Eldon D. Case - Publications

Affiliations: 
Materials Science and Engineering Michigan State University, East Lansing, MI 
Area:
Materials Science Engineering, Inorganic Chemistry

96 high-probability publications. We are testing a new system for linking publications to authors. You can help! If you notice any inaccuracies, please sign in and mark papers as correct or incorrect matches. If you identify any major omissions or other inaccuracies in the publication list, please let us know.

Year Citation  Score
2016 Ren F, Schmidt R, Keum JK, Qian B, Case ED, Littrell KC, An K. In situ neutron scattering study of nanoscale phase evolution in PbTe-PbS thermoelectric material Applied Physics Letters. 109. DOI: 10.1063/1.4961677  0.474
2016 Ren F, Schmidt R, Case ED, An K. In Situ Neutron Scattering Study of Nanostructured PbTe-PbS Bulk Thermoelectric Material Journal of Electronic Materials. 1-7. DOI: 10.1007/S11664-016-4802-0  0.476
2015 Schmidt RD, Fan X, Case ED, Sarac PB. Mechanical properties of Mg2Si thermoelectric materials with the addition of 0–4 vol% silicon carbide nanoparticles (SiCNP) Journal of Materials Science. DOI: 10.1007/S10853-015-8960-X  0.44
2014 Gao P, Lu X, Berkun I, Schmidt RD, Case ED, Hogan TP. Reduced lattice thermal conductivity in Bi-doped Mg2Si0.4Sn0.6 Applied Physics Letters. 105. DOI: 10.1063/1.4901178  0.453
2014 Lara-Curzio E, May AF, Delaire O, McGuire MA, Lu X, Liu CY, Case ED, Morelli DT. Low-temperature heat capacity and localized vibrational modes in natural and synthetic tetrahedrites Journal of Applied Physics. 115. DOI: 10.1063/1.4878676  0.389
2014 Gao P, Berkun I, Schmidt RD, Luzenski MF, Lu X, Bordon Sarac P, Case ED, Hogan TP. Transport and mechanical properties of high-ZT Mg2.08Si 0.4-x Sn0.6Sb x thermoelectric materials Journal of Electronic Materials. 43: 1790-1803. DOI: 10.1007/S11664-013-2865-8  0.446
2014 Schmidt RD, Case ED, Zhao LD, Kanatzidis MG. Mechanical properties of low-cost, earth-abundant chalcogenide thermoelectric materials, PbSe and PbS, with additions of 0–4 % CdS or ZnS Journal of Materials Science. 50: 1770-1782. DOI: 10.1007/S10853-014-8740-Z  0.492
2014 Schmidt RD, Case ED, Lobo Z, Thompson TR, Sakamoto JS, Zhou XY, Uher C. Influence of silver nanoparticle addition, porosity, and processing technique on the mechanical properties of Ba0.3Co4Sb 12 skutterudites Journal of Materials Science. 49: 7192-7212. DOI: 10.1007/S10853-014-8427-5  0.418
2013 Fan X, Case ED, Gheorghita I, Baumann MJ. Weibull modulus and fracture strength of highly porous hydroxyapatite. Journal of the Mechanical Behavior of Biomedical Materials. 20: 283-95. PMID 23478051 DOI: 10.1016/J.Jmbbm.2013.01.031  0.43
2013 Schock H, Brereton G, Case E, D'Angelo J, Hogan T, Lyle M, Maloney R, Moran K, Novak J, Nelson C, Panayi A, Ruckle T, Sakamoto J, Shih T, Timm E, et al. Prospects for Implementation of Thermoelectric Generators as Waste Heat Recovery Systems in Class 8 Truck Applications Journal of Energy Resources Technology-Transactions of the Asme. 135: 22001. DOI: 10.1115/1.4023097  0.429
2013 Ni JE, Case ED, Schmidt RD, Wu CI, Hogan TP, Trejo RM, Lara-Curzio E, Kanatzidis MG. Fracture mode, microstructure and temperature-dependent elastic moduli for thermoelectric composites of PbTe-PbS with SiC nanoparticle additions Philosophical Magazine. 93: 4412-4439. DOI: 10.1080/14786435.2013.833354  0.777
