| Year |
Citation |
Score |
| 2023 |
Singh S, Berndt CC, Singh Raman RK, Singh H, Ang ASM. Applications and Developments of Thermal Spray Coatings for the Iron and Steel Industry. Materials (Basel, Switzerland). 16. PMID 36676253 DOI: 10.3390/ma16020516 |
0.429 |
|
| 2022 |
Pham DQ, Gangadoo S, Berndt CC, Chapman J, Zhai J, Vasilev K, Truong VK, Ang ASM. Antibacterial Longevity of a Novel Gallium Liquid Metal/Hydroxyapatite Composite Coating Fabricated by Plasma Spray. Acs Applied Materials & Interfaces. PMID 35416647 DOI: 10.1021/acsami.2c03695 |
0.512 |
|
| 2021 |
Pham DQ, Berndt CC, Cizek J, Gbureck U, Zreiqat H, Lu Z, Ang ASM. Baghdadite coating formed by hybrid water-stabilized plasma spray for bioceramic applications: Mechanical and biological evaluations. Materials Science & Engineering. C, Materials For Biological Applications. 122: 111873. PMID 33641891 DOI: 10.1016/j.msec.2021.111873 |
0.539 |
|
| 2021 |
Meghwal A, Berndt CC, Luzin V, Schulz C, Crowe T, Gabel H, Ang AS. Mechanical performance and residual stress of WC-Co coatings manufactured by Kinetic Metallization™ Surface and Coatings Technology. 421: 127359. DOI: 10.1016/J.SURFCOAT.2021.127359 |
0.368 |
|
| 2021 |
Javed M, Ang A, Bhadra C, Piola R, Neil W, Berndt C, Leigh M, Howse H, Wade S. Corrosion and mechanical performance of HVOF WC-based coatings with alloyed nickel binder for use in marine hydraulic applications Surface and Coatings Technology. 418: 127239. DOI: 10.1016/J.SURFCOAT.2021.127239 |
0.395 |
|
| 2021 |
Kahl B, Berndt C, Ang A. Boride-based ultra-high temperature ceramic coatings deposited via controlled atmosphere plasma spray Surface and Coatings Technology. 416: 127128. DOI: 10.1016/J.SURFCOAT.2021.127128 |
0.442 |
|
| 2021 |
Fardan A, Berndt CC, Ahmed R. Numerical modelling of particle impact and residual stresses in cold sprayed coatings: A review Surface and Coatings Technology. 409: 126835. DOI: 10.1016/J.SURFCOAT.2021.126835 |
0.352 |
|
| 2021 |
Matthews S, Ansbro J, Berndt C, Ang A. Carbide dissolution in WC-17Co thermal spray coatings: Part 1-project concept and as-sprayed coatings Journal of Alloys and Compounds. 856: 157464. DOI: 10.1016/j.jallcom.2020.157464 |
0.479 |
|
| 2021 |
Matthews S, Ansbro J, Berndt C, Ang A. Thermally induced metallurgical transformations in WC-17Co thermal spray coatings as a function of carbide dissolution: Part 2 - Heat-treated coatings International Journal of Refractory Metals and Hard Materials. 96: 105486. DOI: 10.1016/J.IJRMHM.2021.105486 |
0.444 |
|
| 2021 |
Ahmed R, Ali O, Berndt CC, Fardan A. Sliding Wear of Conventional and Suspension Sprayed Nanocomposite WC-Co Coatings: An Invited Review Journal of Thermal Spray Technology. 30: 800-861. DOI: 10.1007/s11666-021-01185-z |
0.53 |
|
| 2020 |
Meghwal A, Anupam A, Luzin V, Schulz C, Hall C, Murty BS, Kottada RS, Berndt CC, Ang ASM. Multiscale mechanical performance and corrosion behaviour of plasma sprayed AlCoCrFeNi high-entropy alloy coatings Journal of Alloys and Compounds. 157140. DOI: 10.1016/J.Jallcom.2020.157140 |
0.51 |
|
| 2020 |
Anupam A, Kottada RS, Kashyap S, Meghwal A, Murty BS, Berndt CC, Ang ASM. Understanding the microstructural evolution of high entropy alloy coatings manufactured by atmospheric plasma spray processing Applied Surface Science. 505: 144117. DOI: 10.1016/J.Apsusc.2019.144117 |
0.521 |
|
| 2020 |
Meghwal A, Anupam A, Murty BS, Berndt CC, Kottada RS, Ang ASM. Thermal Spray High-Entropy Alloy Coatings: A Review Journal of Thermal Spray Technology. 29: 857-893. DOI: 10.1007/S11666-020-01047-0 |
0.609 |
|
| 2019 |
Pham DQ, Berndt CC, Sadeghpour A, Zreiqat H, Wang P, Ang ASM. Mechanical Properties of Strontium–Hardystonite–Gahnite Coating Formed by Atmospheric Plasma Spray The Coatings. 9: 759. DOI: 10.3390/Coatings9110759 |
0.61 |
|
| 2019 |
Pham DQ, Berndt CC, Gbureck U, Zreiqat H, Truong VK, Ang ASM. Mechanical and chemical properties of Baghdadite coatings manufactured by atmospheric plasma spraying Surface & Coatings Technology. 378: 124945. DOI: 10.1016/J.Surfcoat.2019.124945 |
0.618 |
|
| 2018 |
Sheng Y, Hua Y, Wang X, Zhao X, Chen L, Zhou H, Wang J, Berndt CC, Li W. Application of High-Density Electropulsing to Improve the Performance of Metallic Materials: Mechanisms, Microstructure and Properties. Materials (Basel, Switzerland). 11. PMID 29364844 DOI: 10.3390/Ma11020185 |
0.321 |
|
| 2018 |
Ang A, Ahmed R, Berndt CC. Biomaterials: Thermal Spray Processes and Applications Journal of Thermal Spray Technology. 27: 1205-1211. DOI: 10.1007/S11666-018-0808-X |
0.402 |
|
| 2017 |
Azadmanjiri J, Wang J, Berndt CC, Kapoor A, Zhu M, Ang ASM, Srivastava VK. Influence of charged defects on the interfacial bonding strength of tantalum- and silver-doped nanograined TiO2. Physical Chemistry Chemical Physics : Pccp. PMID 28435943 DOI: 10.1039/C7Cp02000G |
0.427 |
|
| 2017 |
Azadmanjiri J, Wang J, Berndt CC, Kapoor A, Zhu DM, Ang ASM, Srivastava VK. Tantalum- and Silver-Doped Titanium Dioxide Nanosheets Film: Influence on Interfacial Bonding Structure and Hardness of the Surface System Industrial & Engineering Chemistry Research. 56: 434-439. DOI: 10.1021/Acs.Iecr.6B03557 |
0.399 |
|
| 2017 |
Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, et al. Erratum to: The 2016 Thermal Spray Roadmap Journal of Thermal Spray Technology. 26: 985-986. DOI: 10.1007/S11666-017-0560-7 |
0.421 |
|
| 2017 |
Azadmanjiri J, Wang J, Berndt CC, Wen C, Srivastava VK, Kapoor A. Structural and mechanical properties of magnetron-sputtered Al–Au thin films Applied Physics A. 123: 1-8. DOI: 10.1007/S00339-016-0708-1 |
0.323 |
|
| 2016 |
Ang ASM, Howse H, Wade SA, Berndt CC. Manufacturing of nickel based cermet coatings by the HVOF process Surface Engineering. 32: 713-724. DOI: 10.1179/1743294415Y.0000000031 |
0.561 |
|
| 2016 |
Azadmanjiri J, Berndt CC, Wang J, Kapoor A, Srivastava VK. Nanolaminated composite materials: structure, interface role and applications Rsc Advances. 6: 109361-109385. DOI: 10.1039/C6Ra20050H |
0.342 |
|
| 2016 |
Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Berghaus JO, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, et al. The 2016 Thermal Spray Roadmap Journal of Thermal Spray Technology. 25: 1376-1440. DOI: 10.1007/S11666-016-0473-X |
0.405 |
|
| 2016 |
Ang ASM, Howse H, Wade SA, Berndt CC. Development of Processing Windows for HVOF Carbide-Based Coatings Journal of Thermal Spray Technology. 25: 28-35. DOI: 10.1007/S11666-015-0318-Z |
0.557 |
|
| 2015 |
Minagar S, Berndt CC, Wen C. Fabrication and Characterization of Nanoporous Niobia, and Nanotubular Tantala, Titania and Zirconia via Anodization. Journal of Functional Biomaterials. 6: 153-70. PMID 25837724 DOI: 10.3390/Jfb6020153 |
0.353 |
|
| 2015 |
Minagar S, Li Y, Berndt CC, Wen C. The influence of titania-zirconia-zirconium titanate nanotube characteristics on osteoblast cell adhesion. Acta Biomaterialia. 12: 281-9. PMID 25448349 DOI: 10.1016/J.Actbio.2014.10.037 |
0.338 |
|
| 2015 |
Sanpo N, Tharajak J, Wang J, Berndt CC. Surface Investigation of Laser Glazed Mullite Thin Films on Yttria-Stabilized Zirconia Coatings Applied Mechanics and Materials. 804: 104-107. DOI: 10.4028/Www.Scientific.Net/Amm.804.104 |
0.474 |
|
| 2015 |
Gan JA, Berndt CC. Nanocomposite coatings: thermal spray processing, microstructure and performance International Materials Reviews. 60: 195-244. DOI: 10.1179/1743280414Y.0000000048 |
0.558 |
|
| 2015 |
Azadmanjiri J, Berndt CC, Kapoor A, Wen C. Development of Surface Nano-Crystallization in Alloys by Surface Mechanical Attrition Treatment (SMAT) Critical Reviews in Solid State and Materials Sciences. 40: 164-181. DOI: 10.1080/10408436.2014.978446 |
0.354 |
|
| 2015 |
Choudhury TA, Berndt CC, Man Z. Modular implementation of artificial neural network in predicting in-flight particle characteristics of an atmospheric plasma spray process Engineering Applications of Artificial Intelligence. 45: 57-70. DOI: 10.1016/J.Engappai.2015.06.015 |
0.352 |
|
| 2015 |
Hasan MF, Wang J, Berndt C. Determination of the mechanical properties of plasma-sprayed hydroxyapatite coatings using the Knoop Indentation Technique Journal of Thermal Spray Technology. 24: 865-877. DOI: 10.1007/S11666-015-0228-0 |
0.456 |
|
| 2015 |
Ang ASM, Berndt CC, Sesso ML, Anupam A, S P, Kottada RS, Murty BS. Plasma-Sprayed High Entropy Alloys: Microstructure and Properties of AlCoCrFeNi and MnCoCrFeNi Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 46: 791-800. DOI: 10.1007/S11661-014-2644-Z |
0.584 |
|
| 2014 |
Minagar S, Berndt CC, Gengenbach T, Wen C. Fabrication and characterization of TiO-ZrO-ZrTiO nanotubes on TiZr alloy manufactured via anodization. Journal of Materials Chemistry. B. 2: 71-83. PMID 32261300 DOI: 10.1039/C3Tb21204A |
0.335 |
|
| 2014 |
Mediaswanti K, Wen CE, Ivanova EP, Malherbe F, Berndt CC, Pham VTH, Wang J. Biomimetic Creation of Surfaces on Porous Titanium for Biomedical Applications Advanced Materials Research. 896: 259-262. DOI: 10.4028/Www.Scientific.Net/Amr.896.259 |
0.382 |
|
| 2014 |
Mediaswanti K, Wen C, Ivanova EP, Berndt CC, Pham VTH, Malherbe F, Wang J. Investigation of bacterial attachment on hydroxyapatite-coated titanium and tantalum International Journal of Surface Science and Engineering. 8: 255-263. DOI: 10.1504/Ijsurfse.2014.060489 |
0.497 |
|
| 2014 |
Ang ASM, Berndt CC. A review of testing methods for thermal spray coatings International Materials Reviews. 59: 179-223. DOI: 10.1179/1743280414Y.0000000029 |
0.609 |
|
| 2014 |
Sesso ML, Berndt CC, Wong YC. Topographical and Microstructural Property Evolution of Air Plasma‐Sprayed Zirconia Thermal Barrier Coatings Journal of the American Ceramic Society. 97: 1218-1225. DOI: 10.1111/Jace.12842 |
0.625 |
|
| 2014 |
Azadmanjiri J, Berndt CC, Wang J, Kapoor A, Srivastava VK, Wen C. A review on hybrid nanolaminate materials synthesized by deposition techniques for energy storage applications Journal of Materials Chemistry A. 2: 3695-3708. DOI: 10.1039/C3Ta14034B |
0.306 |
|
| 2014 |
Ang ASM, Berndt CC. Investigating the anisotropic mechanical properties of plasma sprayed yttria-stabilised zirconia coatings Surface and Coatings Technology. 259: 551-559. DOI: 10.1016/J.Surfcoat.2014.10.031 |
0.604 |
|
| 2014 |
Hasan F, Wang J, Berndt C. Evaluation of the mechanical properties of plasma sprayed hydroxyapatite coatings Applied Surface Science. 303: 155-162. DOI: 10.1016/J.Apsusc.2014.02.125 |
0.544 |
|
| 2014 |
