Year |
Citation |
Score |
2019 |
Tripathi A, Dasrath D, Sun Z, Northrop W, Kittelson D, Stelson KA. Design and Control of a Controlled Trajectory Rapid Compression and Expansion Machine Ieee/Asme Transactions On Mechatronics. 24: 1711-1722. DOI: 10.1109/Tmech.2019.2917820 |
0.357 |
|
2019 |
Li M, Foss R, Stelson KA, ven JDVd, Barth EJ. Design, Dynamic Modeling, and Experimental Validation of A Novel Alternating Flow Variable Displacement Hydraulic Pump Ieee-Asme Transactions On Mechatronics. 24: 1294-1305. DOI: 10.1109/Tmech.2019.2906859 |
0.372 |
|
2017 |
Frosina E, Senatore A, Buono D, Stelson KA. A modeling approach to study the fluid dynamic forces acting on the spool of a flow control valve Journal of Fluids Engineering-Transactions of the Asme. 139: 11103. DOI: 10.1115/1.4034418 |
0.306 |
|
2015 |
Deppen TO, Alleyne AG, Meyer JJ, Stelson KA. Comparative Study of Energy Management Strategies for Hydraulic Hybrids Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 137. DOI: 10.1115/1.4028525 |
0.584 |
|
2015 |
Wang F, Stelson KA. An Efficient Fan Drive System Based on a Novel Hydraulic Transmission Ieee/Asme Transactions On Mechatronics. 20: 2234-2241. DOI: 10.1109/Tmech.2014.2370893 |
0.35 |
|
2014 |
Wang F, Bissen M, Ward W, Stelson K. Modeling and Design of a Hybrid Bicycle with Hydraulic Transmission International Journal of Fluid Power. 8: 99-106. DOI: 10.5739/Jfpsij.8.99 |
0.315 |
|
2013 |
Alleyne A, Deppen T, Meyer J, Stelson K. Enery management in Mobile Hydraulics Mechanical Engineering. 135: S4-S6. DOI: 10.1115/1.2013-Jun-5 |
0.557 |
|
2012 |
Deppen TO, Alleyne AG, Stelson KA, Meyer JJ. Sensitivity analysis of energy management strategies for hydraulic hybrid vehicles Asme 2012 5th Annual Dynamic Systems and Control Conference Joint With the Jsme 2012 11th Motion and Vibration Conference, Dscc 2012-Movic 2012. 1: 129-136. DOI: 10.1115/DSCC2012-MOVIC2012-8645 |
0.556 |
|
2012 |
Deppen TO, Alleyne AG, Stelson KA, Meyer JJ. Optimal energy use in a light weight hydraulic hybrid passenger vehicle Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 134. DOI: 10.1115/1.4006082 |
0.6 |
|
2011 |
Deppen TO, Alleyne AG, Stelson KA, Meyer JJ. Model predictive control of an electro-hydraulic powertrain with energy storage Asme 2011 Dynamic Systems and Control Conference and Bath/Asme Symposium On Fluid Power and Motion Control, Dscc 2011. 2: 225-232. DOI: 10.1115/DSCC2011-5969 |
0.571 |
|
2011 |
Wang Y, Sun Z, Stelson KA. Modeling, control, and experimental validation of a transient hydrostatic dynamometer Ieee Transactions On Control Systems Technology. 19: 1578-1586. DOI: 10.1109/Tcst.2010.2082542 |
0.406 |
|
2010 |
Deppen TO, Alleyne AG, Stelson KA, Meyer JJ. Predictive energy management for parallel hydraulic hybrid passenger vehicle Asme 2010 Dynamic Systems and Control Conference, Dscc2010. 2: 185-192. DOI: 10.1115/DSCC2010-4105 |
0.532 |
|
2007 |
Yu X, Rajamani R, Stelson KA, Cui T. Active control of sound transmission through windows with carbon nanotube-based transparent actuators Ieee Transactions On Control Systems Technology. 15: 704-714. DOI: 10.1109/Tcst.2006.890277 |
0.316 |
|
2007 |
Yu X, Zhu H, Rajamani R, Stelson KA. Acoustic transmission control using active panels: An experimental study of its limitations and possibilities Smart Materials and Structures. 16: 2006-2014. DOI: 10.1088/0964-1726/16/6/003 |
0.332 |
|
2004 |
Zhu H, Rajamani R, Stelson KA. Active control of sound reflection, absorption and transmission using thin panels Noise and Vibration Worldwide. 35: 8-20. DOI: 10.1260/0957456041643240 |
0.337 |
|
2004 |