2013 Wolfenstine J, Jo H, Cho YH, David IN, Askeland P, Case ED, Kim H, Choe H, Sakamoto J. A preliminary investigation of fracture toughness of Li7La 3Zr2O12 and its comparison to other solid Li-ionconductors Materials Letters. 96: 117-120. DOI: 10.1016/J.Matlet.2013.01.021  0.317
2013 Schmidt RD, Case ED, Lehr GJ, Morelli DT. Room temperature mechanical properties of polycrystalline YbAl3, a promising low temperature thermoelectric material Intermetallics. 35: 15-24. DOI: 10.1016/J.Intermet.2012.11.019  0.537
2013 Fan X, Case ED, Yang Q, Nicholas JD. Room temperature elastic properties of gadolinia-doped ceria as a function of porosity Ceramics International. 39: 6877-6886. DOI: 10.1016/J.Ceramint.2013.02.022  0.453
2013 Ni JE, Case ED. Thermal fatigue of cast and hot-pressed lead-antimony-silver-tellurium (LAST) thermoelectric materials Journal of Electronic Materials. 42: 1382-1388. DOI: 10.1007/S11664-012-2254-8  0.778
2013 Schmidt RD, Case ED, Ni JE, Trejo RM, Lara-Curzio E, Korkosz RJ, Kanatzidis MG. High-temperature elastic moduli of thermoelectric SnTe1±x - Y SiC nanoparticulate composites Journal of Materials Science. 48: 8244-8258. DOI: 10.1007/S10853-013-7637-6  0.789
2013 Fan X, Case ED, Lu X, Morelli DT. Room temperature mechanical properties of natural-mineral-based thermoelectrics Journal of Materials Science. 48: 7540-7550. DOI: 10.1007/S10853-013-7569-1  0.517
2013 Ni JE, Case ED, Schmidt RD, Wu CI, Hogan TP, Trejo RM, Kirkham MJ, Lara-Curzio E, Kanatzidis MG. The thermal expansion coefficient as a key design parameter for thermoelectric materials and its relationship to processing-dependent bloating Journal of Materials Science. 48: 6233-6244. DOI: 10.1007/S10853-013-7421-7  0.793
2012 Fan X, Case ED, Ren F, Shu Y, Baumann MJ. Part II: fracture strength and elastic modulus as a function of porosity for hydroxyapatite and other brittle materials. Journal of the Mechanical Behavior of Biomedical Materials. 8: 99-110. PMID 22402157 DOI: 10.1016/J.Jmbbm.2011.12.014  0.412
2012 Fan X, Case ED, Ren F, Shu Y, Baumann MJ. Part I: porosity dependence of the Weibull modulus for hydroxyapatite and other brittle materials. Journal of the Mechanical Behavior of Biomedical Materials. 8: 21-36. PMID 22402151 DOI: 10.1016/J.Jmbbm.2011.12.010  0.381
2012 Schmidt RD, Case ED, Ni JE, Sakamoto JS, Trejo RM, Lara-Curzio E, Payzant EA, Kirkham MJ, Peascoe-Meisner RA. The temperature dependence of thermal expansion for p-type Ce 0.9Fe 3.5Co 0.5Sb 12 and n-type Co 0.95Pd 0.05Te 0.05Sb 3 skutterudite thermoelectric materials Philosophical Magazine. 92: 1261-1286. DOI: 10.1080/14786435.2011.644815  0.779
2012 Schmidt RD, Case ED, Ni JE, Sakamoto JS, Trejo RM, Lara-Curzio E. Temperature-dependent Young's modulus, shear modulus and Poisson's ratio of p -type Ce 0.9Fe 3.5Co 0.5Sb 12 and n -type Co 0.95Pd 0.05Te 0.05Sb 3 skutterudite thermoelectric materials Philosophical Magazine. 92: 727-759. DOI: 10.1080/14786435.2011.634847  0.774
2012 Morrison AQ, Case ED, Ren F, Baumann AJ, Kleinow DC, Ni JE, Hogan TP, D'Angelo J, Matchanov NA, Hendricks TJ, Karri NK, Cauchy C, Barnard J, Kanatzidis MG. Elastic modulus, biaxial fracture strength, electrical and thermal transport properties of thermally fatigued hot pressed LAST and LASTT thermoelectric materials Materials Chemistry and Physics. 134: 973-987. DOI: 10.1016/J.Matchemphys.2012.03.100  0.789
