☰

Philippe Bocher - Publications

Affiliations: 
Mechanical Engineering Ecole de Technologie Superieure (Canada) 
Area:
Mechanical Engineering, Materials Science Engineering, Aerospace Engineering
Tree Info Similar researchers PubMed Report error

142 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Chadha K, Tian Y, Bocher P, Spray JG, Aranas C. Microstructure Evolution, Mechanical Properties and Deformation Behavior of an Additively Manufactured Maraging Steel. Materials (Basel, Switzerland). 13. PMID 32455718 DOI: 10.3390/Ma13102380  0.429
2020 Vanderesse N, Texier D, Bocher P. Effect of porosities on brazed martensitic steel tensile properties: 2D and 3D pre-mortem vs post-mortem characterizations Materials Characterization. 160: 110084. DOI: 10.1016/J.Matchar.2019.110084  0.312
2020 Maurel P, Weiss L, Grosdidier T, Bocher P. How does surface integrity of nanostructured surfaces induced by severe plastic deformation influence fatigue behaviors of Al alloys with enhanced precipitation International Journal of Fatigue. 140: 105792. DOI: 10.1016/J.Ijfatigue.2020.105792  0.41
2020 Bretin R, Levesque M, Pilvin P, Bocher P. Neighborhood effect within polycrystalline materials: Elastoplastic micromechanical analysis by cellular automaton and finite element International Journal of Fatigue. 137: 105634. DOI: 10.1016/J.Ijfatigue.2020.105634  0.414
2020 Ajaja J, Jomaa W, Bocher P, Chromik R, Brochu M. High cycle fatigue behavior of hard turned 300 M ultra-high strength steel International Journal of Fatigue. 131: 105380. DOI: 10.1016/J.Ijfatigue.2019.105380  0.395
2020 Bag A, Delbergue D, Ajaja J, Bocher P, Lévesque M, Brochu M. Effect of different shot peening conditions on the fatigue life of 300 M steel submitted to high stress amplitudes International Journal of Fatigue. 130: 105274. DOI: 10.1016/J.Ijfatigue.2019.105274  0.416
2020 Toubal L, Chaabouni H, Bocher P, Jianqiang C. Monitoring fracture of high-strength steel under tensile and constant loading using acoustic emission analysis Engineering Failure Analysis. 108: 104260. DOI: 10.1016/J.Engfailanal.2019.104260  0.321
2020 Foroozmehr F, Bocher P. On the ductile rupture of 13% Cr-4% Ni martensitic stainless steels International Journal of Fracture. 224: 67-82. DOI: 10.1007/S10704-020-00446-2  0.442
2020 Jamshidinia M, Ghasemi‐Nanesa H, Bocher P, Nuño N, Poorganji B, Habibnejad-Korayem M. Microstructural Alteration of Alloyed Steel in Direct Metal Laser Melting by Powder Bed Deposition System Steel Research International. 1900667. DOI: 10.1002/Srin.201900667  0.308
2019 Delbergue D, Texier D, Lévesque M, Bocher P. Diffracting-grain identification from electron backscatter diffraction maps during residual stress measurements: a comparison between the sin2ψ and cosα methods Journal of Applied Crystallography. 52: 828-843. DOI: 10.1107/S1600576719008744  0.38
2019 Maurel P, Weiss L, Bocher P, Fleury E, Grosdidier T. Oxide dependent wear mechanisms of titanium against a steel counterface: Influence of SMAT nanostructured surface Wear. 245-255. DOI: 10.1016/J.Wear.2019.05.007  0.345
2019 Ebrahimi G, Momeni A, Ezatpour H, Jahazi M, Bocher P. Dynamic recrystallization in Monel400 Ni-Cu alloy: Mechanism and role of twinning Materials Science and Engineering: A. 744: 376-385. DOI: 10.1016/J.Msea.2018.12.045  0.301
2019 Bertrand R, Robe H, Texier D, Zedan Y, Feulvarch E, Bocher P. Analysis of AA2XXX/AA7XXX friction stir welds Journal of Materials Processing Technology. 271: 312-324. DOI: 10.1016/J.Jmatprotec.2019.03.027  0.366
2019 Bretin R, Levesque M, Bocher P. Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 2 – Cellular Automaton International Journal of Solids and Structures. 49-67. DOI: 10.1016/J.Ijsolstr.2019.07.005  0.439
2019 Bretin R, Levesque M, Bocher P. Neighborhood effect on the strain distribution in linearly elastic polycrystals: Part 1 – Finite element study of the interaction between grains International Journal of Solids and Structures. 36-48. DOI: 10.1016/J.Ijsolstr.2019.05.015  0.381
2019 Bag A, Delbergue D, Bocher P, Lévesque M, Brochu M. Statistical analysis of high cycle fatigue life and inclusion size distribution in shot peened 300M steel International Journal of Fatigue. 118: 126-138. DOI: 10.1016/J.Ijfatigue.2018.08.009  0.391
2019 Bianchetti C, Delbergue D, Bocher P, Lévesque M, Brochu M. Analytical fatigue life prediction of shot peened AA 7050-T7451 International Journal of Fatigue. 118: 271-281. DOI: 10.1016/J.Ijfatigue.2018.07.007  0.407
