Year |
Citation |
Score |
2020 |
Naumenko K, Gariboldi E, Nizinkovskyi R. Stress-regime-dependence of inelastic anisotropy in forged age-hardening aluminium alloys at elevated temperature: Constitutive modeling, identification and validation Mechanics of Materials. 141: 103262. DOI: 10.1016/J.Mechmat.2019.103262 |
0.463 |
|
2019 |
Nordmann J, Naumenko K, Altenbach H. A Damage Mechanics Based Cohesive Zone Model with Damage Gradient Extension for Creep-Fatigue-Interaction Key Engineering Materials. 794: 253-259. DOI: 10.4028/Www.Scientific.Net/Kem.794.253 |
0.528 |
|
2019 |
Krüger M, Kauss O, Naumenko K, Burmeister C, Wessel E, Schmelzer J. The potential of mechanical alloying to improve the strength and ductility of Mo–9Si–8B–1Zr alloys – experiments and simulation Intermetallics. 113: 106558. DOI: 10.1016/J.Intermet.2019.106558 |
0.338 |
|
2019 |
Bagheri B, Schulze S, Naumenko K, Altenbach H. Identification of traction-separation curves for self-adhesive polymeric films based on non-linear theory of beams and digital images of T-peeling Composite Structures. 216: 222-227. DOI: 10.1016/J.Compstruct.2019.02.060 |
0.525 |
|
2019 |
Kauss O, Tsybenko H, Naumenko K, Hütter S, Krüger M. Structural analysis of gas turbine blades made of Mo-Si-B under transient thermo-mechanical loads Computational Materials Science. 165: 129-136. DOI: 10.1016/J.Commatsci.2019.04.023 |
0.348 |
|
2019 |
Javanbakht Z, Aßmus M, Naumenko K, Öchsner A, Altenbach H. On thermal strains and residual stresses in the linear theory of anti‐sandwiches Zamm-Zeitschrift Fur Angewandte Mathematik Und Mechanik. 99. DOI: 10.1002/Zamm.201900062 |
0.577 |
|
2019 |
Eisenträger J, Naumenko K, Kostenko Y, Altenbach H. Thermo‐Mechanical Analysis of a Steam Turbine rotor Pamm. 19. DOI: 10.1002/Pamm.201900361 |
0.455 |
|
2018 |
Nordmann J, Thiem P, Cinca N, Naumenko K, Krüger M. Analysis of iron aluminide coated beams under creep conditions in high-temperature four-point bending tests: Journal of Strain Analysis For Engineering Design. 53: 255-265. DOI: 10.1177/0309324718761305 |
0.341 |
|
2018 |
Eisenträger J, Naumenko K, Altenbach H. Calibration of a phase mixture model for hardening and softening regimes in tempered martensitic steel over wide stress and temperature ranges Journal of Strain Analysis For Engineering Design. 53: 156-177. DOI: 10.1177/0309324718755956 |
0.55 |
|
2018 |
Rößler C, Schmicker D, Naumenko K, Woschke E. Adaption of a Carreau fluid law formulation for residual stress determination in rotary friction welds Journal of Materials Processing Technology. 252: 567-572. DOI: 10.1016/J.Jmatprotec.2017.10.018 |
0.4 |
|
2018 |
Haghi M, Aßmus M, Naumenko K, Altenbach H. Mechanical Models and Finite-Element Approaches for the Structural Analysis of Photovoltaic Composite Structures: a Comparative Study Mechanics of Composite Materials. 54: 415-430. DOI: 10.1007/S11029-018-9752-6 |
0.56 |
|
2018 |
Altenbach H, Konkin V, Lavinsky D, Morachkovsky O, Naumenko K. Verformungsanalyse elektrisch leitender metallischer Bauteile bei Magnetimpulsbearbeitung Forschung Im Ingenieurwesen-Engineering Research. 82: 371-377. DOI: 10.1007/S10010-018-0285-X |
0.489 |
|
2018 |
Eisenträger J, Naumenko K, Altenbach H. Numerical implementation of a phase mixture model for rate-dependent inelasticity of tempered martensitic steels Acta Mechanica. 229: 3051-3068. DOI: 10.1007/S00707-018-2151-1 |