2012 Case ED. Thermal fatigue and waste heat recovery via thermoelectrics Journal of Electronic Materials. 41: 1811-1819. DOI: 10.1007/S11664-012-2083-9  0.459
2012 Schmidt RD, Case ED, Giles J, Ni JE, Hogan TP. Room-temperature mechanical properties and slow crack growth behavior of Mg 2Si thermoelectric materials Journal of Electronic Materials. 41: 1210-1216. DOI: 10.1007/S11664-011-1879-3  0.786
2012 Ni JE, Case ED, Stewart R, Wu CI, Hogan TP, Kanatzidis MG. Bloating in (Pb 0.95Sn 0.05Te) 0.92(PbS) 0.08-0.055%PbI 2 thermoelectric specimens as a result of processing conditions Journal of Electronic Materials. 41: 1153-1158. DOI: 10.1007/S11664-011-1853-0  0.764
2012 Wu CI, Todorov I, Kanatzidis MG, Timm E, Case ED, Schock H, Hogan TP. Thermoelectric properties of pulsed electric current sintered samples of AgPb m SbSe 17 (m = 16 or 17) Journal of Electronic Materials. 41: 1579-1582. DOI: 10.1007/S11664-011-1845-0  0.429
2012 Ni JE, Case ED, Sakamoto JS, Rangasamy E, Wolfenstine JB. Room temperature elastic moduli and Vickers hardness of hot-pressed LLZO cubic garnet Journal of Materials Science. 47: 7978-7985. DOI: 10.1007/S10853-012-6687-5  0.76
2012 Fan X, Case ED, Baumann MJ. The effect of indentation-induced microcracks on the elastic modulus of hydroxyapatite Journal of Materials Science. 47: 6333-6345. DOI: 10.1007/S10853-012-6556-2  0.397
2011 Matchanov NA, Farhan M, D'Angelo J, Timm EJ, Hogan TP, Schock H, Case ED, Kanatzidis MG. Investigation of the hot side contacts to nanostructured LASTt(T) material. Part i Applied Solar Energy (English Translation of Geliotekhnika). 47: 90-97. DOI: 10.3103/S0003701X11020137  0.353
2011 Wu CI, Girard SN, Sootsman J, Timm E, Case ED, Kanatzidis MG, Schock H, Chung DY, Hogan TP. Novel lead telluride based thermoelectric materials Materials Research Society Symposium Proceedings. 1314: 63-69. DOI: 10.1557/Opl.2011.517  0.508
2011 Ren F, Howe JY, Walker LR, Case ED, Lara-Curzio E. An in situ SEM experimental study of the thermal stability of a LAST thermoelectric material Philosophical Magazine Letters. 91: 443-451. DOI: 10.1080/09500839.2011.579583  0.506
2011 D'Angelo J, Case ED, Matchanov N, Wu CI, Hogan TP, Barnard J, Cauchy C, Hendricks T, Kanatzidis MG. Electrical, thermal, and mechanical characterization of novel segmented-leg thermoelectric modules Journal of Electronic Materials. 40: 2051-2062. DOI: 10.1007/S11664-011-1717-7  0.39
2010 Ni JE, Case ED, Khabir KN, Stewart RC, Wu CI, Hogan TP, Timm EJ, Girard SN, Kanatzidis MG. Room temperature Young's modulus, shear modulus, Poisson's ratio and hardness of PbTe-PbS thermoelectric materials Materials Science and Engineering B: Solid-State Materials For Advanced Technology. 170: 58-66. DOI: 10.1016/J.Mseb.2010.02.026  0.776
2010 Schmidt RD, Ni JE, Case ED, Sakamoto JS, Kleinow DC, Wing BL, Stewart RC, Timm EJ. Room temperature Young's modulus, shear modulus, and Poisson's ratio of Ce0.9Fe3.5Co0.5Sb12 and Co 0.95Pd0.05Te0.05Sb3 skutterudite materials Journal of Alloys and Compounds. 504: 303-309. DOI: 10.1016/J.Jallcom.2010.06.003  0.755
2010 Ren F, Case ED, Timm EJ, Lara-Curzio E, Trejo RM. Anomalous temperature-dependent Young's modulus of a cast LAST (Pb-Sb-Ag-Te) thermoelectric material Acta Materialia. 58: 31-38. DOI: 10.1016/J.Actamat.2009.08.054  0.495