2019 Sun B, Ma Y, Vanderesse N, Varanasi RS, Song W, Bocher P, Ponge D, Raabe D. Macroscopic to nanoscopic in situ investigation on yielding mechanisms in ultrafine grained medium Mn steels: Role of the austenite-ferrite interface Acta Materialia. 178: 10-25. DOI: 10.1016/J.Actamat.2019.07.043  0.384
2019 Liu J, Vanderesse N, Stinville J, Pollock T, Bocher P, Texier D. In-plane and out-of-plane deformation at the sub-grain scale in polycrystalline materials assessed by confocal microscopy Acta Materialia. 169: 260-274. DOI: 10.1016/J.Actamat.2019.03.001  0.379
2019 Javadi H, Jomaa W, Songmene V, Brochu M, Bocher P. Inconel 718 Superalloy Controlled Surface Integrity for Fatigue Applications Produced by Precision Turning International Journal of Precision Engineering and Manufacturing. 20: 1297-1310. DOI: 10.1007/S12541-019-00145-6  0.433
2019 Touazine H, Chadha K, Jahazi M, Bocher P. Characterization of Subsurface Microstructural Alterations Induced by Hard Turning of Inconel 718 Journal of Materials Engineering and Performance. 28: 7016-7024. DOI: 10.1007/S11665-019-04416-1  0.388
2019 Tabiai I, Texier D, Bocher P, Therriault D, Levesque M. In-situ Full Field Out of Plane Displacement and Strain Measurements at the Micro-Scale in Single Reinforcement Composites under Transverse Load Experimental Mechanics. 60: 359-377. DOI: 10.1007/S11340-019-00541-Z  0.354
2019 Khalifa M, Barka N, Brousseau J, Bocher P. Optimization of the edge effect of 4340 steel specimen heated by induction process with flux concentrators using finite element axis-symmetric simulation and experimental validation The International Journal of Advanced Manufacturing Technology. 104: 4549-4557. DOI: 10.1007/S00170-019-04292-Y  0.638
2019 Ajaja J, Jomaa W, Bocher P, Chromik RR, Songmene V, Brochu M. Hard turning multi-performance optimization for improving the surface integrity of 300M ultra-high strength steel The International Journal of Advanced Manufacturing Technology. 104: 141-157. DOI: 10.1007/S00170-019-03863-3  0.412
2019 Khalifa M, Barka N, Brousseau J, Bocher P. Reduction of edge effect using response surface methodology and artificial neural network modeling of a spur gear treated by induction with flux concentrators The International Journal of Advanced Manufacturing Technology. 104: 103-117. DOI: 10.1007/S00170-019-03817-9  0.637
2018 Vanderesse N, Richter A, Nuño N, Bocher P. Measurement of deformation heterogeneities in additive manufactured lattice materials by Digital Image Correlation: Strain maps analysis and reliability assessment. Journal of the Mechanical Behavior of Biomedical Materials. 86: 397-408. PMID 30029167 DOI: 10.1016/J.Jmbbm.2018.07.010  0.304
2018 Hoa Ngan N, Bocher P. Finite Element Analysis Simulation of the Effect of Induction Hardening on Rolling Contact Fatigue Journal of Tribology. 140. DOI: 10.1115/1.4040305  0.428
2018 Wang W, Liu H, Zhu C, Bocher P, Liu H, Sun Z. Evaluation of Rolling Contact Fatigue of a Carburized Wind Turbine Gear Considering the Residual Stress and Hardness Gradient Journal of Tribology. 140. DOI: 10.1115/1.4040052  0.448
2018 Javadi H, Jomaa W, Dalgaard E, Brochu M, Bocher P. Influence of surface residual stresses on the fatigue life and crack propagation behavior of turned Inconel 718 super-alloy Matec Web of Conferences. 165: 18004. DOI: 10.1051/MATECCONF/201816518004  0.312
2018 Novelli M, Bocher P, Grosdidier T. Effect of cryogenic temperatures and processing parameters on gradient-structure of a stainless steel treated by ultrasonic surface mechanical attrition treatment Materials Characterization. 139: 197-207. DOI: 10.1016/J.Matchar.2018.02.028  0.446
2018 Masoumi Khalilabad M, Zedan Y, Texier D, Jahazi M, Bocher P. Effect of tool geometry and welding speed on mechanical properties of dissimilar AA2198–AA2024 FSWed joint Journal of Manufacturing Processes. 34: 86-95. DOI: 10.1016/J.Jmapro.2018.05.030  0.364
2018 Tu F, Delbergue D, Klotz T, Bag A, Miao H, Bianchetti C, Brochu M, Bocher P, Levesque M. Discrete element-periodic cell coupling model and investigations on shot stream expansion, Almen intensities and target materials International Journal of Mechanical Sciences. 145: 353-366. DOI: 10.1016/J.Ijmecsci.2018.06.023  0.441
2018 Liu H, Liu H, Bocher P, Zhu C, Sun Z. Effects of case hardening properties on the contact fatigue of a wind turbine gear pair International Journal of Mechanical Sciences. 141: 520-527. DOI: 10.1016/J.Ijmecsci.2018.04.010  0.435
