 |
0.61 |
|
| 2016 |
Noell PJ, Taleff EM. The Effects of Grain Size and Texture on Dynamic Abnormal Grain Growth in Mo Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 47: 5023-5036. DOI: 10.1007/S11661-016-3644-Y |
0.508 |
|
| 2016 |
Ivanoff TA, Watt TJ, Taleff EM. Microstructure Characterization of Nickel Alloy 718 with Automated Optical Image Processing Characterization of Minerals, Metals, and Materials. 19-25. DOI: 10.1007/978-3-319-48210-1_3 |
0.324 |
|
| 2015 |
Antoniswamy AR, Taleff EM, Hector LG, Carter JT. Plastic deformation and ductility of magnesium AZ31B-H24 alloy sheet from 22 to 450°C Materials Science and Engineering A. 631: 1-9. DOI: 10.1016/J.Msea.2015.02.018 |
0.584 |
|
| 2015 |
Noell PJ, Taleff EM. Dynamic Abnormal Grain Growth in Refractory Metals Jom. 67: 2642-2645. DOI: 10.1007/S11837-015-1592-4 |
0.546 |
|
| 2015 |
Noell PJ, Worthington DL, Taleff EM. The Initiation and Propagation of Dynamic Abnormal Grain Growth in Molybdenum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 46: 5708-5718. DOI: 10.1007/S11661-015-3188-6 |
0.569 |
|
| 2015 |
Taleff EM, Antoniswamy AR, Carpenter AJ, Yavuz E. The Effects of Plastic Anisotropy in Warm and Hot Forming of Magnesium Sheet Materials Magnesium Technology. 263-266. DOI: 10.1007/978-3-319-48185-2_49 |
0.509 |
|
| 2014 |
Morovat MA, Engelhardt MD, Helwig TA, Taleff EM. High-temperature creep buckling phenomenon of steel columns subjected to fire Journal of Structural Fire Engineering. 5: 189-202. DOI: 10.1260/2040-2317.5.3.189 |
0.378 |
|
| 2014 |
Pedrazas NA, Buchheit TE, Holm EA, Taleff EM. Dynamic abnormal grain growth in tantalum Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 610: 76-84. DOI: 10.1016/J.Msea.2014.05.031 |
0.517 |
|
| 2014 |
Carpenter AJ, Antoniswamy AR, Carter JT, Hector LG, Taleff EM. A mechanism-dependent material model for the effects of grain growth and anisotropy on plastic deformation of magnesium alloy AZ31 sheet at 450 C Acta Materialia. 68: 254-266. DOI: 10.1016/J.Actamat.2014.01.043 |
0.588 |
|
| 2014 |
Antoniswamy AR, Carter JT, Hector LG, Taleff EM. Static recrystallization and grain growth in AZ31B-H24 magnesium alloy sheet Magnesium Technology. 139-142. DOI: 10.1007/978-3-319-48231-6_29 |
0.483 |
|
| 2013 |
Taleff EM, Pedrazas NA. Materials science. A new route for growing large grains in metals. Science (New York, N.Y.). 341: 1461-2. PMID 24072912 DOI: 10.1126/Science.1245056 |
0.522 |
|
| 2013 |
Carpenter AJ, Barnes AJ, Taleff EM. High-temperature deformation of magnesium elektron™ 43 Materials Science Forum. 735: 93-100. DOI: 10.4028/Www.Scientific.Net/Msf.735.93 |
0.627 |
|
| 2013 |
Carpenter AJ, Taleff EM, Hector LG, Carter JT, Krajewski PE. A time-dependent material model for the simulation of hot gas-pressure forming of magnesium alloy AZ31 Materials Science Forum. 735: 198-203. DOI: 10.4028/Www.Scientific.Net/Msf.735.198 |
0.387 |
|
| 2013 |
Antoniswamy AR, Carpenter AJ, Carter JT, Hector LG, Taleff EM. Forming-limit diagrams for magnesium AZ31B and ZEK100 alloy sheets at elevated temperatures Journal of Materials Engineering and Performance. 22: 3389-3397. DOI: 10.1007/S11665-013-0623-Y |
0.549 |
|
| 2013 |
Worthington DL, Pedrazas NA, Noell PJ, Taleff EM. Dynamic abnormal grain growth in molybdenum Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 44: 5025-5038. DOI: 10.1007/S11661-013-1865-X |
0.573 |
|
| 2013 |
Carpenter AJ, Carter JT, Hector LG, Taleff EM. Gas-Pressure Bulge Forming of Mg AZ31 Sheet at 450°C Magnesium Technology. 139-144. DOI: 10.1007/978-3-319-48150-0_23 |
0.508 |
|
| 2012 |
