☰

Johnson Samuel, Ph.D. - Publications

Affiliations: 
2009 University of Illinois, Urbana-Champaign, Urbana-Champaign, IL 
Area:
Mechanical Engineering, Materials Science Engineering
Tree Info Similar researchers PubMed Report error

33 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2020 Samuel J, Jun MBG, Ozdoganlar OB, Honegger A, Vogler M, Kapoor SG. Micro/Meso-Scale Mechanical Machining 2020: A Two-Decade State-of-the-Field Review Journal of Manufacturing Science and Engineering-Transactions of the Asme. 142. DOI: 10.1115/1.4047621  0.312
2020 Nowak JF, Clippinger A, Samuel J. Freeform fabrication of fiber-reinforced hydrogels using direct-write far-field electrospinning Journal of Manufacturing Processes. 58: 955-963. DOI: 10.1016/J.Jmapro.2020.08.041  0.317
2018 Nowak JF, Samuel J. Quantifying machining outputs of pristine human teeth relevant to dental preparation procedures. Journal of the Mechanical Behavior of Biomedical Materials. 91: 1-9. PMID 30513366 DOI: 10.1016/J.Jmbbm.2018.11.008  0.362
2018 Williams A, Nowak JF, Dass R, Samuel J, Mills KL. Toward Morphologically Relevant Extracellular Matrix Models: 3D Fiber Reinforced Hydrogels. Frontiers in Physiology. 9: 966. PMID 30087619 DOI: 10.3389/Fphys.2018.00966  0.322
2018 Bradley C, Samuel J. Controlled Phase Interactions Between Pulsed Electric Fields, Ultrasonic Motion, and Magnetic Fields in an Anodic Dissolution Cell Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4038569  0.305
2018 Picha K, Samuel J. A model-based prediction of droplet shape evolution during additive manufacturing of aligned fiber-reinforced soft composites Journal of Manufacturing Processes. 32: 816-827. DOI: 10.1016/J.Jmapro.2018.03.012  0.382
2017 Spackman CC, Nowak JF, Mills KL, Samuel J. A Cohesive Zone Model for the Stamping Process Encountered During Three-Dimensional Printing of Fiber-Reinforced Soft Composites Journal of Manufacturing Science and Engineering. 140. DOI: 10.1115/1.4037603  0.385
2016 Conward M, Samuel J. Machining characteristics of the haversian and plexiform components of bovine cortical bone. Journal of the Mechanical Behavior of Biomedical Materials. 60: 525-534. PMID 27041629 DOI: 10.1016/J.Jmbbm.2016.03.017  0.356
2016 Chu B, Shi Y, Samuel J. Mitigation of chemical wear by graphene platelets during diamond cutting of steel Carbon. 108: 61-71. DOI: 10.1016/J.Carbon.2016.06.036  0.319
2016 Picha K, Spackman C, Samuel J. Droplet spreading characteristics observed during 3D printing of aligned fiber-reinforced soft composites Additive Manufacturing. 12: 121-131. DOI: 10.1016/J.Addma.2016.08.004  0.344
2016 Frank CR, Samuel J. Scalable production of polymer nanofiber-based ropes, cables, and coatings Journal of Applied Polymer Science. 133. DOI: 10.1002/App.43747  0.385
2015 Chu B, Singh E, Samuel J, Koratkar N. Graphene Oxide Colloidal Suspensions as Cutting Fluids for Micromachining—Part I: Fabrication and Performance Evaluation Journal of Micro and Nano-Manufacturing. 3. DOI: 10.1115/1.4031135  0.341
2015 Spackman CC, Picha KC, Gross GJ, Nowak JF, Smith PJ, Zheng J, Samuel J, Mishra S. A Novel Multimaterial Additive Manufacturing Technique for Fabricating Laminated Polymer Nanocomposite Structures Journal of Micro and Nano-Manufacturing. 3. DOI: 10.1115/1.4029263  0.415
2015 Chu B, Samuel J, Koratkar N. Micromilling Responses of Hierarchical Graphene Composites Journal of Manufacturing Science and Engineering. 137. DOI: 10.1115/1.4028480  0.429
2015 Jiang L, Nath C, Samuel J, Kapoor SG. An Enhanced Microstructure-Level Finite Element Machining Model for Carbon Nanotube-Polymer Composites Journal of Manufacturing Science and Engineering-Transactions of the Asme. 137: 21009. DOI: 10.1115/1.4028200  0.671
2015 Spackman CC, Frank CR, Picha KC, Samuel J. 3D printing of fiber-reinforced soft composites: Process study and material characterization Journal of Manufacturing Processes. DOI: 10.1016/J.Jmapro.2016.04.006  0.391
2015 Smith PJ, Chu B, Singh E, Chow P, Samuel J, Koratkar N. Graphene oxide colloidal suspensions mitigate carbon diffusion during diamond turning of steel Journal of Manufacturing Processes. 17: 41-47. DOI: 10.1016/J.Jmapro.2014.10.007  0.418
2014 Jiang L, Nath C, Samuel J, Kapoor SG. An enhanced microstructure-level finite element machining model for carbon nanotube (CNT)-polymer composites Asme 2014 International Manufacturing Science and Engineering Conference, Msec 2014 Collocated With the Jsme 2014 International Conference On Materials and Processing and the 42nd North American Manufacturing Research Conference. 2. DOI: 10.1115/MSEC2014-3925  0.584