2018 Texier D, Atmani F, Bocher P, Nadeau F, Chen J, Zedan Y, Vanderesse N, Demers V. Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation International Journal of Fatigue. 116: 220-233. DOI: 10.1016/J.Ijfatigue.2018.06.020  0.377
2018 Klotz T, Delbergue D, Bocher P, Lévesque M, Brochu M. Surface characteristics and fatigue behavior of shot peened Inconel 718 International Journal of Fatigue. 110: 10-21. DOI: 10.1016/J.Ijfatigue.2018.01.005  0.4
2018 Vanderesse N, Larregain B, Bridier F, Bocher P. Experimental Assessment of High Heating Rates in Induction Heating with Temperature-Sensitive Lacquers Journal of Materials Engineering and Performance. 27: 3831-3843. DOI: 10.1007/S11665-018-3499-Z  0.351
2018 Chen J, Demers V, Turner DP, Bocher P. Experimental Investigation on High-Cycle Fatigue of Inconel 625 Superalloy Brazed Joints Metallurgical and Materials Transactions A. 49: 1244-1253. DOI: 10.1007/S11661-018-4474-X  0.355
2018 Nazemi F, Hamel-Akré J, Bocher P. Modeling of cementite coarsening during tempering of low-alloyed-medium carbon steel Journal of Materials Science. 53: 6198-6218. DOI: 10.1007/S10853-017-1943-3  0.371
2018 Khalifa M, Barka N, Brousseau J, Bocher P. Sensitivity study of hardness profile of 4340 steel disc hardened by induction according to machine parameters and geometrical factors The International Journal of Advanced Manufacturing Technology. 101: 209-221. DOI: 10.1007/S00170-018-2892-Y  0.648
2017 Jomaa W, Songmene V, Bocher P, Gakwaya A. FEA-Based Comparative Investigation on High Speed Machining of Aluminum Alloys AA6061-T6 and AA7075-T651 Solid State Phenomena. 261: 347-353. DOI: 10.4028/Www.Scientific.Net/Ssp.261.347  0.468
2017 McMeekin K, Sirois F, Tousignant M, Bocher P. Improving the accuracy of time-harmonic FE simulations in induction heating applications Compel - the International Journal For Computation and Mathematics in Electrical and Electronic Engineering. 36: 526-534. DOI: 10.1108/Compel-05-2016-0203  0.368
2017 Jomaa W, Songmene V, Bocher P. Predictive analytical modeling of cutting forces generated by high-speed machining of ductile and hard metals Machining Science and Technology. 21: 335-361. DOI: 10.1080/10910344.2017.1283956  0.351
2017 Tu F, Delbergue D, Miao H, Klotz T, Brochu M, Bocher P, Levesque M. A sequential DEM-FEM coupling method for shot peening simulation Surface and Coatings Technology. 319: 200-212. DOI: 10.1016/J.Surfcoat.2017.03.035  0.413
2017 Sun B, Vanderesse N, Fazeli F, Scott C, Chen J, Bocher P, Jahazi M, Yue S. Discontinuous strain-induced martensite transformation related to the Portevin-Le Chatelier effect in a medium manganese steel Scripta Materialia. 133: 9-13. DOI: 10.1016/J.Scriptamat.2017.01.022  0.32
2017 Comot P, Bocher P, Belanger P. Ultrasonic guided wave inspection of Inconel 625 brazed lap joints: Simulation and experimentation Ndt & E International. 91: 71-78. DOI: 10.1016/J.Ndteint.2017.06.007  0.302
2017 Anderson M, Thielin AL, Bridier F, Bocher P, Savoie J. δ Phase precipitation in Inconel 718 and associated mechanical properties Materials Science and Engineering A. 679: 48-55. DOI: 10.1016/J.Msea.2016.09.114  0.368
2017 Meimandi S, Vanderesse N, Thibault D, Bocher P, Viens M. Macro-defects characterization in cast CA-6NM martensitic stainless steel Materials Characterization. 124: 31-39. DOI: 10.1016/J.Matchar.2016.11.040  0.353
2017 Foroozmehr F, Verreman Y, Chen J, Thibault D, Bocher P. Effect of inclusions on fracture behavior of cast and wrought 13% Cr-4% Ni martensitic stainless steels Engineering Fracture Mechanics. 175: 262-278. DOI: 10.1016/J.Engfracmech.2017.02.002  0.353
2017 Siredey-Schwaller N, Hamel-Akré J, Peltier L, Hazotte A, Bocher P. Solidification sequence of Ni-Si-Cr ~3wt% B brazing alloys Welding in the World. 61: 1253-1265. DOI: 10.1007/S40194-017-0503-4  0.343
2017 Stinville JC, Echlin MP, Callahan PG, Miller VM, Texier D, Bridier F, Bocher P, Pollock TM. Measurement of Strain Localization Resulting from Monotonic and Cyclic Loading at 650 ∘C in Nickel Base Superalloys Experimental Mechanics. 57: 1289-1309. DOI: 10.1007/S11340-017-0286-Y  0.338
2017 Touazine H, Akab J, Jahazi M, Tahan A, Jomaa W, Bocher P. Modeling of the microstructure alteration induced by hard turning of Inconel 718 The International Journal of Advanced Manufacturing Technology. 93: 3705-3712. DOI: 10.1007/S00170-017-0787-Y  0.419
