Year |
Citation |
Score |
2020 |
Arie MA, Hymas DM, Singer F, Shooshtari AH, Ohadi M. An additively manufactured novel polymer composite heat exchanger for dry cooling applications International Journal of Heat and Mass Transfer. 147: 118889. DOI: 10.1016/J.Ijheatmasstransfer.2019.118889 |
0.536 |
|
2017 |
Khanna S, McCluskey P, Bar-Cohen A, Yang B, Ohadi M. Thin Thermally Efficient ICECool Defense Semiconductor Power Amplifiers Journal of Microelectronics and Electronic Packaging. 14: 77-93. DOI: 10.4071/Imaps.456518 |
0.469 |
|
2017 |
Tang L, Ohadi MM, Johnson AT. Design Equations Of Flow Condensation In Smooth And Micro-Fin Tubes With Hcfc-22, Hfc-134A And Hfc-410 Refrigerants Journal of Enhanced Heat Transfer. 24: 85-100. DOI: 10.1615/Jenhheattransf.V24.I1-6.50 |
0.367 |
|
2017 |
Tang L, Ohadi MM, Johnson AT. Experimental Results Of Flow Condensation In Smooth And Micro-Fin Tubes With Hcfc-22, Hfc-134A And Hfc-410A Refrigerants Journal of Enhanced Heat Transfer. 24: 63-84. DOI: 10.1615/Jenhheattransf.V24.I1-6.40 |
0.348 |
|
2016 |
Andhare RS, Shooshtari A, Dessiatoun SV, Ohadi MM. Heat transfer and pressure drop characteristics of a flat plate manifold microchannel heat exchanger in counter flow configuration Applied Thermal Engineering. 96: 187-189. DOI: 10.1016/j.applthermaleng.2015.10.133 |
0.534 |
|
2016 |
Ganapathy H, Steinmayer S, Shooshtari A, Dessiatoun S, Ohadi MM, Alshehhi M. Process intensification characteristics of a microreactor absorber for enhanced CO2 capture Applied Energy. 162: 416-427. DOI: 10.1016/j.apenergy.2015.10.010 |
0.332 |
|
2015 |
Jha V, Dessiatoun S, Shooshtari A, Al-Hajri ES, Ohadi MM. Experimental characterization of a nickel alloy-based manifold-microgroove evaporator Heat Transfer Engineering. 36: 33-42. DOI: 10.1080/01457632.2014.906276 |
0.791 |
|
2015 |
Arie MA, Shooshtari AH, Dessiatoun SV, Al-Hajri E, Ohadi MM. Numerical modeling and thermal optimization of a single-phase flow manifold-microchannel plate heat exchanger International Journal of Heat and Mass Transfer. 81: 478-489. DOI: 10.1016/J.Ijheatmasstransfer.2014.10.022 |
0.819 |
|
2015 |
Ganapathy H, Shooshtari A, Dessiatoun S, Ohadi MM, Alshehhi M. Hydrodynamics and mass transfer performance of a microreactor for enhanced gas separation processes Chemical Engineering Journal. 266: 258-270. DOI: 10.1016/j.cej.2014.12.028 |
0.311 |
|
2014 |
Muthusubramanian K, Dessiatoun SV, Shooshtari AH, Ohadi MM. Velocity based defrost and frost inhibition of evaporator coils of heat pump Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 8. DOI: 10.1115/IMECE2014-39003 |
0.436 |
|
2013 |
Ganapathy H, Shooshtari A, Dessiatoun S, Alshehhi M, Ohadi MM. Experimental investigation of enhanced absorption of carbon dioxide in diethanolamine in a microreactor Asme 2013 11th International Conference On Nanochannels, Microchannels and Minichannels, Icnmm 2013. DOI: 10.1115/ICNMM2013-73162 |
0.309 |
|
2013 |
Boyea D, Shooshtari A, Dessiatoun SV, Ohadi MM. Heat transfer and pressure drop characteristics of a liquid cooled manifold-microgroove condenser Asme 2013 Heat Transfer Summer Conf. Collocated With the Asme 2013 7th Int. Conf. On Energy Sustainability and the Asme 2013 11th Int. Conf. On Fuel Cell Science, Engineering and Technology, Ht 2013. 3. DOI: 10.1115/HT2013-17781 |