2009 Wu C, Girard SN, Sootsman J, Timm E, Ni J, Schmidt R, Kanatzidis M, Schock H, Case ED, Chung DY, Hogan T. Thermoelectric Generators Made with Novel Lead Telluride Based Materials Mrs Proceedings. 1218. DOI: 10.1557/Proc-1218-Z02-11  0.75
2009 Liu C, Ren F, Wang H, Case ED, Morelli DT. SOLID-STATE SYNTHESIS AND SOME PROPERTIES OF MAGNESIUM-DOPED COPPER ALUMINUM OXIDES Mrs Proceedings. 1218. DOI: 10.1557/Proc-1218-Z01-05  0.39
2009 Ren F, Hall BD, Case ED, Timm EJ, Trejo RM, Meisner RA, Lara-Curzio E. Temperature-dependent thermal expansion of cast and hot-pressed LAST (Pb-Sb-Ag-Te) thermoelectric materials Philosophical Magazine. 89: 1439-1455. DOI: 10.1080/14786430903002376  0.5
2009 Ren F, Case ED, Morrison A, Tafesse M, Baumann MJ. Resonant ultrasound spectroscopy measurement of Young's modulus, shear modulus and Poisson's ratio as a function of porosity for alumina and hydroxyapatite Philosophical Magazine. 89: 1163-1182. DOI: 10.1080/14786430902915388  0.41
2009 Ren F, Case ED, Ni JE, Timm EJ, Lara-Curzio E, Trejo RM, Lin CH, Kanatzidis MG. Temperature-dependent elastic moduli of lead telluride-based thermoelectric materials Philosophical Magazine. 89: 143-167. DOI: 10.1080/14786430802607119  0.793
2009 Ren F, Case ED, Hall BD, Ni JE, Timm EJ, Wu CI, D'Angelo JJ, Hogan TP, Lara-Curzio E. Room-temperature mechanical properties of LAST (Pb-Sb-Ag-Te) thermoelectric materials as a function of cooling rate during ingot casting Philosophical Magazine Letters. 89: 267-275. DOI: 10.1080/09500830902817853  0.776
2009 Ni JE, Ren F, Case ED, Timm EJ. Porosity dependence of elastic moduli in LAST (Lead-antimony-silver-tellurium) thermoelectric materials Materials Chemistry and Physics. 118: 459-466. DOI: 10.1016/J.Matchemphys.2009.08.018  0.776
2009 Hall BD, Case ED, Ren F, Johnson JR, Timm EJ. Agglomeration during wet milling of LAST (lead-antimony-silver-tellurium) powders Materials Chemistry and Physics. 113: 497-502. DOI: 10.1016/J.Matchemphys.2008.07.112  0.358
2008 Ren F, Case ED, Timm EJ, Schock HJ. Hardness as a function of composition for n-type LAST thermoelectric material Journal of Alloys and Compounds. 455: 340-345. DOI: 10.1016/J.Jallcom.2007.01.086  0.43
2008 Ren F, Case ED, Sootsman JR, Kanatzidis MG, Kong H, Uher C, Lara-Curzio E, Trejo RM. The high-temperature elastic moduli of polycrystalline PbTe measured by resonant ultrasound spectroscopy Acta Materialia. 56: 5954-5963. DOI: 10.1016/J.Actamat.2008.07.055  0.484
2008 Ren F, Hall BD, Ni JE, Case ED, Sootsman J, Kanatzidis MG, DLara-Curzio E, Trejo RM, Timm EJ. Mechanical characterization of PbTe-based thermoelectric materials Materials Research Society Symposium Proceedings. 1044: 121-126.  0.794
2007 D'Angelo JJ, Timm EJ, Ren F, Hall BD, Case E, Schock H, Kanatzidis M, Chung DY, Hogan TP. Electrical Contact Fabrication and Measurements of Metals and Alloys to Thermoelectric Materials Mrs Proceedings. 1044. DOI: 10.1557/Proc-1044-U10-10  0.455
2007 Wu C, Timm EJ, Ren F, Hall BD, Ni J, Downey A, D'Angelo J, Short J, Schock H, Case E, Sootsman J, Han M, Kanatzidis M, Chung D, Hogan TP. Study on the Fabrication and Characterization of LAST and LASTT Based Thermoelectric Generators Mrs Proceedings. 1044. DOI: 10.1557/Proc-1044-U10-08  0.761