McNelley T, Oh-Ishi K, Swaminathan S, Bradley J, Krajewski P, Taleff EM. Characteristics of the GBS - SDC transition during bi-axial forming of AA5083 Materials Science Forum. 735: 43-48. DOI: 10.4028/Www.Scientific.Net/Msf.735.43 |
0.476 |
|
| 2012 |
Morovat MA, Lee J, Engelhardt MD, Taleff EM, Helwig TA, Segrest VA. Creep properties of ASTM A992 steel at elevated temperatures Advanced Materials Research. 446: 786-792. DOI: 10.4028/Www.Scientific.Net/Amr.446-449.786 |
0.453 |
|
| 2012 |
Pedrazas NA, Worthington DL, Dalton DA, Sherek PA, Steuck SP, Quevedo HJ, Bernstein AC, Taleff EM, Ditmire T. Effects of microstructure and composition on spall fracture in aluminum Materials Science and Engineering A. 536: 117-123. DOI: 10.1016/J.Msea.2011.12.083 |
0.468 |
|
| 2012 |
Sherek PA, Carpenter AJ, Hector LG, Krajewski PE, Carter JT, Lasceski J, Taleff EM. The effects of strain and stress state in hot forming of mg AZ31 sheet Magnesium Technology. 301-306. DOI: 10.1007/978-3-319-48203-3_55 |
0.498 |
|
| 2011 |
Morovat MA, Engelhardt MD, Taleff EM, Helwig T. Importance of Time-Dependent Material Behavior in Predicting Strength of Steel Columns Exposed to Fire Applied Mechanics and Materials. 82: 350-355. DOI: 10.4028/Www.Scientific.Net/Amm.82.350 |
0.414 |
|
| 2011 |
Dalton DA, Worthington DL, Sherek PA, Pedrazas NA, Quevedo HJ, Bernstein AC, Rambo P, Schwarz J, Edens A, Geissel M, Smith IC, Taleff EM, Ditmire T. Microstructure dependence of dynamic fracture and yielding in aluminum and an aluminum alloy at strain rates of 2 × 106 s-1 and faster Journal of Applied Physics. 110. DOI: 10.1063/1.3660214 |
0.476 |
|
| 2010 |
Taleff EM. An Overview of Hot- and Warm-Forming of Al-Mg Alloys Key Engineering Materials. 433: 259-265. DOI: 10.4028/Www.Scientific.Net/Kem.433.259 |
0.481 |
|
| 2010 |
Hector LG, Krajewski PE, Taleff EM, Carter JT. High-temperature forming of a vehicle closure component in Fine-grained aluminum alloy AA5083: Finite element simulations and experiments Key Engineering Materials. 433: 197-209. DOI: 10.4028/Www.Scientific.Net/Kem.433.197 |
0.504 |
|
| 2010 |
Sherek PA, Hector LG, Bradley JR, Krajewski PE, Taleff EM. Simulation and experiments for hot forming of rectangular pans in fine-grained aluminum alloy AA5083 Key Engineering Materials. 433: 185-195. DOI: 10.4028/Www.Scientific.Net/Kem.433.185 |
0.364 |
|
| 2010 |
Taleff EM, Hector LG, Bradley JR, Verma R, Krajewski PE. Local thinning at a die entry radius during hot gas-pressure forming of an AA5083 sheet Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0110161-0110167. DOI: 10.1115/1.4000884 |
0.402 |
|
| 2010 |
Qiao J, Taleff EM. Superplasticity-like creep behavior of coarse grained ternary Al alloys Transactions of Nonferrous Metals Society of China (English Edition). 20: 564-571. DOI: 10.1016/S1003-6326(09)60179-5 |
0.418 |
|
| 2010 |
Chang JK, Takata K, Ichitani K, Taleff EM. Ductility of an aluminum-4.4wt. pct. magnesium alloy at warm- and hot-working temperatures Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 527: 3822-3828. DOI: 10.1016/J.Msea.2010.02.042 |
0.569 |
|
| 2010 |
Taleff EM, Hector LG, Verma R, Krajewski PE, Chang JK. Material models for simulation of superplastic Mg alloy sheet forming Journal of Materials Engineering and Performance. 19: 488-494. DOI: 10.1007/S11665-010-9612-6 |
0.54 |
|
| 2010 |
Chang JK, Takata K, Ichitani K, Taleff EM. Abnormal grain growth and recrystallization in Al-Mg alloy AA5182 following hot deformation Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 41: 1942-1953. DOI: 10.1007/S11661-010-0213-7 |
0.54 |
|
| 2009 |