0.502 |
|
2013 |
Al-Hajri E, Shooshtari AH, Dessiatoun S, Ohadi MM. Performance characterization of R134a and R245fa in a high aspect ratio microchannel condenser International Journal of Refrigeration. 36: 588-600. DOI: 10.1016/J.Ijrefrig.2012.10.007 |
0.813 |
|
2013 |
Ganapathy H, Al-Hajri E, Ohadi M. Mass transfer characteristics of gas–liquid absorption during Taylor flow in mini/microchannel reactors Chemical Engineering Science. 101: 69-80. DOI: 10.1016/J.Ces.2013.06.005 |
0.799 |
|
2013 |
Ganapathy H, Al-Hajri E, Ohadi MM. Phase field modeling of Taylor flow in mini/microchannels, Part I: Bubble formation mechanisms and phase field parameters Chemical Engineering Science. 94: 138-149. DOI: 10.1016/J.Ces.2013.01.049 |
0.8 |
|
2013 |
Ganapathy H, Al-Hajri E, Ohadi MM. Phase field modeling of Taylor flow in mini/microchannels, Part II: Hydrodynamics of Taylor flow Chemical Engineering Science. 94: 156-165. DOI: 10.1016/J.Ces.2013.01.048 |
0.78 |
|
2012 |
Ganapathy H, Shooshtari A, Choo K, Dessiatoun S, Alshehhi M, Ohadi MM. Numerical analysis of condensation of r134a in a single microchannel Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 2971-2980. DOI: 10.1115/IMECE2012-89707 |
0.461 |
|
2012 |
Arie MA, Shooshtari AH, Dessiatoun SV, Ohadi MM, Hajri EA. Simulation and thermal optimization of a manifold microchannel flat plate heat exchanger Asme International Mechanical Engineering Congress and Exposition, Proceedings (Imece). 7: 209-220. DOI: 10.1115/IMECE2012-88181 |
0.374 |
|
2011 |
Ganapathy H, Al-Hajri E, Ohadi MM. Numerical simulation of mass transfer characteristics in a taylor flow microreactor Asme 2011 9th International Conference On Nanochannels, Microchannels, and Minichannels, Icnmm 2011. 1: 685-695. DOI: 10.1115/ICNMM2011-58155 |
0.402 |
|
2011 |
Mandel RK, Ohadi MM, Shooshtari A, Dessiatoun SV. Thin film evaporation on microstructured surfaces - Application to cooling high heat flux electronics Annual Ieee Semiconductor Thermal Measurement and Management Symposium. 138-145. DOI: 10.1109/STHERM.2011.5767191 |
0.356 |
|
2011 |
Acharya B, Dessiatoun S, Shooshtari A, Fody J, Ohadi MM. Electrohydrodynamic (EHD) enhanced separation of fine liquid droplets from gas flows Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 6: 1447-1453. |
0.3 |
|
2011 |
Ganapathy H, Al-Hajri E, Ohadi MM. Phase field method for simulation of multiphase flow Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 6: 1309-1319. |
0.334 |
|
2011 |
Ganapathy H, Al-Hajri E, Ohadi MM. Analysis of Taylor flow in microchannels by the phase field method Asme 2011 International Mechanical Engineering Congress and Exposition, Imece 2011. 6: 527-537. |
0.338 |
|
2010 |
Foroughi P, Shooshtari A, Dessiatoun S, Ohadi MM. Experimental characterization of an electrohydrodynamic micropump for cryogenic spot cooling applications Heat Transfer Engineering. 31: 119-126. DOI: 10.1080/01457630903285377 |
0.712 |