2016 Javadi H, Jomaa W, Texier D, Brochu M, Bocher P. Surface Roughness Effects on the Fatigue Behavior of As-Machined Inconel718 Solid State Phenomena. 258: 306-309. DOI: 10.4028/Www.Scientific.Net/Ssp.258.306  0.4
2016 Jomaa W, Songmene V, Bocher P. An Investigation of Machining-Induced Residual Stresses and Microstructure of Induction-Hardened AISI 4340 Steel Materials and Manufacturing Processes. 31: 838-844. DOI: 10.1080/10426914.2015.1070431  0.467
2016 Texier D, Zedan Y, Amoros T, Feulvarch E, Stinville JC, Bocher P. Near-surface mechanical heterogeneities in a dissimilar aluminum alloys friction stir welded joint Materials and Design. 108: 217-229. DOI: 10.1016/J.Matdes.2016.06.091  0.364
2016 Vanderesse N, Ky I, Quevedo González F, Nuño N, Bocher P. Image analysis characterization of periodic porous materials produced by additive manufacturing Materials and Design. 92: 767-778. DOI: 10.1016/J.Matdes.2015.12.062  0.318
2016 Amrei MM, Monajati H, Thibault D, Verreman Y, Germain L, Bocher P. Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal Materials Characterization. 111: 128-136. DOI: 10.1016/J.Matchar.2015.11.022  0.372
2016 Giraud L, Robe H, Claudin C, Desrayaud C, Bocher P, Feulvarch E. Investigation into the dissimilar friction stir welding of AA7020-T651 and AA6060-T6 Journal of Materials Processing Technology. 235: 220-230. DOI: 10.1016/J.Jmatprotec.2016.04.020  0.358
2016 Aghasibeig M, Monajatizadeh H, Bocher P, Dolatabadi A, Wuthrich R, Moreau C. Cold spray as a novel method for development of nickel electrode coatings for hydrogen production International Journal of Hydrogen Energy. 41: 227-238. DOI: 10.1016/J.Ijhydene.2015.09.123  0.328
2016 Pourian MH, Bridier F, Pilvin P, Bocher P. Prediction of crack initiation sites in alpha Ti-alloys microstructures under dwell-fatigue using Cellular Automaton simulation method International Journal of Fatigue. 85: 85-97. DOI: 10.1016/J.Ijfatigue.2015.12.010  0.438
2016 Savaria V, Bridier F, Bocher P. Predicting the effects of material properties gradient and residual stresses on the bending fatigue strength of induction hardened aeronautical gears International Journal of Fatigue. 85: 70-84. DOI: 10.1016/J.Ijfatigue.2015.12.004  0.786
2016 Novelli M, Fundenberger JJ, Bocher P, Grosdidier T. On the effectiveness of surface severe plastic deformation by shot peening at cryogenic temperature Applied Surface Science. 389: 1169-1174. DOI: 10.1016/J.Apsusc.2016.08.009  0.369
2016 Amrei MM, Monajati H, Thibault D, Verreman Y, Bocher P. Effects of Various Post-Weld Heat Treatments on Austenite and Carbide Formation in a 13Cr4Ni Steel Multipass Weld Metallography, Microstructure, and Analysis. 5: 50-61. DOI: 10.1007/S13632-015-0251-Z  0.377
2016 Chen J, Demers V, Cadotte E, Turner D, Bocher P. Structural Performance of Inconel 625 Superalloy Brazed Joints Journal of Materials Engineering and Performance. 26: 547-553. DOI: 10.1007/S11665-016-2491-8  0.409
2016 Jomaa W, Songmene V, Bocher P. An Hybrid Approach Based on Machining and Dynamic Tests Data for the Identification of Material Constitutive Equations Journal of Materials Engineering and Performance. 1-18. DOI: 10.1007/S11665-016-1950-6  0.358
2016 Anderson M, Bridier F, Gholipour J, Jahazi M, Wanjara P, Bocher P, Savoie J. Mechanical and Metallurgical Evolution of Stainless Steel 321 in a Multi-step Forming Process Journal of Materials Engineering and Performance. 1-13. DOI: 10.1007/S11665-016-1928-4  0.412
2016 Stinville JC, Echlin MP, Texier D, Bridier F, Bocher P, Pollock TM. Sub-Grain Scale Digital Image Correlation by Electron Microscopy for Polycrystalline Materials during Elastic and Plastic Deformation Experimental Mechanics. 56: 197-216. DOI: 10.1007/S11340-015-0083-4  0.371
2016 Jomaa W, Lévesque J, Bocher P, Divialle A, Gakwaya A. Optimization study of dry peripheral milling process for improving aeronautical part integrity using Grey relational analysis The International Journal of Advanced Manufacturing Technology. 91: 931-942. DOI: 10.1007/S00170-016-9777-8  0.342
2016 Touazine H, Jahazi M, Bocher P. Accurate determination of damaged subsurface layers in machined Inconel 718 International Journal of Advanced Manufacturing Technology. 1-9. DOI: 10.1007/S00170-016-9039-9  0.322
2015 Vanderesse N, Anderson M, Bridier F, Bocher P. Inter- and intragranular delta phase quantitative characterization in Inconel 718 by means of image analysis. Journal of Microscopy. PMID 26372682 DOI: 10.1111/Jmi.12317  0.321
