| Year |
Citation |
Score |
| 2024 |
Hohmann M, Kühn D, Ni D, Späth M, Ghosh A, Rohde M, Stelzle F, Klämpfl F, Schmidt M. Relevant parameters for laser surgery of soft tissue. Scientific Reports. 14: 1263. PMID 38218912 DOI: 10.1038/s41598-024-51449-1 |
0.307 |
|
| 2023 |
Kaufmann F, Strugulea M, Höltgen C, Roth S, Schmidt M. Seam Properties of Overlap Welding Strategies from Copper to Aluminum Using Green Laser Radiation for Battery Tab Connections in Electric Vehicles. Materials (Basel, Switzerland). 16. PMID 36770076 DOI: 10.3390/ma16031069 |
0.303 |
|
| 2022 |
Will T, Jeron T, Hoelbling C, Müller L, Schmidt M. In-Process Analysis of Melt Pool Fluctuations with Scanning Optical Coherence Tomography for Laser Welding of Copper for Quality Monitoring. Micromachines. 13. PMID 36363958 DOI: 10.3390/mi13111937 |
0.309 |
|
| 2020 |
Hupfeld T, Sommereyns A, Riahi F, Doñate-Buendía C, Gann S, Schmidt M, Gökce B, Barcikowski S. Analysis of the Nanoparticle Dispersion and Its Effect on the Crystalline Microstructure in Carbon-Additivated PA12 Feedstock Material for Laser Powder Bed Fusion. Materials (Basel, Switzerland). 13. PMID 32722350 DOI: 10.3390/Ma13153312 |
0.307 |
|
| 2020 |
Canziani H, Chiera S, Schuffenhauer T, Kopp SP, Metzger F, Bück A, Schmidt M, Vogel N. Bottom-Up Design of Composite Supraparticles for Powder-Based Additive Manufacturing. Small (Weinheim An Der Bergstrasse, Germany). e2002076. PMID 32578351 DOI: 10.1002/Smll.202002076 |
0.342 |
|
| 2020 |
Späth M, Klämpfl F, Stelzle F, Hohmann M, Lengenfelder B, Schmidt M. A quantitative evaluation of the use of medical lasers in German hospitals. Journal of Biophotonics. 13: 201900238. PMID 31637849 DOI: 10.1002/Jbio.201900238 |
0.386 |
|
| 2020 |
Kolb T, Elahi R, Seeger J, Soris M, Scheitler C, Hentschel O, Tremel J, Schmidt M. Camera signal dependencies within coaxial melt pool monitoring in laser powder bed fusion Rapid Prototyping Journal. 26: 100-106. DOI: 10.1108/Rpj-01-2019-0022 |
0.382 |
|
| 2020 |
Hupfeld T, Salamon S, Landers J, Sommereyns A, Doñate-Buendía C, Schmidt J, Wende H, Schmidt M, Barcikowski S, Gökce B. 3D printing of magnetic parts by laser powder bed fusion of iron oxide nanoparticle functionalized polyamide powders Journal of Materials Chemistry C. 8: 12204-12217. DOI: 10.1039/D0Tc02740E |
0.348 |
|
| 2020 |
Braeuer PAB, Bahr LA, Röhricht M, Schmidt M, Will S. Spatially-resolved crystallinity determination of polymer welding seams by Raman-microscopy Procedia Cirp. 94: 796-801. DOI: 10.1016/J.Procir.2020.09.128 |
0.365 |
|
| 2020 |
Saffer J, Dörres T, Schaumberger K, Ermer J, Kaufmann F, Wittmann A, Roth S, Schmidt M. Laser beam welding of heat-resistant mixed joints using laser-based pre- and post-heating Procedia Cirp. 94: 671-675. DOI: 10.1016/J.Procir.2020.09.105 |
0.354 |
|
| 2020 |
Sommereyns A, Hupfeld T, Gökce B, Barcikowski S, Schmidt M. Evaluation of essential powder properties through complementary particle size analysis methods for laser powder bed fusion of polymers Procedia Cirp. 94: 116-121. DOI: 10.1016/J.Procir.2020.09.023 |
0.362 |
|
| 2020 |
Döring M, Boussinot G, Hagen JF, Apel M, Kohl S, Schmidt M. Scaling melt pool geometry over a wide range of laser scanning speeds during laser-based Powder Bed Fusion Procedia Cirp. 94: 58-63. DOI: 10.1016/J.Procir.2020.09.012 |
0.418 |
|
| 2020 |
Luo N, Scheitler C, Ciftci N, Galgon F, Fu Z, Uhlenwinkel V, Schmidt M, Körner C. Preparation of Fe-Co-B-Si-Nb bulk metallic glasses by laser powder bed fusion: Microstructure and properties Materials Characterization. 162: 110206. DOI: 10.1016/J.Matchar.2020.110206 |
0.356 |
|
| 2020 |
Horcher A, Tangermann-Gerk K, Barroso G, Schmidt M, Motz G. Laser and furnace pyrolyzed organosilazane-based glass/ZrO2 composite coating system—A comparison Journal of the European Ceramic Society. 40: 2642-2651. DOI: 10.1016/J.Jeurceramsoc.2019.10.040 |
0.362 |
|
| 2020 |
Eschner E, Staudt T, Schmidt M. Correlation of spatter behavior and process zone formation in powder bed fusion of metals Cirp Annals-Manufacturing Technology. 69: 209-212. DOI: 10.1016/J.Cirp.2020.04.092 |
0.37 |
|
| 2020 |
Winter J, Rapp S, Spellauge M, Eulenkamp C, Schmidt M, Huber HP. Ultrafast pump-probe ellipsometry and microscopy reveal the surface dynamics of femtosecond laser ablation of aluminium and stainless steel Applied Surface Science. 511: 145514. DOI: 10.1016/J.Apsusc.2020.145514 |
0.421 |
|
| 2020 |
Hupfeld T, Sommereyns A, Schuffenhauer T, Zhuravlev E, Krebs M, Gann S, Keßler O, Schmidt M, Gökce B, Barcikowski S. How colloidal surface additivation of polyamide 12 powders with well-dispersed silver nanoparticles influences the crystallization already at low 0.01 vol% Additive Manufacturing. 36: 101419. DOI: 10.1016/J.Addma.2020.101419 |
0.321 |
|
| 2020 |
Gilmutdinov AK, Gorunov AI, Nyukhlaev OA, Schmidt M. Investigations of the sound frequency effect on laser acoustic welding of stainless steel The International Journal of Advanced Manufacturing Technology. 106: 3033-3043. DOI: 10.1007/S00170-019-04825-5 |
0.344 |
|
| 2019 |
Rasch M, Heberle J, Dechet MA, Bartels D, Gotterbarm MR, Klein L, Gorunov A, Schmidt J, Körner C, Peukert W, Schmidt M. Grain Structure Evolution of Al-Cu Alloys in Powder Bed Fusion with Laser Beam for Excellent Mechanical Properties. Materials (Basel, Switzerland). 13. PMID 31877928 DOI: 10.3390/Ma13010082 |
0.349 |
|
| 2019 |
Lengenfelder B, Mehari F, Hohmann M, Löhr C, Waldner MJ, Schmidt M, Zalevsky Z, Klämpfl F. Contact-free endoscopic photoacoustic sensing using speckle analysis. Journal of Biophotonics. 12. PMID 31468729 DOI: 10.1002/Jbio.201900130 |
0.305 |
|
| 2019 |
Hohmann M, Dörner D, Mehari F, Chen C, Späth M, Müller S, Albrecht H, Klämpfl F, Schmidt M. Investigation of random lasing as a feedback mechanism for tissue differentiation during laser surgery. Biomedical Optics Express. 10: 807-816. PMID 30800516 DOI: 10.1364/Boe.10.000807 |
0.305 |
|
| 2019 |
Lengenfelder B, Mehari F, Hohmann M, Heinlein M, Chelales E, Waldner MJ, Klämpfl F, Zalevsky Z, Schmidt M. Remote photoacoustic sensing using speckle-analysis. Scientific Reports. 9: 1057. PMID 30705342 DOI: 10.1038/S41598-018-38446-X |
0.372 |
|
| 2019 |
Heuberger E, Schmid D, Weberpals J, Tenner F, Schmidt M. Influence of the brazing speed on the seam characteristics in laser beam brazing of zinc coated steel Journal of Laser Applications. 31: 22407. DOI: 10.2351/1.5096116 |
0.367 |
|
| 2019 |
Huber F, Papke T, Kerkien M, Tost F, Geyer G, Merklein M, Schmidt M. Customized exposure strategies for manufacturing hybrid parts by combining laser beam melting and sheet metal forming Journal of Laser Applications. 31: 22318. DOI: 10.2351/1.5096115 |
0.424 |
|
| 2019 |
Schaumberger K, Beck M, Saffer J, Kaufmann F, Ermer J, Roth S, Schmidt M. Improving process reliability by means of detection of weld seam irregularities in copper via thermographic process monitoring Procedia Manufacturing. 36: 58-63. DOI: 10.1016/J.Promfg.2019.08.009 |
0.42 |
|
| 2019 |
Rasch M, Roider C, Kohl S, Strauß J, Maurer N, Nagulin KY, Schmidt M. Shaped laser beam profiles for heat conduction welding of aluminium-copper alloys Optics and Lasers in Engineering. 115: 179-189. DOI: 10.1016/J.Optlaseng.2018.11.025 |
0.426 |
|
| 2019 |
Huber F, Bischof C, Hentschel O, Heberle J, Zettl J, Nagulin KY, Schmidt M. Laser beam melting and heat-treatment of 1.2343 (AISI H11) tool steel – microstructure and mechanical properties Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 742: 109-115. DOI: 10.1016/J.Msea.2018.11.001 |
0.371 |
|
| 2019 |
Karg MCH, Munk A, Ahuja B, Backer MV, Schmitt JP, Stengel C, Kuryntsev SV, Schmidt M. Expanding particle size distribution and morphology of aluminium-silicon powders for Laser Beam Melting by dry coating with silica nanoparticles Journal of Materials Processing Technology. 264: 155-171. DOI: 10.1016/J.Jmatprotec.2018.08.045 |
0.313 |
|
| 2019 |