Xie W, Wang J, Berndt CC. Analysis of EMAA Splats on Glass and Mild Steel Substrates Journal of Thermal Spray Technology. 23: 317-324. DOI: 10.1007/S11666-013-9989-5 |
0.622 |
|
| 2014 |
Sanpo N, Tharajak J, Li Y, Berndt CC, Wen C, Wang J. Biocompatibility of transition metal-substituted cobalt ferrite nanoparticles Journal of Nanoparticle Research. 16: 1-13. DOI: 10.1007/S11051-014-2510-3 |
0.305 |
|
| 2013 |
Minagar S, Wang J, Berndt CC, Ivanova EP, Wen C. Cell response of anodized nanotubes on titanium and titanium alloys. Journal of Biomedical Materials Research. Part A. 101: 2726-39. PMID 23436766 DOI: 10.1002/Jbm.A.34575 |
0.319 |
|
| 2013 |
Sanpo N, Berndt CC, Wen C, Wang J. Transition metal-substituted cobalt ferrite nanoparticles for biomedical applications. Acta Biomaterialia. 9: 5830-7. PMID 23137676 DOI: 10.1016/J.Actbio.2012.10.037 |
0.318 |
|
| 2013 |
Mediaswanti K, Wen C, Ivanova E, Berndt C, Malherbe F, Pham, Wang J. A review on bioactive porous metallic biomaterials Journal of Biomimetics, Biomaterials, and Tissue Engineering. 18: 1-8. DOI: 10.4172/1662-100X.1000104 |
0.308 |
|
| 2013 |
Mansur MR, Wang J, Berndt CC. Hydroxyapatite and Titanium Composite Coatings on Austenitic Stainless Steel Substrates Using Direct Material Deposition Materials Science Forum. 602-615. DOI: 10.4028/Www.Scientific.Net/Msf.773-774.602 |
0.532 |
|
| 2013 |
Hasan F, Wang J, Berndt CC. A Taguchi Design Study for Optimisation of Plasma Sprayed Hydroxyapatite Coatings Materials Science Forum. 590-601. DOI: 10.4028/Www.Scientific.Net/Msf.773-774.590 |
0.534 |
|
| 2013 |
Sanpo N, Wang J, Berndt CC. Sol-Gel Synthesized Copper-Substituted Cobalt Ferrite Nanoparticles for Biomedical Applications Journal of Nano Research. 22: 95-106. DOI: 10.4028/Www.Scientific.Net/Jnanor.22.95 |
0.322 |
|
| 2013 |
Xie W, Wang J, Berndt CC. Ethylene Methacrylic Acid (EMAA) Single Splat Morphology The Coatings. 3: 82-97. DOI: 10.3390/Coatings3020082 |
0.495 |
|
| 2013 |
Hasan MF, Wang J, Berndt CC. Effect of power and stand-off distance on plasma sprayed hydroxyapatite coatings Materials and Manufacturing Processes. 28: 1279-1285. DOI: 10.1080/10426914.2013.811730 |
0.574 |
|
| 2013 |
Mansur MR, Wang J, Berndt CC. Microstructure, composition and hardness of laser-assisted hydroxyapatite and Ti-6Al-4V composite coatings Surface & Coatings Technology. 232: 482-488. DOI: 10.1016/J.Surfcoat.2013.06.006 |
0.541 |
|
| 2013 |
Gan JA, Berndt CC. Effects of standoff distance on porosity, phase distribution and mechanical properties of plasma sprayed Nd-Fe-B coatings Surface & Coatings Technology. 216: 127-138. DOI: 10.1016/J.Surfcoat.2012.11.040 |
0.47 |
|
| 2013 |
Sanpo N, Wang J, Ang ASM, Berndt CC. Influence of the different organic chelating agents on the topography, physical properties and phase of SPPS-deposited spinel ferrite splats Applied Surface Science. 284: 171-178. DOI: 10.1016/J.Apsusc.2013.07.075 |
0.3 |
|
| 2013 |
Ang ASM, Sanpo N, Sesso ML, Kim SY, Berndt CC. Thermal Spray Maps: Material Genomics of Processing Technologies Journal of Thermal Spray Technology. 22: 1170-1183. DOI: 10.1007/S11666-013-9970-3 |
0.506 |
|
| 2013 |
Gan JA, Berndt CC. Review on the Oxidation of Metallic Thermal Sprayed Coatings: A Case Study with Reference to Rare-Earth Permanent Magnetic Coatings Journal of Thermal Spray Technology. 22: 1069-1091. DOI: 10.1007/S11666-013-9955-2 |
0.444 |
|
| 2013 |
Gan JA, Berndt CC, Wong YC, Wang J. Void Formation and Spatial Distribution in Plasma Sprayed Nd-Fe-B Coatings Journal of Thermal Spray Technology. 22: 337-344. DOI: 10.1007/S11666-012-9819-1 |
0.576 |
|
| 2013 |
Gan JA, Berndt CC. Quantification and Taxonomy of Pores in Thermal Spray Coatings by Image Analysis and Stereology Approach Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science. 44: 4844-4858. DOI: 10.1007/S11661-013-1818-4 |
0.466 |
|
| 2013 |
Sanpo N, Berndt CC, Ang ASM, Wang J. Effect of the chelating agent contents on the topography, composition and phase of SPPS-deposited cobalt ferrite splats Surface & Coatings Technology. 232: 247-253. DOI: 10.1007/978-3-319-07025-4_5 |
0.306 |
|
| 2012 |
Minagar S, Berndt CC, Wang J, Ivanova E, Wen C. A review of the application of anodization for the fabrication of nanotubes on metal implant surfaces. Acta Biomaterialia. 8: 2875-88. PMID 22542885 DOI: 10.1016/J.Actbio.2012.04.005 |
0.308 |
|
| 2012 |
Mediaswanti K, Truong VK, Hasan J, Ivanova EP, Malherbe F, Berndt CC, Wen C, Wang J. Influence of titanium alloying element substrata on bacterial adhesion Advanced Materials Research. 535: 992-995. DOI: 10.4028/Www.Scientific.Net/Amr.535-537.992 |
0.328 |
|
| 2012 |
Sanpo N, Wang J, Berndt CC. Effect of Zinc Substitution on Microstructure and Antibacterial Properties of Cobalt Ferrite Nanopowders Synthesized by Sol-Gel Methods Advanced Materials Research. 436-439. DOI: 10.4028/Www.Scientific.Net/Amr.535-537.436 |
0.321 |
|
| 2012 |
Mediaswanti K, Wen C, Ivanova EP, Berndt CC, Malherbe F, Wang J. Biological performances of titanium scaffolds: a review Advanced Materials Research. 1634-1637. DOI: 10.4028/Www.Scientific.Net/Amr.535-537.1634 |
0.307 |
|
| 2012 |