0.608 |
|
2018 |
Chowdhury H, Naumenko K, Altenbach H, Krüger M. Critical stresses estimation by crystal viscoplasticity modeling of rate-dependent anisotropy of Al-rich TiAl alloys at high temperature Archive of Applied Mechanics. 88: 65-81. DOI: 10.1007/S00419-017-1291-4 |
0.589 |
|
2018 |
Eisenträger J, Naumenko K, Altenbach H. Implementation of a Phase Mixture Model for Rate‐Dependent Inelasticity Pamm. 18. DOI: 10.1002/Pamm.201800200 |
0.48 |
|
2017 |
Chowdhury H, Altenbach H, Krüger M, Naumenko K. Reviewing the Class of Al-rich Ti-Al Alloys: Modeling High Temperature Plastic Anisotropy and Asymmetry Mechanics of Advanced Materials and Modern Processes. 3: 16. DOI: 10.1186/S40759-017-0031-3 |
0.522 |
|
2017 |
Eisenträger J, Naumenko K, Altenbach H, Gariboldi E. Analysis of temperature and strain rate dependencies of softening regime for tempered martensitic steel Journal of Strain Analysis For Engineering Design. 52: 226-238. DOI: 10.1177/0309324717699746 |
0.525 |
|
2017 |
Chowdhury H, Naumenko K, Altenbach H, Krüger M. Rate dependent tension-compression-asymmetry of Ti-61.8at%Al alloy with long period superstructures at 1050 °C Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 700: 503-511. DOI: 10.1016/J.Msea.2017.06.041 |
0.58 |
|
2017 |
Chowdhury H, Naumenko K, Altenbach H. Aspects of power law flow rules in crystal plasticity with glide-climb driven hardening and recovery International Journal of Mechanical Sciences. 486-496. DOI: 10.1016/J.Ijmecsci.2017.06.019 |
0.581 |
|
2017 |
Naumenko K, Eremeyev VA. A layer-wise theory of shallow shells with thin soft core for laminated glass and photovoltaic applications Composite Structures. 178: 434-446. DOI: 10.1016/J.Compstruct.2017.07.007 |
0.364 |
|
2017 |
Aßmus M, Nordmann J, Naumenko K, Altenbach H. A homogeneous substitute material for the core layer of photovoltaic composite structures Composites Part B-Engineering. 112: 353-372. DOI: 10.1016/J.Compositesb.2016.12.042 |
0.553 |
|
2017 |
Aßmus M, Naumenko K, Altenbach H. Mechanical behaviour of photovoltaic composite structures: Influence of geometric dimensions and material properties on the eigenfrequencies of mechanical vibrations Composites Communications. 6: 59-62. DOI: 10.1016/J.Coco.2017.10.003 |
0.535 |
|
2017 |
Aßmus M, Bergmann S, Naumenko K, Altenbach H. Mechanical behaviour of photovoltaic composite structures: A parameter study on the influence of geometric dimensions and material properties under static loading Composites Communications. 5: 23-26. DOI: 10.1016/J.Coco.2017.06.003 |
0.555 |
|
2017 |
Joedecke P, Guentsch A, Naumenko K, Weber C. Three-dimensional finite element modeling of dental restorative procedures using various digitization methods Pamm. 17: 195-196. DOI: 10.1002/Pamm.201710067 |
0.306 |
|
2016 |
Chowdhury H, Altenbach H, Naumenko K. On the Choice of the Power Law Flow Rule and its Consequences in Crystal Plasticity Key Engineering Materials. 725: 359-365. DOI: 10.4028/Www.Scientific.Net/Kem.725.359 |
0.55 |
|
2016 |
Gariboldi E, Naumenko K, Ozhoga-Maslovskaja O, Zappa E. Analysis of anisotropic damage in forged Al–Cu–Mg–Si alloy based on creep tests, micrographs of fractured specimen and digital image correlations Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 652: 175-185. DOI: 10.1016/J.Msea.2015.11.090 |