Cao J, Brinksmeier E, Fu M, Gao RX, Liang B, Merklein M, Schmidt M, Yanagimoto J. Manufacturing of advanced smart tooling for metal forming Cirp Annals-Manufacturing Technology. 68: 605-628. DOI: 10.1016/J.Cirp.2019.05.001 |
0.304 |
|
| 2019 |
Staudt T, Eschner E, Schmidt M. Temperature determination in laser welding based upon a hyperspectral imaging technique Cirp Annals-Manufacturing Technology. 68: 225-228. DOI: 10.1016/J.Cirp.2019.04.117 |
0.369 |
|
| 2019 |
Kolb T, Mahr A, Huber F, Tremel J, Schmidt M. Qualification of channels produced by laser powder bed fusion: Analysis of cleaning methods, flow rate and melt pool monitoring data Additive Manufacturing. 25: 430-436. DOI: 10.1016/J.Addma.2018.11.026 |
0.353 |
|
| 2018 |
Osmanlic F, Wudy K, Laumer T, Schmidt M, Drummer D, Körner C. Modeling of Laser Beam Absorption in a Polymer Powder Bed. Polymers. 10: 784. PMID 30960709 DOI: 10.3390/Polym10070784 |
0.411 |
|
| 2018 |
Sun B, Salter PS, Roider C, Jesacher A, Strauss J, Heberle J, Schmidt M, Booth MJ. Four-dimensional light shaping: manipulating ultrafast spatiotemporal foci in space and time. Light, Science & Applications. 7: 17117. PMID 30839626 DOI: 10.1038/Lsa.2017.117 |
0.333 |
|
| 2018 |
Karg MCH, Rasch M, Schmidt K, Spitzer SAE, Karsten TF, Schlaug D, Biaciu C, Gorunov AI, Schmidt M. Laser Alloying Advantages by Dry Coating Metallic Powder Mixtures with SiOx Nanoparticles. Nanomaterials. 8: 862. PMID 30347881 DOI: 10.3390/Nano8100862 |
0.316 |
|
| 2018 |
Stein S, Zhao W, Hentschel O, Bickmann C, Roth S, Frick T, Schmidt M. Flight trajectory analysis of CuSn-droplets generated by laser drop on demand jetting, using stereoscopic high-speed imaging. Optics Express. 26: 10968-10980. PMID 29716025 |
0.32 |
|
| 2018 |
Shih CY, Streubel R, Heberle J, Letzel A, Shugaev MV, Wu C, Schmidt M, Gökce B, Barcikowski S, Zhigilei LV. Two mechanisms of nanoparticle generation in picosecond laser ablation in liquids: the origin of the bimodal size distribution. Nanoscale. PMID 29561559 DOI: 10.1039/C7Nr08614H |
0.327 |
|
| 2018 |
Beer O, Merklein C, Gerhard D, Hentschel O, Rasch M, Schmidt M. Processing of the Heat Resistant Bearing Steel M50NiL by Selective Laser Melting Htm Journal of Heat Treatment and Materials. 73: 187-201. DOI: 10.3139/105.110358 |
0.37 |
|
| 2018 |
Tenner F, Eschner E, Lutz B, Schmidt M. Development of a joining gap control system for laser welding of zinc-coated steel sheets driven by process observation Journal of Laser Applications. 30: 32402. DOI: 10.2351/1.5040622 |
0.355 |
|
| 2018 |
Geißler B, Laumer T, Wübbeke A, Lakemeyer P, Frick T, Schöppner V, Schmidt M. Analysis of the interaction between the temperature field and the weld seam morphology in laser transmission welding by using two different discrete laser wavelengths Journal of Laser Applications. 30: 32408. DOI: 10.2351/1.5040617 |
0.443 |
|
| 2018 |
Schaumberger K, Mann V, Mödl M, Hofmann K, Stein S, Roth S, Schmidt M. Influence of focal spot diameter and beam oscillation on the process efficiency of laser beam welding utilizing a direct diode laser Procedia Cirp. 74: 466-469. DOI: 10.1016/J.Procir.2018.08.149 |
0.412 |
|
| 2018 |
Mann V, Hofmann K, Schaumberger K, Weigert T, Schuster S, Hafenecker J, Hübner S, Lipinski L, Roth S, Schmidt M. Influence of oscillation frequency and focal diameter on weld pool geometry and temperature field in laser beam welding of high strength steels Procedia Cirp. 74: 470-474. DOI: 10.1016/J.Procir.2018.08.148 |
0.333 |
|
| 2018 |
Schmailzl A, Quandt B, Schmidt M, Hierl S. In-Situ process monitoring during laser transmission welding of PA6-GF30 Procedia Cirp. 74: 524-527. DOI: 10.1016/J.Procir.2018.08.131 |
0.359 |
|
| 2018 |
Miyamoto I, Cvecek K, Schmidt M. Nonlinear absorption dynamics simulated in internal modification of glass at 532nm and 1064nm by ultrashort laser pulses Procedia Cirp. 74: 344-348. DOI: 10.1016/J.Procir.2018.08.129 |
0.402 |
|
| 2018 |
Cvecek K, Miyamoto I, Heberle J, Bergler M, Ligny DD, Schmidt M. Analysis of shockwave formation in glass welding by ultra-short pulses Procedia Cirp. 74: 339-343. DOI: 10.1016/J.Procir.2018.08.128 |
0.373 |
|
| 2018 |
Papke T, Dubjella P, Butzhammer L, Huber F, Petrunenko O, Klose D, Schmidt M, Merklein M. Influence of a bending operation on the bonding strength for hybrid parts made of Ti-6Al-4V Procedia Cirp. 74: 290-294. DOI: 10.1016/J.Procir.2018.08.113 |
0.327 |
|
| 2018 |
Hupfeld T, Laumer T, Stichel T, Schuffenhauer T, Heberle J, Schmidt M, Barcikowski S, Gökce B. A new approach to coat PA12 powders with laser-generated nanoparticles for selective laser sintering Procedia Cirp. 74: 244-248. DOI: 10.1016/J.Procir.2018.08.103 |
0.41 |
|
| 2018 |
Staudt T, Eschner E, Tenner F, Schmidt M. Deriving spectral information upon the laser welding process employing a hyperspectral imaging technique Procedia Cirp. 74: 636-639. DOI: 10.1016/J.Procir.2018.08.061 |
0.405 |
|
| 2018 |
Kolb T, Gebhardt P, Schmidt O, Tremel J, Schmidt M. Melt pool monitoring for laser beam melting of metals: assistance for material qualification for the stainless steel 1.4057 Procedia Cirp. 74: 116-121. DOI: 10.1016/J.Procir.2018.08.058 |
0.395 |
|
| 2018 |
Kolb T, Müller L, Tremel J, Schmidt M. Melt pool monitoring for laser beam melting of metals: inline-evaluation and remelting of surfaces Procedia Cirp. 74: 111-115. DOI: 10.1016/J.Procir.2018.08.052 |
0.379 |
|
| 2018 |
Koepf JA, Rasch M, Meyer AJ, Markl M, Schmidt M, Körner C. 3D grain growth simulation and experimental verification in laser beam melting of IN718 Procedia Cirp. 74: 82-86. DOI: 10.1016/J.Procir.2018.08.034 |
0.359 |
|
| 2018 |
Hagen JF, Rasch M, Kohl S, Schmidt M. Geometry dependent microstructures: bug or feature? Procedia Cirp. 74: 724-727. DOI: 10.1016/J.Procir.2018.08.024 |
0.317 |
|
| 2018 |
Stichel T, Frick T, Laumer T, Tenner F, Hausotte T, Merklein M, Schmidt M. A Round Robin study for selective laser sintering of polymers: Back tracing of the pore morphology to the process parameters Journal of Materials Processing Technology. 252: 537-545. DOI: 10.1016/J.Jmatprotec.2017.10.013 |
0.387 |
|
| 2018 |
Schmidt M, Zäh M, Li L, Duflou J, Overmeyer L, Vollertsen F. Advances in macro-scale laser processing Cirp Annals-Manufacturing Technology. 67: 719-742. DOI: 10.1016/J.Cirp.2018.05.006 |
0.419 |
|
| 2018 |
Heberle J, Häfner T, Schmidt M. Efficient and damage-free ultrashort pulsed laser cutting of polymer intraocular lens implants Cirp Annals-Manufacturing Technology. 67: 197-200. DOI: 10.1016/J.Cirp.2018.04.095 |
0.403 |
|
| 2018 |
Tenner J, Zhao R, Tremmel S, Häfner T, Schmidt M, Merklein M. Tribological Behavior of Carbon Based Coatings Adapted to Lubricant-Free Forming Conditions International Journal of Precision Engineering and Manufacturing-Green Technology. 5: 361-367. DOI: 10.1007/S40684-018-0038-1 |
0.327 |
|
| 2018 |
Häfner T, Strauß J, Roider C, Heberle J, Schmidt M. Tailored laser beam shaping for efficient and accurate microstructuring Applied Physics A. 124: 1-9. DOI: 10.1007/S00339-017-1530-0 |
0.436 |
|
| 2017 |
Alexeev I, Wu J, Karg M, Zalevsky Z, Schmidt M. Determination of laser beam focus position based on secondary speckles pattern analysis. Applied Optics. 56: 7413-7418. PMID 29048063 DOI: 10.1364/Ao.56.007413 |
0.413 |
|
| 2017 |
Stelzle F, Rohde M, Riemann M, Oetter N, Adler W, Tangermann-Gerk K, Schmidt M, Knipfer C. Autofluorescence spectroscopy for nerve-sparing laser surgery of the head and neck-the influence of laser-tissue interaction. Lasers in Medical Science. PMID 28551764 DOI: 10.1007/S10103-017-2240-8 |
0.377 |
|
| 2017 |
Karg MCH, Ahuja B, Wiesenmayer S, Kuryntsev SV, Schmidt M. Effects of Process Conditions on the Mechanical Behavior of Aluminium Wrought Alloy EN AW-2219 (AlCu6Mn) Additively Manufactured by Laser Beam Melting in Powder Bed Micromachines. 8: 23. DOI: 10.3390/Mi8010023 |
0.36 |
|
| 2017 |
Heberle J, Knoll M, Alexeev I, Häfner T, Schmidt M. High-speed pump-probe imaging of ultrashort pulsed laser cutting of polymers Journal of Laser Applications. 29: 22207. DOI: 10.2351/1.4983500 |