Xie W, Wang J, Berndt CC. Spreading Behavior and Morphology of Ethylene Methacrylic Acid (EMAA) Deposits via the Flame Spray Process The Coatings. 2: 76-93. DOI: 10.3390/Coatings2020076 |
0.485 |
|
| 2012 |
Ang ASM, Berndt CC, Dunn M, Sesso ML, Kim SY. Modeling the Coverage of Splat Areas Arising from Thermal Spray Processes Journal of the American Ceramic Society. 95: 1572-1580. DOI: 10.1111/J.1551-2916.2012.05113.X |
0.476 |
|
| 2012 |
Sanpo N, Berndt CC, Wang J. Microstructural and antibacterial properties of zinc-substituted cobalt ferrite nanopowders synthesized by sol-gel methods Journal of Applied Physics. 112: 84333. DOI: 10.1063/1.4761987 |
0.322 |
|
| 2011 |
Saber-Samandari S, Berndt CC, Gross KA. Selection of the implant and coating materials for optimized performance by means of nanoindentation. Acta Biomaterialia. 7: 874-81. PMID 20883836 DOI: 10.1016/J.Actbio.2010.09.023 |
0.546 |
|
| 2011 |
Alamara K, Saber-Samandari S, Stoddart PR, Berndt CC. Effect of substrate temperature on the splat formation of flame sprayed polypropylene Surface & Coatings Technology. 206: 1180-1187. DOI: 10.1016/J.Surfcoat.2011.08.020 |
0.482 |
|
| 2011 |
Alamara K, Saber-Samandari S, Berndt CC. Splat taxonomy of polymeric thermal spray coating Surface & Coatings Technology. 205: 5028-5034. DOI: 10.1016/J.Surfcoat.2011.05.002 |
0.554 |
|
| 2011 |
Choudhury TA, Hosseinzadeh N, Berndt CC. Artificial Neural Network application for predicting in-flight particle characteristics of an atmospheric plasma spray process Surface and Coatings Technology. 205: 4886-4895. DOI: 10.1016/J.Surfcoat.2011.04.099 |
0.521 |
|
| 2011 |
Gan JA, Berndt CC. Design and manufacture of Nd-Fe-B thick coatings by the thermal spray process Surface & Coatings Technology. 205: 4697-4704. DOI: 10.1016/J.Surfcoat.2011.04.034 |
0.528 |
|
| 2011 |
Ang ASM, Berndt CC, Cheang P. Deposition effects of WC particle size on cold sprayed WC-Co coatings Surface & Coatings Technology. 205: 3260-3267. DOI: 10.1016/J.Surfcoat.2010.11.045 |
0.625 |
|
| 2011 |
Kanta AF, Montavon G, Berndt CC, Planche MP, Coddet C. Intelligent system for prediction and control: Application in plasma spray process Expert Systems With Applications. 38: 260-271. DOI: 10.1016/J.Eswa.2010.06.056 |
0.364 |
|
| 2010 |
Bazaka K, Jacob MV, Truong VK, Wang F, Pushpamali WA, Wang JY, Ellis AV, Berndt CC, Crawford RJ, Ivanova EP. Plasma-enhanced synthesis of bioactive polymeric coatings from monoterpene alcohols: a combined experimental and theoretical study. Biomacromolecules. 11: 2016-26. PMID 20590150 DOI: 10.1021/Bm100369N |
0.423 |
|
| 2010 |
Saber-Samandari S, Berndt CC. IFTHSE Global 21: heat treatment and surface engineering in the twenty-first century Part 10 – Thermal spray coatings: a technology review International Heat Treatment and Surface Engineering. 4: 7-13. DOI: 10.1179/174951410X12572442577381 |
0.335 |
|
| 2010 |
Choudhury TA, Hosseinzadeh N, Berndt CC. Using artificial neural network to predict the particle characteristics of an atmospheric plasma spray process Icece 2010 - 6th International Conference On Electrical and Computer Engineering. 726-729. DOI: 10.1109/ICELCE.2010.5700795 |
0.434 |
|
| 2010 |
Alamara K, Saber-Samandari S, Berndt CC. Splat formation of polypropylene flame sprayed onto a flat surface Surface & Coatings Technology. 205: 2518-2524. DOI: 10.1016/J.Surfcoat.2010.09.056 |
0.492 |
|
| 2010 |
Morks MF, Berndt CC, Durandet Y, Brandt M, Wang J. Microscopic observation of laser glazed yttria-stabilized zirconia coatings Applied Surface Science. 256: 6213-6218. DOI: 10.1016/J.Apsusc.2010.03.143 |
0.479 |
|
| 2010 |
Morks MF, Berndt CC. Corrosion and oxidation properties of NiCr coatings sprayed in presence of gas shroud system Applied Surface Science. 256: 4322-4327. DOI: 10.1016/J.Apsusc.2010.02.024 |
0.559 |
|
| 2010 |
HERMAN H, SAMPATH S, BERNDT C. ChemInform Abstract: Thermal Spray Processing of Nickel Aluminides Cheminform. 29: no-no. DOI: 10.1002/CHIN.199838296 |
0.31 |
|
| 2008 |
Kanta A, Montavon G, Vardelle M, Planche M, Berndt CC, Coddet C. Artificial Neural Networks vs. Fuzzy Logic: Simple Tools to Predict and Control Complex Processes—Application to Plasma Spray Processes Journal of Thermal Spray Technology. 17: 365-376. DOI: 10.1007/S11666-008-9183-3 |
0.386 |
|
| 2007 |
Lins VFC, Branco JRT, Diniz FRC, Brogan JC, Berndt CC. Erosion behavior of thermal sprayed, recycled polymer and ethylene–methacrylic acid composite coatings Wear. 262: 274-281. DOI: 10.1016/J.Wear.2006.05.014 |
0.521 |
|
| 2007 |
Racek O, Berndt CC. Mechanical property variations within thermal barrier coatings Surface & Coatings Technology. 202: 362-369. DOI: 10.1016/J.Surfcoat.2007.05.091 |
0.823 |
|
| 2007 |
Ibrahim A, Lima RS, Berndt CC, Marple BR. Fatigue and mechanical properties of nanostructured and conventional titania (TiO2) thermal spray coatings Surface & Coatings Technology. 201: 7589-7596. DOI: 10.1016/J.Surfcoat.2007.02.025 |
0.783 |
|
| 2007 |
Ibrahim A, Berndt CC. Fatigue and deformation of HVOF sprayed WC–Co coatings and hard chrome plating Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 456: 114-119. DOI: 10.1016/J.Msea.2006.12.030 |
0.543 |
|
| 2006 |
Berndt CC, Montavon G. Thermal spray: preserving 100 years of technology Journal of Thermal Spray Technology. 15: 5-8. DOI: 10.1361/105996306X92406 |