|
2009 |
Kermani E, Dessiatoun S, Shooshtari A, Ohadi MM. Experimental investigation of heat transfer performance of a manifold microchannel heat sink for cooling of concentrated solar cells Proceedings - Electronic Components and Technology Conference. 453-459. DOI: 10.1109/ECTC.2009.5074053 |
0.483 |
|
2008 |
Foroughi P, Dessiatoun S, Shooshtari A, Ohadi MM. Experimental characterization of an EHD ion-drag micropump for cryogenic micro-pumping applications Asme International Mechanical Engineering Congress and Exposition, Proceedings. 8: 1779-1786. DOI: 10.1115/IMECE2007-42177 |
0.722 |
|
2008 |
Kuang G, Ohadi M, Dessiatoun S. Semi-Empirical Correlation of Gas Cooling Heat Transfer of Supercritical Carbon Dioxide in Microchannels Hvac&R Research. 14: 861-870. DOI: 10.1080/10789669.2008.10391044 |
0.506 |
|
2008 |
Rada M, Shooshtari A, Ohadi MM. Experimental and numeral simulation of meso-pumping of liquid nitrogen - Application to cryogenic spot cooling of sensors and detectors Sensors and Actuators, a: Physical. 148: 271-279. DOI: 10.1016/J.Sna.2008.08.008 |
0.585 |
|
2006 |
Baummer TB, Ohadi MM, Al-Hajri E, Dessiatoun SV. Forced convection boiling in microchannels for improved heat transfer Proceedings of the 4th International Conference On Nanochannels, Microchannels and Minichannels, Icnmm2006. 2006: 635-640. |
0.428 |
|
2005 |
Wu J, Ohadi MM, Dessiatoun S, Qi J. Experimental study on embedded-wire electrode for end-enhanced condensation in a shell/tube bundle heat exchanger American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 376: 311-315. DOI: 10.1115/IMECE2005-81815 |
0.442 |
|
2005 |
Shooshtari A, Chowdhury S, Ohadi M. Numerical Modeling of Dissociation-Injection Process for the Electrohydrodynamic Pumping Materials. 373-381. DOI: 10.1115/Imece2005-81391 |
0.579 |
|
2005 |
Tudor V, Ohadi MM. Control of frost accumulation on a horizontal cold plate using DC electric fields American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 376: 21-30. DOI: 10.1115/IMECE2005-79688 |
0.651 |
|
2005 |
Wu J, Ohadi MM, Dessiatoun S, Qi J. Use of printed circuit board as electrode in EHD-enhanced condensation experiments for a shell/tube bundle heat exchanger Proceedings of the Asme Summer Heat Transfer Conference. 2: 589-592. DOI: 10.1115/HT2005-72832 |
0.463 |
|
2005 |
Moghaddam S, Ohadi MM. Effect of electrode geometry on performance of an EHD thin-film evaporator Journal of Microelectromechanical Systems. 14: 978-986. DOI: 10.1109/JMEMS.2005.851812 |
0.615 |
|
2005 |
Foroughi P, Zhao Y, Lawler J, Ohadi MM. Development of electrohydrodynamic (EHD) micropumps for cryogenic applications Aip Conference Proceedings. 746: 46-54. DOI: 10.1063/1.1867117 |
0.71 |
|
2004 |
Zhao Y, Ohadi MM. Experimental study of supercritical CO 2 gas cooling in a microchannel gas cooler Ashrae Transactions. 110: 291-300. |
0.45 |
|
2004 |
Kuang G, Ohadi MM, Zhao Y. Experimental study on gas cooling heat transfer for supercritical CO 2 in microchannel Proceedings of the Second International Conference On Microchannels and Minichannels (Icmm2004). 325-332. |
0.442 |
|
2003 |