0.402 |
|
| 2017 |
Häfner T, Heberle J, Holder D, Schmidt M. Speckle reduction techniques in holographic beam shaping for accurate and efficient picosecond laser structuring Journal of Laser Applications. 29: 22205. DOI: 10.2351/1.4983497 |
0.396 |
|
| 2017 |
Staudt T, Tenner F, Klämpfl F, Schmidt M. Development of a hyperspectral imaging technique for monitoring laser-based material processing Journal of Laser Applications. 29: 22601. DOI: 10.2351/1.4983265 |
0.381 |
|
| 2017 |
Tenner F, Riegel D, Mayer E, Schmidt M. Analytical model of the laser welding of zinc-coated steel sheets by the aid of videography Journal of Laser Applications. 29: 22411. DOI: 10.2351/1.4983236 |
0.359 |
|
| 2017 |
Winter J, Rapp S, Schmidt M, Huber HP. Ultrafast laser energy deposition in copper revealed by simulation and experimental determination of optical properties with pump-probe ellipsometry Proceedings of Spie. 10091. DOI: 10.1117/12.2255946 |
0.439 |
|
| 2017 |
Rapp S, Winter J, Huber HP, Schmidt M. Pump-probe reflectometric and ellipsometric investigation of femtosecond laser pulse induced ablation in molybdenum Proceedings of Spie. 10094: 1009419. DOI: 10.1117/12.2253846 |
0.429 |
|
| 2017 |
Palma AL, Matteocci F, Agresti A, Pescetelli S, Calabro E, Vesce L, Christiansen S, Schmidt M, Carlo AD. Laser-Patterning Engineering for Perovskite Solar Modules With 95% Aperture Ratio Ieee Journal of Photovoltaics. 7: 1674-1680. DOI: 10.1109/Jphotov.2017.2732223 |
0.369 |
|
| 2017 |
Mikschl F, Merle B, Baum M, Heberle J, Göken M, Schmidt M. Micromechanical characterization of laser consolidated nanoparticle ITO layers Thin Solid Films. 642: 214-218. DOI: 10.1016/J.Tsf.2017.09.046 |
0.385 |
|
| 2017 |
Stein S, Wedler J, Rhein S, Schmidt M, Körner C, Michaelis A, Gebhardt S. A process chain for integrating piezoelectric transducers into aluminum die castings to generate smart lightweight structures Results in Physics. 7: 2534-2539. DOI: 10.1016/J.Rinp.2017.07.034 |
0.332 |
|
| 2017 |
Stichel T, Frick T, Laumer T, Tenner F, Hausotte T, Merklein M, Schmidt M. A Round Robin study for Selective Laser Sintering of polyamide 12: Microstructural origin of the mechanical properties Optics and Laser Technology. 89: 31-40. DOI: 10.1016/J.Optlastec.2016.09.042 |
0.328 |
|
| 2017 |
Schmidt M, Merklein M, Bourell D, Dimitrov D, Hausotte T, Wegener K, Overmeyer L, Vollertsen F, Levy GN. Laser based additive manufacturing in industry and academia Cirp Annals. 66: 561-583. DOI: 10.1016/J.Cirp.2017.05.011 |
0.397 |
|
| 2017 |
Winter J, Rapp S, Schmidt M, Huber HP. Ultrafast laser processing of copper: A comparative study of experimental and simulated transient optical properties Applied Surface Science. 417: 2-15. DOI: 10.1016/J.Apsusc.2017.02.070 |
0.359 |
|
| 2017 |
Stein S, Dobler M, Radel T, Strauß M, Breitschwerdt H, Hugger F, Roth S, Schmidt M. Experimental and numerical investigations regarding laser drop on demand jetting of Cu alloys Production Engineering. 11: 275-284. DOI: 10.1007/S11740-017-0737-4 |
0.374 |
|
| 2017 |
Reimann W, Dobler M, Goede M, Schmidt M, Dilger K. Three-beam laser brazing of zinc-coated steel The International Journal of Advanced Manufacturing Technology. 90: 317-328. DOI: 10.1007/S00170-016-9361-2 |
0.416 |
|
| 2016 |
Rohde M, Mehari F, Klämpfl F, Adler W, Neukam FW, Schmidt M, Stelzle F. The differentiation of oral soft- and hard tissues using laser induced breakdown spectroscopy - a prospect for tissue specific laser surgery. Journal of Biophotonics. PMID 27875030 DOI: 10.1002/Jbio.201600153 |
0.362 |
|
| 2016 |
Miyamoto I, Okamoto Y, Tanabe R, Ito Y, Cvecek K, Schmidt M. Mechanism of dynamic plasma motion in internal modification of glass by fs-laser pulses at high pulse repetition rate. Optics Express. 24: 25718-25731. PMID 27828507 DOI: 10.1364/Oe.24.025718 |
0.395 |
|
| 2016 |
Rapp S, Kaiser M, Schmidt M, Huber HP. Ultrafast pump-probe ellipsometry setup for the measurement of transient optical properties during laser ablation. Optics Express. 24: 17572-92. PMID 27505728 DOI: 10.1364/Oe.24.017572 |
0.423 |
|
| 2016 |
Mehari F, Rohde M, Kanawade R, Knipfer C, Adler W, Klämpfl F, Stelzle F, Schmidt M. Investigation of the differentiation of ex vivo nerve and fat tissues using laser-induced breakdown spectroscopy (LIBS): Prospects for tissue-specific laser surgery. Journal of Biophotonics. PMID 26790774 DOI: 10.1002/Jbio.201500256 |
0.379 |
|
| 2016 |
Ahuja B, Schaub A, Junker D, Karg M, Tenner F, Plettke R, Merklein M, Schmidt M. A Round Robin Study For Laser Beam Melting In Metal Powder Bed South African Journal of Industrial Engineering. 27: 30-42. DOI: 10.7166/27-2-1201 |
0.398 |
|
| 2016 |
Junker D, Fedorov A, Hentschel O, Schmidt M, Merklein M. Connection Strength of Additive Manufactured Tool Elements to the Substrate Key Engineering Materials. 716: 389-394. DOI: 10.4028/Www.Scientific.Net/Kem.716.389 |
0.379 |
|
| 2016 |
Mikschl F, Baum M, Schmidt M. Innovative Strategies for the Removal of Organic Compounds in Nanoparticle ITO Layers Journal of Laser Micro Nanoengineering. 11: 124-129. DOI: 10.2961/Jlmn.2016.01.0023 |
0.35 |
|
| 2016 |
Stein S, Heberle J, Suchy M, Tenner F, Hugger F, Roth S, Schmidt M, Erlangen-Nürnberg F. High Temperature Laser Based Drop on Demand Micro Joining of Thin Metallic Layers or Foils using Bronze Braze Preforms Journal of Laser Micro Nanoengineering. 11: 111-116. DOI: 10.2961/Jlmn.2016.01.0021 |
0.344 |
|
| 2016 |
Heberle J, Häfner T, Schmidt M. Nonlinear absorption measurements of intraocular lens polymers by integrating Z-scan Journal of Laser Applications. 28: 22604. DOI: 10.2351/1.4944116 |
0.392 |
|
| 2016 |
Amend P, Mallmann G, Roth S, Schmitt R, Schmidt M. Process-structure-property relationship of laser-joined thermoplastic metal hybrids Journal of Laser Applications. 28. DOI: 10.2351/1.4944099 |
0.36 |
|
| 2016 |
Scheitler C, Hugger F, Hofmann K, Hentschel O, Baetzler T, Roth S, Schmidt M. Experimental investigation of direct diamond laser cladding in combination with high speed camera based process monitoring Journal of Laser Applications. 28: 22304. DOI: 10.2351/1.4944004 |
0.376 |
|
| 2016 |
Heberle J, Bechtold P, Strauß J, Schmidt M. Electro-optic and acousto-optic laser beam scanners Proceedings of Spie. 9736. DOI: 10.1117/12.2212208 |
0.426 |
|
| 2016 |
Dobler M, Wiethop P, Schmid D, Schmidt M. Simulation based analysis of laser beam brazing Proceedings of Spie. 9741. DOI: 10.1117/12.2211732 |
0.428 |
|
| 2016 |
Mehari F, Rohde M, Knipfer C, Kanawade R, Klämpfl F, Adler W, Oetter N, Stelzle F, Schmidt M. Investigation of Laser Induced Breakdown Spectroscopy (LIBS) for the Differentiation of Nerve and Gland Tissue–A Possible Application for a Laser Surgery Feedback Control Mechanism Plasma Science & Technology. 18: 654-660. DOI: 10.1088/1009-0630/18/6/12 |
0.349 |
|
| 2016 |
Launhardt M, Wörz A, Loderer A, Laumer T, Drummer D, Hausotte T, Schmidt M. Detecting surface roughness on SLS parts with various measuring techniques Polymer Testing. 53: 217-226. DOI: 10.1016/J.Polymertesting.2016.05.022 |
0.357 |
|
| 2016 |
Shahmoon A, Strauß J, Zafri H, Schmidt M, Zalevsky Z. High Resolution Fabrication of Interconnection Lines Using Picosecond Laser and Controlled Deposition of Gold Nanoparticles Physics Procedia. 83: 188-193. DOI: 10.1016/J.Phpro.2016.08.153 |
0.347 |
|
| 2016 |
Laukart A, Kohl S, Fritsche H, Grohe A, Kruschke B, Schmidt M. Experimental and Numerical Investigations of Laser Beam Welding with an Ultra-high Brightness Direct-diode Laser Physics Procedia. 83: 1397-1403. DOI: 10.1016/J.Phpro.2016.08.146 |
0.437 |
|
| 2016 |
Lechner T, Noack K, Thöne M, Amend P, Schmidt M, Will S. Investigating the Moisture Content of Polyamide 6 by Raman-Microscopy and Multivariate Data Analysis Physics Procedia. 83: 1271-1278. DOI: 10.1016/J.Phpro.2016.08.134 |
0.394 |
|
| 2016 |