0.314 |
|
| 2006 |
Michlik P, Berndt CC. Image-based extended finite element modeling of thermal barrier coatings Surface & Coatings Technology. 201: 2369-2380. DOI: 10.1016/J.Surfcoat.2006.04.003 |
0.73 |
|
| 2006 |
Racek O, Berndt CC, Guru DN, Heberlein J. Nanostructured and conventional YSZ coatings deposited using APS and TTPR techniques Surface and Coatings Technology. 201: 338-346. DOI: 10.1016/J.Surfcoat.2005.11.122 |
0.823 |
|
| 2005 |
Karthikeyan J, Berndt CC, Reddy S, Wang J, King AH, Herman H. Nanomaterial deposits formed by DC plasma spraying of liquid feedstocks Journal of the American Ceramic Society. 81: 121-128. DOI: 10.1111/J.1151-2916.1998.Tb02303.X |
0.415 |
|
| 2005 |
Gross KA, Gross V, Berndt CC. Thermal Analysis of Amorphous Phases in Hydroxyapatite Coatings Journal of the American Ceramic Society. 81: 106-112. DOI: 10.1111/J.1151-2916.1998.Tb02301.X |
0.406 |
|
| 2005 |
Leigh SH, Lin CK, Berndt CC. Elastic Response of Thermal Spray Deposits under Indentation Tests Journal of the American Ceramic Society. 80: 2093-2099. DOI: 10.1111/J.1151-2916.1997.Tb03093.X |
0.479 |
|
| 2005 |
Lee WY, Cooley FKM, Berndt CC, Joslin DL, Stinton DP. High-Temperature Chemical Stability of Plasma-Sprayed Ca05Sr05Zr4P6O24 Coatings on Nicalon/SiC Ceramic Matrix Composite and Ni-Based Superalloy Substrates Journal of the American Ceramic Society. 79: 2759-2762. DOI: 10.1111/J.1151-2916.1996.Tb09045.X |
0.619 |
|
| 2005 |
Palermo E, Si M, Occhiogrosso R, Berndt C, Rudomen G, Rafailovich M. Effects of Supercritical Carbon Dioxide on Phase Homogeneity, Morphology, and Mechanical Properties of Poly(styrene-blend-ethylene-stat-vinyl acetate) Macromolecules. 38: 9180-9186. DOI: 10.1021/Ma051335+ |
0.321 |
|
| 2004 |
Branco JRT, Gansert R, Sampath S, Berndt CC, Herman H. Solid particle erosion of plasma sprayed ceramic coatings Materials Research-Ibero-American Journal of Materials. 7: 147-153. DOI: 10.1590/S1516-14392004000100020 |
0.564 |
|
| 2004 |
Nakamura T, Qian G, Berndt CC. Effects of Pores on Mechanical Properties of Plasma‐Sprayed Ceramic Coatings Journal of the American Ceramic Society. 83: 578-584. DOI: 10.1111/J.1151-2916.2000.Tb01236.X |
0.537 |
|
| 2004 |
Leigh S, Berndt CC. Quantitative evaluation of void distributions within a plasma-sprayed ceramic Journal of the American Ceramic Society. 82: 17-21. DOI: 10.1111/J.1151-2916.1999.Tb01717.X |
0.324 |
|
| 2004 |
Yan FY, Gross KA, Simon GP, Berndt CC. Mechanical and erosion properties of CaCO 3-EMAA thermal sprayed coatings Polymer Engineering and Science. 44: 1448-1459. DOI: 10.1002/Pen.20141 |
0.585 |
|
| 2003 |
Boukari H, Allen AJ, Long GG, Ilavsky J, Wallace JS, Berndt CC, Herman H. Small-angle neutron scattering study of the role of feedstock particle size on the microstructural behavior of plasma-sprayed yttria-stabilized zirconia deposits Journal of Materials Research. 18: 624-634. DOI: 10.1557/Jmr.2003.0082 |
0.417 |
|
| 2003 |
Remesh K, Yu SCM, Ng HW, Berndt CC. Computational Study and Experimental Comparison of the In-Flight Particle Behavior for an External Injection Plasma Spray Process Journal of Thermal Spray Technology. 12: 508-522. DOI: 10.1361/105996303772082251 |
0.334 |
|
| 2003 |
Sun L, Berndt CC, Grey CP. Phase, structural and microstructural investigations of plasma sprayed hydroxyapatite coatings Materials Science and Engineering: A. 360: 70-84. DOI: 10.1016/S0921-5093(03)00439-8 |
0.6 |
|
| 2003 |
Yan FY, Gross KA, Simon GP, Berndt CC. Peel-strength behavior of bilayer thermal-sprayed polymer coatings Journal of Applied Polymer Science. 88: 214-226. DOI: 10.1002/App.11648 |
0.546 |
|
| 2002 |
Su L, Berndt CC, Gross KA. Hydroxyapatite/polymer composite flame-sprayed coatings for orthopedic applications. Journal of Biomaterials Science. Polymer Edition. 13: 977-90. PMID 12462458 DOI: 10.1163/156856202760319135 |
0.547 |
|
| 2002 |
Sun L, Berndt CC, Khor KA, Cheang HN, Gross KA. Surface characteristics and dissolution behavior of plasma-sprayed hydroxyapatite coating. Journal of Biomedical Materials Research. 62: 228-36. PMID 12209943 DOI: 10.1002/Jbm.10315 |
0.596 |
|
| 2002 |
Lima RS, Kucuk A, Berndt CC, Karthikeyan J, Kay CM, Lindemann J. Deposition efficiency, mechanical properties and coating roughness in cold-sprayed titanium Journal of Materials Science Letters. 21: 1687-1689. DOI: 10.1023/A:1020833011448 |
0.743 |
|
| 2002 |
Lima RS, Kucuk A, Berndt CC. Bimodal distribution of mechanical properties on plasma sprayed nanostructured partially stabilized zirconia Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 327: 224-232. DOI: 10.1016/S0921-5093(01)01530-1 |
0.762 |
|
| 2002 |
Lima RS, Karthikeyan J, Kay CM, Lindemann J, Berndt CC. Microstructural characteristics of cold-sprayed nanostructured WC-Co coatings Thin Solid Films. 416: 129-135. DOI: 10.1016/S0040-6090(02)00631-4 |
0.778 |
|
| 2001 |
Sun L, Berndt CC, Gross KA, Kucuk A. Material fundamentals and clinical performance of plasma-sprayed hydroxyapatite coatings: a review. Journal of Biomedical Materials Research. 58: 570-92. PMID 11505433 DOI: 10.1002/Jbm.1056 |
0.569 |
|
| 2001 |