Rupani AP, Molki M, Ohadi MM, França FHR. Enhanced flow boiling of R-134a in a minichannel plate evaporator Journal of Enhanced Heat Transfer. 10: 1-7. DOI: 10.1615/JEnhHeatTransf.v10.i1.10 |
0.763 |
|
2003 |
Wu J, Ohadi MM, Thorpe S, Qi J. Electrohydrodynamically (EHD) augmented external condensation of R-134A in a tube bundle heat exchanger American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 374: 123-128. DOI: 10.1115/IMECE2003-42351 |
0.483 |
|
2003 |
Benetis V, Shooshtari A, Foroughi P, Ohadi MM. A source-integrated micropump for cooling of high heat flux electronics Annual Ieee Semiconductor Thermal Measurement and Management Symposium. 236-241. |
0.78 |
|
2003 |
Zhao Y, Ohadi MM, França FHR. Experimental heat transfer coefficients of CO2 in a microchannel evaporator Ashrae Transactions. 109: 533-541. |
0.472 |
|
2003 |
Tudor V, Ohadi MM, França FHR. An experimental investigation on frost control using DC and AC electric fields on a horizontal, downward-facing plate Hvac and R Research. 9: 203-213. |
0.622 |
|
2003 |
Zhao Y, Ohadi MM, França FHR. Experimental Heat Transfer Coefficients of CO 2 in a Microchannel Evaporator Ashrae Winter Meetings Cd, Technical and Symposium Papers. 2003: 527-535. |
0.511 |
|
2002 |
Gidwani A, Molki M, Ohadi MM. EHD-enhanced condensation of alternative refrigerants in smooth and corrugated tubes Hvac and R Research. 8: 219-238. DOI: 10.1080/10789669.2002.10391439 |
0.688 |
|
2002 |
Molki M, Ohadi MM, Da Silva LW. EHD-assisted condensation of refrigerant R-134a on tube bundles 8th Aiaa/Asme Joint Thermophysics and Heat Transfer Conference. |
0.744 |
|
2002 |
Zhao Y, Molki M, Ohadi MM, França FHR, Radermacher R, Mathur GD, Cho K. Flow boiling of CO2 with miscible oil in microchannels Ashrae Transactions. 108: 135-144. |
0.694 |
|
2001 |
Darabi J, Ohadi MM, DeVoe D. An electrohydrodynamic polarization micropump for electronic cooling Journal of Microelectromechanical Systems. 10: 98-106. DOI: 10.1109/84.911097 |
0.693 |
|
2001 |
Ohadi MM, Buckley SG. High temperature heat exchangers and microscale combustion systems: Applications to thermal system miniaturization Experimental Thermal and Fluid Science. 25: 207-217. DOI: 10.1016/S0894-1777(01)00069-3 |
0.354 |
|
2001 |
Rada M, Darabi J, Ohadi MM, Lawler J. Electrohydrodynamic pumping of liquid nitrogen using a mesoscale ion-drag pump Proceedings of the Intersociety Energy Conversion Engineering Conference. 2: 1137-1143. |
0.759 |
|
2001 |
Da Silva L, Molki M, Ohadi MM. Effect of polarity on electrohydrodynamic enhancement of R-134A condensation on enhanced tubes Proceedings of the National Heat Transfer Conference. 1: 431-437. |
0.708 |
|
2001 |
Zhao Y, Molki M, Ohadi MM. Predicting flow boiling heat transfer of CO2 in microchannels American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 369: 205-210. |
0.719 |
|
2000 |
Tang L, Ohadi MM, Johnson AT. Flow condensation in smooth and micro-fin tubes with HCFC-22, HFC-134a and HFC-410 refrigerants. Part II: design equations Journal of Enhanced Heat Transfer. 7: 311-325. DOI: 10.1615/Jenhheattransf.V7.I5.20 |
0.502 |
|
2000 |