Dalton DA, Worthington DL, Sherek PA, Pedrazas NA, Bernstein AC, Quevedo HJ, Rambo P, Schwarz J, Edens A, Geissel M, Smith IC, Taleff EM, Ditmire T. Spall and dynamic yielding of aluminum and aluminum alloys at strain rates of 3×106 s-1 Aip Conference Proceedings. 1195: 969-972. DOI: 10.1063/1.3295307 |
0.511 |
|
| 2009 |
Ciulik J, Taleff EM. Dynamic abnormal grain growth: A new method to produce single crystals Scripta Materialia. 61: 895-898. DOI: 10.1016/J.Scriptamat.2009.07.021 |
0.739 |
|
| 2009 |
Chang JK, Taleff EM, Krajewski PE, Ciulik JR. Effects of atmosphere in filament formation on a superplastically deformed aluminum–magnesium alloy Scripta Materialia. 60: 459-462. DOI: 10.1016/J.Scriptamat.2008.11.031 |
0.749 |
|
| 2009 |
Taleff EM, Hector LG, Bradley JR, Verma R, Krajewski PE. The effect of stress state on high-temperature deformation of fine-grained aluminum-magnesium alloy AA5083 sheet Acta Materialia. 57: 2812-2822. DOI: 10.1016/J.Actamat.2009.02.036 |
0.544 |
|
| 2009 |
Verma R, Hector LG, Krajewski PE, Taleff EM. The finite element simulation of high-temperature magnesium AZ31 sheet forming Jom. 61: 29-37. DOI: 10.1007/S11837-009-0118-3 |
0.378 |
|
| 2009 |
Chang J“, Taleff EM, Krajewski PE. Effect of microstructure on cavitation during hot deformation of a fine-grained aluminum-magnesium alloy as revealed through three-dimensional characterization Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 40: 3128-3137. DOI: 10.1007/S11661-009-0061-5 |
0.505 |
|
| 2008 |
Dalton DA, Brewer JL, Bernstein AC, Grigsby W, Milathianaki D, Jackson ED, Adams RG, Rambo P, Schwarz J, Edens A, Geissel M, Smith I, Taleff EM, Ditmire T. Laser-induced spallation of aluminum and Al alloys at strain rates above 2 × 106 s-1 Journal of Applied Physics. 104. DOI: 10.1063/1.2949276 |
0.519 |
|
| 2008 |
Takigawa Y, Aguirre JV, Taleff EM, Higashi K. Cavitation during grain-boundary-sliding deformation in an AZ61 magnesium alloy Materials Science and Engineering A. 497: 139-146. DOI: 10.1016/J.Msea.2008.06.026 |
0.588 |
|
| 2008 |
Du N, Bower AF, Krajewski PE, Taleff EM. The influence of a threshold stress for grain boundary sliding on constitutive response of polycrystalline Al during high temperature deformation Materials Science and Engineering: A. 494: 86-91. DOI: 10.1016/J.Msea.2007.10.089 |
0.506 |
|
| 2008 |
McNelley TR, Oh-Ishi K, Zhilyaev AP, Swaminathan S, Krajewski PE, Taleff EM. Characteristics of the transition from grain-boundary sliding to solute drag creep in superplastic AA5083 Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 39: 50-64. DOI: 10.1007/S11661-007-9401-5 |
0.589 |
|
| 2007 |
Kulas MA, Krajewski PE, Bradley JR, Taleff EM. Forming Limit Diagrams for AA5083 under SPF and QPF Conditions Materials Science Forum. 129-134. DOI: 10.4028/Www.Scientific.Net/Msf.551-552.129 |
0.782 |
|
| 2007 |
Dalton DA, Brewer J, Bernstein AC, Grigsby W, Milathianaki D, Jackson E, Adams R, Rambo P, Schwarz J, Edens A, Geissel M, Smith I, Taleff E, Ditmire T. Laser-induced spall of aluminum and aluminum alloys at high strain rates Aip Conference Proceedings. 955: 501-504. DOI: 10.1063/1.2833119 |
0.434 |
|
| 2007 |
Ciulik J, Taleff EM. Power-law creep of powder-metallurgy grade molybdenum sheet Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 463: 197-202. DOI: 10.1016/J.Msea.2006.09.113 |
0.753 |
|
| 2007 |
Kulas MA, Krajewski PE, Bradley JR, Taleff EM. Forming-limit diagrams for hot-forming of AA5083 aluminum sheet: Continuously cast material Journal of Materials Engineering and Performance. 16: 308-313. DOI: 10.1007/S11665-007-9057-8 |