0.374 |
|
2016 |
Nase M, Rennert M, Naumenko K, Eremeyev VA. Identifying traction–separation behavior of self-adhesive polymeric films from in situ digital images under T-peeling Journal of the Mechanics and Physics of Solids. 91: 40-55. DOI: 10.1016/J.Jmps.2016.03.001 |
0.311 |
|
2016 |
Aßmus M, Naumenko K, Altenbach H. A multiscale projection approach for the coupled global–local structural analysis of photovoltaic modules Composite Structures. 158: 340-358. DOI: 10.1016/J.Compstruct.2016.09.036 |
0.56 |
|
2016 |
Altenbach H, Morachkovsky O, Naumenko K, Lavinsky D. Inelastic deformation of conductive bodies in electromagnetic fields Continuum Mechanics and Thermodynamics. 28: 1421-1433. DOI: 10.1007/S00161-015-0484-8 |
0.543 |
|
2015 |
Altenbach H, Laengler F, Naumenko K, Ievdokymov M. Analysis of Casting Materials under Thermal Fatigue Applied Mechanics and Materials. 784: 95-103. DOI: 10.4028/Www.Scientific.Net/Amm.784.95 |
0.61 |
|
2015 |
Schmicker D, Paczulla S, Nitzschke S, Groschopp S, Naumenko K, Jüttner S, Strackeljan J. Experimental identification of flow properties of a S355 structural steel for hot deformation processes Journal of Strain Analysis For Engineering Design. 50: 75-83. DOI: 10.1177/0309324714559139 |
0.417 |
|
2015 |
Eremeyev VA, Naumenko K. A relationship between effective work of adhesion and peel force for thin hyperelastic films undergoing large deformation Mechanics Research Communications. 69: 24-26. DOI: 10.1016/J.Mechrescom.2015.06.001 |
0.311 |
|
2015 |
Eisenträger J, Naumenko K, Altenbach H, Köppe H. Application of the first-order shear deformation theory to the analysis of laminated glasses and photovoltaic panels International Journal of Mechanical Sciences. 96: 163-171. DOI: 10.1016/J.Ijmecsci.2015.03.012 |
0.585 |
|
2015 |
Eisenträger J, Naumenko K, Altenbach H, Meenen J. A user-defined finite element for laminated glass panels and photovoltaic modules based on a layer-wise theory Composite Structures. 133: 265-277. DOI: 10.1016/J.Compstruct.2015.07.049 |
0.554 |
|
2015 |
Ozhoga-Maslovskaja O, Naumenko K, Altenbach H, Prygorniev O. Micromechanical simulation of grain boundary cavitation in copper considering non-proportional loading Computational Materials Science. 96: 178-184. DOI: 10.1016/J.Commatsci.2014.08.050 |
0.531 |
|
2015 |
Altenbach H, Naumenko K, L’Vov G, Sukiasov V, Podgorny A. Prediction of accumulation of technological stresses in a pipeline upon its repair by a composite band Mechanics of Composite Materials. 51: 139-156. DOI: 10.1007/S11029-015-9485-8 |
0.539 |
|
2015 |
Altenbach H, Eremeyev VA, Naumenko K. On the use of the first order shear deformation plate theory for the analysis of three-layer plates with thin soft core layer Zamm Zeitschrift Fur Angewandte Mathematik Und Mechanik. 95: 1004-1011. DOI: 10.1002/Zamm.201500069 |
0.545 |
|
2014 |
Lvov I, Naumenko K, Altenbach H. Homogenisation approach in analysis of creep behaviour in multipass weld Materials Science and Technology (United Kingdom). 30: 50-53. DOI: 10.1179/1743284713Y.0000000250 |
0.541 |
|
2014 |
Längler F, Naumenko K, Altenbach H, Ievdokymov M. A constitutive model for inelastic behavior of casting materials under thermo-mechanical loading Journal of Strain Analysis For Engineering Design. 49: 421-428. DOI: 10.1177/0309324714522034 |