Tang L, Ohadi MM, Johnson AT. Flow condensation in smooth and micro-fin tubes with HCFC-22, HFC-134a and HFC-410A refrigerants. Part I: experimental results Journal of Enhanced Heat Transfer. 7: 289-310. DOI: 10.1615/Jenhheattransf.V7.I5.10 |
0.513 |
|
2000 |
Darabi J, Ohadi MM, Dessiatoun SV. Augmentation of thin falling-film evaporation on horizontal tubes using an applied electric field Journal of Heat Transfer. 122: 391-398. DOI: 10.1115/1.521478 |
0.766 |
|
2000 |
Darabi J, Ohadi MM, Desiatoun SV. Falling film and spray evaporation enhancement using an applied electric field Journal of Heat Transfer. 122: 741-748. DOI: 10.1115/1.1288932 |
0.762 |
|
2000 |
Darabi J, Ohadi MM, Dessiatoun SV. Compound augmentation of pool boiling on three selected commercial tubes Journal of Enhanced Heat Transfer. 7: 347-360. |
0.762 |
|
2000 |
Molki M, Ohadi MM, Baumgarten B, Hasegawa M, Yabe A. Heat transfer enhancement of airflow in a channel using corona discharge Journal of Enhanced Heat Transfer. 7: 411-425. |
0.758 |
|
2000 |
Mo B, Ohadi MM, Dessiatoun SV, Wrenn KR. Capillary pumped-loop thermal performance improvement with electrohydrodynamic technique Journal of Thermophysics and Heat Transfer. 14: 103-108. |
0.429 |
|
2000 |
Da Silva LW, Molki M, Ohadi MM. Electrohydrodynamic enhancement of R-134a condensation on enhanced tubes Conference Record - Ias Annual Meeting (Ieee Industry Applications Society). 2: 757-764. |
0.745 |
|
2000 |
Nelson DA, Zia S, Whipple RL, Ohadi MM. Corona discharge effects on heat transfer and pressure drop in tube flows Journal of Enhanced Heat Transfer. 7: 81-95. |
0.41 |
|
2000 |
Zhao Y, Molki M, Ohadi MM. Heat transfer and pressure drop of CO2 flow boiling in microchannels American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 366: 243-249. |
0.758 |
|
1999 |
Cheung K, Ohadi MM, Dessiatoun SV. EHD-assisted external condensation of R-134a on smooth horizontal and vertical tubes International Journal of Heat and Mass Transfer. 42: 1747-1755. DOI: 10.1016/S0017-9310(98)00291-9 |
0.423 |
|
1999 |
Darabi J, Dessiatoun SV, Ohadi MM, Fanni MA, Kedzierski MA. Effect of heating boundary conditions on pool boiling experiments Hvac and R Research. 5: 283-296. |
0.736 |
|
1999 |
Mo B, Ohadi MM, Dessiatoun SV, Cheung KH. Startup time reduction in an electrohydrodynamically enhanced capillary pumped loop Journal of Thermophysics and Heat Transfer. 13: 134-139. |
0.409 |
|
1998 |
Ohadi MM, Li SS, Ansari AI. Heat transfer and pressure drop characteristics in an EHD-enhanced finned-tube gas-to-gas heat exchanger International Journal of Fluid Mechanics Research. 25: 656-661. DOI: 10.1615/Interjfluidmechres.V25.I4-6.180 |
0.547 |
|
1997 |
Salehi M, Ohadi MM, Dessiatoun S. EHD enhanced convective boiling of R-134a in grooved channels - Application to subcompact heat exchangers Journal of Heat Transfer. 119: 805-809. DOI: 10.1115/1.2824186 |
0.591 |
|
1997 |
Cheung K, Ohadi MM, Dessiatoun S, Singh A. EHD-enhanced boiling coefficients and visualization of R-134a over enhanced tubes Journal of Heat Transfer. 119: 332-338. |
0.456 |
|
1996 |