Tenner F, Ramoser S, Dobler M, Zalevsky Z, Schmidt M. Optical Measurement of the Connection State in Laser Brazing Physics Procedia. 83: 1233-1243. DOI: 10.1016/J.Phpro.2016.08.130 |
0.397 |
|
| 2016 |
Strauß J, Häfner T, Dobler M, Heberle J, Schmidt M. Evaluation and Calibration of LCoS SLM for Direct Laser Structuring with Tailored Intensity Distributions Physics Procedia. 83: 1160-1169. DOI: 10.1016/J.Phpro.2016.08.122 |
0.388 |
|
| 2016 |
Amend P, Häfner T, Gränitz M, Roth S, Schmidt M. Effect of Ultrashort Pulse Laser Structuring of Stainless Steel on Laser-based Heat Conduction Joining of Polyamide Steel Hybrids☆ Physics Procedia. 83: 1130-1136. DOI: 10.1016/J.Phpro.2016.08.118 |
0.443 |
|
| 2016 |
Schmailzl A, Hierl S, Schmidt M. Gap-bridging During Quasi-simultaneous Laser Transmission Welding☆ Physics Procedia. 83: 1073-1082. DOI: 10.1016/J.Phpro.2016.08.113 |
0.353 |
|
| 2016 |
Niese B, Amend P, Roth S, Schmidt M. Laser-based Generation of Conductive Circuits on Additive Manufactured Thermoplastic Substrates☆ Physics Procedia. 83: 954-963. DOI: 10.1016/J.Phpro.2016.08.100 |
0.374 |
|
| 2016 |
Schaub A, Ahuja B, Butzhammer L, Osterziel J, Schmidt M, Merklein M. Additive Manufacturing of Functional Elements on Sheet Metal Physics Procedia. 83: 797-807. DOI: 10.1016/J.Phpro.2016.08.082 |
0.394 |
|
| 2016 |
Cvecek K, Gröschel B, Schmidt M. Process Properties of Electronic High Voltage Discharges Triggered by Ultra-short Pulsed Laser Filaments☆ Physics Procedia. 83: 587-596. DOI: 10.1016/J.Phpro.2016.08.061 |
0.407 |
|
| 2016 |
Holzer M, Hofmann K, Mann V, Hugger F, Roth S, Schmidt M. Change of Hot Cracking Susceptibility in Welding of High Strength Aluminum Alloy AA 7075 Physics Procedia. 83: 463-471. DOI: 10.1016/J.Phpro.2016.08.048 |
0.305 |
|
| 2016 |
Mann V, Holzer M, Hofmann K, Özkaya E, Hugger F, Roth S, Schmidt M. Influence of Surface Coatings of Filler Wires on Weld Seam Properties of Laser Beam Welded Copper Connections Physics Procedia. 83: 437-446. DOI: 10.1016/J.Phpro.2016.08.045 |
0.41 |
|
| 2016 |
Buckstegge F, Michel T, Zimmermann M, Roth S, Schmidt M. Advanced Rock Drilling Technologies Using High Laser Power Physics Procedia. 83: 336-343. DOI: 10.1016/J.Phpro.2016.08.035 |
0.38 |
|
| 2016 |
Hofmann K, Neubauer F, Holzer M, Mann V, Hugger F, Roth S, Schmidt M. Effect of Laser Beam Alloying Strategies on the Metallurgical and Mechanical Properties of Hot Forming Tool Steels Physics Procedia. 83: 264-276. DOI: 10.1016/J.Phpro.2016.08.023 |
0.383 |
|
| 2016 |
Schechtel F, Reg Y, Zimmermann M, Stocker T, Knorr F, Mann V, Roth S, Schmidt M. Pulsed Laser Processing of Paper Materials Physics Procedia. 83: 46-52. DOI: 10.1016/J.Phpro.2016.08.006 |
0.43 |
|
| 2016 |
Tenner F, Klämpfl F, Nagulin KY, Schmidt M. [INVITED] Evaluation of process observation features for laser metal welding Optics and Laser Technology. 80: 77-83. DOI: 10.1016/J.Optlastec.2015.12.012 |
0.406 |
|
| 2016 |
Tangermann-Gerk K, Barroso G, Weisenseel B, Greil P, Fey T, Schmidt M, Motz G. Laser pyrolysis of an organosilazane-based glass/ZrO2 composite coating system Materials & Design. 109: 644-651. DOI: 10.1016/J.Matdes.2016.07.102 |
0.338 |
|
| 2016 |
Eberle G, Schmidt M, Pude F, Wegener K. Laser surface and subsurface modification of sapphire using femtosecond pulses Applied Surface Science. 378: 504-512. DOI: 10.1016/J.Apsusc.2016.04.032 |
0.442 |
|
| 2016 |
Wegener M, Spiehl D, Sauer HM, Mikschl F, Liu X, Kölpin N, Schmidt M, Jank MPM, Dörsam E, Roosen A. Flexographic printing of nanoparticulate tin-doped indium oxide inks on PET foils and glass substrates Journal of Materials Science. 1-13. DOI: 10.1007/S10853-016-9772-3 |
0.31 |
|
| 2016 |
Rapp S, Schmidt M, Huber HP. Selective femtosecond laser structuring of dielectric thin films with different band gaps: a time-resolved study of ablation mechanisms Applied Physics A. 122: 1035. DOI: 10.1007/S00339-016-0571-0 |
0.361 |
|
| 2015 |
Bergauer B, Knipfer C, Amann A, Rohde M, Tangermann-Gerk K, Adler W, Schmidt M, Nkenke E, Stelzle F. Does Laser Surgery Interfere with Optical Nerve Identification in Maxillofacial Hard and Soft Tissue?-An Experimental Ex Vivo Study. Sensors (Basel, Switzerland). 15: 25416-32. PMID 26437416 DOI: 10.3390/S151025416 |
0.404 |
|
| 2015 |
Cvecek K, Odato R, Dehmel S, Miyamoto I, Schmidt M. Gap bridging in joining of glass using ultra short laser pulses. Optics Express. 23: 5681-5693. PMID 25836798 DOI: 10.1364/Oe.23.005681 |
0.398 |
|
| 2015 |
Kanawade R, Mahari F, Klämpfl F, Rohde M, Knipfer C, Tangermann-Gerk K, Adler W, Schmidt M, Stelzle F. Qualitative tissue differentiation by analysing the intensity ratios of atomic emission lines using laser induced breakdown spectroscopy (LIBS): prospects for a feedback mechanism for surgical laser systems. Journal of Biophotonics. 8: 153-61. PMID 24376030 DOI: 10.1002/Jbio.201300159 |
0.363 |
|
| 2015 |
Amend P, Hentschel O, Scheitler C, Gorunov AI, Schmidt M. Effect of additive manufactured metallic structures on laser-based thermal joining of thermoplastic metal hybrids Key Engineering Materials. 651: 777-782. DOI: 10.4028/Www.Scientific.Net/Kem.651-653.777 |
0.39 |
|
| 2015 |
Junker D, Hentschel O, Schmidt M, Merklein M. Tailor-made forging tools by Laser Metal Deposition Key Engineering Materials. 651: 707-712. DOI: 10.4028/Www.Scientific.Net/Kem.651-653.707 |
0.41 |
|
| 2015 |
Häfner T, Heberle J, Dobler M, Gränitz M, Alexeev I, Schmidt M. Friction adjustment within dry deep drawing by locally laser textured tool surfaces Key Engineering Materials. 639: 57-64. DOI: 10.4028/Www.Scientific.Net/Kem.639.57 |
0.364 |
|
| 2015 |
Laukart A, Dobler M, Kohl S, Fritsche H, Grohe A, Kruschke B, Schmidt M. Energy Efficient Laser Beam Welding of Metals with a Ultra-High Brightness Direct-Diode Laser System Applied Mechanics and Materials. 805: 162-170. DOI: 10.4028/Www.Scientific.Net/Amm.805.162 |
0.444 |
|
| 2015 |
Karg MCH, Ahuja B, Hentschel O, Schmidt M. Local Hardness Variation of Ti50Cu32Ni15Sn3 Processed by Laser Beam Melting (LBM) International Journal of Embedded Systems. 3: 34-38. DOI: 10.3991/Ijes.V3I1.4293 |
0.405 |
|
| 2015 |
Alexeev I, Heberle J, Cvecek K, Nagulin KY, Schmidt M. High speed pump-probe apparatus for observation of transitional effects in ultrafast laser micromachining processes Micromachines. 6: 1914-1922. DOI: 10.3390/Mi6121462 |
0.423 |
|
| 2015 |
Laumer T, Stichel T, Riedlbauer D, Amend P, Mergheim J, Schmidt M. Realization of multi-material polymer parts by simultaneous laser beam melting Journal of Laser Micro Nanoengineering. 10: 140-147. DOI: 10.2961/Jlmn.2015.02.0006 |
0.398 |
|
| 2015 |
Domke M, Felsl D, Rapp S, Sotrop J, Huber HP, Schmidt M. Evidence of pressure waves in confined laser ablation Journal of Laser Micro Nanoengineering. 10: 119-123. DOI: 10.2961/Jlmn.2015.02.0002 |
0.373 |
|
| 2015 |
Berger S, Oefele F, Schmidt M. Laser transmission welding of carbon fiber reinforced thermoplastic using filler material - A fundamental study Journal of Laser Applications. 27. DOI: 10.2351/1.4906391 |
0.416 |
|
| 2015 |
Tenner F, Berg B, Brock C, Klämpfl F, Schmidt M. Experimental approach for quantification of fluid dynamics in laser metal welding Journal of Laser Applications. 27. DOI: 10.2351/1.4906302 |
0.384 |
|
| 2015 |
Laumer T, Wudy K, Drexler M, Amend P, Roth S, Drummer D, Schmidt M. Editor Note: "fundamental investigation of laser beam melting of polymers for additive manufacture" [J. Laser Appl. 26, 042003 (2014)] Journal of Laser Applications. 27. DOI: 10.2351/1.4897013 |
0.399 |
|
| 2015 |
Ahuja B, Schaub A, Karg M, Schmidt R, Merklein M, Schmidt M. High power laser beam melting of Ti6Al4V on formed sheet metal to achieve hybrid structures Proceedings of Spie - the International Society For Optical Engineering. 9353. DOI: 10.1117/12.2082919 |
0.365 |
|
| 2015 |
Rapp S, Heinrich G, Wollgarten M, Huber HP, Schmidt M. Physical mechanisms of SiNx layer structuring with ultrafast lasers by direct and confined laser ablation Journal of Applied Physics. 117. DOI: 10.1063/1.4914457 |