2007 Ren F, Hall BD, Ni JE, Case ED, Sootsman J, Kanatzidis MG, Lara-Curzio E, Trejo RM, Timm EJ. Mechanical Characterization of PbTe-based Thermoelectric Materials Mrs Proceedings. 1044. DOI: 10.1557/Proc-1044-U04-04  0.799
2007 Ren F, Case ED, Timm EJ, Schock HJ. Young's modulus as a function of composition for an n-type lead-antimony-silver-telluride (LAST) thermoelectric material Philosophical Magazine. 87: 4907-4934. DOI: 10.1080/14786430701589376  0.388
2007 Pilchak AL, Ren F, Case ED, Timm EJ, Schock HJ, Wu CI, Hogan TP. Characterization of dry milled powders of LAST (lead-antimony-silver- tellurium) thermoelectric material Philosophical Magazine. 87: 4567-4591. DOI: 10.1080/14786430701566044  0.384
2007 Hogan TP, Downey A, Short J, D'Angelo J, Wu CI, Quarez E, Androulakis J, Poudeu PFP, Sootsman JR, Chung DY, Kanatzidis MG, Mahanti SD, Timm EJ, Schock H, Ren F, ... ... Case ED, et al. Nanostructured thermoelectric materials and high-efficiency power-generation modules Journal of Electronic Materials. 36: 704-710. DOI: 10.1007/S11664-007-0174-9  0.485
2006 Singh D, de la Cinta Lorenzo-Martin M, Gutiérrez-Mora F, Routbort JL, Case ED. Self-joining of zirconia/hydroxyapatite composites using plastic deformation process. Acta Biomaterialia. 2: 669-75. PMID 16935578 DOI: 10.1016/J.Actbio.2006.06.004  0.386
2006 Smith IO, Baumann MJ, Case ED. Induced Microcracking Affects Osteoblast Attachment on Hydroxyapatite Scaffolds for Tissue Engineering American Journal of Biochemistry and Biotechnology. 2: 105-110. DOI: 10.3844/Ajbbsp.2006.105.110  0.306
2006 Ren F, Case ED, Timm EJ, Jacobs MD, Schock HJ. Weibull analysis of the biaxial fracture strength of a cast p-type LAST-T thermoelectric material Philosophical Magazine Letters. 86: 673-682. DOI: 10.1080/09500830600962720  0.389
2005 Singh D, de la Cinta Lorenzo-Martin M, Routbort JL, Gutiérrez-Mora F, Case ED. Plastic deformation of hydroxyapatites and its application to joining International Journal of Applied Ceramic Technology. 2: 247-255. DOI: 10.1111/J.1744-7402.2005.02024.X  0.358
2005 Case ED, Ren F, Kwon P, Kok CK, Rachedi R, Klenow B. Machining and Ceramic/Ceramic Joining to Form Internal Mesoscale Channels International Journal of Applied Ceramic Technology. 1: 95-103. DOI: 10.1111/J.1744-7402.2004.Tb00159.X  0.316
2005 Case ED, Smith IO, Baumann MJ. Microcracking and porosity in calcium phosphates and the implications for bone tissue engineering Materials Science and Engineering A. 390: 246-254. DOI: 10.1016/J.Msea.2004.08.021  0.309
2004 Shin H-, Kwon P, Kok CK, Case E. Machining Channels on Mesoscale Ceramic Components Journal of Manufacturing Processes. 6: 15-23. DOI: 10.1016/S1526-6125(04)70056-0  0.306
2004 Hoepfner TP, Case ED. An estimate of the critical grain size for microcracks induced in hydroxyapatite by thermal expansion anisotropy Materials Letters. 58: 489-492. DOI: 10.1016/S0167-577X(03)00531-7  0.349
2003 Zeng L, Case ED, Crimp MA. The interfacial microstructure of joined single crystal and polycrystalline alumina Materials Science and Engineering A. 360: 228-236. DOI: 10.1016/S0921-5093(03)00441-6  0.382
2003 Zeng L, Case ED, Crimp MA. Effects of a silica spin-on interlayer and heating mode on the joining of zirconia and MaCor™ Materials Science and Engineering A. 357: 67-74. DOI: 10.1016/S0921-5093(03)00247-8  0.401