Singh A, Ohadi MM, Dessiatoun S. Flow boiling heat transfer coefficients of R-134a in a microfin tube Journal of Heat Transfer. 118: 497-499. DOI: 10.1115/1.2825877 |
0.542 |
|
1996 |
Ohadi MM, Li SS, Radermacher R, Dessiatoun S. Critical review of available correlations for two-phase flow heat transfer of ammonia International Journal of Refrigeration. 19: 272-284. DOI: 10.1016/0140-7007(95)00062-3 |
0.43 |
|
1996 |
Salehi M, Ohadi MM, Blanford M, Dessiatoun SV. A literature survey on available correlations for prediction of nucleate pool boiling heat transfer American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 338: 45-64. |
0.337 |
|
1996 |
Cheung K, Ohadi MM, Dessiatoun SV. Boiling heat transfer enhancement of R-134a in a tube bundle utilizing the EHD technique Journal of Enhanced Heat Transfer. 3: 301-309. |
0.466 |
|
1996 |
Shih TM, Ohadi MM, Liu W. Literature survey on numerical heat transfer (1992-1993) Numerical Heat Transfer; Part a: Applications. 29: 441-484. |
0.402 |
|
1995 |
Singh A, Ohadi MM, Dessiatoun S, Chu W. In-tube boiling heat transfer coefficients of R-123 and their enhancement using the EHD technique Journal of Enhanced Heat Transfer. 2: 209-217. DOI: 10.1615/Jenhheattransf.V2.I3.40 |
0.583 |
|
1995 |
Darabi J, Salehi M, Saeedi MH, Ohadi MM. Review of available correlations for prediction of flow boiling heat transfer in smooth and augmented tubes Ashrae Transactions. 965-975. |
0.735 |
|
1995 |
Ohadi MM, Salehi M, Dessiatoun S. EHD-enhanced convective boiling of R-134a in grooved channels - application to compact heat exchangers American Society of Mechanical Engineers, Heat Transfer Division, (Publication) Htd. 320: 15-21. |
0.511 |
|
1995 |
Singh A, Ohadi MM, Dessiatoun S. EHD-enhanced boiling of R-123 over commercially available enhanced tubes Journal of Heat Transfer. 117: 1070-1073. |
0.433 |
|
1995 |
Cheung KH, Ohadi MM, Dessiatoun S. Compound enhancement of boiling heat transfer of R-134a in a tube bundle Ashrae Transactions. 1009-1019. |
0.446 |
|
1995 |
Ohadi MM, Conklin JC. Advances in enhanced heat/mass transfer and energy efficiency. Proceedings of a conference, San Francisco, November 1995 . |
0.398 |
|
1994 |
Li SS, Ohadi MM, Dessiatoun S, Whipple RL. Experiments on electrode design optimization for EHD heat transfer enhancement in a tube-bundle, shell-and-tube heat exchanger American Society of Mechanical Engineers, Petroleum Division (Publication) Pd. 64: 165-171. |
0.499 |
|
1994 |
Ohadi MM, Li SS, Dessiatoun S. Electrostatic heat transfer enhancement in a tube bundle gas-to-gas heat exchanger Journal of Enhanced Heat Transfer. 1: 327-335. |
0.447 |
|
1994 |
Li SS, Ohadi MM, Ansari AI. Control of EHD heat transfer enhancement rates in a tube-bundle gas-to-gas heat exchanger Ashrae Transactions. 100: 631-638. |
0.449 |
|
1993 |
Shih T, Ohadi MM. Literature Survey On Numerical Heat Transfer (1990-1991) Numerical Heat Transfer Part a-Applications. 23: 129-169. DOI: 10.1080/10407789308913666 |
0.468 |
|
1993 |
Papar RA, Ohadi MM, Kumar A, Ansari AI. Effect of electrode geometry on EHD-enhanced boiling of R-123/oil mixture Ashrae Transactions. 99: 1237-1243. |