Lima RS, Kucuk A, Senturk U, Berndt CC. Properties and microstructures of nanostructured alumina-13% titania + zirconia coatings Journal of Thermal Spray Technology. 10: 179-180. DOI: 10.1361/105996301770349637 |
0.782 |
|
| 2001 |
Kucuk A, Lima RS, Berndt CC. Influence of Plasma Spray Parameters on Formation and Morphology of ZrO2–8 wt% Y2O3 Deposits Journal of the American Ceramic Society. 84: 693-700. DOI: 10.1111/J.1151-2916.2001.Tb00728.X |
0.717 |
|
| 2001 |
Kucuk A, Lima RS, Berndt CC. Influence of Plasma Spray Parameters on In‐Flight Characteristics of ZrO2–8 wt% Y2O3 Ceramic Particles Journal of the American Ceramic Society. 84: 685-692. DOI: 10.1111/J.1151-2916.2001.Tb00727.X |
0.647 |
|
| 2001 |
Mancini CE, Berndt CC, Sun L, Kucuk A. Porosity determinations in thermally sprayed hydroxyapatite coatings Journal of Materials Science. 36: 3891-3896. DOI: 10.1023/A:1017905818479 |
0.487 |
|
| 2001 |
Allen AJ, Ilavsky J, Long GG, Wallace JS, Berndt CC, Herman H. Microstructural characterization of yttria-stabilized zirconia plasma-sprayed deposits using multiple small-angle neutron scattering Acta Materialia. 49: 1661-1675. DOI: 10.1016/S1359-6454(00)00393-1 |
0.361 |
|
| 2001 |
Lima RS, Kucuk A, Berndt CC. Integrity of nanostructured partially stabilized zirconia after plasma spray processing Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 313: 75-82. DOI: 10.1016/S0921-5093(01)01146-7 |
0.71 |
|
| 2001 |
Lima RS, Kucuk A, Berndt CC. Evaluation of microhardness and elastic modulus of thermally sprayed nanostructured zirconia coatings Surface & Coatings Technology. 135: 166-172. DOI: 10.1016/S0257-8972(00)00997-X |
0.79 |
|
| 2001 |
Kucuk A, Dambra CG, Berndt CC. Influence of Plasma Spray Parameters on the Cracking Behavior of Yttria Stabilized Zirconia Coatings Practical Failure Analysis. 1: 55-64. DOI: 10.1007/S11668-006-5015-2 |
0.567 |
|
| 2000 |
Kucuk A, Lima RS, Berndt CC. Composite coatings of Si3N4-soda lime silica produced by the thermal spray process Journal of Materials Engineering and Performance. 9: 603-608. DOI: 10.1361/105994900770345449 |
0.772 |
|
| 2000 |
Senturk U, Lima RS, Lima CRC, Berndt CC. Deformation of plasma sprayed thermal barrier coatings Journal of Engineering For Gas Turbines and Power-Transactions of the Asme. 122: 387-392. DOI: 10.1115/1.1287493 |
0.779 |
|
| 2000 |
Kucuk A, Berndt CC, Senturk U, Lima RS. Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. II: Acoustic emission response Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 284: 41-50. DOI: 10.1016/S0921-5093(00)00800-5 |
0.78 |
|
| 2000 |
Kucuk A, Berndt CC, Senturk U, Lima RS, Lima CRC. Influence of plasma spray parameters on mechanical properties of yttria stabilized zirconia coatings. I: Four point bend test Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 284: 29-40. DOI: 10.1016/S0921-5093(00)00799-1 |
0.783 |
|
| 1999 |
Leigh S, Berndt CC. Modelling of elastic constants of plasma spray deposits with ellipsoid-shaped voids Acta Materialia. 47: 1575-1586. DOI: 10.1016/S1359-6454(99)00019-1 |
0.394 |
|
| 1999 |
Ilavsky J, Long GG, Allen AJ, Berndt CC. Evolution of the void structure in plasma-sprayed YSZ deposits during heating Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 272: 215-221. DOI: 10.1016/S0921-5093(99)00450-5 |
0.342 |
|
| 1999 |
Callus PJ, Berndt CC. Relationships between the mode II fracture toughness and microstructure of thermal spray coatings Surface & Coatings Technology. 114: 114-128. DOI: 10.1016/S0257-8972(99)00018-3 |
0.538 |
|
| 1998 |
Gross KA, Berndt CC. Thermal processing of hydroxyapatite for coating production. Journal of Biomedical Materials Research. 39: 580-7. PMID 9492219 DOI: 10.1002/(Sici)1097-4636(19980315)39:4<580::Aid-Jbm12>3.0.Co;2-B |
0.523 |
|
| 1998 |
Gross KA, Berndt CC, Herman H. Amorphous phase formation in plasma-sprayed hydroxyapatite coatings. Journal of Biomedical Materials Research. 39: 407-14. PMID 9468049 DOI: 10.1002/(Sici)1097-4636(19980305)39:3<407::Aid-Jbm9>3.0.Co;2-N |
0.538 |
|
| 1998 |
Slifka AJ, Filla BJ, Phelps JM, Bancke G, Berndt CC. Thermal Conductivity of a Zirconia Thermal Barrier Coating Journal of Thermal Spray Technology. 7: 43-46. DOI: 10.1361/105996398770351016 |
0.562 |
|
| 1998 |
Montavon G, Coddet C, Berndt CC, Leigh SH. Microstructural Index to Quantify Thermal Spray Deposit Microstructures Using Image Analysis Journal of Thermal Spray Technology. 7: 229-241. DOI: 10.1361/105996398770350972 |
0.418 |
|
| 1998 |
Berndt CC, Brogan JA, Montavon G, Claudon A, Coddet C. Mechanical properties of metal- and ceramic-polymer composites formed via thermal spray consolidation—Extended abstract Journal of Thermal Spray Technology. 7: 337-339. DOI: 10.1361/105996398770350819 |
0.377 |
|
| 1998 |
Berndt CC, Lin CKCK, Leigh SH. Characterization of cracking within thermal spray deposits by an acoustic emission method: extended abstract Journal of Thermal Spray Technology. 7: 334-336. DOI: 10.1361/105996398770350800 |
0.376 |
|
| 1998 |
GROSS K, BERNDT C, STEPHENS P, DINNEBIER R. Journal of Materials Science. 33: 3985-3991. DOI: 10.1023/A:1004605014652 |
0.541 |
|
| 1998 |
Ibrahim A, Berndt CC. The effect of high-velocity oxygen fuel, thermally sprayed WC–Co coatings on the high-cycle fatigue of aluminium alloy and steel Journal of Materials Science. 33: 3095-3100. DOI: 10.1023/A:1004339705235 |