0.413 |
|
| 2015 |
Tenner F, Brock C, Klämpfl F, Schmidt M. Analysis of the correlation between plasma plume and keyhole behavior in laser metal welding for the modeling of the keyhole geometry Optics and Lasers in Engineering. 64: 32-41. DOI: 10.1016/J.Optlaseng.2014.07.009 |
0.388 |
|
| 2015 |
In'T Veld BH, Overmeyer L, Schmidt M, Wegener K, Malshe A, Bartolo P. Micro additive manufacturing using ultra short laser pulses Cirp Annals - Manufacturing Technology. 64: 701-724. DOI: 10.1016/J.Cirp.2015.05.007 |
0.437 |
|
| 2014 |
Mehari F, Rohde M, Knipfer C, Kanawade R, Klämpfl F, Adler W, Stelzle F, Schmidt M. Laser induced breakdown spectroscopy for bone and cartilage differentiation - ex vivo study as a prospect for a laser surgery feedback mechanism. Biomedical Optics Express. 5: 4013-23. PMID 25426327 DOI: 10.1364/Boe.5.004013 |
0.345 |
|
| 2014 |
Salter PS, Baum M, Alexeev I, Schmidt M, Booth MJ. Exploring the depth range for three-dimensional laser machining with aberration correction. Optics Express. 22: 17644-56. PMID 25089384 DOI: 10.1364/Oe.22.017644 |
0.347 |
|
| 2014 |
Cvecek K, Miyamoto I, Schmidt M. Gas bubble formation in fused silica generated by ultra-short laser pulses Optics Express. 22: 15877-15893. PMID 24977843 DOI: 10.1364/Oe.22.015877 |
0.395 |
|
| 2014 |
Stelzle F, Knipfer C, Bergauer B, Rohde M, Adler W, Tangermann-Gerk K, Nkenke E, Schmidt M. Optical nerve identification in head and neck surgery after Er:YAG laser ablation. Lasers in Medical Science. 29: 1641-8. PMID 24696381 DOI: 10.1007/S10103-014-1569-5 |
0.374 |
|
| 2014 |
Schmidt MA, Silevitch DM, Aeppli G, Rosenbaum TF. Using thermal boundary conditions to engineer the quantum state of a bulk magnet. Proceedings of the National Academy of Sciences of the United States of America. 111: 3689-94. PMID 24567389 DOI: 10.1073/Pnas.1316070111 |
0.447 |
|
| 2014 |
Plettke R, Schaub A, Gröschel C, Scheitler C, Vetter M, Hentschel O, Ranft F, Merklein M, Schmidt M, Drummer D. A new process chain for joining sheet metal to fibre composite sheets Key Engineering Materials. 611: 1468-1475. DOI: 10.4028/Www.Scientific.Net/Kem.611-612.1468 |
0.31 |
|
| 2014 |
Niese B, Amend P, Urmoneit U, Roth S, Schmidt M. Experimental investigation of laser sintering of conductive adhesive for functional prototypes produced by embedding stereolithography Advanced Materials Research. 1038: 75-81. DOI: 10.4028/Www.Scientific.Net/Amr.1038.75 |
0.353 |
|
| 2014 |
Mann V, Hugger F, Roth S, Schmidt M. Influence of temperature and wavelength on optical behavior of copper alloys Applied Mechanics and Materials. 655: 89-94. DOI: 10.4028/Www.Scientific.Net/Amm.655.89 |
0.353 |
|
| 2014 |
Laumer T, Wudy K, Drexler M, Amend P, Roth S, Drummer D, Schmidt M. Fundamental investigation of laser beam melting of polymers for additive manufacture Journal of Laser Applications. 26. DOI: 10.2351/1.4892848 |
0.405 |
|
| 2014 |
Eiselen S, Riedel S, Schmidt M. On the applicability of arbitrarily shaped nanosecond laser pulses for high-quality, high-efficiency micromachining Proceedings of Spie. 9135. DOI: 10.1117/12.2057826 |
0.377 |
|
| 2014 |
Salter PS, Jesacher A, Huang L, Liu X, Baum M, Alexeev I, Schmidt M, Booth MJ. Structural analysis of direct laser written waveguides Proceedings of Spie - the International Society For Optical Engineering. 8968. DOI: 10.1117/12.2040422 |
0.339 |
|
| 2014 |
Baum M, Strauß J, Grüßel F, Alexeev I, Schmidt M. Generation of phase-only holograms by laser ablation of nanoparticulate ITO layers Journal of Optics (United Kingdom). 16. DOI: 10.1088/2040-8978/16/12/125706 |
0.359 |
|
| 2014 |
Niese B, Stichel T, Amend P, Urmoneit U, Roth S, Schmidt M. Manufacturing of conductive circuits for embedding stereolithography by means of conductive adhesive and laser sintering Physics Procedia. 56: 336-344. DOI: 10.1016/J.Phpro.2014.08.179 |
0.382 |
|
| 2014 |
Ahuja B, Karg M, Nagulin KY, Schmidt M. Fabrication and characterization of high strength Al-Cu alloys processed using Laser Beam Melting in metal powder bed Physics Procedia. 56: 135-146. DOI: 10.1016/J.Phpro.2014.08.156 |
0.414 |
|
| 2014 |
Sachs M, Hentschel O, Schmidt J, Karg M, Schmidt M, Wirth KE. Production of Al/Cu-particles and their potential for processing by Laser Beam Melting (LBM) Physics Procedia. 56: 125-134. DOI: 10.1016/J.Phpro.2014.08.155 |
0.315 |
|
| 2014 |
Ahuja B, Schaub A, Karg M, Lechner M, Merklein M, Schmidt M. Developing LBM process parameters for Ti-6Al-4V thin wall structures and determining the corresponding mechanical characteristics Physics Procedia. 56: 90-98. DOI: 10.1016/J.Phpro.2014.08.102 |
0.38 |
|
| 2014 |
Stein S, Heberle J, Gürtler FJ, Cvecek K, Roth S, Schmidt M. Influences of nozzle material on laser droplet brazing joints with Cu89Sn11 preforms Physics Procedia. 56: 709-719. DOI: 10.1016/J.Phpro.2014.08.078 |
0.401 |
|
| 2014 |
Heitmanek M, Dobler M, Graudenz M, Perret W, Göbel G, Schmidt M, Beyer E. Laser brazing with beam scanning: Experimental and simulative analysis Physics Procedia. 56: 689-698. DOI: 10.1016/J.Phpro.2014.08.076 |
0.429 |
|
| 2014 |
Schmitt R, Mallmann G, Devrient M, Schmidt M. 3D polymer weld seam characterization based on optical coherence tomography for laser transmission welding applications Physics Procedia. 56: 1305-1314. DOI: 10.1016/J.Phpro.2014.08.055 |
0.401 |
|
| 2014 |
Tenner F, Brock C, Gürtler FJ, Klämpfl F, Schmidt M. Experimental and numerical analysis of gas dynamics in the keyhole during laser metal welding Physics Procedia. 56: 1268-1276. DOI: 10.1016/J.Phpro.2014.08.050 |
0.353 |
|
| 2014 |
Hugger F, Hofmann K, Stein S, Schmidt M. Laser beam welding of brass Physics Procedia. 56: 576-581. DOI: 10.1016/J.Phpro.2014.08.045 |
0.407 |
|
| 2014 |
Hohmann M, Devrient M, Klämpfl F, Roth S, Schmidt M. Simulation of light propagation within glass fiber filled thermoplastics for Laser transmission welding Physics Procedia. 56: 1198-1207. DOI: 10.1016/J.Phpro.2014.08.035 |
0.388 |
|
| 2014 |
Berger S, Schmidt M. Laser transmission welding of CFRTP using filler material Physics Procedia. 56: 1182-1190. DOI: 10.1016/J.Phpro.2014.08.033 |
0.405 |
|
| 2014 |
Roos C, Schmidt M. Remote laser welding of zinc coated steel sheets in an edge lap configuration with zero gap Physics Procedia. 56: 535-544. DOI: 10.1016/J.Phpro.2014.08.025 |
0.376 |
|
| 2014 |
Domke M, Nobile L, Rapp S, Eiselen S, Sotrop J, Huber HP, Schmidt M. Understanding thin film laser ablation: The role of the effective penetration depth and the film thickness Physics Procedia. 56: 1007-1014. DOI: 10.1016/J.Phpro.2014.08.012 |
0.356 |
|
| 2014 |
Mikschl F, Baum M, Heberle J, Alexeev I, Schmidt M. The influence of laser induced consolidation on the ablation threshold of nanoparticulate ITO-layers Physics Procedia. 56: 991-997. DOI: 10.1016/J.Phpro.2014.08.010 |
0.305 |
|
| 2014 |
Weidinger P, Günther K, Fitzel M, Logvinov R, Ilin A, Ploshikhin V, Hugger F, Mann V, Roth S, Schmidt M. Testing of new materials and computer aided optimization of process parameters and clamping device during predevelopment of laser welding processes Physics Procedia. 56: 487-496. DOI: 10.1016/J.Phpro.2014.08.003 |
0.35 |
|
| 2014 |
Brock C, Hohenstein R, Schmidt M. Mechanisms of vapour plume formation in laser deep penetration welding Optics and Lasers in Engineering. 58: 93-101. DOI: 10.1016/J.Optlaseng.2014.02.001 |
0.417 |
|
| 2014 |
Jeromen A, Held C, Govekar E, Roth S, Schmidt M. Modelling of droplet detachment in the laser droplet brazing process Journal of Materials Processing Technology. 214: 737-749. DOI: 10.1016/J.Jmatprotec.2013.11.005 |
0.351 |
|
| 2014 |
Klocke F, Klink A, Veselovac D, Aspinwall DK, Soo SL, Schmidt M, Schilp J, Levy G, Kruth JP. Turbomachinery component manufacture by application of electrochemical, electro-physical and photonic processes Cirp Annals - Manufacturing Technology. 63: 703-726. DOI: 10.1016/J.Cirp.2014.05.004 |
0.348 |
|
| 2014 |