0.597 |
|
2014 |
Naumenko K, Gariboldi E. A phase mixture model for anisotropic creep of forged Al-Cu-Mg-Si alloy Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 618: 368-376. DOI: 10.1016/J.Msea.2014.09.012 |
0.451 |
|
2014 |
Naumenko K, Eremeyev VA. A layer-wise theory for laminated glass and photovoltaic panels Composite Structures. 112: 283-291. DOI: 10.1016/J.Compstruct.2014.02.009 |
0.345 |
|
2014 |
Altenbach H, Beschetnikov DA, Lvov GI, Naumenko K, Sukiasov VG. Contact interaction of a pipe with the repair wrap from a composite material Forschung Im Ingenieurwesen/Engineering Research. 78: 59-67. DOI: 10.1007/S10010-014-0173-Y |
0.555 |
|
2013 |
Altenbach H, Kozhar S, Naumenko K. Modeling creep damage of an aluminum-silicon eutectic alloy International Journal of Damage Mechanics. 22: 683-698. DOI: 10.1177/1056789512462428 |
0.583 |
|
2013 |
Weps M, Naumenko K, Altenbach H. Unsymmetric three-layer laminate with soft core for photovoltaic modules Composite Structures. 105: 332-339. DOI: 10.1016/J.Compstruct.2013.05.029 |
0.538 |
|
2013 |
Schmicker D, Naumenko K, Strackeljan J. A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model Computer Methods in Applied Mechanics and Engineering. 265: 186-194. DOI: 10.1016/J.Cma.2013.06.007 |
0.383 |
|
2013 |
Eisenträger J, Naumenko K, Altenbach H, Lenz W. Approximative methods to calculate notch stresses and strains for plasticity and creep | Näherungsverfahren zur Berechnung von Kerbspannungen und -dehnungen bei Plastizität und Kriechen Forschung Im Ingenieurwesen/Engineering Research. 77: 71-80. DOI: 10.1007/S10010-013-0166-2 |
0.549 |
|
2013 |
Prygorniev O, Naumenko K, Altenbach H. Polycrystal vs. Classical Continuum Models for Structures Pamm. 13: 255-256. DOI: 10.1002/Pamm.201310123 |
0.584 |
|
2012 |
Schulze SH, Pander M, Naumenko K, Altenbach H. Analysis of laminated glass beams for photovoltaic applications International Journal of Solids and Structures. 49: 2027-2036. DOI: 10.1016/J.Ijsolstr.2012.03.028 |
0.545 |
|
2012 |
Ozhoga‐Maslovskaja O, Altenbach H, Naumenko K, Prygorniev O. Creep damage modeling of a polycrystalline material Pamm. 12: 145-146. DOI: 10.1002/Pamm.201210063 |
0.558 |
|
2011 |
Naumenko K, Altenbach H, Kutschke A. Inelastic analysis versus simplified rules for stress concentration fields under variable loading and high temperature Materials Research Innovations. 15. DOI: 10.1179/143307511X12858957673275 |
0.597 |
|
2011 |
Naumenko K, Altenbach H, Kutschke A. A combined model for hardening, softening, and damage processes in advanced heat resistant steels at elevated temperature International Journal of Damage Mechanics. 20: 578-597. DOI: 10.1177/1056789510386851 |
0.622 |
|
2011 |
Naumenko K, Kutschke A, Kostenko Y, Rudolf T. Multi-axial thermo-mechanical analysis of power plant components from 9-12%Cr steels at high temperature Engineering Fracture Mechanics. 78: 1657-1668. DOI: 10.1016/J.Engfracmech.2010.12.002 |
0.404 |
|
2011 |
Altenbach H, Eremeyev VA, Kutschke A, Naumenko K. Conservation laws and prediction methods for stress concentration fields Acta Mechanica. 218: 349-355. DOI: 10.1007/S00707-010-0425-3 |
0.562 |
|
2011 |
Ozhoga-Maslovskaja O, Altenbach H, Naumenko K, Prygorniev O, Vodka O. Micromechanical creep model for pure copper Pamm. 11: 419-420. DOI: 10.1002/Pamm.201110201 |