0.391 |
|
| 1998 |
Ilavsky J, Berndt CC. Thermal expansion properties of metallic and cermet coatings Surface & Coatings Technology. 102: 19-24. DOI: 10.1016/S0257-8972(97)00536-7 |
0.448 |
|
| 1998 |
Lin CK, Berndt CC. Acoustic emission studies on thermal spray materials Surface & Coatings Technology. 102: 1-7. DOI: 10.1016/S0257-8972(97)00531-8 |
0.479 |
|
| 1998 |
Qian G, Nakamura T, Berndt CC. Effects of thermal gradient and residual stresses on thermal barrier coating fracture Mechanics of Materials. 27: 91-110. DOI: 10.1016/S0167-6636(97)00042-2 |
0.361 |
|
| 1998 |
Berndt CC, Lavernia EJ. Thermal spray processing of nanoscale materials—A conference report with extended abstract Journal of Thermal Spray Technology. 7: 411-440. DOI: 10.1007/S11666-998-0058-4 |
0.429 |
|
| 1998 |
Brogan JA, Berndt CC, Simon GP, Hewitt D. Physical and relaxation properties of flame-sprayed ethylene-methacrylic acid copolymer Polymer Engineering and Science. 38: 1873-1881. DOI: 10.1002/Pen.10357 |
0.437 |
|
| 1997 |
Chraska T, King AH, Berndt CC, Karthikeyan J. Phase Transformation as a Function of Particle Size in Nanocrystalline Zirconia Mrs Proceedings. 481: 613. DOI: 10.1557/Proc-481-613 |
0.312 |
|
| 1997 |
Ilavsky J, Allen AJ, Long GG, Krueger S, Berndt CC, Herman H. Influence of Spray Angle on the Pore and Crack Microstructure of Plasma-Sprayed Deposits Journal of the American Ceramic Society. 80: 733-742. DOI: 10.1111/J.1151-2916.1997.Tb02890.X |
0.422 |
|
| 1997 |
Ilavsky J, Allen AJ, Long GG, Herman H, Berndt CC. Characterization of the closed porosity in plasma-sprayed alumina Journal of Materials Science. 32: 3407-3410. DOI: 10.1023/A:1018616632261 |
0.354 |
|
| 1997 |
Ilavsky J, Berndt CC, Karthikeyan J. Mercury intrusion porosimetry of plasma-sprayed ceramic Journal of Materials Science. 32: 3925-3932. DOI: 10.1023/A:1018612815364 |
0.367 |
|
| 1997 |
Brogan JA, Berndt CC. The coalescence of combustion-sprayed ethylene-methacrylic acid copolymer Journal of Materials Science. 32: 2099-2106. DOI: 10.1023/A:1018526906452 |
0.466 |
|
| 1997 |
Qian G, Nakamura T, Berndt CC, Leigh SH. Tensile toughness test and high temperature fracture analysis of thermal barrier coatings Acta Materialia. 45: 1767-1784. DOI: 10.1016/S1359-6454(96)00257-1 |
0.435 |
|
| 1997 |
Karthikeyan J, Berndt CC, Tikkanen J, Wang JY, King AH, Herman H. Nanomaterial powders and deposits prepared by flame spray processing of liquid precursors Nanostructured Materials. 8: 61-74. DOI: 10.1016/S0965-9773(97)00066-4 |
0.399 |
|
| 1997 |
Karthikeyan J, Berndt CC, Tikkanen J, Wang JY, King AH, Herman H. Preparation of nanophase materials by thermal spray processing of liquid precursors Nanostructured Materials. 9: 137-140. DOI: 10.1016/S0965-9773(97)00037-8 |
0.459 |
|
| 1997 |
Karthikeyan J, Berndt CC, Tikkanen J, Reddy S, Herman H. Plasma spray synthesis of nanomaterial powders and deposits Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing. 238: 275-286. DOI: 10.1016/S0921-5093(96)10568-2 |
0.421 |
|
| 1997 |
Montavon G, Sampath S, Berndt CC, Herman H, Coddet C. Effects of the spray angle on splat morphology during thermal spraying Surface & Coatings Technology. 91: 107-115. DOI: 10.1016/S0257-8972(96)03137-4 |
0.421 |
|
| 1997 |
Leigh SH, Berndt CC. Evaluation of off-angle thermal spray Surface & Coatings Technology. 89: 213-224. DOI: 10.1016/S0257-8972(96)02897-6 |
0.472 |
|
| 1997 |
Lin CK, Leigh SH, Berndt CC. Acoustic emission responses of plasma-sprayed alumina-3% titania deposits Thin Solid Films. 310: 108-114. DOI: 10.1016/S0040-6090(97)00366-0 |
0.393 |
|
| 1997 |
Wuttiphan S, Pajares A, Lawn BR, Berndt CC. Effect of substrate and bond coat on contact damage in zirconia-based plasma-sprayed coatings Thin Solid Films. 293: 251-260. DOI: 10.1016/S0040-6090(96)08992-4 |
0.508 |
|
| 1997 |
Montavon G, Coddet C, Sampath S, Herman H, Berndt CC. Quality control of the intrinsic deposition efficiency from the controls of the splat morphologies and the deposit microstructure Journal of Thermal Spray Technology. 6: 153-166. DOI: 10.1007/S11666-997-0007-7 |
0.366 |
|
| 1996 |
Knowles JC, Gross KA, Berndt CC, Bonfield W. Structural changes of thermally sprayed hydroxyapatite investigated by Rietveld analysis Biomaterials. 17: 639-645. PMID 8652783 DOI: 10.1016/0142-9612(96)88715-1 |
0.477 |
|
| 1996 |
Lee WY, Stinton DP, Berndt CC, Erdogan F, Lee Y, Mutasim Z. Concept of Functionally Graded Materials for Advanced Thermal Barrier Coating Applications Journal of the American Ceramic Society. 79: 3003-3012. DOI: 10.1111/J.1151-2916.1996.Tb08070.X |
0.513 |
|
| 1996 |
Pajares A, Wei L, Lawn BR, Berndt CC. Contact Damage in Plasma‐Sprayed Alumina‐Based Coatings Journal of the American Ceramic Society. 79: 1907-1914. DOI: 10.1111/J.1151-2916.1996.Tb08012.X |
0.565 |
|
| 1996 |
Pajares A, Wei L, Lawn BR, Padture NP, Berndt CC. Mechanical characterization of plasma sprayed ceramic coatings on metal substrates by contact testing Materials Science and Engineering A. 208: 158-165. DOI: 10.1016/0921-5093(95)10071-7 |
0.558 |
|
| 1996 |