Rapp S, Rosenberger J, Domke M, Heise G, Huber HP, Schmidt M. Ultrafast pump-probe microscopy reveals the mechanism of selective fs laser structuring of transparent thin films for maskless micropatterning Applied Surface Science. 290: 368-372. DOI: 10.1016/J.Apsusc.2013.11.086 |
0.358 |
|
| 2014 |
Hugger F, Hofmann K, Kohl S, Dobler M, Schmidt M. Spatter formation in laser beam welding using laser beam oscillation Welding in the World. 59: 165-172. DOI: 10.1007/S40194-014-0189-9 |
0.41 |
|
| 2014 |
Miyamoto I, Cvecek K, Okamoto Y, Schmidt M. Internal modification of glass by ultrashort laser pulse and its application to microwelding Applied Physics A. 114: 187-208. DOI: 10.1007/S00339-013-8115-3 |
0.432 |
|
| 2013 |
Stelzle F, Knipfer C, Adler W, Rohde M, Oetter N, Nkenke E, Schmidt M, Tangermann-Gerk K. Tissue discrimination by uncorrected autofluorescence spectra: a proof-of-principle study for tissue-specific laser surgery. Sensors (Basel, Switzerland). 13: 13717-31. PMID 24152930 DOI: 10.3390/S131013717 |
0.314 |
|
| 2013 |
Bechtold P, Hohenstein R, Schmidt M. Evaluation of disparate laser beam deflection technologies by means of number and rate of resolvable spots. Optics Letters. 38: 2934-7. PMID 24104614 DOI: 10.1364/Ol.38.002934 |
0.318 |
|
| 2013 |
Bechtold P, Hohenstein R, Schmidt M. Beam shaping and high-speed, cylinder-lens-free beam guiding using acousto-optical deflectors without additional compensation optics. Optics Express. 21: 14627-35. PMID 23787650 DOI: 10.1364/Oe.21.014627 |
0.368 |
|
| 2013 |
Schmidt MA, Silevitch DM, Woo N, Rosenbaum TF. Sub-Kelvin ac magnetic susceptometry. The Review of Scientific Instruments. 84: 013901. PMID 23387662 DOI: 10.1063/1.4773231 |
0.466 |
|
| 2013 |
Quentin U, Leitz KH, Paulus J, Alexeev I, Schmidt M. Positioning accuracy in optical trap assisted nanostructuring Journal of Laser Micro Nanoengineering. 8: 79-84. DOI: 10.2961/Jlmn.2013.01.0016 |
0.341 |
|
| 2013 |
Okamoto Y, Miyamoto I, Cvecek K, Okada A, Takahashi K, Schmidt M. Evaluation of molten zone in micro-welding of glass by picosecond pulsed laser Journal of Laser Micro Nanoengineering. 8: 65-69. DOI: 10.2961/Jlmn.2013.01.0013 |
0.406 |
|
| 2013 |
Heberle J, Klämpfl F, Alexeev I, Schmidt M. Ultrafast laser surface structuring of intraocular lens polymers Journal of Laser Micro Nanoengineering. 8: 51-55. DOI: 10.2961/Jlmn.2013.01.0011 |
0.365 |
|
| 2013 |
Häfner T, Reg Y, Hetzner H, Schmidt M. Microstructuring tools for sheet bulk metal forming - a designated application for picosecond laser Journal of Laser Micro Nanoengineering. 8: 39-44. DOI: 10.2961/Jlmn.2013.01.0009 |
0.428 |
|
| 2013 |
Alexeev I, Strauss J, Gröschl A, Cvecek K, Schmidt M. Laser focus positioning method with submicrometer accuracy Applied Optics. 52: 415-421. DOI: 10.1364/Ao.52.000415 |
0.408 |
|
| 2013 |
Hessmann MT, Kunz T, Voigt M, Cvecek K, Schmidt M, Bochmann A, Christiansen S, Auer R, Brabec CJ. Material properties of laser-welded thin silicon foils International Journal of Photoenergy. 2013. DOI: 10.1155/2013/724502 |
0.405 |
|
| 2013 |
Weigl M, Schmidt M. Corrosion performance of laser-welded austenitic-ferritic connections Proceedings of Spie - the International Society For Optical Engineering. 8603. DOI: 10.1117/12.2006022 |
0.333 |
|
| 2013 |
Rapp S, Rosenberger J, Domke M, Heise G, Schmidt M, Huber HP. Time and space resolved investigations of confined fs ablation of Ta 2O5/Pt thin film systems Proceedings of Spie - the International Society For Optical Engineering. 8607. DOI: 10.1117/12.2002409 |
0.323 |
|
| 2013 |
Leitz K, Tsai Y, Flad F, Schäffer E, Quentin U, Alexeev I, Fardel R, Arnold CB, Schmidt M. Multiphoton polymerization using optical trap assisted nanopatterning Applied Physics Letters. 102: 243108. DOI: 10.1063/1.4811704 |
0.406 |
|
| 2013 |
Kanawade R, Mehari F, Knipfer C, Rohde M, Tangermann-Gerk K, Schmidt M, Stelzle F. Pilot study of laser induced breakdown spectroscopy for tissue differentiation by monitoring the plume created during laser surgery - An approach on a feedback Laser control mechanism Spectrochimica Acta - Part B Atomic Spectroscopy. 87: 175-181. DOI: 10.1016/J.Sab.2013.05.012 |
0.391 |
|
| 2013 |
Gürtler F-, Karg M, Leitz K-, Schmidt M. Simulation of Laser Beam Melting of Steel Powders using the Three-Dimensional Volume of Fluid Method Physics Procedia. 41: 881-886. DOI: 10.1016/J.Phpro.2013.03.162 |
0.374 |
|
| 2013 |
Rapp S, Domke M, Schmidt M, Huber HP. Physical mechanisms during fs laser ablation of thin SiO2 films Physics Procedia. 41: 734-740. DOI: 10.1016/J.Phpro.2013.03.141 |
0.36 |
|
| 2013 |
Eiselen S, Wu D, Galarneau P, Schmidt M. The Role of Temporal Energy Input in Laser Micro Machining using Nanosecond Pulses Physics Procedia. 41: 683-688. DOI: 10.1016/J.Phpro.2013.03.133 |
0.389 |
|
| 2013 |
Brock C, Tenner F, Klämpfl F, Hohenstein R, Schmidt M. Detection of weld defects by high speed imaging of the vapor plume Physics Procedia. 41: 539-543. DOI: 10.1016/J.Phpro.2013.03.113 |
0.342 |
|
| 2013 |
Tenner F, Brock C, Hohenstein R, Zalevsky Z, Schmidt M. Remote optical detection of the fusion state in laser deep penetration welding Physics Procedia. 41: 515-519. DOI: 10.1016/J.Phpro.2013.03.109 |
0.35 |
|
| 2013 |
Amend P, Pfindel S, Schmidt M. Thermal Joining of Thermoplastic Metal Hybrids by Means Of Mono- and Polychromatic Radiation Physics Procedia. 41: 98-105. DOI: 10.1016/J.Phpro.2013.03.056 |
0.304 |
|
| 2013 |
Devrient M, Kern M, Jaeschke P, Stute U, Haferkamp H, Schmidt M. Experimental investigation of laser transmission welding of thermoplastics with part-adapted temperature fields Physics Procedia. 41: 59-69. DOI: 10.1016/J.Phpro.2013.03.052 |
0.418 |
|
| 2013 |
Quentin U, Heberle J, Held C, Schmidt M. Laser Droplet Brazing for Electrical Contacting of Composite Materials with Integrated Active Elements Procedia Materials Science. 2: 181-188. DOI: 10.1016/J.Mspro.2013.02.022 |
0.399 |
|
| 2013 |
Baum M, Kim H, Alexeev I, Piqué A, Schmidt M. Generation of transparent conductive electrodes by laser consolidation of LIFT printed ITO nanoparticle layers Applied Physics a: Materials Science and Processing. 111: 799-805. DOI: 10.1007/S00339-013-7646-Y |
0.36 |
|
| 2012 |
Bechtold P, Hentschel O, Schmidt M. Analytic and experimental investigations on influence of harmonic generation on acousto-optical modulation. Optics Express. 20: 19168-75. PMID 23038557 DOI: 10.1364/Oe.20.019168 |
0.336 |
|
| 2012 |
Stelzle F, Terwey I, Knipfer C, Adler W, Tangermann-Gerk K, Nkenke E, Schmidt M. The impact of laser ablation on optical soft tissue differentiation for tissue specific laser surgery-an experimental ex vivo study Journal of Translational Medicine. 10: 123-123. PMID 22704127 DOI: 10.1186/1479-5876-10-123 |
0.368 |
|
| 2012 |
Domke M, Rapp S, Schmidt M, Huber HP. Ultrafast pump-probe microscopy with high temporal dynamic range. Optics Express. 20: 10330-8. PMID 22535122 DOI: 10.1364/Oe.20.010330 |
0.39 |
|
| 2012 |
Stelzle F, Adler W, Zam A, Tangermann-Gerk K, Knipfer C, Douplik A, Schmidt M, Nkenke E. In vivo optical tissue differentiation by diffuse reflectance spectroscopy: preliminary results for tissue-specific laser surgery. Surgical Innovation. 19: 385-393. PMID 22344924 DOI: 10.1177/1553350611429692 |
0.312 |
|
| 2012 |
Miyamoto I, Cvecek K, Okamoto Y, Schmidt M, Helvajian H. Characteristics of laser absorption and welding in FOTURAN glass by ultrashort laser pulses. Optics Express. 19: 22961-73. PMID 22109175 DOI: 10.1364/OE.19.022961 |
0.324 |
|
| 2012 |
Bechtold P, Mayer G, Lühring P, Schmidt M. Novel system technology for trepanning a laser beam at arbitrary developments of angle of incidence and lateral focus position Key Engineering Materials. 523: 238-243. DOI: 10.4028/Www.Scientific.Net/Kem.523-524.238 |
0.385 |
|
| 2012 |
Cvecek K, Miyamoto I, Strauss J, Bui V, Scharfenberg S, Schmidt M. Strength of Joining Seams in Glass Welded by Ultra-fast Lasers Depending on Focus Height Journal of Laser Micro Nanoengineering. 7: 68-72. DOI: 10.2961/Jlmn.2012.01.0013 |