2015 Toubal L, Bocher P, Moreau A. Bimodal dwell-fatigue Weibull distribution of forged titanium IMI 834 International Journal of Damage Mechanics. 24: 629-645. DOI: 10.1177/1056789514541823  0.353
2015 Kamkar N, Bridier F, Jedrzejowski P, Bocher P. Water droplet impact erosion damage initiation in forged Ti-6Al-4V Wear. 322: 192-202. DOI: 10.1016/J.Wear.2014.10.020  0.328
2015 Robe H, Zedan Y, Chen J, Monajati H, Feulvarch E, Bocher P. Microstructural and mechanical characterization of a dissimilar friction stir welded butt joint made of AA2024-T3 and AA2198-T3 Materials Characterization. 110: 242-251. DOI: 10.1016/J.Matchar.2015.10.029  0.379
2015 Savaria V, Monajati H, Bridier F, Bocher P. Measurement and correction of residual stress gradients in aeronautical gears after various induction surface hardening treatments Journal of Materials Processing Technology. 220: 113-123. DOI: 10.1016/J.Jmatprotec.2014.12.009  0.791
2015 Stinville JC, Bridier F, Ponsen D, Wanjara P, Bocher P. High and low cycle fatigue behavior of linear friction welded Ti-6Al-4V International Journal of Fatigue. 70: 278-288. DOI: 10.1016/J.Ijfatigue.2014.10.002  0.404
2015 Hamid Pourian M, Pilvin P, Bridier F, Bocher P. Modeling the elastoplastic behaviors of alpha Ti-alloys microstructure using Cellular Automaton and finite element methods Computational Materials Science. 99: 33-42. DOI: 10.1016/J.Commatsci.2014.11.027  0.743
2015 Stinville JC, Vanderesse N, Bridier F, Bocher P, Pollock TM. High resolution mapping of strain localization near twin boundaries in a nickel-based superalloy Acta Materialia. 98: 29-42. DOI: 10.1016/J.Actamat.2015.07.016  0.335
2015 Paquin M, Thibault D, Bocher P, Lévesque JB, Verreman Y, Shinozaki K. Assessment of cold cracking tests for low transformation temperature martensitic stainless steel multipass welds Welding in the World. 59: 521-532. DOI: 10.1007/S40194-015-0227-2  0.386
2015 Mokhtabad Amrei M, Verreman Y, Bridier F, Thibault D, Bocher P. Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints Metallography, Microstructure, and Analysis. 4: 207-218. DOI: 10.1007/S13632-015-0202-8  0.37
2014 Jomaa W, Songmene V, Bocher P. Surface Finish and Residual Stresses Induced by Orthogonal Dry Machining of AA7075-T651. Materials (Basel, Switzerland). 7: 1603-1624. PMID 28788534 DOI: 10.3390/Ma7031603  0.406
2014 Hoseini M, Bocher P, Shahryari A, Azari F, Szpunar JA, Vali H. On the importance of crystallographic texture in the biocompatibility of titanium based substrate. Journal of Biomedical Materials Research. Part A. 102: 3631-8. PMID 24254817 DOI: 10.1002/Jbm.A.35028  0.354
2014 Savaria V, Bridier F, Bocher P. Measuring in-depth residual stress gradients: The challenge of induction hardened parts Materials Science Forum. 768: 158-165. DOI: 10.4028/Www.Scientific.Net/Msf.768-769.158  0.794
2014 Bridier F, Stinville JC, Vanderesse N, Villechaise P, Bocher P. Microscopic strain and crystal rotation measurement within metallurgical grains Key Engineering Materials. 592: 493-496. DOI: 10.4028/Www.Scientific.Net/Kem.592-593.493  0.325
2014 Touazine H, Jahazi M, Bocher P. Influence of hard turning on microstructure evolution in the subsurface layers of Inconel 718 Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 2. DOI: 10.1115/IMECE2014-37348  0.309
2014 Gagnon M, Tahan A, Bocher P, Thibault D. Influence of load spectrum assumptions on the expected reliability of hydroelectric turbines: A case study Structural Safety. 50: 1-8. DOI: 10.1016/J.Strusafe.2014.03.008  0.553
2014 Ruiz-Vargas J, Siredey-Schwaller N, Noyrez P, Mathieu S, Bocher P, Gey N. Potential and limitations of microanalysis SEM techniques to characterize borides in brazed Ni-based superalloys Materials Characterization. 94: 46-57. DOI: 10.1016/J.Matchar.2014.04.009  0.355
2014 Momeni A, Ebrahimi GR, Jahazi M, Bocher P. Microstructure evolution at the onset of discontinuous dynamic recrystallization: A physics-based model of subgrain critical size Journal of Alloys and Compounds. 587: 199-210. DOI: 10.1016/J.Jallcom.2013.10.180  0.367
2014 Pourian MH, Pilvin P, Bridier F, Bocher P. Heterogeneous elastic behavior of HCP titanium polycrystalline aggregates simulated by cellular automaton and finite element Computational Materials Science. 92: 468-475. DOI: 10.1016/J.Commatsci.2014.05.068  0.38