2003 Hoepfner TP, Case ED. The influence of the microstructure on the hardness of sintered hydroxyapatite Ceramics International. 29: 699-706. DOI: 10.1016/S0272-8842(02)00220-1  0.321
2002 Hoepfner TP, Case ED. The porosity dependence of the dielectric constant for sintered hydroxyapatite. Journal of Biomedical Materials Research. 60: 643-50. PMID 11948523 DOI: 10.1002/Jbm.10131  0.348
2002 Lee JG, Case ED, Lee KY. Enhancing the microwave processing of ceramics by avoiding hot spots and local melting in refractory specimen enclosures Journal of Advanced Materials. 34: 49-59.  0.329
2001 Lee JG, Shin HW, Case ED, Kwon P. The fabrication of smooth, sub-millimeter open channels and internal channels in ceramics and ceramic composites without machining Journal of Materials Science Letters. 20: 107-109. DOI: 10.1023/A:1006773814611  0.33
2001 Zeng L, Case ED, Crimp MA. The interfacial microstructure of zirconia and MaCor joined using spin-on interlayers Materials Science and Engineering A. 307: 74-79. DOI: 10.1016/S0921-5093(00)01955-9  0.357
2001 Case ED, Crimp MA. Joining of ceramic materials using spin-on interlayers Advanced Engineering Materials. 3: 395-399. DOI: 10.1002/1527-2648(200106)3:6<395::Aid-Adem395>3.0.Co;2-A  0.354
1999 Lee KY, Case ED. Microwave sintering of alumina matrix zirconia composites using a single-mode microwave cavity Journal of Materials Science Letters. 18: 201-203. DOI: 10.1023/A:1006611829561  0.376
1999 Wilson BA, Case ED. Effect of humidity on crack healing in glass from in-situ investigations using an ESEM Journal of Materials Science. 34: 247-250. DOI: 10.1023/A:1004484901369  0.339
1999 Lee KY, Case ED. Steady-state temperature of microwave-heated refractories as a function of microwave power and refractory geometry Materials Science and Engineering A. 269: 8-20. DOI: 10.1016/S0921-5093(99)00121-5  0.32
1999 Case ED. Relationships among changes in electrical conductivity, thermal conductivity, thermal diffusivity, and elastic modulus for microcracked materials Ceramic Engineering and Science Proceedings. 20: 401-409.  0.316
1998 Fang P, Wong R, Koshkin V, Dmitriev Y, Koshkin V, Dmitriev Y, Roy R, Cherian KA, Cheng JP, Badzian A, Langlade C, Dewan H, Drawl W, Booske J, Cooper R, ... ... Case E, et al. Abstracts of Articles published in Materials Research Innovations 1 (2) Materials Technology. 13: 39-41. DOI: 10.1080/10667857.1998.11753156  0.311
1997 Wilson BA, Lee KY, Case ED. Diffusive crack-healing behavior in polycrystalline alumina: A comparison between microwave annealing and conventional annealing Materials Research Bulletin. 32: 1607-1616. DOI: 10.1016/S0025-5408(97)00150-5  0.351
1997 Lee KY, Cropsey LCG, Tyszka BR, Case ED. Grain size, density, and mechanical properties of alumina batch-processed in a single-mode microwave cavity Materials Research Bulletin. 32: 287-295. DOI: 10.1016/S0025-5408(96)00196-1  0.306
1997 Lee K, Case ED, Asmussen J. The steady-state temperature as a function of casket geometry for microwave-heated refractory caskets Materials Research Innovations. 1: 101-116. DOI: 10.1007/S100190050028  0.343
1996 Lee KY, Case ED, Asmussen J, Siegel M. Binder burn-out in a controlled single-mode microwave cavity Scripta Materialia. 35: 107-111. DOI: 10.1016/1359-6462(96)00102-9  0.362
1996 Lee KY, Case ED. Effects of adhesion on the effective Young's modulus in glass slide/glue laminates Journal of Materials Science. 31: 2253-2264. DOI: 10.1007/Bf01152934  0.344