2014 Carter W, Popell GC, Samuel J, Mishra S. A Fundamental Study and Modeling of the Micro-Droplet Formation Process in Near-Field Electrohydrodynamic Jet Printing Journal of Micro and Nano-Manufacturing. 2: 21005. DOI: 10.1115/1.4027099  0.318
2014 Jiang L, Nath C, Samuel J, Kapoor SG. Estimating the cohesive zone model parameters of carbon nanotube-polymer interface for machining simulations Journal of Manufacturing Science and Engineering, Transactions of the Asme. 136. DOI: 10.1115/1.4024941  0.632
2013 Chu B, Singh E, Koratkar N, Samuel J. Graphene-enhanced environmentally-benign cutting fluids for high-performance micro-machining applications. Journal of Nanoscience and Nanotechnology. 13: 5500-4. PMID 23882785 DOI: 10.1166/Jnn.2013.7538  0.359
2013 Arora I, Samuel J, Koratkar N. Experimental investigation of the machinability of epoxy reinforced with graphene platelets Journal of Manufacturing Science and Engineering, Transactions of the Asme. 135. DOI: 10.1115/1.4024814  0.332
2013 Ghai I, Samuel J, DeVor RE, Kapoor SG. Analysis of Droplet Spreading on a Rotating Surface and the Prediction of Cooling and Lubrication Performance of an Atomization-Based Cutting Fluid System Journal of Manufacturing Science and Engineering-Transactions of the Asme. 135: 31003. DOI: 10.1115/1.4024153  0.534
2012 Jiang L, Nath C, Samuel J, Kapoor SG. Estimating the cohesive zone model parameters for carbon nanotube-polymer interface using inverse finite element approach Asme 2012 International Manufacturing Science and Engineering Conference Collocated With the 40th North American Manufacturing Research Conference and in Participation With the Int. Conf., Msec 2012. 907-916. DOI: 10.1115/MSEC2012-7400  0.568
2011 Calzada KA, Kapoor SG, DeVor RE, Samuel J, Srivastava AK. Modeling and interpretation of fiber orientation-based failure mechanisms in machining of carbon fiber-reinforced polymer composites Transactions of the North American Manufacturing Research Institution of Sme. 39: 332-341. DOI: 10.1016/J.Jmapro.2011.09.005  0.624
2010 Samuel J, Kapoor SG, DeVor RE, Hsia KJ. Effect of microstructural parameters on the machinability of aligned carbon nanotube composites Journal of Manufacturing Science and Engineering-Transactions of the Asme. 132: 51012. DOI: 10.1115/1.4002495  0.66
2010 Ghai I, Wentz J, DeVor RE, Kapoor SG, Samuel J. Droplet behavior on a rotating surface for atomization-based cutting fluid application in micromachining Journal of Manufacturing Science and Engineering, Transactions of the Asme. 132: 0110171-01101710. DOI: 10.1115/1.4000859  0.65
2009 Kapoor SG, DeVor RE, Samuel J. Carbon nanotube composites for the micro-world: Design for functionality and manufacturability International Conferences On Multi-Material Micro Manufacture, 4m/International Conferences On Micro Manufacturing, Icomm. 37-46. DOI: 10.1243/17547164C0012009005  0.63
2009 Samuel J, Dikshit A, DeVor RE, Kapoor SG, Hsia KJ. Effect of carbon nanotube (CNT) loading on the thermomechanical properties and the machinability of CNT-reinforced polymer composites Journal of Manufacturing Science and Engineering, Transactions of the Asme. 131: 0310081-0310089. DOI: 10.1115/1.3123337  0.645
2008 Dikshit A, Samuel J, DeVor RE, Kapoor SG. Microstructure-level machining simulation of carbon nanotube reinforced polymer composites - Part II: Model interpretation and application Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311151-0311158. DOI: 10.1115/1.2927431  0.673
2008 Dikshit A, Samuel J, DeVor RE, Kapoor SG. A microstructure-level material model for simulating the machining of carbon nanotube reinforced polymer composites Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311101-0311108. DOI: 10.1115/1.2917564  0.624
2008 Dikshit A, Samuel J, DeVor RE, Kapoor SG. Microstructure-level machining simulation of carbon nanotube reinforced polymer composites - part I: Model development and validation Journal of Manufacturing Science and Engineering, Transactions of the Asme. 130: 0311141-0311148. DOI: 10.1115/1.2917378  0.655
2006 Samuel J, DeVor RE, Kapoor SG, Hsia KJ. Experimental investigation of the machinability of polycarbonate reinforced with multiwalled carbon nanotubes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 128: 465-473. DOI: 10.1115/1.2137753  0.658
Show low-probability matches.