2014 Lapalme M, Hoseini M, Bocher P, Colle AR, Lévesque M. Realistic Cold Expansion Finite Element Model and Experimental Validations for Aluminium Alloys Experimental Mechanics. 54: 841-855. DOI: 10.1007/S11340-013-9844-0  0.47
2013 Barka N, Khelalfa AJ, Ouafi AE, Bocher P, Brousseau J. Effect of skin depth on hardness profile of gear heated by induction using 2D model Advanced Materials Research. 664: 884-890. DOI: 10.4028/Www.Scientific.Net/Amr.664.884  0.633
2013 Barka N, El Ouafi A, Bocher P, Brousseau J. Effects of material properties fornon-equilibrium conditions in induction heating process Advanced Materials Research. 664: 496-503. DOI: 10.4028/Www.Scientific.Net/Amr.664.496  0.63
2013 Barka N, El Ouafi A, Bocher P, Brousseau J. Explorative study and prediction of overtemperingregion of disc heated by induction process using 2D axisymmetric model and experimental tests Advanced Materials Research. 658: 259-265. DOI: 10.4028/Www.Scientific.Net/Amr.631-632.417  0.638
2013 Anderson M, Gholipour J, Bridier F, Bocher P, Jahazi M, Savoie J, Wanjara P. Improving the formability of stainless steel 321 through multistep deformation for hydroforming applications Transactions of the Canadian Society For Mechanical Engineering. 37: 39-52. DOI: 10.1139/Tcsme-2013-0003  0.434
2013 Kamkar N, Bridier F, Bocher P, Jedrzejowski P. Water droplet erosion mechanisms in rolled Ti-6Al-4V Wear. 301: 442-448. DOI: 10.1016/J.Wear.2013.01.005  0.332
2013 Gariépy A, Bridier F, Hoseini M, Bocher P, Perron C, Lévesque M. Experimental and numerical investigation of material heterogeneity in shot peened aluminium alloy AA2024-T351 Surface and Coatings Technology. 219: 15-30. DOI: 10.1016/J.Surfcoat.2012.12.046  0.438
2013 Gagnon M, Tahan A, Bocher P, Thibault D. On the fatigue reliability of hydroelectric Francis runners Procedia Engineering. 66: 565-574. DOI: 10.1016/J.Proeng.2013.12.108  0.559
2013 Yi J, Gharghouri M, Bocher P, Medraj M. Distortion and residual stress measurements of induction hardened AISI 4340 discs Materials Chemistry and Physics. 142: 248-258. DOI: 10.1016/J.Matchemphys.2013.07.012  0.445
2013 Moreau A, Toubal L, Bocher P, Humbert M, Uta E, Gey N. Evaluation of macrozone dimensions by ultrasound and EBSD techniques Materials Characterization. 75: 115-128. DOI: 10.1016/J.Matchar.2012.09.011  0.356
2013 Ruiz-Vargas J, Siredey-Schwaller N, Bocher P, Hazotte A. First melting stages during isothermal brazing, of Ni/BNi-2 couples Journal of Materials Processing Technology. 213: 2074-2080. DOI: 10.1016/J.Jmatprotec.2013.06.008  0.347
2013 Gariépy A, Larose S, Perron C, Bocher P, Lévesque M. On the effect of the orientation of sheet rolling direction in shot peen forming Journal of Materials Processing Technology. 213: 926-938. DOI: 10.1016/J.Jmatprotec.2013.01.003  0.477
2013 Ruiz-Vargas J, Siredey-Schwaller N, Gey N, Bocher P, Hazotte A. Microstructure development during isothermal brazing of Ni/BNi-2 couples Journal of Materials Processing Technology. 213: 20-29. DOI: 10.1016/J.Jmatprotec.2012.07.016  0.382
2013 Boutana N, Bocher P, Jahazi M. Discrepancy between fatigue and dwell-fatigue behavior of near alpha titanium alloys simulated by cellular automata International Journal of Fatigue. 51: 49-56. DOI: 10.1016/J.Ijfatigue.2012.09.012  0.42
2013 Gagnon M, Tahan A, Bocher P, Thibault D. A probabilistic model for the onset of High Cycle Fatigue (HCF) crack propagation: Application to hydroelectric turbine runner International Journal of Fatigue. 47: 300-307. DOI: 10.1016/J.Ijfatigue.2012.09.011  0.589
2013 Gariépy A, Larose S, Perron C, Bocher P, Lévesque M. On the effect of the peening trajectory in shot peen forming Finite Elements in Analysis and Design. 69: 48-61. DOI: 10.1016/J.Finel.2013.02.003  0.371
2013 Maldar AR, Ebrahimi GR, Haghshenas M, Jahazi M, Bocher P. Thermomechanical characterization of Mg-9Al-1Zn alloy using power dissipation maps Journal of Materials Engineering and Performance. 22: 3306-3314. DOI: 10.1007/S11665-013-0616-X  0.325
2013 Larregain B, Vanderesse N, Bridier F, Bocher P, Arkinson P. Method for accurate surface temperature measurements during fast induction heating Journal of Materials Engineering and Performance. 22: 1907-1913. DOI: 10.1007/S11665-013-0527-X  0.351
2013 Barka N, Bocher P, Brousseau J. Sensitivity study of hardness profile of 4340 specimen heated by induction process using axisymmetric modeling International Journal of Advanced Manufacturing Technology. 69: 2747-2756. DOI: 10.1007/S00170-013-5212-6  0.621