0.431 |
|
| 2012 |
Quentin U, Leitz K, Deichmann L, Alexeev I, Schmidt M. Optical trap assisted laser nanostructuring in the near-field of microparticles Journal of Laser Applications. 24: 42003. DOI: 10.2351/1.4704853 |
0.402 |
|
| 2012 |
Alexeev I, Quentin U, Leitz KH, Schmidt M. Optical trap kits: issues to be aware of European Journal of Physics. 33: 427-437. DOI: 10.1088/0143-0807/33/2/427 |
0.303 |
|
| 2012 |
Leitz K, Koch H, Otto A, Maaz A, Löwer T, Schmidt M. Numerical Simulation of Drilling with Pulsed Beams Physics Procedia. 39: 881-892. DOI: 10.1016/J.Phpro.2012.10.113 |
0.318 |
|
| 2012 |
Strauß J, Cvecek K, Gröschl A, Alexeev I, Schmidt M. Focus Alignment Method for Laser Manufacturing at Sub-micron Positional Accuracy Physics Procedia. 39: 800-806. DOI: 10.1016/J.Phpro.2012.10.103 |
0.396 |
|
| 2012 |
Bechtold P, Bauer D, Schmidt M. Beam Profile Deformation of Fs-laser Pulses During Electro-Optic Scanning with KTN Crystals Physics Procedia. 39: 683-692. DOI: 10.1016/J.Phpro.2012.10.089 |
0.403 |
|
| 2012 |
Tsai Y, Leitz K, Fardel R, Schmidt M, Arnold CB. Generating Nanostructures with Multiphoton Absorption Polymerization using Optical Trap Assisted Nanopatterning Physics Procedia. 39: 669-673. DOI: 10.1016/J.Phpro.2012.10.087 |
0.332 |
|
| 2012 |
Alexeev I, Cvecek K, Genser J, Schmidt M. Direct Waveguide Writing with High Energy High Repetition Rate Picosecond Laser Pulses Physics Procedia. 39: 621-627. DOI: 10.1016/J.Phpro.2012.10.081 |
0.416 |
|
| 2012 |
Held C, Quentin U, Heberle J, Gürtler F, Weigl M, Schmidt M. Laser droplet brazing for the electrical contacting of composite materials with integrated active elements Physics Procedia. 39: 585-593. DOI: 10.1016/J.Phpro.2012.10.077 |
0.411 |
|
| 2012 |
Cvecek K, Miyamoto I, Adam M, Schmidt M. Effects of spherical aberrations on micro welding of glass using ultra short laser pulses Physics Procedia. 39: 563-568. DOI: 10.1016/J.Phpro.2012.10.074 |
0.407 |
|
| 2012 |
Miyamoto I, Cvecek K, Schmidt M. Simple Evaluation Procedure of Nonlinear Absorptivity in Glass Welding using USLP with High-Pulse Repetition Rates Physics Procedia. 39: 526-533. DOI: 10.1016/J.Phpro.2012.10.069 |
0.344 |
|
| 2012 |
Laumer T, Karg M, Schmidt M. Laser Beam Melting of Multi-Material Components Physics Procedia. 39: 518-525. DOI: 10.1016/J.Phpro.2012.10.068 |
0.358 |
|
| 2012 |
Sichani EF, Kohl S, Schmidt M, Kruth J-, Duflou JR. On Plasma Formation in CO2 Fusion Laser Cutting of Stainless Steel Physics Procedia. 39: 197-203. DOI: 10.1016/J.Phpro.2012.10.030 |
0.385 |
|
| 2012 |
Amend P, Pillach B, Frick T, Schmidt M. Laser-Based Hot-Melt Bonding of Thermosetting GFRP Physics Procedia. 39: 147-153. DOI: 10.1016/J.Phpro.2012.10.024 |
0.356 |
|
| 2012 |
Wippo V, Devrient M, Kern M, Jaeschke P, Frick T, Stute U, Schmidt M, Haferkamp H. Evaluation of a Pyrometric-based Temperature Measuring Process for the Laser Transmission Welding Physics Procedia. 39: 128-136. DOI: 10.1016/J.Phpro.2012.10.022 |
0.395 |
|
| 2012 |
Devrient M, Da X, Frick T, Schmidt M. Experimental and Simulative Investigation of Laser Transmission Welding under Consideration of Scattering Physics Procedia. 39: 117-127. DOI: 10.1016/J.Phpro.2012.10.021 |
0.364 |
|
| 2012 |
Leitz K, Quentin U, Alexeev I, Schmidt M. Process investigations of optical trap assisted direct-write microsphere near-field nanostructuring Cirp Annals-Manufacturing Technology. 61: 207-210. DOI: 10.1016/J.Cirp.2012.03.047 |
0.388 |
|
| 2012 |
Domke M, Rapp S, Schmidt M, Huber HP. Ultra-fast movies of thin-film laser ablation Applied Physics a: Materials Science and Processing. 109: 409-420. DOI: 10.1007/S00339-012-7072-6 |
0.415 |
|
| 2012 |
Baum M, Polster S, Jank MPM, Alexeev I, Frey L, Schmidt M. Efficient laser induced consolidation of nanoparticulate ZnO thin films with reduced thermal budget Applied Physics A. 107: 269-273. DOI: 10.1007/S00339-012-6871-0 |
0.328 |
|
| 2012 |
Leitz K, Koch H, Otto A, Schmidt M. Numerical simulation of process dynamics during laser beam drilling with short pulses Applied Physics A. 106: 885-891. DOI: 10.1007/S00339-011-6702-8 |
0.446 |
|
| 2011 |
Miyamoto I, Cvecek K, Schmidt M. Evaluation of nonlinear absorptivity in internal modification of bulk glass by ultrashort laser pulses Optics Express. 19: 10714-10727. PMID 21643328 DOI: 10.1364/Oe.19.010714 |
0.409 |
|
| 2011 |
Cvecek K, Miyamoto I, Strauss J, Wolf M, Frick T, Schmidt M. Sample preparation method for glass welding by ultrashort laser pulses yields higher seam strength. Applied Optics. 50: 1941-1944. PMID 21532677 DOI: 10.1364/Ao.50.001941 |
0.373 |
|
| 2011 |
Baum M, Alexeev I, Schmidt M, Erlangen-Nuremberg F. Laser Treatment of ITO and ZnO Nanoparticles for the Production of Thin Conducting Layers on Transparent Substrates Journal of Laser Micro Nanoengineering. 6: 191-194. DOI: 10.2961/Jlmn.2011.03.0003 |
0.318 |
|
| 2011 |
Roth S, Cvecek K, Miyamoto I, Schmidt M. Glass welding technology using ultra short laser pulses Proceedings of Spie. 7920: 792006. DOI: 10.1117/12.881183 |
0.41 |
|
| 2011 |
Leitz K-, Quentin U, Hornung B, Otto A, Alexeev I, Schmidt M. Ultrafast microsphere near-field nanostructuring Proceedings of Spie. 7925: 792518. DOI: 10.1117/12.874884 |
0.435 |
|
| 2011 |
Hessmann MT, Kunz T, Burkert I, Gawehns N, Schaefer L, Frick T, Schmidt M, Meidel B, Auer R, Brabec CJ. Laser process for extended silicon thin film solar cells Thin Solid Films. 520: 595-599. DOI: 10.1016/J.Tsf.2011.07.031 |
0.366 |
|
| 2011 |
Koch H, Kägeler C, Otto A, Schmidt M. Analysis of Welding Zinc Coated Steel Sheets in Zero Gap Configuration by 3D Simulations and High Speed Imaging Physics Procedia. 12: 428-436. DOI: 10.1016/J.Phpro.2011.03.153 |
0.375 |
|
| 2011 |
Eiselen S, Zimmermann CG, Bechtold P, Schmidt M. Experimental Studies on Joining thin Silver Foils by Recrystallization using Ultra Short Laser Pulses Physics Procedia. 12: 355-362. DOI: 10.1016/J.Phpro.2011.03.144 |
0.431 |
|
| 2011 |
Weigl M, Albert F, Schmidt M. Enhancing the ductility of laser-welde copper-aluminum connections by using adapted filler materia Physics Procedia. 12: 335-341. DOI: 10.1016/J.Phpro.2011.03.141 |
0.331 |
|
| 2011 |
Leitz K, Redlingshöfer B, Reg Y, Otto A, Schmidt M. Metal Ablation with Short and Ultrashort Laser Pulses Physics Procedia. 12: 230-238. DOI: 10.1016/J.Phpro.2011.03.128 |
0.416 |
|
| 2011 |
Reg Y, Leitz K, Schmidt M. Influence of Processing Gas on the Ablation Quality at ns-Laser Beam Ablation Physics Procedia. 12: 182-187. DOI: 10.1016/J.Phpro.2011.03.120 |
0.414 |
|
| 2011 |
Brock C, Hohenstein R, Schmidt M. Towards Fast Tracking of the Keyhole Geometry Physics Procedia. 12: 697-703. DOI: 10.1016/J.Phpro.2011.03.087 |
0.339 |
|
| 2011 |
Bartkowiak K, Ullrich S, Frick T, Schmidt M. New Developments of Laser Processing Aluminium Alloys via Additive Manufacturing Technique Physics Procedia. 12: 393-401. DOI: 10.1016/J.Phpro.2011.03.050 |
0.387 |
|
| 2011 |
Amend P, Frick T, Schmidt M. Experimental Studies on Laser-based Hot-melt Bonding of thermosetting Composites and Thermoplastics Physics Procedia. 12: 166-173. DOI: 10.1016/J.Phpro.2011.03.021 |
0.389 |
|
| 2011 |
Devrient M, Frick T, Schmidt M. Laser transmission welding of optical transparent thermoplastics Physics Procedia. 12: 157-165. DOI: 10.1016/J.Phpro.2011.03.020 |
0.418 |
|
| 2011 |
Otto A, Koch H, Leitz K, Schmidt M. Numerical Simulations - A Versatile Approach for Better Understanding Dynamics in Laser Material Processing Physics Procedia. 12: 11-20. DOI: 10.1016/J.Phpro.2011.03.003 |
0.402 |
|
| 2011 |
Li L, Hong M, Schmidt M, Zhong M, Malshe A, Huis In'Tveld B, Kovalenko V. Laser nano-manufacturing - State of the art and challenges Cirp Annals - Manufacturing Technology. 60: 735-755. DOI: 10.1016/J.Cirp.2011.05.005 |
0.404 |
|
| 2010 |