Parthasarathy S, Mantell SC, Stelson KA. Estimation, control and optimization of curing in thick-sectioned composite parts Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 126: 824-833. DOI: 10.1115/1.1850536 |
0.368 |
|
2004 |
Zhu H, Yu X, Rajamani R, Stelson KA. Active control of glass panels for reduction of sound transmission through windows Mechatronics. 14: 805-819. DOI: 10.1016/J.Mechatronics.2004.03.001 |
0.327 |
|
2003 |
Zhu H, Rajamani R, Dudney J, Stelson KA. Active noise control using a distributed mode flat panel loudspeaker. Isa Transactions. 42: 475-84. PMID 12858980 DOI: 10.1016/S0019-0578(07)60148-7 |
0.342 |
|
2003 |
Zhu H, Rajamani R, Stelson KA. Active control of acoustic reflection, absorption, and transmission using thin panel speakers. The Journal of the Acoustical Society of America. 113: 852-70. PMID 12597180 DOI: 10.1121/1.1534834 |
0.34 |
|
2003 |
Zhu H, Stelson KA. Modeling and closed-loop control of stretch bending of aluminum rectangular tubes Journal of Manufacturing Science and Engineering, Transactions of the Asme. 125: 113-119. DOI: 10.1115/1.1536659 |
0.365 |
|
2001 |
Mei Y, Stelson KA. Lapping control of hard disk drive heads Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 123: 439-448. DOI: 10.1115/1.1386650 |
0.388 |
|
2001 |
Lou H, Stelson KA. Three-dimensional tube geometry control for rotary draw tube bending, part 1: Bend angle and overall tube geometry control Journal of Manufacturing Science and Engineering, Transactions of the Asme. 123: 258-265. DOI: 10.1115/1.1351813 |
0.37 |
|
1998 |
Sun WC, Mantell SC, Stelson KA. Modeling and control of the in-situ thermoplastic composite tape-laying process Journal of Dynamic Systems Measurement and Control-Transactions of the Asme. 120: 507-515. DOI: 10.1115/1.2801493 |
0.382 |
|
1997 |
Sun WC, Stelson KA. System identification and adaptive control of the multi-axis bending and twisting process Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 119: 782-789. DOI: 10.1115/1.2802391 |
0.356 |
|
1996 |
Luo JX, Joynt DL, Stelson KA. Control of the fabrication of long slender workpieces of arbitrary shape - Part II: Closed-loop control of the multi-axis bending process Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 118: 549-556. DOI: 10.1115/1.2801179 |
0.348 |
|
1995 |
Pan K, Stelson KA. On the Plastic Deformation of a Tube During Bending Journal of Engineering For Industry. 117: 494-500. DOI: 10.1115/1.2803526 |
0.323 |
|
1990 |
Ettouney OM, Stelson KA. Approximate model to calculate foldover and strains during cold upsetting of cylinders. Part I. Formulation and evaluation of the foldover model Journal of Engineering For Industry. 112: 260-266. DOI: 10.1115/1.2899584 |
0.31 |
|
1988 |
Pourboghrat F, Stelson KA. PRESSBRAKE BENDING IN THE PUNCH-SHEET CONTACT REGION - PART 2: GAP FORMATION AND THE DIRECTION OF SHEET MOTION Journal of Engineering For Industry. 110: 131-136. DOI: 10.1115/1.3187861 |
0.305 |
|
1988 |
Pourboghrat F, Stelson KA. PRESSBRAKE BENDING IN THE PUNCH-SHEET CONTACT REGION - PART 1: MODELING NONUNIFORMITIES Journal of Engineering For Industry. 110: 124-130. DOI: 10.1115/1.3187860 |
0.317 |
|
1983 |
Stelson KA. REAL TIME IDENTIFICATION OF WORKPIECE MATERIAL CHARACTERISTICS FROM MEASUREMENTS DURING BRAKEFORMING Journal of Engineering For Industry. 105: 45-53. DOI: 10.1115/1.3185863 |
0.327 |
|
1982 |
Stelson KA, Gossard DC. ADAPTIVE PRESSBRAKE CONTROL USING AN ELASTIC-PLASTIC MATERIAL MODEL Journal of Engineering For Industry. 104: 389-393. DOI: 10.1115/1.3185847 |
0.379 |
|
1982 |
Hardt DE, Roberts MA, Stelson KA. CLOSED-LOOP SHAPE CONTROL OF A ROLL-BENDING PROCESS. Journal of Dynamic Systems, Measurement and Control, Transactions of the Asme. 104: 317-322. DOI: 10.1115/1.3139715 |
0.35 |
|
Show low-probability matches. |