2013 Jomaa W, Songmene V, Bocher P. On residual stress changes after orthogonal machining of induction hardened AISI 4340 steel Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 1: 94-103.  0.327
2013 Kassab R, Champliaud H, Bocher P, Lanteigne J, Lê VN. Strain variations of AISI 4340 steel undergoing metallurgical transformations during induction hardening heat treatment Materials Science and Technology Conference and Exhibition 2013, Ms and T 2013. 2: 774-783.  0.302
2012 Hoseini M, Bocher P, Azari F, Vali H, Szpunar JA. Effects of grain size and texture on the biocompatibility of commercially pure titanium Materials Science Forum. 702: 822-825. DOI: 10.4028/Www.Scientific.Net/Msf.702-703.822  0.35
2012 Barka N, Bocher P, Brousseau J, Arkinson P. Effect of dimensional variation on induction process parameters using 2D simulation Advanced Materials Research. 409: 395-400. DOI: 10.4028/Www.Scientific.Net/Amr.409.395  0.636
2012 Barka N, Chebak A, Ouafi A, Bocher P, Brousseau J. Sensitivity study of temperature profile of 4340 spur gear heated by induction process using 3D model Applied Mechanics and Materials. 232: 736-741. DOI: 10.4028/Www.Scientific.Net/Amm.232.736  0.643
2012 Barka N, El Ouafi A, Chebak A, Bocher P, Brousseau J. Study of induction heating process applied to internal gear using 3D model Applied Mechanics and Materials. 232: 730-735. DOI: 10.4028/Www.Scientific.Net/Amm.232.730  0.611
2012 Gagnon M, Tahan A, Bocher P, Thibault D. On the stochastic simulation of hydroelectric turbine blades transient response Mechanical Systems and Signal Processing. 32: 178-187. DOI: 10.1016/J.Ymssp.2012.02.006  0.55
2012 Hoseini M, Hamid Pourian M, Bridier F, Vali H, Szpunar JA, Bocher P. Thermal stability and annealing behaviour of ultrafine grained commercially pure titanium Materials Science and Engineering A. 532: 58-63. DOI: 10.1016/J.Msea.2011.10.062  0.719
2012 Savaria V, Bridier F, Bocher P. Computational quantification and correction of the errors induced by layer removal for subsurface residual stress measurements International Journal of Mechanical Sciences. 64: 184-195. DOI: 10.1016/J.Ijmecsci.2012.07.003  0.767
2012 Gariépy A, Cyr J, Levers A, Perron C, Bocher P, Lévesque M. Potential applications of peen forming finite element modelling Advances in Engineering Software. 52: 60-71. DOI: 10.1016/J.Advengsoft.2012.06.006  0.335
2011 Savaria V, Hoseini M, Bridier F, Bocher P, Arkinson P. On the measurement of residual stress in induction hardened parts Materials Science Forum. 681: 431-436. DOI: 10.4028/Www.Scientific.Net/Msf.681.431  0.789
2011 Thibault D, Bocher P, Thomas M, Lanteigne J, Hovington P, Robichaud P. Reformed austenite transformation during fatigue crack propagation of 13%Cr-4%Ni stainless steel Materials Science and Engineering A. 528: 6519-6526. DOI: 10.1016/J.Msea.2011.04.089  0.356
2010 Thibault D, Bocher P, Thomas M, Gharghouri M, Côté M. Residual stress characterization in low transformation temperature 13%Cr-4%Ni stainless steel weld by neutron diffraction and the contour method Materials Science and Engineering A. 527: 6205-6210. DOI: 10.1016/J.Msea.2010.06.035  0.449
2010 Anderson M, Gholipour J, Bocher P, Bridier F, Savoie J, Wanjara P. Formability extension of aerospace alloys for tube hydroforming applications International Journal of Material Forming. 3: 303-306. DOI: 10.1007/S12289-010-0767-3  0.409
2010 Toubal L, Bocher P, Moreau A, Lévesque D. Macroregion size measurements in bimodal titanium forgings using two-dimensional autocorrelation method Metallurgical and Materials Transactions a: Physical Metallurgy and Materials Science. 41: 744-750. DOI: 10.1007/S11661-009-0128-3  0.381
2009 Uta E, Gey N, Bocher P, Humbert M, Gilgert J. Texture heterogeneities in αp/αs titanium forging analysed by EBSD-Relation to fatigue crack propagation Journal of Microscopy. 233: 451-459. DOI: 10.1111/J.1365-2818.2009.03141.X  0.338
2009 Thibault D, Bocher P, Thomas M. Residual stress and microstructure in welds of 13%Cr-4%Ni martensitic stainless steel Journal of Materials Processing Technology. 209: 2195-2202. DOI: 10.1016/J.Jmatprotec.2008.05.005  0.42
2009 Toubal L, Bocher P, Moreau A. Dwell-fatigue life dispersion of a near alpha titanium alloy International Journal of Fatigue. 31: 601-605. DOI: 10.1016/J.Ijfatigue.2008.09.010  0.36