Stelzle F, Tangermann-Gerk K, Adler W, Zam A, Schmidt M, Douplik A, Nkenke E. Diffuse reflectance spectroscopy for optical soft tissue differentiation as remote feedback control for tissue‐specific laser surgery Lasers in Surgery and Medicine. 42: 319-325. PMID 20432281 DOI: 10.1002/Lsm.20909 |
0.307 |
|
| 2010 |
Schmidt M. Laser-Bonding in High Power Electronics Journal of Laser Micro Nanoengineering. 5: 242-247. DOI: 10.2961/Jlmn.2010.03.0012 |
0.334 |
|
| 2010 |
Zam A, Stelzle F, Tangermann-Gerk K, Adler W, Nkenke E, Schmidt M, Douplik A. Tissue differentiation by diffuse reflectance spectroscopy for automated oral and maxillofacial laser surgery: ex vivo pilot study Bios. 7555: 755516. DOI: 10.1117/12.841674 |
0.32 |
|
| 2010 |
Alexeev I, Leitz K-, Otto A, Schmidt M. Application of Bessel beams for ultrafast laser volume structuring of non transparent media Physics Procedia. 5: 533-540. DOI: 10.1016/J.Phpro.2010.08.177 |
0.421 |
|
| 2010 |
Bechtold P, Eiselen S, Schmidt M. Influence of electrostatic fields and laser-induced discharges on ultrashort laser pulse drilling of copper Physics Procedia. 5: 525-531. DOI: 10.1016/J.Phpro.2010.08.176 |
0.39 |
|
| 2010 |
Schaefer L, Koch H, Tangermann-Gerk K, Hessmann M, Kunz T, Frick T, Schmidt M. Laser based joining of monocrystalline silicon foils Physics Procedia. 5: 503-510. DOI: 10.1016/J.Phpro.2010.08.173 |
0.414 |
|
| 2010 |
Cvecek K, Alexeev I, Miyamoto I, Schmidt M. Defect formation in glass welding by means of ultra short laser pulses Physics Procedia. 5: 495-502. DOI: 10.1016/J.Phpro.2010.08.172 |
0.419 |
|
| 2010 |
Leitz K, Quentin U, Hornung B, Otto A, Alexeev I, Schmidt M. Microsphere Near-field Nanostructuring using Picosecond Pulses Physics Procedia. 5: 237-244. DOI: 10.1016/J.Phpro.2010.08.142 |
0.398 |
|
| 2010 |
Otto A, Schmidt M. Towards a universal numerical simulation model for laser material processing Physics Procedia. 5: 35-46. DOI: 10.1016/J.Phpro.2010.08.120 |
0.407 |
|
| 2010 |
Zam A, Stelzle F, Tangermann-Gerk K, Adler W, Nkenke E, Neukam FW, Schmidt M, Douplik A. In vivo soft tissue differentiation by diffuse reflectance spectroscopy: preliminary results Physics Procedia. 5: 655-658. DOI: 10.1016/J.Phpro.2010.08.095 |
0.315 |
|
| 2010 |
Stelzle F, Zam A, Adler W, Douplik A, Tangermann-Gerk K, Nkenke E, Neukam FW, Schmidt M. Diffuse reflectance spectroscopy for optical nerve identification: Preliminary ex vivo results for feedback controlled oral and maxillofacial laser surgery Physics Procedia. 5: 647-654. DOI: 10.1016/J.Phpro.2010.08.094 |
0.304 |
|
| 2010 |
Amend P, Pscherer C, Rechtenwald T, Frick T, Schmidt M. A fast and flexible method for manufacturing 3D molded interconnect devices by the use of a rapid prototyping technology Physics Procedia. 5: 561-572. DOI: 10.1016/J.Phpro.2010.08.084 |
0.39 |
|
| 2010 |
Brock C, Hohenstein R, Schmidt M. Optical 3D position sensor for the fast tracking of light sources Physics Procedia. 5: 437-445. DOI: 10.1016/J.Phpro.2010.08.071 |
0.333 |
|
| 2010 |
Pitz I, Otto A, Schmidt M. Simulation of the laser beam forming process with Moving Meshes for large aluminium plates Physics Procedia. 5: 363-369. DOI: 10.1016/J.Phpro.2010.08.063 |
0.416 |
|
| 2010 |
Koch H, Leitz K, Otto A, Schmidt M. Laser deep penetration welding simulation based on a wavelength dependent absorption model Physics Procedia. 5: 309-315. DOI: 10.1016/J.Phpro.2010.08.057 |
0.443 |
|
| 2010 |
Weigl M, Schmidt M. Influence of the feed rate and the lateral beam displacement on the joining quality of laser-welded copper-stainless steel connections Physics Procedia. 5: 53-59. DOI: 10.1016/J.Phpro.2010.08.029 |
0.394 |
|
| 2010 |
Schmidt M, Kolleck R, Grimm A, Veit R, Bartkowiak K. Direct laser deposition of Cu alloy on forming tool surfaces - Process window and mechanical properties Cirp Annals - Manufacturing Technology. 59: 211-214. DOI: 10.1016/J.Cirp.2010.03.071 |
0.402 |
|
| 2010 |
Pitz I, Otto A, Schmidt M. Meshing strategies for the efficient computation of laser beam forming processes on large aluminium plates International Journal of Material Forming. 3: 895-898. DOI: 10.1007/S12289-010-0912-Z |
0.407 |
|
| 2009 |
Zam A, Stelzle F, Nkenke E, Tangermann-Gerk K, Schmidt M, Adler W, Douplik A. Tissue-Specific Laser Surgery: Hard Tissue Differentiation by Diffuse Reflectance Spectroscopy ex vivo Frontiers in Optics. DOI: 10.1364/Fio.2009.Fthp2 |
0.308 |
|
| 2009 |
Von Wilmonsky C, Lutz R, Meisel U, Srour S, Rupprecht S, Toyoshima T, Nkenke E, Schlegel KA, Pohle D, Münstedt H, Rechtenwald T, Schmidt M. In vivo evaluation of B-TCP containing 3D laser sintered poly(ether ether ketone) composites in pigs Journal of Bioactive and Compatible Polymers. 24: 169-184. DOI: 10.1177/0883911508101149 |
0.317 |
|
| 2009 |
Govekar E, Jerič A, Weigl M, Schmidt M. Laser droplet generation: Application to droplet joining Cirp Annals-Manufacturing Technology. 58: 205-208. DOI: 10.1016/J.Cirp.2009.03.005 |
0.44 |
|
| 2009 |
Geiger M, Frick T, Schmidt M. Optical properties of plastics and their role for the modelling of the laser transmission welding process Production Engineering. 3: 49-55. DOI: 10.1007/S11740-008-0141-1 |
0.394 |
|
| 2008 |
von Wilmowsky C, Vairaktaris E, Pohle D, Rechtenwald T, Lutz R, Münstedt H, Koller G, Schmidt M, Neukam FW, Schlegel KA, Nkenke E. Effects of bioactive glass and beta-TCP containing three-dimensional laser sintered polyetheretherketone composites on osteoblasts in vitro. Journal of Biomedical Materials Research. Part A. 87: 896-902. PMID 18228252 DOI: 10.1002/Jbm.A.31822 |
0.335 |
|
| 2008 |
Bich A, Rieck J, Dumouchel C, Roth S, Weible KJ, Eisner M, Voelkel R, Zimmermann M, Rank M, Schmidt M, Bitterli R, Ramanan N, Ruffieux P, Scharf T, Noelf W, et al. Multifunctional micro-optical elements for laser beam homogenizing and beam shaping Proceedings of Spie - the International Society For Optical Engineering. 6879. DOI: 10.1117/12.762923 |
0.394 |
|
| 2008 |
Schmidt M, Otto A, Kägeler C. Analysis of YAG laser lap-welding of zinc coated steel sheets Cirp Annals-Manufacturing Technology. 57: 213-216. DOI: 10.1016/J.Cirp.2008.03.043 |
0.408 |
|
| 2008 |
Geiger M, Kägeler C, Schmidt M. High-power laser welding of contaminated steel sheets Production Engineering. 2: 235-240. DOI: 10.1007/S11740-008-0109-1 |
0.429 |
|
| 2007 |
Bechtold P, Schmidt M. Non-thermal Micro Adjustment Using Ultrashort Laser Pulses Journal of Laser Micro Nanoengineering. 2: 183-188. DOI: 10.2961/Jlmn.2007.03.0004 |
0.436 |
|
| 2007 |
Schmidt M, Dirscherl M, Rank M, Zimmermann M. Laser micro adjustment - From new basic process knowledge to the application Journal of Laser Applications. 19: 124-132. DOI: 10.2351/1.2567766 |
0.429 |
|
| 2007 |
Albert F, Mys I, Schmidt M. Laser-based rework in electronics production Proceedings of Spie. 6459: 645905. DOI: 10.1117/12.703125 |
0.404 |
|
| 2007 |
Schmidt M, Pohle D, Rechtenwald T. Selective laser sintering of PEEK Cirp Annals-Manufacturing Technology. 56: 205-208. DOI: 10.1016/J.Cirp.2007.05.097 |
0.405 |
|
| 2007 |
Pohle D, Ponader S, Rechtenwald T, Schmidt M, Schlegel KA, Münstedt H, Neukam FW, Nkenke E, Wilmowsky Cv. Processing of Three-Dimensional Laser Sintered Polyetheretherketone Composites and Testing of Osteoblast Proliferation in vitro Macromolecular Symposia. 253: 65-70. DOI: 10.1002/Masy.200750708 |
0.35 |
|
| 2006 |
Dirscherl M, Esser G, Schmidt M. Ultrashort Pulse Laser Bending Journal of Laser Micro Nanoengineering. 1: 54-60. DOI: 10.2961/Jlmn.2006.01.0011 |
0.448 |
|
| 2006 |
Mys I, Schmidt M. Laser micro welding of copper and aluminum Proceedings of Spie. 6107: 610703. DOI: 10.1117/12.648376 |
0.371 |
|
| 2006 |
Klämpfl F, Schmidt M, Hagenah H, Görtler A, Wolfsgruber F, Lampalzer R, Kaudewitz P. Irradiation planning for automated treatment of psoriasis with a high-power excimer laser Biomedical Optics. 6078: 61-69. DOI: 10.1117/12.646449 |
0.393 |
|
| 2005 |
Prechtl M, Schmidt M. Laser beam short pulse welding of metal foils Materialwissenschaft Und Werkstofftechnik. 36: 226-231. DOI: 10.1002/Mawe.200500865 |
0.433 |
|
| Show low-probability matches. |