0.497 |
|
| 2007 |
Agarwal S, Briant CL, Krajewski PE, Bower AF, Taleff EM. Experimental validation of two-dimensional finite element method for simulating constitutive response of polycrystals during high temperature plastic deformation Journal of Materials Engineering and Performance. 16: 170-178. DOI: 10.1007/S11665-007-9028-0 |
0.5 |
|
| 2007 |
Brewer JL, Dalton DA, Jackson ED, Bernstein AC, Grigsby W, Taleff EM, Ditmire T. Influence of microstructure on the spall failure of aluminum materials Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 38: 2666-2673. DOI: 10.1007/S11661-007-9205-7 |
0.519 |
|
| 2006 |
Bless SJ, Tarcza K, Chau R, Taleff EM, Persad C. Dynamic fracture of tungsten heavy alloys International Journal of Impact Engineering. 33: 100-108. DOI: 10.1016/J.Ijimpeng.2006.09.028 |
0.419 |
|
| 2006 |
Kulas MA, Green WP, Taleff EM, Krajewski PE, McNelley TR. Failure mechanisms in superplastic AA5083 materials Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 645-655. DOI: 10.1007/S11661-006-0036-8 |
0.803 |
|
| 2006 |
Green WP, Kulas MA, Niazi A, Oishi K, Taleff EM, Krajewski PE, McNelley TR. Deformation and Failure of a Superplastic AA5083 Aluminum Material with a Cu Addition Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 37: 2727-2738. DOI: 10.1007/Bf02586106 |
0.785 |
|
| 2005 |
Taleff EM, Green WP, Kulas MA, McNelley TR, Krajewski PE. Analysis, representation, and prediction of creep transients in Class I alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 410: 32-37. DOI: 10.1016/J.Msea.2005.08.085 |
0.785 |
|
| 2005 |
Kulas MA, Green WP, Taleff EM, Krajewski PE, McNelley TR. Deformation mechanisms in superplastic AA5083 materials Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 36: 1249-1261. DOI: 10.1007/S11661-005-0217-X |
0.811 |
|
| 2004 |
Wang J, Taleff EM, Kovar D. Superplastic deformation of A12O3/Y-TZP particulate composites and laminates Acta Materialia. 52: 5485-5491. DOI: 10.1016/J.Actamat.2004.08.008 |
0.473 |
|
| 2004 |
Wang J, Taleff EM, Kovar D. High-temperature deformation of Al2O3/Y-TZP particulate laminates Acta Materialia. 52: 4685-4693. DOI: 10.1016/J.Actamat.2004.06.034 |
0.433 |
|
| 2003 |
Syn CK, Lesuer DR, Sherby OD, Taleff EM. Stress-Strain Rate Relations in Ultrahigh Carbon Steels Deformed in the Ferrite Range of Temperature Materials Science Forum. 853-858. DOI: 10.4028/Www.Scientific.Net/Msf.426-432.853 |
0.521 |
|
| 2003 |
Wang J, Taleff EM, Kovar D. High-temperature deformation of Al2O3/Y-TZP particulate composites Acta Materialia. 51: 3571-3583. DOI: 10.1016/S1359-6454(03)00175-7 |
0.467 |
|
| 2003 |
Balderach DC, Hamilton JA, Leung E, Tejeda MC, Qiao J, Taleff EM. The paint–bake response of three Al–Mg–Zn alloys Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 339: 194-204. DOI: 10.1016/S0921-5093(02)00158-2 |
0.569 |
|
| 2002 |
Fernández-Vicente A, Carsí M, Peñalba F, Taleff E, Ruano OA. Toughness dependence on the microstructural parameters for an ultrahigh carbon steel (1.3 wt.% C) Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 335: 175-185. DOI: 10.1016/S0921-5093(01)01916-5 |
0.443 |
|
| 2002 |
Sherby OD, Taleff EM. Influence of grain size, solute atoms and second-phase particles on creep behavior of polycrystalline solids Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 322: 89-99. DOI: 10.1016/S0921-5093(01)01121-2 |
0.565 |
|
| 2002 |
Sullivan TO, Byman NA, Landry F, Kolman DG, Taleff EM. Corrosion resistance of structural materials to Ga2O at 1000 °C Journal of Nuclear Materials. 303: 73-81. DOI: 10.1016/S0022-3115(02)00796-1 |