0.598 |
|
2011 |
Renner B, Altenbach H, Naumenko K. Rotation of an axisymmetric particle in a plane flow Pamm. 11: 333-334. DOI: 10.1002/Pamm.201110158 |
0.5 |
|
2009 |
Naumenko K, Kostenko Y. Structural analysis of a power plant component using a stress-range-dependent creep-damage constitutive model Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 510: 169-174. DOI: 10.1016/J.Msea.2008.04.096 |
0.445 |
|
2009 |
Kröner C, Altenbach H, Naumenko K. Coupling of a structural analysis and flow simulation for short-fiber-reinforced polymers: Property prediction and transfer of results Mechanics of Composite Materials. 45: 249-256. DOI: 10.1007/S11029-009-9086-5 |
0.561 |
|
2009 |
Naumenko K, Altenbach H, Gorash Y. Creep analysis with a stress range dependent constitutive model Archive of Applied Mechanics. 79: 619-630. DOI: 10.1007/S00419-008-0287-5 |
0.585 |
|
2009 |
Altenbach H, Brigadnov IA, Naumenko K. Rotation of a slender particle in a shear flow: Influence of the rotary inertia and stability analysis Zamm Zeitschrift Fur Angewandte Mathematik Und Mechanik. 89: 823-832. DOI: 10.1002/Zamm.200900249 |
0.506 |
|
2008 |
Altenbach H, Naumenko K, Gorash Y. Creep Analysis For A Wide Stress Range Based On Stress Relaxation Experiments International Journal of Modern Physics B. 22: 5413-5418. DOI: 10.1142/S0217979208050589 |
0.582 |
|
2008 |
Sukiasov V, Altenbach H, Naumenko K. Analytical approximative solution of the viscoelastic deformation problem of thin-walled structural elements Forschung Im Ingenieurwesen/Engineering Research. 72: 183-191. DOI: 10.1007/S10010-008-0081-0 |
0.588 |
|
2008 |
Altenbach H, Gorash Y, Naumenko K. Steady-state creep of a pressurized thick cylinder in both the linear and the power law ranges Acta Mechanica. 195: 263-274. DOI: 10.1007/S00707-007-0546-5 |
0.603 |
|
2008 |
Gorash Y, Altenbach H, Naumenko K. Modeling of primary and secondary creep for a wide stress range Pamm. 8: 10207-10208. DOI: 10.1002/Pamm.200810207 |
0.591 |
|
2007 |
Altenbach H, Naumenko K. Long Term Creep Analysis of Pipe Bends in a Steam Transfer Line at Elevated Temperature Key Engineering Materials. 795-802. DOI: 10.4028/Www.Scientific.Net/Kem.340-341.795 |
0.485 |
|
2007 |
Altenbach H, Naumenko K, Pylypenko S, Renner B. Influence of rotary inertia on the fiber dynamics in homogeneous creeping flows Zamm Zeitschrift Fur Angewandte Mathematik Und Mechanik. 87: 81-93. DOI: 10.1002/Zamm.200610303 |
0.499 |
|
2007 |
Altenbach H, Naumenko K, Gorash Y. Numerical benchmarks for creep-damage modeling Pamm. 7: 4040021-4040022. DOI: 10.1002/Pamm.200700325 |
0.622 |
|
2006 |
Shutov AV, Altenbach H, Naumenko K. Steady-state creep analysis of pressurized pipe weldments by perturbation method International Journal of Solids and Structures. 43: 6908-6920. DOI: 10.1016/J.Ijsolstr.2006.02.013 |
0.58 |
|
2006 |
Altenbach H, Naumenko K, Zhilin PA. A note on transversely-isotropic invariants Zamm Zeitschrift Fur Angewandte Mathematik Und Mechanik. 86: 162-168. DOI: 10.1002/Zamm.200510227 |
0.499 |
|
2006 |
Altenbach H, Naumenko K, Pylypenko S, Renner B. Ausrichtung von Partikeln in stationären Strömungsfeldern Pamm. 6: 423-424. DOI: 10.1002/Pamm.200610192 |
0.479 |
|
2005 |