2009 Humbert M, Moreau A, Uta E, Gey N, Bocher P, Bescond C. Analysis of backscattered ultrasound amplitude of Ti-5.8Al-4Sn-3.5Zr-0.7Nb-0.5Mo-0.3Si samples in terms of their microstructures and local textures Acta Materialia. 57: 708-714. DOI: 10.1016/J.Actamat.2008.10.012  0.333
2009 Hacini L, Van Lê N, Bocher P. Evaluation of residual stresses induced by robotized hammer peening by the contour method Experimental Mechanics. 49: 775-783. DOI: 10.1007/S11340-008-9205-6  0.441
2008 Boutana N, Bocher P, Jahazi M, Piot D, Montheillet F. The microstructural modelling of room temperature creep in titanium alloys using a cellular automata model International Journal of Microstructure and Materials Properties. 3: 642-653. DOI: 10.1504/Ijmmp.2008.022041  0.42
2008 Boutana N, Bocher P, Jahazi M, Piot D, Montheillet F. Microstructural modeling of cold creep/fatigue in near alpha titanium alloys using cellular automata method Transactions of the Canadian Society For Mechanical Engineering. 32: 195-213. DOI: 10.1139/Tcsme-2008-0013  0.431
2008 Hacini L, Van Lê N, Bocher P. Effect of impact energy on residual stresses induced by hammer peening of 304L plates Journal of Materials Processing Technology. 208: 542-548. DOI: 10.1016/J.Jmatprotec.2008.01.025  0.466
2008 Germain L, Gey N, Humbert M, Vo P, Jahazi M, Bocher P. Texture heterogeneities induced by subtransus processing of near α titanium alloys Acta Materialia. 56: 4298-4308. DOI: 10.1016/J.Actamat.2008.04.065  0.31
2007 Arafin MA, Medraj M, Turner DP, Bocher P. Mathematical modeling and experimental investigations of isothermal solidification during transient liquid phase bonding of nickel superalloys Advanced Materials Research. 15: 882-887. DOI: 10.4028/Www.Scientific.Net/Amr.15-17.882  0.363
2007 Barka N, Bocher P, Brousseau J, Galopin M, Sundararajan S. Modeling and sensitivity study of the induction hardening process Advanced Materials Research. 15: 525-530. DOI: 10.4028/Www.Scientific.Net/Amr.15-17.525  0.679
2007 Arafin MA, Medraj M, Turner DP, Bocher P. Transient liquid phase bonding of Inconel 718 and Inconel 625 with BNi-2: Modeling and experimental investigations Materials Science and Engineering A. 447: 125-133. DOI: 10.1016/J.Msea.2006.10.045  0.351
2007 Vo P, Jahazi M, Yue S, Bocher P. Flow stress prediction during hot working of near-α titanium alloys Materials Science and Engineering A. 447: 99-110. DOI: 10.1016/J.Msea.2006.10.032  0.422
2007 Arafin MA, Medraj M, Turner DP, Bocher P. Effect of alloying elements on the isothermal solidification during TLP bonding of SS 410 and SS 321 using a BNi-2 interlayer Materials Chemistry and Physics. 106: 109-119. DOI: 10.1016/J.Matchemphys.2007.05.049  0.343
2006 Humbert M, Germain L, Gey N, Bocher P, Jahazi M. Study of the variant selection in sharp textured regions of bimodal IMI 834 billet Materials Science and Engineering A. 430: 157-164. DOI: 10.1016/J.Msea.2006.05.047  0.317
2005 Bocher P, Jahazi M, Germain L, Wanjara P, Gey N, Humbert M. β Microtexture analysis in correlation with hcp textured regions observed in a forged near alpha titanium alloy Solid State Phenomena. 105: 127-132. DOI: 10.4028/Www.Scientific.Net/Ssp.105.127  0.318
2005 Khodabandeh AR, Jahazi M, Yue S, Bocher P. Impact toughness and tensile properties improvement through microstructure control in hot forged Nb-V microalloyed steel Isij International. 45: 272-280. DOI: 10.2355/Isijinternational.45.272  0.406
2005 Germain L, Gey N, Humbert M, Hazotte A, Bocher P, Jahazi M. An automated method to analyze separately the microtextures of primary αp grains and the secondary αs inherited colonies in bimodal titanium alloys Materials Characterization. 54: 216-222. DOI: 10.1016/J.Matchar.2004.11.011  0.344
2005 Germain L, Gey N, Humbert M, Bocher P, Jahazi M. Analysis of sharp microtexture heterogeneities in a bimodal IMI 834 billet Acta Materialia. 53: 3535-3543. DOI: 10.1016/J.Actamat.2005.03.043  0.316
2001 Girault E, Godet S, Jacques P, Bocher P, Verlinden B, Van Humbeeck J. Effect of hot-rolling in the austenitic region on the formation of isothermal bainite in a 0.4C-1.5Si-1.4Mn steel Le Journal De Physique Iv. 11: Pr8-217-Pr8-222. DOI: 10.1051/Jp4:2001837  0.373
1998 Bocher P, Azar J, Adams BL, Jonas JJ. Using Oim to Interpret the Dynamically Recrystallized Texture of a Low Stacking Fault Energy FCC Material Materials Science Forum. 249-254. DOI: 10.4028/Www.Scientific.Net/Msf.273-275.249  0.36
Show low-probability matches.