1993 Wilson BA, Case ED. Comparison of mechanical fatigue with thermal fatigue in ceramics Scripta Metallurgica Et Materiala. 28: 1571-1576. DOI: 10.1016/0956-716X(93)90594-I  0.43
1993 Bansky J, Bartley D, Engemann J, Asmussen J, Case E, Connery S. Mechanical characteristics of hybrid multilayer green Tape™ ceramics sintered in a 2.45 GHz single mode microwave cavity Scripta Metallurgica Et Materiala. 28: 785-790. DOI: 10.1016/0956-716X(93)90353-T  0.455
1993 Kim Y, Case ED, Gaynor S. The effect of surface-limited microcracks on the effective Young's modulus of ceramics - Part III Experiments Journal of Materials Science. 28: 1910-1918. DOI: 10.1007/Bf00595764  0.375
1993 Lee WJ, Kim Y, Case ED. The effect of quenching media on the heat transfer coefficient of polycrystalline alumina Journal of Materials Science. 28: 2079-2083. DOI: 10.1007/Bf00367565  0.3
1992 Lee WJ, Case ED. Comparison of saturation behavior of thermal shock damage in a variety of brittle materials Materials Science and Engineering A. 154: 1-9. DOI: 10.1016/0921-5093(92)90356-6  0.422
1992 Chiu CC, Case ED. Computer simulation of the quench-induced strength degradation in glass plates Materials Science and Engineering A. 154: 207-213. DOI: 10.1016/0921-5093(92)90347-4  0.334
1992 Chiu CC, Case ED. Statistical study of the effect of subcritical crack growth on thermal shock resistance Journal of Materials Science. 27: 6707-6714. DOI: 10.1007/Bf01165958  0.38
1992 Chiu CC, Case ED. Influence of thermal quench on fracture strength, elastic modulus and internal friction of glass plates Journal of Materials Science. 27: 2353-2362. DOI: 10.1007/Bf01105043  0.421
1992 Chiu CC, Case ED. Prediction of a thermal shock damage map for glass plates Journal of Materials Science. 27: 1553-1559. DOI: 10.1007/Bf00542917  0.371
1992 Kim Y, Case ED. Time-dependent elastic modulus recovery measurement on thermally shocked SiC fibre-aluminosilicate composites, machinable glass ceramics and polycrystalline alumina Journal of Materials Science. 27: 1537-1545. DOI: 10.1007/Bf00542915  0.517
1992 Case ED, Kim Y, Lee WJ. Thermal fatigue of ceramics and ceramic composites International Sampe Electronics Conference. 24: 1123-1136.  0.317
1991 Chiu CC, Case ED. Elastic modulus determination of coating layers as applied to layered ceramic composites Materials Science and Engineering A. 132: 39-47. DOI: 10.1016/0921-5093(91)90359-U  0.306
1991 Kim Y, Lee WJ, Case ED. The measurement of the surface heat transfer coefficient for ceramics quenched into a water bath Materials Science and Engineering A. 145. DOI: 10.1016/0921-5093(91)90307-9  0.363
1990 White SC, Case ED. Characterization of fly ash from coal-fired power plants Journal of Materials Science. 25: 5215-5219. DOI: 10.1007/Bf00580153  0.355
1990 Lee WJ, Case ED. Thermal fatigue in polycrystalline alumina Journal of Materials Science. 25: 5043-5054. DOI: 10.1007/Bf00580128  0.414
1989 Lee WJ, Case ED. Cyclic thermal shock in SiC-whisker-reinforced alumina composite Materials Science and Engineering A. 119: 113-126. DOI: 10.1016/0921-5093(89)90530-3  0.405
1984 Case ED, Negas T. CHARACTERIZATION OF ELASTIC PROPERTIES AND MICROSTRUCTURE OF U. S. AND AUSTRALIAN SYNROC-B Advances in Ceramics. 8: 723-729.  0.327
Show low-probability matches.