0.338 |
|
| 2002 |
Taleff EM, Lewandowski JJ, Pourladian B. Microstructure-property relationships in pearlitic eutectoid and hypereutectoid carbon steels Jom. 54: 25-30. DOI: 10.1007/Bf02700982 |
0.404 |
|
| 2002 |
Taleff EM. Microstructure-property relationships in steels: Improving performance Jom. 54: 18-18. DOI: 10.1007/Bf02700980 |
0.332 |
|
| 2001 |
Taleff EM, Bramfitt BL, Syn CK, Lesuer DR, Wadsworth J, Sherby OD. Processing, structure, and properties of a rolled, ultrahigh-carbon steel plate exhibiting a damask pattern Materials Characterization. 46: 11-18. DOI: 10.1016/S1044-5803(00)00087-5 |
0.442 |
|
| 2001 |
Taleff EM, Nevland PJ, Krajewski PE. Tensile ductility of several commercial aluminum alloys at elevated temperatures Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 32: 1119-1130. DOI: 10.1007/S11661-001-0123-9 |
0.604 |
|
| 2000 |
Taleff EM, Leon-Salamanca T, Ketcham RA, Reyes R, Carlson WD. Nondestructive evaluation of cavitation in an Al-Mg material deformed under creep conditions Journal of Materials Research. 15: 76-84. DOI: 10.1557/Jmr.2000.0015 |
0.388 |
|
| 1999 |
Taleff EM, Nevland PJ. The high-temperature deformation and tensile ductility of al alloys Jom. 51: 34-36. DOI: 10.1007/S11837-999-0009-7 |
0.482 |
|
| 1999 |
Taleff EM. Elevated-temperature deformation mechanisms and tensile ductility Jom. 51: 33-33. DOI: 10.1007/S11837-999-0008-8 |
0.52 |
|
| 1998 |
Kim WJ, Taleff EM, Sherby OD. Superplasticity of fine-grained Fe-C alloys prepared by ingot-and powder-processing routes Journal of Materials Science. 33: 4977-4985. DOI: 10.1023/A:1004450806684 |
0.457 |
|
| 1998 |
Taleff EM, Henshall GA, Nieh TG, Lesuer DR, Wadsworth J. Warm-temperature tensile ductility in Al-Mg alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 29: 1081-1091. DOI: 10.1007/S11661-998-1017-X |
0.57 |
|
| 1996 |
Lesuer DR, Nieh TG, Syn CK, Taleff EM. Superplastic deformation in two microduplex stainless steels Materials Science Forum. 469-474. DOI: 10.4028/Www.Scientific.Net/Msf.243-245.469 |
0.449 |
|
| 1996 |
Taleff EM, Nagao M, Ashida Y, Sherby OD. Synthesis of submicrometer-grained-ultrahigh-carbon steel containing 10% aluminum by ball-milling of powders Journal of Materials Research. 11: 2725-2730. DOI: 10.1557/Jmr.1996.0345 |
0.358 |
|
| 1996 |
Taleff EM, Nagao M, Higashi K, Sherby OD. High-strain-rate superplasticity in ultrahigh-carbon steel containing 10 wt.% Al (UHCS-10Al) Scripta Materialia. 34: 1919-1923. DOI: 10.1016/1359-6462(96)00068-1 |
0.506 |
|
| 1996 |
Taleff EM, Lesuer DR, Wadsworth J. Enhanced ductility in coarse-grained Al-Mg alloys Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 27: 343-352. DOI: 10.1007/Bf02648411 |
0.557 |
|
| 1996 |
Taleff EM, Syn CK, Lesuer DR, Sherby OD. Pearlite in ultrahigh carbon steels: Heat treatments and mechanical properties Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 27: 111-118. DOI: 10.1007/Bf02647751 |
0.419 |
|
| 1995 |
Kim WJ, Taleff EM, Sherby OD. A proposed deformation mechanism for high strain-rate superplasticity Scripta Metallurgica Et Materialia. 32: 1625-1630. DOI: 10.1016/0956-716X(95)00246-R |
0.564 |
|
| 1994 |
Taleff EM, Sherby OD. Mechanical behavior of fine-grained Mg-6.5Li at elevated temperature Journal of Materials Research. 9: 1392-1396. DOI: 10.1557/Jmr.1994.1392 |
0.48 |
|
| 1992 |
Taleff EM, Ruano OA, Wolfenstine J, Sherby OD. Superplastic behavior of a fine-grained Mg–9Li material at low homologous temperature Journal of Materials Research. 7: 2131-2135. DOI: 10.1557/Jmr.1992.2131 |
0.369 |
|
| Show low-probability matches. |