0.352 |
|
1993 |
Singh A, Kumar A, Dessiatoun S, Faani MA, Ohadi MM, Ansari AI. Compound EHD-enhanced pool boiling of R-123 in a liquid-to-refrigerant heat exchanger American Society of Mechanical Engineers (Paper). 1-6. |
0.473 |
|
1993 |
Ohadi MM, Cheng KL. Modeling of temperature distributions in the workpiece during abrasive waterjet machining Journal of Heat Transfer. 115: 446-452. |
0.324 |
|
1992 |
Ohadi MM, Papar RA, Ng TL, Faani MA, Radermacher R. EHD enhancement of shell-side boiling heat transfer coefficients of R-123/oil mixture Ashrae Transactions. 98: 427-434. |
0.392 |
|
1992 |
Ohadi MM, Papar RA, Kumar A, Ansari AI. Some observations on EHD-enhanced boiling of R-123 in the presence of oil contamination . 387-396. |
0.327 |
|
1991 |
Ohadi MM, Sharaf N, Nelson DA. Electrohydrodynamic enhancement of heat transfer in a shell-and tube heat exchanger Experimental Heat Transfer. 4: 19-39. DOI: 10.1080/08916159108946403 |
0.472 |
|
1991 |
Ohadi MM, Nelson DA, Zia S. Heat transfer enhancement of laminar and turbulent pipe flow via corona discharge International Journal of Heat and Mass Transfer. 34: 1175-1187. DOI: 10.1016/0017-9310(91)90026-B |
0.437 |
|
1991 |
Ohadi MM. Heat transfer enhancement in heat exchangers Ashrae Journal. 33. |
0.413 |
|
1990 |
Nelson DA, Ohadi MM, Zia S, Whipple RL. Electrostatic effects on pressure drop in tube flows International Journal of Heat and Fluid Flow. 11: 298-302. DOI: 10.1016/0142-727X(90)90053-E |
0.48 |
|
1990 |
Ohadi MM, Sparrow EM. Effect of a 180° bend on heat transfer in a downstream positioned straight tube International Journal of Heat and Mass Transfer. 33: 1359-1362. DOI: 10.1016/0017-9310(90)90265-V |
0.538 |
|
1990 |
Ohadi MM, Sparrow EM, Walavalkar A, Ansari AI. Pressure drop characteristics for turbulent flow in a straight circular tube situated downstream of a bend International Journal of Heat and Mass Transfer. 33: 583-591. DOI: 10.1016/0017-9310(90)90157-P |
0.485 |
|
1989 |
Ohadi MM, Sparrow EM. Heat transfer in a straight tube situated downstream of a bend International Journal of Heat and Mass Transfer. 32: 201-212. DOI: 10.1016/0017-9310(89)90168-3 |
0.595 |
|
1989 |
Nelson DA, Ohadi MM, Whipple RL, Zia S, Ansari A. Effects of corona discharge on forced convection in tubes: Pressure drop results Conference Record - Ias Annual Meeting (Ieee Industry Applications Society). 2090-2093. |
0.427 |
|
1988 |
Ohadi MM, Ansari AI, Hashish M. Experimental study of the role of thermal energy transfer in material removal processes using abrasive waterjets American Society of Mechanical Engineers, Fluids Engineering Division (Publication) Fed. 75: 153-160. |
0.317 |
|
1987 |
Sparrow EM, Ohadi MM. COMPARISON OF TURBULENT THERMAL ENTRANCE REGIONS FOR PIPE FLOWS WITH DEVELOPED VELOCITY AND VELOCITY DEVELOPING FROM A SHARP-EDGED INLET Journal of Heat Transfer. 109: 1028-1030. DOI: 10.1115/1.3248175 |
0.509 |
|
1987 |
Sparrow EM, Ohadi MM. Numerical and experimental studies of turbulent heat transfer in a tube Numerical Heat Transfer. 11: 461-476. DOI: 10.1080/10407788708913565 |
0.521 |
|
Show low-probability matches. |