Naumenko K, Altenbach H. A phenomenological model for anisotropic creep in a multipass weld metal Archive of Applied Mechanics. 74: 808-819. DOI: 10.1007/S00419-005-0409-2 |
0.577 |
|
2004 |
Naumenko K, Altenbach H. Ein phänomenologisches Modell für anisotropes Kriechen in Schweißnähten Pamm. 4: 227-228. DOI: 10.1002/Pamm.200410095 |
0.502 |
|
2003 |
Altenbach H, Naumenko K, L'vov GI, Pilipenko SN. Numerical estimation of the elastic properties of thin-walled structures manufactured from short-fiber-reinforced thermoplastics Mechanics of Composite Materials. 39: 221-234. DOI: 10.1023/A:1024566026411 |
0.608 |
|
2003 |
Altenbach H, Naumenko K, Zhilin PA. A micro-polar theory for binary media with application to phase-transitional flow of fiber suspensions Continuum Mechanics and Thermodynamics. 15: 539-570. DOI: 10.1007/S00161-003-0133-5 |
0.55 |
|
2003 |
Altenbach H, Dyogtyev O, Naumenko K, Zhilin P. Ein mikro‐polares Modell für Fasersuspensionsströmungen und dessen erste numerische Abschätzung Pamm. 3: 212-213. DOI: 10.1002/Pamm.200310380 |
0.498 |
|
2002 |
Altenbach H, Naumenko K. Shear Correction Factors in Creep-Damage Analysis of Beams, Plates and Shells Jsme International Journal Series a-Solid Mechanics and Material Engineering. 45: 77-83. DOI: 10.1299/Jsmea.45.77 |
0.609 |
|
2002 |
Altenbach H, Huang C, Naumenko K. Creep-damage predictions in thin-walled structures by use of isotropic and anisotropic damage models: Journal of Strain Analysis For Engineering Design. 37: 265-275. DOI: 10.1243/0309324021515023 |
0.603 |
|
2001 |
Altenbach H, Kushnevsky V, Naumenko K. On the use of solid- and shell-type finite elements in creep-damage predictions of thinwalled structures Archive of Applied Mechanics. 71: 164-181. DOI: 10.1007/S004190000132 |
0.631 |
|
2001 |
Naumenko K, Altenbach J, Altenbach H, Naumenko VK. Closed and approximate analytical solutions for rectangular Mindlin plates Acta Mechanica. 147: 153-172. DOI: 10.1007/Bf01182359 |
0.553 |
|
2000 |
Altenbach H, Breslavsky D, Morachkovsky O, Naumenko K. Cyclic creep damage in thin-walled structures Journal of Strain Analysis For Engineering Design. 35: 1-11. DOI: 10.1177/030932470003500101 |
0.599 |
|
2000 |
Altenbach H, Kolarow G, Morachkovsky OK, Naumenko K. On the accuracy of creep-damage predictions in thinwalled structures using the finite element method Computational Mechanics. 25: 87-98. DOI: 10.1007/S004660050018 |
0.578 |
|
1997 |
Altenbach H, Altenbach J, Naumenko K. On the Prediction of Creep Damage by Bending of Thin-Walled Structures Mechanics of Time-Dependent Materials. 1: 181-193. DOI: 10.1023/A:1009794001209 |
0.616 |
|
1997 |
Altenbach H, Naumenko K. Creep bending of thin-walled shells and plates by consideration of finite deflections Computational Mechanics. 19: 490-495. DOI: 10.1007/S004660050197 |
0.603 |
|
1997 |
Altenbach H, Morachkovsky O, Naumenko K, Sychov A. Geometrically nonlinear bending of thin-walled shells and plates under creep-damage conditions Archive of Applied Mechanics. 67: 339-352. DOI: 10.1007/S004190050122 |
0.592 |
|
1996 |
Altenbach H, Morachkovsky O, Naumenko K, Sichov A. Zum Kriechen dünner Rotationsschalen unter Einbeziehung geometrischer Nichtlinearität sowie der Asymmetrie der Werkstoffeigenschaften Forschung Im Ingenieurwesen-Engineering Research. 62: 47-57. DOI: 10.1007/Bf02609369 |
0.464 |
|
Show low-probability matches. |