Berndt CC. Thermal spraying in japan Journal of Thermal Spray Technology. 5: 352-367. DOI: 10.1007/Bf02645887 |
0.379 |
|
| 1995 |
Lin CK, Leigh SH, Gansert RV, Murakami K, Sampath S, Herman H, Berndt CC. Investigation of cracking mechanisms of plasma sprayed alumina-13% titania by acoustic emission Mrs Proceedings. 409: 261-266. DOI: 10.1557/Proc-409-261 |
0.32 |
|
| 1995 |
Lin C, Lin C, Berndt CC. Simulation of Hardness Testing on Plasma-Sprayed Coatings Journal of the American Ceramic Society. 78: 1406-1410. DOI: 10.1111/J.1151-2916.1995.TB08505.X |
0.411 |
|
| 1995 |
Sugama T, Kawase R, Berndt CC, Herman H. An evaluation of methacrylic acid-modified poly(ethylene) coatings applied by flame spray technology Progress in Organic Coatings. 25: 205-216. DOI: 10.1016/0300-9440(94)00507-W |
0.461 |
|
| 1995 |
Montavon G, Sampath S, Berndt CC, Herman H, Coddet C. Effects of Vacuum Plasma Spray Processing Parameters on Splat Morphology Journal of Thermal Spray Technology. 4: 67-74. DOI: 10.1007/Bf02648530 |
0.448 |
|
| 1995 |
Lin CK, Berndt CC. Statistical analysis of microhardness variations in thermal spray coatings Journal of Materials Science. 30: 111-117. DOI: 10.1007/Bf00352139 |
0.61 |
|
| 1994 |
Lin CK, Berndt CC. Measurement and analysis of adhesion strength for thermally sprayed coatings Journal of Thermal Spray Technology. 3: 75-104. DOI: 10.1007/Bf02649003 |
0.61 |
|
| 1994 |
Leigh SH, Berndt CC. A test for coating adhesion on flat substrates—a technical note Journal of Thermal Spray Technology. 3: 184-190. DOI: 10.1007/Bf02648276 |
0.401 |
|
| 1994 |
Berndt CC. The significance of Thermal Spray Awards Journal of Thermal Spray Technology. 3: 243-244. DOI: 10.1007/Bf02646267 |
0.421 |
|
| 1994 |
Gross KA, Berndt CC. In vitro testing of plasma-sprayed hydroxyapatite coatings Journal of Materials Science: Materials in Medicine. 5: 219-224. DOI: 10.1007/Bf00121092 |
0.583 |
|
| 1993 |
Berndt CC, Lin CK. Measurement of adhesion for thermally sprayed materials Journal of Adhesion Science and Technology. 7: 1235-1264. DOI: 10.1163/156856193X00088 |
0.568 |
|
| 1992 |
Berndt CC, Brindley W, Goland AN, Herman H, Houck DL, Jones K, Miller RA, Neiser R, Riggs W, Sampath S, Smith M, Spanne P. Current problems in plasma spray processing Journal of Thermal Spray Technology. 1: 341-356. DOI: 10.1007/Bf02647162 |
0.569 |
|
| 1992 |
Mair RH, Berndt CC. Wear of coatings in wool-severing applications Journal of Materials Science. 27: 6687-6694. DOI: 10.1007/Bf01165955 |
0.546 |
|
| 1991 |
Gross KA, Berndt CC. Thermal Spraying of Hydroxyapatite for Bioceramic Applications Key Engineering Materials. 124-129. DOI: 10.4028/Www.Scientific.Net/Kem.53-55.124 |
0.417 |
|
| 1991 |
Berndt CC. Thermal and Mechanical Properties of Thermal Barrier Coatings International Journal of Turbo and Jet Engines. 8. DOI: 10.1515/TJJ.1991.8.1-2.75 |
0.447 |
|
| 1990 |
Berndt CC. Tensile adhesion testing methodology for thermally sprayed coatings Journal of Materials Engineering. 12: 151-158. DOI: 10.1007/Bf02834068 |
0.612 |
|
| 1990 |
Callus PI, Berndt CC. Mode II fracture toughness test for thermally sprayed coatings International Journal of Fracture. 43: R57-R60. DOI: 10.1007/BF00035094 |
0.336 |
|
| 1989 |
Berndt C. Metallurgical coatings 1987 vol. IV Materials Science and Engineering: A. 114: 218. DOI: 10.1016/0921-5093(89)90867-8 |
0.493 |
|
| 1989 |
Berndt CC, Yi JH. The manufacture and microstructure of fiber-reinforced thermally sprayed coatings Surface and Coatings Technology. 37: 89-110. DOI: 10.1016/0257-8972(89)90123-0 |
0.608 |
|
| 1989 |
Berndt CC. Instrumented Tensile Adhesion Tests on Plasma Sprayed Thermal Barrier Coatings Journal of Materials Engineering. 11: 275-282. DOI: 10.1007/Bf02834137 |
0.568 |
|
| 1989 |
Berndt CC. Failure processes within ceramic coatings at high temperatures Journal of Materials Science. 24: 3511-3520. DOI: 10.1007/Bf02385733 |
0.563 |
|
| 1988 |
Ostojic P, Berndt CC. The variability in strength of thermally sprayed coatings Surface & Coatings Technology. 34: 43-50. DOI: 10.1016/0257-8972(88)90087-4 |
0.582 |
|
| 1988 |
Berndt CC. Thermal Spraying in Japan Jom. 40: 16-16. DOI: 10.1007/Bf03258788 |
0.379 |
|
| 1987 |
Berndt C. Coating Characterization and Testing Jom. 39: 18-18. DOI: 10.1007/BF03257564 |
0.433 |
|
| 1985 |
Berndt CC. Acoustic Emission Evaluation of Plasma-Sprayed Thermal Barrier Coatings Journal of Engineering For Gas Turbines and Power. 107: 142-146. DOI: 10.1115/1.3239674 |
0.504 |
|
| 1984 |
Miller RA, Berndt CC. Performance of thermal barrier coatings in high heat flux environments Thin Solid Films. 119: 195-202. DOI: 10.1016/0040-6090(84)90534-0 |
0.45 |
|
| 1984 |
Berndt CC, Miller RA. Failure analysis of plasma-sprayed thermal barrier coatings Thin Solid Films. 119: 173-184. DOI: 10.1016/0040-6090(84)90532-7 |
0.552 |
|
| 1984 |
Shankar NR, Herman H, Singhal SP, Berndt CC. Neutron and X-ray diffraction of plasma-sprayed zirconia-yttria thermal barrier coatings Thin Solid Films. 119: 159-171. DOI: 10.1016/0040-6090(84)90531-5 |
0.439 |
|
| 1983 |
Berndt CC, Herman H. Failure during thermal cycling of plasma-sprayed thermal barrier coatings Thin Solid Films. 108: 427-437. DOI: 10.1016/0040-6090(83)90123-2 |
0.609 |
|
| Show low-probability matches. |